Search

To enhance the oxidation resistance of Mo-based TZM alloy (Mo-0.5Ti-0.1Zr-0.02C, wt%), a novel MoSi2-ZrB2 composite coating was applied on the TZM substrate by a two-step process comprising the in situ reaction of Mo, Zr, and B4C to form a ZrB2-MoB pre-layer followed by pack siliconizing. The as-packed coating was composed of a multi-layer structure, consisting of a MoB diffusion layer, an MoSi2-ZrB2 inner layer, and an outer layer of mixture of MoSi2 and Al2O3. The composite coating could provide excellent oxidation-resistant protection for the TZM alloy at 1600 °C. The oxidation kinetic curve of the composite coating followed the parabolic rule, and the weight gain of the coated sample after 20 h of oxidation at 1600 °C was only 5.24 mg/cm2. During oxidation, a dense and continuous SiO2-baed oxide scale embedded with ZrO2 and ZrSiO4 particles showing high thermal stability and low oxygen permeability could be formed on the surface of the coating by oxidation of MoSi2 and ZrB2, which could hinder the inward diffusion of oxygen at high temperatures. Concurrently, the MoB inner diffusion layer played an important role in hindering the diffusion of Si inward with regard to the TZM alloy and could retard the degradation of MoSi2, which could also improve the long life of the coating. [ABSTRACT FROM AUTHOR]

To improve the oxidation resistance of Mo-based alloys, a novel (Mo,Hf)Si2-Al2O3 composite coating was fabricated on a Mo-based alloy by the method of slurry sintering. The isothermal oxidation behavior of the coating was evaluated at 1400 °C. The microstructure evolution and phase composition of the coating before and after oxidation exposure were characterized. The anti-oxidant mechanism for the good performance of the composite coating during high-temperature oxidation was discussed. The coating had a double-layer structure consisting of a MoSi2 inner layer and a (Mo,Hf)Si2-Al2O3 outer composite layer. The composite coating could offer more than 40 h of oxidation-resistant protection at 1400 °C for the Mo-based alloy, and the final weight gain rate was only 6.03 mg/cm2 after oxidation. A SiO2-based oxide scale embedded with Al2O3, HfO2, mullite, and HfSiO4 was formed on the surface of the composite coating during oxidation. The composite oxide scale exhibited high thermal stability, low oxygen permeability, and enhanced thermal mismatch between oxide and coating layers, thus improving the oxidation resistance of the coating. [ABSTRACT FROM AUTHOR]

The balance between strength and toughness is of great importance. In this paper, the microstructure and properties of laminated composites in X-Y direction were characterized and analyzed. The effect of the content of α-Al2O3w and MWCNTs on the laminated structure and properties was analyzed, and strengthening mechanisms and toughening mechanisms of the material were discussed. The laminated structure of traditional Cu matrix composites was designed by a combination of flake powder metallurgy and SPS sintering. Compared with spherical Cu, flake Cu can increase the interface contact between matrix and reinforcement phase, which is conducive to the formation of self-assembly of laminated structure in SPS sintering process. The strength and compressive elongation of 1.0 wt.% MWCNTs-1.0 wt.% α-Al2O3w/Cu hybrid laminated composites were the best, reaching 453.43 MPa, 50%, respectively. This is mainly due to the composites containing MWCNTs less than 1.0 wt.% had uniform microstructure and good interfacial bonding, and the loads were effectively transferred from Cu matrix to MWCNTs and α-Al2O3w. At the same time, the large grain size in the plane is favorable for dislocation movement, while the interlayer interface and nanocrystals hinder the combination of dislocation movement perpendicular to the plane to achieve a balance of strength and toughness. [ABSTRACT FROM AUTHOR]

A compact, low-loss, and high-polarized-extinction ratio TM-pass polarizer based on a graphene hybrid plasmonic waveguide (GHPW) has been demonstrated for the terahertz band. A ridge coated by a graphene layer and the hollow HPW with a semiround arch (SRA) Si core is introduced to improve structural compactness and suppress the loss. Based on this, a TM-pass polarizer has been designed that can effectively cut off the unwanted TE mode, and the TM mode passes with negligible loss. By optimizing the angle of the ridge, the height of the ridge, air gap height, and the length of the tapered mode converter, an optimum performance with a high polarization extinction ratio of 30.28 dB and a low insert loss of 0.4 dB is achieved in the 3 THz band. This work provides a scheme for the design and optimization of polarizers in the THz band, which has potential application value in integrated terahertz systems.