Search

The objectives of the study were to estimate genetic parameters for milk production traits of Holstein cattle using random regression models (RRMs), and to compare the goodness of fit of various RRMs with homogeneous and heterogeneous residual variances. A total of 126,980 test-day milk production records of the first parity Holstein cows between 2007 and 2014 from the Dairy Cattle Improvement Center of National Agricultural Cooperative Federation in South Korea were used. These records included milk yield (MILK), fat yield (FAT), protein yield (PROT), and solids-not-fat yield (SNF). The statistical models included random effects of genetic and permanent environments using Legendre polynomials (LP) of the third to fifth order (L3-L5), fixed effects of herd-test day, year-season at calving, and a fixed regression for the test-day record (third to fifth order). The residual variances in the models were either homogeneous (HOM) or heterogeneous (15 classes, HET15; 60 classes, HET60). A total of nine models (3 orders of polynomials?3 types of residual variance) including L3-HOM, L3-HET15, L3-HET60, L4-HOM, L4-HET15, L4-HET60, L5-HOM, L5-HET15, and L5-HET60 were compared using Akaike information criteria (AIC) and/or Schwarz Bayesian information criteria (BIC) statistics to identify the model(s) of best fit for their respective traits. The lowest BIC value was observed for the models L5-HET15 (MILK; PROT; SNF) and L4-HET15 (FAT), which fit the best. In general, the BIC values of HET15 models for a particular polynomial order was lower than that of the HET60 model in most cases. This implies that the orders of LP and types of residual variances affect the goodness of models. Also, the heterogeneity of residual variances should be considered for the test-day analysis. The heritability estimates of from the best fitted models ranged from 0.08 to 0.15 for MILK, 0.06 to 0.14 for FAT, 0.08 to 0.12 for PROT, and 0.07 to 0.13 for SNF according to days in milk of first lactation. Genetic variances for studied traits tended to decrease during the earlier stages of lactation, which were followed by increases in the middle and decreases further at the end of lactation. With regards to the fitness of the models and the differential genetic parameters across the lactation stages, we could estimate genetic parameters more accurately from RRMs than from lactation models. Therefore, we suggest using RRMs in place of lactation models to make national dairy cattle genetic evaluations for milk production traits in Korea. [ABSTRACT FROM AUTHOR]

The diurnal patterns in pollen vertical distributions in the lower troposphere were investigated by the LIDAR remote sensing technique. Meteorological and pollen concentration data was measured at the surface using a Burkard 7 day recording volumetric spore sampler. An aerosol extinction coefficient and depolarization ratio of 532 nm was obtained from LIDAR measurements in spring (4 May-2 June) 2009 in Gwagnju, Korea. Depolarization ratios from 0.08 to 0.14 were observed only in daytime (09:00-17:00 local time (LT)) during high pollen concentration days from 4 to 9 May. Vertical distributions in the depolarization ratio with time showed a specific diurnal pattern. Depolarization ratios, which varied from 0.08 to 0.14, were measured near the surface in the morning. High depolarization ratios were detected even up to 2.0 km between 12:00 and 14:00LT but subsequently were observed only close to the surface after 17:00 LT. Low values of depolarization ratios (≤ 0.05) were detected after 18:00 LT until next morning. During the measurement period, the daily variations in the high depolarization ratios close to the surface showed good agreement with those in surface pollen concentrations, which implies that high depolarization ratios can be attributed to high pollen concentrations. The diurnal characteristics in high values of depolarization ratios were closely associated with turbulent transport, which can be caused by increasing temperature and wind speed and decreasing relative humidity. Continuously measured diurnal and vertical characteristics of pollen data can be further used to enhance the accuracy of the pollen-forecasting model via data assimilation studies. [ABSTRACT FROM AUTHOR]

Pb0.65Ba0.35ZrO3 (PBZ) thin films have been grown on MgO (001) substrates by pulsed-laser deposition (PLD). We have compared the structural and dielectric properties of PBZ films grown at various temperatures. A highly c-axis oriented PBZ film has been grown on a MgO (001) substrate at the deposition temperature of 550°C and has also shown the largest tunability among all the PBZ films in capacitance-voltage measurements. The tunability and dielectric loss of the PBZ film was 20% and 0.00959, respectively. In addition, we have compared the temperature coefficient of capacitance (TCC) of a PBZ film with that of a Ba0.5Sr0.5TiO3 (BST) film which is a well-known material applicable to tunable microwave devices. We have confirmed that TCC value of a PBZ thin film was three-times smaller than that of a BST thin film. [ABSTRACT FROM AUTHOR]

An abstract of the article "Residual pelvic after single-event multilevel surgery in spastic hemiplegia," by C. Y. Chung and colleagues is presented.

Background: The acetabular index and center-edge angle are widely used radiographic parameters. However, the exact landmarks for measuring these parameters are not clearly defined. Although their measurement is straightforward when the lateral osseous margin of the acetabular roof coincides with the lateral end of the acetabular sourcil, where these two landmarks disagree, recommendations have differed about which landmark should be used. Using a radiographic parameter with high reliability for predicting residual hip dysplasia helps avoid unnecessary treatment., Questions/purposes: We aimed to (1) compare two landmarks (the lateral osseous margin of the acetabular roof and the lateral end of the acetabular sourcil) for measuring the acetabular index and center-edge angle with respect to intraobserver and interobserver reliability and the predictability of residual hip dysplasia in patients with developmental dysplasia of the hip (DDH) and (2) evaluate longitudinal change in the acetabular edge's shape after closed reduction with the patient under general anesthesia., Methods: Between February 1985 and July 2006, we performed closed reduction with the patient under general anesthesia as well as cast immobilization in 116 patients with DDH. To be included in this study, a patient had to have dislocated-type DDH. We excluded patients with a hip dislocation associated with neuromuscular disease, arthrogryposis, or congenital anomalies of other organs or systems (n = 9); hips that underwent osteotomy within 1 year since closed reduction (n = 8); hips that underwent open reduction because of re-dislocation after closed reduction (n = 4); and hips with Type III or IV osteonecrosis according to Bucholz-Ogden's classification (n = 4). Ninety-one patients were eligible. We excluded 19% (17 of 91) of the patients, who were lost to follow-up before they were 8 years old, leaving 81% (74 of 91 patients) with full preoperative and most-recent data. Ninety-seven percent (72 patients) were girls and 3% (two patients) were boys. The mean ± standard deviation age was 14.0 months ± 6.4 months (range 3-40 months) at the time of closed reduction and 12.1 years ± 2.3 years (range 8.0-16.0 years) at the time of the latest follow-up examination, the duration of which averaged 11 years ± 2.2 years (range 6.5-15.4 years). To investigate whether longitudinal change in the acetabular edge's shape differed among hips with DDH, contralateral hips, and control hips, we identified control participants after searching our hospital's database for patients with a diagnosis of congenital idiopathic hemihypertrophy from October 2000 to November 2006 who had AP hip radiographs taken at 3 years old and then at older than 8 years. From 29 patients who met these criteria, we randomly excluded two male patients to match for sex because girls were predominant in the DDH group. We excluded another female patient from the control group because of a hip radiograph that revealed unacceptable rotation. Eventually, 26 patients were assigned to the control group. Control patients consisted of 24 girls (92%) and two boys (8%). The demographic characteristics of control patients was not different from those of 67 patients with unilateral DDH, except for laterality (left-side involvement: 64% [43 of 67] in the DDH group versus 38% [10 of 26] in the control group; odds ratio 1.7 [95% confidence interval, 1.0-2.8]; p = 0.035). The acetabular index and center-edge angle at 3 years old were measured using the lateral osseous margin of the acetabular roof (AIB and CEAB) and the lateral end of the acetabular sourcil (AIS and CEAS). The treatment outcome was classified as satisfactory (Severin Grade I or II) or unsatisfactory (Grade III or IV). The intraclass correlation coefficient (ICC) was used to compare the intraobserver and interobserver reliability of each method. We compared the predictability of residual hip dysplasia of each method at 3 years old as a proxy using the area under the receiver operating characteristic (AUC) curve. To evaluate longitudinal change in the acetabular edge's shape, we compared the proportion of hips showing coincidence of the two landmarks between 3 years old and the latest follow-up examination. To investigate whether the longitudinal change in the acetabular edge's shape differs among hips with DDH, contralateral hips, and control hips, we compared the proportion of coincidence among the three groups at both timepoints., Results: Intraobserver and interobserver reliabilities were higher for the CEAB (ICC 0.96; 95% CI, 0.94-0.98 and ICC 0.88; 95% CI, 0.81-0.92, respectively) than for the CEAS (ICC 0.81; 95% CI, 0.70-0.88 and ICC 0.69; 95% CI, 0.55-0.79, respectively). The AIB (AUC 0.88; 95% CI, 0.80-0.96) and CEAB (AUC 0.841; 95% CI, 0.748-0.933) predicted residual hip dysplasia better than the AIS (AUC 0.776; 95% CI, 0.67-0.88) and CEAS (AUC 0.72; 95% CI, 0.59-0.84) (p = 0.03 and p = 0.01, respectively). The proportion of hips showing coincidence of the two landmarks increased from 3 years old to the latest follow-up examination in hips with DDH (37% [25 of 67] to 81% [54 of 67]; OR = 8.8 [95% CI, 3.1-33.9]; p < 0.001), contralateral hips (42% [28 of 67] to 85% [57 of 67]; OR = 16.5 [95% CI, 4.2-141.9]; p < 0.001), and control hips (38% [10 of 26] to 88% [23 of 26]; OR = 14 [95% CI, 2.1-592.0]; p = 0.001). The proportion of coincidence in hips with DDH was not different from that in the contralateral hips and control hips at both timepoints., Conclusions: Measuring the acetabular index and center-edge angle at 3 years old using the lateral osseous margin of the acetabular roof has higher reliability for predicting residual hip dysplasia than that using the lateral end of the acetabular sourcil in patients with DDH treated with closed reduction. Measuring the acetabular index and center-edge angle at an early age using the lateral end of the sourcil may lead to overdiagnosis of residual hip dysplasia and unnecessary treatment., Level of Evidence: Level III, diagnostic study.

Background: Interlocking telescopic rods for the management of osteogenesis imperfecta (OI)-related long bone fractures are a modification of the Sheffield rod. An interlocking pin anchors the obturator at the distal epiphysis, which spares the distal joint, while a T-piece anchors the sleeve at the proximal epiphysis. However, these devices are associated with some problems, including failure to elongate and difficulty with removal. A dual interlocking telescopic rod (D-ITR), in which the sleeve and the obturator are anchored with interlocking pins, was developed to address these problems., Questions/purposes: In this study, we compared the D-ITR with an older version of a single interlocking telescopic rod (S-ITR) based on (1) surgery-free survival and rod survival; (2) cessation of rod elongation and elongated length of the rod; and (3) risk of refracture and complications related to the interlocking telescopic system., Methods: This article compares the D-ITR with the S-ITR using a historically controlled, single-surgeon, retrospective design comparing two implants for the management of fractures in children with OI. Before August 2007, we exclusively used the S-ITR (n = 17 patients, 29 tibiae); from July 2008 until October 2014, we exclusively used the D-ITR (n = 17 patients, 26 tibiae). During the 1-year transition period, we performed five of these procedures (two S-ITR in two patients and three D-ITR in three patients), and implant use was based on availability with our preference being the D-ITR during that time when it was available. The general indications for use of both devices were the same: patients with OI and a tibial fracture who were older than 3 to 4 years of age and whose tibial canals were wide enough to accept an intramedullary rod. Younger patients were treated other ways (generally without surgery) and those with narrower canals with thinner, nonelongating rods or Kirschner wires, as indicated. All patients in both groups were available for followup at a minimum of 2 years (mean ± SD, 9.6 ± 3.0 years in the S-ITR group and 5.3 ± 2.1 years in the D-ITR group) except for one patient in the D-ITR group who died > 1 year after the procedure resulting from reasons unrelated to it. For the between-group comparison, we used only the followup data collected up to the ninth postoperative year in the S-ITR group. The truncated followup period of the S-ITR group was a mean of 5.0 ± 1.6 years. The mean age in the S-ITR group was 7 years (range, 3-12 years) and it was 8 years (range, 3-14 years) in the D-ITR group. There were nine boys and 10 girls in each group. Two orthopaedic surgeons other than the operating surgeon performed chart review to address our three research purposes. Survival analyses were performed using the Kaplan-Meier method. The overall pooled risk of refracture and major complications potentially associated with the interlocking telescopic rod system was compared between the groups., Results: With the numbers available, there were no differences between the D-ITR and the S-ITR in terms of mean surgery-free survival time (5.7 [95% confidence interval {CI}, 4.5-6.9] versus 5.1 [95% CI, 4.1-6.1]; years; p = 0.653) or mean rod survival time (7.4 [95% CI, 6.4-8.4] versus 6.0 [95% CI, 5.1-6.9] years; p = 0.120). With the numbers available, cessation of elongation (4% in the D-ITR group versus 19% in the S-ITR group; p = 0.112) and elongated length (45.3 ± 24.3 mm in the D-ITR group versus 44.2 ± 22.3 mm in the S-ITR group; p = 0.855) also did not differ between the groups. The pooled proportions of refracture or complications after the index surgery were higher in the S-ITR group (25 tibias [81%]) than in the D-ITR group (15 tibias [54%]; p = 0.049). Eight tibias in the S-ITR group had proximal migration of the sleeve compared with no patients in the D-ITR group (p = 0.005)., Conclusions: In patients with OI, the modified D-ITR provides effective tibial stabilization with similar or better results than the S-ITR design. Anchoring the sleeve at the proximal epiphysis with an interlocking pin provides better anchorage and allows easier removal., Level of Evidence: Level III, therapeutic study.

The present study investigated the contribution of carcass traits on carcass prices of Holstein steers in Korea. Phenotypic data consisted of 76,814 slaughtered Holsteins (1 to 6 yrs) from all over Korea. The means for live body weight at slaughter (BWT), chilled carcass weight (CWT), dressing percentage (DP), quantity grade index (QGI), eye muscle area (EMA), backfat thickness (BF) and marbling score (MS), carcass unit price (CUP), and carcass sell prices (CSP) were 729.0 kg, 414.2 kg, 56.79%, 64.42, 75.26 cm(2), 5.77 mm, 1.98, 8,952.80 Korean won/kg and 3,722.80 Thousand Korean won/head. Least squares means were significantly different by various age groups, season of slaughter, marbling scores and yield grades. Pearson's correlation coefficients of CUP with carcass traits ranged from 0.12 to 0.62. Besides, the relationships of carcass traits with CSP were relatively stronger than those with CUP. The multiple regression models for CUP and CSP with carcass traits accounted 39 to 63% of the total variation, respectively. Marbling score had maximum economic effects (partial coefficients) on both prices. In addition, the highest standardized partial coefficients (relative economic weights) for CUP and CSP were calculated to be on MS and CWT by 0.608 and 0.520, respectively. Path analyses showed that MS (0.376) and CWT (0.336) had maximum total effects on CUP and CSP, respectively; whereas BF contributed negatively. Further sub-group (age and season of slaughter) analyses also confirmed the overall outcomes. However, the relative economic weights and total path contributions also varied among the animal sub-groups. This study suggested the significant influences of carcass traits on carcass prices; especially MS and CWT were found to govern the carcass prices of Holstein steers in Korea.

The Korean mussel Mytilus coruscus, an endemic marine bivalve mollusk, is economically important. Its population is currently decreasing due to overexploitation and invasion of a more competitive species, Mytilus galloprovincialis. In this study, microsatellite markers for M. coruscus were developed using a cost-effective pyrosequencing technique. Among the 33,859 dinucleotide microsatellite sequences identified, 176 loci that contained more than 8 CA, CT, or AT repeats were selected for primer synthesis. Sixty-four (36.4%) primer sets were produced from the 100- to 200-bp polymerase chain reaction products obtained from 2 M. coruscus individuals. Twenty of these were chosen to amplify DNA from 82 M. coruscus individuals, and 18 polymorphic loci and 2 monomorphic loci were selected as microsatellite markers. The number of alleles and the allele richness of the polymorphic loci ranged from 2 to 22 and from 2.0 to 19.7 with means of 10.8 and 10.1, respectively. Null alleles were detected for all but three loci, which resulted in an observed heterozygosity lower than the expected heterozygosity and therefore an excess of homozygotes. In a cross-species transfer analysis of these markers using 7 Mytilidae species, the locus Mc65 was amplified from all species tested and was found to be polymorphic in all of them. Among the species, M. galloprovincialis, Lithophaga curta, and Hormomya mutabilis showed the same transferability of 25%, but the five amplified loci were polymorphic only in M. galloprovincialis and H. mutabilis. These microsatellite markers may be useful for future resource management and artificial production of juveniles for aquaculture.

The relationship between cerebrovascular disease and an insertion/deletion (I/D) polymorphism in the angiotensin-converting enzyme (ACE) gene is still being debated. The frequency of the DD genotype of the ACE gene was significantly higher in subjects with than those without cerebral infarction in Japan. The aim of the present study was to assess the relationship between ACE gene polymorphism and the development of cerebral infarction in a population from Korea. We examined its possible role as a risk factor in patients with cerebral infarction. The association between ACE gene polymorphism and cerebral infarction was examined in 106 patients with cerebral infarction and 498 controls without cerebral infarction. Frequencies of the genotypes and alleles of the ACE gene were investigated. The ACE genotype was analyzed by the polymerase chain reaction (PCR). The frequency of D allele was 37.7% in patients and 39.1% in controls (chi2 = 0.128, p = 0.720). The frequencies of the genotypes of the ACE gene were II: 39.6%, ID: 45.3%, and DD: 15.1% in patients, and II: 37.1%, ID: 47.6%, and DD: 15.3% in controls (chi2 = 0.127, p = 0.721). There was no significant difference in the frequency of the DD genotype of the ACE gene, and we did not find any association between ACE polymorphism and cerebral infarction. These results indicate that ACE polymorphism is not a risk factor for the development of cerebral infarction in a Korean population.

The cDNA for an immune response gene encoding the low molecular weight polypeptide (LMP7) was cloned and sequenced from a flounder (Paralichthys olivaceus) leukocyte cDNA library. The cDNA clone was 1,160 bp, and composed of an open reading frame of 822 bp that corresponded to a protein of 273 amino acid residues with a calculated mass of 30.5 kDa. The ScanProsite search indicated that the deduced amino acid sequence from the flounder LMP7 contains a proteasome beta-type subunit signature, which is well conserved during evolution. The sequence shares a high degree of identity with other LMP7 sequences varying from a 66% identity with zebra fish (Danio renio) to a 57% identity with the African clawed frog (Xenopus laevis), which was confirmed from a phylogenetic tree. A reverse transcription-polymerase chain reaction (RT-PCR) was used to determine tissue specificity, and the expression of LMP7 was detected from the liver, kidney, leukocyte, and spleen of the flounder.

We have initiated a study of the cytopathology of nucleorhabdoviruses by analyzing the subcellular localization of sonchus yellow net virus (SYNV) genomic and antigenomic RNAs and the encoded polymerase proteins. In situ hybridizations demonstrated that the minus-strand genomic RNA sequences are restricted to the nuclei of infected cells, while the complementary plus-strand antigenomic RNA sequences are present in both the nuclei and the cytoplasm. Immunofluorescence and immunogold labeling experiments also revealed that the nucleocapsid (N) protein and phosphoprotein (M2) are primarily localized to discrete regions within the nuclei and in virus particles that accumulate in perinuclear spaces. The N protein antiserum specifically labeled the nuclear viroplasms, whereas the M2 antiserum was more generally distributed throughout the nuclei. Antibody detection also indicated that the polymerase (L) protein is present in small amounts in the viroplasm. When the N and M2 proteins were expressed individually from the heterologous potato virus X (PVX) vector, both proteins preferentially accumulated in the nuclei. In addition, viroplasm-like inclusions formed in the nuclei of cells infected with the PVX vector containing the N gene. Fusions of the carboxy terminus of beta-glucuronidase to N and M2 resulted in staining of the nuclei of infected cells following expression from the PVX vector. Deletion analyses suggested that multiple regions of the N protein contain signals that are important for nuclear localization.

An RNA-dependent RNA polymerase activity was found associated with virions of tomato spotted wilt virus (TSWV), a plant- and insect-infecting member of the family Bunyaviridae. Radiolabeled nucleoside triphosphates were incorporated into trichloroacetic acid-precipitable products by detergent-disrupted, purified TSWV virions. Incorporation was reduced to near-background levels when RNase was present in the reaction mixture. The predominantly double-stranded RNA products were RNase-resistant at high but not low salt concentrations. The activity required manganese and was independent of a DNA template. Discrete products of approximately 3.0 kb and heterogeneous smaller products were synthesized that hybridized to purified TSWV RNA and transcripts of cDNA clones encompassing parts of each of the three genomic RNAs. The predominant products were viral sense although significant amounts of viral complementary sense S RNA products were also synthesized.

The sequence of the 5' terminus (or the "trailer" region) of the minus-sense RNA genome of sonchus yellow net virus (SYNV) was determined by dideoxynucleotide termination sequencing of purified viral RNA and cloned cDNAs. The 5'-terminal nucleotide was identified by nuclease P1 digestion of 32P-end-labeled genomic RNA followed by polyethyleneimine cellulose chromatography. The trailer sequence occupies positions 13,561 to 13,720 relative to the 3' end of the genomic RNA and is composed of 160 nucleotides (nt) adjacent to a dinucleotide forming a portion of the "gene junction" sequence at the terminus of the L protein gene. The trailer sequence is longer than the 144-nt plus-strand leader RNA transcribed from the 3' end of the genomic RNA and is the longest trailer sequence yet reported among the nonsegmented negative-strand viruses. As is characteristic of other rhabdovirus genomes, the 3' and 5' termini of the SYNV genome are complementary and are capable of forming a panhandle structure involving 16 of the 18 terminal nucleotides. However, there is no obvious direct nucleotide sequence relatedness between the SYNV trailer sequence and those of animal rhabdoviruses and paramyxoviruses. The existence of a minus-strand leader RNA of the same polarity as the trailer sequence could not be detected in nucleic acid extracted from infected plants under hybridization conditions suitable for detection of the plus-strand leader RNA. In this regard, SYNV differs from vesicular stomatitis virus and is similar to other rhabdoviruses which also fail to accumulate detectable minus-strand leader RNAs.

The complete nucleotide sequence of the L protein gene of sonchus yellow net virus (SYNV), a plant rhabdovirus, was determined by dideoxynucleotide sequencing of cloned cDNAs derived from the negative-strand genomic RNA. The L protein gene is composed of 6401 nucleotides (nt) located between positions 7158 and 13558 relative to the 3' end of the genomic RNA. Sequence analysis suggests that the complementary mRNA contains a 44 nt untranslated 5' leader sequence preceding an open reading frame of 6348 nucleotides that is capable of encoding a polypeptide of 2116 amino acids with a deduced molecular weight of 241,569 Da. The L protein is positively charged, has a high proportion of the amino acids Leu and Ile, and contains putative polymerase and RNA binding domains. Extended alignment of the SYNV L protein amino acid sequence with those of other nonsegmented negative-strand RNA virus polymerases reveals conservation of sequences within 12 blocks that appear sequentially along the protein. A cluster dendrogram derived from the L protein alignments indicates that SYNV is more closely related to animal rhabdoviruses than to the paramyxoviruses and that the animal rhabdoviruses have diverged less from each other than from SYNV.

The nucleotide sequence of the glycoprotein (G) gene of sonchus yellow net virus (SYNV), a plant rhabdovirus, was determined from viral genomic and mRNA cDNA clones. The G cistron is 2045 nucleotides (nt) long and the G protein mRNA open reading frame (ORF), as determined from the cDNA sequence, contains 1896 nt and encodes a protein of 632 amino acids. Immunoblots with antibodies elecited against the purified glycoprotein from virus particles reacted with a fusion protein produced in Escherichia coli, indicating that the cloned ORF encodes the G protein. The 5' end of the G protein mRNA corresponds to nt 5111, relative to the 3' end of the viral (minus sense) genome, as determined by primer extension from mRNA isolated from infected plants, and extends to nt position 7155 on the genomic RNA. A 34-nt untranslated 5' leader sequence and a 115-nt untranslated 3' end flank the ORF on the mRNA. The gene junctions on either side of the G gene on the genomic RNA are identical to those previously described for other SYNV genes and are similar to sequences separating genes of animal rhabdoviruses. The predicted molecular weight of the G protein is 70,215 Da, a value less than the 77,000 Da estimated for the glycosylated G protein from virus particles. The deduced amino acid sequence of the SYNV G protein shares little direct relatedness with the G proteins of other rhabdoviruses, but appears to contain a similar signal sequence, a transmembrane anchor domain, and glycosylation signals. In addition, the SYNV G protein contains a putative nuclear targeting site near the carboxy terminus, which may be involved in transit to the nuclear membrane prior to morphogenesis.