Search

The paper adopts modified carbon fiber with Meldrum's acid and silane coupling agent (KH-550), then add the modified carbon fiber to the paper based friction materials. The paper aims to explore the changes of modified carbon fiber in its surface structure and properties by electron microscopy and infrared spectral analysis, and the effect of anionic microparticle forming retention aid system comprised of lithium soapstone-cationic polyacrylamide (CPAM) on mechanical properties and retention of paper based friction materials. Compared with the addition of unmodified carbon fiber to paper based friction materials, the addition of modified carbon fiber with Meldrum's acid, silane coupling agent, Meldrum's acid and silane coupling agent enhance the tensile strength of paper based friction materials. The tensile index of paper based friction materials was separately enhanced by 64.87 %, 91.38 % and 28.88 %. Compared with the paper based friction materials without the anionic microparticle forming retention aid system, the basis weight of paper based friction materials increased by 13.97 %.

By changing ther factors of synthesis process of PAE, discussed the effects of synthetic conditions on the PAE curing, and through electron microscope analysis methods, the curing mechanism of PAE is preliminary discussed.When the ratio of DTEA/AA was 1:1.05,the dry and wet strength of paper before and after curing achieved the best value.when the dosage of p-toluene sulfonic acid is 1.5%, the PAE can achieve best effect.the best ratio of PPC and epichlorohydrin is 1:0.7.

This paper mainly discuss the effect of beating on OCC pulp fiber morphology and paper physical Strength. After the treatment with PFI, the beating degree were ranged from 25 ° SR rises from 56 °SR, the fiber morphologies were greatly changed, and appeared splitting and brooming. Physical results showed that beating can improve strength properties of OCC pulp in the proper degree, 46°SR was the best result in this study.

In this experiment, we use corn starch as the main raw material and use Mid-Temperature a-amylase to modifie it. The influnce of temperature and time to viscosity of the enzymatic starch were discussed. In this way, we can get the optimal conditions about enzymatic modification. According to testing properties of the paper ,we know about its surface sizing effect. At last,we explored the influnce of AKD to surface sizing. The results showed that the optimal conditions are as follows: the optimal enzyme reaction temperature of 65 °C and the ptimal enzyme reaction time of 20min under the condition that the substrate concentration of 20%, the dosage of enzyme of 0.02%, the dosage of calcium chloride of 0.04%, pH 6, gelatinization temperature of 95 °C, and gelatinization concentration of 10%.Under this condition, the viscosity of starch paste is 11mPas. Compared with original paper, sizing increased by 16.20%, burst index increased by 10.50%, tensile index increased by 12.60%. The AKD can significantly improve the degree of sizing, compared with the original paper, the degree of sizing increased by 26.5%.

Based on the domestic OCC pulp as raw material, it was found that the optimum conditions for laccase treatment were: the concentration of laccase 16U/g dry pulp, the pulp consistency 5%, temperature 50 °C, pH=5.0 and reaction time 90min. OCC treated with laccase alone can improve paper strength properties. The dry tensile index and wet tensile index of the control sample were 21.80 Nm/g and 0.22 Nm/g, respectively. The dry tensile index and wet tensile index after OCC treated with laccase alone were 23.36 Nm/g and 0.28 Nm /g. Comparing to the control pulp, the dry tensile index and wet tensile index of OCC treated with laccase were increased by 6.88% and 27.3%, respectively. At the same time, the laccase system can obviously improve the strength of the pulp properties with adding the mediator, especially using histidine, the dry and wet strength of paper was largely improved.

In this study, we prepared unbleached chemi-mechanical pulp from waste poplar wood using alkaline processing under normal atmospheric pressure. The influnce of alkaline dosage and time to fiber morphology and properties of the paper were discussed. The parameters of fiber including the length ,width and curl index were measured by FQA. The optimal dosage of NaOH and the optimal time of soaking period in the preparation of pulp using waste poplar wood were studied. The results showed that the optimal dosage of NaOH was 6% and the time of soaking period was one day. The performance of the handsheet made from the poplar wood under the pulping conditions are as follows: tensile strength index of 27 N·m/g, tear index of 0.51 mN·m2/g, burst index of 1.7 KPa·m2/g, folding strength of 16 times, ring crush strength index of 5.7 N.m/g, whiteness of 55.5 ISO, white opacity of 97%, paper absorption liquid rate of 0.32 mm/s.

With the development of world's paper industry, strength agent has become increasingly wide spread and more important.This paper describes a method for modified APMP with Chitosan, we make studies on using chitson to improve the properties of paper, and compare the effect of them based on experimential results. As a result of study,it can be concluded: The pH value and the dosage of chitosan have a great influence on the physical strength of paper.When the pH was 6 and the dosage of chitosan was 1%,the tensile index of paper could reach 30% above.

By the preceding experiments, we concluded that the optimum conditions for laccase treatment were: the concentration of laccase 16U/g dry pulp, the pulp consistency 5%, temperature 50 °C, pH=5.0 and reaction time 90min. We studied the change of water retention value and carboxyl content changes under the best conditions. As well as we studied the effect of pulp strength properties by biological treatment combined with mechanical treatment. Moreover, environmental scanning microscope images showed that more collapse and more fibrillation were observed on the beating combined with laccasehistidine-treated fiber surface than the control samples, which led to form better bonding between fibers in handsheets resulting in the increase of the paper strength of beating combined with laccasehistidine-treated OCC pulp.

initiator is one of the most important conditions of synthesizing efficient strength agent CPAM. To begin with initiating mechanism, three redox systems of acrylamide aqueous polymerization (NH4)2S2O8/ Na2 SO3, K2S2O8/NaHSO3 and K2S2O8/Na2 S2O4 have been studied. The effects of different kinds of initiator, initiator concentration, and monomer concentration as well as polymerization temperature on relative molecular weight and strength effects of CPAM have been investigated. K2S2O8/Na2 SO3 is the most useful system in synthesizing efficient strength agents.

Aluminium silicate fiber is an excellent high-temperature material which is widely used in special paper industry in recent years. Due to its property of hardly interweave into the paper and the low strength of the single inorganic fibers paper, it is difficult to make a general basis weight paper. In response to these issues, the strength of the paper was improved by adding some plant fibers. This study takes advantage of good resistance to high temperature of inorganic adhesive and bonding capacity of organic intensifier. Meanwhile two inorganic adhesives (waterglass and ludox) and one organic adhesives carboxymethy starch (CMS) were used in the process of preparing the aluminium silicate paper. The physical properties and insulation properties of the paper which prepared from the difference conditions were studied. The experiment results showed that the adhesive of waterglass and ludox can improve the properties of resistant to high temperature. The adding dosages were 10% and 7.5ml, respectively. The best ratio of alumina silicate fiber to conifier fiber is 7 to 3.The using of CMS can decrease the amount of the plant fiber and its best usage is 10%.

The stickies in pulp and paper machinery especially in the blankets will cause a lot of problems such as paper defects, increasing the time of machine shut down . Therefore, Inhibiting the Stickies of blanket is very important to regular production. In this study,we mainly studied on the inhibition of Stickies in the blanket with enzyme. The processed blanket was treated by several kinds of enzymes. The results showed that the optimum enzyme treatment conditions were obtained as followings:PH of 7, temperature of 50°C, 2×104U/g of cellulose enzyme, 2×103U/g of amylase and 104U/g of lipase. The blankets obtained better cleaning situation under this conditions.

A kind of refractory fiber cardboard functioning as building insulation materials was developed. To improve the cardboard abilities to bear high temperature, sepiolite and alumino-silicate fibers were chosen as the raw materials for making refractory fiber carboard. In addition, inorganic adhesives and PVA fiber were used as bonding agents to enhance the physical strength of cardboard. The effect of bonding agents amount on tensile strength of the cardboard were investigated. When choosing inorganic adhesives and PVA fibers as the adhesives, the optimum condition is that amount of aluminum sol and PVA fibers is 30%and 3%-4% by weight, respectively; The best technical conditions for making the refractory fiber cardboard were determined. When the mass ratio of alumino-silicate fibers, sepiolite fiber, PVA fibers is 90: 6: 4, the physical strength of refractory fiber cardboard can be up to 1.556N·m/g. When the bulk density of the cardboard is 305.8kg/m3, the thermal conductivity of insulation cardboard at 200°C is very low, which is only 0.065W/m·K.

Because of the public environmental awareness growing and Fibrous raw material shortage, waste paper recycling has received widespread attention, increased year by year. Waste paper fiber through the whole process of pulping and papermaking, different production processes and the use of environment, waste paper fiber can occur in many different changes compared with the original fiber, accordingly the paper properties change.In this study, a high-quality aspen high-yield pulp (HYP) was used to improve the Waste paper pulp properties at the laboratory scale.The results indicate that adding 25% aspen HYP into unrefined or refined Waste paper fiber can minimize many of the drawbacks associated with Waste paper fiber: improving its drainage, bulk, and opacity. And addition of a small amount (about 1%) of cationicstarch can also significantly increase the tensile index of OCC.

Impregnated paper for plywood formwork is an important material for the production of plywood formwork. It was developing with plywood formwork and the market had been expanding. Absorption and wet strength are main factors which can effects on the property of impregnated paper. In this paper, mechanical chemical pulp and waste paper were used to make special impregnated paper for formwork. The ratio of EMP, dosage of aid, and operation conditions were discussed. The result showed that the absorption was improved by increasing ratio of EMP, adding agent, drying quickly, and lighter pressure. A certain ratio of AOCC is necessary to ensure strength. The paper also discussed the difference of white spot between bamboo plywood formwork and plywood formwork which indicated that white spot caused by waste paper .However, it wasn’t damage the quality of structures.

The aims of prehydrolysis are mainly removing pentose and decreasing viscosity in the preparation process of dissolving pulp. In this paper, the effect of prehydrolysis in the preparation process of poplar and bamboo dissolving pulp were investigated under different prehydrolysis conditions. The optimum prehydrolysis process conditions of poplar were obtained as followings: the liquid ratio of 1:6, the highest temperature of 160±2°C, heating time of 90min, holding time of 120min, H2SO4 of 1.0%, the P-factor was 1537. Under this condition, the results showed that the content of pentosan decreased from 24.10% to 7.85%. The optimum prehydrolysis process conditions of bamboo were obtained as followings: the liquid ratio of 1:8, the highest temperature of 160±2°C, heating time of 90min, holding time of 120min, H2SO4 of 1.0%, the P-factor was 1549.And the content of pentosan was also decreased from 19.64% to 6.76% by the prehydrolysis process.

In this paper, we studied the possibility of wood powder in place of mechanical pulp in paper making to get high bulkness, also the dry-bleaching method of wood powder, the strength enhancement and retention effect for wood powder during paper making were all introduced and analyzed in detail.

In this study, the high density 900kg/m3 biodegradable cellulose fiber composites have been successfully manufacture from treated cellulose fiber by wet-hot pressure technology. The cellulose fiber was treated with cationic guar gum(CGG) by the process of adsorption. It was found that the composite made from treated cellulose fibers have better mechanical properties such as the tensile properties and stiffness. Chemical groups of samples were studied through the use of FTIR spectroscopy.

Sepiolite has good adsorptivity due to their high surface area and structural channels. During the process of making aluminium silicate fiber paper, inorganic binders retaintion was little because of the smooth surface of aluminium silicate fibers. In this study, sepiolite was used to improve tensile strength of the sheet by increasing inorganic binders retaintion rate through its high adsorptivity. The effect of sepiolite on the tensile strength of alimunium silicate fiber paper was investigated. The results showed that the best mass ratio of aluminium silicate fibers to spiolite was 7:3. Under this condition, the tensile strength of the sheet was 4.79 N•m/g, which increased by 24.2% from the one without sepiolite.

The effect of flotation parameters such as flotation consistency, temperature, flotation time, air to pulp ratio, and velocity of pulp flow (turbulence level) on OMG/MOW deinking efficiency was studied by using a high-consistency laboratory pulper and a laboratory deinking cell. The optimized flotation conditions were: flotation consistency 1.1%, 40°C, 8min, air to pulp ratio 40%, velocity of pulp flow 3.5m/s and pH 9.0. By using the optimized flotation conditions, the deinked pulp brightness could reach 70.56%ISO, 11.78%ISO higher than that of the control, the effective residual ink concentration was 108.46 mg/kg, which less than 378.14mg/kg of the control, theoretic deinking efficiency was up to 88.41%.

In this paper, we proposed the method to synthesize the modified polyamide polyamine enhancer, which takes PAE, styrene and acrylic as raw materials. Factors that would affect the preparation of the modified polyamide polyamine enhancer, such as monomer amount, reaction time, initiator amount and emulsion concentration, were discussed in detail. Experimental results showed that the modified polyamide polyamine enhancer achieved optimum effect the strength of tube roll base paper under the conditions: the amount of acrylic is 6%, the ratio of styrene and PAE is 2:1, holding time 4h, and the amount of initiator 0.7%. The modified polyamide polyamine enhancer applied to tube roll base paper. The optimum amount of modified polyamide enhancer was 1%. The ring crush strength of paper prepared in this condition can be increased by 44% and the stiffness can be increased by 46%.

PAE as the wet strength agent has a long history; it not only has the wet strength performance and the retention and drainage characteristics. This paper focuses on the technological conditions of preparation of PAE wet-strength agent and the application conditions. The results showed that the well PPC was obtained under the following conditions: the mole ratio of adipic acid and diethylenetriamine were 1:1.05, the amount of catalyst (mole ratio of the total raw materials) was 1%, the temperature of heat preservation was 165°C and the reaction time was 4h. The optimum condition of preparing PAE was obtained as followings: the ratio of EPI to PPC of 1.2:1, the epoxidation temperature of 60°C and reaction time of 2h. While applied in softwood pulp, when the dosage of PAE was 1%, the wet strength agent provided the satisfactory effect.

Hand towel is one kind of disposable tissue paper which has characteristic of soaking up water quickly and lower cost. It becomes increasingly popularity in families, at work, and public places. There are many kinds of raw materials to produce hand towel according to its level. Some researches showed that bleached chemical pulp could be partially used to the production of hand towel and some other household paper. In this study, some kinds of raw material which be used to produce hand towel were analyzed and trying to looking for new one. Poplar Extruding Mechanical Pulp (EMP) had characteristics of long fiber, high level of strength and brightness. Different ratio of poplar EMP and certain Bleached Kraft Pulp were tested to make hand towel. The effects of poplar EMP on whiteness, tensile strength, bulkiness, absorbability were discussed. The results showed that characteristic targets of hand towel made from poplar EMP and Bleached Kraft Pulp met the quality requirements of GBT22455-2009 and satisfied the high-end hand towel. The new hand towel had lower cost, higher stiffness and higher bulkiness. It was feasible from the technique and economy point.

In this study, birch xylan was deposited onto elementally chlorine free (ECF) bleached eucalyptus kraft pulp, and the corresponding changes in physical properties were determined. An aqueous 5% birch xylan solution at pH 9 was added to 5 wt% slurry of bleached kraft eucalyptus fibers, with stirring at 70 °C for 15 min after which the pH was adjusted to 5–6. The xylan enriched fibers were isolated by filtration and used for physical testing. A 1.15 wt% adsorption of birch xylan on the kraft fibers at 8% xylan addition increased the tensile index, strain and tensile energy absorption values by ∼10%, while the burst index increased by 20.15%. The tear index increased by 2.55% with the adsorption of 0.87 wt% birch xylan on the eucalyptus kraft pulp at 3% xylan addition. The pulp beatability was also improved by adding birch xylan. The surface morphology of the unmodified and modified pulp samples were analyzed using atomic force microscopy (AFM) in the tapping mode. The analysis revealed the differences in the fine structure of fibers which showed micrometer-sized xylan structures spreading over the fiber surfaces.

The effect of flotation parameters such as flotation consistency, temperature, flotation time, air to pulp ratio, velocity of pulp flow (turbulence level), and pH on old newspaper/old magazine deinking efficiency was studied by using a laboratory deinking cell developed by ourselves. The optimized flotation conditions were: flotation consistency 1.2%, 50°C, 6min, air to pulp ratio 50%, velocity of pulp flow 3.5m/s and pH 8.5. By using the optimized flotation conditions, the deinked pulp brightness could reach 59.15%ISO, 10.18%ISO higher than that of the control, the effective residual ink concentration was 234.65 mg/kg, which less heavily than 875.56 mg/kg of the control, theoretical deinking efficiency was up to 84.42%.

Rosin as a natural renewable resource has become an important research topic. The esterifiable rosin used to do the cation neutral sizing agent has the advantages of low dosage, good effect, and low demand for equipment. In this paper, the rosin esterification reaction temperature, reaction time had been made a detailed discussion. When the reaction temperature is 230°C, the reaction time is 6h, the dosage of ZnO (as the catalyst) is 0.2% (relative to the rosin), the acid value of rosin is the lowest, and the esterification has the most complete response. The emulsified rosin glyceride as the sizing was used in papermaking. The results showed that the sizing degree of paper was the highest when the dosage of sizing and Al2 (SO4)3 were both 1.5 %( relative to the dry pulp).

In this paper, a kind of sizing synergist,AKD,cationic rosin(CRS) and oil resistance agent were mixed in different proportions, we make it as a kind of new water repellent agent ,and for internal sizing. The best dosage and the composite ratio of the synergist, AKD, cationic rosin and oil resistance agent was discussed mainly in this experiment. And then the copy paper were tested of the substanceweight and contact angle, and compared with the water resistance when the domestic water repellent agent or AKD was added alone. Conclusions of this experiment are following: the optimal conditions were that the mass ratio of AKD and CRS is 6:4, the additive level of AKD and the cationic rosin is 6% (based on dry weight of pulp), the quantity of the sizing synergist is 0.5% , and no oil resistance agent was added, the effect of water resistance is best.

The residues from wheat straw pulping mainly include uncooked chips and fiber bundles. In order to achieve high quality pulp, the residues require removal from the system. It was not necessary that the residues were re-cooked because of its high contents of non-cellulosic constituent. The achievement of low density foamed buffer material with the residues of wheat straw pulping would make the second pollution problem of the residues be solved, and achieve a replacer of foamed plastic material. The paper discussed the producing techniques of foamed buffer material with the residues of wheat straw pulping. The result showed that the best foamed properties of the residues were achieved with proper dosage of natural bonding agent like wheat flour, inorganic foamed agent, crosslink agent, and proper foamed temperature. The density and compression of foamed buffer material with the residues of wheat straw pulping were achieved with 60 kg /m3 and 60 kPa respectively at the optimum foaming condition.

Environment management is of great consequence in the wheat straw pulping workshop. It contributes to the health of workers and prolongs the service life of mechanical and electric equipment. In this paper, reasons for waste liquor, waste steam, corrosive gas, foam were analyzed. Some special solutions were put forward.

The paper studied the possibility of using the whole stalk kenaf as a raw material for producing high yield and good quality bleachable pulp. The stem of kenaf has two distinct parts: the bast and the core. which have markedly different chemical components and fiber morphology. In general, the length of bast fiber ranges from about 2-2.5mm, while that of the core varies from about 0.5-0.8mm, so it is important to achieve a balance of the bast fiber and the core during pulping. The study indicated that using the selected continuous cooking conditions, the properties of kenaf pulp approached to the hardwood pulp and would be easily bleached.

In this paper, the effect of microwave treatment on the hydrogen peroxide bleaching of Soda-AQ wheat-straw pulp was investigated. The results showed that microwave treatment could increase the brightness of the hydrogen peroxide bleached pulp. The fiber coarseness of microwave enhancing peroxide bleached pulp was higher than that of the peroxide bleached pulp. However, the arithmetic average fiber length, the length weighted average fiber length and weight weighted average fiber length of the former was lower than that of the latter. Fourier transform infra-red spectroscopy (FTIR) and X-ray diffraction (XRD) spectra showed that CrI(%) crystallinity of microwave enhancing peroxide bleached pulp was similar as that of the peroxide bleached pulp but all higher than that of the Soda-AQ wheat-straw pulp. N·O′KI infra-red crystalline index of microwave enhancing peroxide bleached pulp were lower than that of the peroxide bleached pulp. The FTIR spectra of lignin showed that the microwave treatment had some influences on the methoxyl and phenolic group in lignin.

Traditional cast coated glossy photo paper production process due to its characteristics that the water evaporates from non-coated cast side, so the coating speed is slow, ground paper is non-waterproof paper, therefore the paper products are easy to transmutative, as the cast shows that the formation of dense coatings membrane, the lower ink absorption. To solve such the problems, a novel porous ink receiving layer constituted by a litter amount of a hydrophilic binder(PVA) and a cross-linking agent, a large amount of inorganic pigment(SiO2) and a hollow structural plastic pigment. In this paper, the effects of the hollow structural plastic pigment rheological properties of the color and the printing and preservation properties of ink jet paper were investigated. Because of the thermoplasticity of the plastic pigment the calendering and dry technology were also studied. From the viewpoint of water-fastness and preventing the penetration of binder, the resin coated paper(being so-called RC paper) is selected as the substrate.

In this paper, Water glass and sulfuric acid were used as raw materials to do the synthesis of hydrated silica by the method of precipitation, and then hydrated silica is applied in paper coating. By examining the changes of the coated paper’s various properties to study the effects of different reaction conditions to the final products. And then we obtained a optimal synthesis conditions: sulfuric acid concentration 25%, reaction time 50min, reaction temperature 80°C, sodium silicate modulus 2.8, stirring speed 150r/min, the relative amount of sodium sulfate content compared to SiO2 is 25% .And at last the outward appearance of the hydrated silica and the structural changes in paper coating were observed by scanning electron microscopy.

The preparation of alumina silicate refractory fiberboard by wet vacuum filter molding process, alumina silicate fibre is the matrix material, and high-temperature resistance adhesive is the agglutinant. Experiments made in conditions of no liquid glue, and not adding fiber, influence of cycling time on liquid glue concentration, density of fiberboard, and retention of cementing compound was studied; effect of density of fiberboard on thermal conductivity is also discussed. The results showed that the optimum liquid glue concentration is 9.41%, cycling time is 28h (replenish liquid glue after 28h). Density of alumina silicate fiberboard is 289kg/m3, and alumina silicate fiberboard can resistance to 1200 °C.

The effect of flotation parameters such as flotation consistency, temperature, flotation time, air to pulp ratio, and turbulence level (velocity of pulp flow) on old book paper deinking efficiency was studied by using a high-consistency laboratory pulper and a laboratory deinking cell. The optimized flotation conditions were: flotation consistency 1.2%, 50°C, 6min, air to pulp ratio 40%, velocity of pulp flow 5.0m/s. By using the optimized flotation conditions, the deinked pulp brightness could reach 77.01%ISO, 9.69%ISO higher than that of the control, the effective residual ink concentration was 175.26 mg/kg, which less than 437.84mg/kg of the control, deinking efficiency was up to 59.97%. After washing process, pulp brightness could reach 84.27%ISO, the effective residual ink concentration was 93.71 mg/kg, deinking efficiency was up to 78.60%.

More and more case boards were used in our society. Shade adjusting plays an important part in case board manufacturing. Tinting pigment can replace dyes used in color adjusting of paper making. Tinting pigment has the advantages of less dosage, better coverage, better stability and also lower cost. In this article, the shortages of dye used in adjusting color and the present situation of tinting pigment used in adjusting color were introduced. The factors of beating degree of soft wood, the additives of AKD, contact time and PH to the tinting pigment adjusting color were investigated also. The results showed that the effect of color adjusting was best when the beating degree of wood soft was 44°SR. AKD was good to color adjusting of pigment in papermaking. The best contact time of red pigment and yellow pigment choose 6 minutes. The best contact time of orange pigment choose 4 minutes. With the increasing of PH, the value of a* and b* improved first and then declined. The red pigment reached the maximum value when the PH was 5.5, while the yellow pigment and orange pigment reached the maximum value when the PH was 6. So the best PH of red pigment was 5.5. The best PH of yellow pigment and orange pigment were 6.

Wood powder is widely used in production of wood-plastic composite materials, paint, animal feed, etc. In this paper, shape features of wood powder were analyzed and its performance in papermaking was tested. Based on the theoretical basis of deposition technique and electrostatic attraction mechanism between cationic ion and anionic ion, wood powder was coated with carboxymethylcellulose. And, then, the charge reversal has occurred on the wood powder with aluminum sulfate and polyamide polyamine epichlorohydrin. Coated wood powder can be more easily adsorbed on the fiber due to anionic charge. The experimental results show that the papermaking performance of wood powder is improved by coating with carboxymethylcellulose. The wood powder can be used in papermaking by appending a certain percentage of bleached kraft pulp. The bulkiness of paper presents an increasing trend with the increasing of wood powder addition. However the tensile index of paper has a certain decreased. Its physical property is suited to usage.