Search

The Covid-19 pandemic escalated demand for scientific explanations and guidance, creating opportunities for scientists to become publicly visible. In this study, we compared characteristics of visible scientists during the first year of the Covid-19 pandemic (January to December 2020) across 16 countries. We find that the scientists who became visible largely matched socio-cultural criteria that have characterised visible scientists in the past (e.g., age, gender, credibility, public image, involvement in controversies). However, there were limited tendencies that scientists commented outside their areas of expertise. We conclude that the unusual circumstances created by Covid-19 did not change the phenomenon of visible scientists in significant ways.

A novel fire-resistant adhesive made from polyvinyl alcohol, urea, phosphoric acid, and starch was demonstrated for use as a binder and fire retardant to produce ultra-low density fibreboard (ULDF) with clear environmental benefits. The results from Fourier transform infrared spectroscopy showed the presence of chemical bonding between fire- resistant adhesives and ULDFs. The limiting oxygen index (LOI), combustion behaviour, and thermal stability were characterized using a LOI text, cone calorimeter, and thermal analyzer, respectively. The results demonstrated that the LOI value of the fire-retardant ULDF can reach up to 34.2 with 300 mL of fire-resistant adhesive. It was established that the additive noticeably reduced the peak of heat release rate, total heat release, and total smoke release of ULDF. Their morphologies after combustion were elucidated using a scanning electron microscope, and a char layer in the condensed phase was observed. Thermal analysis showed that the thermal stability of ULDF improved dramatically and the residual weight increased 4-fold, to 48.32%. Therefore, such ULDFs will be tremendously attractive as renewable, sustainable, and bio-based insulating materials., Validerad; 2016; Nivå 2; 20160331 (aliwan)

Using response surface methodology, the pretreatment conditions of kenaf fibers were optimized to improve the tensile strength of kenaf phloem insulation cotton (KPIC). The effects and interactions of three parameters—sodium hydrate concentration (X1), soaking time (X2), and beating time (X3)—on the tensile strength of the kenaf fibers were investigated. The chemical structure of the specimens was characterized by Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). Sodium hydrate concentration had the greatest effect on kenaf fibers. The maximum tensile strength of 117.6 N resulted from a sodium hydrate concentration of 4%, soaking time of 50 h, and beating time of 12 min. As shown by FTIR and XRD, optimized pretreatment generated surface functional groups and increased the tensile strength of fibers. In conclusion, the pretreatment of kenaf fiber significantly improves the tensile strength of KPIC and also improves the retention rate of the chemicals used during the preparation of KPIC., Validerad; 2016; Nivå 2; 20151110 (aliwan)

The preparation conditions of complex fire-retardant (FR) agents containing boron compounds (BF, X1), nitrogen-phosphorus compounds (NPF, X2), silicon compounds (SF, X3), and halogen compounds (HF, X4) for ultra-low density fiberboard (ULDF) were optimized using a response surface methodology. The effects and interactions of X1, X2, X3, and X4 on the fire properties of ULDF were investigated. An optimum char yield of 61.4% was obtained when the complex fire-retardant agents contained 33.9% boron, 27.2% nitrogen-phosphorus, 15.0% silicon, and 28.6% halogen. Compared with control fiberboard (CF), the heat release rate (HRR) profiles of all fiberboards with FRs were reduced. The peak HRR reduction in BF and NPF was more pronounced than for SF and HF at this stage. And the mixed fiberboard (MF) had the lowest pkHRR of 75.02 kW m−2. In total heat release (THR) profiles, all fiberboards with FRs were lower than the CF. Unlike the HRR profiles, HF had the lowest THR profile of 15.33 MJ/m−2. Additionally, Si compounds showed greater effectiveness in preventing ULDF mass loss than BF, NPF, and HF. MF showed the highest residual mass (40.94%). Furthermore, the synergistic effect between four FR agents showed more significant results in ULDFs., Validerad; 2016; Nivå 2; 20151022 (aliwan)

To clarify how the fire performance of ultra-low density fiberboard (ULDF) can be improved by complex fire-retardants, the limiting oxygen index (LOI) and microstructure of ULDFs with different additive amounts of complex fire-retardants was analyzed. The char yield, chemical bonding, and thermostability of ULDFs treated by different temperatures were also tested. Results showed that the LOI values and compactness of ULDFs were increased with increased amounts of fire-retardants. Three steps of char yield curves in control fiberboard (CF) and mixed fiberboard (MF) were apparent. The preliminary degradation in lignin and cellulose of CF occurred at 300 °C. The cellulose had completely decomposed at 400 °C, but in the case of MF, the lignin and cellulose were not completely decomposed at 400 °C. It was shown that there are different ways to improve the fire resistance of ULDF using boron, nitrogen-phosphorus, silica, and halogen-based fire-retardants. The fiberboard with silicium compounds had the lowest mass loss in three stages and total mass loss. Compared with CF, MF had a lower mass loss. Furthermore, the exothermic peak for MF at around 400.0 °C was decreased, indicating that the fire resistance of ULDF was improved by the complex fire-retardants., Validerad; 2016; Nivå 2; 2016-12-01 (rokbeg)

Poly vinylidene chloride-vinyl chloride emulsions (PVDC) were added as a substitute for chlorinated paraffin (CP) in the preparation of ultra-low density fiberboards (ULDFs). The micromorphology and fire performance of ULDFs were investigated using a scanning electron microscope, limiting oxygen index instrument, and cone calorimeter. The results showed that PVDC specimens were coated with a regularly smooth film, while the distribution of CP inside CP specimens was uneven. The limiting oxygen index increased with the dosage of PVDC, then reached a plateau at 50 mL and 28%, slightly higher than CP specimens (27.3%). The peak of heat release rate, mean heat release rate, mean CO, and total smoke release of PVDC specimens was reduced 43.3%, 13.5%, 38.5%, and 51.5% lower than respective CP specimens, and with nearly the same total heat release (only 0.04 MJ/m2 higher). Thus, PVDC exhibited excellent heat-reducing and smoke-suppressing properties and could replace CP in ULDFs., Validerad; 2016; Nivå 2; 2016-12-01 (inah)

To improve the mechanical properties of ultra-low density plant fiber composite (ULD_PFC), a suitable beating process to improve the fibrillation of cellulose fibers and maintain their length was investigated. The physical properties of cellulose fibers and papers, surface chemical bonds, and internal bond strength (IB) of ULD_PFCs were analyzed. The results showed that the beating degrees, degree of fibrillation, and fiber fines increased with the decreasing of beating gap, except for the fiber weight-average length, width, kink index, and curl index. The tensile index and burst index of paper showed an increasing trend with an increase in beating degree, while the tear index showed a decreasing trend. FTIR results showed that intermolecular and intramolecular hydrogen bonds in ULDF were broken. A suitable beating gap of 30 μm with a beating degree of 35 °SR was obtained. The corresponding IB was 50.9 kPa, which represented an increase of 73.1% over fibers with a beating degree of 13 °SR., Validerad; 2016; Nivå 2; 2016-11-21 (andbra)

The poly-aluminum silicate sulphate (PASS) for ultra-low density fiberboard (ULDF) was synthesized in the mixed aqueous solution of sodium silicate and aluminum silicate by sol-gel method. Their preparation conditions were optimized by using a response surface methodology. The effects and interactions of Si/Al molar ratio (X1), pH value (X2) and temperature (X3) on internal bond strength of ULDF were investigated. Research showed that the optimum internal bond strength (10.23 ± 0.64 kPa) was obtained under Si/Al molar ratio of 2:1, pH value of 8, and 50oC. Analyses of the Fourier transform infra-red spectroscopy spectra confirmed that Al-O-Si bonds were formed between polysilicate and Al or its hydrolysate. The particle size analysis showed that the average size of PASS was 7.52 μm. And the part of PASS entered the cell wall and made a contribution to the improvement of mechanical properties of ULDF., Validerad; 2015; Nivå 2; 20151022 (aliwan)