Search

Full list of authors: Silber, Joseph Harry; Fagrelius, Parker; Fanning, Kevin; Schubnell, Michael; Aguilar, Jessica Nicole; Ahlen, Steven; Ameel, Jon; Ballester, Otger; Baltay, Charles; Bebek, Chris; Beard, Dominic Benton; Besuner, Robert; Cardiel-Sas, Laia; Casas, Ricard; Castander, Francisco Javier; Claybaugh, Todd; Dobson, Carl; Duan, Yutong; Dunlop, Patrick; Edelstein, Jerry; Emmet, William T.; Elliott, Ann; Evatt, Matthew; Gershkovich, Irena; Guy, Julien; Harris, Stu; Heetderks, Henry; Heetderks, Ian; Honscheid, Klaus; Maria Illa, Jose; Jelinsky, Patrick; Jelinsky, Sharon R.; Jimenez, Jorge; Karcher, Armin; Kent, Stephen; Kirkby, David; Kneib, Jean-Paul; Lambert, Andrew; Lampton, Mike; Leitner, Daniela; Levi, Michael; McCauley, Jeremy; Meisner, Aaron; Miller, Timothy N.; Miquel, Ramon; Mundet, Julia; Poppett, Claire; Rabinowitz, David; Reil, Kevin; Roman, David; Schlegel, David; Serrano, Santiago; Van Shourt, William; Sprayberry, David; Tarle, Gregory; Tie, Suk Sien; Weaverdyck, Curtis; Zhang, Kai; Azzaro, Marco; Bailey, Stephen; Becerril, Santiago; Blackwell, Tami; Bouri, Mohamed; Brooks, David; Buckley-Geer, Elizabeth; Penate Castro, Jose; Derwent, Mark; Dey, Arjun; Dhungana, Govinda; Doel, Peter; Eisenstein, Daniel J.; Fahim, Nasib; Garcia-Bellido, Juan; Gaztanaga, Enrique; Gontcho, Satya Gontcho A.; Gutierrez, Gaston; Horler, Philipp; Kehoe, Robert; Kisner, Theodore; Kremin, Anthony; Kronig, Luzius; Landriau, Martin; Le Guillou, Laurent; Martini, Paul; Moustakas, John; Palanque-Delabrouille, Nathalie; Peng, Xiyan; Percival, Will; Prada, Francisco; Allende Prieto, Carlos; Gonzalez de Rivera, Guillermo; Sanchez, Eusebio; Sanchez, Justo; Sharples, Ray; Soares-Santos, Marcelle; Schlafly, Edward; Weaver, Benjamin Alan; Zhou, Zhimin; Zhu, Yaling; Zou, Hu; DESI Collaboration.--This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse, distribution, and reproduction in any medium, provided the original work is properly cited., A system of 5020 robotic fiber positioners was installed in 2019 on the Mayall Telescope, at Kitt Peak National Observatory. The robots automatically retarget their optical fibers every 10–20 minutes, each to a precision of several microns, with a reconfiguration time of fewer than 2 minutes. Over the next 5 yr, they will enable the newly constructed Dark Energy Spectroscopic Instrument (DESI) to measure the spectra of 35 million galaxies and quasars. DESI will produce the largest 3D map of the universe to date and measure the expansion history of the cosmos. In addition to the 5020 robotic positioners and optical fibers, DESI's Focal Plane System includes six guide cameras, four wave front cameras, 123 fiducial point sources, and a metrology camera mounted at the primary mirror. The system also includes associated structural, thermal, and electrical systems. In all, it contains over 675,000 individual parts. We discuss the design, construction, quality control, and integration of all these components. We include a summary of the key requirements, the review and acceptance process, on-sky validations of requirements, and lessons learned for future multiobject, fiber-fed spectrographs. © 2022. The Author(s). Published by the American Astronomical Society., The authors in the Barcelona-Madrid Regional Participation Group (BCN-MAD RPG) wish to acknowledge support by MICIN under grants PID2019-111317 GB, PGC2018-094773, PGC2018-102021, SEV-2016-0588, SEV-2016-0597, MDM-2015-0509, and CEX2020-001058-M, some of which include ERDF funds from the European Union. IFAE is partially funded by the CERCA program of the Generalitat de Catalunya. M.A., S.B., N.F., F.P., G.G.R., and J.S. acknowledge support from the Spanish MICINN grants MultiDark CSD2009-00064, IFT-UAM/CSIC Severo Ochoa Award SEV-2012-0249 and AYA2014-60641-C2-1-P, CSIC-AVS contract through MICINN grant AYA2010-21231-C02-01 and CDTI grant IDC-20101033, and support from the Campus of International Excellence UAM+CSIC. This research is supported by the Director, Office of Science, Office of High Energy Physics of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231, and by the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility under the same contract; additional support for DESI is provided by the U.S. National Science Foundation, Division of Astronomical Sciences under Contract No. AST-0950945 to the NSF's National Optical-Infrared Astronomy Research Laboratory; the Science and Technologies Facilities Council of the United Kingdom; the Gordon and Betty Moore Foundation; the Heising-Simons Foundation; the French Alternative Energies and Atomic Energy Commission (CEA); the National Council of Science and Technology of Mexico (CONACYT); the Ministry of Science and Innovation of Spain (MICINN), and by the DESI Member Institutions: https://www.desi.lbl.gov/collaborating-institutions., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S).

We report on the development of commercially fabricated multi-chroic antenna coupled Transition Edge Sensor (TES) bolometer arrays for Cosmic Microwave Background (CMB) polarimetry experiments. CMB polarimetry experiments have deployed instruments in stages. Stage-II experiments deployed with O(1,000) detectors and reported successful detection of B-mode (divergent free) polarization pattern in the CMB. Stage-III experiments have recently started observing with O(10,000) detectors with wider frequency coverage. A concept for a Stage-IV experiment, CMB-S4, is emerging to make a definitive measurement of CMB polarization from the ground with O(400,000) detectors. The orders of magnitude increase in detector count for CMB-S4 requires a new approach in detector fabrication to increase fabrication throughput.and reduce cost. We report on collaborative efforts with two commercial micro-fabrication foundries to fabricate antenna coupled TES bolometer detectors. The detector design is based on the sinuous antenna coupled dichroic detector from the POLARBEAR-2 experiment. The TES bolometers showed the expected I-V response and the RF performance agrees with simulation. We will discuss the motivation, design consideration, fabrication processes, test results, and how industrial detector fabrication could be a path to fabricate hundreds of detector wafers for future CMB polarimetry experiments., 5 pages 2 figures Journal of Low Temperature Physics - Special Edition - LTD17 Proceedings

We provide an overview of the science case, instrument configuration and project plan for the next-generation ground-based cosmic microwave background experiment CMB-S4, for consideration by the 2020 Decadal Survey.

Author(s): Schlegel, David J; Kollmeier, Juna A; Aldering, Greg; Bailey, Stephen; Baltay, Charles; Bebek, Christopher; BenZvi, Segev; Besuner, Robert; Blanc, Guillermo; Bolton, Adam S; Bouri, Mohamed; Brooks, David; Buckley-Geer, Elizabeth; Cai, Zheng; Crane, Jeffrey; Dey, Arjun; Doel, Peter; Fan, Xiaohui; Ferraro, Simone; Font-Ribera, Andreu; Gutierrez, Gaston; Guy, Julien; Heetderks, Henry; Huterer, Dragan; Infante, Leopoldo; Jelinsky, Patrick; Johns, Matthew; Karagiannis, Dionysios; Kent, Stephen M; Kim, Alex G; Kneib, Jean-Paul; Kronig, Luzius; Konidaris, Nick; Lahav, Ofer; Lampton, Michael L; Lang, Dustin; Leauthaud, Alexie; Liguori, Michele; Linder, Eric V; Magneville, Christophe; Martini, Paul; Mateo, Mario; McDonald, Patrick; Miller, Christopher J; Moustakas, John; Myers, Adam D; Mulchaey, John; Newman, Jeffrey A; Nugent, Peter E; Palanque-Delabrouille, Nathalie; Padmanabhan, Nikhil; Piro, Anthony L; Poppett, Claire; Prochaska, Jason X; Pullen, Anthony R; Rabinowitz, David; Ramirez, Solange; Rix, Hans-Walter; Ross, Ashley J; Samushia, Lado; Schaan, Emmanuel; Schubnell, Michael; Seljak, Uros; Seo, Hee-Jong; Shectman, Stephen A; Silber, Joseph; Simon, Joshua D; Slepian, Zachary; Soares-Santos, Marcelle; Tarle, Greg; Thompson, Ian; Valluri, Monica; Wechsler, Risa H; White, Martin; Wilson, Michael J; Yeche, Christophe; Zaritsky, Dennis | Abstract: MegaMapper is a proposed ground-based experiment to measure Inflation parameters and Dark Energy from galaxy redshifts at 2

© 2017 IOP Publishing Ltd and Sissa Medialab srl. We describe improvements in CCD performance that have been achieved on 4k×4k, (15 μm)2-pixel, fully depleted CCDs for the Dark Energy Spectroscopic Instrument (DESI) [1]. With respect to our previous work on CCDs for the Dark Energy Camera and the Baryon Oscillation Spectroscopic Survey, our goals for the DESI CCD development were to improve read noise and quantum efficiency, improve the astrometric precision, and decrease pixel-size variations. We report experimental results on recently fabricated CCDs to be used in DESI.

The Dark Energy Spectroscopic Instrument (DESI) is under construction and will be used to measure the expansion history of the Universe using the Baryon Acoustic Oscillation (BAO) technique and the growth of structure using redshift-space distortions (RSD). The spectra of 30 million galaxies over 14000 sq deg will be measured over the course of the experiment. In order to provide spectroscopic targets for the DESI survey, we are carrying out a three-band (g,r,z ) imaging survey of the sky using the NOAO 4-m telescopes at Kitt Peak National Observatory (KPNO) and the Cerro Tololo Interamerican Observatory (CTIO). At KPNO, we will use an upgraded version of the Mayall 4m telescope prime focus camera, Mosaic3, to carry out a z-band survey of the Northern Galactic Cap at declinations δ≥+30 degrees. By equipping an existing Dewar with four 4kx4k fully depleted CCDs manufactured by the Lawrence Berkeley National Laboratory (LBNL), we increased the z-band throughput of the system by a factor of 1.6. These devices have the thickest active area fielded at a telescope. The Mosaic3 z-band survey will be complemented by g-band and r-band observations using the Bok telescope and 90 Prime imager on Kitt Peak. We describe the upgrade and performance of the Mosaic3 instrument and the scope of the northern survey.

A 12.3-megapixel charge-coupled device (CCD) that can be operated at high substrate-bias voltages has been developed in support of a proposal to study dark energy. The pixel size is 10.5 mum, and the format is 3512 rows by 3508 columns. The CCD is nominally 200 mum thick and is fabricated on high-resistivity n-type silicon that allows for fully depleted operation with the application of a substrate-bias voltage. The CCD is required to have high quantum efficiency (QE) at near-infrared wavelengths, low noise and dark current, and an rms spatial resolution of less than 4 mum. In order to optimize the spatial resolution and QE, requirements that have conflicting dependences on the substrate thickness, it is necessary to operate the CCD at large substrate-bias voltages. In this paper, we describe the features of the CCD, summarize the performance, and discuss in detail the device-design techniques used to realize 200-mum-thick CCDs that can be operated at substrate-bias voltages in excess of 100 V.

Thick, fully depleted p-channel charge-coupled devices (CCDs) have been developed at the Lawrence Berkeley National Laboratory (LBNL). These CCDs have several advantages over conventional thin, n-channel CCDs, including enhanced quantum efficiency and reduced fringing at near-infrared wavelengths and improved radiation tolerance. Here we report results from the irradiation of CCDs with 12.5 and 55 MeV protons at the LBNL 88-Inch Cyclotron and with 0.1-1 MeV electrons at the LBNL Co60 source. These studies indicate that the LBNL CCDs perform well after irradiation, even in the parameters in which significant degradation is observed in other CCDs: charge transfer efficiency, dark current, and isolated hot pixels. Modeling the radiation exposure over a six-year mission lifetime with no annealing, we expect an increase in dark current of 20 e/pixel/hr, and a degradation of charge transfer efficiency in the parallel direction of 3e-6 and 1e-6 in the serial direction. The dark current is observed to improve with an annealing cycle, while the parallel CTE is relatively unaffected and the serial CTE is somewhat degraded. As expected, the radiation tolerance of the p-channel LBNL CCDs is significantly improved over the conventional n-channel CCDs that are currently employed in space-based telescopes such as the Hubble Space Telescope., 11 pages, 10 figures, submitted to IEEE Transactions

The SNAP space mission concept is designed to explore dark energy with Type Ia supernova distance–luminosity measurements and with weak lensing angular distance correlation power spectrum. The supernova program uses photometric discovery and detailed follow-up observations of at least 2000 Type Ia supernovae with redshifts ranging from 0.3 to 1.7. The weak lensing program uses a deep small field survey and a shallower large field survey with photometry, position and shape measurement of several million galaxies. The instrument sits at the focus of a ∼2-m diameter three-mirror anastigmat telescope with a 1.4 deg2 field of view. It consists of an imager that instruments 0.7 deg2 of the field of view, and a low-resolution spectrograph. Both the photometer and spectrograph use visible and near-infrared detectors to span the wavelength range 400–1700 nm. Wavelength is covered with two detector materials implemented with different readout architectures—CCDs for the visible and HgCdTe hybrid pixel detectors for the near-infrared. While these detector technologies are familiar in HEP experiments, they used in a very different manner, namely photon counting. The physics, architecture and characteristics of these detectors and how they are used will be presented.

Lateral charge diffusion in charge-coupled devices (CCDs) dominates the device point-spread function (PSF), which can affect both image quality and spectroscopic resolution. We present new data and theoretical interpretations for lateral charge diffusion in thick, fully depleted CCDs developed at Lawrence Berkeley National Laboratory (LBNL). Because they can be overdepleted, the LBNL devices have no field-free region and diffusion is controlled through the application of an external bias voltage. Recent improvements in CCD design at LBNL allow the application of bias voltages exceeding 200 V. We give results for a 3512times3512 format, 10.5 mum pixel back-illuminated p-channel CCD developed for the SuperNova/Acceleration Probe (SNAP), a proposed satellite-based experiment designed to study dark energy. Lateral charge diffusion, which is well described by a symmetric two-dimensional (2-D) Gaussian function, was measured at substrate bias voltages between 3 and 115 V. At a bias voltage of 115 V, we measure a root-mean square (rms) diffusion of 3.7plusmn0.2mum. Lateral charge diffusion in LBNL CCDs will meet the SNAP requirements

In this work we describe efforts to reduce the read noise in fully depleted, scientific charge-coupled devices (CCDs). The read noise is proportional to the total capacitance at the floating-diffusion node. Reductions in the capacitance at the floating diffusion are accomplished by implementing a direct contact between the output transistor, polysilicon-gate electrode and the floating diffusion. We have previously reported promising results for this technology that were measured on small-format CCDs with 4-channel readout where each channel had a different output transistor geometry. In this work we present the results of the use of this technology on 12 and 16-channel, large-format CCDs in order to determine the reproducibility of the process. The contact size for this work is two microns by two microns, and projection lithography was used to print the contacts. We have also utilized selective wafer-stepper lithography to generate contacts that are one micron on a side. We also describe efforts in the device design of the output transistor to further reduce the noise.

The KPNO Nicholas U. Mayall 4-meter telescope is to be the host facility for the Dark Energy Spectroscopic Instrument (DESI). DESI will record broadband spectra simultaneously for 5000 objects distributed over a 3-degree diameter field of view; it will record the spectra of approximately 20 million galaxies and quasi-stellar objects during a five-year survey. This survey will improve the combined precision of measurement on the dark energy equation of state today (w 0 ) and its evolution with redshift (w a ) by approximately a factor of ten over existing spectroscopy baryon acoustic oscillation surveys (e.g., BOSS 1 ) in both co-moving volume surveyed and number of galaxies mapped. Installation of DESI on the telescope is a complex procedure, involving a complete replacement of the telescope top end, routing of massive fiber cables, and installation of banks of spectrographs in an environmentally-controlled lab area within the dome. Furthermore, assembly of the instrument and major subsystems must be carried out on-site given their size and complexity. A detailed installation plan is being developed early in the project in order to ensure that DESI and its subsystems are designed so they can be safely and efficiently installed, and to ensure that all telescope and facility modifications required to enable installation are identified and completed in time.

The Dark Energy Spectroscopic Instrument (DESI) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations (BAO) and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar spectroscopic redshift survey. The DESI instrument consists of a new wide-field (3.2 deg. linear field of view) corrector plus a multi-object spectrometer with up to 5000 robotically positioned optical fibers and will be installed at prime focus on the Mayall 4m telescope at Kitt Peak, Arizona. The fibers feed 10 three-arm spectrographs producing spectra that cover a wavelength range from 360-980 nm and have resolution of 2000-5500 depending on the wavelength. The DESI instrument is designed for a 14,000 sq. deg. multi-year survey of targets that trace the evolution of dark energy out to redshift 3.5 using the redshifts of luminous red galaxies (LRGs), emission line galaxies (ELGs) and quasars. DESI is the successor to the successful Stage-III BOSS spectroscopic redshift survey and complements imaging surveys such as the Stage-III Dark Energy Survey (DES, currently operating) and the Stage-IV Large Synoptic Survey Telescope (LSST, planned start early in the next decade).

The Zwicky Transient Facility (ZTF) is a synoptic optical survey for high-cadence time-domain astronomy. Building upon the experience and infrastructure of the highly successful Palomar Transient Factory (PTF) team, ZTF will survey more than an order of magnitude faster than PTF in sky area and volume in order to identify rare, rapidly varying optical sources. These sources will include a trove of supernovae, exotic explosive transients, unusual stellar variables, compact binaries, active galactic nuclei, and asteroids. The single-visit depth of 20.4 mag is well matched to spectroscopic follow-up observations, while the co-added images will provide wide sky coverage 1.5 – 2 mag deeper than SDSS. The ZTF survey will cover the entire Northern Sky and revisit fields on timescales of a few hours, providing hundreds of visits per field each year, an unprecedented cadence, as required to detect fast transients and variability. This high-cadence survey is enabled by an observing system based on a new camera having 47 deg^2 field of view – a factor of 6.5 greater than the existing PTF camera - equipped with fast readout electronics, a large, fast exposure shutter, faster telescope and dome drives, and various measures to optimize delivered image quality. Our project has already received an initial procurement of e2v wafer-scale CCDs and we are currently fabricating the camera cryostat. International partners and the NSF committed funds in June 2014 so construction can proceed as planned to commence engineering commissioning in 2016 and begin operations in 2017. Public release will allow broad utilization of these data by the US astronomical community. ZTF will also promote the development of transient and variable science methods in preparation for the seminal first light of LSST.

In this work we present simple, physics-based models for two effects that have been noted in the fully depleted CCDs that are presently used in the Dark Energy Survey Camera. The first effect is the observation that the point-spread function increases slightly with the signal level. This is explained by considering the effect on charge-carrier diffusion due to the reduction in the magnitude of the channel potential as collected signal charge acts to partially neutralize the fixed charge in the depleted channel. The resulting reduced voltage drop across the carrier drift region decreases the vertical electric field and increases the carrier transit time. The second effect is the observation of low-level, concentric ring patterns seen in uniformly illuminated images. This effect is shown to be most likely due to lateral deflection of charge during the transit of the photo-generated carriers to the potential wells as a result of lateral electric fields. The lateral fields are a result of space charge in the fully depleted substrates arising from resistivity variations inherent to the growth of the high-resistivity silicon used to fabricate the CCDs.

[The BigBOSS experiment is a redshift survey designed to map the large scale structure of the universe and probe the nature of dark energy. Using massively-multiplexed _ber spectroscopy over 14,000 deg2 of sky, the survey will deliver more than 20 million galaxy and quasar redshifts. The resulting three dimensional sky map will contain signatures from primordial baryon acoustic oscillations (BAO) that set a "standard ruler" distance scale. Using the BAO signature, BigBOSS will measure the cosmological distance scale to < 1% accuracy from 0.5

We describe work at Lawrence Berkeley National Laboratory (LBNL) to develop enhanced performance, fully depleted, back-illuminated charge-coupled devices for astronomy and astrophysics. The CCDs are fabricated on high-resistivity substrates and are typically 200–300 μm thick for improved near-infrared response. The primary research and development areas include methods to reduce read noise, increase quantum efficiency and readout speed, and the development of fabrication methods for the efficient production of CCDs for large focal planes. In terms of noise reduction, we will describe technology developments with our industrial partner Teledyne DALSA Semiconductor to develop a buried-contact technology for reduced floating-diffusion capacitance, as well as efforts to develop ”skipper” CCDs with sub-electron noise utilizing non-destructive readout amplifiers allowing for multiple sampling of the charge packets. Improvements in quantum efficiency in the near-infrared utilizing ultra-high resistivity substrates that allow full depletion of 500 μm and thicker substrates will be described, as well as studies to improve the blue and UV sensitivity by investigating the limits on the thickness of the back-side ohmic contact layer used in the LBNL technology. Improvements in readout speed by increasing the number of readout ports will be described, including work on high frame-rate CCDs for x-ray synchrotrons with as many as 192 amplifiers per CCD. Finally, we will describe improvements in fabrication methods, developed in the course of producing over 100 science-grade 2k × 4k CCDs for the Dark Energy Survey Camera.

BigBOSS is a proposed ground-based dark energy experiment to study baryon acoustic oscillations (BAO) and the growth of structure with a 14,000 square degree galaxy and quasi-stellar object redshift survey. It consists of a 5,000- fiber-positioner focal plane feeding the spectrographs. The optical fibers are separated into ten 500 fiber slit heads at the entrance of ten identical spectrographs in a thermally insulated room. Each of the ten spectrographs has a spectral resolution (λ/Δλ) between 1500 and 4000 over a wavelength range from 360 - 980 nm. Each spectrograph uses two dichroic beam splitters to separate the spectrograph into three arms. It uses volume phase holographic (VPH) gratings for high efficiency and compactness. Each arm uses a 4096x4096 15 μm pixel charge coupled device (CCD) for the detector. We describe the requirements and current design of the BigBOSS spectrograph. Design trades (e.g. refractive versus reflective) and manufacturability are also discussed.

BigBOSS is a proposed ground-based dark energy experiment to study baryon acoustic oscillations (BAO) and the growth of large scale structure. It consists of a fiber-fed multi-object spectrograph designed to be installed on the Mayall 4-meter telescope at Kitt Peak, Arizona. BigBOSS includes an optical corrector assembly and 5000-fiber-positioner focal plane assembly that replace the existing Mayall prime focus hardware. 40-meter long optical fiber bundles are routed from the focal plane, through the telescope declination and right ascension pivots, to spectrographs in the thermally insulated FTS Laboratory, immediately adjacent to the telescope. Each of the ten spectrographs includes three separate spectral bands. The FTS Laboratory also houses support electronics, cooling, and vacuum equipment. The prime focus assembly includes mounts for the existing Mayall f/8 secondary mirror to allow observations with Cassegrain instruments. We describe the major elements of the BigBOSS instrument, plans for integrating with the Telescope, and proposed modifications and additions to existing Mayall facilities.

BigBOSS is a Stage IV dark energy experiment based on proven techniques to study baryon acoustic oscillations and the growth of large scale structure. The 2010 Astronomy and Astrophysics Decadal Survey labeled dark energy as a key area of exploration. BigBOSS is designed to perform a 14,000 square degree survey of 20 million galaxies and quasi-stellar objects. The project involves installation of a new instrument on the Mayall 4m telescope, operated by the National Optical Astronomy Observatory. The instrument includes a new optical widefield corrector, a 5,000 fiber actuator system, and a multi-object spectrometer. Systems engineering flowdown from data set requirements to instrument requirements are discussed, along with the trade considerations and a pre-conceptual baseline design of the widefield optical corrector, spectrometer and fiber positioner systems.

Throughput of a fiber-robot-based multi-object spectrograph depends on the accuracy and precision of the fiber position system. An efficient and accurate method of quantifying the performance of an actuator is necessary during the design iteration process, final design, and for post-production characterization. A CCD camera-based optical setup was developed at the Lawrence Berkeley National Laboratory to test these parameters of fiber robot positioners. The setup is described, as well as tests used to quantify distortion and cross-check measurement by smart scope.

The BigBOSS experiment is a proposed DOE-NSF Stage IV dark energy survey. The all sky survey will be used to study the baryon acoustic oscillation (BAO) and growth of large scale structure from 0.2 < z < 3.5. Key to the timely success of BigBOSS is the total optical throughput of the system. The guide, focus/alignment system will provide essential pointing information, eld acquisition, atmospheric monitoring and alignment corrections all used to maximize light throughput.

The BigBOSS instrument is a proposed multi-object spectrograph for the Mayall 4m telescope at Kitt Peak, which will measure the redshift of 20 million galaxies and map the expansion history of the universe over the past 8 billion years, surveying 10-20 times the volume of existing studies. For each 20 minute observation, 5000 optical fibers are individually positioned by a close-packed array of 5000 robotic positioner mechanisms. Key mechanical constraints on the positioners are: o12mm hardware envelope, o14mm overlapping patrol zones, open-loop targeting accuracy ≤ 40μm, and step resolution ≤ 5μm, among other requirements on envelope, power, stability, and speed. This paper describes the design and performance of a newly-developed fiber positioner with R-θ polar kinematics, in which a flexure-based linear R-axis is stacked on a rotational θ-axis. Benefits over the usual eccentric parallel axis θ-φ kinematic approach include faster repositioning, simplified anti-collision schemes, and inherent anti-backlash preload. Performance results are given for complete positioner assemblies as well as sub-component hardware characterization.

We describe a non-contact optical measurement method used to determine the surface flatness of a cryogenic sensor array developed for the JDEM mission. Large focal planes envisioned for future visible to near infra-red astronomical large area point-source surveys such as JDEM, WFIRST, or EUCLID must operate at cryogenic temperatures while maintaining focal plane flatness within a few 10's of μm over half-meter scales. These constraints are imposed by sensitivity conditions that demand low noise observations from the sensors and the large-field, fast optical telescopes necessary to obtain the science yield. Verifying cryogenic focal plane flatness is challenging because μm level excursions need to be measured within and across many multi-cm sized sensors using no physical contact and while situated within a high-vacuum chamber. We have used an optical metrology Shack-Hartmann scheme to measure the 36x18 cm focal plane developed for the JDEM mission at the Lawrence Berkeley National Laboratory. The focal plane holds a 4x8 array of CCDs and HgCdTe detectors. The flatness measurement scheme uses a telescope-fed micro-lens array that samples the focal plane to determine slope changes of individual sensor zones.

Mission concepts for NASA's Wide Field Infrared Survey Telescope (WFIRST) 1,2 , ESA's Euclid 3,4 mission, as well as next-generation ground-based surveys require large mosaic focal planes sensitive in both visible and near infrared (NIR) wavelengths. We have developed space-qualified detectors, readout electronics and focal plane design techniques that can be used to intermingle CCDs and NIR detectors on a single, silicon carbide (SiC) cold plate. This enables optimized, wideband observing strategies. The CCDs, developed at Lawrence Berkeley National Laboratory, are fully-depleted, pchannel devices that are backside illuminated and capable of operating at temperatures down to 120K. The NIR detectors are 1.7 μm and 2.0 μm wavelength cutoff H2RG® HgCdTe, manufactured by Teledyne Imaging Sensors under contract to LBNL. Both the CCDs and NIR detectors are packaged on 4-side abuttable SiC pedestals with a common mounting footprint supporting a 44 mm mosaic pitch. Both types of detectors have direct-attached readout electronics that convert the detector signal directly to serial, digital data streams and allow a flexible, low cost data acquisition strategy to enable large data rates. A mosaic of these detectors can be operated at a common temperature that achieves the required dark current and read noise performance necessary for dark energy observations. We report here the qualification testing and performance verification for a focal plane that accommodates a 4x8 array of CCDs and HgCdTe detectors.

BigBOSS is a proposed DOE-NSF Stage IV ground-based dark energy experiment designed to study baryon acoustic oscillations (BAO) and the growth of large scale structure with a 14,000 square degree survey of the redshifts of galaxies and quasi-stellar objects. The project involves modification of existing facilities operated by the National Optical Astronomy Observatory (NOAO). Design and systems engineering of a preliminary 3 degree field of view refractive corrector, atmospheric dispersion corrector (ADC), and 5000 actuator fiber positioning system are presented.

This report is based on the BigBOSS proposal submission to NOAO in October 2010, and reflects the project status at that time with minor updates; BigBOSS is a Stage IV ground-based dark energy experiment to study baryon acoustic oscillations (BAO) and the growth of structure with a wide-area galaxy and quasar redshift survey over 14,000 square degrees. It has been conditionally accepted by NOAO in response to a call for major new instrumentation and a high-impact science program for the 4-m Mayall telescope at Kitt Peak. The BigBOSS instrument is a robotically-actuated, fiber-fed spectrograph capable of taking 5000 simultaneous spectra over a wavelength range from 340 nm to 1060 nm, with a resolution R = 3000-4800. Using data from imaging surveys that are already underway, spectroscopic targets are selected that trace the underlying dark matter distribution. In particular, targets include luminous red galaxies (LRGs) up to z = 1.0, extending the BOSS LRG survey in both redshift and survey area. To probe the universe out to even higher redshift, BigBOSS will target bright [OII] emission line galaxies (ELGs) up to z = 1.7. In total, 20 million galaxy redshifts are obtained to measure the BAO feature, trace the matter power spectrum at smaller scales, and detect redshift space distortions. BigBOSS will provide additional constraints on early dark energy and on the curvature of the universe by measuring the Ly-alpha forest in the spectra of over 600,000 2.2 < z < 3.5 quasars. BigBOSS galaxy BAO measurements combined with an analysis of the broadband power, including the Ly-alpha forest in BigBOSS quasar spectra, achieves a FOM of 395 with Planck plus Stage III priors. This FOM is based on conservative assumptions for the analysis of broad band power (kmax = 0.15), and could grow to over 600 if current work allows us to push the analysis to higher wave numbers (kmax = 0.3). BigBOSS will also place constraints on theories of modified gravity and inflation, and will measure the sum of neutrino masses to 0.024 eV accuracy.

We investigate data compression schemes for proposed all-sky diffraction-limited visible/NIR sky surveys aimed at the dark energy problem. We show that lossy square-root compression to 1 bit of noise per pixel, followed by standard lossless compression algorithms, reduces the images to 2.5-4 bits per pixel, depending primarily upon the level of cosmic-ray contamination of the images. Compression to this level adds noise equivalent to, Comment: Revision includes comparison with linear (decimation) compression schemes

The BigBOSS experiment is a proposed DOE-NSF Stage IV ground-based dark energy experiment to study baryon acoustic oscillations (BAO) and the growth of structure with an all-sky galaxy redshift survey. The project is designed to unlock the mystery of dark energy using existing ground-based facilities operated by NOAO. A new 4000-fiber R=5000 spectrograph covering a 3-degree diameter field will measure BAO and redshift space distortions in the distribution of galaxies and hydrogen gas spanning redshifts from 0.2< z< 3.5. The Dark Energy Task Force figure of merit (DETF FoM) for this experiment is expected to be equal to that of a JDEM mission for BAO with the lower risk and cost typical of a ground-based experiment.

To simplify the system integration, thermal design and wiring of the SNAP satellite focal plane a custom IC has been developed that can digitize the four output channels of a CCD. This CCD readout IC is designed to operate at room temperature for test purposes and at 140 K, the operating temperature of the focal plane. The chip consists of four-channels of pre-amplifier, double correlated sampler and 14-bit pipeline AD converter. The chip incorporates an innovative circuitry that selects one of three gain levels on a per-pixel basis to achieve greater than 16-bit dynamic range. It has an on-chip voltage reference and programmable configuration registers. We have tested the performance both at room temperature and at 140 K, as well as the radiation tolerance. The ASIC, implemented in a standard 0.25 mum CMOS technology, has a measured readout noise of 6.2 muV rms at 100 kHz readout speed, a measured non-linearity of plusmn5 LSB and a power consumption of 121 mW.

An ASIC designed to provide the clock signals to the focal plane CCDs for the SNAP satellite project is presented. A prototype has been implemented in a CMOS 0.8 mum SOI high voltage process in order to accommodate a 20 V output swing. The circuit consists of a main charge pump multiplying the 4 V power supply voltage +/-16 V followed by a controlled current source setting the clock voltage plateaus. A bridge of switches provides the clock voltage transitions at the output. This circuit is designed to operate at room temperature for test purpose and at 140 K, which will be the operating temperature. Novel design techniques used in this chip will be presented in detail along with measurement results obtained on the prototypes.

We have developed scientific charge-coupled devices (CCDs) that are fabricated on high-resistivity, n-type silicon substrates, and have demonstrated fully depleted operation for substrate thicknesses of 200-675 mum with formats as large as 2048 times 4096 (15 mum pixels) and 3512 times 3512 (10.5 mum pixels). The main application area for these devices is space and ground-based astronomy, and the CCDs are operated at cryogenic temperatures with slow-scan readout for good performance in terms of dark current and noise. In this work we describe the technology development efforts needed to realize a 4k times 4k (15 mum pixel) CCD with a die area of (64 mm)2. In particular, we describe improved gettering techniques for low dark current and high charge transfer efficiency that have been developed in order to improve fabrication yields for these very large format CCDs.

We describe research and development efforts directed towards the production of 4 k × 4 k, 15 μm-pixel, fully depleted CCDs for the Dark Energy Spectroscopic Instrument (DESI). The requirements for DESI include the spectroscopic characterization of large numbers of faint galaxies at high redshift. The identification of the type and the determination of the redshift of the targeted galaxies require the use of thick, fully depleted CCDs with high quantum efficiency at near-infrared wavelengths. We describe our work to improve the CCD performance in terms of quantum efficiency and read noise. We also discuss efforts to reduce the level of image-distortion effects that have been observed on previous CCDs that are due to resistivity striations in the starting silicon and periodic errors in the photomasks used to produce the CCDs.

Thick, fully-depleted p-channel charge-coupled devices (CCDs) have been developed at the Lawrence Berkeley National Laboratory (LBNL). These CCDs have several advantages over conventional n-channel CCDs, including enhanced quantum efficiency and reduced fringing at near-infrared wavelengths, a small point spread function, and improved radiation tolerance. Here we report results from the irradiation of CCDs with 12.5 and 55 MeV protons at the LBNL 88-Inch Cyclotron. These studies indicate that the CCDs still perform well after irradiation, even in the parameters in which significant degradation is expected: charge transfer efficiency, dark current, and isolated hot pixels. As expected, the radiation tolerance of the LBNL CCDs is significantly improved over conventional n-channel CCDs currently employed in space-based telescopes such as the Hubble Space Telescope (HST).

Author(s): Kolbe, W.F.; Holland, S.E.; Bebek, C.J. | Abstract: P-channel CCD imagers, 200-300um thick, fully depleted, and back-illuminat ed are being developed for scientific applications including ground- and space-based astronomy and x-ray detection. These thick devices have extended IR response, good point-spread function (PSF) and excellent radiation tolerance. Initially, these CCDs were made in-house at LBNL using 100 mm diameter wafers. Fabrication on high-resistivity 150 mm wafers is now proceeding according to a model in which the wafers are first processed at DALSA Semiconductor up to the Al contact mask step. They are then thinned and the rest of the processing is done in small batches at LBNL. Alternative approaches are also discussed. In addition we have implemented designs that permit high-voltage biasing to further improve the PSF. With these designs, operation of 200 um thick C CDs at 100 V or more bias with excellent PSF is practical.

Precision near infrared (NIR) measurements are essential for the next generation of ground and space based instruments. The SuperNova Acceleration Probe (SNAP) will measure thousands of type Ia supernovae up to a redshift of 1.7. The highest redshift supernovae provide the most leverage for determining cosmological parameters, in particular the dark energy equation of state and its possible time evolution. Accurate NIR observations are needed to utilize the full potential of the highest redshift supernovae. Technological improvements in NIR detector fabrication have lead to high quantum efficiency, low noise detectors using a HgCdTe diode with a band-gap that is tuned to cutoff at 1.7 μm. The effects of detector quantum efficiency, read noise, and dark current on lightcurve signal to noise, lightcurve parameter errors, and distance modulus fits are simulated in the SNAPsim framework. Results show that improving quantum efficiency leads to the largest gains in photometric accuracy for type Ia supernovae. High quantum efficiency in the NIR reduces statistical errors and helps control systematic uncertainties at the levels necessary to achieve the primary SNAP science goals.

We present the results of a study of the performance of InGaAs detectors conducted for the SuperNova Acceleration Probe (SNAP) dark energy mission concept. Low temperature data from a nominal 1.7um cut-off wavelength 1kx1k InGaAs photodiode array, hybridized to a Rockwell H1RG multiplexer suggest that InGaAs detector performance is comparable to those of existing 1.7um cut-off HgCdTe arrays. Advances in 1.7um HgCdTe dark current and noise initiated by the SNAP detector research and development program makes it the baseline detector technology for SNAP. However, the results presented herein suggest that existing InGaAs technology is a suitable alternative for other future astronomy applications.

Large format (1k x 1k and 2k x 2k) near infrared detectors manufactured by Rockwell Scientific Center and Raytheon Vision Systems are characterized as part of the near infrared R&D effort for SNAP (the Super-Nova/Acceleration Probe). These are hybridized HgCdTe focal plane arrays with a sharp high wavelength cut-off at 1.7 um. This cut-off provides a sufficiently deep reach in redshift while it allows at the same time low dark current operation of the passively cooled detectors at 140 K. Here the baseline SNAP near infrared system is briefly described and the science driven requirements for the near infrared detectors are summarized. A few results obtained during the testing of engineering grade near infrared devices procured for the SNAP project are highlighted. In particular some recent measurements that target correlated noise between adjacent detector pixels due to capacitive coupling and the response uniformity within individual detector pixels are discussed.

We describe charge-coupled device (CCD) developmentactivities at the Lawrence Berkeley National Laboratory (LBNL).Back-illuminated CCDs fabricated on 200-300 mu m thick, fully depleted,high-resistivity silicon substrates are produced in partnership with acommercial CCD foundry.The CCDs are fully depleted by the application ofa substrate bias voltage. Spatial resolution considerations requireoperation of thick, fully depleted CCDs at high substrate bias voltages.We have developed CCDs that are compatible with substrate bias voltagesof at least 200V. This improves spatial resolution for a given thickness,and allows for full depletion of thicker CCDs than previously considered.We have demonstrated full depletion of 650-675 mu m thick CCDs, withpotential applications in direct x-ray detection. In this work we discussthe issues related to high-voltage operation of fully depleted CCDs, aswell as experimental results on high-voltage-compatible CCDs.

The usual quantum efficiency (QE) measurement heavily relies on a calibrated photodiode (PD) and the knowledge of the CCDs gain. Either can introduce significant systematic errors. But reflectivity can also be used to verify QE measurements. 1 - R > QE, where R is the reflectivity, and over a significant wavelength range, 1 - R = QE. An unconventional reflectometer has been developed to make this measurement. R is measured in two steps, using light from the lateral monochromator port via an optical fiber. The beam intensity is measured directly with aPD, then both the PD and CCD are moved so that the optical path length is unchanged and the light reflects once from the CCD; the PD current ratio gives R. Unlike traditional schemes this approach makes only one reflection from the CCD surface. Since the reflectivity of the LBNL CCDs might be as low as 2 percent this increases the signal to noise ratio dramatically. The goal is a 1 percent accuracy. We obtain good agreement between 1 - R and the direct QE results.

Instrumentation was developed in 2004 and 2005 to measure the quantum efficiency of the Lawrence Berkeley National Lab (LBNL) total-depletion CCD's, intended for astronomy and space applications. This paper describes the basic instrument. Although it is conventional even to the parts list, there are important innovations. A xenon arc light source was chosen for its high blue/UV and low red/IR output as compared with a tungsten light. Intensity stabilization has been difficult, but since only flux ratios matter this is not critical. Between the light source and an Oriel MS257 monochromator are a shutter and two filter wheels. High-bandpass and low-bandpass filter pairs isolate the 150-nm wide bands appropriate to the wavelength, thus minimizing scattered light and providing order blocking. Light from the auxiliary port enters a 20-inch optical sphere, and the 4-inch output port is at right angles to the input port. An 80 cm drift space produces near-uniform illumination on the CCD. Next to the cold CCD inside the horizontal dewar is a calibrated reference photodiode which is regulated to the PD calibration temperature, 25° C. The ratio of the CCD and in-dewar reference PD signals provides the QE measurement. Additional cross-calibration to a PD on the integrating sphere permits lower-intensity exposures.

Author(s): Karcher, Armin; Bebek, Chris J.; Fabricius, Maximilian; Krieger, Brad; Lippe, Henrik vd; Redelstab, Marcus; Walder, Jean-Peirre | Abstract: The CRIC (CCD Readout IC) ASIC has been designed to meet the power, space and radiation requirements of the SNAP satellite. It incorporates four channels consisting of a pre-amplifier, double correlated sampler and pipeline A/D converter with integrated voltage reference. The CRIC chip has been specifically designed to operate both at room temperature and at typical focal plane temperatures down to 130K. This minimizes wiring complexity while maintaining signal integrity on complex focal planes. CRIC is half of a two ASIC CCD readout system; the other ASIC in development is a bias and clock voltage generator. Also in development, are 16 and 32 channel versions of CRIC for use with hybrid photodiode and near infrared pixel arrays.

The Supernova/Acceleration Probe (SNAP) is a proposed space-based experiment designed to study the dark energy and alternative explanations of the acceleration of the Universe's expansion by performing a series of complementary systematics-controlled astrophysical measurements. We here describe a self-consistent reference mission design that can accomplish this goal with the two leading measurement approaches being the Type Ia supernova Hubble diagram and a wide-area weak gravitational lensing survey. This design has been optimized to first order and is now under study for further modification and optimization. A 2-m three-mirror anastigmat wide-field telescope feeds a focal plane consisting of a 0.7 square-degree imager tiled with equal areas of optical CCDs and near infrared sensors, and a high-efficiency low-resolution integral field spectrograph. The instrumentation suite provides simultaneous discovery and light-curve measurements of supernovae and then can target individual objects for detailed spectral characterization. The SNAP mission will discover thousands of Type Ia supernovae out to z = 3 and will obtain high-signal-to-noise calibrated light-curves and spectra for a subset of > 2000 supernovae at redshifts between z = 0.1 and 1.7 in a northern field and in a southern field. A wide-field survey covering one thousand square degrees in both northern and southern fields resolves {approx} 100 galaxies per square arcminute, or a total of more than 300 million galaxies. With the PSF stability afforded by a space observatory, SNAP will provide precise and accurate measurements of gravitational lensing. The high-quality data available in space, combined with the large sample of supernovae, will enable stringent control of systematic uncertainties. The resulting data set will be used to determine the energy density of dark energy and parameters that describe its dynamical behavior. The data also provide a direct test of theoretical models for the dark energy, including discrimination of vacuum energy due to the cosmological constant and various classes of dynamical scalar fields. If we assume we live in a cosmological-constant-dominated Universe, the matter density, dark energy density, and flatness of space can all be measured with SNAP supernova and weak-lensing measurements to a systematics-limited accuracy of 1%. For a flat universe, the density-to-pressure ratio of dark energy or equation of state w(z) can be similarly measured to 5% for the present value w{sub 0} and {approx} 0.1 for the time variation w' {triple_bond} dw/d ln a|{sub z=1}. For a fiducial SUGRA-inspired universe, w{sub 0} and w' can be measured to an even tighter uncertainty of 0.03 and 0.06 respectively. Note that no external priors are needed. As more accurate theoretical predictions for the small-scale weak-lensing shear develop, the conservative estimates adopted here for space-based systematics should improve, allowing even tighter constraints. While the survey strategy is tailored for supernova and weak gravitational lensing observations, the large survey area, depth, spatial resolution, time-sampling, and nine-band optical to NIR photometry will support additional independent and/or complementary dark-energy measurement approaches as well as a broad range of auxiliary science programs.

The Supernova Acceleration Probe (SNAP) will use Type Ia supernovae (SNe Ia) as distance indicators to measure the effect of dark energy on the expansion history of the Universe. (SNAP's weak-lensing program is described in a companion White Paper.) The experiment exploits supernova distance measurements up to their fundamental systematic limit; strict requirements on the monitoring of each supernova's properties lead to the need for a space-based mission. Results from pre-SNAP experiments, which characterize fundamental SN Ia properties, will be used to optimize the SNAP observing strategy to yield data, which minimize both systematic and statistical uncertainties. SNAP has achieved technological readiness and the collaboration is poised to begin construction., Comment: 12 pages, 4 figures; White paper to the Dark Energy Task Force

For true insight into the nature of dark energy, measurements of the precision and accuracy of the Supernova/Acceleration Probe (SNAP) are required. Precursor or scaled-down experiments are unavoidably limited, even for distinguishing the cosmological constant. They can pave the way for, but should not delay, SNAP by developing calibration, refinement, and systematics control (and they will also provide important, exciting astrophysics).

SNAP is a candidate for the Joint Dark Energy Mission (JDEM) that seeks to place constraints on the dark energy using two distinct methods. The first, Type Ia SN, is discussed in a companion white paper. The second method is weak gravitational lensing, which relies on the coherent distortions in the shapes of background galaxies by foreground mass structures. The excellent spatial resolution and photometric accuracy afforded by a 2-meter space-based observatory are crucial for achieving the high surface density of resolved galaxies, the tight control of systematic errors in the telescope's Point Spread Function (PSF), and the exquisite redshift accuracy and depth required by this project. These are achieved by the elimination of atmospheric distortion and much of the thermal and gravity loads on the telescope. The SN and WL methods for probing dark energy are highly complementary and the error contours from the two methods are largely orthogonal., 17 pages, 6 figures; White paper to the Dark Energy Task Force

We present new characterization results for a large format, 15 um pixel pitch, 2kx4k format, p-channel CCD fabricated on high resistivity silicon at Lawrence Berkeley National Laboratory. The fully-depleted device is 300 um thick and backside illuminated utilizing 4-side buttable packaging. We report on measurements of standard operating characteristics including charge transfer efficiency, readout noise, cosmetics performance, dark current, and well depth. We have also made preliminary measurements of the device's X-Ray energy resolution and tests of device linearity.

The status of CCD development efforts at Lawrence Berkeley National Laboratory is reviewed. Fabrication technologies for the production of back-illuminated, fully depleted CCD’s on 150 mm diameter wafers are described. In addition, preliminary performance results for high-voltage compatible CCD’s, including a 3512 × 3512, 10.5 µm pixel CCD for the proposed SuperNova Acceleration Probe project, are presented.