Search

This paper investigates the issue of how to exploit target location distribution for multiple input multiple output (MIMO) radar waveform design. We consider a MIMO radar aiming to estimate the unknown and random angular location parameters of a point target, whose distribution information can be exploited by the radar. First, we establish the models of the MIMO radar system and the target location distribution. Based on the considered models, we propose the first category of target location distribution exploitation methods by analyzing the radar direction-of-angle (DoA) estimation performance and deriving a general form of posterior Cramer-Rao bound (PCRB) as the lower bound of the mean square error of DoA estimation. Following this, to explore more insights, we proposed the second category of target location distribution exploitation methods by introducing a novel radar metric, probability scaled beampattern (PSBP), from the perspective of radar beampattern. To compare the two methods, we formulate the PCRB and PSBP oriented radar waveform design problems and propose corresponding low-complexity and convergence-guaranteed algorithms to tackle them. Finally, numerical simulations are conducted in different scenarios to provide a comprehensive evaluation and comparison of the radar performance.

This paper proposes a cooperative integrated sensing and communication network (Co-ISACNet) adopting hybrid beamforming (HBF) architecture, which improves both radar sensing and communication performance. The main contributions of this work are four-fold. First, we introduce a novel cooperative sensing method for the considered Co-ISACNet, followed by a comprehensive analysis of this method. This analysis mathematically verifies the benefits of Co-ISACNet and provides insightful design guidelines. Second, to show the benefits of Co-ISACNet, we propose to jointly design the HBF to maximize the network communication capacity while satisfying the constraint of beampattern similarity for radar sensing, which results in a highly dimensional and non-convex problem. Third, to facilitate the joint design, we propose a novel distributed optimization framework based on proximal gradient and alternating direction method of multipliers, namely PANDA. Fourth, we further adopt the proposed PANDA framework to solve the joint HBF design problem for the Co-ISACNet. By using the proposed PANDA framework, all access points (APs) optimize the HBF in parallel, where each AP only requires local channel state information and limited message exchange among the APs. Such framework reduces significantly the computational complexity and thus has pronounced benefits in practical scenarios. Simulation results verify the effectiveness of the proposed algorithm compared with the conventional centralized algorithm and show the remarkable performance improvement of radar sensing and communication by deploying Co-ISACNet.

This paper investigates a hardware-efficient massive multiple-input multiple-output integrated sensing and communication (MIMO-ISAC) system with 1-bit analog-to-digital converters (ADCs)/digital-to-analog converters (DACs). The proposed system, referred to as 1BitISAC, employs 1-bit DACs at the ISAC transmitter and 1-bit ADCs at the sensing receiver, achieving significant reductions in power consumption and hardware costs. For such kind of systems, two 1BitISAC joint transceiver designs, i.e., i) quality of service constrained 1BitISAC design and ii) quality of detection constrained design, are considered and the corresponding problems are formulated. In order to address these problems, we thoroughly analyze the radar detection performance after 1-bit ADCs quantization and the communication bit error rate. This analysis yields new design insights and leads to unique radar and communication metrics, which enables us to simplify the original problems and employ majorization-minimization and integer linear programming methods to solve the problems. Numerical results are provided to validate the performance analysis of the proposed 1BitISAC and to compare with other ISAC configurations. The superiority of the proposed 1BitISAC system in terms of balancing ISAC performance and energy efficiency is also demonstrated.

This paper investigates the issues of the hybrid beamforming design for the orthogonal frequency division multiplexing dual-function radar-communication (DFRC) system in multiple task scenarios involving the radar scanning and detection task and the target tracking task. To meet different task requirements of the DFRC system, we introduce two novel radar beampattern metrics, the average integrated sidelobe to minimum mainlobe ratio (AISMMR) and average peak sidelobe to integrated mainlobe ratio (APSIMR), to characterize the space-frequency spectra in different scenarios. Then, two HBF design problems are formulated for two task scenarios by minimizing the AISMMR and APSIMR respectively subject to the constraints of communication quality-of-service (QoS), power budget, and hardware. Due to the non-linearity and close coupling between the analog and digital beamformers in both the objective functions and QoS constraint, the resultant formulated problems are challenging to solve. Towards that end, a unified optimization algorithm based on a consensus alternating direction method of multipliers (CADMM) is proposed to solve these two problems. Moreover, under the unified CADMM framework, the closed-form solutions of primal variables in the original two problems are obtained with low complexity. Numerical simulations are provided to demonstrate the feasibility and effectiveness of the proposed algorithm.

In this letter, we investigate enhancing the physical layer security (PLS) for the dual-function radar-communication (DFRC) system with hybrid beamforming (HBF) architecture, where the base station (BS) achieves downlink communication and radar target detection simultaneously. We consider an eavesdropper intercepting the information transmitted from the BS to the downlink communication users with imperfectly known channel state information. Additionally, the location of the radar target is also imperfectly known by the BS. To enhance PLS in the considered DFRC system, we propose a novel HBF architecture, which introduces a new integrated sensing and security (I2S) symbol. The secure HBF design problem for DFRC is formulated by maximizing the minimum legitimate user communication rate subject to radar signal-to-interference-plus-noise ratio, eavesdropping rate, hardware and power constraints. To solve this non-convex problem, we propose an alternating optimization based method to jointly optimize transmit and receive beamformers. Numerical simulation results validate the effectiveness of the proposed algorithm and show the superiority of the proposed I2S-aided HBF architecture for achieving DFRC and enhancing PLS.

Hybrid digital/analog architecture and low-resolution analog-to-digital/digital-to-analog converters (ADCs /DACs) are two low-cost implementations for large-scale millimeter wave (mmWave) systems. In this paper, we investigate the problem of constant-envelope transmit beamforming for large-scale multiple-input multiple-output (MIMO) radar system, where the transmit array adopts a hybrid digital/analog architecture with a small number of RF chains and the receive array adopts a fully digital architecture with low-resolution ADCs. We derive the relative entropy between the probability density functions associated with the two test hypotheses under low-resolution ADCs. We formulate our optimization problem by maximizing the relative entropy, subject to the constant envelope and orthogonality constraints. To suboptimally solve the resultant problem, a two-stage framework is developed. In the first stage, we optimize the transmit power at the directions of the target and clutter. In the second stage, an efficient iterative algorithm based on majorization-minimization is presented to obtain the constant-envelope beamformer according to the attained transmit power. Specifically, we apply a quadratic function as the minorizer, leading to a low-complexity solution at each iteration. In addition, to further facilitate low-cost implementation of the constant-envelope beamformer, we consider the problem of one-bit beamforming design and propose an efficient iterative method based on the Nesterov-like gradient method to solve it. Numerical simulations are provided to demonstrate the effectiveness of the proposed schemes.

This work focuses on the use of reconfigurable intelligent surface (RIS) in dual-function radar-communication (DFRC) systems to improve communication capacity and sensing precision, and enhance coverage for both functions. In contrast to most of the existing RIS aided DFRC works where the RIS is modeled as a diagonal phase shift matrix and can only reflect signals to half space, we propose a novel beyond diagonal RIS (BD-RIS) aided DFRC system. Specifically, the proposed BD-RIS supports the hybrid reflecting and transmitting mode, and is compatible with flexible architectures, enabling the system to realize full-space coverage and to achieve enhanced performance. To achieve the expected benefits, we jointly optimize the transmit waveform, the BD-RIS matrices, and sensing receive filters, by maximizing the minimum signal-to-clutter-plus-noise ratio for fair target detection, subject to the constraints of the communication quality of service, different BD-RIS architectures and power budget. To solve the non-convex and non-smooth max-min problem, a general solution based on the alternating direction method of multipliers is provided. Numerical simulations validate the efficacy of the proposed algorithm and show the superiority of the BD-RIS aided DFRC system in terms of both communication and sensing compared to conventional RIS aided DFRC., Comment: IEEE Transactions on Communications, 2024

The OFDM sequences with low correlation sidelobe level (SLCL) is desired in many 5G wireless systems. In this letter, the OFDM sequences and mismatch filter are jointly designed to achieve the SLCL under the constraints of spectra and peak to average power ratio (PAPR). Specifically, we formulate the optimization problem by maximizing the peak side lobe ratio (PSLR) of the cross-correlation between the OFDM sequences and mismatch filter, subject to several practice constraints. To solve the nonconvex problem, an efficient alternating optimization (AltOpt) algorithm is proposed. Numerical simulations are provided to demonstrate the effectiveness of the proposed algorithms.

This paper investigates dynamic hybrid beamforming (HBF) for a dual-function radar-communication (DFRC) system, where the DFRC base station (BS) simultaneously serves multiple single-antenna users and senses a target in the presence of multiple clutters. Particularly, we apply a HBF architecture with dynamic subarrays and double phase shifters in the DFRC BS. Aiming at maximizing the radar mutual information, we consider jointly designing the dynamic HBF of the DFRC system, subject to the constraints of communication quality of service (QoS), transmit power, and analog beamformer. To solve the complicated non-convex optimization, an efficient alternating optimization algorithm based on the majorization-minimization methods is developed. Simulation results verify the advancement of the considered HBF architecture and the effectiveness of the proposed design method.

As a promising technology in beyond-5G (B5G) and 6G, dual-function radar-communication (DFRC) aims to ensure both radar sensing and communication on a single integrated platform with unified signaling schemes. To achieve accurate sensing and reliable communication, large-scale arrays are anticipated to be implemented in such systems, which brings out the prominent issues on hardware cost and power consumption. To address these issues, hybrid beamforming (HBF), beyond its successful deployment in communication-only systems, could be a promising approach in the emerging DFRC ones. In this article, we investigate the development of the HBF techniques on the DFRC system in a self-contained manner. Specifically, we first introduce the basics of the HBF based DFRC system, where the system model and different receive modes are discussed with focus. Then we illustrate the corresponding design principles, which span from the performance metrics and optimization formulations to the design approaches and our preliminary results. Finally, potential extension and key research opportunities, such as the combination with the reconfigurable intelligent surface, are discussed concisely., Comment: This manuscript has not been fully modified

In millimeter-wave (mmWave) dual-function radar-communication (DFRC) systems, hybrid beamforming (HBF) is recognized as a promising technique utilizing a limited number of radio frequency chains. In this work, in the presence of extended target and clutters, a HBF design based on the subarray connection architecture is proposed for a multiple-input multiple-output (MIMO) DFRC system. In this HBF, the double-phase-shifter (DPS) structure is embedded to further increase the design flexibility. We derive the communication spectral efficiency (SE) and radar signal-to-interference-plus-noise-ratio (SINR) with respect to the transmit HBF and radar receiver, and formulate the HBF design problem as the SE maximization subjecting to the radar SINR and power constraints. To solve the formulated nonconvex problem, the joinT Hybrid bRamforming and Radar rEceiver OptimizatioN (THEREON) is proposed, in which the radar receiver is optimized via the generalized eigenvalue decomposition, and the transmit HBF is updated with low complexity in a parallel manner using the consensus alternating direction method of multipliers (consensus-ADMM). Furthermore, we extend the proposed method to the multi-user multiple-input single-output (MU-MISO) scenario. Numerical simulations demonstrate the efficacy of the proposed algorithm and show that the solution provides a good trade-off between number of phase shifters and performance gain of the DPS HBF.

As a cost-effective alternative, hybrid analog and digital beamforming architecture is a promising scheme for millimeter wave (mmWave) system. This paper considers two hybrid beamforming architectures, i.e. the partially-connected and fully-connected structures, for mmWave dual-function radar communication (DFRC) system, where the transmitter communicates with the downlink users and detects radar targets simultaneously. The optimization problems are formulated by minimizing a weighted summation of radar and communication performance, subject to constant modulus and power constraints. To tackle the non-convexities caused by the two resultant problems, effective Riemannian optimization algorithms are proposed. Specifically, for the fully-connected structure, a manifold algorithm based on the alternating direction method of multipliers (ADMM) is developed. While for the partially-connected structure, a low-complexity Riemannian product manifold trust region (RPM-TR) algorithm is proposed to approach the near-optional solution. Numerical simulations are provided to demonstrate the effectiveness of the proposed methods.

Extremely low-resolution (e.g. one-bit) analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) can substantially reduce hardware cost and power consumption for MIMO radar especially with large scale antennas. In this paper, we focus on the detection performance analysis and joint design for the MIMO radar with one-bit ADCs and DACs. Specifically, under the assumption of low signal-to-noise ratio (SNR) and interference-to-noise ratio (INR), we derive the expressions of probability of detection ($\mathcal{P}_d$) and probability of false alarm ($\mathcal{P}_f$) for one-bit MIMO radar and also the theoretical performance gap to infinite-bit MIMO radars for the noise-only case. We further find that for a fixed $\mathcal{P}_f$, $\mathcal{P}_d$ depends on the defined quantized signal-to-interference-plus-noise ratio (QSINR), which is a function of the transmit waveform and receive filter. Thus, an optimization problem arises naturally to maximize the QSINR by joint designing the waveform and filter. For the formulated problem, we propose an alternatin\emph{g} wavefo\emph{r}m and filt\emph{e}r d\emph{e}sign for QSINR maximiza\emph{t}ion (GREET). At each iteration of GREET, the receive filter is upadted via the minimum variance distortionless response (MVDR) method, and the one-bit waveform is optimized based on the alternating direction method of multipliers (ADMM) algorithm where the closed-form solutions are obtained for both the primary and slack variables. Numerical simulations are consistent to the theoretical performance analysis and demonstrate the effectiveness of the proposed design algorithm.

Our task is to remove all facial parts (e.g., eyebrows, eyes, mouth and nose), and then impose visual elements onto the ``blank'' face for augmented reality. Conventional object removal methods rely on image inpainting techniques (e.g., EdgeConnect, HiFill) that are trained in a self-supervised manner with randomly manipulated image pairs. Specifically, given a set of natural images, randomly masked images are used as inputs and the raw images are treated as ground truths. Whereas, this technique does not satisfy the requirements of facial parts removal, as it is hard to obtain ``ground-truth'' images with real ``blank'' faces. To address this issue, we propose a novel data generation technique to produce paired training data that well mimic the ``blank'' faces. In the mean time, we propose a novel network architecture for improved inpainting quality for our task. Finally, we demonstrate various face-oriented augmented reality applications on top of our facial parts removal model. The source codes are released at \href{https://github.com/duxingren14/FaceEraser}{duxingren14/FaceEraser} on github for research purposes., Comment: 18 pages, 15 figures. ICCV 2021, Fifth Workshop on Computer Vision for AR/VR