Search

Yue-Rong Zhang,1 Hui Wang,2 Ning Zhou,2 Yao-Di Zhang,1,2 Yan Lin,1,2 Li-Yang Wu,1,2 Shi-Fang Wei,2 Yan-Yun Ma,2,3 Chun-Xia Wang3 1Department of Gastroenterology, University-Town Hospital of Chongqing Medical University, Chongqing, People’s Republic of China; 2Department of Infectious Diseases, The First People’s Hospital of Lanzhou, Gansu, 730050, People’s Republic of China; 3Department of Laboratory, The First People’s Hospital of Lanzhou, Gansu, 730050, People’s Republic of ChinaCorrespondence: Yue-Rong ZhangDepartment of Gastroenterology, University-Town Hospital of Chongqing Medical University, No. 55 University Town Middle Road, Shapingba District, Chongqing, 401331, People’s Republic of ChinaTel/Fax +86 102365714142Email zhang_yue_rong@163.comObjective: To explore the feasibility of treating cirrhosis using a multidisciplinary team approach (MDT) and to pinpoint the key factors influencing its implementation.Methods: The data of 307 patients with decompensated cirrhosis were studied retrospectively. Patients who received more than two treatment measures were assigned to the MDT group (n=228), and patients who received symptomatic medical drug treatment only were assigned to the traditional treatment group (n=79). The follow-up period ranged from 4 to 10 years, and the average follow-up period was 5.7 years. The results of the biochemical tests for hepatitis B virus deoxyribonucleic acid, hepatitis C virus ribonucleic acid, and autoantibodies to liver disease were analyzed.Results: The differences in gender and Child–Pugh grade of liver function between the two groups were not statistically significant. The MDT group had obvious advantages over the traditional treatment group in occupational composition, etiology composition, 5-year survival rate and annual hospitalization times. The leading causes of death in the MDT group, in descending order, were liver cancer, infection, mesenteric thrombosis, and non-hepatic disease, and, in the medical treatment group, they were liver failure, gastrointestinal bleeding, infection, and liver cancer. There was a significant statistical difference between the two groups (p < 0.05). In the multidisciplinary treatment, etiological treatment was the most widely used treatment, accounting for 79.8%, followed by endoscopic treatment (33.3%), peritoneal drainage and ascites reinfusion (25%), splenectomy combined with devascularization (11.4%) and stem cell transplantation and liver transplantation (1.8%).Conclusion: An MDT can improve the efficacy and prognosis of patients with cirrhosis and improve patient compliance. After multi-disciplinary intervention, the mortality spectrum of long-term survival patients with cirrhosis changes, and the mortality rate of liver cancer and non-liver disease increases.Keywords: liver cirrhosis, decompensated period, multidisciplinary team mode, traditional treatment, retrospective study

A new Mg–10%Al–1%Zn–1%Si alloy with non-dendritic microstructure was prepared by strain induced melt activation (SIMA) process. The effect of compression ratio on the evolution of semisolid microstructure of the experimental alloy was investigated. The results indicate that the average size of α-Mg grains decreases and spheroidizing tendency becomes more obvious with the compression ratios increasing from 0 to 40%. In addition, the eutectic Mg2Si phase in the Mg–10%Al–1%Zn–1%Si alloy transforms completely from the initial fishbone shape to globular shape by SIMA process. With the increasing of compression ratio, the morphology and average size of Mg2Si phases do not change obviously. The morphology modification mechanism of Mg2Si phase in Mg–10%Al–1%Zn– 1%Si alloy by SIMA process was also studied.

This article reports on the evolution of breakdance. Given the inclusion of breakdancing in the 2024 Olympic Games in Paris, France, scholars have generated substantial international research related to breakdance teaching in recent years. However, few researchers have focused on the impact of formal formative assessment on breakdance teachers’ teaching and students’ learning. We wish to contribute to the quality of breakdance teaching and learning by identifying the positive impact of recent research on formative assessment on student learning and designing a formal formative assessment task related to breakdance. This article lays out a framework of formal formative assessment tasks and identifies the positive impact of formative assessment on dance education. Although our work is far from perfect, it does provide a general methodological framework for assessing breakdance students’ abilities in formal educational settings.

With continuous increases in the amount and duration of plastic film used, the residual film in farmland soil is accumulated and tended to be fragmented, which affects soil water infiltration. We carried out an experiment of one-dimensional vertical infiltration of soil moisture. We examined the effects of different residual film density and area on soil water cumulative infiltration under 21 experimental treatments with 5 residual film area levels (0.25, 0.5, 1, 2, 8 cm随着地膜使用量和年限的不断增加,残膜在农田土壤中不断累积并趋于破碎化,影响土壤水分的入渗过程。本研究采用室内土壤水分一维垂直入渗试验,通过设置5个残膜面积水平(0.25、0.5、1、2、8 cm

FSP was applied to the as-cast Al-12.7Si alloy at a traverse speed of 150mm/min and different rotation speeds (700rpm to 1000rpm). The coarse α-Al dendrites and eutectic Si phase can be refined by friction stir process. After FSP, Si particles are homogeneously distributed in the Al matrix with equaixed grains. Tool rotation speed has an effect on the microstructure and mechanical properties of the Al-12.7Si alloy. The size of Si particles decreases and that of the Al matrix grains increases with increase of the rotation speed. The microhardness values of the stir zone increase with increase of rotation speed. With rotation speed increases, the ultimate tensile strength is slightly increased and the elongation is greatly improved.

Species of the spider family Leptonetidae Simon, 1890 from China are revised based on molecular and morphological data analyses. A new genus, Jingneta Wang & Li gen. nov ., is erected, with Leptoneta cornea Tong & Li, 2008 as the type species. Twenty-two Chinese species previously assigned to the genus Leptoneta Simon, 1872 are revised, with eight transferred to Falcileptoneta Komatsu, 1970 , seven transferred to Jingneta gen. nov ., five transferred to Leptonetela Kratochvil, 1978, and one species each transferred to Longileptoneta Seo, 2015 and Masirana Kishida, 1942. Eight new species are described: i.e., Falcileptoneta shuanglong Wang & Li sp. nov . (♂), Jingneta caoxian Wang & Li sp. nov . (♂♀), J. jingdong Wang & Li sp. nov . (♂♀), Longileptoneta gutan Wang & Li sp. nov . (♂♀), L. huangshan Wang & Li sp. nov . (♂♀), L. shenxian Wang & Li sp. nov . (♂♀), L. yeren Wang & Li sp. nov . (♂), and L. zhuxian Wang & Li sp. nov . (♂♀). In total, 127 leptonetid species from six genera are documented from China: nine species of Falcileptoneta, nine species of Jingneta gen. nov ., 101 species of Leptonetela, six species of Longileptoneta, one species of Masirana, and one species of Rhyssoleptoneta Tong & Li, 2007 .

Root hair, a special type of tubular-shaped cell, outgrows from the root epidermal cell and plays important roles in the acquisition of nutrients and water, as well as interactions with biotic and abiotic stresses. Studies in the model plant Arabidopsis have revealed that root-hair initiation and elongation are hierarchically regulated by a group of basic helix-loop-helix (bHLH) transcription factors (TFs). However, knowledge regarding the regulatory pathways of these bHLH TFs in controlling root hair growth remains limited. In this study, RNA-seq analysis was conducted to profile the transcriptome in the elongating maize root hair and >1000 genes with preferential expression in root hair were identified. A consensus cis-element previously featured as the potential bHLH-TF binding sites was present in the regulatory regions for the majority of the root hair-preferentially expressed genes. In addition, an individual change in ZmLRL5, the highest-expressed bHLH-TF in maize root hair resulted in a dramatic reduction in the elongation of root hair, and rendered the growth of root hair hypersensitive to translational inhibition. Moreover, RNA-seq, yeast-one-hybrid and ribosome profile analysis suggested that ZmLRL5 may function as a key player in orchestrating the translational process by directly regulating the expression of translational processes/ribosomal genes during maize root hair growth.

Ramie is a kind of natural fibers, it requires degumming process before it can be used as a raw material for various applications. The traditional treatment uses alkali, which is not an environmentally friendly process. In this paper, ramie fibers are degummed using sodium percarbonate, which causes no any negative environmental problems, and its decomposition, hydrogen peroxide, is a clear liquid, it can be used as an oxidizer, bleaching agent and antiseptics for surface treatment of ramie fibers. Effect of temperature and concentration of sodium percarbonate on the degumming process are studied theoretically and verified experimentally. Finally an optimal degumming process is suggested for maximal weight ratio of degummed ramie fiber to raw bast.

To investigate the effects of the "inverted U method" Nd:YAG laser posterior capsulotomy on anterior segment parameters, decentration and tilt of intraocular lens (IOLs) and visual acuity in posterior capsular opacification (PCO) patients after combined phaco-vitrectomy.Seventy-six patients (76 eyes) were enrolled in this study, who were diagnosed as PCO and underwent "inverted U method" Nd:YAG laser posterior capsulotomy. All patients had undergone previous combined phaco-vitrectomy for rhegmatogenous retinal detachment. The parameters including IOL decentration, angle of IOL tilt, anterior chamber angle (ACA), anterior chamber depth (ACD), anterior chamber volume (ACV), central corneal thickness (CCT), keratometry, pupil size, axial length (AL), intraocular pressure (IOP), refractive status, corrected distance visual acuity (CDVA), objective scattering index (OSI) and Chinese version of Visual Function 14 (VF-14) index were obtained before and 3 months after capsulotomy.After capsulotomy, the tilt angle and decentration of the IOLs at both vertical (tilt:The "inverted U method" Nd: YAG laser posterior capsulotomy decreases tilt and decentration of the IOL, increases ACA and causes no change in ACD, ACV, CCT and IOP in patients after phaco-vitrectomy. These changes make a decrease in cylindrical error and a myopic shift in spherical error. Laser capsulotomy significantly improves visual acuity.

Resembling the role of disease diagnosis in Western medicine, pathogenesis (also called Bing Ji) diagnosis is one of the utmost important tasks in traditional Chinese medicine (TCM). In TCM theory, pathogenesis is a complex system composed of a group of interrelated factors, which is highly consistent with the character of systems science (SS). In this paper, we introduce a heuristic definition called pathogenesis network (PN) to represent pathogenesis in the form of the directed graph. Accordingly, a computational method of pathogenesis diagnosis, called network differentiation (ND), is proposed by integrating the holism principle in SS. ND consists of three stages. The first stage is to generate all possible diagnoses by Cartesian Product operated on specified prior knowledge corresponding to the input symptoms. The second stage is to screen the validated diagnoses by holism principle. The third stage is to pick out the clinical diagnosis by physician-computer interaction. Some theorems are stated and proved for the further optimization of ND in this paper. We conducted simulation experiments on 100 clinical cases. The experimental results show that our proposed method has an excellent capability to fit the holistic thinking in the process of physician inference.

Background Clinical evidence indicates that genetic variations may interfere with the mechanism of drug action. Recently, it has been reported that the single nucleotide polymorphisms (SNPs) of STAT4, PTPN2, PSORS1C1 and TRAF3IP2RA genes are associated with the clinical efficacy of tumor necrosis factor (TNF) inhibitors in the treatment of rheumatoid arthritis (RA) patients. Therefore, the detection of the SNPs linked with TNF inhibitor efficacy may provide an important basis for the treatment of RA. This study intended to establish molecular diagnostic methods for genotyping the linked SNPs based on high resolution melting (HRM) curve analysis. Methods The polymerase chain reaction-HRM (PCR-HRM) curve analysis detecting systems were established by designing the primers of the four SNPs, rs7574865G>T, rs7234029A>G, rs2233945C>A and rs33980500C>T, and the performance and clinical applicability of which were evaluated by using the Sanger sequencing method and genotyping test for 208 clinical samples. Results The self-developed molecular diagnostic methods of PCR-HRM were confirmed to be able to correctly genotype the four SNPs, the sensitivity and specificity of which were 100% in this study. The repeatability and reproducibility tests showed that there is little variable in intra-assay and inter-assay (the coefficient of variation ranged from 0.01% to 0.07%). The slight changes of DNA template and primer concentrations, PCR cycle number and reaction system volume had no significant effect on the genotyping performance of the method. The PCR-HRM assays were also applied to other PCR thermocyclers with HRM function and use different saturation fluorescent dyes. Conclusions The PCR-HRM genotyping method established in this study can be applied to the routine molecular diagnosis of rs7574865, rs7234029, rs2233945 and rs33980500.

Extreme environments, such as subterranean habitats, are suspected to be responsible for morphologically inseparable cryptic or sibling species and can bias biodiversity assessment. A DNA barcode is a short, standardized DNA sequence used for taxonomic purposes and has the potential to lessen the challenges presented by a biotic inventory. Here, we investigate the diversity of the genus Leptonetela Kratochvil, 1978 that is endemic to karst systems in Eurasia using DNA barcoding. We analyzed 624 specimens using one mitochondrial gene fragment (COI). The results show that DNA barcoding is an efficient and rapid species identification method in this genus. DNA barcoding gap and automatic barcode gap discovery (ABGD) analyses indicated the existence of 90 species, a result consistent with previous taxonomic hypotheses, and supported the existence of extreme male pedipalpal tibial spine and median apophysis polymorphism in Leptonetela species, with direct implications for the taxonomy of the group and its diversity. Based on the molecular and morphological evidence, we delimit and diagnose 90 Leptonetela species, including the type species Leptonetela kanellisi (Deeleman-Reinhold, 1971). Forty-six of them are previously undescribed. The female of Leptonetela zhai Wang & Li, 2011 is reported for the first time. Leptonetela tianxinensis (Tong & Li, 2008) comb. nov. is transferred from the genus Leptoneta Simon, 1872; the genus Guineta Lin & Li, 2010 syn. nov. is a junior synonym of Leptonetela; Leptonetela gigachela (Lin & Li, 2010) comb. nov. is transferred from Guineta. The genus Sinoneta Lin & Li, 2010 syn. nov. is a junior synonym of Leptonetela; Leptonetela notabilis (Lin & Li, 2010) comb. nov. and Leptonetela sexdigiti (Lin & Li, 2010) comb. nov. are transferred from Sinoneta; Leptonetela sanchahe Wang & Li nom. nov. is proposed as a replacement name for Sinoneta palmata (Chen et al., 2010) because Leptonetela palmata is preoccupied.

The vomerovaginal canal (VVC) and palatovaginal canal (PVC) are two canals that open forward to the posterior wall of the pterygopalatine fossa (PPF). Although the anatomy and computed tomography (CT) appearances of the PVC have been well studied, the VVC has been rarely reported, especially in endoscopic examinations. Some studies have even failed to distinguish the PVC from the VVC on CT images. The purpose of this study was to demonstrate the anatomy of the VVC on endoscopy and reveal its differences from the PVC, and to analyse the relative positions of the VVC, PVC, and pterygoid canal on CT images. Ten dry skull bases were studied to observe the structures involved in the formation of the VVC. Dissection of four cadaveric heads was performed to demonstrate the anatomy of the VVC on endoscopy. Coronal CT image analysis in 70 patients was conducted to evaluate the distances and relative positions between the VVC, PVC, and pterygoid canal. The PVC and VVC were also compared on axial CT images. The osteological study showed the top wall of the VVC was the antero-inferior wall of the sphenoid sinus. The VVC may be a helpful landmark in endoscopic endonasal transpterygoid approaches. Steps and discrimination in the dissections of the VVC and PVC were described. The interval between the PVC and VVC could be observed on both coronal and axial CT images. The coronal CT images of patients showed differences in the positions and distances among the three canals at both the anterior and posterior apertures of the PVC. The VVC can be easily mistaken for the PVC if its existence is not suspected. The anatomical morphologies and trajectories of the VVC and PVC differed on both nasal endoscopy and CT. The existence of the VVC should be considered during surgery and CT diagnosis within this area.

Background The aim of this study was to determine the association between hypertriglyceridemia and hyperuricemia (HUA). Methods The study was conducted in 3884 subjects who had not received medication enrolled as a baseline. Each participant received at least three annual health check-ups between 2011 and 2017. The risk of hyperuricemia was assessed in four Quartiles (Q1 to Q4) according to TG levels using multivariate-adjusted logistic regression models. Results The total incidence rate of HUA was 62.3/1000 person-years. In the univariate analysis, the risk of hyperuricemia in people with hypertriglyceridemia was 2.353 times that of normal triglycerides, with a 95% confidence interval of (2.011, 2.754), and the risk of hyperuricemia in men was 1.86 times of female, and the 95% confidence interval is (1.634, 2.177). After adjusting the potential confounders, the relative risk RR of TG at Q2 Q3 Q4 was 1.445 (95%CI:1.114, 1.901), 2.075 (1.611, 2.674), 2.972 (2.322, 3.804). Conclusions TG is an independent risk factor for hyperuricemia. As the level of TG increases, the risk of HUA increases.

Due to their unique properties, nanofibers have been widely used in various areas, for example, information industry, pharmaceutical application, environmental industry, textile and clothing, etc. Bubble electrospinning is one of the most important non-needle electrospinning methods for nanofiber fabrication. It usually uses polymer bubbles for the production of nanomaterials by using electrostatic force, flowing air or mechanical force to overcome the surface tension of bubbles. Bubble electrospinning mainly includes bubble electrospinning and blown bubble electrospinning. History of the development of bubble electrospinning is briefly introduced in this article, and the most promising patents on the technology are elucidated. The methods of bubble electrospinning are single bubble electrospinning, porous bubble electrospinning, blown bubble electrospinning, electrostatic-fieldassisted blown bubble spinning and others. These different bubble electrospinning methods are also discussed in this paper.

Background For patients with chronic hepatitis B and cirrhosis in less developed western regions in China, due to constraints of local economic conditions, the choice of treatment measures is often limited. However if patients recieved valid management and effective treatment, they were able to maintain their health and benign prognosis. Case presentation This study narrates the long-term treatment and careful follow-up of a patient with chronic hepatitis B and cirrhosis in a less developed western region in China, and analyzes the prognosis of the disease and countermeasures. Conclusions This would partly reflect the development of antiviral therapy for chronic hepatitis B and multidisciplinary comprehensive treatment for cirrhosis-related complications in remote region with limited resources in the past 20 years.

Aluminium metal matrix composites reinforced with WC ceramic particles were manufactured through warm accumulative roll bonding (ARB) in this study. The microstructures of the composites exhibited excellent particles distribution in the matrices. Compared with the mechanical properties of ARB monolithic pure Al, the Al/WC composites exhibited higher tensile strength. The shear lag theory modified was used in considering the yield strength of the composites. The results indicated that the effects of WC particles in Al/WC composite lead to the thermal expansion dislocation strengthening, small subgrain strengthening, Orowan strengthening and geometrically necessary dispersion strengthening.

Objective To explore the usefulness of highly sensitive nucleic acid detection for assisting with the accurate antiviral treatment of patients with cirrhosis that was caused by hepatitis. Methods There were 377 patients with hepatitis B with cirrhosis and 119 patients with hepatitis C with cirrhosis, either as hospitalized patients and outpatients, who were enrolled into the study. Among them, 299 were men and 197 were women between 23 and 82 years of age. All patients were examined using a domestic HBV DNA/HCV RNA test, which was negative in 162 cirrhosis with hepatitis B and 54 cirrhosis with hepatitis C patients (HBV DNA/HCV RNA Results For patients with hepatitis C with cirrhosis, after the antiviral therapy, ALT, HCV RNA, and Child–Pugh grade were significantly improved compared with before treatment. ROC analysis results showed that an ALT level of 29 IU/mL was the most sensitive cutoff value to judge a positive HBV DNA load (sensitivity 1.0, specificity 0.237, Youden index 0.763). Conclusion Precise detection for patients with cirrhosis caused by hepatitis is required for accurate therapy.

Fluorescent probes with the binding selectivity to specific structures in DNAs or RNAs have gained much attention as useful tools for the study of nucleic acid functions. Here, chloro-substituted 2-amino-5,7-dimethyl-1,8-naphthyridine (ClNaph) was developed as a strong and highly selective binder for target orphan cytosine opposite an abasic (AP) site in the DNA duplexes. ClNaph was then conjugated with thiazole orange (TO) via an alkyl spacer (ClNaph&ndash, TO) to design a light-up probe for the detection of cytosine-related mutations in target DNA. In addition, we found the useful binding and fluorescence signaling of the ClNaph&ndash, TO conjugate to target C in AP site-containing DNA/RNA hybrid duplexes with a view toward sequence analysis of microRNAs.

The aim of the present study was to understand the possible role of the Dihydromyricetin (DHM) in Alzheimer’s disease (AD) rat model through regulation of the AMPK/SIRT1 signaling pathway. Rats were divided into Sham group, AD group, AD + DHM (100 mg/kg) group and AD + DHM (200 mg/kg) group. The spatial learning and memory abilities of rats were assessed by Morris Water Maze. Then, the inflammatory cytokines expressions were determined by radioimmunoassay while expressions of AMPK/SIRT1 pathway-related proteins by Western blot; and the apoptosis of hippocampal cells was detected by TdT-mediated dUTP nick end labeling assay. AD rats had an extended escape latency with decreases in the number of platform crossings, the target quadrant residence time, as well as swimming speed, and the inflammatory cytokines in serum and hippocampus were significantly elevated but AMPK/SIRT1 pathway-related proteins were reduced. Meanwhile, the apoptosis of hippocampal cells was significantly up-regulated with decreased Bcl-2 and increased Bax, as compared with Sham rats (all P

MicroRNA-24 (miR-24) serves an important role in cell proliferation, migration and inflammation in various types of disease. In the present study, the biological function and molecular mechanism of miR‑24 was investigated in association with the progression of age‑associated cataracts. To the best of our knowledge the present study is the first to report that the expression of miR‑24 was significantly increased in human anterior lens capsules affected by age‑associated cataracts as well as lens epithelial cells (LECs) exposed to oxidative stress. Overexpression of miR‑24 induced p53 expression and p53 was verified as a direct target of miR‑24. Overexpression of miR‑24 enhanced LEC death by directly targeting p53. The present study revealed that oxidative stress induced the upregulation of miR‑24 and enhanced LEC death by directly targeting p53. These results suggest that the miR‑24‑p53 signaling pathway is involved in a novel mechanism of age‑associated cataractogenesis and miR‑24 may be a useful therapeutic target for age-associated cataracts.

Background To explore the perioperative nursing in flexible ureteroscopy and holmium laser lithotripsy. Methods All 128 patients underwent flexible ureteroscopy and holmium laser lithotripsy was gave the preoperative psychological nursing, health guidance, the nursing of postoperative complications, health education and the follow-up intervention to prevent recurrence of stones. Results One hundred twenty-one cases out of 128 (94.5%) had stone clearance post operation. No serious complication occurred except one case of hematuria and one case of urinary tract infection. The D-J tubes were in their right place. The average post operation hospital stay was 2.5 days. Conclusions Effective perioperative care can improve the surgery effect, decrease the complications of surgery, shorten hospital stay and enhance patient satisfaction.

For the needs of laser autocollimator in image acquisition and processing, designed the hardware circuit based on FPGA and DSP as the control core, detailed the system hardware composition. Image sensor initialization and configuration were elaborated, cached the image data by double buffering technique. By reading the cache data, pretreatment, spot extraction, calculating barycentric coordinates and data fitting, the high precision of angle measurement was obtained. The system design is reasonable, the hardware circuit is reliable, and the video capture image is clear. The functionality of image acquisition and processing is achieved.

AIM: To detect the expression of miR-211 in age-related cataract tissue, explore the effects of miR-211 on lens epithelial cell proliferation and apoptosis, and identify its target gene. METHODS: This study used real-time quantitative polymerase chain reaction (RT-qPCR) to measure the expression of miR-211 and its predicted target gene [silent mating-type information regulation 2 homolog 1 (SIRT1)] in 46 anterior lens capsules collected from age-related cataract patients. Human lens epithelial cell line (SRA01/04) cells were transfected with either miR-211 mimics, mimic controls, miR-211 inhibitors or inhibitor controls, 72h after transfection, miRNA and protein expression of SIRT1 were measured using RT-qPCR and Western blotting; then cells were exposed to 200 μmol/L H2O2 for 1h, whereupon cell viability was measured by MTS assay, caspase-3 assay was performed. Dual luciferase reporter assay was performed to verify the relationship between miR-211 of SIRT1. RESULTS: Compared to the control group, expression of miR-211 was significantly increased (P

Aim at lower heating efficiency problem of furnace, the spatial cycle heating principle was brought forward and the testifying device was designed and fabricated. After the traditional heating principle was abstracted, modeled, narrated and analyzed, the obvious defect of lower heating efficiency was pointed out and analyzed in theory. The spatial cycle heating model was put forward to improve heating efficiency. And then different expressions aim at given models were deduced and compared. In theory, it was gained that the spatial cycle heating mode had a higher heating efficiency than traditional heating mode. Then a testifying experiment device was designed and constructed in terms of spatial cycle heating principle. PLC controller was employed to realize the closed-loop feedback control. Water temperature was the output of PLC control system. Temperature sensor was used to sample output and then to feedback to PLC controller. Heating resistors were considered as actuators. Furthermore, touch screen was also employed to control PLC controller and to dynamically display the water temperature. Experiment and its analytic results well demonstrated that the spatial cycle heating model could further improve the heating efficiency. Namely, spatial cycle heating principle is correct and effective and available for improving heating efficiency in furnace. It is very suitable for massive heating case such as winter heating.

Co-pyrolysis characteristics of low rank coal (LRC) and enteromorpha (EN) in different proportins were studied in a dry distillation equipment. The results show that he maximum tar yiled of blends was 11.39% with a EN ration of 30%, which increased by 28.61% compared to LRC pyrolysis alone. In the co-pyrolysis tar ,the alkanes’ content was 48.66% and the phenolic was 9.12%, which was significantly higher than the content of the corresponding components of the original tar. The H/C ratio was increased by 9.87%. It indicated the pyrolysis tar became lighter on some degree. While the contents of CH4and H2in the pyrolysis gas were increased. SEM analysis showed the surface of co-pyrolysis semi-coke became rough and formed obvious center cracks. The heat value of co-pyrolysis semi-coke was higher than that of semi-coke from LRC.

By employing the electrospinning technique and subsequent carbonization processes, porous carbon/nickle (C/Ni) composite nanofibers with diameters of 100-200 nm were successfully prepared. Two polymer solutions of polyacrylonitrile (PAN), polyvinyl pyrrolidone (PVP), and Ni (CH3COOH)2(Ni (OAc)2) were used as C/Ni composite nanofiber precursors. The study revealed that C/Ni composite nanofibers were successfully prepared and nickle particles with diameters of 20-70 nm were uniformly scattered in the carbon nanofibers. It was also observed that the fiber with clear fibrous morphology with particles broke into shorter fibers after sinter. X-ray diffraction (XRD) showed that these particles crystallized with the face centered cubic (FCC) structure. The Brunauer-Emmett-Teller (BET) analysis indicated that C/Ni composites nanofibers with meso-pores possessed larger specific surface area than that of carbon nanofibers.

In order to improve grinding efficiency and achieve low-power operation, this paper presents the design of main drive gear. Under the premise of ensuring the gear strength, using a large teeth and a small modulus extend the life of the big gear, reduce costs to the optimal economic benefit. Gear layouts with optimization method and the design of the drive part meet the requirements of energy saving, high efficiency, low noise, safety and reliability, with certain application values.

The deformation behavior of DC cast Al-2Si and Al-15Si alloys have been studied by means of compression test at temperature range of 300-500°C and strain rate range of 0.01-5 s-1. The results show that the flow stress of the Al-Si alloys increases with decreasing compression temperature and increasing strain rate. The flow curves determined from the compression tests exhibit that the deformation of the materials is controlled by two competing mechanisms: strain hardening and flow softening. Higher silicon content in the alloys also leads to higher flow stress during deformation and tend to show more significant flow softening. Particle damage during the deformation may have an influence on the flow curves of the alloys.