Search

ABSTRACT: Brown fermented milk (BFM) is favored by consumers in the dairy market for its unique burnt flavor and brown color. However, Maillard reaction products (MRP) from high-temperature baking are also noteworthy. In this study, tea polyphenols (TP) were initially developed as potential inhibitors of MRP formation in BFM. The results showed that the flavor profile of BFM did not change after adding 0.08% (wt/wt) of TP, and its inhibition rates on 5-hydroxymethyl-2-furaldehyde (5-HMF), glyoxal (GO), methylglyoxal (MGO), Nε-carboxymethyl lysine (CML), and Nε-carboxyethyl lysine (CEL) were 60.8%, 27.12%, 23.44%, 57.7%, and 31.28%, respectively. After 21 d of storage, the levels of 5-HMF, GO, MGO, CML, and CEL in BFM with TP were 46.3%, 9.7%, 20.6%, 5.2%, and 24.7% lower than the control group, respectively. Moreover, a smaller change occurred in their color and the browning index was lower than that of the control group. The significance of this study was to develop TP as additives to inhibit the production of MRP in brown fermented yogurt without changing color and flavors, thereby making dairy products safer for consumers.

Staphylococcus aureus is the main culprit, causing a variety of severe clinical infections. At the same time, clinics are also facing the severe situation of antibiotic resistance. Therefore, effective strategies to address this problem may include expanding the antimicrobial spectrum by exploring alternative sources of drugs or delaying the development of antibiotic resistance through combination therapy so that existing antibiotics can continue to be used. Plumbagin (PLU) is a phytochemical that exhibits antibacterial activity. In the present study, we investigated the in vitro antibacterial activity of PLU. We selected five antibiotics with different mechanisms and inhibitory activities against S. aureus to explore their interaction with the combination of PLU. The interaction of combinations was evaluated by the Bliss independent model and visualized through response surface analysis. PLU exhibited potent antibacterial activity, with half maximal inhibitory concentration (IC50) and minimum inhibitory concentration (MIC) values against S. aureus of 1.73 μg/mL and 4 μg/mL, respectively. Synergism was observed when PLU was combined with nitrofurantoin (NIT), ciprofloxacin (CPR), mecillinam (MEC), and chloramphenicol (CHL). The indifference of the trimethoprim (TMP)-PLU pairing was demonstrated across the entire dose-response matrix, but significant synergy was observed within a specific dose region. In addition, no antagonistic interactions were indicated. Overall, PLU is not only a promising antimicrobial agent but also has the potential to enhance the growth-inhibitory activity of some antibiotics against S. aureus, and the use of the interaction landscape, along with the dose-response matrix, for analyzing and quantifying combination results represents an improved approach to comprehending antibacterial combinations.

Over the course of long-term evolution, cells have developed intricate defense mechanisms in response to DNA damage; these mechanisms play a pivotal role in maintaining genomic stability. Defects in the DNA damage response pathways can give rise to various diseases, including cancer. The DNA damage response (DDR) system is instrumental in safeguarding genomic stability. The accumulation of DNA damage and the weakening of DDR function both promote the initiation and progression of tumors. Simultaneously, they offer opportunities and targets for cancer therapeutics. This article primarily elucidates the DNA damage repair pathways and the progress made in targeting key proteins within these pathways for cancer treatment. Among them, poly (ADP-ribose) polymerase 1 (PARP1) plays a crucial role in DDR, and inhibitors targeting PARP1 have garnered extensive attention in anticancer research. By delving into the realms of DNA damage and repair, we aspire to explore more precise and effective strategies for cancer therapy and to seek novel avenues for intervention.

Tumorigenesis is highly correlated with the accumulation of mutations. The abundant and extensive DNA oxidation product, 8-Oxoguanine (8-oxoG), can cause mutations if it is not repaired by 8-oxoG repair systems. Therefore, the accumulation of 8-oxoG plays an essential role in tumorigenesis. To avoid the accumulation of 8-oxoG in the genome, base excision repair (BER), initiated by 8-oxoguanine DNA glycosylase1 (OGG1), is responsible for the removal of genomic 8-oxoG. It has been proven that 8-oxoG levels are significantly elevated in cancer cells compared with cells of normal tissues, and the induction of DNA damage by some antitumor drugs involves direct or indirect interference with BER, especially through inducing the production and accumulation of reactive oxygen species (ROS), which can lead to tumor cell death. In addition, the absence of the core components of BER can result in embryonic or early post-natal lethality in mice. Therefore, targeting 8-oxoG repair systems with inhibitors is a promising avenue for tumor therapy. In this study, we summarize the impact of 8-oxoG accumulation on tumorigenesis and the current status of cancer therapy approaches exploiting 8-oxoG repair enzyme targeting, as well as possible synergistic lethality strategies involving exogenous ROS-inducing agents.

The switch valve is the core component to achieve the rapid pressure change and accurate pressure control of electro-hydraulic brake system (EHBS). The normally closed switch valve (NCSV) is used as an outlet valve of the EHBS. The nonlinear flow controllability of the NCSV is one of the key technologies for the pressure control of the EHBS. The four working states of the NCSV are investigated by theoretical derivation and simulation analysis. The results show that the nonlinear flow of the NCSV is difficultly controlled due to the structural principle. Then, the pressure of the EHBS cannot be controlled accurately by the NCSV. In order to solve this problem, the structure of the traditional NCSV is modified to make the flow controllability better. The concept of “flow controllability factor”is proposed to evaluate nonlinear flow controllability of the two types of the NCSV comprehensively. The adaptive weight particle swarm optimization is used to further improve the nonlinear flow controllability of the new NCSV. After optimization, the flow controllability factor of the new NCSV is increased by 94.7%.

Compared with the traditional hydraulic hybrid system, step variable hydraulic hybrid power system has the advantages of low cost, fast response and pollution resistance. However, the existing variable elements are heavy, and the control valve group has the disadvantages of insufficient through-flow capacity, large flow resistance, large leakage and reversing impact. In this study, the hydraulic components integrated by the cartridge valve group which can replace the traditional three-position four-way valve group are applied to the hydraulic hybrid power system. The AMESim simulation models of directional cartridge valve and the step variable hydraulic hybrid power system are established in this study. Through simulation analysis, it is verified that the cartridge valve integrated element can replace the traditional reversing valve to solve the defects of cumbersome components and insufficient through-flow capacity. Some important parameters of the system components are simulated and analysed. The simulation results can be used to improve the design efficiency and ensure the design quality.

In this paper, a digital hydraulic variable control method based on multi-way valve spool displacement feedback is proposed, which combines the advantages of low cost and high reliability of the loader fixed displacement pump hydraulic system, and the distinguished energy saving effect of the loader variable pump hydraulic system. Based on the principle of hydraulic resistance, the mathematical model of flow-pressure of multi-way valve was established. Meanwhile, the theoretical structure of a valve spool suitable for digital hydraulic system was deduced. On this basis, an improvement scheme of the valve spool was proposed in combination with machining feasibility. The simulation model of multi-way valve was established, the correctness of which was verified by experiment with the significance test method, and the valve port parameters of the multi-way valve were optimized by genetic algorithm. The simulation model before and after optimization was analyzed by AMESim software. The simulation results showed that the digital hydraulic system can basically realize the function of a variable system, and the energy consumption was significantly reduced compared with the fixed displacement pump hydraulic system. The optimized valve spool structure of the digital hydraulic system had more stable load characteristics than the fixed displacement pump system and a larger speed range. The increase range accounts for about 27% of the total stroke.

Nuclear factor kappa B (NF-κB) activity is regulated by various posttranslational modifications, of which Ser276 phosphorylation of RelA/p65 is particularly impacted by reactive oxygen species (ROS). This modification is responsible for selective upregulation of a subset of NF-κB targets; however, the precise mechanism remains elusive. ROS have the ability to modify cellular molecules including DNA. One of the most common oxidation products is 8-oxo-7,8-dihydroguanine (8- oxoGua), which is repaired by the 8-oxoguanine DNA glycosylase1 (OGG1)-initiated base excision repair pathway. Recently, a new function of OGG1 has been uncovered. OGG1 binds to 8-oxoGua, facilitating the occupancy of NF-κB at promoters and enhancing transcription of pro-inflammatory cytokines and chemokines. In the present study, we demonstrated that an interaction between DNA-bound OGG1 and mitogen-and stress-activated kinase 1 is crucial for RelA/p65 Ser276 phosphorylation. ROS scavenging or OGG1 depletion/ inhibition hindered the interaction between mitogen-and stress-activated kinase 1 and RelA/p65, thereby decreasing the level of phospho-Ser276 and leading to significantly lowered expression of ROS-responsive cytokine/chemokine genes, but not that of Nfkbis. Blockade of OGG1 binding to DNA also prevented promoter recruitment of RelA/p65, Pol II, and pRNAP II in a gene-specific manner. Collectively, the data presented offer new insights into how ROS signaling dictates NF-κB phosphorylation codes and how the promoter-situated substrate-bound OGG1 is exploited by aerobic mammalian cells for timely transcriptional activation of ROS-responsive genes [ABSTRACT FROM AUTHOR]

In this study, two intramammary infusions of cefquinome sulfate were investigated for pharmacokinetics and bioavailability. Twelve lactating cows for each group were administered an effective dose of 75 mg/gland for cefquinome, with milk samples collected at various time intervals. The concentrations of cefquinome in milk at different times were determined by the UPLC-MS/MS method. Analyses of noncompartmental pharmacokinetics were conducted on the concentration of cefquinome in milk. Mean pharmacokinetic parameters of group A and group B following intramammary administration were as follows: AUClast 300558.57 ± 25052.78 ng/mL and 266551.3 ± 50654.85 ng/mL, Cmax 51786.35 ± 11948.4 ng/mL and 59763.7 ± 8403.2 ng/mL, T1/2 5.69 ± 0.62 h and 5.25 ± 1.62 h, MRT 7.43 ± 0.79 h and 4.8 ± 0.78 h, respectively. Pharmacokinetic experiments showed that the relative bioavailability of group B was 88.69% that of group A. From our findings, group B (3 g: 75 mg) shows a quicker drug elimination process than group A (8 g: 75 mg), which suggests that the withdrawal period for the new formulation may be shorter.

Granular activated carbon (GAC) supported SnO2, SnO2-Sb2Ox, and SnO2-Sb2Ox-CeO2 were prepared as particle electrodes for phenol electro-degradation. Sb doping could enhance surface property by providing more exposed active surface. Furthermore, Sb doping also enhances the voltammetry charge and the oxygen evolution potential of SnO2/GAC, and reduces the charge transfer resistance of SnO2/GAC particle electrode. Enhanced voltammetry charge indicates more active sites for phenol degradation; higher oxygen evolution potential indicates lower oxygen evolution and higher ▪OH formation; while lower charge transfer resistance indicates higher charge transfer capability of electrodes which favors phenol degradation. Although further doping of Ce could reduce carrier transfer efficiency, one the other hand, it reduces the Oads content on electrode surface, the voltammetry charge and the oxygen evolution potential of electrode, all of which could restrain phenol degradation efficiency. Due to above reasons, SnO2-Sb2Ox/GAC was the most active particle electrode for phenol degradation with the highest average current efficiency (ACE) of 60% and lower energy consumption (Esp) of 28.7 kWh/kg COD. Uv-vis and LG-MS reveal that Sb doping significantly suppressed benzenediol and benzoquinone formation, hence favoring phenol degradation.

Abstract Escherichia coli (E. coli) is an opportunistic pathogen that can cause clinical mastitis in dairy cows worldwide. Mastitis produces severe symptoms in dairy cows, such as udder inflammation, the production of harmful substances, reduced milk production, and altered milk quality. Intramammary injections of rifaximin have a beneficial effect on dairy cow mastitis, especially for mastitis caused by E. coli. However, we do not know whether the currently accepted clinical administration scheme is reasonable. Therefore, the purpose of this experiment was to evaluate the clinical dosing regimen for curing mastitis induced by E. coli. In this study, the pharmacokinetics of four single dose groups (50, 100, 200, and 400 µg/gland) were studied in CD-1 lactating mice, and the main pharmacokinetic parameters were obtained by non-compartment and two-compartment model of Phoenix 8.1 software. A total of 5,000 colony-forming units (CFU) of E. coli ATCC25922 were injected into the mammary glands of mice under anatomic microscope guidance. After 12 h of growth in vivo, the mouse mastitis model was successfully developed. In pharmacodynamics experiment, 12 different dosing regimens (doses ranged from 25 to 800 µg/gland and two dosing intervals of 12 and 24 h) were used to study the therapeutic potential of rifaximin for mastitis. The PK/PD model was established by integrating pharmacokinetics and pharmacodynamics using the inhibitory sigmoid Emax model. The optimal antibacterial effect was 2log10CFU/gland reduction of bacterial colony counts in vivo, when the magnitude of AUC24/MIC exceeded 57.80 h. A total of 57.80 h of AUC24/MIC was defined as a target value in the Monte Carlo simulation. The clinically recommended dosage regimen of 100 mg/gland every 12 h in a day achieved a 91.08% cure rate for the treatment of bovine mastitis caused by E. coli infection.

Deltamethrin, an important pyrethroid insecticide, is frequently detected in human samples. This study aims to assess the potential effects of deltamethrin on human health and investigate the patterns of residue enrichment and elimination in 112 healthy laying hens. These hens were administered 20 mg·kg−1 deltamethrin based on their body weight. Gas chromatography-mass spectrometry (GC-MS) was used to investigate the residue enrichment pattern and elimination pattern of deltamethrin in the hens. The results indicated a significant increase in the concentration of deltamethrin in chicken manure during the treatment period. By the 14th day of administration, the concentration of deltamethrin in the stool reached 13,510.9 ± 172.24 μg·kg−1, with a fecal excretion rate of 67.56%. The pulmonary deltamethrin concentration was the second highest at 3844.98 ± 297.14 μg·kg−1. These findings suggest that chicken feces contain substantial amounts of deltamethrin after 14 days of continuous administration, and that it can easily transfer to the lungs. After 21 days of drug withdrawal, the residual concentration of deltamethrin in the fat of laying hens was 904.25 ± 295.32 μg·kg−1, with a half-life of 17 days and a slow elimination rate. In contrast, the lungs showed relatively low elimination half-lives of 0.2083 days, indicating faster elimination of deltamethrin in this tissue. These results highlight differences in the rate of deltamethrin elimination in different tissues during drug withdrawal. The fat of laying hens exhibited the highest residue of deltamethrin and the slowest elimination rate, while the lungs showed the fastest elimination rate. Moreover, deltamethrin was found to accumulate in the edible tissues of eggs and laying hens, suggesting that humans may be exposed to deltamethrin through food.

Pyrethroid pesticides, with low toxicity to birds and mammals and short persistence in the environment, are widely used now. With the development of intensive poultry farming, pesticide application leads to residues in poultry products and pollution in ecological environment. The aim of the present study was to examine deltamethrin subchronic toxicity in laying chickens. One hundred and twelve laying chickens were randomly assigned to 14 groups including 13 groups medicated with deltamethrin (n = 8) and one unmedicated group used as control (n = 8). Tissue samples were collected during and after administration for weighing and histopathological analysis. A single dose of deltamethrin (20 mg·kg−1·BW·d) was administered orally to laying chickens for 14 days. The results showed that deltamethrin has no significant effect on the relative organ weight of laying chickens (p > 0.05). The activities of aspartate aminotransferase and cholinesterase in the plasma gradually decreased over time in the medicated group (p < 0.05). Plasma concentrations of urea nitrogen, uric acid, cholesterol, triglycerides, and creatinine significantly increased during treatment (p < 0.05), and significant liver damage and loss of intestinal villous epithelium were observed. The intestinal wall thickness, villus height, and crypt depth of laying chickens were altered by deltamethrin treatment. During treatment was withdrawn, the intestinal repair was more extensive than the liver repair.

As set in the maximum residue limit regulations of the European Commission, this study aimed to obtain the residual parameters in milk with optimized UPLC-MS/MS conditions and to determine the conclusive drug withdrawal period to ensure food safety. In this research, an ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was developed to study cefquinome sulfate’s residue elimination in milk and to calculate cefquinome’s withdrawal period. Twelve healthy cows free of endometritis were selected for the experiment. Before using the drug, the vaginal orifice and perineum of each cow was disinfected. One dose of intrauterine perfusion was used for each cow, followed by an additional dose after 72 h. Before administration and 12 h, 18 h, 24 h, 36 h, 42 h, 48 h, 60 h, 66 h, 72 h, 84 h, 90 h, and 96 h after the last dose, milk (10 mL) was gathered from each cow’s teat and pooled. For the measurement of cefquinome concentrations in milk, UPLC-MS/MS was performed. A calibration curve was generated using linear regression as follows: Y = 250.86X − 102.29, with a correlation coefficient of 0.9996; the limits of detection and the limits of quantitation were 0.1 μg·kg−1 and 0.2 μg·kg−1, respectively. The average recovery of cefquinome was 88.60 ± 16.33% at 0.2 μg·kg−1, 100.95 ± 2.54% at 10 μg·kg−1, and 97.29 ± 1.77% at 50 μg·kg−1. For 5 consecutive days at the three spiking levels, the intra and inter-day relative standard deviations (RSD) were 1.28%–13.73% and 1.81%–18.44%, respectively; the residual amount of cefquinome was less than the maximum residue limit of 20 μg·kg−1, 36 h after administration; and the residual amount was less than the limit of detection (0.1 μg·kg−1) 48 h after administration. The withdrawal time of cefquinome in cow’s milk was 39.8 h, as calculated using WTM1.4 software. In terms of clinical practical use, the withdrawal period of milk was temporarily set at 48 h after the administration of the cefquinome sulfate uterus injection to cows, in accordance with the recommended dose and course.

Imidocarb (IMD) is commonly used for treatment of eperythrozoon, babesia, piroplasma and trypanosoma in animals, but there are few studies on its pharmacokinetics in cattle. The purpose of this study was to obtain pharmacokinetic parameters and assess the bioequivalence of subcutaneous injections of two IMD formulations in cattle. Forty-eight healthy cattle, 24 males and 24 females, were randomLy divided into two groups (test group and reference group) with 12 males and 12 females per group. The generic IMD was injected subcutaneously with a single dose of 3.0 mg/kg in the test group. Reference group animals were given one injection of the marketed IMD at the same dosage. The limit of detection (LOD) and limit of quantification (LOQ) for IMD in cattle plasma were 0.05 ng/mL and 0.1 ng/mL, respectively. The recoveries ranged from 88.50% to 92.42%, and the equation of this calibration curve was Y = 13672.1X+187.43. The pharmacokinetics parameters of the test group showed that the maximum concentration of 2257.5±273.62 ng/mL was obtained at 2.14±0.67 h, AUC0-t 14553.95±1946.85 ng·h/mL, AUC∞ 15077.88±1952.19 ng·h/mL, T1/2 31.77±25.75 h, CL/F 0.14±0.02 mL/h/g, and Vz/F 6.53±5.34 mL/g. There was no significant difference in AUC0-t, AUC∞ and Cmax between the test group and the reference group (P>0.05). The 90% confidence interval of AUC0-t, AUC0-∞ and Cmax in the test group was included in 80%-125% AUC0-t, AUC0-∞ and 70%-143% Cmax in the reference group, respectively. Based on these results, the two preparations were found to be bioequivalent.

In this study, an ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was developed for the residue depletion of imidocarb (IMD) in bovine tissues, and the drug withdrawal time of IMD was determined. Twenty-five clinically healthy cattle (body weight 300 kg ± 15 kg) were randomly divided into five groups of five cattle each. The cattle were treated subcutaneously injecting a single dose of a generic IMD formulation, at the recommended dosage of 3.0 mg/kg. The five groups of cattle were slaughtered respectively at 96, 160, 198, 213, and 228 days after IMD administration. Samples from the liver, kidney, muscle, fat, and injection site were collected from each animal. After subtilis proteinase was used to digest the tissue, the content of IMD in the samples was analyzed by UPLC-MS/MS method. In conclusion, the method validation results showed that the method meets the criteria, and the longest withdrawal time of 224 days for the liver can be selected as the conclusive withdrawal time to guarantee consumer safety.

This paper reported the utilization of water spray for controlling H2S release in a confined space, which is especially important in industry. A typical spray tower was modified to simulate the confined space for people's enterable routine operation (e.g., pump room), in which the dilution capacity of water sprays can also be evaluated. This work consists of two parts: the first part focuses on the influences of different operating conditions on chemical dilution capacities of water sprays in mechanisms; the second one is comparison between two nozzle configurations for evaluating their feasibilities of practical application. Water sprays express eligible performance for H2S release control even though their dilution capacity was weakened at high gaseous concentrations and rates of releases. The presence of Na2CO3 can significantly improve absorption effectiveness of H2S in water and the optimal Na2CO3 additive was found to be 1.0 g·L−1 in this test. Compared with Na2CO3, adjusting water flow rate may be an effective strategy in enhancing dilution capacity of water sprays due to the fact that larger flow rate led to both less dilution time (TD) and dilution concentration (CD). Furthermore, multinozzle configuration is more efficient than single-nozzle configuration under the same water consumption.