Search

A 63-year-old female patient with a history of pulmonary heart disease underwent radiofrequency ablation because of a persistent atrial flutter. Endocardial mapping with the carto3 system confirmed atrial flutter counterclockwise reentry around the tricuspid annulus. Routine ablation of the cavo-tricuspid isthmus line to bi-directional block was performed. However, tachycardia with the same cycle length was induced again. After remapping, the tachycardia was confirmed to be focal atrial tachycardia located in the crista terminalis. After ablation, the tachycardia was terminated and could not be induced again.

The working principle and measurement of ultrasonic machining gap is analyzed in this paper. A stable machining gap between the tool and workpiece must be maintained for improving processing accuracy and efficiency. Therefore, a fuzzy self-tuning PID parameters controller for ultrasonic machining tool feed system is designed, by means of using Matlab /Simulink simulation experiment, in this paper.

In this paper, the method of "hydrophobic modified coating" was used by introducing the low surface energy hydrophobic groups and silica nanoparticles on the surface of towel fabric. A hydrophobic lipophilic cotton fabric with biodegradability and super absorbent capacity was prepared by modifying the surface by silica nanoparticles. The surface structure was characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM). The performance indexes such as oil absorption ratio and oil retention rate were tested and evaluated. The results revealed that the hydrophobicity and oil absorption properties of the cotton fabrics were significantly improved after hydrophobic modification. The water contact angle is 140° and the oil contact angle is 0°, showing strong hydrophobicity of the modified fabric. In addition, the modified cotton fabric had an oil retention rate of 84.6%, which can be avoided as secondary pollution during the recycling of saturated pure cotton fabric. Moreover, the cotton fabric with residual oil can be used for power generation fuel, high fever, high enthalpy, and flammable ashless products. [ABSTRACT FROM AUTHOR]

Fast and highly selective detection of trace amounts of metal ions has become one of the most urgent issues concerning public security and living systems. However, developing a highly efficient fluorescent sensor for metal ions still remains a great challenge. Metal–organic frameworks (MOFs) are a promising class of porous fluorescent sensors towards ion detection. Herein, the anionic MOF FJI-C8 based on the π-conjugated aromatic ligand H6TDPAT (2,4,6-tris(3,5-dicarboxylphenylamino)-1,3,5-triazine) containing uncoordinated nitrogen and carboxylate oxygen atoms was chosen as highly efficient sensor for selective detection of Fe3+. Due to the strong interaction between Fe3+ and Lewis base sites (uncoordinated nitrogen and carboxylate oxygen atoms), the high overlap between the emission spectrum of the anionic FJI-C8 and the absorption spectrum of Fe3+, and the good overlap of the excitation spectrum of the host material FJI-C8 with the absorption spectrum of Fe3+, FJI-C8 exhibited a high sensitivity (0.0233 mM of Fe3+) and extra selectivity (Ksv = 8245 M−1) for the rapid detection (less than 30 s) of Fe3+ with low usage (0.04 mg mL−1 of FJI-C8 suspension). To the best of our knowledge, this is the first example of a luminescent MOF chemosensor based on a trefoil ligand with the highest density of uncoordinated N and carboxylate O atoms for the highly selective detection of Fe3+. It is also crucial to note that this is a first time detection of Fe3+ using both FJI-C8 suspension and solid after filtration, and the results indicate that the detection of Fe3+ using the FJI-C8 suspension is better. This study will pave the way for designing luminescent MOF chemosensors for the detection of Fe3+ ion. [ABSTRACT FROM AUTHOR]