Search

In BIPV design (Building Integrated PV) with crystalline silicon (c-Si) solar cells, ventilation is important in order to keep cells as cool as possible. To allow good ventilation it is therefore generally preferable to mount the modules separated from the existing roof. In the case of sloped roofs, the modules are superimposed onto the existing roof and for flat roofs separated tilted mounting structures designed to withstand wind loads are used instead, but both are not real building integrations. In this paper we analyse the behaviour and the energy yield of a 15.36 kWp PV system based on flexible triple junction amorphous silicon modules laminated together with a single ply roofing system. The PV plant has been integrated on a flat roof of a professional school located south of Switzerland. A significant part of the data analysis is done in comparison with three small open-rack plants (reference plants) installed near the integrated plant. An important result was that the thermally insulated nearly horizontal modules showed temperatures higher than for modules mounted on an open-rack structure, especially for sunny days. This created higher power losses due to negative temperature coefficients. On the other hand, the higher temperature reached the level where the main degradation mechanism of a-Si modules could be reversed and better thermal annealing could be observed. This conclusion was arrived at after a direct performance comparison of the thermally insulated plant and the open-rack a-Si reference plant, which has the same module and orientation as the main plant. In order to better understand the thermally insulated nearly horizontal plant behaviour, we analysed and quantified the irradiation difference and optical losses with respect to a 20[degrees] tilted open-rack c-Si power plant. Optical losses for nearly horizontal modules were significant during the winter, partially affecting their low performance. As a main result, the final energy yield of the thermally insulated a-Si plant was almost comparable to a 20[degrees] tilted open-rack c-Si power plant, despite the lower irradiance and higher reflection losses with respect to the latter. Accordingly, compared to c-Si modules, the a-Si technology represents a better choice for thermal insulated BIPV. Keywords: Amorphous silicon; PV modules; Building integrated design; Thermal behaviours; Annealing

Abstract Background Inside the spectrum of non-alcoholic fatty liver disease, simple fatty liver is generally thought of as being "non progressive", differently from non-alcoholic steatohepatitis, which increases in severity due to the presence of apoptosis/inflammation and fibrosis. The "benignity" of fatty liver is widely accepted but conceptually difficult to maintain because the mechanisms underlying this entity are the same ones that determine the more severe form. Findings provide evidence that iron overload is associated with increased liver damage and collagen deposition. Transforming growth factor-beta1 released by hepatic stellate cells during chronic liver injury plays a critical role in liver apoptosis and fibrogenesis. Objective To verify whether both the forms of non-alcoholic fatty liver disease were really dissimilar, evaluating the serum profile of two key parameters, indexes of severity. Methods A total of 123 patients (57 females) participated, forming three groups: forty five patients with fatty liver, 42 patients with non-alcoholic steatohepatitis and 36 with chronic hepatitis C. All had a biopsy-proven diagnosis. Measurements Serum concentrations of transforming growth factor-beta1 and ferritin. Results High concentrations of transforming growth factor-beta1 were noticed in patients suffering from both fatty liver and non-alcoholic steatohepatitis, 129.1 (45.4) versus 116.8 (42.2) ng/mL, P = 0.2; they were significantly superior to those of chronic hepatitis C patients 87.5 (39.5) ng/mL, P < 0.001. Ferritin levels were on average above normal values and similar in the three groups (P = 0.9), also when adjusted for gender (P = 0.5) and age (P = 0.3). Conclusion No difference between serum concentrations of transforming growth factor-beta1 and ferritin in fatty liver and non-alcoholic steatohepatitis suggests that these forms share more common aspects, regarding their progression, than previously thought.

In the framework of the development of new methods for measuring and monitoring soil pollution, this paper deals with the use of magnetic methodologies to monitor the heavy metals presence in soils. In particular it shows a procedure for collecting magnetic susceptibility measurements in order to interpret them as proxy variable for monitoring heavy metals in soils. Magnetic measurements are carried out using a magnetic susceptibility meter with two different probes for in situ field surveys. The experimental procedure is divided in two parts. In the first part we carry out laboratory tests aimed to evaluate, for both the probes, the effective investigation depth for soil, the measurement reproducibility under different conditions, and the influence of water content. We complete this part comparing in situ measurements obtained by means of two probes with different characteristics. In the second part we carry out tests to evaluate the relationships between heavy metal levels and magnetic susceptibility values of soil samples. We investigate the variability of the magnetic susceptibility measurements contaminating different soil samples with well known concentration of heavy metals. Moreover we study the correlation between magnetic susceptibility values and metal concentrations, determined by means of AAS, in soil samples collected during a field survey. Results suggest that a careful check of the experimental procedure play a crucial role for using magnetic susceptibility measurements for heavy metals in situ monitoring. This is very helpful both for improving the quality of data and for making simpler data interpretation. [ABSTRACT FROM AUTHOR]