Search

Abstract Pickering multiphase systems stabilized by solid particles have recently attracted increasing attention due to their excellent stability. Among various solid stabilizers, natural and renewable cellulosic micro/nanoparticles that are derived from agricultural and forestry sources have become promising candidates for Pickering stabilization due to their unique morphological features and tunable surface properties. In this review, recent progress on forming and stabilizing Pickering multiphase systems using cellulosic colloidal particles is summarized, including the physicochemical factors affecting their assembly at the interfaces and the preparation methods suitable for producing Pickering emulsions. In addition, relevant application prospects of corresponding Pickering multiphase materials are outlined. Finally, current challenges and future perspectives of such renewable Pickering multiphase systems are presented. This review aims to encourage the utilization of cellulosic micro/nanoparticles as key components in the development of Pickering systems, leading to enhanced performance and unique functionalities.

With the worldwide attention on decreasing carbon dioxide (CO2) emissions, carbon capture and storage (CCS) is utilized to stop CO2 from escaping into the atmosphere. Selecting appropriate materials is crucial for the establishment of a dependable and secure carbon capture and storage technology infrastructure. The natural cellulose materials possess inherent characteristics such as eco-friendliness, high utility, remarkable physical and mechanical properties, which make them particularly available for CCS. In the field of carbon capture, utilization and sequestration technologies, cellulose-based materials can be used as adsorbents for CO2 capture and as catalyst carriers for CO2 conversion. Firstly, the application of cellulose-based materials in carbon capture and conversion is introduced. Secondly, the research progress of cellulose-based films, aerogels and solid adsorbents in the field of carbon capture are summarized. Subsequently, the research mechanisms of cellulose-based materials for the conversion of CO2 to methanol format, carbonate and CO are also described in detail. Finally, the challenges and the key problems of cellulose-based materials in carbon capture and utilization are described.

Abstract Supercapacitors exhibit considerable potential as energy storage devices due to their high power density, fast charging and discharging abilities, long cycle life, and eco‐friendliness. With the increasing environmental concerns associated with synthetic compounds, the use of environment friendly biopolymers to replace conventional petroleum‐based materials has been widely studied. Biomass‐based materials are biodegradable, renewable, environment friendly and non‐toxic. The unique hierarchical nanostructure, excellent mechanical properties and hydrophilicity allow them to be used to create functional conductive materials with precisely controlled structures and different properties. In this review, the latest development of biomass‐based supercapacitor materials is reviewed and discussed. This paper describes the physical and chemical properties of various biopolymers and their impact on supercapacitors, as well as the classification and basic principles of supercapacitors. Then, a comprehensive discussion is presented on the utilization of biomass‐based materials in supercapacitors and their recent applications across a range of supercapacitor devices. Finally, an overview of the future prospects and challenges pertaining to the utilization of biomass‐based materials in supercapacitors is provided.

Highlights Hyperelastic and superlight multifunctional MXene/nanocellulose composite aerogels with high conductivity are designed by constructing biomimetic texture. The MXene/nanocellulose aerogels as flexible pressure sensors exhibit appealing linear sensitivity performance (817.3 kPa−1). The as-prepared compressible supercapacitor with MXene/nanocellulose electrodes reveals superior electrochemical performance (849.2 mF cm−2 at 0.8 mA cm−2).

Apigenin-7-O-glucoside (AG), a flavonoid glycoside, has been shown in vitro anti-inflammatory activities. To date, the mechanism of AG against colitis has not been reported. In this study, we investigated the role of AG in relieving colitis and explored its potential mechanisms in dextran sulfate sodium (DSS)-induced colitis mice. The results indicated oral administration of AG increased colon length and improved colonic histopathology. Besides, it dramatically restored the colonic expression of pro-inflammatory and anti-inflammatory mediators, as well as enhanced the expression of intestinal barrier markers such as ZO-1, occludin, claudin-1, and claudin-3. The mitogen-activated protein kinases (MAPKs) including ERK, JNK, and p38 were significantly inhibited. Moreover, 16S rDNA sequencing revealed that AG improved the abundance of Akkermansia, and reduced that of Bacteroides and Desulfovibrio. Taken together, AG supplementation relieved DSS-induced colitis by protecting the intestinal barrier, inhibiting the MAPK pathway, and modulating gut microbiota, which indicated that AG may be a good candidate therapeutic compound for sustaining gut health to lower the risk of colitis.

Abstract Cellulose nanopaper has shown great potential in diverse fields including optoelectronic devices, food packaging, biomedical application, and so forth, owing to their various advantages such as good flexibility, tunable light transmittance, high thermal stability, low thermal expansion coefficient, and superior mechanical properties. Herein, recent progress on the fabrication and applications of cellulose nanopaper is summarized and discussed based on the analyses of the latest studies. We begin with a brief introduction of the three types of nanocellulose: cellulose nanocrystals, cellulose nanofibrils and bacterial cellulose, recapitulating their differences in preparation and properties. Then, the main preparation methods of cellulose nanopaper including filtration method and casting method as well as the newly developed technology are systematically elaborated and compared. Furthermore, the advanced applications of cellulose nanopaper including energy storage, electronic devices, water treatment, and high-performance packaging materials were highlighted. Finally, the prospects and ongoing challenges of cellulose nanopaper were summarized.

Hemicellulose-based hydrogels are three-dimensional networked hydrophilic polymer with high water retention, good biocompatibility, and mechanical properties, which have attracted much attention in the field of soft materials. Herein, recent advances and developments in hemicellulose-based hydrogels were reviewed. The preparation method, formation mechanism and properties of hemicellulose-based hydrogels were introduced from the aspects of chemical cross-linking and physical cross-linking. The differences of different initiation systems such as light, enzymes, microwave radiation, and glow discharge electrolytic plasma were summarized. The advanced applications and developments of hemicellulose-based hydrogels in the fields of controlled drug release, wound dressings, high-efficiency adsorption, and sensors were summarized. Finally, the challenges faced in the field of hemicellulose-based hydrogels were summarized and prospected.

With the emerging of the problems of environmental pollution and energy crisis, the development of high-efficiency energy storage technology and green renewable energy is imminent. Supercapacitors have drawn great attention in wearable electronics because of their good performance and portability. Electrodes are the key to fabricate high-performance supercapacitors with good electrochemical properties and flexibility. As a biomass based derived material, nanocellulose has potential application prospects in supercapacitor electrode materials due to its biodegradability, high mechanical strength, strong chemical reactivity, and good mechanical flexibility. In this review, the research progress of nanocellulose/two dimensional nanomaterials composites is summarized for supercapacitors in recent years. First, nanocellulose/MXene composites for supercapacitors are reviewed. Then, nanocellulose/graphene composites for supercapacitors are comprehensively elaborated. Finally, we also introduce the current challenges and development potential of nanocellulose/two dimensional nanomaterials composites in supercapacitors.

Flavonoid aglycones possess biological activities, such as antioxidant and antidiabetic activities compared to glycosides. Taxifolin, a flavonoid aglycones, is detected only in trace amounts in nature and is not easily observed. Therefore, in this study, to investigate the hair tonic and hair loss inhibitors effect of taxifolin, high content of taxifolin aglycone extract was prepared by enzymatic hydrolysis. Taxifolin effectively regulates the apoptosis of dermal papilla cells, which is associated with hair loss, based on its strong antioxidant activities. However, inhibition of dihydrotestosterone (DHT), which is a major cause of male pattern hair loss, was significantly reduced with taxifolin treatment compared with minoxidil, as a positive control. It was also confirmed that a representative factor for promoting hair growth, IGF-1, was significantly increased, and that TGF-β1, a representative biomarker for hair loss, was significantly reduced with taxifolin treatment. These results suggest that taxifolin from enzymatic hydrolysis of RM is a potential treatment for hair loss and a hair growth enhancer.

This study was aimed to examine the antiapoptotic effect of Ulmus davidiana extracts through regulation of the intracellular cation mobilization in U937 human monocytic cells. To investigate the modulatory effects on lipopolysaccharide-induced apoptosis and the Ca2+ signaling pathway, we measured the levels of intracellular Ca2+ and various protein markers such as Bax, Bcl-2, and PARP. To isolate biopotent molecules, the branches of U. davidiana were processed sequentially using 60% ethanol, supercritical fluid extraction, and ethyl acetate extraction of the remaining samples to obtain single fractions and catechin-glycoside, which is one of the known bioeffector molecules of U. davidiana. Lipopolysaccharide increased intracellular Ca2+ mobilization in U937 cells by inducing transient oscillations and markedly increased Bax and PARP protein expression and decreased Bcl-2 expression. All U. davidiana and catechin-glycoside significantly reduced lipopolysaccharide-induced intracellular Ca2+ mobilization and downregulated apoptosis-related molecules. These results suggest that U. davidiana and catechin-glycoside may be useful for improving immune system function.

As a global environmental problem, plastic pollution has attracted worldwide attention. Plastic wastes not only disrupt ecosystems and biodiversity, but they also threaten human life and health. Countries around the world have enacted regulations in recent years to limit the use of plastics. Paper products have been proposed as promising substitutes for plastics, which undoubtedly brings unprecedented opportunities to the pulp and paper industry. However, paper products have some deficiencies in replacing certain plastic products. Research and development to improve paper properties and reduce production costs is needed to meet such challenges.

Tailoring the structure and properties of lignin is an important step toward electrochemical applications. In this study, lignin/polypyrrole (PPy) composite electrode films with microporous and mesoporous structures were designed effectively by electrostatic spinning, carbonization, and in situ polymerization methods. The lignin can not only reduce the cost of carbon fiber but also increase the specific surface area of composite films due to the removal of carbonyl and phenolic functional groups of lignin during carbonization. Besides, the compact three-dimensional (3D) conductive network structures were constructed with PPy particles densely coated on the lignin nanofibers, which was helpful to improve the conductivity and fast electron transfer during the charging and discharging processes. The synthesized lignin carbon fibers/PPy anode materials had good electrochemical performance in 1 M H2SO4 electrolyte. The results showed that, at a current density of 1 A g−1, the lignin carbon nanofibers/PPy (LCNFs/PPy) had a larger specific capacitance of 213.7 F g−1 than carbon nanofibers (CNFs), lignin carbon nanofibers (LCNFs), and lignin/PPy fiber (LPAN/PPy). In addition, the specific surface area of LCNFs/PPy reached 872.60 m2 g−1 and the average pore size decreased to 2.50 nm after being coated by PPy. Therefore, the independent non-binder and self-supporting conductive film is expected to be a promising electrode material for supercapacitors with high performance.

The kinetics studies is of great importance for the understanding of the mechanism of hemicellulose pyrolysis and expanding the applications of hemicellulose. In the past years, rapid progress has been paid on the kinetics studies of hemicellulose hydrolysis. In this article, we first introduced the hydrolysis of hemicelluloses via various strategies such as autohydrolysis, dilute acid hydrolysis, catalytic hydrolysis, and enzymatic hydrolysis. Then, the history of kinetic models during hemicellulose hydrolysis was summarized. Special attention was paid to the oligosaccharides as intermediates or substrates, acid as catalyst, and thermogravimetric as analyzer method during the hemicellulose hydrolysis. Furthermore, the problems and suggestions of kinetic models during hemicellulose hydrolysis was provided. It expected that this article will favor the understanding of the mechanism of hemicellulose pyrolysis.

This paper reviews the preparation of magnetic biochar and its application in wastewater treatment, and briefly discusses the adsorption mechanism of biochar to remove pollutants and the modification methods of biochar. Due to the good physical and chemical properties of biochar, including its rough porous structure, it has been widely used to absorb pollutants from water. Magnetic biochar is commonly prepared by combining biochar with magnetic material. The biochar is endowed with the characteristics of the magnetic material, which could effectively solve the problems of difficult recovery and easy loss of adsorbent in water treatment. Magnetic biochar with high carbon content, large specific surface area, magnetic separation, and other excellent properties, has become a hot research topic in recent years. The preparation methods and application properties of magnetic biochar are reviewed. The future research directions of magnetic biochar are put forward to provide directions for further research and application of magnetic biochar materials.

Lignin exhibited numerous advantages such as plentiful functional groups, good biocompatibility, low toxicity, and high carbon content, which can be transformed into composites and carbon materials. Lignin-based materials are usually environmentally friendly and low cost, and are widely used in energy storage, environment, electronic devices, and other fields. In this review article, the pretreatment separation methods like hydrothermal process are illustrated briefly, and the properties and categories of technical lignin are introduced. Then, the latest progress of lignin-based composites and lignin-derived carbon materials is summarized. Finally, the current challenges and future developments were suggested based on our knowledge. It is expected that this review paper favored the applications of composites and lignin-derived carbon materials in the future.

Paris polyphylla var. yunnanensis is a kind of biomass resource, which has important medicinal and economical values with a huge market. This review article aims to summarize the recent development of biomass P. polyphylla var. yunnanensis. The genetic diversity and chemical components of biomass P. polyphylla var. yunnanensis were reviewed based on the literature. Both the genetic diversity and genetic structure of biomass P. polyphylla var. yunnanensis were compared by using molecular marker technologies. All the extraction processes, harvest time, and drying methods on the chemical components were summarized in detail. The differences of arbuscular mycorrhizal fungi on the infection rate, diosgenin content, microorganisms, enzyme activities, rhizospheric environment, and endogenous hormones were discussed. This review article is beneficial for the applications of biomass P. polyphylla var. yunnanensis as a biomass resource in the biomedical field.

Alnus sibirica Fisch. ex Turcz (ASFT), belonging to the family of Betulaceae, grows naturally in Asia, Europe, and America. The aims of this study are determining the efficacy of various biomarkers related to hair loss, evaluated by extracting the branch with 60% alcohol, and purely separating diarylheptanoid oregonin, an indicator and active substance, from 60% alcohol extract of the tree. To determine the preventive effects on hair loss, we investigated the anti-oxidative and anti-apoptotic effects on hydrogen peroxide-induced cytotoxicity on human hair dermal papilla cells using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and Western blotting analysis for proving of apoptosis-related marker alteration, respectively. Moreover, we examined the ameliorative effects of 60% alcohol extract of the tree and oregonin against changes of oxidative stress-induced cytokine and testosterone-induced dihydrotestosterone production as crucial pathways of the hair loss mechanism. These results suggest that 60% alcohol extract of the tree and oregonin were available as novel natural materials for maintaining hair health in mammals.

Hemicellulose is an important component of plant cell walls, which is mainly used in biofuels and bioproducts. The hemicellulose extracted from different plant sources and plant locations has different microstructure and molecule. Wheat straw is an important biomass raw material for the extraction of hemicellulose. The aims of this review are to summary the recent developments and various applications of hemicellulose from wheat straw. The microstructure and molecule of hemicellulose extracted by different methods are comparably discussed. The hemicellulose-based derivatives and composites are also reviewed. Special attention was paid to the applications of hemicellulose such as biofuel production, packaging field, and adsorbent. The problems and developing direction were given based on our knowledge. We expect that this review will put forward to the development and high-value applications of hemicellulose from wheat straw.

As a kind of biomass waste, enzymatic hydrolysis residues (EHRs) are conventionally burned or just discarded, resulting in environmental pollution and low economic benefits. In this study, EHRs of corncob residues (CCR) were used to produce high lignin-containing cellulose nanofibrils (LCNFs) and lignin nanoparticles (LNPs) through a facile approach. The LCNFs and LNPs with controllable chemical compositions and properties were produced by tuning the enzymolysis time of CCR and the followed homogenization. The morphology, thermal stability, chemical and crystalline structure, and dispersibility of the resultant LCNFs and LNPs were further comprehensively investigated. This work not only promotes the production of lignocellulose-based nanomaterials but also provides a promising utilization pathway for EHRs.

As a natural and the most abundant material, wood was used as a scaffold for the grafting of acrylonitrile (AN) and ethyl acrylate (EA) to develop a novel grafted wood. Thus, chemical modification of the wood was carried out by means of grafting. It is clear from the characterization techniques (FTIR, SEM, and XRD) that grafting of acrylonitrile (AN) and ethyl acrylate (EA) was successfully performed on the Pinus roxburghii wood. Monomer and initiator concentration, temperature, time, and pH parameters have been varied to obtain the maximum percent grafting yield. A significant influence was observed on the physicochemical properties, morphological structure, and bacterial resistant nature after the graft copolymerization of AN + EA on the raw wood. This approach of grafting of wood would lead to the construction of a new class of materials with better properties and will also promote innovative consumption of renewable wood.

In this work, lignin fractionation is proposed as an effective approach to reduce the heterogeneity of lignin and improve the adsorption and recycle performances of lignin as a cationic dye adsorbent. By stepwise dissolution of enzymatic hydrolysis lignin in 95% and 80% ethanol solutions, three lignin subdivisions (95% ethanol-soluble subdivision, 80% ethanol-soluble subdivision, and 80% ethanol-insoluble subdivision) were obtained. The three lignin subdivisions were characterized by gel permeation chromatography (GPC), FTIR, 2D-NMR and scanning electron microscopy (SEM), and their adsorption capacities for methylene blue were compared. The results showed that the 80% ethanol-insoluble subdivision exhibited the highest adsorption capacity and its value (396.85 mg/g) was over 0.4 times higher than that of the unfractionated lignin (281.54 mg/g). The increased adsorption capacity was caused by the enhancement of both specific surface area and negative Zeta potential. The maximum monolayer adsorption capacity of 80% ethanol-insoluble subdivision by adsorption kinetics and isotherm studies was found to be 431.1 mg/g, which was much higher than most of reported lignin-based adsorbents. Moreover, the 80% ethanol-insoluble subdivision had much higher regeneration yield (over 90% after 5 recycles) compared with the other two subdivisions. Consequently, the proposed fractionation method is proved to be a novel and efficient non-chemical modification approach that significantly improves adsorption capacity and recyclability of lignin.

The recent strategies in preparation of cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs) were described. CNCs and CNFs are two types of nanocelluloses (NCs), and they possess various superior properties, such as large specific surface area, high tensile strength and stiffness, low density, and low thermal expansion coefficient. Due to various applications in biomedical engineering, food, sensor, packaging, and so on, there are many studies conducted on CNCs and CNFs. In this review, various methods of preparation of CNCs and CNFs are summarized, including mechanical, chemical, and biological methods. The methods of pretreatment of cellulose are described in view of the benefits to fibrillation.

The process of cooking with solid alkali is a novel and efficient technology. In the present work, milled wood lignin (MWL) and water-soluble milled wood lignin (WMWL) were used as the raw materials to research their properties when cooking with MgO and active oxygen. Before and after cooking, the lignin content of the samples was estimated using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), heteronuclear single-quantum coherence-nuclear magnetic resonance (HSQC-NMR), and gel permeation chromatography (GPC). The results showed that the properties of the MWL and WMWL were different. The G unit and A′ structure in WMWL were more easily degraded than that in the MWL, where the G unit could be oxidized into a novel G′ unit. The D structure in the MWL with a weak signal could be thoroughly degraded, and the P structure was only present in WMWL and could be generated during the cooking process.

Steam explosion pretreatment of wheat straw can solubilize a significant portion of the hemicellulosic component and enhance the enzymatic digestibility of the remaining cellulose for fermentation into ethanol. In this work, wheat straw was pretreated by steam explosion using different steam temperatures and retention times, and the chemical compositions of the raw and steam-exploded wheat straw were analyzed. Results showed that the content of hemicellulose decreased sharply at higher steam temperatures and longer retention times; however, the content of lignin changed inconspicuously. After pretreatment, the characteristics of the straw fiber were investigated by studying their proportion of microfibrils, SEM, and FTIR. To assess the differences among various pretreatment parameters, the concentration of the reducing sugar and glucose conversion were determined. The highest reducing sugar concentration and glucose conversion were achieved at the explosion conditions of a pretreatment temperature of 220 ºC and a residence time of 3 min.

Panax ginseng has high medicinal and health values. However, the various and complex components of ginseng may interact with each other, thus reducing and even reversing therapeutic effects. In this study, we designed and fabricated a novel “nano-ginseng” with definite ingredients, ginsenoside Rb1/protopanaxadiol nanoparticles (Rb1/PPD NPs), completely based on the protopanaxadiol-type extracts. The optimized nano-formulations demonstrated an appropriate size (~110 nm), high drug loading efficiency (~96.8%) and capacity (~27.9 wt %), long half-time in systemic circulation (nine-fold longer than free PPD), better antitumor effects in vitro and in vivo, higher accumulation at the tumor site and reduced damage to normal tissues. Importantly, this process of “nano-ginseng” production is a simple, scalable, green economy process.

For the first time, a pale amorphous coumarin derivative, 5-methoxyl aesculetin (MOA), was isolated from the dried bark of Fraxinus rhynchophylla Hance (Oleaceae). MOA modulates cytokine expression in lipopolysaccharide (LPS)-treated RAW 264.7 macrophages, but the precise mechanisms are still not fully understood. We determined the effects of MOA on the production of inflammatory mediators and pro-inflammatory cytokines in the LPS-induced inflammatory responses of RAW 264.7 macrophages. MOA significantly inhibited the LPS-induced production of nitric oxide (NO), prostaglandin E2 (PGE2), tumor necrosis factor-α (TNF-α), interleukin-6, and interleukin-1β. It also effectively attenuated inducible nitric oxide (NO) synthase, cyclooxygenase-2, and TNF-α mRNA expression and significantly decreased the levels of intracellular reactive oxygen species. It inhibited phosphorylation of the extracellular signal-regulated kinase (ERK1/2), thus blocking nuclear translocation of activation protein (AP)-1. In a molecular docking study, MOA was shown to target the binding site of ERK via the formation of three hydrogen bonds with two residues of the kinase, which is sufficient for the inhibition of ERK. These results suggest that the anti-inflammatory effects of MOA in RAW 264.7 macrophages derive from its ability to block both the activation of mitogen-activated protein kinases (MAPKs) and one of their downstream transcription factors, activator protein-1 (AP-1). Our observations support the need for further research into MOA as a promising therapeutic agent in inflammatory diseases.

Lignin is the main component of plant cell walls, conferring upon lignocellulosic biomass both excellent mechanical and barrier properties. At the same time, the considerable number of unsaturated groups and conjugated structures present in lignin render it a promising candidate for applications in the optical domain. In recent years, the development of the optical properties of lignin and lignin-derived optical materials has paved the way for a novel avenue of lignin valorization. This review is concerned with the mechanisms of lignin-derived optical materials, with particular emphasis on the physical and chemical structures that are linked to their optical performance, including UV absorption, photothermal conversion, and photoluminescence. Additionally, the potential applications of these materials in energy storage, bioimaging, structural materials, and photonic crystal are also presented, demonstrating the unique optical properties of lignin. Finally, the challenges and future directions of lignin as an optical material are presented, with the objective of developing lignin into a polymer biobased raw material that can serve advanced emerging industries. [ABSTRACT FROM AUTHOR]