Search

Recent advances in semiconductor spin qubits have achieved linear arrays exceeding ten qubits. Moving to two-dimensional (2D) qubit arrays is a critical next step to advance towards fault-tolerant implementations, but it poses substantial fabrication challenges, particularly because enabling control of nearest-neighbor entanglement requires the incorporation of interstitial exchange gates between quantum dots in the qubit architecture. In this work, we present a 2D array of silicon metal-oxide-semiconductor (MOS) quantum dots with tunable interdot coupling between all adjacent dots. The device is characterized at 4.2 K, where we demonstrate the formation and isolation of double-dot and triple-dot configurations. We show control of all nearest-neighbor tunnel couplings spanning up to 30 decades per volt through the interstitial exchange gates and use advanced modeling tools to estimate the exchange interactions that could be realized among qubits in this architecture. These results represent a significant step towards the development of 2D MOS quantum processors compatible with foundry manufacturing techniques., Comment: 9 pages, 5 figures

Fabrication of quantum processors in advanced 300 mm wafer-scale complementary metal-oxide-semiconductor (CMOS) foundries provides a unique scaling pathway towards commercially viable quantum computing with potentially millions of qubits on a single chip. Here, we show precise qubit operation of a silicon two-qubit device made in a 300 mm semiconductor processing line. The key metrics including single- and two-qubit control fidelities exceed 99% and state preparation and measurement fidelity exceeds 99.9%, as evidenced by gate set tomography (GST). We report coherence and lifetimes up to $T_\mathrm{2}^{\mathrm{*}} = 30.4$ $\mu$s, $T_\mathrm{2}^{\mathrm{Hahn}} = 803$ $\mu$s, and $T_1 = 6.3$ s. Crucially, the dominant operational errors originate from residual nuclear spin carrying isotopes, solvable with further isotopic purification, rather than charge noise arising from the dielectric environment. Our results answer the longstanding question whether the favourable properties including high-fidelity operation and long coherence times can be preserved when transitioning from a tailored academic to an industrial semiconductor fabrication technology., Comment: 10 pages, 4 figures, 4 extended data figures

Silicon quantum computing has the potential to revolutionize technology with capabilities to solve real-life problems that are computationally complex or even intractable for modern computers [1] by offering sufficient high quality qubits to perform complex error-corrected calculations. Silicon metal-oxide-semiconductor based quantum dots present a promising pathway for realizing practical quantum computers. To improve certain qubit properties, it is a common strategy to incorporate multiple electrons in the same dot in order to form qubits in higher confined orbital states. Theoretical modelling is an essential part of understanding the quantum behaviour of these electrons, providing a basis for validating the physical working of device models as well as providing insights into experimental data. Hartree-Fock theory is an imperative tool for the electronic structure modelling of multi-electron quantum dots due to its ability to simulate a large number of electrons with manageable computation load. However, an efficient calculation of the self-consistent field becomes hard because dot formations in silicon are characterized by strong electron-electron interactions and conduction band valleys, besides the relatively high comparative effective mass, which add to create a behaviour dominated by repulsion between electrons rather than a well established shell structure. In this paper, we present a Hartree-Fock-based method that accounts for these complexities for the modelling of silicon quantum dots. With this method, we first establish the significance of including electron-electron interactions and valley degree of freedom and their implications. We then explore a simple case of anisotropic dots and observe the impact of anisotropy on dot formations.

Quantum processors based on integrated nanoscale silicon spin qubits are a promising platform for highly scalable quantum computation. Current CMOS spin qubit processors consist of dense gate arrays to define the quantum dots, making them susceptible to crosstalk from capacitive coupling between a dot and its neighbouring gates. Small but sizeable spin-orbit interactions can transfer this electrostatic crosstalk to the spin g-factors, creating a dependence of the Larmor frequency on the electric field created by gate electrodes positioned even tens of nanometers apart. By studying the Stark shift from tens of spin qubits measured in nine different CMOS devices, we developed a theoretical frawework that explains how electric fields couple to the spin of the electrons in increasingly complex arrays, including those electric fluctuations that limit qubit dephasing times $T_2^*$. The results will aid in the design of robust strategies to scale CMOS quantum technology., Comment: 9 pages, 4 figures

The encoding of qubits in semiconductor spin carriers has been recognised as a promising approach to a commercial quantum computer that can be lithographically produced and integrated at scale. However, the operation of the large number of qubits required for advantageous quantum applications will produce a thermal load exceeding the available cooling power of cryostats at millikelvin temperatures. As the scale-up accelerates, it becomes imperative to establish fault-tolerant operation above 1 kelvin, where the cooling power is orders of magnitude higher. Here, we tune up and operate spin qubits in silicon above 1 kelvin, with fidelities in the range required for fault-tolerant operation at such temperatures. We design an algorithmic initialisation protocol to prepare a pure two-qubit state even when the thermal energy is substantially above the qubit energies, and incorporate radio-frequency readout to achieve fidelities up to 99.34 per cent for both readout and initialisation. Importantly, we demonstrate a single-qubit Clifford gate fidelity of 99.85 per cent, and a two-qubit gate fidelity of 98.92 per cent. These advances overcome the fundamental limitation that the thermal energy must be well below the qubit energies for high-fidelity operation to be possible, surmounting a major obstacle in the pathway to scalable and fault-tolerant quantum computation.

The boom of semiconductor quantum computing platforms created a demand for computer-aided design and fabrication of quantum devices. Path integral Monte Carlo (PIMC) can have an important role in this effort because it intrinsically integrates strong quantum correlations that often appear in these multi-electron systems. In this paper we present a PIMC algorithm that estimates exchange interactions of three-dimensional electrically defined quantum dots. We apply this model to silicon metal-oxide-semiconductor (MOS) devices and we benchmark our method against well-tested full configuration interaction (FCI) simulations. As an application, we study the impact of a single charge trap on two exchanging dots, opening the possibility of using this code to test the tolerance to disorder of CMOS devices. This algorithm provides an accurate description of this system, setting up an initial step to integrate PIMC algorithms into development of semiconductor quantum computers., Comment: 10 pages , 5 figures

Spins of electrons in CMOS quantum dots combine exquisite quantum properties and scalable fabrication. In the age of quantum technology, however, the metrics that crowned Si/SiO2 as the microelectronics standard need to be reassessed with respect to their impact upon qubit performance. We chart the spin qubit variability due to the unavoidable atomic-scale roughness of the Si/SiO$_2$ interface, compiling experiments in 12 devices, and developing theoretical tools to analyse these results. Atomistic tight binding and path integral Monte Carlo methods are adapted for describing fluctuations in devices with millions of atoms by directly analysing their wavefunctions and electron paths instead of their energy spectra. We correlate the effect of roughness with the variability in qubit position, deformation, valley splitting, valley phase, spin-orbit coupling and exchange coupling. These variabilities are found to be bounded and lie within the tolerances for scalable architectures for quantum computing as long as robust control methods are incorporated., Comment: 20 pages, 8 figures

Achieving high-fidelity entangling operations between qubits consistently is essential for the performance of multi-qubit systems and is a crucial factor in achieving fault-tolerant quantum processors. Solid-state platforms are particularly exposed to errors due to materials-induced variability between qubits, which leads to performance inconsistencies. Here we study the errors in a spin qubit processor, tying them to their physical origins. We leverage this knowledge to demonstrate consistent and repeatable operation with above 99% fidelity of two-qubit gates in the technologically important silicon metal-oxide-semiconductor (SiMOS) quantum dot platform. We undertake a detailed study of these operations by analysing the physical errors and fidelities in multiple devices through numerous trials and extended periods to ensure that we capture the variation and the most common error types. Physical error sources include the slow nuclear and electrical noise on single qubits and contextual noise. The identification of the noise sources can be used to maintain performance within tolerance as well as inform future device fabrication. Furthermore, we investigate the impact of qubit design, feedback systems, and robust gates on implementing scalable, high-fidelity control strategies. These results are achieved by using three different characterization methods, we measure entangling gate fidelities ranging from 96.8% to 99.8%. Our analysis tools identify the causes of qubit degradation and offer ways understand their physical mechanisms. These results highlight both the capabilities and challenges for the scaling up of silicon spin-based qubits into full-scale quantum processors.

One of the key pathways towards scalability of spin-based quantum computing systems lies in achieving long-range interactions between electrons and increasing their inter-connectivity. Coherent spin transport is one of the most promising strategies to achieve this architectural advantage. Experimental results have previously demonstrated high fidelity transportation of spin qubits between two quantum dots in silicon and identified possible sources of error. In this theoretical study, we investigate these errors and analyze the impact of tunnel coupling, magnetic field and spin-orbit effects on the spin transfer process. The interplay between these effects gives rise to double dot configurations that include regimes of enhanced decoherence that should be avoided for quantum information processing. These conclusions permit us to extrapolate previous experimental conclusions and rationalize the future design of large scale quantum processors., Comment: 18 pages, 9 figures

Once called a "classically non-describable two-valuedness" by Pauli , the electron spin is a natural resource for long-lived quantum information since it is mostly impervious to electric fluctuations and can be replicated in large arrays using silicon quantum dots, which offer high-fidelity control. Paradoxically, one of the most convenient control strategies is the integration of nanoscale magnets to artificially enhance the coupling between spins and electric field, which in turn hampers the spin's noise immunity and adds architectural complexity. Here we demonstrate a technique that enables a \emph{switchable} interaction between spins and orbital motion of electrons in silicon quantum dots, without the presence of a micromagnet. The naturally weak effects of the relativistic spin-orbit interaction in silicon are enhanced by more than three orders of magnitude by controlling the energy quantisation of electrons in the nanostructure, enhancing the orbital motion. Fast electrical control is demonstrated in multiple devices and electronic configurations, highlighting the utility of the technique. Using the electrical drive we achieve coherence time $T_{2,{\rm Hahn}}\approx50 \mu$s, fast single-qubit gates with ${T_{\pi/2}=3}$ ns and gate fidelities of 99.93 % probed by randomised benchmarking. The higher gate speeds and better compatibility with CMOS manufacturing enabled by on-demand electric control improve the prospects for realising scalable silicon quantum processors.

Majorana zero modes (MZMs) emerging at the edges of topological superconducting wires have been proposed as the building blocks of novel, fault-tolerant quantum computation protocols. Coherent detection and manipulation of such states in scalable devices are, therefore, essential in these applications. Recent detection proposals include semiconductor quantum dots (QDs) coupled to the end of these wires, as changes in the QD electronic spectral density due to the MZM coupling could be detected in transport experiments. Here, we propose that multi-QD systems can also be used to manipulate MZMs through precise control over the QDs' parameters. The simplest case where Majorana manipulation is possible is in a double quantum dot (DQD) geometry. By using exact analytical methods and numerical renormalization-group calculations, we show that the QDs' spectral functions can be used to characterize the presence or not of MZMs "leaking" into the DQD. More importantly, we find that these signatures respond to changes in the DQD parameters such as gate-voltages and couplings in a consistent fashion. Additionally, we show that different MZM-DQD coupling geometries ("symmetric" , "in-series" and "T-shaped" junctions) offer distinct ways in which MZMs can be switched from dot to dot. These results highlight the interesting possibilities that DQDs offer for all-electrical MZM control in scalable devices., Comment: Published version. 14 pages, 11 figures