Search

Localizing fast radio bursts (FRBs) to their host galaxies is an essential step to better understanding their origins and using them as cosmic probes. The CHIME/FRB Outrigger program aims to add VLBI-localization capabilities to CHIME, such that FRBs may be localized to tens of milliarcsecond precision at the time of their discovery, more than sufficient for host galaxy identification. The first-built outrigger telescope is KKO, located 66 kilometers west of CHIME. Cross-correlating KKO with CHIME can achieve arcsecond-scale localization in right ascension while avoiding the worst effects of the ionosphere. This paper presents measurements of KKO's performance throughout its commissioning phase, as well as a summary of its design and function. We demonstrate KKO's capabilities as a standalone instrument by producing full-sky images, mapping the angular and frequency structure of the primary beam, and measuring feed positions. To demonstrate the localization capabilities of the CHIME -- KKO baseline, we collected five separate observations each for a set of twenty bright pulsars, and aimed to measure their positions to within 5~arcseconds. All of these pulses were successfully localized to within this specification. The next two outriggers are expected to be commissioned in 2024, and will enable subarcsecond localizations for approximately hundreds of FRBs each year., Comment: 41 pages, 17 figures

The next generation of space-based mm-wave telescopes, such as JAXA's LiteBIRD mission, require focal planes with thousands of detectors in order to achieve their science goals. Digital frequency-domain multiplexing (dfmux) techniques allow detector counts to scale without a linear growth in wire harnessing, sub-Kelvin refrigerator loads, and other scaling problems. In this paper, we describe the Digital Signal Processing (DSP) firmware executed in the design's FPGA. This firmware is responsible for synthesizing bias tones, performing dynamic feedback control of the bolometer voltage bias and/or Superconducting Quantum Interference Device (SQUID) nuller currents, demodulating and decimating bolometer channels into science data, and streaming the results for storage and eventual downlink. We describe how this firmware has been tailored for LiteBIRD, including the control path, improvements to power- and resource-efficiency, the addition of radiation-mitigation functions, and the integration of new bolometer biasing schemes that may help mitigate mission-specific design challenges. This paper is a companion piece to the description of the electronics platform in which the firmware operates., Comment: SPIE Astronomical Telescopes + Instrumentation 2022, 16 pages

The next generation of space-based mm-wave telescopes, such as JAXA's LiteBIRD mission, require focal planes with thousands of detectors in order to achieve their science goals. Digital frequency-domain multiplexing (dfmux) techniques allow detector counts to scale without a linear growth in wire harnessing, sub-Kelvin refrigerator loads, and other scaling problems. In this paper, we introduce Technology Readiness Level 5 (TRL5) electronics suitable for biasing and readout of LiteBIRD's Transition Edge Sensor (TES) bolometers using dfmux techniques. These electronics sit between the spacecraft's payload computer and the cryogenic focal plane, and provide detector biasing, tuning, and readout interfaces between these detectors and the spacecraft's on-board storage. We describe the overall architecture of the electronics, including functional decomposition into modules, the numerology and interconnection of these modules, and their internal and external interfaces. We describe performance measurements to date, including power consumption, thermal performance, and mass, volume, and reliability estimates. This paper is a companion piece to a description of the electronics' on-board Field-Programmable Gate Array (FPGA) firmware., Comment: SPIE Astronomical Telescopes + Instrumentation 2022, 10 pages

We present a beam pattern measurement of the Canadian Hydrogen Intensity Mapping Experiment (CHIME) made using the Sun as a calibration source. As CHIME is a pure drift scan instrument, we rely on the seasonal North-South motion of the Sun to probe the beam at different elevations. This semiannual range in elevation, combined with the radio brightness of the Sun, enables a beam measurement which spans ~7,200 square degrees on the sky without the need to move the telescope. We take advantage of observations made near solar minimum to minimize the impact of solar variability, which is observed to be <10% in intensity over the observation period. The resulting data set is highly complementary to other CHIME beam measurements -- both in terms of angular coverage and systematics -- and plays an important role in the ongoing program to characterize the CHIME primary beam., Comment: 11 pages, 9 figures, Accepted by ApJ

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a drift scan radio telescope operating across the 400-800 MHz band. CHIME is located at the Dominion Radio Astrophysical Observatory near Penticton, BC Canada. The instrument is designed to map neutral hydrogen over the redshift range 0.8 to 2.5 to constrain the expansion history of the Universe. This goal drives the design features of the instrument. CHIME consists of four parallel cylindrical reflectors, oriented north-south, each 100 m $\times$ 20 m and outfitted with a 256 element dual-polarization linear feed array. CHIME observes a two degree wide stripe covering the entire meridian at any given moment, observing 3/4 of the sky every day due to Earth rotation. An FX correlator utilizes FPGAs and GPUs to digitize and correlate the signals, with different correlation products generated for cosmological, fast radio burst, pulsar, VLBI, and 21 cm absorber backends. For the cosmology backend, the $N_\mathrm{feed}^2$ correlation matrix is formed for 1024 frequency channels across the band every 31 ms. A data receiver system applies calibration and flagging and, for our primary cosmological data product, stacks redundant baselines and integrates for 10 s. We present an overview of the instrument, its performance metrics based on the first three years of science data, and we describe the current progress in characterizing CHIME's primary beam response. We also present maps of the sky derived from CHIME data; we are using versions of these maps for a cosmological stacking analysis as well as for investigation of Galactic foregrounds., Comment: 40 pages, 31 figures, 2 tables. Accepted by ApJS

The Hydrogen Intensity and Real-time Analysis eXperiment (HIRAX) is a radio interferometer array currently in development, with an initial 256-element array to be deployed at the South African Radio Astronomy Observatory (SARAO) Square Kilometer Array (SKA) site in South Africa. Each of the 6m, $f/0.23$ dishes will be instrumented with dual-polarisation feeds operating over a frequency range of 400-800 MHz. Through intensity mapping of the 21 cm emission line of neutral hydrogen, HIRAX will provide a cosmological survey of the distribution of large-scale structure over the redshift range of $0.775 < z < 2.55$ over $\sim$15,000 square degrees of the southern sky. The statistical power of such a survey is sufficient to produce $\sim$7 percent constraints on the dark energy equation of state parameter when combined with measurements from the Planck satellite. Additionally, HIRAX will provide a highly competitive platform for radio transient and HI absorber science while enabling a multitude of cross-correlation studies. In this paper, we describe the science goals of the experiment, overview of the design and status of the sub-components of the telescope system, and describe the expected performance of the initial 256-element array as well as the planned future expansion to the final, 1024-element array., Comment: 24 pages, 6 figures. Updated to match published version

Fast radio bursts (FRBs) are millisecond-duration flashes of radio waves that are visible at distances of billions of light-years. The nature of their progenitors and their emission mechanism remain open astrophysical questions. Here we report the detection of the multi-component FRB 20191221A and the identification of a periodic separation of 216.8(1) ms between its components with a significance of 6.5 sigmas. The long (~3 s) duration and nine or more components forming the pulse profile make this source an outlier in the FRB population. Such short periodicity provides strong evidence for a neutron-star origin of the event. Moreover, our detection favours emission arising from the neutron-star magnetosphere, as opposed to emission regions located further away from the star, as predicted by some models., Comment: Updated to conform to the accepted version

The third-generation South Pole Telescope camera is designed to measure the cosmic microwave background across three frequency bands (95, 150 and 220 GHz) with ~16,000 transition-edge sensor (TES) bolometers. Each multichroic pixel on a detector wafer has a broadband sinuous antenna that couples power to six TESs, one for each of the three observing bands and both polarization directions, via lumped element filters. Ten detector wafers populate the focal plane, which is coupled to the sky via a large-aperture optical system. Here we present the frequency band characterization with Fourier transform spectroscopy, measurements of optical time constants, beam properties, and optical and polarization efficiencies of the focal plane. The detectors have frequency bands consistent with our simulations, and have high average optical efficiency which is 86%, 77% and 66% for the 95, 150 and 220 GHz detectors. The time constants of the detectors are mostly between 0.5 ms and 5 ms. The beam is round with the correct size, and the polarization efficiency is more than 90% for most of the bolometers, Comment: Conference proceeding for Low Temperature Detectors 2017

We present results from a new incoherent-beam Fast Radio Burst (FRB) search on the Canadian Hydrogen Intensity Mapping Experiment (CHIME) Pathfinder. Its large instantaneous field of view (FoV) and relative thermal insensitivity allow us to probe the ultra-bright tail of the FRB distribution, and to test a recent claim that this distribution's slope, $\alpha\equiv-\frac{\partial \log N}{\partial \log S}$, is quite small. A 256-input incoherent beamformer was deployed on the CHIME Pathfinder for this purpose. If the FRB distribution were described by a single power-law with $\alpha=0.7$, we would expect an FRB detection every few days, making this the fastest survey on sky at present. We collected 1268 hours of data, amounting to one of the largest exposures of any FRB survey, with over 2.4\,$\times$\,10$^5$\,deg$^2$\,hrs. Having seen no bursts, we have constrained the rate of extremely bright events to $<\!13$\,sky$^{-1}$\,day$^{-1}$ above $\sim$\,220$\sqrt{(\tau/\rm ms)}$ Jy\,ms for $\tau$ between 1.3 and 100\,ms, at 400--800\,MHz. The non-detection also allows us to rule out $\alpha\lesssim0.9$ with 95$\%$ confidence, after marginalizing over uncertainties in the GBT rate at 700--900\,MHz, though we show that for a cosmological population and a large dynamic range in flux density, $\alpha$ is brightness-dependent. Since FRBs now extend to large enough distances that non-Euclidean effects are significant, there is still expected to be a dearth of faint events and relative excess of bright events. Nevertheless we have constrained the allowed number of ultra-intense FRBs. While this does not have significant implications for deeper, large-FoV surveys like full CHIME and APERTIF, it does have important consequences for other wide-field, small dish experiments.

New generation radio interferometers encode signals from thousands of antenna feeds across large bandwidth. Channelizing and correlating this data requires networking capabilities that can handle unprecedented data rates with reasonable cost. The Canadian Hydrogen Intensity Mapping Experiment (CHIME) correlator processes 8-bits from N=2048 digitizer inputs across 400~MHz of bandwidth. Measured in $N^2~\times $ bandwidth, it is the largest radio correlator that has been built. Its digital back-end must exchange and reorganize the 6.6~terabit/s produced by its 128 digitizing and channelizing nodes, and feed it to the 256-node spatial correlator in a way that each node obtains data from all digitizer inputs but across a small fraction of the bandwidth (i.e. `corner-turn'). In order to maximize performance and reliability of the corner-turn system while minimizing cost, a custom networking solution has been implemented. The system makes use of Field Programmable Gate Array (FPGA) transceivers to implement direct, passive, full-mesh, high speed serial connections between sixteen circuit boards in a crate, to exchange data between crates, and to offload the data to a cluster of 256 graphics processing unit (GPU) nodes using standard 10~Gbit/s Ethernet links. The GPU nodes complete the corner-turn by combining data from all crates and then computing visibilities. Eye diagrams and frame error counters confirm error-free operation of the corner-turn network in both the currently operating CHIME Pathfinder telescope (a prototype for the full CHIME telescope) and a representative fraction of the full CHIME hardware providing an end-to-end system validation. An analysis of an equivalent corner-turn system built with Ethernet switches instead of custom passive data links is provided.

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) Pathfinder radio telescope is currently surveying the northern hemisphere between 400 and 800 MHz. By mapping the large scale structure of neutral hydrogen through its redshifted 21 cm line emission between $z \sim 0.8-2.5$ CHIME will contribute to our understanding of Dark Energy. Bright astrophysical foregrounds must be separated from the neutral hydrogen signal, a task which requires precise characterization of the polarized telescope beams. Using the DRAO John A. Galt 26 m telescope, we have developed a holography instrument and technique for mapping the CHIME Pathfinder beams. We report the status of the instrument and initial results of this effort., Comment: 16 pages, 9 figures. Submitted to Proc. SPIE, Astronomical Telescopes + Instrumentation (2016)

We present the design and implementation of a custom GPU-based compute cluster that provides the correlation X-engine of the CHIME Pathfinder radio telescope. It is among the largest such systems in operation, correlating 32,896 baselines (256 inputs) over 400MHz of radio bandwidth. Making heavy use of consumer-grade parts and a custom software stack, the system was developed at a small fraction of the cost of comparable installations. Unlike existing GPU backends, this system is built around OpenCL kernels running on consumer-level AMD GPUs, taking advantage of low-cost hardware and leveraging packed integer operations to double algorithmic efficiency. The system achieves the required 105TOPS in a 10kW power envelope, making it among the most power-efficient X-engines in use today., Comment: 6 pages, 5 figures. Accepted by IEEE ASAP 2015

Frequency domain multiplexing (fMux) is an established technique for the readout of transition-edge sensor (TES) bolometers in millimeter-wavelength astrophysical instrumentation. In fMux, the signals from multiple detectors are read out on a single pair of wires reducing the total cryogenic thermal loading as well as the cold component complexity and cost of a system. The current digital fMux system, in use by POLARBEAR, EBEX, and the South Pole Telescope, is limited to a multiplexing factor of 16 by the dynamic range of the Superconducting Quantum Interference Device pre-amplifier and the total system bandwidth. Increased multiplexing is key for the next generation of large format TES cameras, such as SPT-3G and POLARBEAR2, which plan to have on the of order 15,000 detectors. Here, we present the next generation fMux readout, focusing on the warm electronics. In this system, the multiplexing factor increases to 64 channels per module (2 wires) while maintaining low noise levels and detector stability. This is achieved by increasing the system bandwidth, reducing the dynamic range requirements though active feedback, and digital synthesis of voltage biases with a novel polyphase filter algorithm. In addition, a version of the new fMux readout includes features such as low power consumption and radiation-hard components making it viable for future space-based millimeter telescopes such as the LiteBIRD satellite., Comment: 15 pages, 10 figures. To be published in Proceedings of SPIE Volume 9153. Presented at SPIE Astronomical Telescopes + Instrumentation 2014, conference 9153

A pathfinder version of CHIME (the Canadian Hydrogen Intensity Mapping Experiment) is currently being commissioned at the Dominion Radio Astrophysical Observatory (DRAO) in Penticton, BC. The instrument is a hybrid cylindrical interferometer designed to measure the large scale neutral hydrogen power spectrum across the redshift range 0.8 to 2.5. The power spectrum will be used to measure the baryon acoustic oscillation (BAO) scale across this poorly probed redshift range where dark energy becomes a significant contributor to the evolution of the Universe. The instrument revives the cylinder design in radio astronomy with a wide field survey as a primary goal. Modern low-noise amplifiers and digital processing remove the necessity for the analog beamforming that characterized previous designs. The Pathfinder consists of two cylinders 37\,m long by 20\,m wide oriented north-south for a total collecting area of 1,500 square meters. The cylinders are stationary with no moving parts, and form a transit instrument with an instantaneous field of view of $\sim$100\,degrees by 1-2\,degrees. Each CHIME Pathfinder cylinder has a feedline with 64 dual polarization feeds placed every $\sim$30\,cm which Nyquist sample the north-south sky over much of the frequency band. The signals from each dual-polarization feed are independently amplified, filtered to 400-800\,MHz, and directly sampled at 800\,MSps using 8 bits. The correlator is an FX design, where the Fourier transform channelization is performed in FPGAs, which are interfaced to a set of GPUs that compute the correlation matrix. The CHIME Pathfinder is a 1/10th scale prototype version of CHIME and is designed to detect the BAO feature and constrain the distance-redshift relation., Comment: 20 pages, 12 figures. submitted to Proc. SPIE, Astronomical Telescopes + Instrumentation (2014)

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a transit interferometer currently being built at the Dominion Radio Astrophysical Observatory (DRAO) in Penticton, BC, Canada. We will use CHIME to map neutral hydrogen in the frequency range 400 -- 800\,MHz over half of the sky, producing a measurement of baryon acoustic oscillations (BAO) at redshifts between 0.8 -- 2.5 to probe dark energy. We have deployed a pathfinder version of CHIME that will yield constraints on the BAO power spectrum and provide a test-bed for our calibration scheme. I will discuss the CHIME calibration requirements and describe instrumentation we are developing to meet these requirements.

A prototype 425-850 MHz Radio-Frequency-over-Fiber (RFoF) link for the Canadian Hydrogen Intensity Mapping Experiment (CHIME) is presented. The design is based on a directly modulated Fabry-Perot (FP) laser, operating at ambient temperature, and a single-mode fiber. The dynamic performance, gain stability, and phase stability of the RFoF link are characterized. Tests on a two-element interferometer built at the Dominion Radio Astrophysical Observatory for CHIME prototyping demonstrate that RFoF can be successfully used as a cost-effective solution for analog signal transport on the CHIME telescope and other large-array radio astronomy applications, Comment: 17 pages, 13 figures; submitted to Journal of Instrumentation (JINST). This preprint is under review