Search

Quantitation of therapeutic monoclonal antibodies (mAbs) in human serum could ensure that patients have adequate levels of mAbs for effective treatment. This research describes the use of affinity, glass-fiber membranes in a 96-well-plate format for rapid (

MotivationTandem mass spectrometry is an essential technology for characterizing chemical compounds at high sensitivity and throughput, and is commonly adopted in many fields. However, computational methods for automated compound identification from their MS/MS spectra are still limited, especially for novel compounds that have not been previously characterized. In recent years,in silicomethods were proposed to predict the MS/MS spectra of compounds, which can then be used to expand the reference spectral libraries for compound identification. However, these methods did not consider the compounds’ three-dimensional (3D) conformations, and thus neglected critical structural information.ResultsWe present the3D Molecular Network forMassSpectra Prediction (3DMolMS), a deep neural network model to predict the MS/MS spectra of compounds from their 3D conformations. We evaluated the model on the experimental spectra collected in several spectral libraries. The results showed that 3DMolMS predicted the spectra with the average cosine similarity of 0.687 and 0.475 with the experimental MS/MS spectra acquired in positive and negative ion modes, respectively. Furthermore, 3DMolMS model can be generalized to the prediction of MS/MS spectra acquired by different labs on different instruments through minor fine-tuning on a small set of spectra. Finally, we demonstrate that themolecular representationlearned by 3DMolMS from MS/MS spectra prediction can be adapted to enhance the prediction of chemical properties such as the elution time (ET) in the liquid chromatography and the Collisional Cross Section (CCS) measured by ion mobility spectrometry (IMS), both of which are often used to improve compound identification.Contacthatang@indiana.eduSupplementary informationThe codes of 3DMolMS is available athttps://github.com/JosieHong/3DMolMSand the web service is athttps://spectrumprediction.gnps2.org.

Using desorption electrospray ionization (DESI) as part of an automated high-throughput system, tandem mass spectra of the compounds in a pharmaceutical library were recorded in the positive mode under standardized conditions. Quality control filtering yielded an MS/MS library of 16 662 spectra. Fragmentation of subsets of the compounds in the library chosen to contain a single instance of a particular functional group (amide, piperazine, sulfonamide) was predicted by experts, and the results were compared with the experimental data. Expert performance was good to excellent for all the cases evaluated. Substituents on the functional groups were found to exert important secondary control over the fragmentation, with the main effect observed being product ion stabilization by aromatic substitution, which was consistent across the different groups evaluated. These substituent effects are generally explicable in terms of standard physical organic chemistry considerations of product ion stability as controlling fragmentation. A somewhat unexpected feature was the incidence of homolytic cleavages, driven by the stability of substituted amine radical cations. The findings of this study are intended to lay the groundwork for machine learning approaches to performing MS/MS spectrum → structure and structure → MS/MS spectrum operations on the same experimental data set. The effort involved and the success achieved in computer-aided interpretation, now underway, will be compared with the expert performance as described here.

The helical pitch formed by organic molecules, such as the α-helix of proteins, usually requires hydrogen bonding between chiral units and long-range positional order. It was recently found that certain liquid crystal oligomers can have a twist-bend nematic (NTB) phase with nanoscale heliconical structure without hydrogen bonding, molecular chirality or positional order. To understand the nature of this unique structure, here we present hard and resonant tender X-ray scattering studies of two novel sulfur containing dimer materials. We simultaneously measure the temperature dependences of the helical pitch and the correlation length of both the helical and positional order. In addition to an unexpected strong variation of the pitch with the length of the spacer connecting the monomer units, we find that at the transition to the NTB phase the positional correlation length drops. The helical structure was found not only in the NTB phase but observed even in the upper range of a smectic phase that forms just below the NTB state. The coexistence of smectic layering and the heliconical order indicates a layered (SmATB) phase wherein the rigid units of the dimers are tilted with respect to the smectic layer normal in order to accommodate the bent conformation of the dimers and the tilt direction rotates along the heliconical axis.

Methods for the rapid determination of enantiomeric excess (ee) in asymmetric synthetic methodology development are increasingly in demand as high-throughput experimentation protocols in academia and industry are adopted. Optical approaches have been reported, many of which rely on the use of chemical derivatization or molecular assemblies, resulting in UV/vis, fluorescence, or circular dichroism (CD) signals that report the ee values. While UV/vis and fluorescence approaches benefit from readily available 96- and 384-well plate readers, until recently, no CD plate readers existed. Herein, we report the utility of using the EKKO CD plate reader to analyze a chlorocoumarin amine derivatization methodology for the ee determination of a diverse set of chiral amines with an error margin within ±7%. Linear calibration curves of ee versus CD responses for each amine were obtained, the minimum detectable and quantifiable ee values were calculated, the technique was applied to an asymmetric hydrogenation, and various interferents expected to be present in crude samples are explored. The technique described herein is found to be suitable for high-throughput experimentation that requires a parallel and rapid ee determination step.

A high-throughput screening (HTS) approach for simultaneous analysis and quantification of the percent conversion of up to 48 reactions has been developed using a thin-layer chromatography (TLC) imaging method. As a test-bed reaction, we monitored 48 thiol conjugate additions to a Meldrum’s acid derivative (1) in parallel using TLC. The TLC elutions were imaged using a cell phone and a LEGO(™) brick-constructed UV/vis light box. Further, a spotting device was constructed from LEGO(™) bricks that allows simple transfer of the samples from a well-plate to the TLC plate. Using software that was developed to detect “blobs” and report their intensity, we were able to quantitatively determine the extent of completion of the 48 reactions with one analysis.

Precompetitive collaborations on the development of new enabling technologies for conducting pharmaceutical research and development are becoming increasingly popular as pharmaceutical companies re...

Professor William H. Pirkle (1934-2018) made a profound impact on modern chemistry by inventing and popularizing widely used techniques for the analysis and purification of enantiomers, contributions that paved the way for the subsequent advances in the discovery, development, and manufacture of enantiopure pharmaceuticals, agrochemicals, and specialty chemicals. Pirkle's pioneering 1966 demonstration of the use of chiral solvating agents for the nuclear magnetic resonance determination of enantiopurity led to a lifelong interest in understanding the supramolecular interactions responsible for enantiodifferentiation. Ongoing research into the chromatographic resolution of stereoisomers throughout the 1970s led in 1981 to the very first commercialization of a chiral stationary phase for the high-performance liquid chromatography (HPLC) separation of enantiomers. The availability of this and subsequent "Pirkle columns" had a deep and lasting impact, becoming widely embraced by the chemical sciences research community worldwide and spearheading the wholesale changeover to HPLC as the preferred technique for measuring enantiopurity. Doc Pirkle was a highly creative, independent, and fun-loving collaborator whose circle of friends extends around the globe. His research group at the University of Illinois, often referred to as The Pirkle Zoo, became a refuge for an interesting assembly of characters who flourished under his mentorship and guidance.

Microfluidic droplet sorting enables the high-throughput screening and selection of water-in-oil microreactors at speeds and volumes unparalleled by traditional well-plate approaches. Most such systems sort using fluorescent reporters on modified substrates or reactions that are rarely industrially relevant. We describe a microfluidic system for high-throughput sorting of nanoliter droplets based on direct detection using electrospray ionization mass spectrometry (ESI-MS). Droplets are split, one portion is analyzed by ESI-MS, and the second portion is sorted based on the MS result. Throughput of 0.7 samples s-1 is achieved with 98 % accuracy using a self-correcting and adaptive sorting algorithm. We use the system to screen ≈15 000 samples in 6 h and demonstrate its utility by sorting 25 nL droplets containing transaminase expressed in vitro. Label-free ESI-MS droplet screening expands the toolbox for droplet detection and recovery, improving the applicability of droplet sorting to protein engineering, drug discovery, and diagnostic workflows.

The amplification of molecular chirality by metal nanoparticles (NPs) is an important and rapidly evolving field in nanomaterial research with wide applications in smart materials, catalysis, and solvent–solute interactions. Here we present the results of the synthesis of gold nanoparticles (AuNPs) functionalized both with chiral ligands based on the binaphthol motif and with nematogenic groups (ChirAuLC). The materials were characterized chemically and the ratios between chiral groups and LC groups was determined. Synchrotron radiation circular dichroism (SRCD) and synchrotron based X-ray diffraction (XRD) studies show that the AuNPs favoured by the LC state arrange themselves into ordered columns and a helical superstructure appears in the mesophase of collective NPs. A specific focus has been the investigation of the chiral induction of ChirAuLC composites in two different nematic LC hosts. For a number of selected mixtures, the helical twisting power (HTP) of these NPs in systems was calculated from systematic optical observations based on optical polarizing microscopy (OPM). The experimental data show that the HTP of the investigated ChirAuLC composite is significantly larger than that of free “small molecule” chiral groups when dispersed in the same LC host and the chiral transfer efficiency of ChirAuLC is higher than NPs functionalized only with chiral groups (ChirAuNP). This is new and can be explained by a combination of a surface chirality and the domino effect of bound mesogens interacting with the bulk.

Many achiral bent molecules and some polymers with such repeat units exhibit a liquid crystal phase transition between a conventional nematic (N), and a second nematic (Nx) with periodically modulated orientation. Theory predicts several possible structures for the Nx phase, some of which are chiral (helical), and others achiral (e.g. zigzag). Experimentally distinguishing which modulation type is present is non-trivial and the structure is often assumed to be helical despite the other possibilities. Here we use circular dichroism (CD) spectroscopy to directly and unambiguously identify chirality in the Nx phase of two different dimer series, “DTC5Cn” and “CBCnCB”, which vary in (CH2)n spacer length (n = 5, 7, 9). In doing so we have determined that the modulation type is helical in all samples. The temperature dependence of the CD signal was also investigated, suggesting that the helical structure progressively unwinds on approach to the high temperature N phase.

Control of monoclonal antibody (mAb) concentrations in serum is important for maintaining the safety and efficacy of these lifesaving therapeutics. Point-of-care (POC) quantification of therapeutic mAbs could ensure that patients have effective mAb levels without compromising safety. This work uses mimotope-functionalized microporous alumina affinity membranes in vertical flow assays for detection and quantitation of therapeutic mAbs. Selective capture of bevacizumab from 1000:1 diluted serum or plasma and binding of a fluorescently labelled anti-human IgG secondary antibody enable fluorescence-based analysis of bevacizumab at its therapeutically relevant concentration range of ∼50-300 μg/mL. The assay results in a linear relationship between the fluorescence intensity of the antibody capture spot and the bevacizumab concentration. A simple prototype microfluidic device containing these membranes allows washing, reagent additions and visualization of signal within 15 min using a total of 5 mL of fluid. The prototype devices can monitor physiologically relevant bevacizumab levels in diluted serum, and future refinements might lead to a POC device for therapeutic drug monitoring.

Odd–even effects, oscillations in properties of materials comprised of an odd or even number of connected repeating units, are well-known phenomena in materials science. In organic materials, they are usually associated with the number of methylene groups in aliphatic chains. In this work, we unveil multiple signatures of a new odd–even effect in liquid crystals that occurs at the larger scale of molecular moieties that by themselves express liquid crystalline behavior. We demonstrate that oligomeric liquid crystals, with n = 1–4 number of rigid mesogenic segments connected by flexible aliphatic chains with an odd number of methylene groups, produce an odd–even effect in optical anisotropy and the bend elastic constant of the liquid crystal oligomer. This effect is different from the usual odd–even effects with respect to the parity of carbon atoms in an aliphatic chain and can be understood in term of the average molecular shape and the associations between n-mers based on the packing of these shapes. We also show that, in spite of the fact that there is no long-range electron density modulation, careful analysis of synchrotron SAXS results can provide important information about the molecular associations in the N and NTB phases that other techniques cannot access. This novel odd–even effect opens up a new mode to optimize phase and optical behavior.

We report dynamic light scattering measurements of the orientational (Frank) elastic constants and associated viscosities among a homologous series of a liquid crystalline dimer, trimer, and tetramer exhibiting a uniaxial nematic (N) to twist-bend nematic (NTB) phase transition. The elastic constants for director splay (K11), twist (K22) and bend (K33) exhibit the relations K11 > K22 > K33 and K11/K22 > 2 over the bulk of the N phase. Their behavior near the N–NTB transition shows dependency on the parity of the number (n) of the rigid mesomorphic units in the flexible n-mers. Namely, the bend constant K33 in the dimer and tetramer turns upward and starts increasing close to the transition, following a monotonic decrease through most of the N phases. In contrast, K33 for the trimer flattens off just above the transition and shows no pretransitional enhancement. The twist constant K22 increases pretransitionally in both even and odd n-mers, but more weakly so in the trimer, while K11 increases steadily on cooling without evidence of pretransitional behavior in any n-mer. The viscosities associated with pure splay, twist-dominated twist-bend, and pure bend fluctuations in the N phase are comparable in magnitude to those of rod-like monomers. All three viscosities increase with decreasing temperature, but the bend viscosity in particular grows sharply near the N–NTB transition. The N–NTB pretransitional behavior is shown to be in qualitative agreement with the predictions of a coarse-grained theory, which models the NTB phase as a “pseudo-layered” structure with the symmetry (but not the mass density wave) of a smectic-A* phase.

High throughput experimentation has become widely used in the discovery and development of new medicines. Progress in the field relies on an interplay between high throughput experimentation and high throughput analysis technologies. In this perspective, a personal account of the evolution of high throughput analysis and the role that measurement science has played in enabling the success of high throughput experimentation is presented, along with an assessment of current challenges and future prospects.

Fourier-transform infrared polarized spectroscopy was employed, to obtain the three components of the infrared absorbance for a series of bent-shaped dimers containing double fluorinated terphenyl core (DTC5Cn, n = 5, 7, 9, 11). The data were used to calculate both uniaxial and biaxial order parameters, for various molecular groups of dimers. The molecule bend was estimated based on the observed differences between the uniaxial order parameters for the terphenyl core and central hydrocarbon linker. The orientational order, distinctly reverses its monotonic trend of increase to decrease at the transition temperature, from the uniaxial nematic to the twist-bend nematic phase as result of the director tilt in latter/(twist-bend) phase. The molecular biaxiality, which is negligible in the nematic phase, starts increasing on entering the twist-bend nematic phase, following a sin-square relationships with the tilt angle. The local director curvature is found to be controlled by the molecular biaxiality parameter.

The relationship between the molecular structure and the formation of the NTB phase is still at an early stage of development. This is mainly related to molecular geometry, while the correlation between the NTB phase and the electronic structure is ambiguous. To explore the electronic effect on properties and stabilization of the NTB phase we investigated 2,3-difluoro-4,4-dipentyl-p-terphenyl dimers (DTC5Cn). We used IR polarized spectroscopy, which can at least in principle, bring information about the ordering in NTB phase. All dimers show a significant drop of the average value of the transition dipole moment d{\mu}/dQ for parallel dipoles at the transition to the NTB phase, and an increase for perpendicular dipoles, despite its remaining unchanged for the monomer. These results coincide well with DFT simulations of vibrational dipole derivatives for molecules assembled in pseudo-layers of the NTB phase. The DFT calculations were used to determine the geometric and electronic properties of the hydrogen bonded complexes. We have provided experimental and theoretical evidence of stabilization of the NTB phase by arrays of multiple hydrogen bonds (XF...HX, X-benzene ring)., Comment: 14 pages, 9 figures

We present two configurations for analog 0 to 2π optical phase modulation using liquid crystals (LCs), each of which achieve switching times that are 1 ms or less. One configuration is based on the switching behavior of a so-called nematic pi cell, and the other is based on the flexoelectro-optic effect in chiral nematic LCs when operated in the uniform lying helix geometry. Both configurations exploit a multipass optical arrangement to enhance the available optical phase range, while maintaining a fast switching speed. Moreover, these devices can be operated at or close to room temperature. Experimental data are found to be in good agreement with results predicted from theory for these multipass phase-modulation configurations.

In this paper, we demonstrate a flexoelectro-optic liquid crystal phase-only device that uses a chiral nematic reflector to achieve full 2π phase modulation. This configuration is found to be very tolerant to imperfections in the chiral nematic reflector provided that the flexoelectro-optic LC layer fulfils the half-wave condition. Encouragingly, the modulation in the phase, which operates at kHz frame rates, is also accompanied by low amplitude modulation. The configuration demonstrated herein is particularly promising for the development of next-generation liquid crystal on silicon spatial light modulators.

We have solved the long-standing problems of stability and hysteresis, and we are able to obtain the homogeneous uniform lying helix structure in polymer-free cholesteric liquid crystals. This is instrumental for the present work to demonstrate the analog modulation at high speed and high precision. The device is configured for the transverse field switching wherein the substrate surface is flat. In addition to the response time of 10 ms at room temperature, we have obtained the R-squared and the adjusted R-squared as a measure of true sine wave for the sinusoidal responding transmissions from 1 Hz to 100 kHz that are all greater than 0.9993. In a Michelson interferometer, the phase shift at wavelength 633 nm after two passes has been measured to be equal to about π / 9 at 4.6 V/µm for the chiral-doped nematic mixtures E7.

We have demonstrated a Liquid crystal (LC) analog phase modulator based on the flexoelectric-optic effect that can achieve full 2π phase modulation with sub-millisecond switching speed. The LC mixture in the device consists of the bimesogen CBC7CB with chiral dopant R5011 that can exhibit ±𝜋/4 rotation of the optic axis for an electric field of ±4.2Vμm^(-1). This is then converted to a ±π phase modulation with the aid of a chiral reflector and a quarter waveplate. The residual amplitude modulation is found to be very low, and we show how these elements can be combined to form a integrated device.

Elastic moduli of liquid crystals, known as Frank constants, are of quintessential importance for understanding fundamental properties of these materials and for the design of their applications. Although there are many methods to measure the Frank constants in the nematic phase, little is known about the elastic constants of the chiral version of the nematic, the so-called cholesteric liquid crystal, since the helicoidal structure of the cholesteric renders these methods inadequate. Here we present a technique to measure the bend modulus K33 of cholesterics that is based on the electrically tunable reflection of light at an oblique helicoidal ChOH cholesteric structure. K33 is typically smaller than 0.6 pN, showing a nonmonotonous temperature dependence with a slight increase near the transition to the twist-bend phase. K33 depends strongly on the molecular composition. In particular, chiral mixtures that contain the flexible dimer 1′′,7′′-bis(4-cyanobiphenyl-4′-yl) heptane (CB7CB) and rodlike molecules such as pentylcyanobiphenyl (5CB) show a K33 value that is 5 times smaller than K33 of pure CB7CB or of mixtures of CB7CB with chiral dopants. Furthermore, K33 in CB11CB doped with a chiral agent is noticeably smaller than K33 in a similarly doped CB7CB which is explained by the longer flexible link in CB11CB. The proposed technique allows a direct in-situ determination of how the molecular composition, molecular structure and molecular chirality affect the elastic properties of chiral liquid crystals.

The determination of the enantiopurity and the concentration of chiral compounds by chiroptical sensing with molecular probes is increasingly attractive for high-throughput screening applications including streamlined asymmetric reaction development. In this study, we use stereodynamic aluminum biphenolate complexes for quantitative ee and concentration analysis of amino alcohols and α-hydroxy acids. An important feature of the tropos biphenolate ligand used is the presence of a phenylacetylene antenna for optimal chirality recognition and CD/UV responses at high wavelengths. The complexation-driven chirality amplification yields strong CD signals, which allows quantitative chiroptical sensing with good accuracy. We show that aluminate biphenolate sensors can exhibit linear and nonlinear correlations between the induced CD signals and the enantiomeric composition or concentration of the chiral substrate.

International audience; Predicting whether a chiral column will be effective is a daily task for many analysts. Moreover, finding the best chiral column for separating a particular racemic compound is mostly a matter of trial and error that may take up to a week in some cases. In this study we have developed a novel prediction approach based on combining a random forest classifier and an optimized discretization method for dealing with enantioselectivity as a continuous variable. Using the optimization results, models were trained on data sets divided into four enantioselectivity classes. The best model performances were achieved by over-sampling the minority classes (α ≤ 1.10 and α ≥ 2.00), down-sampling the majority class (1.2 ≤ α < 2.0), and aggregating multicategory predictions into binary classifications. We tested our method on 41 chiral stationary phases using layered fingerprints as descriptors. Experimental results show that this learning methodology was successful in terms of average area under the Receiver Operating Characteristic curve, Kappa indices and F-measure for structure-based prediction of the enantioselective behavior of 34 chiral columns.

A survey of different strategies for chromatographic method development in pharmaceutical research and development is presented. Owing to the widespread utilization of chromatography within diverse areas of pharmaceutical research, a variety of strategies for method development have arisen. We survey the current state of the art, discuss recent trends and approaches and highlight future prospects and capability gaps.

The chemical analysis of hop-derived humulone and isohumulone components in hops and beer was investigated using multiple injections in a single experimental run (MISER) extracted ion LC-MS. Compar...

Direct MISER (Multiple Injections in a Single Experimental Run) chromatographic analysis can afford easy to interpret kinetic profiles of chemical reactions without the need for peak integration, data input or graphing. Several examples are presented illustrating how this approach can provide researchers with straightforward access to information-rich kinetic reaction profiles.

A novel approach to produce chiral diaryl sulfoxides from aryl benzyl sulfoxides and aryl bromides via an enantioselective arylation of aryl sulfenate anions is reported. A (JosiPhos)Pd-based catalyst successfully promotes the asymmetric arylation reaction with good functional group compatibility. A wide range of enantioenriched diaryl, aryl heteroaryl, and even diheteroaryl sulfoxides were generated. Many of the sulfoxides prepared herein would be difficult to prepare via classic enantioselective oxidation of sulfides, including Ph(Ph-d5)SO (90% ee, 95% yield). A DFT-based computational study suggested that chiral induction originates from two primary factors: (i) both a kinetic and a thermodynamic preference for oxidative addition that places the bromide trans to the JosiPhos-diarylphosphine moiety and (ii) Curtin-Hammett-type control over the interconversion between O- and S-bound isomers of palladium sulfenate species following rapid interconversion between re- and si-bound transmetalation products, re/si-Pd-OSPh (re/si-PdO-trans). Fil: Jia, Tiezheng. University of Pennsylvania; Estados Unidos Fil: Zhang, Mengnan. University of Pennsylvania; Estados Unidos Fil: McCollom, Samuel P.. University of Pennsylvania; Estados Unidos Fil: Bellomo Peraza, Ana Ines. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Centro de Investigaciones en Bionanociencias ; Argentina Fil: Montel, Sonia. University of Pennsylvania; Estados Unidos Fil: Mao, Jianyou. Nanjing Tech University; República de China Fil: Dreher, Spencer D.. Merck & Company; Estados Unidos Fil: Welch, Christopher J.. Merck & Company; Estados Unidos Fil: Regalado, Erik L.. Merck & Company; Estados Unidos Fil: Williamson, R. Thomas. Merck & Company; Estados Unidos Fil: Manor, Brian C.. Merck & Company; Estados Unidos Fil: Tomson, Neil C.. University of Pennsylvania; Estados Unidos Fil: Walsh, Patrick J.. University of Pennsylvania; Estados Unidos

The combination of high speed autosampler technology and ultrafast chromatographic separations enables faster high throughput analysis. With an injection cycle time of 10.6 s, MISER (Multiple Injection in a Single Experimental Run) HPLC-MS analysis of a 96 well microplate can be completed in only 17min. As chromatographic separations in the sub 5s range become increasingly common, even faster autosamplers will be needed to realize further speed improvements in high throughput LC-MS analysis. Indeed with proper hardware sampling approaches, chromatographic analysis of microplates could approach speeds of spectrophotometric plate readers while maintaining the advantage of multicomponent detection and monitoring.

The creation of the Enabling Technologies Consortium (ETC) is described. The ETC fosters precompetitive collaborations aimed at the development and evaluation of new enabling technologies for pharmaceutical research and development, with an initial focus on chemistry, manufacturing, and controls. An overview of the structure and function of the new organization, which will carry out its work while remaining mindful of antitrust compliance requirements, is herein presented along with a description of several ongoing development projects.

Chromatographic separation and analysis of complex mixtures of closely related species is one of the most challenging tasks in modern pharmaceutical analysis. In recent years, two-dimensional liquid chromatography (2D-LC) has become a valuable tool for improving peak capacity and selectivity. However, the relatively slow speed of chiral separations has limited the use of chiral stationary phases (CSPs) as the second dimension in 2D-LC, especially in the comprehensive mode. Realizing that the recent revolution in the field of ultrafast enantioselective chromatography could now provide significantly faster separations, we herein report an investigation into the use of ultrafast chiral chromatography as a second dimension for 2D chromatographic separations. In this study, excellent selectivity, peak shape, and repeatability were achieved by combining achiral and chiral narrow-bore columns (2.1 mm × 100 mm and 2.1 mm × 150 mm, sub-2 and 3 μm) in the first dimension with 4.6 mm × 30 mm and 4.6 mm × 50 mm columns packed with highly efficient chiral selectors (sub-2 μm fully porous and 2.7 μm fused-core particles) in the second dimension, together with the use of 0.1% phosphoric acid/acetonitrile eluents in both dimensions. Multiple achiral × chiral and chiral × chiral 2D-LC examples (single and multiple heart-cutting, high-resolution sampling, and comprehensive) using ultrafast chiral chromatography in the second dimension are successfully applied to the separation and analysis of complex mixtures of closely related pharmaceuticals and synthetic intermediates, including chiral and achiral drugs and metabolites, constitutional isomers, stereoisomers, and organohalogenated species.

An investigation is reported on the use of the autocatalytic enantioselective Soai reaction, known to be influenced by the presence of a wide variety of chiral materials, as a generic tool for measuring the enantiopurity and absolute configuration of any substance. Good generality for the reaction across a small group of test analytes was observed, consistent with literature reports suggesting a diversity of compound types that can influence the stereochemical outcome of this reaction. Some trends in the absolute sense of stereochemical enrichment were noted, suggesting the possible utility of the approach for assigning absolute configuration to unknown compounds, by analogy to closely related species with known outcomes. Considerable variation was observed in the triggering strength of different enantiopure materials, an undesirable characteristic when dealing with mixtures containing minor impurities with strong triggering strength in the presence of major components with weak triggering strength. A strong tendency of the reaction toward an 'all or none' type of behavior makes the reaction most sensitive for detecting enantioenrichment close to zero. Consequently, the ability to discern modest from excellent enantioselectivity was relatively poor. While these properties limit the ability to obtain precise enantiopurity measurements in a simple single addition experiment, prospects may exist for more complex experimental setups that may potentially offer improved performance.

Temperature dependent inversion of enantioselectivity in asymmetric catalysis is an interesting and somewhat unusual phenomenon. We have observed temperature dependent inversion of enantioselectivity in the asymmetric autocatalysis reaction when triggered by a wide scope of enantioenriched alcohols and amines. The addition reaction of diisopropylzinc to pyrimidine-5-carbaldehyde in the presence of enantiopure alcohols or amines affords the pyrimidyl alkanol product at 0 °C with high ee. However, lowering the reaction temperature to -44 °C affords the opposite enantioselectivity.

The quadrupolar splittings of perdeuteriated n-decane dissolved in nematic phases formed by mesogenic dimers of the CBnCB series, for n=7,9,10,11 are measured throughout the entire temperature range of these phases. The results of the measurements, are reported together with related measurements using the common nematic phase of 5CB as a solvent for n-decane. The data obtained from the $^{13}$C spectra of the cyanobiphenyl mesogenic units of the monomeric and dimeric solvent molecules yield the order parameter of those units. The information obtained from this set of experiments is used to elucidate the structure of the low temperature (N$_X$) and the high temperature (N) nematic phases of CBnCB dimers with n=7,9,11. The polar twisted nematic (N$_{PT}$) model is found to provide a consistent description not only of these measurements, but also of NMR measurements previously reported in the literature for these phases. These findings suggest that the high temperature nematic (N) is not a common, locally uniaxial and apolar nematic, but rather a nematic phase consisting of N$_{PT}$ clusters. The twist-bend (N$_{TB}$) model, often identified with the N$_X$ phase, is shown to be inadequate to account even qualitatively for crucial features of the experimental findings., Comment: 41 pages, 8 figures, 1 appendix, supplementary material

Averaging of chromatograms can lead to enhancement of signal to noise ratio (S/N) in proportion to the square root of the number of measurements. Although the general principle has been known for decades, chromatogram averaging is almost never used in current pharmaceutical research. In this study we explore the utility of this approach, showing it to be a simple and easily accessible method for boosting sensitivity for quantification of minor components and trace impurities, where current techniques deliver insufficient S/N.

The recently developed technology of droplet microfluidics has demonstrated great potential for many applications such as biochemical assay, high throughput screening, cell culture, directed evolution, and chemical synthesis. Intrigued by its capabilities for miniaturization, flexible manipulation, rapid reagent mixing and high throughput experimentation and analysis, the pharmaceutical industry has begun to investigate droplet microfluidic implementation in medicinal and process chemistry. Segmented by an immiscible secondary phase, usually perfluorinated oil, aqueous or organic droplets serve as individual micro-reactors without suffering cross-contamination. As many drug molecules contain fluorines, it is necessary to investigate whether such compounds will be preferentially extracted into the fluorous phase via fluorophilic solvation, which could lead to erroneous analytical results. In this work, we chose drugs with up to 10 fluorines to probe their partition into perfluorodecalin (PFD) from a variety of organic solvents. A fast and straightforward MISER (Multiple Injections in a Single Experimental Run) LC-MS method was applied to measure the loss of drug after mixing with PFD. We found that no significant partition occurred, with the concentration of drugs in the 'experimental' group measured as ±10% of the 'control' group. The RSD% of multiple injections is

An overview of recent progress in the development of compact mass spectrometers for use as chromatographic detectors in chemical analysis is presented. As the applications of LC-MS technologies have grown in recent years there has been a continued expansion of the approach to new user groups. Within the pharmaceutical industry, the recent development of small, inexpensive and quiet MS detectors for LC has enabled the rollout of this important technology well beyond the initial user base of researchers in drug metabolism and bioanalysis to the direct support of research areas such as discovery chemistry, process chemistry, chemical engineering, manufacturing and formulation sciences, with comparable broadening of the MS user base occurring in other industries and in academia. In this review we survey recent developments and applications ranging from reaction monitoring, biomolecule analysis and high-throughput microplate analysis to the identification and analysis of impurities, degradation products and potential mutagens, offering thoughts on current limitations and future directions.

Proof of principle is demonstrated for a novel approach for using pressurized liquid carbon dioxide (CO2) as a mobile phase for flash chromatography purification, rather than traditionally used organic solvents. Regulation of a pressurized CO2 supply line rather than specialized and expensive CO2 pumps and chillers typically used in supercritical fluid chromatography applications greatly simplifies operations while reducing costs. Evaluation of a prototype instrument reveals encouraging purification, recovery, and reduction in organic solvent usage.

The solutes dideuterium, 1,3,5-trichlorobenzene and p-dichlorobenzene (pdcb) are co-dissolved in a 61/39 wt% mixture of CBC9CB/5CB, a bimesogenic liquid crystal with two nematic phases. NMR spectra are collected for each solute. The local electric field gradient ( F ZZ ) is obtained from the dideuterium spectrum. A double Maier-Saupe potential (MSMS) is used to rationalize the order parameters of pdcb. The liquid-crystal fields G 1 and G 2 are taken to be due to size and shape interactions and interactions between the solute molecular quadrupole and the mean F ZZ of the medium. The F ZZ ’s obtained from D2 and G 2 (from pdcb) are compared and discussed.

Multiple-injection techniques have been shown to be a simple way to perform high-throughput analysis where the entire experiment resides in a single chromatogram, simplifying the data analysis and interpretation. In this study, multiple-injection techniques are applied to gas chromatography with flame ionization detection and mass detection to significantly increase sample throughput. The unique issues of implementing a traditional "Fast" injection mode of multiple-injection techniques with gas chromatography and mass spectrometry are discussed. Stacked injections are also discussed as means to increase the throughput of longer methods where mass detection is unable to distinguish between analytes of the same mass and longer retentions are required to resolve components of interest. Multiple-injection techniques are shown to increase instrument throughput by up to 70% and to simplify data analysis, allowing hits in multiple parallel experiments to be identified easily.

Speeding the analysis of reaction aliquots, high-performance liquid chromatography (HPLC) fractions and final products continue to be an area of great interest in the study of radiopharmaceuticals. Translating recently developed rapid HPLC and ultra high-performance liquid chromatography analysis approaches to radio-HPLC can sometimes be fraught with peril, owing to specific peculiarities of online radiochemical chromatographic detection (notably, a proportionally large system volume for the radio-HPLC detector). In this study, we investigate an alternate approach for rapid radio-HPLC analysis where a 150-cm C18 monolithic column is used with a 15-min run time. To ascertain this method's ability to distinguish between radiolabeled compounds with acceptable (≥97%) and unacceptable purity, the results were compared with results from a conventional HPLC 45-min method using a 25-cm C18 column, where a large radiodetector cell volume is of lower impact. Overall, for the 54 radiolabeled compounds assayed by the two methods, there were similar measured radiochemical purities, but cases were also found where there were significantly large differences between the results (>1%). A calculated confidence of ~85% was found for the 15-min monolithic method's ability to accurately reproduce the corresponding result from the 25-cm column method.

As new chemical methodologies driven by single-electron chemistry emerge, process and analytical chemists must develop approaches to rapidly solve problems in this nontraditional arena. Electron paramagnetic resonance spectroscopy has been long known as a preferred technique for the study of paramagnetic species. However, it is only recently finding application in contemporary pharmaceutical development, both to study reactions and to track the presence of undesired impurities. Several case studies are presented here to illustrate its utility in modern pharmaceutical development efforts.

Supercritical fluid chromatography (SFC) has long been a preferred method for enantiopurity analysis in support of pharmaceutical discovery and development, but implementation of the technique in regulated GMP laboratories has been somewhat slow, owing to limitations in instrument sensitivity, reproducibility, accuracy and robustness. In recent years, commercialization of next generation analytical SFC instrumentation has addressed previous shortcomings, making the technique better suited for GMP analysis. In this study we investigate the use of modern SFC for enantiopurity analysis of several pharmaceutical intermediates and compare the results with the conventional HPLC approaches historically used for analysis in a GMP setting. The findings clearly illustrate that modern SFC now exhibits improved precision, reproducibility, accuracy and robustness; also providing superior resolution and peak capacity compared to HPLC. Based on these findings, the use of modern chiral SFC is recommended for GMP studies of stereochemistry in pharmaceutical development and manufacturing.