Search

Ceramic-based composites are desirable lightweight materials for electromagnetic (EM) energy absorption. However, due to the lack of an effective electromagnetic wave attenuation mode, pure ceramics still face significant challenges in absorbing electromagnetic waves. It is still challenging to obtain advanced electromagnetic wave absorption (EMA) materials with low fillings, thin thickness, super absorption capacity, and effective absorption bandwidth (EAB) through clever microstructure design and appropriate multi-component strategy. Herein, a dielectric aluminosilicate/reduced graphene oxide (RGO) nanocomposite with different lithium content was constructed via a solvothermal sintering method. The microstructure and heterogeneous dielectric interface form perfect impedance matching, multiple polarization, coupling effects, and have excellent absorption performance. The absorbers display a minimal reflection loss (RLmin) of −51.95 dB by tuning the relaxation intensity, and the broadest covers all X band. In addition, the classic RCS simulation method to evaluate microwave absorption performance has practical application value in the field of radar stealth.

Performance degradation always occurs in carbon fibers/carbon nanotubes (CFs/CNTs) multi-scale reinforced composites prepared by chemical vapor deposition (CVD) method. In this study, pyrolytic carbon (PyC) interlayers are introduced to overcome this problem, and the mechanism is studied in detail. The multi-scale reinforcements are combined with lithium aluminosilicate (LAS) glass-ceramic into ceramic matrix composites by slurry impregnation and hot pressing sintering. The results show that the PyC interlayers can protect the CFs from corrosion of the catalyst at high temperature, improve stress transfers and promote the synergy between various components. The CNTs and LAS matrix form a transition area, which causes deflection and shunting when cracks propagate. These factors have greatly increased the crack extension energy, so the mechanical properties have been greatly improved. The flexural strength, fracture toughness and work of fracture reach 602 ± 55 MPa, 10.7 ± 2 MPa m1/2, 4.6 ± 0.7 kJ m−2, respectively, which are 42.3%, 42.6% and 76.9% higher than CF/LAS. This work expands the study of the CFs/CNTs multi-scale reinforcements and the LAS composites, and provides a useful reference for the related research.

Lithium aluminosilicate (LAS), as a ceramic material with ultra-low thermal expansion, has a wide application in the field of precision instruments. But the effective integration of multiple thermal functions, including low thermal expansion and high thermal conductivity, into one material remains a huge challenge. To obtain LAS composites with high thermal conductivity, AlN was added as the reinforcing phase in LAS matrix, which can form a perfect heat conduction network and act as bridges for transferring heat. The thermal conductivity of the composite reaches 12.8 W/(m K) when the AlN content increased to 40 wt%, which is more than 5 times higher than that of bulk LAS. At the same time, the composite still maintains a low coefficient of thermal expansion of less than 3.2 × 10-6/K which matching that of silicon. Therefore, the proper combination between the components of composites is beneficial to the preparation of AlN/LAS composites with both low thermal expansion and excellent thermal conductivity.

The faithful engineering of complex human tissues such as the bone/soft tissue/mineralized tissue interface in periodontal tissues requires innovative molecular cues in conjunction with tailored scaffolds. To address the loss of periodontal bone and connective tissues following periodontal disease, we have generated a polydopamine and collagen coated electrospun PLGA-PCL (PP) scaffold enriched with the small molecule mediator PFI-2 (PP-PFI-pDA-COL-PFI). In vitro 3D studies using PDL progenitors revealed that the PP-PFI-pDA-COL-PFI scaffold substantially enhanced Alizarin Red staining, increased Ca/P ratios 4-fold, and stimulated cell proliferation more than 12-fold compared to PP-controls, suggestive of its potential for mineralized tissue engineering. When applied in our experimental periodontitis model, the PP-PFI-pDA-COL-PFI scaffold resulted in a substantial 34% reduction in alveolar bone defect height, a 25% root-length gain in periodontal attachment, and the formation of highly ordered regenerated acellular cementum twice as thick as in controls. Explaining the mechanism of PFI-2 mineralized tissue regeneration in periodontal tissues, PFI-2 inhibited SETD7-mediated β-Catenin protein methylation and increased β-Catenin nuclear localization. Together, dual-level PFI-2 incorporation into a degradable, dopamine/collagen coated PLGA/PCL scaffold backbone resulted in the regeneration of the tripartite periodontal complex with unprecedented fidelity, including periodontal attachment and new formation of mineralized tissues in inflamed periodontal environments.

Dentin sialophosphoprotein (DSPP) is an extracellular matrix protein that is highly expressed in odontoblasts, but only transiently expressed in presecretory ameloblasts during tooth development. We previously generated a knockin mouse model expressing a mouse equivalent (DSPP, p.P19L) of human mutant DSPP (p.P17L; referred to as “DsppP19L/+”), and reported that DsppP19L/+ and DsppP19L/P19L mice manifested a dentin phenotype resembling human dentinogenesis imperfecta (DGI). In this study, we analyzed pathogenic effects of mutant P19L-DSPP on enamel development in DsppP19L/+ and DsppP19L/P19L mice. Micro-Computed Tomography (μCT) analyses of 7-week-old mouse mandibular incisors showed that DsppP19L/P19L mice had significantly decreased enamel volume and/or enamel density at different stages of amelogenesis examined. Acid-etched scanning electron microscopy (SEM) analyses of mouse incisors demonstrated that, at the mid-late maturation stage of amelogenesis, the enamel of wild-type mice already had apparent decussating pattern of enamel rods, whereas only minute particulates were found in DsppP19L/+ mice, and no discernible structures in DsppP19L/P19L mouse enamel. However, by the time that incisor enamel was about to erupt into oral cavity, distinct decussating enamel rods were evident in DsppP19L/+ mice, but only poorly-defined enamel rods were revealed in DsppP19L/P19L mice. Moreover, μCT analyses of the mandibular first molars showed that DsppP19L/+ and DsppP19L/P19L mice had a significant reduction in enamel volume and enamel density at the ages of 2, 3, and 24weeks after birth. Backscattered and acid-etched SEM analyses revealed that while 3-week-old DsppP19L/+ mice had similar pattern of enamel rods in the mandibular first molars as age-matched wild-type mice, no distinct enamel rods were observed in DsppP19L/P19L mice. Yet neither DsppP19L/+ nor DsppP19L/P19L mice showed well-defined enamel rods in the mandibular first molars by the age of 24weeks, as judged by backscattered and acid-etched SEM. In situ hybridization showed that DSPP mRNA level was markedly reduced in the presecretory ameloblasts, but immunohistochemistry revealed that DSP/DSPP immunostaining signals were much stronger within the presecretory ameloblasts in Dspp mutant mice than in wild-type mice. These results suggest that mutant P19L-DSPP protein caused developmental enamel defects in mice, which may be associated with intracellular retention of mutant DSPP in the presecretory ameloblasts.

The application of ceramic materials is limited due to the complicated preparation process and intrinsic brittleness. In this work, a pressureless manufacturing route that enables the formation of barium aluminosilicate (BAS) glass-ceramic consisting of internal β-Sialon fibers with enhanced thermal conductivity is developed. By adjusting the carbon source content, composites with different Sialon contents can be easily fabricated. The thermal conductivity of the sample with 3.5 wt.% is improved to 5.845 W/m ∙ K with the Sialon content of 26 wt.% in the composite, which is 112.64 % higher than that of the pure BAS matrix. The theoretical models suggest that the enhanced thermal conductivity is mainly ascribed to the thermal conduction network constructed by Sialon fibers. This work provides a method with industrial application prosperity to fabricate the high temperature ceramic matrix composite of different sizes and complex shapes.

Objective Adenomatoid odontogenic tumor (AOT) was classified by WHO as a mixed odontogenic tumor in 1992 and reclassified as an epithelial-only tumor in 2005 without clear rationale. The purpose of this study was to investigate if there was any evidence to suggest AOT might be a mixed odontogenic tumor. Study Design Immunohistochemical studies with nestin, dentin sialophosphoprotein (DSPP), cytokeratin, and vimentin were performed using 21 cases of AOT and the staining results were analyzed according to the various morphologic patterns seen in AOT. Sirius red stain was used to detect presence of collagen types I and III in AOT products. Results Our results showed that 20/21 (95.23%), 0/21 (0%), 21/21 (100%), and 20/21 (95.23%) cases expressed nestin, DSPP, cytokeratin, and vimentin, respectively. Some cells in rosette/duct-like structures (RDS) expressed nestin, vimentin or both, without cytokeratin. Co-expression of vimentin and cytokeratin, or nestin, cytokeratin, and vimentin were noted in some cells. Sirius red was positive in eosinophilic products in RDS, double-layered spheres and dentinoid. Conclusion Although most AOT cells appear epithelial, there is a small population of cells expressing mesenchymal proteins and secreting collagen types I and III. These evidence suggests that AOT is a mixed odontogenic tumor.

FAM20C (family with sequence similarity 20 – member C) is a protein kinase that phosphorylates secretory proteins, including the proteins that are essential to the formation and mineralization of calcified tissues. Previously, we reported that inactivation of Fam20c in mice led to hypophosphatemic rickets/osteomalacia along with increased circulating fibroblast growth factor 23 (FGF23) levels and dental defects. In this study, we examined whether a high-phosphate (hPi) diet could rescue the skeletal defects in Fam20c-deficient mice. Fam20c conditional knockout (cKO) mice were generated by crossing female Fam20c-floxed mice (Fam20cfl/fl) with male Sox2-Cre;Fam20cfl/+ mice. The pregnant female Fam20cfi/fl mice were fed either a normal or hPi diet until the litters were weaned. The cKO and control offspring were continuously given a normal or hPi diet for 4 weeks after weaning. Plain X-ray radiography, micro-CT, histology, immunohistochemistry (FGF23, DMP1, OPN, and SOX9), and in situ hybridization (type II and type X collagen) analyses were performed to evaluate the effects of an hPi diet on the mouse skeleton. Plain X-ray radiography and micro-CT radiography analyses showed that the hPi diet improved the shape and mineral density of the Fam20c-deficient femurs/tibiae, and rescued the growth plate defects in the long bone. Histology analyses further demonstrated that an hPi diet nearly completely rescued the growth plate-widening defects in the long bone and restored the expanded hypertrophic zone to nearly normal width. These results suggested that the hPi diet significantly improved the skeletal development of the Fam20c-deficient mice, implying that hypophosphatemia partially contributed to the skeletal defects in Fam20c-deficient subjects.

FAM20C (family with sequence similarity 20-member C), a kinase that phosphorylates secretory proteins, plays essential roles in various biological processes. In humans, mutations in FAM20C gene cause Raine syndrome, an autosomal recessive hereditary disease manifesting a broad spectrum of developmental defects including skeletal and craniofacial deformities. Our previous studies revealed that inactivation of Fam20c in mice led to hypophosphatemic rickets and that high phosphate (hPi) diet significantly improved the development of the skeleton in Fam20c-deficient mice. In this study, we evaluated the effects of hPi diet on the formation of dentin in Fam20c-deficient mice, using plain x-ray radiography, micro–computed tomography (μCT), histology, and immunohistochemistry. Plain x-ray radiography and μCT analyses showed that the hPi diet improved the dentin volume fraction and dentin mineral density of the Fam20c-deficient mice. Histology analyses further demonstrated that the hPi diet dramatically improved the integrity of the mandibular first molars and prevented pulp infection and dental abscesses in Fam20c-deficient mice. Our results support that the hPi diet significantly increased the formation and mineralization of dentin in Fam20c-deficient mice, implying that hypophosphatemia is a significant contributor to the dentin defects in Fam20c-deficient subjects.

Upon endoplasmic reticulum (ER) stress, inositol-requiring enzyme 1 (IRE1) is activated and catalyzes a nonconventional splicing of an unspliced X-box binding protein 1 (XBP1U) mRNA to yield a spliced XBP1 (XBP1S) mRNA that encodes a potent XBP1S transcription factor. XBP1S is a key mediator of the IRE1 branch that is essential for alleviating ER stress. We generated a novel mouse strain (referred to as “Xbp1(CS/+)” mice) that constitutively expressed XBP1S after Cre recombinase-mediated recombination. Further breeding of these mice with Twist2 Cre recombinase (Twist2-Cre) knock-in mice generated Twist2-Cre;Xbp1(CS/+) mice. Most Twist2-Cre;Xbp1(CS/+) mice died shortly after birth. Reverse-transcription polymerase chain reaction (RT-PCR) showed that constitutive expression of XBP1S occurred in various mouse tissues examined, but not in the brain. Immunohistochemistry confirmed that although the immunostaining signals for total XBP1 (XBP1U and XBP1S) were found in the calvarial bones in both Twist2-Cre;Xbp1(CS/+) and control mice, the signals for XBP1S were only detected in the Twist2-Cre;Xbp1(CS/+) mice, but not in the control mice. These results suggest that a precise control of XBP1S production is essential for normal mouse development.

Background Context Family with sequence similarity 20-member C (FAM20C) is a protein kinase that is responsible for the phosphorylation of many secretory proteins; however, its roles in spine or vertebra development have not be studied. Purpose The aim of this investigation is to analyze the roles of FAM20C in vertebra development. Study Design/Setting A mouse study of the Fam20c gene using conditional knockout to assess the effects of its inactivation on vertebra development. Methods By breeding Sox2-Cre mice with Fam20cflox/flox mice, Sox2-Cre;Fam20cflox/flox mice (abbreviated as cKO mice) are created. X-ray radiography, resin-casted scanning electron microscopy, Hematoxylin and Eosin staining, safranin O staining, Goldner's Masson trichrome staining, Von Kossa staining, tartrate-resistant alkaline phosphatase staining, immunohistochemistry staining, Western Immunoblotting and real-time PCR were employed to characterize the vertebrae of cKO mice compared to the normal control mice. Results Inactivation of Fam20c in mice results in remarkable spine deformity, severe morphology and mineralization defects, altered levels of osteoblast differentiation markers, reduction of activity of the Wnt/β-catenin signaling pathway and reduced level of osteoclastogenesis in the vertebrae. Conclusions FAM20C plays an essential role in vertebral development; it may regulate vertebral formation through the Wnt/β-catenin signaling pathway. Clinical significance Mutations in the human FAM20C gene are associated with Raine syndrome. The findings of this study provide valuable clues for the clinical management of Raine syndrome regarding spine manifestations in patients.

Developing high-performance dielectric absorbers, low filler loading, and a broad absorption band remains a great challenge for wireless data communication systems, household appliances, local area network, and so on. Herein, we report a facile green method to design and fabricate a copper-coated tin/reduced graphene oxide (Cu@Sn/rGO) composites with a heterojunction obtained by modifying a Schottky junction. The unique heterojunction can enable an appropriate balance between impedance and strong loss capacity. Meanwhile, it can not only promote the carrier migration but also obtain the rich interfaces. Consequently, a Cu@Sn/rGO composite with a heterojunction exhibits superior absorption intensity, far surpassing that of other absorbing materials reported. With a weight content of only 5 wt %, the maximum absorptivity reaches -49.19 dB at 6.08 GHz, and an effective absorption bandwidth (RL < -10 dB) of 13.94 GHz is achieved when the absorber's thickness ranges from 1.7 to 5.5 mm. This study provides new insights into the design and synthesis of a novel microwave absorption material with lightweight, smaller filler loading, and strong reflection loss.

Non-precious cobalt-based oxide nanoarrays with a doping of other metal ions have been reported as promising electrocatalysts for the oxygen evolution reaction (OER) of electrochemical water splitting. However, the influence of doped metal ions on their catalytic characteristic and inactivation mechanism for the OER at large current densities (> 500 mA cm−2) are rarely studied. Here, carbon fiber paper (CFP) possesses three-dimensional (3D) macroporous structure, excellent electrical performance and high stability, which is employed as the substrate material. Homogeneous CoxNi3-xO4, CoxMn3-xO4 and CoxCe3-xO4 nanowire arrays grown on CFP (CoNiO-NWs/CFP, CoMnO-NWs/CFP and CoCeO-NWs/CFP, respectively) are successfully fabricated by using the facile methods of hydrothermal synthesis and thermal decomposition. The CoNiO-NWs/CFP electrode at a current density of 1000 mA cm−2 achieve high OER stability of approximately 130 h, which is higher than that of clean Co3O4 nanowire array, CoMnO-NWs/CFP and CoCeO-NWs/CFP electrodes. The incorporation of the Ni in the spinel Co3O4 nanowires improves its electrocatalytic activity and long-term stability at large current densities. In contrast, the doping of the Mn and Ce to spinel Co3O4 nanowires has the opposite effect. This research shows that the inactivation mechanism of nanoarray electrodes for the OER of large current densities differs from traditional metal-oxide electrodes.

A series of new red-orange emission phosphors Na2BaMg(PO4)2:Pr3+ were synthesised by a high-temperature solid-state reaction. The crystal structure and photoluminescence properties of these samples were characterised by X-ray diffraction and spectroscopic measurements. This compound holds P3̅m1 space group of the trigonal system with the lattice parameters of hexagonal cell a=0.5304(3) nm and c=0.6989(3) nm. The phosphor emits the strongest peak at 606 nm when excited by 449 nm. The average Commission Internationale de l’Eclairage chromaticity coordinates calculated for the phosphors are (0.52, 0.46). The results demonstrate the potential application of these phosphors in solid-state lighting and other fields.

Pr 3+ -doped Na 2 SrMg(PO 4 ) 2 phosphors were successfully prepared by high temperature solid-state reaction. The phosphors were confirmed to be pure crystalline phase of Na 2 SrMg(PO 4 ) 2 . The different substitutional sites and photoluminesent properties of the Pr 3+ ions in Na 2 SrMg(PO 4 ) 2 were experimentally investigated in detail. The optimum doped concentrations of Pr 3+ ions replace the host Na + , Sr 2+ , Mg 2+ were determined and they are 1.0 mol%, 0.5 mol%, and 1.5 mol%, respectively. The phosphors could be excited by blue light and showed a reddish yellow emission with the strongest peak at 599 nm. The nine 4f levels corresponding to the f-f transitions of Pr 3+ ions were identified. The average crystallite sizes and the critical distances of Pr 3+ ions substitute Na + , Sr 2+ , Mg 2+ sites are found to be about 46.4, 47.9, 45.2 nm, and 31.43, 39.60, 27.46 A, respectively. The average CIE chromaticity coordinates of the Pr 3+ -doped Na 2 SrMg(PO 4 ) 2 phosphors upon 444 nm excitation are also proved that the emissions are located in the reddish yellow region. These results reveal that Na 2 SrMg(PO 4 ) 2 :Pr 3+ presents good photoluminescent properties and could be a potential candidate material for lighting application.

FAM20C mutations in humans cause Raine syndrome and our previous studies showed that global inactivation of mouse Fam20C led to bone and dental defects. By crossbreeding 2.3 kb Col 1a1-Cre mice with Fam20C flox/flox mice, we created 2.3 kb Col 1a1-Cre;Fam20C foxl/flox (cKO) mice, in which Fam20C was inactivated in cells expressing Type I collagen. This study showed that the long bones of cKO mice were shorter and had a lower level of mineralization compared to the normal mice. The collagen fibrils in Fam20C-deficient bone were disorganized and thicker while the growth plate cartilage in cKO mice was disorganized and wider compared to the normal mice. The Fam20C-deficient bone had a lower level of dentin matrix protein 1, and higher levels of osteopontin and bone sialoprotein than the normal. The blood of cKO mice had an elevated level of fibroblast growth factor 23 and reduced level of phosphorus. These findings indicate that inactivation of Fam20C in cells expressing type I collagen led to skeletal defects and hypophosphatemia. The altered levels of dentin matrix protein 1 and osteopontin in Fam20C-deficient bone may be significant contributors to the mineralized tissue defects in human patients and animals suffering from the functional loss of FAM20C.

Objectives The Bone Morphogenetic Proteins (BMPs) direct tooth development and still express in the adult tooth. We hypothesized that inhibition of BMP function would therefore disrupt dentinogenesis by differentiated odontoblasts. Methods We generated mice overexpressing the BMP-inhibitory protein Noggin in differentiated odontoblasts and osteocytes under control of a Dmp1 promoter-driven cre transgene. We compared the dentin phenotype in these mice with that in WT littermates and in mice with a Smad4 odontoblast/osteocyte knockout mediated by the same cre and therefore lacking all BMP and Tgfβ signaling in the same tissues. Results Three-month-old first molars from both Noggin-expressing and Smad4-deleted mice showed decreased dentin volume with enlarged pulp cavities, and both displayed less organized and mineralized dentinal tubules compared to WT. The Smad4-ablated phenotype was more severe. While dentin sialophosphoprotein (DSPP) and bone sialoprotein (BSP) were decreased in the dentin of both lines, dentin matrix protein 1 (DMP1) was sharply increased in Noggin-expressing teeth. Conclusions The phenotypes we observed in Noggin-overexpressing and Smad4-conditional knockout teeth resemble the phenotype of Dentinogenesis Imperfecta (DGI) type III. Our results show that BMPs regulate post-natal dentinogenesis and that BMP-inhibitory proteins like Noggin play a role in that regulation. The increased severity of the Smad4 phenotype indicates that Tgfβ ligands, in addition to BMPs, play a crucial role in post-developmental dentinogenesis.

Mutations in the gene encoding family with sequence similarity 20, member A (FAM20A) caused amelogenesis imperfecta (AI), in humans. However, the roles of FAM20A in amelogenesis and dentinogenesis are poorly understood. In this study, we generated a Fam20a knockout (Sox2-Cre;Fam20a(fl/fl)) mouse model by crossing Fam20a(fl/fl) mice with Sox2-Cre transgenic mice, in which Fam20a was ablated in both dental epithelium and dental mesenchyme. We found that these mice developed an enamel phenotype that resembles human AI associated with FAM20A mutations, but did not have apparent dentin defects. The secretory stage ameloblasts in the mandibular incisors from the Sox2-Cre;Fam20a(fl/fl) mice were shorter and detached from the enamel matrix, and subsequently lost their polarity, became disorganized and formed numerous spherical extracellular matrices in place of normal enamel. At the molecular level, the Sox2-Cre;Fam20a(fl/fl) mice displayed dramatically reduced expression levels of the genes encoding the enamel matrix proteins, but unaltered levels of the genes encoding the dentin matrix proteins. Moreover, Fam20a ablation resulted in a great decrease in FAM20C protein level, but it did not alter the intracellular localization of FAM20C protein in ameloblasts and odontoblasts. These results indicate that FAM20A is essential for amelogenesis, but is dispensable for dentinogenesis.

Dentin sialophosphoprotein (DSPP) is an extracellular matrix protein highly expressed by odontoblasts in teeth. DSPP mutations in humans may cause dentinogenesis imperfecta (DGI), an autosomal dominant dentin disorder. We recently generated a mouse model (named “ DsppP19L/+mice”) that expressed a mutant DSPP in which the proline residue at position 19 was replaced by a leucine residue. We found that the DsppP19L/+and DsppP19L/P19Lmice at a younger age displayed a tooth phenotype resembling human DGI type III characterized by enlarged dental pulp chambers, while the teeth of older DsppP19L/+and DsppP19L/P19Lmice had smaller dental pulp chambers mimicking DGI type II. The teeth of DsppP19L/+and DsppP19L/P19Lmice had a narrower pulp chamber roof predentin layer, thinner pulp chamber roof dentin, and thicker pulp chamber floor dentin. In addition, these mice also had increased enamel attrition, accompanied by excessive deposition of peritubular dentin. Immunohistochemistry, in situ hybridization, and real-time polymerase chain reaction analyses showed that the odontoblasts in both DsppP19L/+and DsppP19L/P19Lmice had reduced DSPP expression, compared to the wild-type mice. We also observed that the levels of DSPP expression were much higher in the roof-forming odontoblasts than in the floor-forming odontoblasts in the wild-type mice and mutant mice. Moreover, immunohistochemistry showed that while the immunostaining signals of dentin sialoprotein (N-terminal fragment of DSPP) were decreased in the dentin matrix, they were remarkably increased in the odontoblasts of the DsppP19L/+and DsppP19L/P19Lmice. Consistently, our in vitro studies showed that the secretion of the mutant DSPP was impaired and accumulated within endoplasmic reticulum. These findings suggest that the dental phenotypes of the mutant mice were associated with the intracellular retention of the mutant DSPP in the odontoblasts of the DSPP-mutant mice.

Intervertebral disc (IVD) disorder is often caused by the defect of annulus fibrosus (AF), especially that of the outer AF. Studies about the mechanisms governing the development of the outer AF are needed for a better understanding of pathogenesis of IVD defects. Glycosaminoglycans (GAGs) are essential components of extracellular matrix (ECM) in AF. FAM20B is a newly identified xylose kinase that catalyzes the biosynthesis of GAGs. In this study, we created Fam20B conditional knockout (cKO) mice in which FAM20B was inactivated in type I collagen-expressing cells, the main type of cells in the outer AF of IVD. The cKO mice showed severe spine deformity and remarkable IVD defects associated with AF malformation. The AF of cKO mice had a lower level of chondroitin sulfate and heparan sulfate, and the outer AF cells lost their normal fibroblast-like morphology and acquired chondrocyte phenotypes, expressing a higher level of Sox 9 and type II collagen along with a reduced level of type I collagen. The level of phospho-Smad 2 and phospho-Smad 3, and that of scleraxis, a downstream target molecule of canonical TGF-β signaling pathway were significantly lower in the AF of cKO mice. The AF in cKO mice also manifested altered levels in the molecules associated with the activations of MAPK pathway; the changes included the increase of phospho-P38 and phospho-ERK and a decrease of phospho-JNK. These results indicate that FAM20B plays an essential role in the development of AF by regulating the TGF-β signaling and MAPK signaling pathways.

The energetic stability and electronic structures of H, OH, F, or Cl passivated α-Si 3 N 4 nanobelts orientating along various directions are systematically investigated via first-principles calculations. The results show that the stability of nanobelts is more sensitive to the surface passivation than growth direction. It decreases in the order of (100% OH), (50% H, 50% OH), (50% H, 50% F), (100% F), (50% H, 50% Cl), (100% Cl), (100% H), and unpassivation. H atoms prefer to bond with surface N atoms of nanobelts, while OH, F and Cl prefer to bond with Si atoms of nanobelts. In addition, the surface passivation greatly changes the electronic structures of nanobelts. The OH and F passivations result in the larger band gaps than the Cl passivation. While the coverage of OH, F or Cl increases to 100%, their band gaps decrease significantly, indicating an improvement of electrical properties, which is good agreement with the experimental findings. The 100% Cl-passivated nanobelt orientating along the [011] direction possesses the smallest band gap of 1.038 eV. The band gaps are found to be affected by a competition between quantum confinement effect and the role of the surface passivated groups or atoms at the band-gap edges.

The structural stability, electronic and optical properties of α-Si3N4 nanobelts orientating along the different directions with surface H, F and Cl modifications are investigated using first-principles methods. The stabilities of α-Si3N4 nanobelts are greatly affected by the surface modifications and increased in the order of H, Cl and F. All the modified α-Si3N4 nanobelts exhibit semiconductor characteristics. The effective masses of nanobelts are mainly affected by their orientations as well as surface modifications. The band gaps of α-Si3N4 nanobelts are found to be modulated by surface modifications. The Cl-modified nanobelts result in a smaller band gap than that of H- or F-modified ones. The electronic properties of α-Si3N4 nanobelts have significantly affected their optical properties. The linear light response ranges are mainly located in the ultraviolet region, where the absorption and refraction of light mainly occur, while the reflection is very weak. As the halogen coverage increases to 100%, the absorption edges of α-Si3N4 nanobelts have an obvious red-shift and new dielectric peaks appear. The Cl-modified nanobelts possess higher ε2(ω) peaks, lower absorption edges and better photoelectric characteristics than those of H- or F-modified nanobelts. The static optical parameters ε(0) and n(0) of 100% Cl-modified α-Si3N4 nanobelts are significantly larger than those of other nanobelts, indicating special applications in certain optical components.

Dentin matrix protein 1 (DMP1) is found abundantly in the extracellular matrices of bone and dentin. Secretory DMP1 begins with a tripeptide of leucine-proline-valine (LPV) after the endoplasmic reticulum (ER)-entry signal peptide is cleaved. The goal of this study was to determine the role of the LPV motif in the secretion of DMP1. A series of DNA constructs was generated to express various forms of DMP1 with or without the LPV motif. These constructs were transfected into a preosteoblast cell line, the MC3T3-E1 cells, and the subcellular localization and secretion of various forms of DMP1 were examined by immunofluorescent staining and Western-blotting analyses. Immunofluorescent staining showed that the LPV-containing DMP1 variants were primarily localized in the Golgi complex, whereas the LPV-lacking DMP1 variants were found abundantly within the ER. Western-blotting analyses demonstrated that the LPV-containing DMP1 variants were rapidly secreted from the transfected cells, as they did not accumulate within the cells, and the amounts increased in the conditioned media over time. In contrast, the LPV-lacking DMP1 variants were predominantly retained within the cells, and only small amounts were secreted out of the cells over time. These results suggest that the LPV motif is essential for the efficient export of secretory DMP1 from the ER to the Golgi complex.

Family with sequence similarity 20-member C (FAM20C), a recently characterized Golgi kinase, performs numerous biological functions by phosphorylating more than 100 secreted proteins. However, the role of FAM20C in the salivary glands remains undefined. The present study demonstrated that FAM20C is mainly located in the cytoplasm of duct epithelial cells in the salivary glands. Fam20cf/f; Mmtv-Cre mice were created in which Fam20c was inactivated in the salivary gland cells and observed that the number of ducts and the ductal cross-sectional area increased significantly, while the number of acinar cells was reduced. The granular convoluted tubules (GCTs) exhibited an accumulation of aberrant secretory granules, along with a reduced expression and altered distribution patterns of β nerve growth factor, α-amylase and bone morphogenetic protein (BMP) 4. This abnormality suggested that the GCT cells were immature and exhibited defects in developmental and secretory functions. In accordance with the morphological alterations and the reduced number of acinar cells, FAM20C deficiency in the salivary glands significantly decreased the salivary flow rate. The Na+, Cl− and K+ concentrations in the saliva were all significantly increased due to dysfunction of the ducts. Furthermore, Fam20c deficiency significantly increased BMP2 and BMP7 expression, decreased BMP4 expression, and attenuated the canonical and noncanonical BMP signaling pathways in the salivary glands. Collectively, the results of the present study demonstrate that FAM20C is a key regulator of acinar and duct structure and duct maturation and provide a novel avenue for investigating novel therapeutic targets for oral diseases including xerostomia.

Here, we demonstrate that nonprecious CoFe-based oxide nanoarrays exhibit excellent electrocatalytic activity and superior stability for electrochemical oxygen evolution reaction (OER) at large current densities (>500 mA cm-2). Carbon fiber paper (CFP) with three-dimensional macroporous structure, excellent corrosion resistance, and high electrical properties is used as the support material to prevent surface passivation during the long-term process of OER. Through a facile method of hydrothermal synthesis and thermal treatment, vertically aligned arrays of spinel Co xFe3- xO4 nanostructures are homogeneously grown on CFP. The morphology and the Fe-doping content of the CoFe oxide nanoarrays can be controlled by the Fe3+ concentration in the precursor solution. The arrays of CoFe oxide nanosheets (NSs) grown on CFP (Co2.3Fe0.7O4-NSs/CFP) deliver lower Tafel slope (34.3 mV dec-1) than CoFe oxide nanowire (NW) arrays grown on CFP (Co2.7Fe0.3O4-NWs/CFP) in alkaline solution, owing to higher Fe-doping content and larger effective specific surface area. The Co2.3Fe0.7O4-NSs/CFP electrode exhibits excellent stability for OER at large current densities in alkaline solution. Moreover, the morphology and structure of CoFeO nanoarrays are well preserved after long-term testing, indicating the high stability for OER.

The glycosaminoglycan (GAG) chains attached to the core proteins of proteoglycans exert multiple roles, such as enriching signal molecules and regulating the binding of ligands to the corresponding receptors. A newly identified kinase - family with sequence similarity 20 member B (FAM20B) - is essential for the formation of GAG chains. The FAM20B protein phosphorylates the initial xylose on the side chain of a serine residue in the protein. Although the GAG chains of proteoglycans are believed to be indispensable during craniofacial development, there are few reports on their exact functions in craniofacial organogenesis. In this study, by mating Wnt1-cre mice with Fam20b-floxed mice (Fam20bflox/flox), we created Wnt1-Cre;Fam20bflox/flox mice in which Fam20b is ablated in the neural crest-derived mesenchyme. The Wnt1-Cre;Fam20bflox/flox mice died immediately after birth because of complete cleft palates. In addition to cleft palate, Wnt1-Cre;Fam20bflox/flox mice also manifested tongue elevation, micrognathia, microcephaly, suture widening, and reduced mineralization in the calvaria, facial bones, and temporomandibular joint. These findings indicate that the proteoglycans formed through the catalysis of FAM20B are essential for the morphogenesis and mineralization of the craniofacial complex.

FAM20C mutations compromise the mineralization of skeleton and tooth in both human and mouse. Putatively, the mineralization disorder is attributed to the elevated fibroblast growth factor 23 (FGF23), which reduced the serum phosphorus by suppressing the reabsorption of phosphorus in kidney. Besides the regulation on systemic phosphorus homeostasis, FAM20C was also implicated to regulate cell behaviors and gene expression through a cell-autonomous manner. To identify the primary effects of Fam20c on dental mesenchymal cells, mouse Fam20c-deficient dental mesenchymal cells were generated by removing the floxed alleles from the immortalized mouse Fam20cf/f dental mesenchymal cells with Cre-expressing lentivirus. The removal of Fam20c exerted no impact on cell morphology, but suppressed the proliferation and mobility of the dental mesenchymal cells. Fam20c deficiency also significantly reduced the expression of Osterix, Runx2, type I Collagen a 1 (Col1a1), Alkaline phosphatase (Alpl) and the members of the small integrin-binding ligand, N-linked glycoprotein (SIBLING) family, but increased Fgf23 expression. Consistently, the in vitro mineralization of Fam20c-deficient dental mesenchymal cells was severely disabled. However, supplements of the non-collagenous proteins from wild type rat dentin failed to rescue the compromised mineralization, suggesting that the roles of FAM20C in tooth mineralization are more than phosphorylating local matrices and regulating systemic phosphorus metabolism. Moreover, the down-regulated BMP signaling pathways in the Fam20c deficient dental mesenchymal cells revealed that the kinase activity of FAM20C might be required to maintain BMP signaling. In summary, our study discloses that Fam20c indeed regulates cell behaviors and cell signaling pathway in a cell-autonomous manner.

Background and Objective The use of cyclosporine A induces fibrous enlargement of the gingival connective tissue. Existing treatment modalities, although effective, do not necessarily prevent the recurrence of the lesion. Emerging evidence indicates that tanshinone IIA (Tan IIA) could effectively attenuate a variety of fibrotic diseases. The present research aims to assess whether Tan IIA can effectively alleviate the gingival fibrous overgrowth induced by cyclosporine A. Material and Methods Forty-five Wistar rats were divided into the no-treatment control group, cyclosporine A-treated group and the group treated with a combination of cyclosporine A and Tan IIA. Paraffin-embedded sections of mandibular first molar regions were selected for hematoxylin and eosin staining, Masson's trichrome staining, picro-sirius red staining and immunohistochemistry analyses of transforming growth factor-β1 (TGF-β1), tissue inhibitor of metalloproteinase-1 (TIMP-1) and matrix metalloproteinase-1 (MMP-1). The gingival connective tissue area was measured and numbers of the TGF-β1-, TIMP-1- and MMP-1-positive cells were counted. The analysis of variance for factorial designs for testing the overall differences and Fisher least significant difference test for post hoc analysis were used to determine the significance levels. Results Cyclosporine A treatment led to overgrowth of gingival connective tissue in rats. In the cyclosporine A-treated rats, the expression of TGF-β1 and TIMP-1 was significantly upregulated, whereas expression of the MMP-1 was downregulated, along with thicker and denser collagen fibers. In rats treated with a combination of cyclosporine A and Tan IIA, the cyclosporine A-induced changes were alleviated. Conclusions Cyclosporine A enhanced gingival fibrous overgrowth via upregulation of the TGF-β1 and TIMP-1 expression, and downregulation of MMP-1 expression. Tan IIA can effectively prevent cyclosporine A-induced gingival fibrous overgrowth in rats by downregulating TGF-β1 and TIMP-1 expression, and upregulating MMP-1 expression.

Tooth formation is tightly regulated by epithelial-mesenchymal interactions via hierarchic cascades of signaling molecules. The glycosaminoglycan (GAG) chains covalently attached to the core protein of proteoglycans (PGs) provide docking sites for signaling molecules and their receptors during the morphogenesis of tissues and organs. Although PGs are believed to play important roles in tooth formation, little is known about their exact functions in this developmental process and the relevant molecular basis. Family with sequence similarity member 20-B (FAM20B) is a newly identified kinase that phosphorylates the xylose in the common linkage region connecting the GAG with the protein core of PGs. The phosphorylation of xylose is essential for elongation of the common linkage region and the subsequent GAG assembly. In this study, we generated a Fam20B-floxed allele in mice and found that inactivating Fam20B in the dental epithelium leads to supernumerary maxillary and mandibular incisors. This finding highlights the pivotal role of PGs in tooth morphogenesis and opens a new window for understanding the regulatory mechanism of PG-mediated signaling cascades during tooth formation.

Fam20c is essential for the normal mineralization of dentin and bone. The generation of odontoblast and osteoblast cell lines carrying floxed Fam20c allele can offer valuable tools for the study of the roles of Fam20c in the mineralization of dentin and bone. The limited capability of the primary odontoblasts and osteoblasts to proliferate necessitates the development of odontoblast and osteoblast cell lines serving as substitutes for the study of differentiation and mineralization of the odontoblasts and osteoblasts. In this study, we established and characterized immortalized mouse floxed Fam20c dental papilla mesenchymal and osteoblast cell lines. The isolated primary mouse floxed Fam20c dental papilla mesenchymal cells and osteoblasts were immortalized by the infection of lentivirus containing Simian Virus 40 T-antigen (SV40 T-Ag). The immortalization of floxed Fam20c dental papilla mesenchymal cells and osteoblasts was verified by the long-term passages and genomic integration of SV40 T-Ag. The immortalized floxed Fam20c dental papilla mesenchymal and osteoblast cell lines not only proliferated at a high rate and retained the morphology of their primary counterparts, but also preserved the dentin and bone specific gene expression as the primary dental papilla mesenchymal cells and osteoblasts did. Consistently, the capability of the primary floxed Fam20c dental papilla mesenchymal cells and osteoblasts to mineralize was also inherited by the immortalized dental papilla mesenchymal and osteoblast cell lines. Thus, we have successfully generated the immortalized mouse floxed Fam20c dental papilla mesenchymal and osteoblast cell lines.

Tooth is made of crown and root. It is widely believed that dentin formation in crown and root uses the same regulatory mechanism. However, identification of nuclear factor 1 C (NFIC)'s unique function in determining root but not crown dentin formation challenges the old thinking. In searching for the target molecules downstream of NFIC, we unexpectedly found a sharp reduction of osterix (OSX), the key transcription factor in skeleton formation, in the Nfic knockout (Nfic-KO) tooth root. We then demonstrated a dose-dependent increase of Osx in the odontoblast cell line due to a transient transfection of Nfic expression plasmid. Studies of global and conditional Osx-KO mice revealed no apparent changes in the crown dentin tubules and dentin matrix. However, the OSX conditional KO (cKO) mice (crossed to the 2.3-kb collagen type 1 [Col1]-Cre) displayed an increase in cell proliferation but great decreases in expressions of root dentin matrix proteins (dentin matrix protein 1 [DMP1] and dentin sialophosphoprotein [DSPP]), leading to an inhibition in odontoblast differentiation, and short, thin root dentin with few dentin tubules. Compared to the Nfic-KO tooth, which contains essentially no dentin tubules and remains in a “root-less” status at adult stages, the Osx-cKO root phenotype had partially improved at the late stage, indicating that other factors can compensate for OSX function. Thus, we conclude that OSX, one of the key downstream molecules of NFIC, plays a critical role in root, but not crown, formation. © 2014 American Society for Bone and Mineral Research.

Our previous studies have demonstrated that Fam20C promotes differentiation and mineralization of odontoblasts, ameloblasts, osteoblasts and osteocytes during tooth and bone development. Ablation of the Fam20C gene inhibits bone and tooth growth by increasing fibroblast growth factor 23 in serum and causing hypophosphatemia in conditional knockout mice. However, control and regulation of the expression of Fam20C are still unknown. In this study, we generated a transgenic reporter model which expresses green fluorescence protein (GFP) driven by the Fam20C promoter. Recombineering was used to insert a 16 kb fragment of the mouse Fam20C gene (containing the 15 kb promoter and 1.1 kb of exon 1) into a pBluescript SK vector with the topaz variant of GFP and a bovine growth hormone polyadenylation sequence. GFP expression was subsequently evaluated by histomorphometry on cryosections from E14 to adult mice. Fluorescence was evident in the bone and teeth as early as E17.5. The GFP signal was maintained stably in odontoblasts and osteoblasts until 4 weeks after birth. The expression of GFP was significantly reduced in teeth, alveolar bone and muscle by 8 weeks of age. We also observed colocalization of the GFP signal with the Fam20C antibody in postnatal 1- and 7-day-old animals. Successful generation of Fam20C-GFP transgenic mice will provide a unique model for studying Fam20C gene expression and the biological function of this gene during odontogenesis and osteogenesis.

Objective The bone morphogenetic proteins (BMPs) play crucial roles in tooth development. However, several BMPs retain expression in the dentin of the fully patterned and differentiated tooth. We hypothesized that BMP signaling therefore plays a role in the function of the differentiated odontoblast, the job of which is to lay down and mineralize the dentin matrix. Design We generated mice deficient in Bmp2 and 4 using a dentin matrix protein 1 (Dmp1) promoter-driven cre recombinase that was expressed in differentiated odontoblasts. Results The first and second molars of these Bmp2 and Bmp4 double conditional knockout (DcKO) mice displayed reduced dentin and enlarged pulp chambers compared to cre-negative littermate controls. DcKO mouse dentin in first molars was characterized by small, disorganized dentinal fibers, a wider predentin layer, and reduced expression of dentin sialophosphoprotein (DSPP), dentin matrix protein 1 (DMP1), and bone sialoprotein (BSP). DcKO mouse odontoblasts demonstrated increased type I collagen mRNA production, indicating that the loss of BMP signaling altered the rate of collagen gene expression in these cells. Bmp2 and Bmp4 single Dmp1-cre knockout mice displayed no discernable dentin phenotype. Conclusions These data demonstrate that BMP signaling in differentiated odontoblasts is necessary for proper dentin production in mature teeth.