Search

The young (50-400 Myr) A3V star $\beta$ Leo is a primary target to study the formation history and evolution of extrasolar planetary systems as one of the few stars with known hot ($\sim$1600$^\circ$K), warm ($\sim$600$^\circ$K), and cold ($\sim$120$^\circ$K) dust belt components. In this paper, we present deep mid-infrared measurements of the warm dust brightness obtained with the Large Binocular Telescope Interferometer (LBTI) as part of its exozodiacal dust survey (HOSTS). The measured excess is 0.47\%$\pm$0.050\% within the central 1.5 au, rising to 0.81\%$\pm$0.026\% within 4.5 au, outside the habitable zone of $\beta$~Leo. This dust level is 50 $\pm$ 10 times greater than in the solar system's zodiacal cloud. Poynting-Robertson drag on the cold dust detected by Spitzer and Herschel under-predicts the dust present in the habitable zone of $\beta$~Leo, suggesting an additional delivery mechanism (e.g.,~comets) or an additional belt at $\sim$5.5 au. A model of these dust components is provided which implies the absence of planets more than a few Saturn masses between $\sim$5 au and the outer belt at $\sim$40 au. We also observationally constrain giant planets with the LBTI imaging channel at 3.8~$\mu$m wavelength. Assuming an age of 50 Myr, any planet in the system between approximately 5 au to 50 au must be less than a few Jupiter masses, consistent with our dust model. Taken together, these observations showcase the deep contrasts and detection capabilities attainable by the LBTI for both warm exozodiacal dust and giant exoplanets in or near the habitable zone of nearby stars., Comment: 11 pages, 9 figures, accepted for publication in Astronomical Journal

We present the design and testing of FOURIER, the first generation science beam combiner for the MROI. FOURIER is a three-way, J, H and K band image plane combiner which is designed primarily for observations at faint limiting magnitudes. We outline the main science requirements and discuss how the design of FOURIER contributes to meeting these requirements. We present the first laboratory characterisation of the instrument including validation of the PSF profile, demonstration of high contrast fringes, and the spectral resolution of the instrument, all of which show promising results. We conclude by discussing the path to deployment of FOURIER at the MROI ahead of the first science observation at the array.

The Multi Object Optical and Near-infrared Spectrograph (MOONS) instrument is the next generation multi-object spectrograph for the VLT. This powerful instrument will combine for the first time: the large collecting power of the VLT with a high multipexing capability offered by 1000 optical fibres moved with individual robotic positioners and a novel, very fast spectrograph able to provide both low- and high-resolution spectroscopy simultaneously across the wavelength range 0.64μm - 1.8μm. Such a facility will provide the astronomical community with a powerful, world-leading instrument able to serve a wide range of Galactic, Extragalactic and Cosmological studies. Th final assembly, integration and verification phase of the instrument is now about to start performance testing.

The Magdalena Ridge Observatory Interferometer (MROI) is designed to operate 10 1.4m telescopes simultaneously, with baselines ranging from 7.8-347 m and limiting infrared fringe-tracking magnitudes of 14 – it is arguably the most ambitious optical/infrared imaging interferometer under construction today. In this paper we had intended to present an update of activities since the 2018 SPIE meeting as we approached a demonstration of first fringes with the facility originally anticipated for the fall of 2020. However, due to the global pandemic and a loss of funding for our project via AFRL, we have been unable to make the progress we intended. In this paper, we present results up through March, 2020 and a brief discussion of the path forward for the facility.

The first unit telescope of Ridge Observatory Interferometer is integrated on the array and starlight has been observed in the Beam Combining Area for the first time. From the telescope, the beam travels in vacuum over a path of >50m, including a beam relay system and delay line. This feat was made possible by a prototype version of the Automated Alignment System that we are developing for minimising fringe visibility loss due to misalignment. We present results of on-site validation of UTLIS, a reference light source at the unit telescope acting as a proxy for starlight, and BEASST, a Shack-Hartmann sensor that simultaneously detects beam angle and position.

The Large Binocular Telescope Interferometer (LBTI) enables nulling interferometric observations across the N band (8 to 13 um) to suppress a star's bright light and probe for faint circumstellar emission. We present and statistically analyze the results from the LBTI/HOSTS (Hunt for Observable Signatures of Terrestrial Systems) survey for exozodiacal dust. By comparing our measurements to model predictions based on the Solar zodiacal dust in the N band, we estimate a 1 sigma median sensitivity of 23 zodis for early type stars and 48 zodis for Sun-like stars, where 1 zodi is the surface density of habitable zone (HZ) dust in the Solar system. Of the 38 stars observed, 10 show significant excess. A clear correlation of our detections with the presence of cold dust in the systems was found, but none with the stellar spectral type or age. The majority of Sun-like stars have relatively low HZ dust levels (best-fit median: 3 zodis, 1 sigma upper limit: 9 zodis, 95% confidence: 27 zodis based on our N band measurements), while ~20% are significantly more dusty. The Solar system's HZ dust content is consistent with being typical. Our median HZ dust level would not be a major limitation to the direct imaging search for Earth-like exoplanets, but more precise constraints are still required, in particular to evaluate the impact of exozodiacal dust for the spectroscopic characterization of imaged exo-Earth candidates., Comment: accepted for publication in AJ

After completion of its final-design review last year, it is full steam ahead for the construction of the MOONS instrument - the next generation multi-object spectrograph for the VLT. This remarkable instrument will combine for the first time: the 8 m collecting power of the VLT, 1000 optical fibres with individual robotic positioners and both medium- and high-resolution spectral coverage acreoss the wavelength range 0.65μm - 1.8 μm. Such a facility will allow a veritable host of Galactic, Extragalactic and Cosmological questions to be addressed. In this paper we will report on the current status of the instrument, details of the early testing of key components and the major milestones towards its delivery to the telescope.

The Magdalena Ridge Observatory Interferometer (MROI) has been under development for almost two decades. Initial funding for the facility started before the year 2000 under the Army and then Navy, and continues today through the Air Force Research Laboratory. With a projected total cost of substantially less than $200M, it represents the least expensive way to produce sub-milliarcsecond optical/near-infrared images that the astronomical community could invest in during the modern era, as compared, for instance, to extremely large telescopes or space interferometers. The MROI, when completed, will be comprised of 10 x1.4m diameter telescopes distributed on a Y-shaped array such that it will have access to spatial scales ranging from about 40 milliarcseconds down to less than 0.5 milliarcseconds. While this type of resolution is not unprecedented in the astronomical community, the ability to track fringes on and produce images of complex targets approximately 5 magnitudes fainter than is done today represents a substantial step forward. All this will be accomplished using a variety of approaches detailed in several papers from our team over the years. Together, these two factors, multiple telescopes deployed over very long-baselines coupled with fainter limiting magnitudes, will allow MROI to conduct science on a wide range and statistically meaningful samples of targets. These include pulsating and rapidly rotating stars, mass-loss via accretion and mass-transfer in interacting systems, and the highly-active environments surrounding black holes at the centers of more than 100 external galaxies. This represents a subsample of what is sure to be a tremendous and serendipitous list of science cases as we move ahead into the era of new space telescopes and synoptic surveys. Additional investigations into imaging man-made objects will be undertaken, which are of particular interest to the defense and space-industry communities as more human endeavors are moved into the space environment. In 2016 the first MROI telescope was delivered and deployed at Magdalena Ridge in the maintenance facility. Having undergone initial check-out and fitting the system with optics and a fast tip-tilt system, we eagerly anticipate installing the telescope enclosure in 2018. The telescope and enclosure will be integrated at the facility and moved to the center of the interferometric array by late summer of 2018 with a demonstration of the performance of an entire beamline from telescope to beam combiner table shortly thereafter. At this point, deploying two more telescopes and demonstrating fringe-tracking, bootstrapping and limiting magnitudes for the facility will prove the full promise of MROI. A complete status update of all subsystems follows in the paper, as well as discussions of potential collaborative initiatives.

The ICoNN (Infrared Coherencing Nearest Neighbors) fringe tracker system is the heart of the Magdalena Ridge Observatory Interferometer (MROI). It operates in the near-infrared at H or Ks in such a way that the light being used by the fringe tracker can phase up the interferometric array, but not steal photons from the scientific instruments of the interferometer system. It is capable of performing either in group delay tracking or fringe phase tracking modes, depending on the needs of the scientific observations. The spectrograph for the MROI beam combiner was originally designed for the Teledyne PICNIC array. Developments in detector technology have allowed for an alternative to the original choice of infrared array to finally become available – in particular, the SAPHIRA detector made by Selex. Very low read noise and very fast readout rates are significant reasons for adopting these new detectors, traits which also allow relaxation of some of the opto-mechanical requirements that were needed for the PICNIC chip to achieve marginal sensitivity. This paper will discuss the opto-mechanical advantages and challenges of using the SAPHIRA detector with the pre-existing hardware. In addition to a design for supporting the new detector, alignment of optical components and initial testing as a system are reported herein.

Interferometry provides the only practicable way to image satellites in Geosynchronous Earth Orbit (GEO) with sub-meter resolution. The Magdalena Ridge Observatory Interferometer (MROI) is being funded by the US Air Force Research Laboratory to deploy the central three unit telescopes in order to demonstrate the sensitivity and baseline-bootstrapping capability needed to observe GEO targets. In parallel, we are investigating the resolution and imaging fidelity that is achievable with larger numbers of telescopes. We present imaging simulations with 7- and 10- telescope deployments of the MROI, and characterize the impact of realistic spectral variations compared with a “gray” satellite.

The Planet Formation Imager (PFI) is a near- and mid-infrared interferometer project with the driving science goal of imaging directly the key stages of planet formation, including the young proto-planets themselves. Here, we will present an update on the work of the Science Working Group (SWG), including new simulations of dust structures during the assembly phase of planet formation and quantitative detection efficiencies for accreting and non-accreting young exoplanets as a function of mass and age. We use these results to motivate two reference PFI designs consisting of a) twelve 3m telescopes with a maximum baseline of 1.2km focused on young exoplanet imaging and b) twelve 8m telescopes optimized for a wider range of young exoplanets and protoplanetary disk imaging out to the 150K H2O ice line. Armed with 4x8m telescopes, the ESO/VLTI can already detect young exoplanets in principle and projects such as MATISSE, Hi-5 and Heimdallr are important PFI pathfinders to make this possible. We also discuss the state of technology development needed to make PFI more affordable, including progress towards new designs for inexpensive, small field-of-view, large aperture telescopes and prospects for Cubesat-based space interferometry., Comment: Presented at 2018 SPIE Astronomical Telescopes + Instrumentation, Austin, Texas, USA. See www.planetformationimager.org for more information

The HOSTS (Hunt for Observable Signatures of Terrestrial Systems) survey searches for dust near the habitable zones (HZs) around nearby, bright main sequence stars. We use nulling interferometry in N band to suppress the bright stellar light and to probe for low levels of HZ dust around the 30 stars observed so far. Our overall detection rate is 18%, including four new detections, among which are the first three around Sun-like stars and the first two around stars without any previously known circumstellar dust. The inferred occurrence rates are comparable for early type and Sun-like stars, but decrease from 60 (+16/-21)% for stars with previously detected cold dust to 8 (+10/-3)% for stars without such excess, confirming earlier results at higher sensitivity. For completed observations on individual stars, our sensitivity is five to ten times better than previous results. Assuming a lognormal excess luminosity function, we put upper limits on the median HZ dust level of 13 zodis (95% confidence) for a sample of stars without cold dust and of 26 zodis when focussing on Sun-like stars without cold dust. However, our data suggest that a more complex luminosity function may be more appropriate. For stars without detectable LBTI excess, our upper limits are almost reduced by a factor of two, demonstrating the strength of LBTI target vetting for future exo-Earth imaging missions. Our statistics are so far limited and extending the survey is critical to inform the design of future exo-Earth imaging surveys., 26 pages, 7 figures, 5 tables, accepted for publication by AJ

The presence of large amounts of dust in the habitable zones of nearby stars is a significant obstacle for future exo-Earth imaging missions. We executed the HOSTS (Hunt for Observable Signatures of Terrestrial Systems) survey to determine the typical amount of such exozodiacal dust around a sample of nearby main sequence stars. The majority of the data have been analyzed and we present here an update of our ongoing work. Nulling interferometry in N band was used to suppress the bright stellar light and to detect faint, extended circumstellar dust emission. We present an overview of the latest results from our ongoing work. We find seven new N band excesses in addition to the high confidence confirmation of three that were previously known. We find the first detections around Sun-like stars and around stars without previously known circumstellar dust. Our overall detection rate is 23%. The inferred occurrence rate is comparable for early type and Sun-like stars, but decreases from 71+11 -20% for stars with previously detected mid- to far-infrared excess to 11+9 -4% for stars without such excess, confirming earlier results at high confidence. For completed observations on individual stars, our sensitivity is five to ten times better than previous results. Assuming a lognormal luminosity function of the dust, we find upper limits on the median dust level around all stars without previously known mid to far infrared excess of 11.5 zodis at 95% confidence level. The corresponding upper limit for Sun-like stars is 16 zodis. An LBTI vetted target list of Sun-like stars for exo-Earth imaging would have a corresponding limit of 7.5 zodis. We provide important new insights into the occurrence rate and typical levels of habitable zone dust around main sequence stars. Exploiting the full range of capabilities of the LBTI provides a critical opportunity for the detailed characterization of a sample of exozodiacal dust disks to understand the origin, distribution, and properties of the dust.

The first generation of E-ELT instruments will include an optical-infrared High Resolution Spectrograph, conventionally indicated as EELT-HIRES, which will be capable of providing unique breakthroughs in the fields of exoplanets, star and planet formation, physics and evolution of stars and galaxies, cosmology and fundamental physics. A 2-year long phase A study for EELT-HIRES has just started and will be performed by a consortium composed of institutes and organisations from Brazil, Chile, Denmark, France, Germany, Italy, Poland, Portugal, Spain, Sweden, Switzerland and United Kingdom. In this paper we describe the science goals and the preliminary technical concept for EELT-HIRES which will be developed during the phase A, as well as its planned development and consortium organisation during the study., 12 pages, in Ground-based and Airborne Instrumentation for Astronomy VI, 2016, Proc. SPIE 9908, 23

NASA has funded a project called the Hunt for Observable Signatures of Terrestrial Systems (HOSTS) to survey nearby solar type stars to determine the amount of warm zodiacal dust in their habitable zones. The goal is not only to determine the luminosity distribution function but also to know which individual stars have the least amount of zodiacal dust. It is important to have this information for future missions that directly image exoplanets as this dust is the main source of astrophysical noise for them. The HOSTS project utilizes the Large Binocular Telescope Interferometer (LBTI), which consists of two 8.4-m apertures separated by a 14.4-m baseline on Mt. Graham, Arizona. The LBTI operates in a nulling mode in the mid-infrared spectral window (8-13 μm), in which light from the two telescopes is coherently combined with a 180 degree phase shift between them, producing a dark fringe at the location of the target star. In doing so the starlight is greatly reduced, increasing the contrast, analogous to a coronagraph operating at shorter wavelengths. The LBTI is a unique instrument, having only three warm reflections before the starlight reaches cold mirrors, giving it the best photometric sensitivity of any interferometer operating in the mid-infrared. It also has a superb Adaptive Optics (AO) system giving it Strehl ratios greater than 98% at 10 μm. In 2014 into early 2015 LBTI was undergoing commissioning. The HOSTS project team passed its Operational Readiness Review (ORR) in April 2015. The team recently published papers on the target sample, modeling of the nulled disk images, and initial results such as the detection of warm dust around η Corvi. Recently a paper was published on the data pipeline and on-sky performance. An additional paper is in preparation on β Leo. We will discuss the scientific and programmatic context for the LBTI project, and we will report recent progress, new results, and plans for the science verification phase that started in February 2016, and for the survey.

The Magdalena Ridge Observatory Interferometer (MROI) was the most ambitious infrared interferometric facility conceived of in 2003 when funding began. Today, despite having suffered some financial short-falls, it is still one of the most ambitious interferometric imaging facilities ever designed. With an innovative approach to attaining the original goal of fringe tracking to H = 14th magnitude via completely redesigned mobile telescopes, and a unique approach to the beam train and delay lines, the MROI will be able to image faint and complex objects with milliarcsecond resolutions for a fraction of the cost of giant telescopes or space-based facilities. The design goals of MROI have been optimized for studying stellar astrophysical processes such as mass loss and mass transfer, the formation and evolution of YSOs and their disks, and the environs of nearby AGN. The global needs for Space Situational Awareness (SSA) have moved to the forefront in many communities as Space becomes a more integral part of a national security portfolio. These needs drive imaging capabilities ultimately to a few tens of centimeter resolution at geosynchronous orbits. Any array capable of producing images on faint and complex geosynchronous objects in just a few hours will be outstanding not only as an astrophysical tool, but also for these types of SSA missions. With the recent infusion of new funding from the Air Force Research Lab (AFRL) in Albuquerque, NM, MROI will be able to attain first light, first fringes, and demonstrate bootstrapping with three telescopes by 2020. MROI’s current status along with a sketch of our activities over the coming 5 years will be presented, as well as clear opportunities to collaborate on various aspects of the facility as it comes online. Further funding is actively being sought to accelerate the capability of the array for interferometric imaging on a short time-scale so as to achieve the original goals of this ambitious facility

The Planet Formation Imager (PFI) initiative aims at developing the next generation large scale facility for imaging astronomical optical interferometry operating in the mid-infrared. Here we report on the progress of the Planet Formation Imager Technical Working Group on the beam-combination instruments. We will discuss various available options for the science and fringe-tracker beam combination instruments, ranging from direct imaging, to non-redundant fiber arrays, to integrated optics solutions. Besides considering basic characteristics of the schemes, we will investigate the maturity of the available technological platforms at near- and mid-infrared wavelengths., Comment: 17 pages, 7 figures, Proceedings of SPIE 2016

The Large Binocular Telescope Interferometer (LBTI) is a versatile instrument designed for high-angular resolution and high-contrast infrared imaging (1.5-13 microns). In this paper, we focus on the mid-infrared (8-13 microns) nulling mode and present its theory of operation, data reduction, and on-sky performance as of the end of the commissioning phase in March 2015. With an interferometric baseline of 14.4 meters, the LBTI nuller is specifically tuned to resolve the habitable zone of nearby main-sequence stars, where warm exozodiacal dust emission peaks. Measuring the exozodi luminosity function of nearby main-sequence stars is a key milestone to prepare for future exoEarth direct imaging instruments. Thanks to recent progress in wavefront control and phase stabilization, as well as in data reduction techniques, the LBTI demonstrated in February 2015 a calibrated null accuracy of 0.05% over a three-hour long observing sequence on the bright nearby A3V star beta Leo. This is equivalent to an exozodiacal disk density of 15 to 30 zodi for a Sun-like star located at 10pc, depending on the adopted disk model. This result sets a new record for high-contrast mid-infrared interferometric imaging and opens a new window on the study of planetary systems., 17 pages, 18 figures (resubmitted to ApJ with referee's comments)

We present new MIDI interferometric and VISIR spectroscopic observations of HD 113766 and HD 172555. Additionally, we present VISIR 11-m and 18-m imaging observations of HD 113766. These sources represent the youngest (16 and 12 Myr old, respectively) debris disc hosts with emission on ≪10 au scales. We find that the disc of HD 113766 is partially resolved on baselines of 42–102 m, with variations in resolution with baseline length consistent with a Gaussian model for the disc with a full width at half-maximum (FWHM) of 1.2–1.6 au (9–12 mas). This is consistent with the VISIR observations which place an upper limit of 0.14 arcsec (17 au) on the emission, with no evidence for extended emission at larger distances. For HD 172555, the MIDI observations are consistent with complete resolution of the disc emission on all baselines of lengths 56–93 m, putting the dust at a distance of >1 au (>35 mas). When combined with limits from TReCS imaging, the dust at ∼10 m is constrained to lie somewhere in the region of 1–8 au. Observations at ∼18 m reveal extended disc emission which could originate from the outer edge of a broad disc, the inner parts of which are also detected but not resolved at 10 m, or from a spatially distinct component. These observations provide the most accurate direct measurements of the location of the dust at 1–8 au that might originate from the collisions expected during terrestrial planet formation. These observations provide valuable constraints for models of the composition of discs at this epoch and provide a foundation for future studies to examine in more detail the morphology of debris discs.

Many astronomical objects are expected to be strongly polarized on the angular scales accessible with optical and infrared interferometry. Passage of stellar light through the optical trains of a long-baseline interferometer can induce cross talk between the polarized and unpolarized components of the light. As a result, the calibrated interferometric visibilities may depend on a difficult-to-separate mixture of the angular structure and the spatially varying polarization structure of the object being studied, and this will compromise the scientific usefulness of the interferometric data. We investigate the problem of designing a polarization-fidelity interferometer: one that can make accurate maps of the total intensity of an object, even when the object has a significant spatially varying polarized component. We demonstrate that taking polarization issues into account when designing the interferometric train is mandatory even when the interferometer has symmetric arms, and we identify that the key metric for such an interferometer is the diattenuation of the optical train. We evaluate the performance penalties incurred in an interferometer where polarization issues have not been adequately addressed.

An understanding of some of the physical bases of interferometric imaging can be helpful both in designing and understanding interferometric telescope arrays and in planning, executing and interpreting astronomical interferometric observations. This paper presents a brief introduction to some of these key principles at a level suitable for those who are new to interferometry, and with particular emphasis on four key areas: classical imaging theory, coherence functions, interferometric observables, and interferometric imaging. These topics underpin the practice of much of interferometric astronomy (at optical as well as other wavelengths), and provide a valuable basis from which to develop a better understanding of the operation of the VLTI in later chapters.

The Hunt for Observable Signatures of Terrestrial planetary Systems (HOSTS) on the Large Binocular Telescope Interferometer will survey nearby stars for faint emission arising from ~300 K dust (exozodiacal dust), and aims to determine the exozodiacal dust luminosity function. HOSTS results will enable planning for future space telescopes aimed at direct spectroscopy of habitable zone terrestrial planets, as well as greater understanding of the evolution of exozodiacal disks and planetary systems. We lay out here the considerations that lead to the final HOSTS target list. Our target selection strategy maximizes the ability of the survey to constrain the exozodi luminosity function by selecting a combination of stars selected for suitability as targets of future missions and as sensitive exozodi probes. With a survey of approximately 50 stars, we show that HOSTS can enable an understanding of the statistical distribution of warm dust around various types of stars and is robust to the effects of varying levels of survey sensitivity induced by weather conditions., Comment: accepted to ApJS

We report on the first nulling interferometric observations with the Large Binocular Telescope Interferometer (LBTI), resolving the N' band (9.81 - 12.41 um) emission around the nearby main-sequence star eta Crv (F2V, 1-2 Gyr). The measured source null depth amounts to 4.40% +/- 0.35% over a field-of-view of 140 mas in radius (~2.6\,AU at the distance of eta Corvi) and shows no significant variation over 35{\deg} of sky rotation. This relatively low null is unexpected given the total disk to star flux ratio measured by Spitzer/IRS (~23% across the N' band), suggesting that a significant fraction of the dust lies within the central nulled response of the LBTI (79 mas or 1.4 AU). Modeling of the warm disk shows that it cannot resemble a scaled version of the Solar zodiacal cloud, unless it is almost perpendicular to the outer disk imaged by Herschel. It is more likely that the inner and outer disks are coplanar and the warm dust is located at a distance of 0.5-1.0 AU, significantly closer than previously predicted by models of the IRS spectrum (~3 AU). The predicted disk sizes can be reconciled if the warm disk is not centrosymmetric, or if the dust particles are dominated by very small grains. Both possibilities hint that a recent collision has produced much of the dust. Finally, we discuss the implications for the presence of dust at the distance where the insolation is the same as Earth's (2.3 AU)., Comment: 9 pages, 6 figures, accepted for publication in ApJ

Habitable zone dust levels are a key unknown that must be understood to ensure the success of future space missions to image Earth analogues around nearby stars. Current detection limits are several orders of magnitude above the level of the Solar System's Zodiacal cloud, so characterisation of the brightness distribution of exo-zodi down to much fainter levels is needed. To this end, the large Binocular Telescope Interferometer (LBTI) will detect thermal emission from habitable zone exo-zodi a few times brighter than Solar System levels. Here we present a modelling framework for interpreting LBTI observations, which yields dust levels from detections and upper limits that are then converted into predictions and upper limits for the scattered light surface brightness. We apply this model to the HOSTS survey sample of nearby stars; assuming a null depth uncertainty of 10$^{-4}$ the LBTI will be sensitive to dust a few times above the Solar System level around Sun-like stars, and to even lower dust levels for more massive stars., Accepted to ApJS

A new method of wavefront sensing that uses a pair of equally defocused images to derive the wavefront aberrations is presented. Unlike in conventional curvature-sensing systems, the sensor works in a near-focus regime where the transport of intensity equation is not valid, and, unlike in phase-diversity methods, a non-iterative algorithm is used to infer the wavefront aberrations. The sensor designs outlined only require a small number of detector pixels: two designs with five and nine pixels per plane are analysed, and the nine-element sensor (NES) is shown to have a competitive measurement sensitivity compared with existing low-order astronomical wavefront sensors. The NES is thus well suited to applications such as adaptive optics for the individual telescopes in an optical interferometer array.

We present interferometric visibility measurements of the nearby Mira-like star R Doradus and the Mira R Leo taken over a wide range of wavelengths (650-990 nm). These are the first simultaneous observations of visibility as a function of wavelength over such a wide wavelength range for a Mira. The observations were made using MAPPIT (Masked APerture-Plane Interference Telescope), an interferometer operating at the 3.9-m Anglo-Australian Telescope. We used a slit to mask the telescope aperture and a prism to disperse the interference pattern in wavelength. We observed in both stars strong decreases in visibility within the TiO absorption bands across the observed wavelength range. Comparison of our results with theoretical models shows general agreement but differences in detail, suggesting that further work is needed to refine the theoretical models. We find that models for stars pulsating in the fundamental mode best fit our observations.

The opportunity to deliver high-angular resolution model-independent images is one of the most attractive prospects for optical/infrared interferometry. In this paper I use simple imaging simulations to identify some of the practical difficulties that may arise in achieving this goal with the VLTI. For the types of studies investigated here – stellar surface imaging and the mapping of emission line disks – it is likely that the key challenges will be to measure the visibility function on a sufficiently large range of baselines, and to secure accurate and reliable phase information.

In the first part of this review we survey the role optical/infrared interferometry now plays in ground-based astronomy. We discuss in turn the origins of astronomical interferometry, the motivation for its development, the techniques of its implementation, examples of its astronomical significance, and the limitations of the current generation of interferometric arrays. The second part focuses on the prospects for ground-based astronomical imaging interferometry over the near to mid-term (i.e. 10 years) at optical and near-infrared wavelengths. An assessment is made of the astronomical and technical factors which determine the optimal designs for imaging arrays. An analysis based on scientific capability, technical feasibility and cost argues for an array of large numbers of moderate-sized (2 m class) telescopes rather than one comprising a small number of much larger collectors.

The fast tip-tilt (FTT) correction system for the Magdalena Ridge Observatory Interferometer (MROI) is being developed by the University of Cambridge. The design incorporates an EMCCD camera protected by a thermal enclosure, optical mounts with passive thermal compensation, and control software running under Xenomai real-time Linux. The complete FTT system is now undergoing laboratory testing prior to being installed on the first MROI unit telescope in the fall of 2014. We are following a twin-track approach to testing the closed-loop performance: tracking tip-tilt perturbations introduced by an actuated flat mirror in the laboratory, and undertaking end-to-end simulations that incorporate realistic higher-order atmospheric perturbations. We report test results that demonstrate (a) the high stability of the entire opto-mechanical system, realized with a completely passive design; and (b) the fast tip-tilt correction performance and limiting sensitivity. Our preliminary results in both areas are close to those needed to realise the ambitious stability and sensitivity goals of the MROI which aims to match the performance of current natural guide star adaptive optics systems.

The Magdalena Ridge Observatory Interferometer has been designed to be a 10 × 1.4 m aperture long-baseline optical/near-infrared interferometer in an equilateral "Y" configuration, and is being deployed west of Socorro, NM on the Magdalena Ridge. Unfortunately, first light for the facility has been delayed due to the current difficult funding regime, but during the past two years we have made substantial progress on many of the key subsystems for the array. The design of all these subsystems is largely complete, and laboratory assembly and testing, and the installation and site acceptance testing of key components on the Ridge are now underway. This paper serves as an overview and update on the facility's present status and changes since 2012, and the plans for future activities and eventual operations of the facilities.

The Hunt for Observable Signatures of Terrestrial planetary Systems (HOSTS) program on the Large Binocular Telescope Interferometer (LBTI) will survey nearby stars for faint exozodiacal dust (exozodi). This warm circumstellar dust, analogous to the interplanetary dust found in the vicinity of the Earth in our own system, is produced in comet breakups and asteroid collisions. Emission and/or scattered light from the exozodi will be the major source of astrophysical noise for a future space telescope aimed at direct imaging and spectroscopy of terrestrial planets (exo- Earths) around nearby stars. About 20% of nearby field stars have cold dust coming from planetesimals at large distances from the stars (Eiroa et al. 2013, A&A, 555, A11; Siercho et al. 2014, ApJ, 785, 33). Much less is known about exozodi; current detection limits for individual stars are at best ~ 500 times our solar system's level (aka. 500 zodi). LBTI-HOSTS will be the first survey capable of measuring exozodi at the 10 zodi level (3σ). Detections of warm dust will also reveal new information about planetary system architectures and evolution. We will describe the motivation for the survey and progress on target selection, not only the actual stars likely to be observed by such a mission but also those whose observation will enable sensible extrapolations for stars that will not be observed with LBTI. We briefly describe the detection of the debris disk around η Crv, which is the first scientific result from the LBTI coming from the commissioning of the instrument in December 2013, shortly after the first time the fringes were stabilized.

The loop is closed on ICONN, the Magdalena Ridge Observatory Interferometer fringe tracker. Results from laboratory experiments demonstrating ICONN's ability to track realistic, atmospheric-like path difference perturbations in real-time are shown. Characterizing and understanding the behavior and limits of ICONN in a controlled environment are key for reaching the goals of the MROI. The limiting factors in the experiments were found to be the light delivery system and temporary path length correction mechanism; not the on-sky components of ICONN. ICONN was capable of tracking fringes with a coherence loss below 5%; this will only improve in its final deployment.

Among the most fascinating and hotly-debated areas in contemporary astrophysics are the means by which planetary systems are assembled from the large rotating disks of gas and dust which attend a stellar birth. Although important work has already been, and is still being done both in theory and observation, a full understanding of the physics of planet formation can only be achieved by opening observational windows able to directly witness the process in action. The key requirement is then to probe planet-forming systems at the natural spatial scales over which material is being assembled. By definition, this is the so-called Hill Sphere which delineates the region of influence of a gravitating body within its surrounding environment. The Planet Formation Imager project (PFI) has crystallized around this challenging goal: to deliver resolved images of Hill-Sphere-sized structures within candidate planet-hosting disks in the nearest star-forming regions. In this contribution we outline the primary science case of PFI. For this purpose, we briefly review our knowledge about the planet-formation process and discuss recent observational results that have been obtained on the class of transition disks. Spectro-photometric and multi-wavelength interferometric studies of these systems revealed the presence of extended gaps and complex density inhomogeneities that might be triggered by orbiting planets. We present detailed 3-D radiation-hydrodynamic simulations of disks with single and multiple embedded planets, from which we compute synthetic images at near-infrared, mid-infrared, far-infrared, and sub-millimeter wavelengths, enabling a direct comparison of the signatures that are detectable with PFI and complementary facilities such as ALMA. From these simulations, we derive some preliminary specifications that will guide the array design and technology roadmap of the facility., Comment: SPIE Astronomical Telescopes and Instrumentation conference, June 2014, Paper ID 9146-120, 13 pages, 3 Figures

Complex non-linear and dynamic processes lie at the heart of the planet formation process. Through numerical simulation and basic observational constraints, the basics of planet formation are now coming into focus. High resolution imaging at a range of wavelengths will give us a glimpse into the past of our own solar system and enable a robust theoretical framework for predicting planetary system architectures around a range of stars surrounded by disks with a diversity of initial conditions. Only long-baseline interferometry can provide the needed angular resolution and wavelength coverage to reach these goals and from here we launch our planning efforts. The aim of the "Planet Formation Imager" (PFI) project is to develop the roadmap for the construction of a new near-/mid-infrared interferometric facility that will be optimized to unmask all the major stages of planet formation, from initial dust coagulation, gap formation, evolution of transition disks, mass accretion onto planetary embryos, and eventual disk dispersal. PFI will be able to detect the emission of the cooling, newly-formed planets themselves over the first 100 Myrs, opening up both spectral investigations and also providing a vibrant look into the early dynamical histories of planetary architectures. Here we introduce the Planet Formation Imager (PFI) Project (www.planetformationimager.org) and give initial thoughts on possible facility architectures and technical advances that will be needed to meet the challenging top-level science requirements., Comment: SPIE Astronomical Telescopes and Instrumentation conference, June 2014, Paper ID 9146-35, 10 pages, 2 Figures

We present a numerical analysis of free-space propagation of the beams inside a long-baseline optical/infrared interferometer. Unlike the models of beam propagation used in most previous studies, our analysis incorporates the effects of atmospheric seeing on the wavefronts entering the interferometer. We derive results for the changes in throughput, coherence loss and fringe-detection signal-to-noise ratio arising from diffraction along the propagation path. Our results for conditions of moderate seeing show that although the flux throughput decreases with propagation distance for a given beam diameter, the fringe contrast increases at the same time. In this case it becomes possible for diffraction to increase the signal-to-noise ratio of the fringe measurements. Previous studies have only considered an arrangement where all the apertures in the beam-propagation system have the same diameter. If the light at the end of the propagation path is collected with a fixed size aperture, we find that in many cases the signal-to-noise ratio for fringe detection is maximized when the initial beam diameter is approximately 30 per cent smaller than the final collector diameter. We discuss the implications of our results in the context of future interferometer designs.

The advent of long-baseline optical and infrared interferometers has meant that spatially resolved studies of stellar atmospheres have now become routinely possible. While prototype arrays, which have typically operated with short baselines and limited sensitivity, have produced exciting preliminary results, it is the development of larger dedicated facility arrays, such as the CHARA, Keck, and VLT interferometers, that offer the best prospects for advancing astrophysics. In this paper I review the possibilities and limitations of interferometric studies of stellar atmospheres, and highlight some recent results from optical/IR spatial interferometry.

ICONN is a dedicated fringe tracker for the Magdalena Ridge Observatory Interferometer (MROI) that employs a baseline bootstrapping combination scheme utilizing the interferometer's "Y"-shaped telescope array. The ICONN optomechanics are designed in a modular fashion to combine light from two to ten telescopes while tracking on the nearest neighbor baselines. The software tasked with operating ICONN is designed to interface with the larger MROI software supervisory system. Commands are distributed to high level processes within ICONN, which in turn pass them down internally to lower level threads. The design of ICONN is now complete and laboratory testing has commenced. This paper details the optomechanical and software design of ICONN.

ABSTRA C T We report contemporaneous multi-wavelength interferometric imaging of the red supergiant star Betelgeuse (a Orionis), using the Cambridge Optical Aperture Synthesis Telescope (COAST) and the William Herschel Telescope (WHT), at wavelengths of 700, 905 and 1290 nm. We find a strong variation in the apparent symmetry of the stellar brightness distribution as a function of wavelength. At 700 nm the star is highly asymmetric, and can be modelled as the superposition of three bright spots on a strongly limb-darkened disc. However, at 905 nm only a single low-contrast feature is visible and at 1290 nm the star presents a featureless symmetric disc. The change in spot contrast with wavelength is consistent with a model in which the bright spots represent unobscured areas of elevated temperature, owing perhaps to convection, on a stellar disc that itself has a different appearance, i.e. geometrical extent and limb-darkening profile, at different wavelengths. The featureless centre-to-limb brightness profile seen at 1290 nm is consistent with this model and suggests that future interferometric monitoring of the star to quantify the size changes associated with radial velocity variations should be performed at similar wavelengths in the near-infrared.

We present new observations of the red supergiant VY CMa at 1.25 micron, 1.65 micron, 2.26 micron, 3.08 micron and 4.8 micron. Two complementary observational techniques were utilized: non-redundant aperture masking on the 10-m Keck-I telescope yielding images of the innermost regions at unprecedented resolution, and adaptive optics imaging on the ESO 3.6-m telescope at La Silla attaining extremely high (~10^5) peak-to-noise dynamic range over a wide field. For the first time the inner dust shell has been resolved in the near-infrared to reveal a one-sided extension of circumstellar emission within 0.1" (~15 R_star) of the star. The line-of-sight optical depths of the circumstellar dust shell at 1.65 micron, 2.26 micron, and 3.08 micron have been estimated to be 1.86 +/- 0.42, 0.85 +/- 0.20, and 0.44 +/- 0.11. These new results allow the bolometric luminosity of VY~CMa to be estimated independent of the dust shell geometry, yielding L_star ~ 2x10^5 L_sun. A variety of dust condensations, including a large scattering plume and a bow-shaped dust feature, were observed in the faint, extended nebula up to 4" from the central source. While the origin of the nebulous plume remains uncertain, a geometrical model is developed assuming the plume is produced by radially-driven dust grains forming at a rotating flow insertion point with a rotational period between 1200-4200 years, which is perhaps the stellar rotational period or the orbital period of an unseen companion.

We report the direct detection of cyclic diameter variations in the Mira variable χ Cygni. Interferometric observations made between 1997 July and 1998 September, using the Cambridge Optical Aperture Synthesis Telescope (COAST) indicate periodic changes in the apparent angular diameter with amplitude 45 per-cent of the smallest value.The measurements were made in a 50 nm bandpass centred on 905 nm, which is only moderately contaminated by molecular absorption features. To assess the effects of atmospheric stratification on the apparent diameter measured in this band, we have also measured near-infrared diameters for a sample of five Miras, in both the J-band (1.3 μm) and Wing's (1971) 1.04 μm band, which is expected to isolate essentially pure continuum emission. We present J-band visibility curves which indicate that the intensity profiles of the stars in the sample differ greatly from each other.

Inteferometric imaging with arrays of telescopes is now a routine technique in optical/infrared astronomy, delivering images with nano-radian resolution. Sensitive next generation arrays, such as the Magdalena Ridge Observatory Interferometer, thus offer a potentially important capability for space situational awareness, allowing satellites in geo-synchronous Earth orbit (GEO) to be inspected after launch. A critical factor for such observations is a lack of short spacings between the telescopes comprising the interferometric array. Large GEO satellites are frequently 20–30m in size, hence ideally the shortest spacings used for the observations should be between 1.2–1.8m for observations at 1 µm wavelength. These cannot easily be realised with existing separated-element arrays. In this paper we explore the approach of combining observations from a separated-element interferometer with interferometric data obtained by optical masking of a “single-dish” telescope. We present simulations that demonstrate that substantial improvements in image fidelity can be achieved in this way. Two shapes of generic satellite shape are investigated, intended to be representative of the majority of bright GEO targets, and the efficacy of the method is assessed for these different target shapes and differing brightness levels.