Search

Flanking genomic sequences refer to the DNA sequences flanking specific sites of known sequences in chromosome, which contain information such as candidate genes, transcriptional regulation, chromosome structure, and biosafety, and play an important role in genomics research. Flanking sequence acquisition technologies are mainly used in the cloning of regulatory sequences such as promoters and enhancers, identification of T-DNA or transposon insertion sites, chromosome walking, genome-wide gap filling, etc. It is an important means of structural genomics research and functional genomics research. It is applied in the identification of transgenic plants and animals and their safety management. With the development of molecular biology, many methods for obtaining flanking sequences have been established, including plasmid rescue, inverse PCR, ligation-mediated PCR, semi-random primer PCR, whole-genome resequencing etc. In this review, we summarize and compared different methods for acquiring flanking genomic sequence. The principles and research progress of each approach are discussed.

The nuclear fertility restorer gene Rf5 in HA-R9, originating from the wild sunflower species Helianthus annuus, is able to restore the widely used PET1 cytoplasmic male sterility in sunflowers. Previous mapping placed Rf5 at an interval of 5.8 cM on sunflower chromosome 13, distal to a rust resistance gene R 11 at a 1.6 cM genetic distance in an SSR map. In the present study, publicly available SNP markers were further mapped around Rf5 and R 11 using 192 F 2 individuals, reducing the Rf5 interval from 5.8 to 0.8 cM. Additional SNP markers were developed in the target region of the two genes from the whole-genome resequencing of HA-R9, a donor line carrying Rf5 and R 11 . Fine mapping using 3517 F 3 individuals placed Rf5 at a 0.00071 cM interval and the gene co-segregated with SNP marker S13_216392091. Similarly, fine mapping performed using 8795 F 3 individuals mapped R 11 at an interval of 0.00210 cM, co-segregating with two SNP markers, S13_225290789 and C13_181790141. Sequence analysis identified Rf5 as a pentatricopeptide repeat-encoding gene. The high-density map and diagnostic SNP markers developed in this study will accelerate the use of Rf5 and R 11 in sunflower breeding.

Phytophthora blight is one of the most serious diseases affecting melon (Cucumis melo) production. Due to the lack of highly resistant germplasms, the progress on disease-resistant research is slow. To understand the genetics of melon resistance to Phytophthora capsici, an F 2 population containing 498 individuals was developed by crossing susceptible line E31 to highly resistant line ZQK9. Genetic analysis indicated that the resistance in ZQK9 was controlled by a dominant gene, tentatively named MePhyto. Through bulked-segregant analysis (BSA-Seq) and chromosome walking techniques, the MePhyto gene was mapped to a 52.44 kb interval on chromosome 12. In this region, there were eight genes and their expression patterns were validated by qRT-PCR. Among them, one wall-associated receptor kinase (WAK) gene MELO3C002430 was significantly induced in ZQK9 after P. capsici inoculation, but not in E31. Based on the non-synonymous mutation site in MELO3C002430, a cleaved amplified polymorphic sequence (CAPS) marker, CAPS2430, was developed and this maker was co-segregated with MePhyto in both F 2 population and a collection of 36 melon accessions. Thus MELO3C002430 was considered as the candidate gene and CAPS2430 was a promising marker for marker-assisted selection (MAS) in breeding. These results lay a foundation for revealing the resistance mechanism of melon to P. capsici.

In order to characterize unauthorized genetically modified petunia, an integrated strategy has been applied here on several suspected petunia samples from the European market. More precisely, DNA fragments of interest were produced by DNA walking anchored on key targets, earlier detected by real-time PCR screening analysis, to be subsequently sequenced using the MinION platform from Oxford Nanopore Technologies. This way, the presence of genetically modified petunia was demonstrated via the characterization of their transgene flanking regions as well as unnatural associations of elements from their transgenic cassette.

Chromosome organization is crucial for genome function. Here, we present a method for visualizing chromosomal DNA at super-resolution and then integrating Hi-C data to produce three-dimensional models of chromosome organization. Using the super-resolution microscopy methods of OligoSTORM and OligoDNA-PAINT, we trace 8 megabases of human chromosome 19, visualizing structures ranging in size from a few kilobases to over a megabase. Focusing on chromosomal regions that contribute to compartments, we discover distinct structures that, in spite of considerable variability, can predict whether such regions correspond to active (A-type) or inactive (B-type) compartments. Imaging through the depths of entire nuclei, we capture pairs of homologous regions in diploid cells, obtaining evidence that maternal and paternal homologous regions can be differentially organized. Finally, using restraint-based modeling to integrate imaging and Hi-C data, we implement a method-integrative modeling of genomic regions (IMGR)-to increase the genomic resolution of our traces to 10 kb., Competing Interests: I have read the journal’s policy and the authors of this manuscript have the following competing interests: C-tW, BJB, RBM, SCN, SC, and HQN hold or have patent filings pertaining to Oligopaints and related technologies, including other oligo-based methods for imaging. These technologies may be licensed to ReadCoor, a company in which C-tW holds equity. PY and BJB have filed patents related to DNA-PAINT. DNA-PAINT technology has been licensed to Ultivue Inc., a company in which PY is an equity holder and cofounder. PY is also a co-founder of NuProbe Global.

Background: Recently, an integrated DNA walking strategy has been proposed to prove the presence of GMO via the characterisation of sequences of interest, including their transgene flanking regions and the unnatural associations of elements in their transgenic cassettes. To this end, the p35S, tNOS and t35S pCAMBIA elements have been selected as key targets, allowing the coverage of most of GMO, EU authorized or not. In the present study, a bidirectional DNA walking method anchored on the CryAb/c genes is proposed with the aim to cover additional GMO and additional sequences of interest., Results: The performance of the proposed bidirectional DNA walking method anchored on the CryAb/c genes has been evaluated in a first time for its feasibility using several GM events possessing these CryAb/c genes. Afterwards, its sensitivity has been investigated through low concentrations of targets (as low as 20 HGE). In addition, to illustrate its applicability, the entire workflow has been tested on a sample mimicking food/feed matrices analysed in GMO routine analysis., Conclusion: Given the successful assessment of its performance, the present bidirectional DNA walking method anchored on the CryAb/c genes can easily be implemented in GMO routine analysis by the enforcement laboratories and allows completing the entire DNA walking strategy in targeting an additional transgenic element frequently found in GMO.

Large repeat rich genomes present challenges for assembly using short read technologies. The 32 Gb axolotl genome is estimated to contain ~19 Gb of repetitive DNA making an assembly from short reads alone effectively impossible. Indeed, this model species has been sequenced to 20× coverage but the reads could not be conventionally assembled. Using an alternative strategy, we have assembled subsets of these reads into scaffolds describing over 19,000 gene models. We call this method Virtual Genome Walking as it locally assembles whole genome reads based on a reference transcriptome, identifying exons and iteratively extending them into surrounding genomic sequence. These assemblies are then linked and refined to generate gene models including upstream and downstream genomic, and intronic, sequence. Our assemblies are validated by comparison with previously published axolotl bacterial artificial chromosome (BAC) sequences. Our analyses of axolotl intron length, intron-exon structure, repeat content and synteny provide novel insights into the genic structure of this model species. This resource will enable new experimental approaches in axolotl, such as ChIP-Seq and CRISPR and aid in future whole genome sequencing efforts. The assembled sequences and annotations presented here are freely available for download from https://tinyurl.com/y8gydc6n . The software pipeline is available from https://github.com/LooseLab/iterassemble .

The W4 locus in soybean encodes a dihydroflavonol-4-reductase (DFR2) that regulates pigmentation patterns in flowers and hypocotyl. The mutable w4-m allele that governs variegated flowers has arisen through insertion of a CACTA-type transposable element, Tgm9, in DFR2. In the w4-m line, reversion from variegated to purple flower indicates excision of Tgm9, and its insertion at a new locus. Previously, we have identified a male-sterile, female-sterile mutant among the selfed progenies of a revertant plant carrying only purple flowers. Co-segregation between Tgm9 and the sterility phenotype suggested that the mutant was generated by insertion of Tgm9 at the St8 locus. The transposon was localized to exon 10 of Glyma.16G072300 that shows high identity to the MER3 DNA helicase involved in crossing over. Molecular analysis of fertile branches from two independent revertant plants confirmed precise excision of Tgm9 from the st8 allele, which restored fertility. In soybean, the gene is expressed in flower-buds, trifoliate leaves and stem. Phylogenetic analysis placed St8 in a clade with the Arabidopsis and rice MER3 suggesting that St8 is most likely the orthologous MER3 soybean gene. This study established the utility of Tgm9 in gene identification as well as in forward and reverse genetics studies.

Background: In order to provide a system fully integrated with qPCR screening, usually used in GMO routine analysis, as well as being able to detect, characterize and identify a broad spectrum of GMOs in food/feed matrices, two bidirectional DNA walking methods targeting p35S or tNOS, the most common transgenic elements found in GM crops, were developed. These newly developed DNA walking methods are completing the previously implemented DNA walking method targeting the t35S pCAMBIA element., Methods: Food/feed matrices containing transgenic crops (Bt rice or MON863 maize) were analysed using the integrated DNA walking system., Results: First, the newly developed DNA walking methods, anchored on the sequences used for the p35S or tNOS qPCR screening, were tested on Bt rice that contains these two transgenic elements. Second, the methods were assessed on a maize sample containing a low amount of the GM MON863 event, representing a more complex matrix in terms of genome size and sensitivity. Finally, to illustrate its applicability in GMO routine analysis by enforcement laboratories, the entire workflow of the integrated strategy, including qPCR screening to detect the potential presence of GMOs and the subsequent DNA walking methods to characterize and identify the detected GMOs, was applied on a GeMMA Scheme Proficiency Test matrix. Via the characterization of the transgene flanking region between the transgenic cassette and the plant genome as well as of a part of the transgenic cassette, the presence of GMOs was properly confirmed or infirmed in all tested samples., Conclusion: Due to their simple procedure and their short time-frame to get results, the developed DNA walking methods proposed here can be easily implemented in GMO routine analysis by the enforcement laboratories. In providing crucial information about the transgene flanking regions and/or the transgenic cassettes, this DNA walking strategy is a key molecular tool to prove the presence of GMOs in any given food/feed matrix.

Current genome walking methods are cumbersome to perform and can result in non-specific products. Here, we demonstrate the use of partially overlapping primer-based PCR (POP-PCR), a direct genome walking technique for the isolation of unknown flanking regions. This method exploits the partially overlapping characteristic at the 3' ends of a set of POP primers (walking primers), which guarantees that the POP primer only anneals to the POP site of the preceding PCR product at relatively low temperatures. POP primer adaptation priming at the genomic DNA/POP site occurs only once due to one low-/reduced-stringency cycle in each nested PCR, resulting in the synthesis of a pool of single-stranded DNA molecules. Of this pool, the target single-stranded DNA is replicated to the double-stranded form bound by the specific primer and the POP primer in the subsequent high-stringency cycle due to the presence of the specific primer-binding site. The non-target single stranded DNA does not become double stranded due to the absence of a binding site for any of the primers. Therefore, the POP-PCR enriches target DNA while suppressing non-target products. We successfully used POP-PCR to retrieve flanking regions bordering the gadA locus in Lactobacillus brevis NCL912, malQ in Pichia pastoris GS115, the human aldolase A gene, and hyg in rice.

Inversions are an integral part of structural variation within species, and they play a leading role in genome reorganization across species. Work at both the cytological and genome sequence levels has revealed heterogeneity in the distribution of inversion breakpoints, with some regions being recurrently used. Breakpoint reuse at the molecular level has mostly been assessed for fixed inversions through genome sequence comparison, and therefore rather broadly. Here, we have identified and sequenced the breakpoints of two polymorphic inversions-E1 and E2 that share a breakpoint-in the extant Est and E1 + 2 chromosomal arrangements of Drosophila subobscura. The breakpoints are two medium-sized repeated motifs that mediated the inversions by two different mechanisms: E1 via staggered breaks and subsequent repair and E2 via repeat-mediated ectopic recombination. The fine delimitation of the shared breakpoint revealed its strict reuse at the molecular level regardless of which was the intermediate arrangement. The occurrence of other rearrangements in the most proximal and distal extended breakpoint regions reveals the broad reuse of these regions. This differential degree of fragility might be related to their sharing the presence outside the inverted region of snoRNA-encoding genes., (© The Author 2014. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

In the coming years, the frequency of unauthorised genetically modified organisms (GMOs) being present in the European food and feed chain will increase significantly. Therefore, we have developed a strategy to identify unauthorised GMOs containing a pCAMBIA family vector, frequently present in transgenic plants. This integrated approach is performed in two successive steps on Bt rice grains. First, the potential presence of unauthorised GMOs is assessed by the qPCR SYBR®Green technology targeting the terminator 35S pCAMBIA element. Second, its presence is confirmed via the characterisation of the junction between the transgenic cassette and the rice genome. To this end, a DNA walking strategy is applied using a first reverse primer followed by two semi-nested PCR rounds using primers that are each time nested to the previous reverse primer. This approach allows to rapidly identify the transgene flanking region and can easily be implemented by the enforcement laboratories., (Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Genome walking is a method for determining the DNA sequence of unknown genomic regions flanking a region of known DNA sequence. The Genome walking has the potential to capture 6-7 kb of sequence in a single round. Ideal for identifying gene promoter regions where only the coding region. Genome walking also has significant utility for capturing homologous genes in new species when there are areas in the target gene with strong sequence conservation to the characterized species. The increasing use of next-generation sequencing technologies will see the principles of genome walking adapted to in silico methods. However, for smaller projects, PCR-based genome walking will remain an efficient method of characterizing unknown flanking sequence.

Many genome walking methods based on polymerase chain reaction (PCR) are available, including those with and without restriction enzyme modification. Nevertheless, these methods suffer from low reproducibility, inefficiency, and non-specificity. Here, we present a traceable and efficient PCR strategy: randomly broken fragment PCR with 5' end-directed adaptor for genome walking. The genome is first fragmented randomly. After blunting ends, the fragments are ligated to the 5' end-directed adaptors. Semi-nested PCR is then performed. Thus, we can obtain an unknown sequence by cloning the fragments of interest, followed by sequencing. This method effectively bypasses the above-mentioned obstacles and offers the advances: 1) genome fragmentation without using restriction enzymes; 2) enhancement of primer specificity and the prevention of self-ligation between the adaptors by employing a 5' end-directed adaptor. All of the steps in this new method are straightforward, and the unknown sequence can be definitively obtained by merely applying the method once.

To identify the transposon insertion sites in a soil actinomycete, Saccharopolyspora spinosa, a genome walking approach, termed SPTA-PCR, was developed. In SPTA-PCR, a simple procedure consisting of TA cloning and a high stringency PCR, following the single primer-mediated, randomly-primed PCR, can eliminate non-target DNA fragments and obtain target fragments specifically. Using SPTA-PCR, the DNA sequence adjacent to the highly conserved region of lectin coding gene in onion plant, Allium chinense, was also cloned.

In this article, we developed a novel PCR method, termed loop-linker PCR, to isolate flanking sequences in transgenic crops. The novelty of this approach is its use of a stem-loop structure to design a loop-linker adapter. The adapter is designed to form a nick site when ligated with restricted DNA. This modification not only can prevent the self-ligation of adapters but also promotes the elongation of the 3' end of the loop-linker adapter to generate a stem-loop structure in the ligation products. Moreover, the suppressive effect of the stem-loop structure decreases nonspecific amplification and increases the success rate of the approach; all extension products will suppress exponential amplification except from the ligation product that contains the specific primer binding site. Using this method, 442, 1830, 107, and 512 bp left border flanking sequences were obtained from the transgenic maizes LY038, DAS-59122-7, Event 3272, and the transgenic soybean MON89788, respectively. The experimental results demonstrated that loop-linker PCR is an efficient, reliable, and cost-effective method for identifying flanking sequences in transgenic crops and could be applied for other genome walking applications., (Copyright © 2012 International Union of Biochemistry and Molecular Biology, Inc.)

A-T linker adapter polymerase chain reaction (PCR) was modified and employed for the isolation of genomic fragments adjacent to a known DNA sequence. The improvements in the method focus on two points. The first is the modification of the PO(4) and NH(2) groups in the adapter to inhibit the self-ligation of the adapter or the generation of nonspecific products. The second improvement is the use of the capacity of rTaq DNA polymerase to add an adenosine overhang at the 3' ends of digested DNA to suppress self-ligation in the digested DNA and simultaneously resolve restriction site clone bias. The combination of modifications in the adapter and in the digested DNA leads to T/A-specific ligation, which enhances the flexibility of this method and makes it feasible to use many different restriction enzymes with a single adapter. This novel A-T linker adapter PCR overcomes the inherent limitations of the original ligation-mediated PCR method such as low specificity and a lack of restriction enzyme choice. Moreover, this method also offers higher amplification efficiency, greater flexibility, and easier manipulation compared with other PCR methods for chromosome walking. Experimental results from 143 Arabidopsis mutants illustrate that this method is reliable and efficient in high-throughput experiments., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Clear cell sarcoma of kidney (CCSK) is classified as a tumour of unfavourable histology by the National Wilms' Tumor Study Group. It has worse clinical outcomes than Wilms' tumour. Virtually nothing is known about CCSK biology, as there have been very few genetic aberrations identified to act as pointers in this cancer. Three cases of CCSK bearing a chromosomal translocation, t(10;17)(q22;p13), have been individually reported but not further investigated to date. The aim of this research was to characterize t(10;17)(q22;p13) in CCSK to identify the genes involved in the translocation breakpoints. Using fluorescently labelled bacterial artificial chromosomes (BACs) and a chromosome-walking strategy on an index case of CCSK with t(10;17)(q22;p13) by karyotype, we identified the chromosomal breakpoints on 17p13.3 and 10q22.3. The translocation results in rearrangement of YWHAE on chromosome 17 and FAM22 on chromosome 10, producing an in-frame fusion transcript of ∼3 kb, incorporating exons 1-5 of YWHAE and exons 2-7 of FAM22, as determined by RT-PCR using YWHAE- and FAM22-specific primers. The YWHAE-FAM22 transcript was detected in six of 50 further CCSKs tested, therefore showing an overall incidence of 12% in our cohort. No transcript-positive cases presented with stage I disease, despite this being the stage for 31% of our cohort. Tumour cellularity was significantly higher in the cases that were transcript-positive. Based on the chromosome 10 breakpoint identified by FISH and the sequences of the full-length transcripts obtained, the FAM22 members involved in the translocation in these CCSK cases include FAM22B and FAM22E. Elucidation of the role of YWHAE-FAM22 in CCSK will assist development of more efficient and targeted therapies for this childhood cancer, which currently has poor outcomes., (Copyright © 2012 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd.)

A new method to improve the efficiency of flanking sequence identification by genome walking was developed based on an expanded, sequential list of criteria for selecting candidate enzymes, plus several other optimization steps. These criteria include: step (1) initially choosing the most appropriate restriction enzyme according to the average fragment size produced by each enzyme determined using in silico digestion of genomic DNA, step (2) evaluating the in silico frequency of fragment size distribution between individual chromosomes, step (3) selecting those enzymes that generate fragments with the majority between 100 bp and 3,000 bp, step (4) weighing the advantages and disadvantages of blunt-end sites vs. cohesive-end sites, step (5) elimination of methylation sensitive enzymes with methylation-insensitive isoschizomers, and step (6) elimination of enzymes with recognition sites within the binary vector sequence (T-DNA and plasmid backbone). Step (7) includes the selection of a second restriction enzyme with highest number of recognition sites within regions not covered by the first restriction enzyme. Step (8) considers primer and adapter sequence optimization, selecting the best adapter-primer pairs according to their hairpin/dimers and secondary structure. In step (9), the efficiency of genomic library development was improved by column-filtration of digested DNA to remove restriction enzyme and phosphatase enzyme, and most important, to remove small genomic fragments (<100 bp) lacking the T-DNA insertion, hence improving the chance of ligation between adapters and fragments harbouring a T-DNA. Two enzymes, NsiI and NdeI, fit these criteria for the Arabidopsis thaliana genome. Their efficiency was assessed using 54 T(3) lines from an Arabidopsis SK enhancer population. Over 70% success rate was achieved in amplifying the flanking sequences of these lines. This strategy was also tested with Brachypodium distachyon to demonstrate its applicability to other larger genomes.

Background: The advent of genomics-based technologies has revolutionized many fields of biological enquiry. However, chromosome walking or flanking sequence cloning is still a necessary and important procedure to determining gene structure. Such methods are used to identify T-DNA insertion sites and so are especially relevant for organisms where large T-DNA insertion libraries have been created, such as rice and Arabidopsis. The currently available methods for flanking sequence cloning, including the popular TAIL-PCR technique, are relatively laborious and slow., Results: Here, we report a simple and effective fusion primer and nested integrated PCR method (FPNI-PCR) for the identification and cloning of unknown genomic regions flanked known sequences. In brief, a set of universal primers was designed that consisted of various 15-16 base arbitrary degenerate oligonucleotides. These arbitrary degenerate primers were fused to the 3' end of an adaptor oligonucleotide which provided a known sequence without degenerate nucleotides, thereby forming the fusion primers (FPs). These fusion primers are employed in the first step of an integrated nested PCR strategy which defines the overall FPNI-PCR protocol. In order to demonstrate the efficacy of this novel strategy, we have successfully used it to isolate multiple genomic sequences namely, 21 orthologs of genes in various species of Rosaceace, 4 MYB genes of Rosa rugosa, 3 promoters of transcription factors of Petunia hybrida, and 4 flanking sequences of T-DNA insertion sites in transgenic tobacco lines and 6 specific genes from sequenced genome of rice and Arabidopsis., Conclusions: The successful amplification of target products through FPNI-PCR verified that this novel strategy is an effective, low cost and simple procedure. Furthermore, FPNI-PCR represents a more sensitive, rapid and accurate technique than the established TAIL-PCR and hiTAIL-PCR procedures.

An important aspect in the safety assessment of transgenic plants is the exact location of transgene insertion sites within the host genome. However, robust standard operating procedures are not currently available. Using potato as a test species, different methodologies for the determination of insertion sites using a range of published protocols and commercially available kits were assessed in transgenic lines of varying degrees of complexity, from low copy number to complex re-transformed and co-transformed lines. Three commercial kits, APAgene™ GOLD Genome Walking Kit (BIO S&T), DNA Walking SpeedUp™ Kit II (Seegene), and Universal Vectorette™ System (Sigma) were compared with an adaptor-mediated PCR technique. Overall, the APAgene™ kit was used with a high success rate with low copy number potato lines, and also more complex co- and re-transformed lines, and adhering to key confirmation steps it was possible to obtain flanking sequence ranging in size from 300 to 2,500 bp and eliminate PCR artefacts from the analysis.

The genetic diversity of three temperate fruit tree phytoplasmas 'Candidatus Phytoplasma prunorum', 'Ca. P. mali' and 'Ca. P. pyri' has been established by multilocus sequence analysis. Among the four genetic loci used, the genes imp and aceF distinguished 30 and 24 genotypes, respectively, and showed the highest variability. Percentage of substitution for imp ranged from 50 to 68 % according to species. Percentage of substitution varied between 9 and 12 % for aceF, whereas it was between 5 and 6 % for pnp and secY. In the case of 'Ca P. prunorum' the three most prevalent aceF genotypes were detected in both plants and insect vectors, confirming that the prevalent isolates are propagated by insects. The four isolates known to be hypo-virulent had the same aceF sequence, indicating a possible monophyletic origin. Haplotype network reconstructed by eBURST revealed that among the 34 haplotypes of 'Ca. P. prunorum', the four hypo-virulent isolates also grouped together in the same clade. Genotyping of some Spanish and Azerbaijanese 'Ca. P. pyri' isolates showed that they shared some alleles with 'Ca. P. prunorum', supporting for the first time to our knowledge, the existence of inter-species recombination between these two species.

The availability of a wider range of promoters for regulated expression in valuable transgenic crops would benefit functional genomics studies and current biotechnology programs aimed at improved productivity. Polymerase chain reaction (PCR)-based genome walking techniques are commonly used to isolate promoters or 5' flanking genomic regions adjacent to known cDNA sequences in genomes that are not yet completely sequenced. However, these techniques are problematic when applied directly to DNA isolated from crops with highly complex and large genomes. An adaptor ligation-mediated PCR-based BAC genome walking method is described here for the efficient isolation of promoters of multigene family members, such as the putative defense and fiber biosynthesis DIRIGENT genes that are abundant in the stem of sugarcane, a species with a highly polyploid genome. The advantage of this method is the efficient and specific amplification of the target promoter using BAC genomic DNA as template for the adaptor ligation-mediated PCR walking.

SiteFinding-PCR has been recently reported to be a useful technique in order to identify unknown DNA fragments located adjacent to available sequences. However, this method has so far only been applied to few DNA sources including plants, samples from bioleaching communities, and a Pseudomonas strain. In order to complete the sequence information of two gene clusters in Gram-positive rhodococci the original protocol was applied yielding amplicons of insufficient size. The binding site of the previously published SiteFinder-2 oligo proved to be unsuitable for Rhodococcus and other members of the Actinobacteria since the binding motif occurred too frequently. Available genome sequences of different Actinobacteria were analysed and the binding site of the SiteFinder oligo modified. Moreover, PCR conditions were adapted to the high GC content of the template DNA allowing the successful adaptation of this method to two members of the Actinobacteria.

Genome walking is a commonly used technique for the identification of DNA sequences adjacent to known regions. Despite the development of various genome walking methods, nonspecific products are often produced in certain circumstances, especially when GC-rich DNA sequences are dealt with. To effectively resolve such technical issues, a simple nested polymerase chain reaction-based genome walking method has been developed by implementing a progressively decreased annealing temperature from 70 degrees C to 47.5 degrees C in the first round of amplification and a high annealing temperature of 65 degrees C in the second round of amplification. During the entire process, a lower ramp rate of 1.5 degrees C s(-1) and cooling rate of 2.5 degrees C s(-1) are performed to reach the annealing temperature. Using this method, we successfully obtained the upstream and downstream sequences of three GC-rich genes involved in the biosynthetic pathways of secondary metabolites from two bacterial genomes. The efficient amplification of DNA target longer than 1.5 Kb with GC content up to 75.0% indicates that the present technique could be a valuable tool for the investigation of biosynthetic pathways of various secondary metabolites.

Background: Insertion mutant isolation and characterization are extremely valuable for linking genes to physiological function. Once an insertion mutant phenotype is identified, the challenge is to isolate the responsible gene. Multiple strategies have been employed to isolate unknown genomic DNA that flanks mutagenic insertions, however, all these methods suffer from limitations due to inefficient ligation steps, inclusion of restriction sites within the target DNA, and non-specific product generation. These limitations become close to insurmountable when the goal is to identify insertion sites in a high throughput manner., Methodology/principal Findings: We designed a novel strategy called Restriction Site Extension PCR (RSE-PCR) to efficiently conduct large-scale isolation of unknown genomic DNA fragments linked to DNA insertions. The strategy is a modified adaptor-mediated PCR without ligation. An adapter, with complementarity to the 3' overhang of the endonuclease (KpnI, NsiI, PstI, or SacI) restricted DNA fragments, extends the 3' end of the DNA fragments in the first cycle of the primary RSE-PCR. During subsequent PCR cycles and a second semi-nested PCR (secondary RSE-PCR), touchdown and two-step PCR are combined to increase the amplification specificity of target fragments. The efficiency and specificity was demonstrated in our characterization of 37 tex mutants of Arabidopsis. All the steps of RSE-PCR can be executed in a 96 well PCR plate. Finally, RSE-PCR serves as a successful alternative to Genome Walker as demonstrated by gene isolation from maize, a plant with a more complex genome than Arabidopsis., Conclusions/significance: RSE-PCR has high potential application in identifying tagged (T-DNA or transposon) sequence or walking from known DNA toward unknown regions in large-genome plants, with likely application in other organisms as well.

We developed a simple and robust method for removing nonspecific amplification produced during gene walking with a gene-specific primer and a degenerate primer. The primary walking polymerase chain reaction (PCR) was followed by two or three PCR rounds, each incorporating a low concentration of a reverse hybrid primer, where the 3' end was bound to a target sequence generated in the preceding PCR round and the 5' end was a new sequence that generated a target sequence for the next PCR round. The low concentration of the hybrid primer and the extent of amplicon stem-loop formation inhibited nonspecific amplification and enabled successful walking along three genes., (Copyright 2010 Elsevier Inc. All rights reserved.)

This article describes the development of an improved method for the isolation of genomic fragments adjacent to a known DNA sequence based on a cassette ligation-mediated polymerase chain reaction (PCR) technique. To reduce the nonspecific amplification of PCR-based genome walking, the 3' ends of the restriction enzyme-digested genomic DNA fragments were blocked with dideoxynucleoside triphosphate (ddNTP) and ligated with properly designed cassettes. The modified genomic DNA fragments flanked with cassettes were used as a template for the amplification of a target gene with a gene-specific primer (GSP) and a cassette primer (CP). The ddNTP blocking of the genomic DNA ends significantly reduced the nonspecific amplification and resulted in a simple and rapid walking along the genome. The efficiency of the template-blocking PCR method was confirmed by a carefully designed control experiment. The method was successfully applied for the cloning of the PGK1 promoter from Pichia ciferrii and two novel cellulase genes from Penicillium sp., (Copyright 2009 Elsevier Inc. All rights reserved.)

We describe the application of a novel genome walking (GW) strategy for the one-shot identification of members of multigene families. The method was used to study the spinach Lhcb1 family (encoding the light harvesting complex protein Lhcb1), for which three cDNAs were known. Two additional genes and regulatory regions of the five members of the family were identified. For one of the newly detected genes, sequencing of full-length cDNA and analysis of regulatory regions by gel-shift are also reported. To our best knowledge, this is the first report on the use of a GW approach for the study of a multigene family.

Untranslated regions (UTRs) of eukaryotic mRNAs play crucial roles in post-transcriptional regulation of gene expression via the modulation of nucleocytoplasmic mRNA transport, translation efficiency, subcellular localization, and message stability. Single-nucleotide polymorphisms (SNPs) in UTRs of a candidate gene may also change the post-transcriptional regulation of a gene or function by nucleotide mutation. For species that have not been entirely sequenced genomically, new methods need to be devised to discover SNPs in noncoding regions of candidate genes. In this study, based on the expressed sequence tag (EST) of Pinus radiata (Monterey pine), we obtained all the sequences of UTRs of the actin gene by using a chromosome walking method. We also detected all the SNPs in and around the coding region of the actin gene. In this way, the full genomic sequence (2154 bp) of the actin gene was identified, including the 5&rsquo;UTR, introns, the coding sequence, and the 3&rsquo;UTR. PCR amplification and DNA fragment sequencing from 200 unrelated P. radiata trees revealed a total of 21 SNPs in the actin gene, of which 3 were located in the 5&rsquo;UTR, 3 in the introns, 10 in the coding sequence, and 5 in the 3&rsquo;UTR. We show that chromosome walking can be used for obtaining the sequence of UTRs, and then, based on this sequence, to discover SNPs in the noncoding regions of candidate genes from this species without an entire genomic sequence.

We have devised an improved method of genome walking, named rolling circle amplification of genomic templates for Inverse PCR (RCA-GIP). The method is based on the generation of circular genomic DNA fragments, followed by rolling circle amplification of the circular genomic DNA using phi29 DNA polymerase without need for attachment of anchor sequences. In this way from the circular genomic DNA fragments, after RCA amplification, a large amount of linear concatemers is generated suitable for Inverse PCR template that can be amplified, sequenced or cloned allowing the isolation of the 3'- and 5'- of unknown ends of genomic sequences. To prove the concept of the proposed methodology, we used this procedure to isolate the promoter regions from different species. Herein as an example we present the isolation of four promoter regions from Crocus sativus, a crop cultivated for saffron production.

Although researchers can access information on the entire genomic DNA sequence of typical research organisms, convenient genome walking methods in the laboratory are still needed. For the analysis of microorganisms, these methods are especially useful because the available genetic information is often scarce or limited.Many genomic walking methods are based on the polymerase chain reaction (PCR), and useful methods have been developed. This report reviews the methodologies of PCR-mediated genomic walking methods and evaluates their efficiency and usefulness to help microbiologists to select the appropriate method for each target microorganism. The concept and specific features, such as advantages and disadvantages, of five major PCR-mediated genomic walking methods (random PCR, inverse PCR, panhandle PCR, cassette PCR, and rapid amplification of genomic ends) are briefly described. The improved methods and their characteristics are listed, and a report of experimental comparison of such methods is also introduced briefly. Each of these methods has both advantages and disadvantages, and there is a trade-off between the specificity of target amplification and the ease of the method. The cassette PCR seems to be a standard method, but suitable method should be selected in consideration of the characteristics of the material.

Environmental DNA is an extremely rich source of genes encoding enzymes with novel biocatalytic activities. To tap this source, function-based and sequence-based strategies have been established to isolate, clone, and express these novel metagenome-derived genes. Sequence-based strategies, which rely on PCR with consensus primers and genome walking, represent an efficient and inexpensive alternative to activity-based screening of recombinant strains harbouring fragments of environmental DNA. This review covers the diverse array of genome-walking techniques, which were originally developed for genomic DNA and currently are also used for PCR-based recovery of entire genes from the metagenome. These sequence-based gene mining methods appear to offer a powerful tool for retrieving from the metagenome novel genes encoding biocatalysts with potential applications in biotechnology.

Here we report the development of an accurate and efficient genome walking approach based on ligation-mediated polymerase chain reaction (PCR) and magnetic capture hybrid selection technique. This approach overcomes the nonspecific amplification products that often occur in similar PCR-based methods. Our strategy was successfully applied for the cloning of the promoter region of the Cc RNase gene. This rapid, cost-effective, and sensitive protocol can easily be extended for use in the isolation and amplification of any target sequences for which only partial information is known such as identification of the position of transposable elements and integrated viral DNA sequences.

We developed a PCR-based high-throughput genome-walking protocol. The novelty of this protocol is in the random introduction of unique walker primer binding sites into different regions of the genome efficiently by taking advantage of the rolling circle mode of DNA synthesis by Phi29 DNA polymerase after annealing the partially degenerate primers to the denatured genomic DNA. The inherent strand-displacement activity of the Phi29 DNA polymerase displaces the 5' ends of downstream strands and DNA synthesis continues, resulting in a large number of overlapping fragments that cover the whole genome with the unique walker adapter attached to the 5' end of all the genomic DNA fragments. The directional genome walking can be performed using a locus-specific primer and the walker primer and Phi29 DNA polymerase-amplified genomic DNA fragments as template. The locus-specific primer will determine the position and direction of the genome walk. Two rounds of successive PCR amplifications by locus-specific and walker primers and their corresponding nested primers effectively amplify the flanking DNA fragments. The desired PCR fragment can be either cloned or sequenced directly using another nested, locus-specific primer. We successfully used this protocol to isolate and sequence 5' flanking regions/promoters of selected plant genes.

The genes for the patulin biosynthetic pathway are most likely arranged in a cluster, as is often the case for other mycotoxins. With this in mind, GeneWalking has been performed to identify genes both upstream and downstream of the isoepoxydon dehydrogenase (idh) gene. A gene present in Penicillium griseofulvum NRRL 2159A had high sequence homology to the isoamyl alcohol oxidase (iao) gene and was detected downstream of the idh gene and in the same orientation. By virtue of the presence of a signal peptide sequence, the newly identified gene coded for a secreted protein with an FAD-binding domain and potential for N-glycosylation. An open reading frame consisted of 1946 nucleotides, containing four putative introns and encoding a 22 amino acid signal peptide. The 571 amino acid mature protein contained nine cysteine residues and had 11 potential N-linked glycosylation sites. Searches using GenBank indicated that Aspergillus terreus, A. oryzae, A. fumigatus, and Gibberella zeae contain genes coding for a putative isoamyl alcohol oxidase. When the translated query was compared with the translated database, the highest scores were seen with A. clavatus (E value of 0.00), A. fumigatus (E value of 8e(-142)), and A. oryzae and A. terreus (each having an E value of 2e(-141)). Reverse transcription-polymerase chain reaction analysis confirmed that the iao gene was transcribed. The amplified products were sequenced for confirmation of their identities. This is the first report of an isoamyl alcohol oxidase gene in a species of the genus Penicillium.

Determination of nucleotide sequences adjacent to a known region is a recurring need in many genome scale studies. Various methods have been developed based on PCR techniques in order to fulfill this aim and overcome the time-consuming approach of screening genomic libraries. Usually these protocols rely on specific requirements and strategies, such as the presence of suitable nucleotide restriction sites and ligation of specific single- or double-strand linkers, thus limiting their application to a certain extent. In this paper we present an alternative PCR-based protocol, consisting of four main steps: (i) extension of a sequence-specific primer; (ii) 3'-tailing of extended single-strand DNA; (iii) PCR; and (iv) nested PCR amplifications. This method, which appears to be a valid alternative to the other PCR-based protocols, was used for the identification of sequences flanking the cDNA encoding region of the Lhcb 1.1 gene (one member of the multigene family coding for the light harvesting protein Lhcbl) in the spinach genome.

An effective PCR-based genomic walking approach is described to discover previously unknown flanking genomic DNA sequences from Candidatus Liberibacter asiaticus, an unculturable, phloem-limited bacterium. Using this technique, 8564bp of new DNA sequences were obtained from three genomic loci; tufB-secE-nusG-rplKAJL-rpoBC gene cluster, omp gene (outer membrane protein, Omp) and 16/23S rRNA gene in Ca. L. asiaticus. These, together with publicly available Ca. Liberibacter sequences, are clustered into five contigs and two singlets representing 24,477 non-redundant base pairs. BLAST annotation predicts 12 full-length genes, two partial genes and one pseudogene among these sequences. The sequences obtained in this study provide new genome information about Ca. Liberibacter that will facilitate development of new genome-based detection tools. The technique described here can also be employed to acquire new genomic information for other unculturable or fastidious organisms for which available sequences are limited or for filling sequence gaps between known flanking genomic DNA sequences.

This report describes a novel and efficient method for walking the sequence of a genomic deoxyribonucleic acid (DNA) from a known region to an unknown region based on an oligodeoxynucleotide (oligo) cassette-mediated polymerase chain reaction technique. In this method, genomic DNA is digested by a restriction enzyme that generates a sticky 5'-end, followed by ligation of a one-base excess oligo-adaptor using T4 DNA ligase. The adaptor consists of two complementary oligos that form the same sticky end as the digested genomic DNA fragments, except that the 5'-overhang base overlaps the corresponding 3'-end base of the restriction site. This overhanging terminal base prevents ligation between the adaptors, and the appropriate molar ratio of adaptor to genomic DNA enables specific amplification of the target sequence. T4 DNA ligase catalyzes both the ligation of the phosphorylated overhang base of the adaptor to genomic DNA and the excision of the corresponding 3'-terminal base of the genomic DNA. This sequence-specific exonuclease activity of T4 DNA ligase was confirmed by ligation of an alternative adaptor in which the 5'-terminal base was not consistent with the corresponding 3'-terminal base. Using this technique, the 3'- and 5'-flanking sequences of the catalase gene of the ciliate Paramecium bursaria were determined.

The increased demand for enzymes with new properties makes indispensable the development of easy and rapid strategies to obtain complete genes of new enzymes. Here a strategy is described which includes screening by PCR of new subtilases mediated by Consensus-Degenerate Hybrid Oligonucleotide Primers (CODEHOP) and an improved genome walking method to obtain the complete sequence of the identified genes. Existing methods of genome walking have many limitations, which make them inefficient and time consuming. We have developed an improved genome walking method with novel advances to get a simple, rapid and more efficient procedure based on cassette-ligation. Improvements consist basically in the possibility of a genomic DNA digestion with any restriction enzyme, blunting and 3' adenylation of digested DNA by Taq DNA polymerase to avoid self-circularization, followed by TA ligation of the adenine 3' overhanging end to the same unphosphorylated oligo-cassette. The efficiency of the genome walking method was demonstrated by finding the unknown ends of all gene fragments tested, previously obtained by CODEHOP-mediated PCR, including three subtilases (P4, P6 and P7), one xylanase and one lipase, from different strains of Antarctic marine bacteria.

We developed a self-formed adaptor PCR (termed SEFA PCR) which can be used for chromosome walking. Most of the amplified flanking sequences were longer than 2.0 kb, and some were as long as 6.0 kb. SEFA PCR is simple and efficient and should have broad applications in the isolation of unknown sequences in complex genomes.

We describe a core gene cluster, comprised of eight genes (designated CTB1-8), and associated with cercosporin toxin production in Cercospora nicotianae. Sequence analysis identified 10 putative open reading frames (ORFs) flanking the previously characterized CTB1 and CTB3 genes that encode, respectively, the polyketide synthase and a dual methyltransferase/monooxygenase required for cercosporin production. Expression of eight of the genes was co-ordinately induced under cercosporin-producing conditions and was regulated by the Zn(II)Cys(6) transcriptional activator, CTB8. Expression of the genes, affected by nitrogen and carbon sources and pH, was also controlled by another transcription activator, CRG1, previously shown to regulate cercosporin production and resistance. Disruption of the CTB2 gene encoding a methyltransferase or the CTB8 gene yielded mutants that were completely defective in cercosporin production and inhibitory expression of the other CTB cluster genes. Similar 'feedback' transcriptional inhibition was observed when the CTB1, or CTB3 but not CTB4 gene was inactivated. Expression of four ORFs located on the two distal ends of the cluster did not correlate with cercosporin biosynthesis and did not show regulation by CTB8, suggesting that the biosynthetic cluster was limited to CTB1-8. A biosynthetic pathway and a regulatory network leading to cercosporin formation are proposed.

An enhanced universal fast walking (UFW) method adapted for the mapping of transposons is described. This protocol combines the original UFW method with the use of agarase to unravel composite nucleotide sequence, thereby forgoing molecular cloning steps and the use of restriction enzymes and ligases necessary in other available genome walking methods such as the prominent inverse PCR. The minuscule automatable chemistry of UFW is completed within one reaction vessel using a constant enzyme buffer, and the intrinsic DNA fingerprints, from which amplicons may be quantitatively recovered, offer quality assurance. The core steps of the protocol, spanning half a day or less, comprise first-strand synthesis, primer destruction, random-ended-primer annealing, distal branched-end repair, second-primer destruction, lariat formation and final amplification. Distinctively, no starting or intermediate templates are wasted during the reaction series, thus achieving yields comparable to direct PCR. Ultimate per-reaction walk-lengths are schematically illimitable and sequence-ready amplicons can be produced immediately from prevalent single-copy genomic walk origins. The core UFW protocol may be applied, as described here, to expedited transposon boundary retrieval, but is also applicable to general genome walking and cDNA walking, as well as viral and other insertional element mapping.

To gain insight into the mechanism of coordination of stepping in the fore and hind legs of quadrupeds, we examined the kinematics of leg movements and the motor patterns in fore and hind leg flexor muscles in decerebrate walking cats when the two pairs of legs stepped on separate treadmills running at different speeds. When the front treadmill was slowed progressively from 0.6 to 0.3 m/s with the rear treadmill running at 0.6 m/s, the rate of stepping in both the fore and hind legs decreased and a 1:1 stepping ratio was maintained. The decrease in the rate of stepping in the hind legs was due primarily to an increase in the duration of the swing phase. Slowing the speed of the rear treadmill while keeping the front treadmill speed at 0.6 m/s decreased the rate of stepping of the hind legs, but had relatively little influence on the average rate of stepping in the forelegs. In this situation stepping in the fore and hind legs was uncoupled and the time of stepping in one hind leg relative to the ipsilateral foreleg progressively shifted during a walking sequence. Analysis of the timing of electromyographic (EMG) recordings from flexor muscles of the hip and elbow joints yielded insight into the neuronal mechanisms underlying the asymmetry in slowing either the front or rear treadmill. We propose that ipsilateral pattern generating networks are asymmetrically coupled via descending inhibitory pathways and an ascending excitatory pathway. We discuss how the characteristics of these linkages are functionally appropriate for establishing the normal timing of stepping in the hind and forelegs during slow walking.

The acquired mutation Val617Phe in the tyrosine kinase JAK2 was recently identified in most but not all patients with classical myeloproliferative disorders. We describe a cytogenetic and molecular study of a JAK2Val617Phe-negative case of essential thrombocythemia harboring the acquired translocation t(X;5)(q13;q33). We show that this involves the inactive X-chromosome and is associated with silencing of autosomal genes within the adjacent 5q minus syndrome common deleted region. This is the first documented example of autosomal gene silencing adjacent to an X-autosome breakpoint in human malignancy and such a mechanism may underlie the pathogenesis of related disorders with translocations involving Xq13.

Various PCR-based methods are available for chromosome walking from a known sequence to an unknown region. It is promising in genome-related research for the following experiments: promoter cloning, obtaining non-conservative parts of genes in new species, identification of T-DNA or transposon insertion sites and filling in gaps or unknown chromosome regions in genome sequencing. These methods consisted of three types: inverse PCR, ligation-mediated PCR and specific primer PCR. In this review, we illustrated and compared the current techniques.

Two novel lipase genes (lipJ02, lipJ03) were isolated directly from environmental DNA via genome-walking method. Lipase gene lipJ02 contained an open reading frame (ORF) of 1,425 bp and encoded a 474-amino acids lipase protein, while lipase gene lipJ03 contained an ORF of 1,413 bp and encoded a 470-amino acids lipase protein. The lipase genes were cloned into expression vector pPIC9K and successfully integrated into a heterologous fungal host, Pichia pastoris KM71, and the recombinant P. pastoris were screened via a high-throughput method. The recombinants were induced by methanol to secrete active lipases into cultural medium. The recombinant lipases were also purified and characterized. The optimum temperature for the purified lipase LipJ02 and LipJ03 was 30 and 35 degrees C, respectively, at pH 8.0. They exhibited similar thermostability, but LipJ02 exhibited better pH stability than LipJ03.

Due to the important role of cotton drought-tolerant varieties and the reported involvement in this trait of trehalose-6-phosphate-synthase, the respective gene (TPS) was isolated and characterized from cultivated cotton, Gossypium hirsutum (ZETA 2 cultivar), using a chromosome-walking technique. TPS has three exons comprising the coding region. Southern blot analysis indicated that the Gossypium genomes (A and D) contain a single copy of TPS per genome. In addition, the expression of this gene was studied in different plant tissues. Plants of the Australian cotton variety Siokra L23, known for its drought tolerance, were subjected to drought stress (using PEG 6,000 solution, for 4 h during the dark period of the day and for four consecutive days); leaves, stems and roots were collected after the end of the stress period. Total extracted RNA was examined for the presence of transcripts, in the above-mentioned tissues of stressed and well-watered plants, by reverse transcription-polymerase chain reaction (RT-PCR). The expression levels, determined semi-quantitatively, indicated that the gene was expressed in all plant tissues under both water availability conditions. However, increased expression levels of TPS were observed mainly in stressed leaves and roots compared to those of the well-watered control. This finding is in agreement with the fact that TPS participates in trehalose biosynthesis, known for its participation in stress signal transduction in higher plants.

In this paper, we present a novel PCR method, termed SiteFinding-PCR, for gene or chromosome walking. The PCR was primed by a SiteFinder at a low temperature, and then the target molecules were amplified exponentially with gene-specific and SiteFinder primers, and screened out by another gene-specific primer and a vector primer. However, non-target molecules could not be amplified exponentially owing to the suppression effect of stem-loop structure and could not be screened out. This simple method proved to be efficient, reliable, inexpensive and time-saving, and may be suitable for the molecules for which gene-specific primers are available. More importantly, large DNA fragments can be obtained easily using this method. To demonstrate the feasibility and efficiency of SiteFinding-PCR, we employed this method to do chromosome walking and obtained 16 positive results from 17 samples.

The genome of the Lyme disease pathogen Borrelia burgdorferi strain B31 MI includes one linear chromosome, 10 circular and 12 linear plasmids. Members of four paralogous gene families, revealed by genome sequencing, have been suggested as replication/partition functions for both the linear and circular plasmids. Some of these genes have been experimentally shown to be essential for the replication of the B. burgdorferi replicons that encode them. In this study, we located the region essential for replication of lp17, the second smallest linear plasmid in B. burgdorferi. We used a novel in vivo method, targeted deletion walking, to systematically delete DNA from either the left or right end of lp17. We report that the region essential for replication of lp17 is 1.8 kb (bp 7946-9766) and contains only one intact open reading frame (BBD14). Expression of BBD14 is required for the replication, suggesting that it is the replication initiator for lp17. The BBD14 protein is a member of paralogous family (PF) 62 and we present the first experimental evidence for the role of a PF 62 member. Adjacent non-coding sequences are also required, suggesting that the origin lies at least partially outside the coding region. Surprisingly, deletion of BBD21, the ParA orthologue (PF 32), had little effect upon plasmid stability or incompatibility. Finally, data are presented suggesting that lp17 replication occurs preferentially on a linear rather than a circular DNA molecule.