Search

In response to the ICRP's amending the occupational exposure limit for the eye lens, the Institute of Nuclear Energy Research (INER) established the H p(3) calibration system for eye dose monitoring in Taiwan to accurately assess the dose received in the eye lens. INER employed the narrow-spectrum series radiation according to the ISO 4037 as the X-ray radiation qualities, and the measured half-value layer consistent with a 5% difference. The air kerma rate standard was determined by the self-made free air chamber, and through dose conversion coefficient referring to ISO 4037 to obtain the H p(3) on an ISO cylinder phantom. Furthermore, the calibration system was provided as the characteristics tests for DOSIRIS headset dosemeters. Finally, the H p(3) calibration system has been established in Taiwan, and it can be used to provide calibration services for eye lens dosemeters and be applied to the proficiency testing that will be held in 2023. [ABSTRACT FROM AUTHOR]

We compared the Monte Carlo evaluation and GafChromic MD-55 film experimental measurement of 188Re liquid-filled balloons in intravascular brachytherapy using two phantoms of 6 mm vascular diameter, a phantom of 4 mm vascular diameter and a phantom of 3 mm vascular diameter. A dose-evaluation interface program was developed and was shown to be capable of quickly providing information such as the necessary 188Re source irradiation time to deliver a prescribed dose. [Copyright &y& Elsevier]

The National Radiation Standard Laboratory of the Institute of Nuclear Energy Research (INER) designed and constructed an improved Attix style free-air ionisation chamber (FAC) for low-energy X-ray measurements. Clinically, X rays in this energy range are used in mammography radiology. This chamber is also used to perform air-kerma measurements. The original Attix two-sectional design was redesigned by INER using the piston design. The correction factors were determined experimentally for volume estimation, ion recombination and air attenuation. The aperture transmission, wall transmission, electron loss and photon scatter correction factors were determined using Monte Carlo calculations. INER established the Bureau International des Poids et Mesures (BIPM) X-ray beam code and performed a comparison of secondary standard air-kerma calibration factors for 10-50 kV low- energy X rays to verify the experimental accuracy and measurement consistency of the improved chamber. The INER-NMIJ/National Institute of Advanced Industrial Science and Technology (AIST) experimental results comparison using a transfer chamber yielded a difference <1.0% at the 95% confidence level in calibration factors. The overall uncertainty for the X-ray measurement in terms of air kerma was <0.6% at the 95% confidence level. These results indicated that the improved FAC is capable of serving as a primary standard as well as a trace standard in low-energy X-ray calibration services in Taiwan and even forming a basis for the future mammography X-ray air-kerma primary standard.

Intravascular brachytherapy (IVBT) has been recognised as a treatment modality for reducing coronary restenosis after angioplasty and stent-implantation procedures. For the treatment of in-stent restenosis using beta-emitter (188)Re, delivering adequate doses to the entire vessel wall is not possible without the potential of overdosing tissues. A method to measure the dose distribution, perturbation and percentage depth dose using plane-parallel and cylindrical tissue-equivalent phantoms has been developed. Good agreement was found between experimental results and Monte Carlo simulation performed using MCNP4C code. The dose given to the affected area in the vascular region for intravascular radiation treatment was 15-30 Gy. Dose inhomogeneity beyond the stent surface decreased significantly with increasing radial distance. In the region close to the stent outer surface (>0.5-mm radial distance), a dose reduction of 11-17% due to the stent was observed. However, the dose perturbations due to the physical properties of metallic stents were found to be significant in IVBT for in-stent restenosis by using measured dose profiles in phantoms. The method can provide accuracy in beta isotope in vivo dosimetry results for treatments involving short-range dose distributions and provide a relatively high-level spatial resolution for detection.