Search

BACKGROUND RESULTS CONCLUSION This study used single‐factor experiments and response surface methodology to optimize ultrasound time (10–50 min), particle size (0–80 mesh) and extraction time (60–180 min) for the ultrasound‐assisted extraction of rosemary essential oil (REO). The resulting REO (0–2.5%, w/w) was then incorporated into citrus pectin (CP) to prepare CP/REO composite films before determining their microstructure, mechanical, barrier and antioxidant properties, alongside their ability to improve the shelf life of chilled beef.A sonication time of 41 min, a crushing degree of 40 mesh and an extraction time of 135 min were optimum for extracting 1.91% of REO, with the essential oil also showing good antioxidant activity. Characterization of the composite film further revealed that CP had an excellent film‐forming ability and that REO was uniformly distributed in the pectin matrix through hydrogen bonding. The film displayed optimum mechanical and barrier properties at an REO concentration of 1.5% which also significantly enhanced antioxidant activity. Furthermore, the CP/1.5 REO film reduced the total viable count, delayed oxidative rancidity and maintained good color during beef storage, thereby extending the latter's shelf life by 6 days.The novel food packaging film could successfully maintain the quality of chilled meat. © 2024 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Mustard essential oil (MEO) nanoemulsions fortified with citrus pectin and tween-80 (MEO-NE-PT) or tween-80 (MEO-NE-T) were prepared by high-pressure homogenization followed by ultrasonication, and comparative analysis was performed on the microstructure, storage stability, pH, ionic strength and thermal tolerance between MEO-NE-PT and MEO-NE-T. The application of MEO-NE-PT to the postharvest preservation of ‘Shatangju’ mandarin was evaluated. It was found that MEO-NE-PT exhibited superior stability with smaller fluctuations in particle size and polydispersity index (PDI). The minimum inhibitory concentration (MIC) of MEO-NE-PT was 64 μL/L, much lower than those of MEO (256 μL/L) and MEO-NE-T (128 μL/L). Furthermore, after MEO-NE-PT treatment at 64 μL/L for 6 h, the germination rate of Geotrichum candidum spores was only 6.67%, and the length of the germ tube was only 8.57 μm, both significantly lower than 100% and 165.02 μm for the control group (MEO), respectively. The results of scanning electron microscopy (SEM) revealed that treatment with MEO-NE-PT caused the mycelium of Geotrichum candidum to wrinkle and break apart. Compared with the control group, MEO-NE-PT treatment could significantly reduce the decay rate and quality loss of ‘Shatangju’ mandarin, while delaying the decline in hardness and total soluble solids. As a safe and effective antimicrobial agent, MEO-NE-PT could control the growth of Geotrichum candidum and maintain the post-harvest quality of ‘Shatangju’ mandarin.

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Summary: This study aimed at the solution of stability problems of extra virgin olive oil rich (oil:aqueous phase ratio = 50:50) model oil‐in‐water emulsions prepared with pectin using green tea (GTE) and grape seed extracts (GSE), and (+)‐catechin (CAT). Olive oil‐in‐water emulsion prepared with pectin at 0.5% (w/v) without phenolics lost 36% of its stability within 1 day. GTE at 1% (w/v) caused a limited increase in emulsion stability while emulsions with GSE at ≥0.25% or CAT at 1% maintained >90% of their stability after 14 days. GSE and CAT reduced the emulsion droplet size (2.6‐ and 1.9‐fold) while GTE increased the emulsion droplet size (1.5‐fold). Emulsions with GSE showed the smallest and most densely packed lipid droplets. The highest phenolic content and antioxidant activity in emulsions were obtained with CAT followed by GSE and GTE. This work is significant in that it showed the possibility of using GSE to obtain stable extra virgin olive oil emulsion‐based functional foods. [ABSTRACT FROM AUTHOR]

This study examined the effect of magneto-induced electric field (MIEF) treatment under varying pH conditions on the physicochemical, structural, and rheological properties of citrus pectin (CP). The results indicate that as the pH increased (to 4.0, 7.0, and 10.0), the molecular weight, degree of esterification, and galacturonic acid content of CP decreased. At pH values of 4.0 and 7.0, MIEF treatment caused fractures in the side chains of CP, while at pH 10.0, the main chain broke. MIEF treatment under these conditions enhanced the steady-state fluid behavior and dynamic viscoelastic properties of CP by promoting increased entanglements of neutral sugar side chains. Overall, the combined effect of pH and MIEF led to the breakdown of the main or side chains of CP, reducing its molecular weight and thereby influencing its rheological properties. In effect, this study provides a green modification technique for CP and its application to functional foods.

Crispbread is gaining popularity as a healthy snack or bread substitute. This is a lightweight dry type of flat food that stays fresh for a very long time due to its lack of water and usually contains different types of grain flour, including gluten-containing wheat or rye flour. The incorporation of legume purée into crispbread represents an innovative approach to enhancing the nutritional profile and taste of the product. The rheological properties of various legume purées (chickpea, white bean, black bean, and red bean) mixed with citrus pectin were examined, revealing significant differences in fluid behavior and viscosity. Crispbread formulations were analyzed for water content and activity, color, structure, FT-IR spectra, water vapor adsorption isotherms, and sensory evaluation. The results showed the possibility of obtaining crispbread based on the purée of legumes and citrus pectin. Crispbread enriched with red bean purée exhibited low water activity (0.156) and water content (3.16%), along with a continuous porous structure, and received the highest sensory evaluation score among the products. These findings can be treated as a basis for the development of other innovative recipes and combinations using legumes. [ABSTRACT FROM AUTHOR]

Copyright of Food & Fermentation Industries is the property of Food & Fermentation Industries and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper presents the development of an environmentally friendly, small molecular depressant citrus pectin for improving the recovery of cassiterite resources. Citrus pectin extracted from citrus peel was utilized as the depressant, and it demonstrated significant potential in separating calcite from cassiterite in micro-flotation tests. The molecular weight of the citrus pectin extracted in this paper decreased from 11,485,412 Da to 32,959 Da compared to commercial pectin, resulting in the depressant efficiency of the reagent. The results of a zeta potential and adsorption test indicated that citrus pectin had less and weaker adsorption on the cassiterite surface and could be replaced with NaOL. The chemical adsorption process of citrus pectin on the surface of calcite was determined through FTIR spectroscopy analysis. XPS analysis results indicated that the interaction between the carboxyl groups of citrus pectin and calcium atoms enables adsorption to occur. The AFM revealed that citrus pectin displayed a uniform and dense pattern of point-like adsorption on the surface of calcite. Micro-flotation experiments showed that cassiterite recovery of 80% can be obtained at a citrus pectin dosage of 10 mg/L. Citrus pectin has the advantages of being low-cost, highly selective, and environmentally suitable, making it a promising alternative to conventional reagents. [ABSTRACT FROM AUTHOR]

Given that pectin is a well-known substance used for drug delivery, we aimed to obtain and further examine the efficacy of interpolyelectrolyte complexes based on citrus or apple pectin and the Eudragit® EPO for using these carriers in oral drug delivery. To characterize the physicochemical properties of these compounds, turbidity, gravimetry, viscosity, elementary analysis, FTIR spectroscopy, and DSC analysis were utilized. Diffusion transport characteristics were evaluated to assess the swelling ability of the matrices and the release of diclofenac sodium. To examine the release parameters, mathematical modeling was performed by using the Korsmayer–Peppas and Logistic equations as well. During the turbidity study, stoichiometry compositions were selected for the developed IPECs EPO/PecA and EPO/PecC at pH values = 4.0, 5.0, 6.0, and 7.0. The FTIR spectra of the complexes were characterized by an increase in the intensity of the bands at 1610 cm−1 and 1400 cm−1. According to the DSC analysis, IPEC has a certain Tg = 57.3 °C. The highest release rates were obtained for IPEC EPO/PecC_1 and EPO/PecC_4. The mechanism of drug transport from the matrices IPEC EPO/PecC, IPEC EPO/PecA_3, and EPO/PecA_4 can be characterized as Super Case II. Anomalous release (non-Fickian release) is typical for IPEC EPO/PecA_1 and EPO/PecA_2. Thus, the resulting systems can be further used for the effective delivery of the drugs to the colon. [ABSTRACT FROM AUTHOR]

New citrus pectin derivatives carrying pendant N,N-dimethyl-N-alkyl-N-(2-hydroxy propyl) ammonium chloride groups were achieved via polysaccharide derivatization with a mixture of N,N-dimethyl-N-alkyl amine (alkyl = ethyl, butyl, benzyl, octyl, dodecyl) and epichlorohydrin in aqueous solution. The structural characteristics of the polymers were examined via elemental analysis, conductometric titration, Fourier Transform Infrared spectroscopy (FTIR) and 1D (1H and 13C) nuclear magnetic resonance (NMR). Capillary viscosity measurements allowed for the study of viscometric behavior as well as the determination of viscosity–average molar mass for pristine polysaccharide and intrinsic viscosity ([η]) values for pectin and its derivatives. Dynamic light scattering measurements (DLS) showed that pectin-based polymers formed aggregates in aqueous solution with a unimodal distribution. Critical aggregation concentration (cac) for the hydrophobic pectin derivatives were determined using fluorescence spectroscopy. Atom force microscopy (AFM) images allowed for the investigation of the morphology of polymeric populations obtained in aqueous solution, consisting of flocs and aggregates for crude pectin and its hydrophilic derivatives and well-organized aggregates for lipophilic pectin derivatives. Antimicrobial activity, examined using the disc diffusion method, proved that all polymers were active against Staphylococcus aureus bacterium and Candida albicans yeast. [ABSTRACT FROM AUTHOR]

Background: Citrus residuals are rich in nutrients like pectin, essential oil, and amino acids, which are wasted in the food industry. Moreover, citrus components often coexist with amino acids during emulsion preparation and application. Results: Adding glutamic or arginine after emulsification resulted in a stable emulsion compared with adding them before emulsification. Adding glycine before or after emulsification had no effect on the emulsion stability. Emulsion stability was improved by adding glutamic acid at pH 6. Ionic interaction and hydrogen bonding were the main forms of bonding. The rhamnogalacturonan II domain was the potential binding site for the amino acids. Conclusions: The emulsions prepared by adding acidic amino acids or basic amino acids after emulsification were stable relative to those in which the amino acids were added before emulsification. However, the order in which neutral amino acids were added did not affect the emulsion stability after storage for 7 days. With an increase in the pH level, droplet size increased and emulsion stability decreased. All the results could be attributed to changes in the structure and properties of citrus pectin, as well as the interaction between citrus pectin and amino acids. This study may expand the application of citrus‐derived emulsions in the food industry. © 2023 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Crispbread is gaining popularity as a healthy snack or bread substitute. This is a lightweight dry type of flat food that stays fresh for a very long time due to its lack of water and usually contains different types of grain flour, including gluten-containing wheat or rye flour. The incorporation of legume purée into crispbread represents an innovative approach to enhancing the nutritional profile and taste of the product. The rheological properties of various legume purées (chickpea, white bean, black bean, and red bean) mixed with citrus pectin were examined, revealing significant differences in fluid behavior and viscosity. Crispbread formulations were analyzed for water content and activity, color, structure, FT-IR spectra, water vapor adsorption isotherms, and sensory evaluation. The results showed the possibility of obtaining crispbread based on the purée of legumes and citrus pectin. Crispbread enriched with red bean purée exhibited low water activity (0.156) and water content (3.16%), along with a continuous porous structure, and received the highest sensory evaluation score among the products. These findings can be treated as a basis for the development of other innovative recipes and combinations using legumes.

This paper presents the development of an environmentally friendly, small molecular depressant citrus pectin for improving the recovery of cassiterite resources. Citrus pectin extracted from citrus peel was utilized as the depressant, and it demonstrated significant potential in separating calcite from cassiterite in micro-flotation tests. The molecular weight of the citrus pectin extracted in this paper decreased from 11,485,412 Da to 32,959 Da compared to commercial pectin, resulting in the depressant efficiency of the reagent. The results of a zeta potential and adsorption test indicated that citrus pectin had less and weaker adsorption on the cassiterite surface and could be replaced with NaOL. The chemical adsorption process of citrus pectin on the surface of calcite was determined through FTIR spectroscopy analysis. XPS analysis results indicated that the interaction between the carboxyl groups of citrus pectin and calcium atoms enables adsorption to occur. The AFM revealed that citrus pectin displayed a uniform and dense pattern of point-like adsorption on the surface of calcite. Micro-flotation experiments showed that cassiterite recovery of 80% can be obtained at a citrus pectin dosage of 10 mg/L. Citrus pectin has the advantages of being low-cost, highly selective, and environmentally suitable, making it a promising alternative to conventional reagents.

Colloidal matrices of native and oxidized pectin were developed to improve iron bioavailability through the digestive tract. Ferrous bisglycinate (Gly-Fe), obtained by precipitation of glycine chelation to Fe2+, was mixed with native and peroxide-oxidized citrus pectin, and subsequently lyophilized. Controls included matrices with iron and glycine without chelation. The resulting samples were characterized through FTIR, SEM, and TGA/DSC before and after in vitro digestion, which was performed in simulated salivary, gastric, and intestinal fluids. During these digestions, swelling capacity and iron release were assessed. All matrix formulations were porous, and while pectin oxidation did not alter architecture, it changed their properties, increasing thermal stability, likely due to greater number of interaction possibilities through carbonyl groups generated during oxidation. This also resulted in lower swelling capacity, with greater stability observed when using the chelated complex. Higher swelling was found in gastric and intestinal fluids. Pectin oxidation also increased retention of the chelated form, contrary to what was observed with unchelated iron. Thus, there is an important effect of pectin oxidation combined with iron in the form of ferrous biglyscinate on matrix stability and iron release through the digestive tract. These matrices could potentially improve iron bioavailability, diminishing organoleptic changes in fortified iron foods. [ABSTRACT FROM AUTHOR]

Fructo-oligosaccharide (FOS) and pectin are known soluble dietary fibers and can influence gut microbiota and consequently modulate gut health. To understand the differential impact patterns of pectin vs. FOS in modulating gut microbiota in the small and large intestine, an ileal-cannulated pig model was adopted to compare the temporal and spatial effects of FOS and citrus pectin (CP) on the gut microbiota. Sixteen terminal ileal-cannulated pigs were randomly divided into 2 groups and fed with a standard diet supplemented with either 3% FOS or 3% CP for 28 d. The CP group and FOS group showed different microbial composition, especially in the feces, with time and location as major factors affecting microbiota in the CP group, and with only location contribution in the FOS group. In the feces, relative to the FOS group, the CP group showed higher abundance of Christensenellaceae R-7 group and Ruminococcaceae UCG-010 and lower abundance of Mitsuokella and Olsenella (adjusted P

The purpose of this work was to research the encapsulation of lactic acid bacteria (LAB) of the probiotic "Evitalia" in pectic gel particles (PGPs) formed on the basis of apple pectin and citrus pectin. Methods and Results: Commercial apple pectin (AP) AU701 (Herbstreith & Fox KG, Germany) and citrus pectin (CP) CU701 (Herbstreith & Fox KG, Germany) were used. Gel particles were prepared from 3% aqueous solutions of pectins in the presence of 0.34M CaCl2 by ionotropic gelation. The diameter and density of PGPs were determined using an optical microscope (ALTAMI, Russia). For encapsulation in PGPs, a complex of "Evitalia" dry probiotic microorganisms was used, which consists of freeze-dried strains of Lactococcus lactis, Streptococcus thermophilus, Lactobacillus acidophilus, Lactobacillus helveticus, and Propionibacterium freudenreichii ssp. shermanii. To accumulate cells of probiotic LAB, we used a modified MRS medium. An extrusion method was used to encapsulate probiotic cells in PGPs. In the study of probiotic-encapsulated PGPs, they were preliminarily destroyed by ultrasound in an HD2070 ultrasonic homogenizer (Sonopuls, Germany). The encapsulation efficiency of the formulation for the probiotic bacteria was determined according to the formula: Encapsulation efficiency (%) = Bacteria in the capsules (CFU/ml) / Bacteria in initial cell suspension (CFU/ml) × 100. "Evitalia" probiotic cells (PC) were grown on three different nutrient media: MRS medium, milk medium, and glucose-peptone medium. The largest number of LAB cells was formed when growing on MRS medium after 3 days of cultivation. In experiments on encapsulating bacterial cells, we used 3-day-old cultures of "Evitalia." The morphological and structural-mechanical characteristics of PGPs and particles loaded with the "Evitalia" LAB cells were studied. The degree of encapsulation of the probiotic LAB in PGPs was studied. More effectively, the LAB cells are encapsulated in PGPs formed from CP. The degree of loading of wet pectic particles from CP was 17.5%, and less for dry pectic particles based on CP (1.96%). Similar indicators for PGPs formed on the basis of AP were 5.6% and 0.33%, respectively. Conclusion: PGPs formed on the basis of AP and CP can serve as a matrix for encapsulating probiotic LAB.

Given that pectin is a well-known substance used for drug delivery, we aimed to obtain and further examine the efficacy of interpolyelectrolyte complexes based on citrus or apple pectin and the Eudragit® EPO for using these carriers in oral drug delivery. To characterize the physicochemical properties of these compounds, turbidity, gravimetry, viscosity, elementary analysis, FTIR spectroscopy, and DSC analysis were utilized. Diffusion transport characteristics were evaluated to assess the swelling ability of the matrices and the release of diclofenac sodium. To examine the release parameters, mathematical modeling was performed by using the Korsmayer–Peppas and Logistic equations as well. During the turbidity study, stoichiometry compositions were selected for the developed IPECs EPO/PecA and EPO/PecC at pH values = 4.0, 5.0, 6.0, and 7.0. The FTIR spectra of the complexes were characterized by an increase in the intensity of the bands at 1610 cm−1 and 1400 cm−1. According to the DSC analysis, IPEC has a certain Tg = 57.3 °C. The highest release rates were obtained for IPEC EPO/PecC_1 and EPO/PecC_4. The mechanism of drug transport from the matrices IPEC EPO/PecC, IPEC EPO/PecA_3, and EPO/PecA_4 can be characterized as Super Case II. Anomalous release (non-Fickian release) is typical for IPEC EPO/PecA_1 and EPO/PecA_2. Thus, the resulting systems can be further used for the effective delivery of the drugs to the colon.

Formation of stable complexes of pectin polysaccharides with Nifedipine hypotensive drug has been shown by IR and UV spectroscopy, stereochemistry of the complexes has been determined, their preparation conditions have been optimized. Features of thermal decomposition of pectin and the prepared complexes with Nifedipine have been studied by TGA/DSC. Obtained results provide scientific foundation to design new water-soluble non-toxic formulation of Nifedipine to expand the use of the drug in medicine. [ABSTRACT FROM AUTHOR]

Zinc oxide (ZnO) can adsorb ionic dyes to generate hybrid pigments. Porous zinc oxide was prepared by combining gelled citrus pectin (80 °C) with zinc nitrate, followed by calcination (600 °C). The product had a high surface area (25 m2 g−1), pore volume (0.049 cc g−1), and pore radius (17 Å), indicative of a macroporous structure. ZnO comprised the wurtzite phase, as characterized by X-ray diffraction. Owing to its textural properties, ZnO effectively removed textile dyes, such as carcinogenic Congo red, from aqueous media. The adsorption of Congo red on the porous ZnO was monitored using UV–vis spectroscopy at aqueous dye concentrations ranging from 100 to 250 mg L−1. Porous ZnO with the adsorbed dye was applied as a hybrid pigment and dispersed in white real estate paint. The resulting colors were evaluated by colorimetry measurements, according to the CIE L*a*b* method. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract The gastrointestinal tract of livestock and poultry is prone to challenge by feedborne antigens, pathogens, and other stress factors in the farm environment. Excessive physiological inflammation and oxidative stress that arises firstly disrupts the intestinal epithelial barrier followed by other components of the gastrointestinal tract. In the present review, the interrelationship between intestinal barrier inflammation and oxidative stress that contributes to the pathogenesis of inflammatory bowel disease was described. Further, the role of naturally existing immunomodulatory nutrients such as the omega-3 polyunsaturated fatty acids, citrus pectin, and milk-derived exosomes in preventing intestinal barrier inflammation was discussed. Based on the existing evidence, the possible molecular mechanism of these bioactive nutrients in the intestinal barrier was outlined for application in animal diets.

Pectin (PEC)/polyvinyl alcohol (PVA), plasticizers, and polyaminopropyl biguanide (Pb) (0.125%–1%) were used to prepare the film solution. The results demonstrated significantly enhanced tensile strength and elongation at break of PEC/PVA/Pb 0.25% film than PEC/PVA film. Scanning electron microscopy was carried out to investigate the continuous and dense structure of the PEC/PVA/ Pb0.25% film. FTIR, XPS, and XRD revealed that Pb addition to the PEC/PVA film matrix changed its physicochemical properties by forming new hydrogen and C N bonds. Moreover, the composite films exhibited strong antimicrobial activity against food-borne microorganisms (E. coli and S. aureus), and post-harvest pathogens (P. italicum and F. proliferatum) in vitro. The composite film effectively inhibited P. italicum growth during citrus experiments, while maintaining nutritional components (vitamin C, total flavonoid, and total polyphenol content). Overall, the antimicrobial composite film presented promising applicability in food packaging. [Display omitted] • Antimicrobial films were fabricated by the solvent casting method • Polyaminopropyl biguanide act as antibacterial agent in PEC/PVA film • The PEC/PVA/Pb film has better tensile strength compared to PEC/PVA film • The PEC/PVA/Pb film can inhibit foodborne microorganisms and post-harvest pathogens • The PEC/PVA/Pb film can be used to maintain the citrus fruit quality [ABSTRACT FROM AUTHOR]

In this study, biodegradable films were formulated in a combination of four different cellulose derivatives (2-hydroxyethyl cellulose with 2 different molecular mass – 720,000 and 1300,000 g/mol, carboxymethyl cellulose, and hydroxypropyl methylcellulose), different concentration of commercial citrus pectin (10 and 20 %), and glycerol. Optical, mechanical, and barrier properties, thermogravimetric parameters, FT-IR analysis, and surface morphology of the films were investigated. The results demonstrated that the addition of 10 % pectin to the formulation of the films increased transparency and tensile strength, while values for oxygen and water vapor permeability decreased. In addition, the uniformization of the blend components was observed by study of surface morphology. Moreover, the characteristic functional groups and interactions between polymers (cellulose derivatives and pectin) and glycerol were highlighted by FT-IR analysis. Films formulated with 10 % of pectin have a great potential to be used for food packaging in which good barrier properties are required. • The barrier and mechanical properties were improved for the films with 10 % pectin. • The characteristic functional groups of film' components were confirmed by FT-IR. • Citrus pectin can be used as a component of biodegradable films. • Resulting films are suitable for food packaging. [ABSTRACT FROM AUTHOR]

Steam explosion (SE) is a potential method to modify pectin structure, which might be connected to its emulsifying characteristics and the bioavailability of encapsulated polymethoxyflavone like nobiletin. However, the relationship between SE-modified pectin and the bioavailability of encapsulated nobiletin is still unclear. In this study, nobiletin-loaded emulsion was fabricated using citrus pectin modified with SE (0.15–0.9 MPa, 3 min) as emulsifier for in vitro digestion study, and the transport and absorption of nobiletin in Caco-2 cells to investigate the bioavailability-promoting effect. The results showed that SE treatment lowered the droplet size of emulsion from 21.38 ± 2.30 μm to 2.14 ± 0.12 μm, enhanced the nobiletin encapsulation efficiency from 23.73 ± 0.78% to 86.27 ± 3.81%, improved the nobiletin bioaccessibility in vitro from 2.48 ± 0.10% to 25.42 ± 0.10% and increased the intracellular accumulation of nobiletin by over 10 times, even higher than that of Tween 80. In conclusion, pectin from SE-treated citrus peel exhibited good emulsion properties and bioavailability-promoting effect in vitro of nobiletin. [Display omitted] • The extraction rate of pectin after steam explosion increased from 9.29 % to 30.65 %. • Pectin treated at 0.3 and 0.45 MPa had good emulsion stability and loading rate. • Pectin showed quick absorption rate with high linearity and GalA but low DM and Mw. • Emulsion stabled by pectin treated at 0.45 MPa had optimal nobiletin bioavailability. [ABSTRACT FROM AUTHOR]

New citrus pectin derivatives carrying pendant N,N-dimethyl-N-alkyl-N-(2-hydroxy propyl) ammonium chloride groups were achieved via polysaccharide derivatization with a mixture of N,N-dimethyl-N-alkyl amine (alkyl = ethyl, butyl, benzyl, octyl, dodecyl) and epichlorohydrin in aqueous solution. The structural characteristics of the polymers were examined via elemental analysis, conductometric titration, Fourier Transform Infrared spectroscopy (FTIR) and 1D (1H and 13C) nuclear magnetic resonance (NMR). Capillary viscosity measurements allowed for the study of viscometric behavior as well as the determination of viscosity–average molar mass for pristine polysaccharide and intrinsic viscosity ([η]) values for pectin and its derivatives. Dynamic light scattering measurements (DLS) showed that pectin-based polymers formed aggregates in aqueous solution with a unimodal distribution. Critical aggregation concentration (cac) for the hydrophobic pectin derivatives were determined using fluorescence spectroscopy. Atom force microscopy (AFM) images allowed for the investigation of the morphology of polymeric populations obtained in aqueous solution, consisting of flocs and aggregates for crude pectin and its hydrophilic derivatives and well-organized aggregates for lipophilic pectin derivatives. Antimicrobial activity, examined using the disc diffusion method, proved that all polymers were active against Staphylococcus aureus bacterium and Candida albicans yeast.

Pectin, a non-starch polysaccharide, is isolated as a byproduct from agro-processing and has numerous applications in the pharmaceutical sector, such as drug delivery, wound healing, and tissue engineering, apart from acting as a gelling, stabiliser, and thickening agent in food product formulations. The present study reviews research on pectin extraction from citrus sources and its industrial applications based on physical, chemical, functional, and rheological properties. The review also discusses studies on pectin modification using various techniques for specific applications.

The eco-friendly polyelectrolyte bilayer films were prepared by layer-by-layer (LBL) casting method using chitosan (CS) and four types of edible citrus pectin as film substrates. The results showed that the polyelectrolyte bilayer films exhibited excellent comprehensive properties. Furthermore, the interaction between CS and pectin was closely related to the degree of methyl-esterification (DM), molecular weight (Mw), and zeta potential of pectin. The low DM, Mw, and high zeta potential of the low methyl-esterified pectin (LM) resulted in a denser internal structure of the bilayer film, stronger UV shielding performance, and stronger gas barrier ability. The high DM and Mw of the high methyl-esterified pectin (HM) endow the bilayer film with stronger mechanical properties, thermal stability, and antifogging property. The microstructural and spectroscopic analysis showed that there are hydrogen bonds and electrostatic interactions between the layers. Overall, the developed CS-pectin polyelectrolyte bilayer films provided potential applications for food bioactive packaging. [ABSTRACT FROM AUTHOR]

Objectives: Fructo-oligosaccharide (FOS) and citrus pectin (CP) are soluble fibers with different chemical composition. However, their fermentation pattern in large intestine remains unclear., Methods: An in vitro batch fermentation using colonic digesta from pigs as inoculum was employed to investigate the fermentation dynamics of FOS and CP. The monosaccharides and SCFAs contents were assayed by high-performance liquid chromatography and gas chromatography, respectively. And the microbiota community was assessed by 16S rRNA gene high-throughput sequencing., Results: Both FOS and CP were degarded after 6 h, especially to a neglected level in FOS. FOS group showed higher abundances of butyrate-producing bacteria such as Eubacterium rectale, Roseburia faecis and Coprococcus comes and butyrate compared to CP. CP stimulated the growth of pectinolytic microbes Lachnospira pectinoschiza, succinate-producing bacteria Succinivibrio dextrinosolvens, succinate-utilizing bacteria Phascolarctobacterium succinatutens and the production of acetate and propionate compared to FOS. Moreover, the relative abundances of key enzymes (e.g. butyrate kinase) involving in butyrate formation via the butyrate kinase route were upregulated in the FOS group. And the key enzymes (e.g. acetyl-CoA synthetase) associated with propionate production through the succinate pathway were upregulated in the CP group., Conclusions: FOS was preferred to ferment by butyrate-producing bacteria to yield a higher level of butyrate via the butyrate kinase pathway, while CP enhanced the cross-feeding of succinate-producing and succinate-utilizing bacteria to form propionate through the succinate pathway. These findings deepen our understanding on the fermentation characteristics of the soluble fibers, and also provide guidelines for fiber choice in precisely modulating the microbial composition and metabolism in large intestine., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Citrus pectin (CP) is a dietary fiber used in animal nutrition with anti-inflammatory properties. CP downregulates chicken immunoregulatory monocytes' functions, like chemotaxis and phagocytosis, in vitro. The molecular underlying background is still unknown. This study investigated the activity of CP on chicken peripheral blood mononuclear cells (PBMC) proteome. An overall number of 1503 proteins were identified and quantified. The supervised sparse variant partial least squares-discriminant analysis (sPLS-DA) for paired data highlighted 373 discriminant proteins between CP-treated and the control group, of which 50 proteins with the highest abundance in CP and 137 in the control group were selected for Gene Ontology (GO) analyses using ProteINSIDE. Discriminant Protein highly abundant in CP-treated cells were involved in actin cytoskeleton organization and negative regulation of cell migration. Interestingly, MARCKSL1, a chemotaxis inhibitor, was upregulated in CP-treated cells. On the contrary, CP incubation downregulated MARCKS, LGALS3, and LGALS8, which are involved in cytoskeleton rearrangements, cell migration, and phagocytosis. In conclusion, these results provide a proteomics background to the anti-inflammatory activity of CP, demonstrating that the in vitro downregulation of phagocytosis and chemotaxis is related to changes in proteins related to the cytoskeleton., Competing Interests: DISCLOSURES None of the authors of this paper has a financial or personal relationship with other people or organizations that could inappropriately influence or bias the paper's content., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Pectin is a potential polysaccharide-based emulsifier, but the stabilized emulsions suffer from insufficient emulsion stability. Therefore, modification is needed to enhance its emulsification performance to cater to practical applications. The genipin-crosslinking strategy was used in this work to modify pectin with different sources and extraction conditions. Chemical composition analysis, molecular weight (Mw), and radius of gyration (Rg) measurement revealed that sugar beet pectin (SBP) has a more compact and flexible conformation than commercial citrus pectin (CP) and apple pectin (AP), indicated by the significantly (p < 0.05) larger Mw/Rg of SBP (18.1–11.3 kg/mol/nm) than CP (8.3 kg/mol/nm) and AP (8.0 kg/mol/nm). Crosslinking modification significantly increased the Mw, radius of gyration, and viscosity. This significantly (p < 0.05) improved the emulsifying stability (a smaller increase in droplets size) by the contribution of both thicker adsorbed hydrated layers at the oil-water interface with a stronger steric-hindrance effect and larger viscosity effect to slow down droplet collision. The formation of a blue-black substance from crosslinking reaction was able to block the UV radiation, which significantly improved the photostability of β-carotene-loaded emulsions. Altogether, genipin-crosslinking is feasible to modify pectin of different sources to enhance the emulsion stability and for use as a vehicle for delivering bioactive compounds. [ABSTRACT FROM AUTHOR]

Enzymes that degrade pectin are called pectinases. Pectinases of microbial origin are used in juice clarification as the process is cost-effective. This study screened a pectinase-producing bacterium isolated from soil and identified as Bacillus subtilis 15A B-92 based on the 16S rRNA molecular technique. The purified pectinase from the isolate showed 99.6 U/mg specific activity and 11.6-fold purity. The molecular weight of the purified bacterial pectinase was 14.41 ± 1 kD. Optimum pectinase activity was found at pH 4.5 and 50 °C, and the enzyme was 100% stable for 3.5 h in these conditions. No enzymatic inhibition or activation effect was seen with Fe2+, Ca2+, or Mg2+. However, a slight inhibition was seen with Cu2+, Mn2+, and Zn2+. Tween 20 and 80 slightly inhibited the pectinase, whereas iodoacetic acid (IAA), ethylenediaminetetraacetate (EDTA), urea, and sodium dodecyl sulfate (SDS) showed potent inhibition. The bacterial pectinase degraded citrus pectin (100%); however, it was inactive in the presence of galactose. With citrus pectin as the substrate, the Km and Vmax were calculated as 1.72 mg/mL and 1609 U/g, respectively. The high affinity of pectinase for its substrate makes the process cost-effective when utilized in food industries. The obtained pectinase was able to clarify orange and apple juices, justifying its application in the food industry. [ABSTRACT FROM AUTHOR]

Pectin recovered via hydrodynamic cavitation (IntegroPectin) from lemon and grapefruit agri-food waste intrinsically containing antimicrobial bioactive substances (flavonoids, phenolic acids, terpenes, and terpenoids) was used to generate innovative and eco-compatible films that efficiently inhibit the growth of Gram-negative pathogens. Extensive characterization of films confirmed the presence of these substances, which differently interact with the polysaccharide polymer (pectin), plasticizer (glycerol), surfactant (Tween 60), and cross-linker (Ca2+), conferring to these films a unique structure. Besides, IntegroPectin-based films constitute versatile systems for the sustained, controlled, and slow-release (up to 72 h) of bioactive substances in an aqueous environment. This feature is crucial for the good in vitro antimicrobial activity exerted by IntegroPectin films against three Gram-negative bacteria (two indicator pathogen strains Pseudomonas aeruginosa ATCC 10145, P. aeruginosa PAO1, and the clinical isolate Klebsiella pneumoniae) that are involved in the global emergence of the antimicrobial resistance. [ABSTRACT FROM AUTHOR]

Citrus peel wastes, one of the major by-products of the agri-food industry, are a source of value-added compounds. In this work, a commercial pectin (PEC1) and one obtained by direct extraction from citrus fibre (PEC2), were hydrolysed and ultrafiltered at different cut-off (100, 50 and 30 kDa) and then tested in broth with four different probiotic strains: Lacticaseibacillus paracasei, Limosilactobacillus fermentum, Lacticaseibacillus rhamnosus and Bifidobacterium animalis subsp. paracasei. In addition, the probiotic strains selected for their growth rate with the fractions of the two pectins were tested for tolerance to different pH values and bile salts. This study demonstrated that POS2 (product from the enzymatic hydrolysis by PEC2) showed greater prebiotic activity than POS1 (product from the enzymatic hydrolysis by PEC1). The results confirmed that citrus pectic oligosaccharides could be used as emerging prebiotics with improved properties due to their antimicrobial and modulating-microbiota ability. [ABSTRACT FROM AUTHOR]

Film formulations based on pectin and polyvinyl alcohol with moxifloxacin were developed. The moxifloxacin release from films with different polyvinyl alcohol content was studied. Changes in the composition of polymer complexes influence the size of supramolecular formations in composite films and ultimately the moxifloxacin release kinetics. The complexation of polymers with moxifloxacin was studied by electronic spectroscopy. Microbiological tests demonstrated the pharmacological activity of films based on pectin and polyvinyl alcohol with moxifloxacin. [ABSTRACT FROM AUTHOR]

In this study, citrus pectin (CP) and soybean protein isolate (SPI) were used as raw materials to prepare a complex. The interaction mechanism and structural changes between SPI and CP were deeply studied by fluorescence spectroscopy and Fourier infrared spectroscopy. The results show that CP has a strong quenching effect on SPI's endogenous fluorescence, and with the addition of CP, the endogenous fluorescence intensity of SPI decreased from 13,565.2 to 6067.3. The CP quenching of SPI is static quenching, and the number of combined bits is 1.26. The results of three‐dimensional fluorescence spectra showed that the addition of CP reduced the polarity of SPI amino acid residue microenvironment and changed the protein structure. Hydrophobic interaction exists between CP and SPI. The results of three‐dimensional fluorescence spectra showed that the addition of CP reduced the polarity of the amino acid residue microenvironment of SPI and changed the protein structure. Fourier transform infrared spectroscopy shows that CP could change the secondary structure of SPI by decreasing the α‐helix and β‐sheet, increasing β‐rotation and irregular curl, destroying the ordered structure of SPI and increasing the polarity of the amino acids exposed to the solution. The microstructure analysis shows that SPI–CP composite system has honeycomb structure and dense pores. From the perspective of reaction thermodynamics, it was found that the addition of CP could improve the thermal stability of SPI and increase the denaturation temperature of SPI from 119.73 to 132.97°C. This study can provide a theoretical basis for the preparation of protein–pectin complexes and provides reference for their application in food grade gels and Pickering emulsions. [ABSTRACT FROM AUTHOR]

The starch foam displays weak barrier properties under humid storage, which limits its applications in the food industry. In this study, citrus pectin was loaded to strengthen the starch foam. Results showed that the pectin (4 wt% ∼ 8 wt%) effectively modified the cell structures of the starch foam block. This was attributed to the increased viscosity of the starch melt during foaming and the enhanced cell stability during cooling, which was promoted by the formation of entanglements, hydrogen bonds, and ester bonds between pectin and starch, as confirmed by FTIR and DSC. Moreover, the pectin-starch foam displayed improved mechanical properties under wet storage conditions, mainly due to the limited moisture adsorption and water migration. The foam containing 4 wt% of pectin exhibited the highest compression-recovery ratio (76.7 %) and a reduced adsorbed moisture content (19.22 %) under 95 % RH. Overall, citrus pectin could improve the starch foaming process and the foam blocks barrier properties. • Citrus pectin effectively modified the starch foaming process. • Hydrogen and ester bonds in the foam matrix were strengthened with pectin. • Compression and moisture barrier properties of the starch foam were improved. [ABSTRACT FROM AUTHOR]

Treatment with a magnetic induced electric field (MIEF) under acidic conditions has proven to be an effective method for modifying pectin, enhancing its functional attributes. In this study, the effects of varying excitation voltages of MIEF under acidic conditions on the physicochemical, structural, and functional properties of citrus pectin (CP) were explored. The results demonstrated that compared to CP without MIEF treatment, MIEF-treated CP exhibited enhanced thermal stability, rheological behavior, emulsifying and gel-forming abilities, and antioxidant capacity. These improvements were attributed to higher degrees of esterification, reduced molecular weights, and increased levels of galacturonic acid and homogalacturonan in the structural backbone of the treated CP. Additionally, MIEF treatment under acidic conditions altered the surface morphology and crystalline structure of CP. Therefore, our findings suggest that applying moderate excitation voltages (150–200 V) during MIEF treatment can enhance the functional properties of CP, leading to the production of high-quality modified pectin. [Display omitted] • MIEF treatment under an acidic condition was used to modify citrus pectin (CP). • MIEF-assisted acid treatment CPs had higher GalA content and DE value, and lower M w. • MIEF-assisted acid treatment improved functional properties of CP. • Increasing excitation voltage resulted in the enhancement of the hydrolysis of CP. [ABSTRACT FROM AUTHOR]

Gelation is a critical property of citrus pectin. However, the roles played by neutral sugar side-chains on acid-induced pectin gelation remain poorly understood. Herein, galactan- or/and arabinan-eliminated pectins (P-G, P-A, and P-AG) were used to investigate the effects of side-chains on gelation. The gel hardness values of citrus pectin, P-G, P-A, and P-AG were 42.6, 39.9, 5.3, and 2.1 g, respectively, suggesting that arabinan contributed more to gelation than galactan. We next found that arabinan branches promoted pectin chain entanglement more effectively than arabinan backbones. Destabilizer addition experiments showed that hydrogen bonding, electrostatic interaction, and hydrophobic interaction were the main forces affecting pectin gel networks and strength, which was further validated by molecular dynamic simulations. The total number of hydrogen bonds between the arabinan branches and galactan/HG (65.7) was significantly higher than that between the arabinan backbones and galactan/HG (39.1), indicating that arabinan branches predominated in terms of such interactions. This study thus elucidated the roles played by neutral-sugar side-chains, especially the arabinan branches of acid-induced pectin gels, in term of enhancing high-methoxyl pectin gelation, and offers novel insights into the structure-gelling relationships of citrus pectin. Arabinan branches greatly facilitate pectin aggregation by forming H-bonds and engaging in electrostatic and van der Waals interactions with HG and galactan, thus enhancing 3D network structure and gel strength. [Display omitted] [ABSTRACT FROM AUTHOR]

Colloidal matrices of native and oxidized pectin were developed to improve iron bioavailability through the digestive tract. Ferrous bisglycinate (Gly-Fe), obtained by precipitation of glycine chelation to Fe2+, was mixed with native and peroxide-oxidized citrus pectin, and subsequently lyophilized. Controls included matrices with iron and glycine without chelation. The resulting samples were characterized through FTIR, SEM, and TGA/DSC before and after in vitro digestion, which was performed in simulated salivary, gastric, and intestinal fluids. During these digestions, swelling capacity and iron release were assessed. All matrix formulations were porous, and while pectin oxidation did not alter architecture, it changed their properties, increasing thermal stability, likely due to greater number of interaction possibilities through carbonyl groups generated during oxidation. This also resulted in lower swelling capacity, with greater stability observed when using the chelated complex. Higher swelling was found in gastric and intestinal fluids. Pectin oxidation also increased retention of the chelated form, contrary to what was observed with unchelated iron. Thus, there is an important effect of pectin oxidation combined with iron in the form of ferrous biglyscinate on matrix stability and iron release through the digestive tract. These matrices could potentially improve iron bioavailability, diminishing organoleptic changes in fortified iron foods.

The gastrointestinal tract of livestock and poultry is prone to challenge by feedborne antigens, pathogens, and other stress factors in the farm environment. Excessive physiological inflammation and oxidative stress that arises firstly disrupts the intestinal epithelial barrier followed by other components of the gastrointestinal tract. In the present review, the interrelationship between intestinal barrier inflammation and oxidative stress that contributes to the pathogenesis of inflammatory bowel disease was described. Further, the role of naturally existing immunomodulatory nutrients such as the omega-3 polyunsaturated fatty acids, citrus pectin, and milk-derived exosomes in preventing intestinal barrier inflammation was discussed. Based on the existing evidence, the possible molecular mechanism of these bioactive nutrients in the intestinal barrier was outlined for application in animal diets. [ABSTRACT FROM AUTHOR]

Our previous study showed that pectin de-esterified by high hydrostatic pressure assisted enzymatic method (HHP-pectin) had better Ca2+-induced gel performance and more stable emulsion than those from conventional enzymatic and alkaline methods. In this study, Ca2+-induced emulsion gels were further prepared by HHP-pectin in the presence of erythritol, and their texture properties, moisture distribution, the release of free fatty acids (FFAs) and curcumin were investigated. Results showed that gel strength, gel elasticity, and water cut-off capacity of the prepared emulsion gels significantly increased with Ca2+ concentration increasing. Compared with emulsions, HHP-pectin emulsion gels can significantly decrease FFAs and curcumin release in vitro digestion, especially for samples with better texture properties (higher Ca2+ concentration). This study indicated that Ca2+-induced HHP-pectin emulsion gels prepared with erythritol may provide a new choice for low-calorie foods preparing, and may become a potential alternative model that inhibiting FFAs release and helping fat-soluble nutrients (curcumin) deliver. [Display omitted] • Emulsion gels were prepared by LMP, oil, and erythritol via Ca2+-induced. • Ca2+ highly affected the texture and water distribution of emulsion gels. • The emulsion gels slowed free fatty acid release in the small intestine. • Gel structure and lipid digestion affected curcumin release in the small intestine. • The prepared emulsion gels maybe a new way to deliver fat-soluble nutrients to colon. [ABSTRACT FROM AUTHOR]

Pectinases are widely used in a variety of industrial processes. However, their application is limited by low catalytic processivity, reduced stability, high cost, and poor re-use compatibility. These drawbacks may be overcome by enzyme immobilization with ferromagnetic nanoparticles, which are easily recovered by a magnetic field. In this work, an endopolygalacturonase from Chondrostereum purpureum (EndoPGCp) expressed in Pichia pastoris was immobilized on glutaraldehyde-activated chitosan ferromagnetic nanoparticles (EndoPGCp-MNP) and used to supplement a commercial enzyme cocktail. No significant differences in biochemical and kinetic properties were observed between EndoPGCp-MNP and EndoPGCp, although the EndoPGCp-MNP showed slightly increased thermostability. Cocktail supplementation with EndoPGCp-MNP increased reducing sugar release from orange wastes by 1.8-fold and showed a synergistic effect as compared to the free enzyme. Furthermore, EndoPGCp-MNP retained 65% of the initial activity after 7 cycles of re-use. These properties suggest that EndoPGCp-MNP may find applications in the processing of pectin-rich agroindustrial residues. [ABSTRACT FROM AUTHOR]

In order to better utilize the citrus pectin (CP) resource, the crude citrus pectin (CCP), obtained from the citrus fruit canning processing waste water, was purified by cellulose DEAE-52 column, providing neutral polysaccharide CP0 and two acidic polysaccharides (CP1 and CP3). CP1 had the highest yield among the three fractions, being 44.29%. The chemical composition, structure and morphology of these pectin components were analyzed. Monosaccharide composition analysis revealed that arabinose was the most abundant composition in these pectin samples. CCP, CP1 and CP3 were mainly composed of rhamnogalacturonan-I (RG-I) regions. Compared with CP3, CCP and CP1 had longer side chains, which are mainly consisted of arabinose. FT-IR and NMR analysis indicated that α-type glycosidic bonds are the main linkage in the four pectin components. These CP samples were found to possess different conformation, but no triple-helical conformation was observed in all these CP fractions. Scanning electron microscopy revealed that CCP, CP1 and CP3 all had irregular sheet-like structures and partly porous structures. The four pectin components showed the characteristics of non-Newtonian fluids and possessed good viscoelasticity. Due to these properties, the pectin might have potential application in food industry as food thickening agent. • Three fractions of pectin derived from citrus canning processing water were isolated. • Chemical components of pectin fractions were determined, and RG-I was their dominated structure. • These pectin fractions behaved as non-Newtonian fluids and possessed good viscoelasticity. [ABSTRACT FROM AUTHOR]

A new type of film packaging made from natural polysaccharide materials, with its environmental safety and friendliness, is considered as a potential substitute for plastics. Novel polysaccharide composite films based upon citrus pectin (CP) and sodium alginate (SA) were successfully prepared and characterized, containing pterostilbene (PTE) at various concentrations (0.2, 0.4, 0.8, 1.6, 3.2 mM). The rheological analysis displayed that all film-forming liquids performed no gelation behavior with G" > G' at low frequency and weak gelation with G" < G' at high frequency. The SA-CP films had good tensile strength (TS) and elongation at break (EB), while adding PTE as an antioxidant to the film reduced both the values. Of note, the SA-CP films with PTE had better moisture resistance than that of the pure SA-CP films, which was related to the changes of its microstructure. The increased roughness of the films containing PTE was observed by microscope. After calcium chloride cross-linking, the water solubility of the films was reduced, while its thermal stability was improved. Notably, the accretion of PTE expressively enhanced the antioxidant properties of the SA-CP films. Thus, the SA-CP composite films containing PTE could be utilized as an excellent antioxidant packaging material. [ABSTRACT FROM AUTHOR]

The eco-friendly polyelectrolyte bilayer films were prepared by layer-by-layer (LBL) casting method using chitosan (CS) and four types of edible citrus pectin as film substrates. The results showed that the polyelectrolyte bilayer films exhibited excellent comprehensive properties. Furthermore, the interaction between CS and pectin was closely related to the degree of methyl-esterification (DM), molecular weight (Mw), and zeta potential of pectin. The low DM, Mw, and high zeta potential of the low methyl-esterified pectin (LM) resulted in a denser internal structure of the bilayer film, stronger UV shielding performance, and stronger gas barrier ability. The high DM and Mw of the high methyl-esterified pectin (HM) endow the bilayer film with stronger mechanical properties, thermal stability, and antifogging property. The microstructural and spectroscopic analysis showed that there are hydrogen bonds and electrostatic interactions between the layers. Overall, the developed CS-pectin polyelectrolyte bilayer films provided potential applications for food bioactive packaging.

Purpose: Menopause disturbs energy, glucose, and lipid metabolisms and changes the composition of the gut microbiota, but dietary fibers without phytoestrogens may ameliorate menopausal metabolic disorders. The objective of the present study was to assess whether consuming the prebiotics chitosan and citrus pectin can improve postmenopausal symptoms, possibly by modulating the gut microbiota in ovariectomized (OVX) rats, and the mechanism of action was examined. Methods: The OVX rats were given 4.5% cellulose (OVX-Control), chitosan (OVX-Chitosan), or citrus pectin (OVX-Pectin) in a 43% fat diet and the sham rats were given the same diet as the OVX-Control for 12 weeks. Sham-operated rats had the same diet as OVX-Control (Normal-Control). Body-weight, visceral fat mass, tail skin temperature, serum 17β-estradiol, glucose intolerance, and insulin tolerance were determined. Gut microbiota in the fecal samples was measured by NGS and analyzed with PICRUSt2. Short-chain fatty acids (SCFA) and metabolomic characteristics of serum were also measured with UPLC-mass spectrometry. Results: Chitosan and citrus pectin were selected because the incubation of rat feces with these two prebiotics in vitro had shown increased butyrate production. OVX-Chitosan reduced the weight, visceral fat content, and tail skin temperature, and OVX-Chitosan and OVX-Pectin improved glucose tolerance, compared to the OVX-Control. Both alleviated dyslipidemia, compared to the OVX-Control. OVX-Chitosan and OVX-Pectin elevated serum propionate and butyrate concentrations but only OVX-Chitosan lowered serum acetate concentrations. In PICRUSt2, chitosan upregulated the functional genes of gut microbiota involved in valine, leucine, and isoleucine biosynthesis, whereas the OVX-Control exhibited significantly upregulated lipopolysaccharide biosynthesis. OVX-Pectin exhibited increased α-diversity in the fecal bacteria. Metabolomic analysis revealed higher serum urate concentrations in the OVX-Control group than the other groups, and serum arginine and leucine concentrations were higher in the OVX-Chitosan group (P < 0.05). Conclusion: Chitosan and citrus pectin consumptions improved menopausal symptoms by improving the diversity and composition of the gut microbiota, and serum metabolites and SCFA originating from fecal bacteria. Chitosan was more effective for improving menopausal symptoms than citrus pectin. [ABSTRACT FROM AUTHOR]

The biological potency of pectin is intricately intertwined with its intricate molecular architecture. The fine structure of pectin is influenced by the extraction method, while the specific impact of these methods on the fine structure and the affected attributes thereof remains enigmatic. This study delves into the profound analysis of eight distinct extraction methods influence on the structure and biological activity of citrus peel pectin. The findings demonstrate that citric acid ultrasound-assisted microwave extraction yields pectin (Pectin CA-US/MV) with higher viscosity and a dense, rigid chain. Pectin extracted with acetic acid ultrasound (Pectin AA-US) and citric acid ultrasound (Pectin CA-US) exhibits elevated galacturonic acid (GalA) levels and reduced D-galactose (Gal) content, enhancing antioxidant activity. Eight pectin-chitosan (CS) hydrogels, especially Pectin CA-US/MV -CS, demonstrate commendable thermal stability, rheological properties, self-healing capability, and swelling behavior. This study characterizes citrus peel pectin properties from different extraction methods, laying a foundation for its application in food, pharmaceuticals, and industry. [Display omitted] [ABSTRACT FROM AUTHOR]

The low water solubility of zein severely limits its industrial application. In this study, the emulsifying performance and stability of zein were improved by electrostatically compounding different ratios of citrus pectin (CP) with zein to obtain zein-CP composite particles (ZCPs). When the mass ratio of CP to zein was 1: 2 (C1Z2), the composite particles showed the smallest particle size, and the C1Z2 stabilized Pickering emulsion (C1Z2-PE) exhibited excellent physical and environmental stability. The ZCPs stabilized emulsions were further cross-linked by transglutaminase (TGase) and Ca2+, resulting in the formation of emulsion gels with increased mechanical properties. Macroscopic and microscopic morphology analysis demonstrated the successful preparation of the emulsion gels. Through the rheological study and texture analysis, it was observed that the double cross-linked emulsion gels exhibited a remarkable improvement in apparent viscosity and gel hardness. This research offers a new strategy and technical reference for the development of new gel-based products. [Display omitted] • Zein-citrus pectin composite particles (ZCPs) were prepared via electrostatic interactions. • Citrus pectin modified zein surface wettability and considerably enhanced emulsification. • The environmental stability of ZCPs stabilized emulsion (ZCP-PE) was significantly improved. • ZCP-PE was further crosslinked by transglutaminase (TGase) and Ca2+ to form emulsion gels. • TGase and Ca2+ synergistically improved mechanical properties of emulsion gels. [ABSTRACT FROM AUTHOR]

[Display omitted] • WRPs could prevent the dysbiosis of gut microbiota in burn injury by reducing the expansion of inflammation-promoting bacteria. • WRPs suppressed ileum GLP-1 production at 1d (P = 0.002) and plasma GLP-1 levels at 3d in burn-injured mice (P = 0.013). • Intestinal T cell number was increased by both WRPs in jejunum and by WRP-B in ileum at 3d postburn. • The reprogramming of splenic T cell metabolism in burn injury was partly abolished by both WRPs at 1d postburn. Water-soluble rhamnogalacturonan-I enriched citrus pectin (WRP) has promising effect on antimicrobial defense. We aim to determine whether the modified acidic (A) or neutral (B) WRP solutions can improve intestinal microbial dysbiosis in burn-injured mice. Male Balb/c mice were gavaged with WRPs at 80, 160, 320 mg/kg. Body weight daily for 21 days before exposed to thermal injury of 15 % total body surface area and mortality was monitored. Mice with 80 mg/kg WRPs were also subjected to fecal DNAs and T cell metabonomics analysis, intestinal and plasma glucagon-like peptide 1 (GLP-1) detection, plasma defensin, immunoglobin and intestinal barrier examinations at 1 and 3d postburn (p.b.). Burn-induced mortality was only improved by low dose WRP-A (P = 0.039). Both WRPs could prevent the dysbiosis of gut microbiota in burn injury by reducing the expansion of inflammation-promoting bacteria. Both WRPs suppressed ileum GLP-1 production at 1d p.b. (P = 0.002) and plasma GLP-1 levels at 3d p.b. (P = 0.013). Plasma GLP-1 level correlated closely with ileum GLP-1 production (P = 0.019) but negatively with microbiota diversity at 1d p.b. (P = 0.003). Intestinal T cell number was increased by both WRPs in jejunum at 3d p.b. However, the exaggerated splenic T cell metabolism in burn injury was reversed by both WRPs at 1d p.b. The burn-increased plasma defensin β1 level was only reduced by WRP-B. Similarly, the intestinal barrier permeability was only rescued by WRP-B at 1d p.b. WRP-A rather than WRP-B could reduce burn-induced mortality in mice by suppressing intestinal GLP-1 secretion, restoring gut microbiota dysbiosis and improving adaptive immune response. [ABSTRACT FROM AUTHOR]