Search

Nanoporous copper (np-Cu) has attracted much more attention due to its lower cost compared to other noble metals and high functionality in practical use. Herein, Al100−xCux(x = 13–88 at.%) precursor films with thicknesses of 0.16–1.1 μm were fabricated by varying magnetron co-sputtering parameters. Subsequently, utilizing a one-step dealloying strategy, a series of np-Cu films with ligament sizes ranging from 11.4–19.0 nm were synthesized. The effects of precursor composition and substrate temperature on the microstructure of np-Cu films were investigated. As the atomic ratio of Cu increases from 15 to 34, the np-Cu film detached from the substrate gradually transforms into a bi-continuous ligament-channel structure that is well bonded to the substrate. Furthermore, the novel bi-layer hierarchical np-Cu films were successfully prepared based on single-layer nanoporous films. Our findings not only contribute to the systematic understanding of the modification of the morphology and structure of np-Cu films but also offer a valuable framework for the design and fabrication of other non-noble nanoporous metals with tailored properties. [ABSTRACT FROM AUTHOR]

The intracrystalline ionic environment in microporous zeolite can remarkably modify the excess chemical potential of adsorbed reactants and transition states, thereby influencing the catalytic turnover rates. However, a limit of the rate enhancement for aqueous‐phase dehydration of alcohols appears to exist for zeolites with high ionic strength. The origin of such limitation has been hypothesized to be caused by the spatial constraints in the pores via, e.g. size exclusion effects. It is demonstrated here that the increase in turnover rate as well as the formation of a maximum and the rate drop are intrinsic consequences of the increasingly dense ionic environment in zeolite. The molecularly sized confines of zeolite create a unique ionic environment that monotonically favors the formation of alcohol‐hydronium ion complexes in the micropores. The zeolite microporous environment determines the kinetics of catalytic steps and tailors the impact of ionic strength on catalytic rates. [ABSTRACT FROM AUTHOR]

Due to the high theoretical specific capacity and low cost of Sn, developing Sn‐based anode materials with long life is the key to their practical applications in lithium‐ion batteries. Herein, novel hierarchically porous NiSn alloys with interconnected ligament‐channel networks are synthesized via a two‐step dealloying strategy, involving corrosion of an Al97.5Ni2Sn0.5 precursor in NaOH, followed by partially etching Ni in HNO3. The architecture of the obtained NiSn‐3 h alloy contains the ligaments with the scale of about 115.2 nm and nanowalls with a thickness of several nanometers on the ligament surface, which can enhance the electron/ion transport kinetics and improve the tolerance to volume variation. The NiSn‐3h electrode exhibits superior Li storage performance in terms of satisfactory rate performance and excellent cycling stability with a reversible capacity of 213.9 mAh g−1 at 1 A g−1 after 1000 cycles. More importantly, the Li storage mechanism of NiSn‐3h is unveiled by operando X‐Ray diffraction, revealing the formation of lithiation products with low crystallinity at the end of discharge. In addition, on‐line differential electrochemical mass spectroscopy is used to detect the gas evolution of the NiSn‐3h electrode during the discharge–charge processes. [ABSTRACT FROM AUTHOR]

Ag-Zn alloys are identified as highly active and selective electrocatalysts for CO2 reduction reaction (CO2RR), while how the phase composition of the alloy affects the catalytic performances has not been systematically studied yet. In this study, we fabricated a series of Ag-Zn alloy catalysts by magnetron co-sputtering and further explored their activity and selectivity towards CO2 electroreduction in an aqueous KHCO3 electrolyte. The different Ag-Zn alloys involve one or more phases of Ag, AgZn, Ag5Zn8, AgZn3, and Zn. For all the catalysts, CO is the main product, likely due to the weak CO binding energy on the catalyst surface. The Ag5Zn8 and AgZn3 catalysts show a higher CO selectivity than that of pure Zn due to the synergistic effect of Ag and Zn, while the pure Ag catalyst exhibits the highest CO selectivity. Zn alloying improves the catalytic activity and reaction kinetics of CO2RR, and the AgZn3 catalyst shows the highest apparent electrocatalytic activity. This work found that the activity and selectivity of CO2RR are highly dependent on the element concentrations and phase compositions, which is inspiring to explore Ag-Zn alloy catalysts with promising CO2RR properties. [ABSTRACT FROM AUTHOR]

Acid functionalization of a carbon support allows to enhance the electrocatalytic activity of Pd to hydrogenate benzaldehyde to benzyl alcohol proportional to the concentration of Brønsted‐acid sites. In contrast, the hydrogenation rate is not affected when H2 is used as a reduction equivalent. The different responses to the catalyst properties are shown to be caused by differences in the hydrogenation mechanism between the electrochemical and the H2‐induced hydrogenation pathways. The enhancement of electrocatalytic reduction is realized by the participation of support‐generated hydronium ions in the proximity of the metal particles. [ABSTRACT FROM AUTHOR]