Search

Spatial resolution of scintillator is crucial for high‐quality X‐ray imaging, especially in tiny and complicated electronic component. In this work, PrPP2MnBr4 single crystal is obtained by dual‐solvent evaporation method, which gives an unprecedented high spatial resolution of 104.3 lp/mm, representingstate of the art among non‐lead metal halides. The study also conducts the preparation of large area scintillation screen (10 cm × 10 cm) by solidifying melted salt PrPP2MnBr4, thus giving an excellent X‐ray imaging with spatial resolution of 53.5 lp mm−1, which demonstrates its application on large area detection. [ABSTRACT FROM AUTHOR]

Developing highly sensitive optical thermometers is of great significance due to their capability to enable remote and non-contact temperature measurements, rendering them highly applicable in diverse and harsh environments. Herein we report a temperature-dependent phosphor of 0D metal halide hybrid by incorporating Bi3+ into the (MePPh3)2ZnCl4 matrix. Through Bi3+ doping, the initially non-luminescent (MePPh3)2ZnCl4 matrix exhibits a deep-blue emission centered at 453 nm, with a photoluminescence quantum yield (PLQY) of 5.71% and a Stokes shift of 75 nm at room temperature. Experimental characterization demonstrates that exciton-like luminescence of Bi3+ is mainly responsible for the blue emission. Single crystals of Bi3+-doped (MePPh3)2ZnCl4 show an unusual correlation between photoluminescence (PL) lifetime and temperature. Particularly, the dependence of luminescence lifetime on temperature is most remarkable in the temperature range of 80 to 100 K with an exceptional sensitivity up to 0.09 K−1, representing one of the best levels for thermometry based on PL decay lifetime. Our work not only provides a viable strategy for designing a novel, environmentally friendly, and stable blue emitter, but also paves the way for precise thermometric application at low temperature. [ABSTRACT FROM AUTHOR]

It is imminent to develop phosphors with multiple stimuli responses due to the increasing demand on anti‐counterfeiting and information encryption technologies. Here, a zero dimensional (0D) organic–inorganic hybrid (DPPE)2MnBr4·H2O (DPPE = 4,4‐Difluoropiperidine, 1), which emits green light and exhibits reversible thermo‐ and vapor‐luminescence responses to heat and organic solvents is reported. Specifically, when heated above 100 °C for 30 s, hybrid 1 transforms into yellow‐emitting hybrid 2. Upon exposure to dichloromethane (DCM), it transforms into a red‐emitting hybrid 3. Experimental analysis reveals that Mn2+‐Mn2+ magnetic coupling interactions and coordination configuration transformation are responsible for the obvious switching of photoluminescence. Owing to its extraordinary triple‐mode switching characteristics, enabling luminescence‐adjustable transformations such as green to yellow, green to red, and yellow to red emission, this metal‐halide hybrid is promising for the application in anti‐counterfeiting and information encryption. [ABSTRACT FROM AUTHOR]

Circularly polarized electroluminescence (CPEL) is an active area of research because of its wide application in 3D displays and anti‐counterfeiting. However, it is not trivial to obtain a high asymmetry factor for highly efficient CPELs. Herein, a highly efficient CPEL is demonstrated with a superior asymmetry factor by using a chiral phosphine‐oxide‐passivated perovskite film as an emitter. An in situ‐formed perovskite nanocrystalline (NC) film is obtained by passivation of the chiral phosphine oxide. The as‐formed film exhibits much‐enhanced photoluminescence compared with the pristine film. More importantly, the NC film exhibits excellent chiral photoluminescence with a luminescence dissymmetry factor glum as high as 5.6 × 10−3. Electrically driven light‐emitting diodes based on the NC film exhibited superior device performance with a maximum brightness of 18,783 cd m−2 and a peak external quantum efficiency of 3.6%. More encouragingly, an unprecedented electroluminescence asymmetry factor gEL of up to 0.18 is achieved because of the chiral lattice distortion of the perovskite, which is the state‐of‐the‐art among hybrid materials. [ABSTRACT FROM AUTHOR]

Herein, we describe an efficient method involving the synthesis of diverse quinoxalines using the DMSO/tBuONa/O2 system as a single-electron oxidant to form α-imino radicals and nitrogen radicals for the direct construction of C–N bonds. This methodology provides a novel approach to form α-imino radicals with good reactivity. [ABSTRACT FROM AUTHOR]