Search

The present article focuses predominantly on sandy deposits that occur within the Middle Miocene lignite seam at the Tomisławice opencast mine, owned by the Konin Lignite Mine. As a result of mining activity, these siliciclastics were available for direct observation in 2015–2016. They are situated between two lignite benches over a distance of ~500 m in the lower part and ~200 m in the higher part of the exploitation levels. The maximum thickness of these sandy sediments, of a lenticular structure in a S–N cross section, is up to 1.8 m. With the exception of a thin lignite intercalation, these siliciclastics comprise mainly by fine-grained and well-sorted sands, and only their basal and top layers are enriched with silt particles and organic matter. Based on a detailed analysis of the sediments studied (i.e., their architecture and textural-structural features), I present a discussion of their genesis and then propose a model of their formation. These siliciclastics most likely formed during at least two flood events in the overbank area of a Middle Miocene meandering or anastomosing river. Following breaching of the natural river levee, the sandy particles (derived mainly from the main river channel and levees) were deposited on the mire (backswamp) surface in the form of crevasse splays. After each flooding event, vegetation developed on the top of these siliciclastics; hence, two crevasse-splay bodies (here referred to as the older and younger) came into existence. As a result, the first Mid-Polish lignite seam at the Tomisławice opencast mine is currently divided in two by relatively thick siliciclastics, which prevents a significant portion of this seam from being used for industrial purposes.

Sedimentary structures discussed in the present study are genetically linked to ripples that consist of pure sand or alternating sand and mud layers. All types of ripple-related structures, such as climbing-ripple cross-lamination and heterolithic bedding, i.e., flaser, wavy and lenticular (nodular), have been identified for the first time in fluvial strata that have been characterised previously as commonly massive. These small-scale bedforms, produced by migrating ripples, have been documented in a fluvial channel of late Neogene age in central Poland. The abundance and co-occurrence of the structures discussed and their spatial distribution provide evidence of their formation under very low-energy conditions, when flow velocity changed markedly, but was often significantly less than 0.5 m/s. Therefore, these ripple-derived sedimentary structures are here recognised as typical of channel fills of an anastomosing river.

Many geological problems have not been convincingly explained so far and are debatable, for instance the origin and changes of the Neogene depositional environments in central Poland. Therefore, these changes have been reconstructed in terms of global to local tectonic and climatic fluctuations. The examined Neogene deposits are divided into a sub-lignite unit (Koźmin Formation), a lignite-bearing unit (Grey Clays Member), and a supra-lignite unit (Wielkopolska Member). The two lithostratigraphic members constitute the Poznań Formation. The results of facies analysis show that the Koźmin Formation was deposited by relatively high-gradient and well-drained braided rivers. Most likely, they encompassed widespread alluvial plains. In the case of the Grey Clays Member, the type of river in close proximity to which the mid-Miocene low-lying mires existed and then were transformed into the first Mid-Miocene Lignite Seam (MPLS-1), has not been resolved. The obtained results confirm the formation of the Wielkopolska Member by low-gradient, but mostly well-drained anastomosing or anastomosing-to-meandering rivers. The depositional evolution of the examined successions depended on tectonic and climatic changes that may be closely related to the mid-Miocene great tectonic remodelling of the Alpine-Carpathian orogen. This resulted in palaeogeographic changes in its foreland in the form of limiting the flow of wet air and water masses from the south and vertical tectonic movements. [ABSTRACT FROM AUTHOR]

Lignite still plays a key role in the production of electricity in Poland. About one-third of domestic electric energy comes from lignite burned in large power plants that produce megatons (Mt) of bottom ash and fly ash annually. Nearly 11 wt% of the total ash generated by the lignite-fired power industry in Poland comes from lignite extracted from the Konin Lignite Mine. Part of the ash escapes into the atmosphere, and the rest is utilized, which is expensive and often harmful to the environment; hence, geochemical studies of these ashes are fully justified and increasingly carried out. The lignite samples examined in this paper represent the entire vertical section of the first Mid-Polish lignite seam (MPLS-1) mined in opencasts at Jóźwin IIB, Drzewce, and Tomisławice. First, the samples were oxidized (burnt) at one of three temperatures: 100, 850, and 950°C; then the chemical composition of oxides and trace elements was determined according to the ASTM D6349-13 standard. The ashes were rich in SiO2 and CaO; Ba, Sr, and Cu dominated the trace element content. Among the harmful elements found, Pb is of most concern. Only a few elements (Ba, Cu, Pb, Sb) reached values higher than their corresponding Clarke values. Based on the results obtained, it can be concluded that the examined ashes are approximately as harmful to the environment as ashes from other lignite used to generate electricity. Moreover, the increased amount of CaCO3 in the MPLS-1 is beneficial in the process of natural desulphurization. [ABSTRACT FROM AUTHOR]

This paper focuses on the variations of lignite ash along selected sections and mining walls from three lignite opencast mines in central Poland. They are owned by the Konin Lignite Mine, where the first Mid-Polish lignite seam is being mined to produce electricity. Ash content in lignite is important because ash lowers the calorific value of the lignite. The results obtained are based on 266 samples of lignite collected from the Drzewce, Tomisławice, and Jóźwin IIB opencasts. All samples were tested according to ISO 1171 standard procedures, that is, they were first burned at a temperature of 850°C, then the ash content was determined on a dry basis (Ad), before the basic statistical parameters were calculated. The studied lignite seam is characterised by a variable distribution pattern of ash both along selected vertical sections and lignite walls, as well as between the three opencasts. The ash content of individual samples ranged from 6.5 to 69.8 wt%, while the average content in opencast mines varied from 9.7 to 17.6 wt%. The coefficient of variation is large (80.23-96.33%) in the case of the Drzewce and Tomisławice, and low to average (14.53-37.75%) in the case of Jóźwin IIB. Significant ash enrichment of some beds is interpreted in this article as a consequence of floods occurring in a Mid-Miocene mire (backswamp), but also of chemical precipitation. When lignite is burned to generate electricity, a relatively large amount of ash is produced. Therefore, recognition of ash content in lignite, in addition to the chemical composition and phase of ash, is recommended to better protect the environment. At the first stage of protection, it can be best achieved by analysing field samples for ash content. [ABSTRACT FROM AUTHOR]