Search

Naturally occurring radioactive materials (NORMs) and the presence of toxic metals in drilling fluids/their additives have raised research interests in recent times owing to the risks associated with the exposure times for drillers of petroleum wells. In this study, two drilling fluids A and B were formulated, while two other Mud Samples C and D were obtained from drilled shale and shale-sand formation zones. All four fluids were collected and analyzed for the presence of radioactive and heavy metals. Lead (Pb), mercury (Hg), cadmium Cd), zinc (Zn), chromium (Cr), aluminum (Al), arsenic (As), nickel (Ni), and copper (Cu) were detected in the mud samples. The heavy metal contents of the mud samples are in the following decreasing order of magnitude Hg > Pb > Cd > Cr. In Samples A–D, Hg, Pb, Cr, and Cd were found to have significant concentrations, and the concentrations of these metals increased in the mud samples after they were used for drilling. The concentration of Hg was above the permissible limit. Also, the concentrations of Pb, Cu, As, and Al found in Mud Samples A and B can cause skin irritations over long-term exposures, while Cd, Hg, Zn, and Ni present in the samples were within levels that can cause lung infections or immune breakdown when ingested over long periods. The quantities of Cd, Hg, and Cu detected in Mud Samples C and D can cause skin irritations over long-term exposures, while those of As, Zn, Ni, and Al were seen to have the potential to cause dermal infections/diseases. Based on the results obtained, the cancer risk for the drilling crew lies within 1.1 × 10−3 - 7.7 × 10−3 HQ. The highest dose rate, radium release, and external hazard index were obtained for Mud Sample C whose radium equivalent was judged to be far below the critical safe limit for the drillers. The radium equivalent activity for the two field mud samples (C and D) were estimated to be 27.467 and 22.978 Bq kg−1, respectively, which is the maximum activity obtained for the analyzed samples. The maximum radium equivalent activity for Mud Sample C was estimated as 27.48 Bq kg−1 with a corresponding external hazard index of 0.7. Based on the analysis, there is a significant correlation between the concentration of heavy metals and the radionuclides found in the mud samples.

This study investigates heavy metals and naturally occurring radionuclide materials (NORM) possible presence and pollution rates in oil-based drilling fluids system used to drill an oil and gas well. It also estimates the health risks of the drilling crew due to their exposure to these substances. Measurements from Atomic Absorption Spectrometry (AAS) revealed that, the concentrations of the metals present in the drilling mud samples varied significantly and decreased in the order of ZnAlNiPbCrCuAsHgCd. Generally, amongst all the heavy metals considered, mud sample C had the highest heavy metal concentration when compared to samples A and B, respectively. When compared with the recommended maximum allowable limits, Cd and Ni were found to be higher than the International Reference Standard by factors of Cd (3 mg/kg) and Ni (50 mg/kg). The cancer risk obtained from this present study are 1.1 × 10