Search

Bismuth ferrite has garnered considerable attention as a promising candidate for magnetoelectric spin-orbit coupled logic-in-memory. As model systems, epitaxial BiFeO3 thin films have typically been deposited at relatively high temperatures (650-800 °C), higher than allowed for direct integration with silicon-CMOS platforms. Here, we circumvent this problem by growing lanthanum-substituted BiFeO3 at 450 °C (which is reasonably compatible with silicon-CMOS integration) on epitaxial BaPb0.75Bi0.25O3 electrodes. Notwithstanding the large lattice mismatch between the La-BiFeO3, BaPb0.75Bi0.25O3, and SrTiO3 (001) substrates, all the layers in the heterostructures are well ordered with a [001] texture. Polarization mapping using atomic resolution STEM imaging and vector mapping established the short-range polarization ordering in the low temperature grown La-BiFeO3. Current-voltage, pulsed-switching, fatigue, and retention measurements follow the characteristic behavior of high-temperature grown La-BiFeO3, where SrRuO3 typically serves as the metallic electrode. These results provide a possible route for realizing epitaxial multiferroics on complex-oxide buffer layers at low temperatures and opens the door for potential silicon-CMOS integration.

The flash Joule heating (FJH) method converts many carbon feedstocks into graphene in milliseconds to seconds using an electrical pulse. This opens an opportunity for processing low or negative value resources, such as coal and plastic waste, into high value graphene. Here, a lab‐scale automation FJH system that allows the synthesis of 1.1 kg of turbostratic flash graphene from coal‐based metallurgical coke (MC) in 1.5 h is demonstrated. The process is based on the automated conversion of 5.7 g of MC per batch using an electrical pulse width modulation system to conduct the bottom‐up upcycle of MC into flash graphene. This study then compare this method to two other scalable graphene synthesis techniques by both a life cycle assessment and a technoeconomic assessment. [ABSTRACT FROM AUTHOR]

3,4‐Dihydroxy‐L‐phenylalanine (DOPA) serves as a post‐translational modification amino acid present in mussel foot proteins. Mussels exploit the exceptional adhesive properties of DOPA to adhere to a wide range of surfaces. This study presents the development of sticky proteins and bacteria through the site‐specific incorporation of DOPA using Genetic Code Expansion Technology. Through the optimization of the DOPA incorporation system, proteins containing DOPA demonstrate significantly improved binding abilities to various organic and metallic materials. The material‐binding capabilities of DOPA to combat different types of biofoulings are harnessed by integrating it into intrinsically disordered proteins. Beyond the creation of adhesive proteins for anti‐biofouling purposes, this highly efficient DOPA incorporation system is also applied to engineer adhesive bacteria, resulting in a remarkable increase in their binding capability to diverse materials including 400 folds of improvement to polyethylene terephthalate (PET). This substantial enhancement in PET binding of these bacteria has allowed to develop a unique approach for PET degradation, showcasing the innovative application of Genetic Code Expansion in cell engineering. [ABSTRACT FROM AUTHOR]

Lithium iron phosphate (LiFePO4, LFP) batteries are widely used in electric vehicles and energy storage systems due to their excellent cycling stability, affordability and safety. However, the rate performance of LFP remains limited due to its low intrinsic electronic and ionic conductivities. In this work, an ex situ flash carbon coating method is developed to enhance the interfacial properties for fast charging. A continuous, amorphous carbon layer is achieved by rapidly decomposing the precursors and depositing carbon species in a confined space within 10 s. Simultaneously, different heteroatoms can be introduced into the surface carbon matrix, which regulates the irregular growth of cathode‐electrolyte interphase (CEI) and selectively facilitates the inorganic region formation. The inorganic‐rich, hybrid conductive CEI not only promotes electron and ion transport but also restricts parasitic side reactions. Consequently, LFP cathodes with fluorinated carbon coatings exhibited the highest capacity of 151 mAh g−1 at 0.2 C and 96 mAh g−1 at 10 C, indicating their excellent rate capability over commercial LFP (58 mAh g−1 at 10 C). This solvent‐free, versatile surface modification is shown for other electrode materials, providing an efficient platform for electrode‐electrolyte interphase engineering through a surface post‐treatment. [ABSTRACT FROM AUTHOR]

In recent years, a promising role of plasmonic metal nanoparticles (NPs) has been demonstrated toward an improvement of the catalytic efficiency of well‐designed hybrid electrocatalysts. In particular, the coupling of plasmonic functionality with the metal‐based core–shell architectures in plasmon‐enhanced electrocatalysis provides a sustainable route to improve the catalytic performances of the catalysts. Herein, the rationally designed AuNPs wrapped with reduced graphene oxide (rGO) spacer along with PdNPs (AuNP@rGO@Pd) as the final composite are reported. The rGO is proposed to promote the reduction of PdO, greatly enhance the conductivity, and catalytic activity of these nanohybrid structures. The plasmon‐enhanced electrocatalytic performance of optimized AuNP@rGO(1)@Pd exhibits an ≈1.9‐ and 1.1‐fold enhanced activity for the hydrogen evolution reaction and oxygen evolution reaction, respectively. The final composite also exhibits a superior stability up to 10000 s compared with the commercial Pd/C. The mechanism of the enhanced catalytic performance is monitored through in situ X‐ray absorption spectroscopy by observing the generated electron density under light irradiation. The results demonstrate that the energetic charge carriers are concentrated in the incorporated PdNPs, allowing higher catalytic performances for the overall water‐splitting reaction. The conclusions herein drawn are expected to shed light on upcoming plasmon‐induced electrocatalytic studies with analogous hybrid nanoarchitectures. Rationally designed core–shell nanostructures consisting of AuNP cores, reduced graphene oxide spacer and PdNPs unveil enhanced activity for H2 and O2 generation under visible light. The surface plasmon resonance‐enhanced performance is correlated with a flow of energy biased toward the excitation of the energetic charge carriers in the Pd active sites, as corroborated by in situ X‐ray absorption spectroscopy. [ABSTRACT FROM AUTHOR]

Bismuth ferrite has garnered considerable attention as a promising candidate for magnetoelectric spin-orbit coupled logic-in-memory. As model systems, epitaxial BiFeO 3 thin films have typically been deposited at relatively high temperatures (650-800 °C), higher than allowed for direct integration with silicon-CMOS platforms. Here, we circumvent this problem by growing lanthanum-substituted BiFeO 3 at 450 °C (which is reasonably compatible with silicon-CMOS integration) on epitaxial BaPb 0.75 Bi 0.25 O 3 electrodes. Notwithstanding the large lattice mismatch between the La-BiFeO 3 , BaPb 0.75 Bi 0.25 O 3 , and SrTiO 3 (001) substrates, all the layers in the heterostructures are well ordered with a [001] texture. Polarization mapping using atomic resolution STEM imaging and vector mapping established the short-range polarization ordering in the low temperature grown La-BiFeO 3 . Current-voltage, pulsed-switching, fatigue, and retention measurements follow the characteristic behavior of high-temperature grown La-BiFeO 3 , where SrRuO 3 typically serves as the metallic electrode. These results provide a possible route for realizing epitaxial multiferroics on complex-oxide buffer layers at low temperatures and opens the door for potential silicon-CMOS integration., (© 2024. This is a U.S. Government work and not under copyright protection in the US; foreign copyright protection may apply.)