Search

Magnetic fields can have profound effects on the motion of electrons in quantum materials. Two-dimensional electron systems subject to strong magnetic fields are expected to exhibit quantized Hall conductivity, chiral edge currents and distinctive collective modes referred to as magnetoplasmons and magnetoexcitons. Generating these propagating collective modes in charge-neutral samples and imaging them at their native nanometre length scales have thus far been experimentally elusive. Here we visualize propagating magnetoexciton polaritons at their native length scales and report their magnetic-field-tunable dispersion in near-charge-neutral graphene. Imaging these collective modes and their associated nano-electro-optical responses allows us to identify polariton-modulated optical and photo-thermal electric effects at the sample edges, which are the most pronounced near charge neutrality. Our work is enabled by innovations in cryogenic near-field optical microscopy techniques that allow for the nano-imaging of the near-field responses of two-dimensional materials under magnetic fields up to 7 T. This nano-magneto-optics approach allows us to explore and manipulate magnetopolaritons in specimens with low carrier doping via harnessing high magnetic fields.

The ability to perform nanometer-scale optical imaging and spectroscopy is key to deciphering the low-energy effects in quantum materials, as well as vibrational fingerprints in planetary and extraterrestrial particles, catalytic substances, and aqueous biological samples. These tasks can be accomplished by the scattering-type scanning near-field optical microscopy (s-SNOM) technique that has recently spread to many research fields and enabled notable discoveries. Herein, it is shown that the s-SNOM, together with scanning probe research in general, can benefit in many ways from artificial-intelligence (AI) and machine-learning (ML) algorithms. Augmented with AI- and ML-enhanced data acquisition and analysis, scanning probe optical nanoscopy is poised to become more efficient, accurate, and intelligent.

Infrared nano-spectroscopy based on scattering-type scanning near-field optical microscopy (s-SNOM) is commonly employed to probe the vibrational fingerprints of materials at the nanometer length scale. However, due to the elongated and axisymmetric tip shank, s-SNOM is less sensitive to the in-plane sample anisotropy in general. In this article, we report an easy-to-implement method to probe the in-plane dielectric responses of materials with the assistance of a metallic disk micro-antenna. As a proof-of-concept demonstration, we investigate here the in-plane phonon responses of two prototypical samples, i.e. in (100) sapphire and x-cut lithium niobate (LiNbO3). In particular, the sapphire in-plane vibrations between 350 cm-1 to 800 cm-1 that correspond to LO phonon modes along the crystal b- and c-axis are determined with a spatial resolution of

Tungsten ditelluride (WTe2) is an atomically layered transition metal dichalcogenide whose physical properties change systematically from monolayer to bilayer and few-layer versions. In this report, we use apertureless scattering-type near-field optical microscopy operating at Terahertz (THz) frequencies and cryogenic temperatures to study the distinct THz range electromagnetic responses of mono-, bi- and trilayer WTe2 in the same multi-terraced micro-crystal. THz nano-images of monolayer terraces uncovered weakly insulating behavior that is consistent with transport measurements. The near-field signal on bilayer regions shows moderate metallicity with negligible temperature dependence. Subdiffractional THz imaging data together with theoretical calculations involving thermally activated carriers favor the semimetal scenario with [Formula: see text] over the semiconductor scenario for bilayer WTe2. Also, we observed clear metallic behavior of the near-field signal on trilayer regions. Our data are consistent with the existence of surface plasmon polaritons in the THz range confined to trilayer terraces in our specimens. Finally, data for microcrystals up to 12 layers thick reveal how the response of a few-layer WTe2 asymptotically approaches the bulk limit.

Scattering-type scanning near-field optical microscopy (s-SNOM) has been widely used to characterize strongly correlated electronic, two dimensional, and plasmonic materials, and it has enormous potential for biological applications. Many of these materials exhibit anisotropic responses that complicate the extraction of dielectric constants from s-SNOM measurements. Here, we generalize our recently developed approach for retrieving the near-field scattering signal from isotropic systems and apply it to anisotropic dielectrics. Specifically, we compare our theoretical results with experimental measurements on modestly anisotropic sapphire that exhibit strong resonances at the infrared frequency range. Good agreement with the experimental result is found. Our result is important for understanding the near-field response of low damping, anisotropic polaritonic states in dielectric media.

Modern scattering-type scanning near-field optical microscopy (s-SNOM) has become an indispensable tool in material research. However, as the s-SNOM technique marches into the far-infrared (IR) and terahertz (THz) regimes, emerging experiments sometimes produce puzzling results. For example, "anomalies" in the near-field optical contrast have been widely reported. In this Letter, we systematically investigate a series of extreme subwavelength metallic nanostructures via s-SNOM near-field imaging in the GHz to THz frequency range. We find that the near-field material contrast is greatly impacted by the lateral size of the nanostructure, while the spatial resolution is practically independent of it. The contrast is also strongly affected by the connectivity of the metallic structures to a larger metallic "ground plane". The observed effect can be largely explained by a quasi-electrostatic analysis. We also compare the THz s-SNOM results to those of the mid-IR regime, where the size-dependence becomes significant only for smaller structures. Our results reveal that the quantitative analysis of the near-field optical material contrasts in the long-wavelength regime requires a careful assessment of the size and configuration of metallic (optically conductive) structures.

Percolation processes are ubiquitous in nature and are responsible for many critical phenomena such as first-order phase transitions and infectious epidemic networks. The optical properties of a percolative medium can generally be captured by the effective medium approximation (EMA) when the degree of percolation and the properties of the constituent materials are properly addressed. However, the important local collective responses of nanoclusters in the deep subwavelength regime are often only phenomenologically addressed in the standard EMA formalism. A comprehensive method that measures local light–matter interactions and registers how the local responses influence global optical properties has yet to be established on a firm basis. In this paper, we use infrared nanoimaging/spectroscopy to investigate percolative gold films in the vicinity of the critical percolation threshold. We demonstrate experimentally and theoretically that the near-field spectra yield quantitative information of the characteristic length scale of the local gold clusters and their relative oscillator strengths. As a result, EMA analysis can be augmented with near-field nano-spectroscopy to yield better predictability of the far-field reflection spectrum at the corresponding spectral range.

The Mott insulator Ca2RuO4 is the subject of much recent attention following reports of emergent nonequilibrium steady states driven by applied electric fields or currents. In this paper, we carry out infrared nano-imaging and optical-microscopy measurements on bulk single crystal Ca2RuO4 under conditions of steady current flow to obtain insight into the current-driven insulator-to-metal transition. We observe macroscopic growth of the current-induced metallic phase, with nucleation regions for metal and insulator phases determined by the polarity of the current flow. A remarkable metal-insulator-metal microstripe pattern is observed at the phase front separating metal and insulator phases. The microstripes have orientations tied uniquely to the crystallographic axes, implying a strong coupling of the electronic transition to lattice degrees of freedom. Theoretical modeling further illustrates the importance of the current density and confirms a submicron-thick surface metallic layer at the phase front of the bulk metallic phase. Our work confirms that the electrically induced metallic phase is nonfilamentary and is not driven by Joule heating, revealing remarkable new characteristics of electrically induced insulator-metal transitions occurring in functional correlated oxides.

Recent progress in ultrafast spectroscopy and semiconductor technology is enabling unique applications in screening, detection, and diagnostics in the Terahertz (T-ray) regime. The promise of efficaciously operation in this spectral region is tempered by the lack of devices that can spectrally analyze samples at sufficient temporal and spatial resolution. Real-time, multispectral T-ray (Mul-T) imaging is reported by designing and demonstrating hyperspectral metamaterial focal plane array (MM-FPA) interfaces allowing multiband (and individually tunable) responses without compromising on the pixel size. These MM-FPAs are fully compatible with existing microfabrication technologies and have low noise when operating in the ambient environment. When tested with a set of frequency switchable quantum cascade lasers (QCLs) for multicolor illumination, both MM-FPAs and QCLs can be tuned to operate at multiple discrete THz frequencies to match analyte "fingerprints." Versatile imaging capabilities are presented, including unambiguous identification of concealed substances with intrinsic and/or human-engineered THz characteristics as well as effective diagnosis of cancerous tissues without notable spectral signatures in the THz range, underscoring the utility of applying multispectral approaches in this compelling wavelength range for sensing/identification and medical imaging.

Broadband tunability is a central theme in contemporary nanophotonics and metamaterials research. Combining metamaterials with phase change media offers a promising approach to achieve such tunability, which requires a comprehensive investigation of the electromagnetic responses of novel materials at subwavelength scales. In this work, we demonstrate an innovative way to tailor band-selective electromagnetic responses at the surface of a heavy fermion compound, samarium sulfide (SmS). By utilizing the intrinsic, pressure sensitive, and multi-band electron responses of SmS, we create a proof-of-principle heavy fermion metamaterial, which is fabricated and characterized using scanning near-field microscopes with