Search

A combination of the functionalities of carbon nanotube (CNT)-Si hybrid heterojunctions is presented as a novel method to steer the efficiency of the photovoltaic (PV) cell based on these junctions, and to increase the selectivity and sensitivity of the chemiresistor gas sensor operated with the p-doped CNT layer. The electrical characteristics of the junctions have been tracked by exposing the devices to oxidizing (NO2) and reducing (NH3) molecules. It is shown that when used as PV cells, the cell efficiency can be reversibly steered by gas adsorption, providing a tool to selectively dope the p-type layer through molecular adsorption. Tracking of the current-voltage curve upon gas exposure also allowed to use these cells as gas sensors with an enhanced sensitivity as compared to that provided by a readout of the electrical signal from the CNT layer alone. In turn, the chemiresistive response was improved, both in terms of selectivity and sensitivity, by operating the system under illumination, as the photo-induced charges at the junction increase the p-doping of CNTs making them more sensitive to NH3 and less to NO2.

Despite the astonishing values of the power conversion efficiency reached, in just less than a decade, by the carbon nanotube/silicon (CNT/Si) solar cells, many doubts remain on the underlying transport mechanisms across the CNT/Si heterojunction. Here, by combining transient optical spectroscopy in the femtosecond timescale, X-ray photoemission, and a systematic tracking of I–V curves across all phases of the interlayer SiOx growth at the interface, we grasp the mechanism that adequately preserves charge separation at the junction, hindering the photoexcited carrier recombination. Moreover, supported by ab initio calculations aimed to model the complex CNT–Si heterointerface, we show that oxygen-related states at the interface act as entrapping centers for the photoexcited electrons, thus preventing recombination with holes that can flow from Si to CNT across the SiOx layer.

Carbon nanotubes are challenging materials from the point of view of nanotechnology, because of their peculiar electrical, mechanical and optical properties arising from their monodimensional geometry. Here, the properties of carbon nanotubes are discussed, starting from their crystalline structure, in order to understand their optical, electrical and vibrational behavior. In the second section, the most popular CNT synthesis mechanism are presented, while the last section is devoted to the CNTs applications, focusing on photovoltaic and gas sensor devices.

Here, we investigate the thickness of single-walled (SWCNT) and multi-walled carbon nanotube (MWCNT) random network films by angle-resolved X-ray photoemission spectroscopy. Furthermore, we estimate the absorption coefficient of carbon nanotube (CNT) films through the Lambert–Beer law, by measuring film optical spectra. Moreover, the knowledge of the absorption coefficient provides an easier, reliable, and faster method of investigation for generic CNT film thickness. In addition, the absorption coefficient leads to the information of the absorption length for SWCNT and MWCNT films, which is a physical quantity of fundamental interest for optoelectronic applications, such as light emitting diodes, photovoltaics, and in general light absorbers.

Hybrid carbon nanotube-silicon (CNT-Si) junctions have been investigated by angle resolved photoemission spectroscopy (AR-XPS) with the aim to clarify the effects of a nonstoichiometric silicon oxide buried interface on the overall cell efficiency. A complex silicon oxide interface has been clearly identified and its origin and role in the heterojunction have been probed by exposing the cells to hydrofluoric (HF) and nitric (HNO3) acid. Real-time monitoring of the cell efficiencies during the steps following acid exposure (up to 1 week after etching) revealed a correlation between the thickness and chemical state of the oxide layer and the cell efficiencies. By matching the AR-XPS and Raman spectroscopy with the electrical response data it has been possible to discriminate the effects on the cell efficiency of the buried SiO(x) interface from those related to CNT acid doping. The overall cell behavior recorded for different thicknesses of the SiO(x) interface indicates that the buried oxide layer is likely acting as a passivating/inversion layer in a metal-insulator-semiconductor junction.

An angle resolved X-ray photoemission study of carbon nanotube/silicon hybrid photovoltaic (PV) cells is reported, providing a direct probe of a chemically inhomogeneous, Si–O buried interface between the carbon nanotube (CNT) networked layer and the n-type Si substrate. By changing the photoelectron takeoff angle of the analyzer, a nondestructive in-depth profiling of a CNT/SiOx/SiO2/Si complex interface is achieved. Data are interpreted on the basis of an extensive modeling of the photoemission process from layered structures, which fully accounts for the depth distribution function of the photoemitted electrons. As X-ray photoemission spectroscopy provides direct access to the buried interface, the aging and the effects of chemical etching on the buried interface have been highlighted. This allowed us to show how the thickness and the composition of the buried interface can be related to the efficiency of the PV cell. The results clearly indicate that while SiO2 is related to an increase of the efficie...

The gas response of single-wall carbon nanotubes (SWCNT) functionalized with indium tin oxide (ITO) nanoparticles (NP) has been studied at room temperature and an enhanced sensitivity to ammonia and nitrogen dioxide is demonstrated. The higher sensitivity in the functionalized sample is related to the creation of nano-heterojunctions at the interface between SWCNT bundles and ITO NP. Furthermore, the different response of the two devices upon NO2 exposure provides a way to enhance also the selectivity. This behavior is rationalized by considering a gas sensing mechanism based on the build-up of space-charge layers at the junctions. Finally, full recovery of the signal after exposure to NO2 is achieved by UV irradiation for the functionalized sample, where the ITO NP can play a role to hinder the poisoning effects on SWCNT due to NO2 chemisorption.