Search

Marine green algae biomass residue (ABR), a waste by-product of Dunaliella tertiolecta, left behind after the extraction of oil from the algal biomass, was utilized for the fabrication of cellulose nanocrystals (CNCs). The fabricated sulphuric acid hydrolysed CNCs had needle-like morphology, with dominant cellulose type I polymorph and a high crystallinity index of 89 %. ICP-MS elemental analysis confirmed the presence of a variety of minerals in the ABR. Washed ABR (WABR)/PLA and CNC/PLA bio-composite films were developed via solvent casting technique with varying bio-filler loadings for comparing their effectiveness on the crystallization behaviour of PLA. FESEM, FTIR, XRD and TGA were used to characterize the bio-fillers. The nucleating and crystallization behaviour of the bio-composite films were confirmed using DSC, SAXS and POM analysis which indicated better effectiveness of CNCs with a significant reduction in cold crystallization temperature, and noteworthy increment in crystallinity and spherulite growth rate., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Two of the main questions regarding cocrystal selection and formulation development are whether the will be stable and how fast can it dissolve the drug dose. Dissolving the drug dose may require cocrystals with a high solubility advantage over drug (SA = S CC / S D ), but these may have limited potential to sustain drug supersaturation. Thus, we propose a twofold approach to mitigate the risk of drug precipitation by optimizing thermodynamic (SA) and kinetic factors (nucleation inhibitors). This risk can be evaluated by considering the cocrystal SA and drug dose/solubility ratio ( D 0D = C dose / S D ), which in tandem represent the maximum theoretical supersaturation that a cocrystal may generate, the driving force for drug precipitation, and the potential for dose-/solubility-limited absorption. cocrystals with SA and D 0D values above critical supersaturation are prone to rapid precipitation, often negating their utility as a solubility enhancement tool. This work presents a mechanistic approach to controlling the dissolution-supersaturation-precipitation behavior of cocrystal systems, whereby relationships between SA, D 0D , and the drug-solubilizing power of surfactants (SP D = S D,T / S D,aq ) are used to fine-tune cocrystal-inherent supersaturation by rational additive selection. Experimental results with danazol-vanillin cocrystal demonstrate how SA, D 0D , and SP D are key thermodynamic parameters to understanding the kinetic cocrystal behavior and how the risks of cocrystal development may be mitigated through the mechanistic formulation design.

As upstream product titers increase, the downstream chromatographic capture step has become a significant "downstream bottleneck." Precipitation becomes more attractive under these conditions as the supersaturation driving force increases with the ever-increasing titer. In this study, two precipitating reagents with orthogonal mechanisms, polyethylene glycol (PEG) as a volume excluder and zinc chloride (ZnCl 2 ) as a cross linker, were examined as precipitants for two monoclonal antibodies (mAbs), one stable and the other aggregation-prone, in purified drug substance and harvested cell culture fluid forms. Manual batch solubility and redissolution experiments were performed as scouting experiments. A high throughput (HTP) liquid handling system was used to investigate the design space as fully as possible while reducing time, labor, and material requirements. Precipitation and redissolution were studied by systematically varying the concentrations of PEG and ZnCl 2 to identify combinations that resulted in high yield and good quality for the stable mAb; PEG concentrations in the range 7-7.5 wt/vol% together with 10 mM ZnCl 2 gave a yield of 97% and monomer contents of about 93%. While yield for the unstable mAb was high, quality was not acceptable. Performance at selected conditions was further corroborated for the stable mAb using a continuous tubular precipitation reactor at the laboratory scale. The HTP automation system was a powerful tool for locating desired (customized) conditions for antibodies of different physicochemical properties., (© 2020 American Institute of Chemical Engineers.)

Biomolecules play key roles in regulating the precipitation of CaCO 3 biominerals but their response to ocean acidification is poorly understood. We analysed the skeletal intracrystalline amino acids of massive, tropical Porites spp. corals cultured over different seawater pCO 2 . We find that concentrations of total amino acids, aspartic acid/asparagine (Asx), glutamic acid/glutamine and alanine are positively correlated with seawater pCO 2 and inversely correlated with seawater pH. Almost all variance in calcification rates between corals can be explained by changes in the skeletal total amino acid, Asx, serine and alanine concentrations combined with the calcification media pH (a likely indicator of the dissolved inorganic carbon available to support calcification). We show that aspartic acid inhibits aragonite precipitation from seawater in vitro, at the pH, saturation state and approximate aspartic acid concentrations inferred to occur at the coral calcification site. Reducing seawater saturation state and increasing [aspartic acid], as occurs in some corals at high pCO 2 , both serve to increase the degree of inhibition, indicating that biomolecules may contribute to reduced coral calcification rates under ocean acidification.

The effect of adding ethylammonium nitrate (EAN), which is an ionic liquid (IL), on the aggregate formation of α-synuclein (α-Syn) in aqueous solution has been investigated. FTIR and Raman spectroscopy were used to investigate changes in the secondary structure of α-Syn and in the states of water molecules and EAN. The results presented here show that the addition of EAN to α-Syn causes the formation of an intermolecular β-sheet structure in the following manner: native disordered state → polyproline II (PPII)-helix → intermolecular β-sheet (α-Syn amyloid-like aggregates: α-SynA). Although cations and anions of EAN play roles in masking the charged side chains and PPII-helix-forming ability involved in the formation of α-SynA, water molecules are not directly related to its formation. We conclude that EAN-induced α-Syn amyloid-like aggregates form at hydrophobic associations in the middle of the molecules after masking the charged side chains at the N- and C-terminals of α-Syn., (© 2020 Wiley Periodicals, Inc.)

Biochemical methods of transfection, including calcium phosphate-mediated and diethylaminoethyl (DEAE)-dextran-mediated transfection, have been used for many years to deliver nucleic acids into cultured cells. Here, we briefly review the use of calcium phosphate-DNA coprecipitates for transfection., (© 2019 Cold Spring Harbor Laboratory Press.)

The characterization of intestinal dissolution of poorly soluble drugs represents a key task during the development of both new drug candidates and drug products. The bicarbonate buffer is considered as the most biorelevant buffer for simulating intestinal conditions. However, because of its complex nature, being the volatility of CO 2 , it has only been rarely used in the past. The aim of this study was to investigate the effect of a biorelevant bicarbonate buffer on intestinal supersaturation and precipitation of poorly soluble drugs using a gastrointestinal (GI) transfer model. Therefore, the results of ketoconazole, pazopanib, and lapatinib transfer model experiments using FaSSIF bicarbonate were compared with the results obtained using standard FaSSIF phosphate . Additionally, the effect of hydroxypropyl methylcellulose acetate succinate (HPMCAS) as a precipitation inhibitor was investigated in both buffer systems and compared to rat pharmacokinetic (PK) studies with and without coadministration of HPMCAS as a precipitation inhibitor. While HPMCAS was found to be an effective precipitation inhibitor for all drugs in FaSSIF phosphate , the effect in FaSSIF bicarbonate was much less pronounced. The PK studies revealed that HPMCAS did not increase the exposure of any of the model compounds significantly, indicating that the transfer model employing bicarbonate-buffered FaSSIF has a better predictive power compared to the model using phosphate-buffered FaSSIF. Hence, the application of a bicarbonate buffer in a transfer model set-up represents a promising approach to increase the predictive power of this in vitrotool and to contribute to the development of drug substances and drug products in a more biorelevant way.

Calcium phosphate (CaP)-containing materials, such as hydroxyapatite and brushite, are well studied bone grafting materials owing to their similar chemical compositions to the mineral phase of natural bone and kidney calculi. In recent studies, magnesium phosphate (MgP)-containing compounds, such as newberyite and struvite, have shown promise as alternatives to CaP. However, the different ways in degradation and release of Mg 2+ and Ca 2+ ions in vitro may affect the biocompatibility of CaP and MgP-containing compounds. In the present paper, newberyite, struvite, and brushite 3D porous structures were constructed by 3D-plotting combining with a two-step cementation process, using magnesium oxide (MgO) as a starting material. Briefly, 3D porous green bodies fabricated by 3D-plotting were soaked in (NH 4 ) 2 HPO 4 solution to form semi-manufactured 3D porous structures. These structures were then soaked in different phosphate solutions to translate the structures into newberyite, struvite, and brushite porous scaffolds. Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectrometry (EDS) were used to characterize the phases, morphologies, and compositions of the 3D porous scaffolds. The porosity, compressive strength, in vitro degradation and cytotoxicity on MC3T3-E1 osteoblast cells were assessed as well. The results showed that extracts obtained from immersing scaffolds in alpha-modified essential media induced minimal cytotoxicity and the cells could be attached merely onto newberyite and brushite scaffolds. Newberyite and brushite scaffolds produced through our 3D-plotting and two-step cementation process showed the sustained in vitro degradation and excellent biocompatibility, which could be used as scaffolds for the bone tissue engineering.

Microbially induced calcium carbonate precipitation (MICP) is a potential method for improvement of soil. A laboratory study was conducted to investigate the influence of temperatures for soil improvement by MICP. The ureolytic activity experiments, MICP experiments in aqueous solution and sand column using Sporosarcina pasteurii were conducted at different temperatures(10, 15, 20, 25 and 30°C). The results showed there were microbially induced CaCO3 precipitation at all the temperatures from 10 to 30°C. The results of ureolytic activity experiments showed that the bacterial had higher ureolytic activity at high temperatures within the early 20 hours, however, the ureolytic activity at higher temperatures decreased more quickly than at lower temperatures. The results of MICP experiments in aqueous solution and sand column were consistent with tests of ureolytic activity. Within 20 to 50 hours of the start of the test, more CaCO3 precipitation was precipitated at higher temperature, subsequently, the precipitation rate of all experiments decreased, and the higher the temperature, the faster the precipitation rate dropped. The final precipitation amount of CaCO3 in aqueous solution and sand column tests at 10 °C was 92% and 37% higher than that at 30 °C. The maximum unconfined compressive strength of MICP treated sand column at 10 °C was 135% higher than that at 30 °C. The final treatment effect of MICP at lower temperature was better than that at high temperature within the temperature range studied. The reason for better treatment effect at lower temperatures was due to the longer retention time of ureolytic activity of bacteria at lower temperatures., Competing Interests: The authors have declared that no competing interests exist.

Objectives: Supersaturating formulations hold great promise for delivery of poorly soluble active pharmaceutical ingredients (APIs). To profit from supersaturating formulations, precipitation is hindered with precipitation inhibitors (PIs), maintaining drug concentrations for as long as possible. This review provides a brief overview of supersaturation and precipitation, focusing on precipitation inhibition. Trial-and-error PI selection will be examined alongside established PI screening techniques. Primarily, however, this review will focus on recent advances that utilise advanced analytical techniques to increase mechanistic understanding of PI action and systematic PI selection., Key Findings: Advances in mechanistic understanding have been made possible by the use of analytical tools such as spectroscopy, microscopy and mathematical and molecular modelling, which have been reviewed herein. Using these techniques, PI selection can be guided by molecular rationale. However, more work is required to see widespread application of such an approach for PI selection., Summary: Precipitation inhibitors are becoming increasingly important in enabling formulations. Trial-and-error approaches have seen success thus far. However, it is essential to learn more about the mode of action of PIs if the most optimal formulations are to be realised. Robust analytical tools, and the knowledge of where and how they can be applied, will be essential in this endeavour., (© 2018 Royal Pharmaceutical Society.)

Caprylic acid (CA), a naturally occurring eight-carbon fatty acid, has long been used as albumin stabilizer, non-IgG fraction precipitant and bactericidal agent in pharmaceutical industry. The mechanisms through which CA achieves its effects have been correlated with the molecule's protein/lipid binding capacity conferred by its octyl moiety. This article, following an initial review of CA's historical applications, introduces CA's relatively new application in downstream processing of monoclonal antibodies (mAbs). By taking advantage of CA mediated impurity precipitation and virus inactivation, it might be possible to develop a two-column purification process in replacement of the standard three-column process without compromising product quality., (Copyright © 2018 Elsevier Inc. All rights reserved.)

The purpose of the present study was to investigate the precipitation of a drug on the particle surface of its salt in biorelevant media. Pioglitazone (PIO, weak base, pK a  = 5.8) was used as a model drug. The crystal particles of PIO hydrochloride (PIO HCl) were immobilized between two slide glasses. A biorelevant medium was penetrated between the slide glasses under a polarized light microscope. Crystalline precipitates appeared on the surface of PIO HCl within 15 s after contact with the biorelevant media. The crystalline precipitates were suggested to be a free base of PIO by microscopic Raman spectroscopy and powder X-ray diffraction. Bile micelles affected the precipitation patterns on the surface. Hydroxypropylmethylcellulose and hydroxypropylmethylcellulose acetate succinate inhibited the precipitation. The precipitation on the surface of its salt could be an important factor that could affect the dissolution profiles of a drug., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Objective: To identify in vitro inhibitors of xanthine crystallization that have potential for inhibiting the formation of xanthine crystals in urine and preventing the development of the renal calculi in patients with xanthinuria., Methods: The formation of xanthine crystals in synthetic urine and the effects of 10 potential crystallization inhibitors were assessed using a kinetic turbidimetric system with a photometer. The maximum concentration tested for each compound was: 20 mg/L for 3-methylxanthine (3-MX); 40 mg/L for 7-methylxanthine (7-MX), 1-methylxanthine (1-MX), theobromine (TB), theophylline, paraxanthine, and caffeine; 45 mg/L for 1-methyluric acid; 80 mg/L for 1,3-dimethyluric acid; and 200 mg/L for hypoxanthine. Scanning electron microscopy was used to examine the morphology of the crystals formed when inhibitory effects were observed., Results: Only 7-MX, 3-MX, and 1-MX significantly inhibited xanthine crystallization at the tested concentrations. Mixtures of inhibitors had an additive effect rather than a synergistic effect on crystallization., Conclusion: Two of the inhibitors identified here-7-MX and 3-MX-are major metabolites of TB. In particular, after TB consumption, 20% is excreted in the urine as TB, 21.5% as 3-MX, and 36% as 7-MX. Thus, consumption of theobromine could protect patients with xanthinuria from the development of renal xanthine calculi. Clinical trials are necessary to demonstrate these effects in vivo., Competing Interests: I have read the journal's policy and the authors (FG, AC-B and AR) of this manuscript have the following competing interests: Those authors declare that they are the inventors of a pending patent based on some aspects of this work. It is a national (Spanish) patent, which has not been yet licensed. (Patent name: Inhibitors of the crystallization of xanthine. Patent number: P201830385). Those authors confirm that this patent does not alter their adherence to all PLOS ONE policies on sharing data and materials.

Many drug candidates today have a low aqueous solubility and, hence, may show a low oral bioavailability, presenting a major formulation and drug delivery challenge. One way to increase the bioavailability of these drugs is to use a supersaturating drug delivery strategy. The aim of this study was to develop a video-microscopic method, to evaluate the effect of a precipitation inhibitor on supersaturated solutions of the poorly soluble drug tadalafil, using a novel video-microscopic small scale setup. Based on preliminary studies, a degree of supersaturation of 29 was chosen for the supersaturation studies with tadalafil in FaSSIF. Different amounts of hydroxypropyl methyl cellulose (HPMC) were predissolved in FaSSIF to give four different concentrations, and the supersaturated system was then created using a solvent shift method. Precipitation of tadalafil from the supersaturated solutions was monitored by video-microscopy as a function of time. Single-particle analysis was possible using commercially available software; however, to investigate the entire population of precipitating particles (i.e., their number and area covered in the field of view), an image analysis algorithm was developed (multiparticle analysis). The induction time for precipitation of tadalafil in FaSSIF was significantly prolonged by adding 0.01% (w/v) HPMC to FaSSIF, and the maximum inhibition was reached at 0.1% (w/v) HPMC, after which additional HPMC did not further increase the induction time. The single-particle and multiparticle analyses yielded the same ranking of the HPMC concentrations, regarding the inhibitory effect on precipitation. The developed small scale method to assess the effect of precipitation inhibitors can speed up the process of choosing the right precipitation inhibitor and the concentration to be used.

Active pharmaceutical ingredients (APIs) with strongly pH-dependent aqueous solubility can face the problem of precipitating from solution when the pH changes from acidic in the stomach to neutral in the intestine. The present work investigates the effect of two polymeric excipients - polyvinylpyrrolidone (PVP) and Soluplus - on the ability to either prevent precipitation, or to control the size distribution of precipitated particles when precipitation cannot be prevented. Two different APIs were compared, Dabigatran etexilate mesylate and Rilpivirine hydrochloride. The effect of excipient concentration on the precipitation behaviour during pH titration was systematically investigated and qualitatively different trends were observed: in case of Soluplus, which forms a micellar solution when critical micelle concentration is exceeded, precipitation was inhibited in the case of Dabigatran etexilate, which partitioned into the micelles. On the other hand, Rilpivirine precipitated independently of Soluplus concentration. In the case of PVP, which does not form micelles, precipitation could not be avoided. Increased polymer concentration, however prevented the aggregation of precipitated particles into larger cluster. The observed effect of PVP was especially pronounced for Rilpivirine. The main conclusion of this study is that a suitably chosen polymeric excipient can either prevent precipitation altogether or reduce the size of the resulting particles. The mechanism of action, however, seems-specific to a given molecule. It was also shown that the polymer-stabilised particles have a potential to redissolve., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Whey after acid protein precipitation was used as substrate for PHB production in orbital shaker using Alcaligenes latus. Statistical analysis determined the most appropriate hydroxide for pH neutralization of whey after protein precipitation among NH4OH, KOH and NaOH 10%w/v. The results were compared to those of commercial lactose. A scale-up test in a 4L bioreactor was done at 35°C, 750rpm, 7L/min air flow, and 6.5 pH. The PHB was characterized through Fourier Transform Infrared Spectroscopy, thermogravimetry and differential scanning calorimetry. NH4OH provided the best results for productivity (p), 0.11g/L.h, and for polymer yield, (YP/S), 1.08g/g. The bioreactor experiment resulted in lower p and YP/S. PHB showed maximum degradation temperature (291°C), melting temperature (169°C), and chemical properties similar to those of standard PHB. The use of whey as a substrate for PHB production did not affect significantly the final product quality., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The purification of therapeutic proteins is a challenging task with immediate need for optimization. Besides other techniques, aqueous 2-phase extraction (ATPE) of proteins has been shown to be a promising alternative to cost-intensive state-of-the-art chromatographic protein purification. Most likely, to enable a selective extraction, protein partitioning has to be influenced using a displacement agent to isolate the target protein from the impurities. In this work, a new displacement agent (lithium bromide [LiBr]) allowing for the selective separation of the target protein IgG from human serum albumin (represents the impurity) within a citrate-polyethylene glycol (PEG) ATPS is presented. In order to characterize the displacement suitability of LiBr on IgG, the mutual influence of LiBr and the phase formers on the aqueous 2-phase system (ATPS) and partitioning is investigated. Using osmotic virial coefficients (B22 and B23) accessible by composition gradient multiangle light-scattering measurements, the precipitating effect of LiBr on both proteins and an estimation of both protein partition coefficients is estimated. The stabilizing effect of LiBr on both proteins was estimated based on B22 and experimentally validated within the citrate-PEG ATPS. Our approach contributes to an efficient implementation of ATPE within the downstream processing development of therapeutic proteins., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Low-density lipoprotein (LDL) apheresis (LA) is a reliable method to decrease LDL-C concentrations and remains the gold standard therapy in homozygous familial hypercholesterolemia (HoFH). The objective of this study was to compare the efficacy of two LA systems [heparin-induced extracorporeal LDL precipitation (HELP) vs. dextran sulfate adsorption (DS) on the reduction of lipids, inflammatory markers, and adhesion molecules in a sample of genetically defined HoFH subjects (n = 9)]. Fasting blood samples were collected before and after LA. All subjects served as their own control and were first treated with the HELP system then with DS in this single sequence study. Compared with HELP, DS led to significantly greater reductions in total cholesterol (-63.3% vs. -59.9%; P = 0.05), LDL-C (-70.5% vs. -63.0%; P = 0.02), CRP (-75.3% vs. -48.8%; P < 0.0001), and TNF-α (-23.7% vs. +14.7%; P = 0.003). Reductions in the plasma levels of PCSK9 (-45.3% vs. -63.4%; P = 0.31), lipoprotein (a) (-70.6% vs. -65.0%; P = 0.30), E-selectin (-16.6% vs. -18.3%; P = 0.65), ICAM-1 (-4.0 vs. 5.6%; P = 0.56), and VCAM-1 (8.3% vs. -1.8%; P = 0.08) were not different between the two systems. For the same volume of filtered plasma (3,000 mL), however, HELP led to greater reductions in plasma apoB (-63.1% vs. -58.3%; P = 0.04), HDL-C (-20.6% vs. -6.5%; P = 0.003), and PCSK9 (-63.4% vs. -28.5%; P = 0.02) levels. These results suggest that both LA systems are effective in reducing plasma lipids and inflammatory markers in HoFH. Compared with HELP, greater reductions in lipid levels and inflammatory markers were achieved with DS, most likely because this method allows for a larger plasma volume to be filtered. J. Clin. Apheresis 31:359-367, 2016. © 2015 Wiley Periodicals, Inc., (© 2015 Wiley Periodicals, Inc.)

Sword bean (Canavalia gladiata) seeds are a traditional food in Asian countries. In this study, we aimed to determine the optimal methods for the precipitation of sword bean proteins useful for the food development. The soaking time for sword beans was determined by comparing it with that for soybeans. Sword bean proteins were extracted from dried seeds in distilled water using novel methods. We found that most proteins could be precipitated by heating the extract at more than 90 °C. Interestingly, adding magnesium chloride to the extract at lower temperatures induced specific precipitation of a single protein with a molecular weight of approximately 48 kDa. The molecular weight and N-terminal sequence of the precipitated protein was identical to that of canavalin. These data suggested that canavalin was precipitated by the addition of magnesium chloride to the extract. Our results provide important insights into the production of processed foods from sword bean.

HDL cholesterol (HDL-C) efflux function may be a more robust biomarker of coronary artery disease risk than HDL-C. To study HDL function, apoB-containing lipoproteins are precipitated from serum. Whether apoB precipitation affects HDL subspecies composition and function has not been thoroughly investigated. We studied the effects of four common apoB precipitation methods [polyethylene glycol (PEG), dextran sulfate/magnesium chloride (MgCl2), heparin sodium/manganese chloride (MnCl2), and LipoSep immunoprecipitation (IP)] on HDL subspecies composition, apolipoproteins, and function (cholesterol efflux and reduction of LDL oxidation). PEG dramatically shifted the size distribution of HDL and apolipoproteins (assessed by two independent methods), while leaving substantial amounts of reagent in the sample. PEG also changed the distribution of cholesterol efflux and LDL oxidation across size fractions, but not overall efflux across the HDL range. Dextran sulfate/MgCl2, heparin sodium/MnCl2, and LipoSep IP did not change the size distribution of HDL subspecies, but altered the quantity of a subset of apolipoproteins. Thus, each of the apoB precipitation methods affected HDL composition and/or size distribution. We conclude that careful evaluation is needed when selecting apoB depletion methods for existing and future bioassays of HDL function.

Alcoholic precipitation is a critical step to recover RNA of high purity. This chapter describes the principles of alcoholic precipitation as well as a standard, basic protocol with key advices to observe, but numerous variations on the theme are discussed. Indeed, several important parameters, such as the choice of salt, alcohol, or carrier, have to be considered to improve the efficiency of precipitation and the yield of RNA recovery.

Vascular calcification (VC) is a life-threatening complication of CKD. Severe protein restriction causes a shortage of essential amino acids, and exacerbates VC in rats. Therefore, we investigated the effects of dietary l-lysine, the first-limiting amino acid of cereal grains, on VC. Male Sprague-Dawley rats at age 13 weeks were divided randomly into four groups: low-protein (LP) diet (group LP), LP diet+adenine (group Ade), LP diet+adenine+glycine (group Gly) as a control amino acid group, and LP diet+adenine+l-lysine·HCl (group Lys). At age 18 weeks, group LP had no VC, whereas groups Ade and Gly had comparable levels of severe VC. l-Lysine supplementation almost completely ameliorated VC. Physical parameters and serum creatinine, urea nitrogen, and phosphate did not differ among groups Ade, Gly, and Lys. Notably, serum calcium in group Lys was slightly but significantly higher than in groups Ade and Gly. Dietary l-lysine strongly suppressed plasma intact parathyroid hormone in adenine rats and supported a proper bone-vascular axis. The conserved orientation of the femoral apatite in group Lys also evidenced the bone-protective effects of l-lysine. Dietary l-lysine elevated plasma alanine, proline, arginine, and homoarginine but not lysine. Analyses in vitro demonstrated that alanine and proline inhibit apoptosis of cultured vascular smooth muscle cells, and that arginine and homoarginine attenuate mineral precipitations in a supersaturated calcium/phosphate solution. In conclusion, dietary supplementation of l-lysine ameliorated VC by modifying key pathways that exacerbate VC., (Copyright © 2014 by the American Society of Nephrology.)

The intracellular environment contains high concentrations of macromolecules occupying up to 30% of the total cellular volume. Presence of these macromolecules decreases the effective volume available for the proteins in the cell and thus increases the effective protein concentrations and stabilizes the compact protein conformations. Macromolecular crowding created by various macromolecules such as proteins, nucleic acids, and carbohydrates has been shown to have a significant effect on a variety of cellular processes including protein aggregation. Most studies of macromolecular crowding have used neutral, flexible polysaccharides that function primarily via excluded volume effect as model crowding agents. Here we have examined the effects of more rigid polysaccharides on protein structure and aggregation. Our results indicate that rigid and flexible polysaccharides influence protein aggregation via different mechanisms and suggest that, in addition to excluded volume effect, changes in solution viscosity and non-specific protein-polymer interactions influence the structure and dynamics of proteins in crowded environments., (Copyright © 2013 Elsevier B.V. All rights reserved.)

A series of laboratory-scale experiments for examining the feasibility and suitability of using Fe(2+) as the precipitant dosed in the pre-denitrification stage of a modified BAF process employing simultaneous chemical precipitation of TSS and phosphorus were carried out. The effects of dosing Fe(2+) on effluent quality and sludge characteristics of the pre-denitrification stage were assessed with comparing to the cases of no additional chemical dosing and dosing Fe(3+). Results obtained demonstrated a sound performance of synergistic denitrification and chemical precipitation in pre-denitrification of the modified BAF process when dosing Fe salts, which showed enhanced by using Fe(2+) as the dosed precipitant in increasing the denitrification loading rate, exhibiting a better controlling of the residual phosphorus in pre-denitrification effluent, and improving sludge settleability. Dosing Fe salt showed no adverse impact in removing COD, but resulted in a relatively higher SS content in the pre-denitrification effluent., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Objective: The ethanol lock technique has shown great potential to eradicate organisms in biofilms and to treat or prevent central venous catheter related infections. Following instillation of ethanol lock solution, however, the inherent density gradient between blood and ethanol causes gravity induced seepage of ethanol out of the catheter and blood influx into the catheter. Plasma proteins so are exposed to highly concentrated ethanol, which is a classic agent for protein precipitation. We aimed to investigate the precipitating effect of ethanol locks on plasma proteins as a possible cause for reported catheter occlusions., Methods: Plasma samples were exposed in-vitro to ethanol (concentrations ranging from 7 to 70 v/v%) and heparin lock solutions. In catheter studies designed to mimic different in-vivo situations, the catheter tip was placed in a plasma reservoir and the material contained within the catheter was analyzed after ethanol lock instillation. The samples underwent standardized investigation for protein precipitation., Results: Protein precipitation was observed in plasma samples containing ethanol solutions above a concentration of 28%, as well as in material retrieved from vertically positioned femoral catheters and jugular (subclavian) catheters simulating recumbent or head down tilt body positions. Precipitates could not be re-dissolved by dilution with plasma, urokinase or alteplase. Plasma samples containing heparin lock solutions showed no signs of precipitation., Conclusions: Our in-vitro results demonstrate that ethanol locks may be associated with plasma protein precipitation in central venous catheters. This phenomenon could be related to occlusion of vascular access devices locked with ethanol, as has been reported. Concerns should be raised regarding possible complications upon injection or spontaneous gravity induced leakage of such irreversibly precipitated protein particles into the systemic circulation. We suggest limiting the maximum advisable concentration of ethanol to 28 v/v% in catheter lock solutions.

Hydroxypropyl methylcellulose (HPMC) propels self-emulsifying drug delivery systems (SEDDS) to achieve the supersaturated state in gastrointestinal tract, which possesses important significance to enhance oral absorption for poorly water-soluble drugs. This study investigated capacities and mechanisms of HPMC with different viscosities (K4M, K15M and K100M) to inhibit drug precipitation of SEDDS in the simulated gastrointestinal tract environment in vitro. The results showed that HPMC inhibited drug precipitation during the dispersion of SEDDS under gastric conditions by inhibiting the formation of crystal nucleus and the growth of crystals. HPMC had evident effects on the rate of SEDDS lipolysis and benefited the distribution of drug molecules across into the aqueous phase and the decrease of drug sediment. The mechanisms were related to the formed network of HPMC and its viscosities and molecular weight. These results offered a reference for selecting appropriate type of HPMC as the precipitation inhibitor of supersaturatable SEDDS.

Background and Objectives: Busulfan is used as part of a conditioning regimen prior to hematopoietic stem cell transplantation for the treatment of certain cancers and immune deficiency syndromes. Due to its instability in aqueous preparations, busulfan for infusion is prepared from a concentrate and has a relatively short shelf life once prepared. The purpose of this study was to identify the most suitable storage container and temperature to maximize the shelf life of busulfan therapeutic infusions prepared from Busilvex(®)., Methods: Busilvex(®) 6 mg/mL was diluted to 0.55 mg/mL with 0.9 % NaCl and aliquots dispensed into polypropylene syringes, polyvinyl chloride bags, and glass bottles. Three storage temperatures were evaluated: 2-8 °C, 13-15 °C (thermostatically controlled chamber), and room temperature (20 ± 5 °C). At set time points, samples were analysed for busulfan content, using a high-performance liquid chromatography (HPLC) system with ultraviolet detection. The change in pH and osmolarity on storage was also determined, and solutions were inspected visually for formation of a precipitate or colour change. To determine the contribution of precipitation to loss of busulfan content on storage, samples from one time series were treated with the solvent dimethylacetamide prior to HPLC separation and quantitation of busulfan., Results: The results of the active substance content monitoring study over a 48-h period demonstrate that busulfan solution is stable at a 5 % threshold, at 2-8 °C for 16 h in syringes, 14 h in glass bottles, and 6 h in bags. In addition, the period of stability decreases as the temperature increases (4 h at 20 ± 5 °C). The solution is considered to be stable, subject to precipitation liable to be observed regardless of the temperature., Conclusion: The best stability was observed for busulfan solutions placed at 2-8 °C in syringes. This study demonstrated that precipitation, in addition to hydrolysis, has a significant influence on the busulfan content.

Microbiologically induced calcium carbonate precipitation (MICCP) is a naturally occurring biological process that has shown its potential in remediation of a wide range of structural damages including concrete cracks. In this study, genetically engineered microorganisms, capable of producing extracellular polymeric substances (EPSs) as well as inducing MICCP, were developed based on the assumption that the complex of inorganic CaCO(3) and organic EPS would provide a stronger matrix than MICCP alone as biosealant. In order to develop a recombinant biosealant microorganism, the entire Sporosarcina pasteurii urease gene sequences including ureA, ureB, ureC, ureD, ureE, ureF, and ureG from plasmid pBU11 were sub-cloned into the shuttle vector, pUCP18. The newly constructed plasmid, pUBU1, was transformed into two Pseudomonas aeruginosa strains, 8821 and PAO1, to develop recombinants capable of inducing calcite precipitation in addition to their own ability to produce EPS. Nickel-dependent urease activities were expressed from the recombinant P. aeruginosa 8821 (pUBU1) and P. aeruginosa PAO1 (pUBU1), at 99.4% and 60.9% of the S. pasteurii urease activity, respectively, in a medium containing 2mM NiCl(2). No urease activities were detected from the wild type P. aeruginosa 8821 and P. aeruginosa PAO1 under the same growth conditions. Recombinant Pseudomonas strains induced CaCO(3) precipitation at a comparable rate as S. pasteurii and scanning electron microscopy evidenced the complex of CaCO(3) crystals and EPS layers surrounding the cells. The engineered strains produced in this study are expected to serve as a valuable reference to future biosealants that could be applied in the environment. However, the pathogenic potential of P. aeruginosa, used here only as a model system to show the proof of principle, prevents the use of this recombinant organism as a biosealant. In practical applications, other recombinant organisms should be used., (Copyright © 2012 Elsevier B.V. All rights reserved.)

NOM is likely to coat TiO₂ nanoparticles (nano-TiO₂) discharged into the aquatic environment and influence the nanotoxicity to aquatic organisms, which however has not been well investigated. This study explored the influence of nanoparticle surface-bound humic acid (HA, as a model NOM) as well as dissolved HA on the toxicity of nano-TiO₂ to Chlorella sp., with a specific focus on adhesion of the nanoparticles to the algae. Results showed that nano-TiO₂ and the dissolved HA could inhibit the algal growth with an IC₅₀ of 4.9 and 8.4 mg L⁻¹, respectively, while both dissolved and nanoparticle surface-bound HA could significantly alleviate the algal toxicity of nano-TiO₂. IC₅₀ of nano-TiO₂ increased to 18 mg L⁻¹ in the presence of 5 mg L⁻¹ of the dissolved HA and to 48 mg L⁻¹ as the result of surface-saturation by HA. Co-precipitation experiment and transmission electron microscopy observation revealed that both dissolved and nanoparticle surface-bound HA prevented the adhesion of nano-TiO₂ to the algal cells due to the increased electrosteric repulsion. The generation of intracellular reactive oxygen species (ROS) was significantly limited by the dissolved and nanoparticle surface-bound HA. The prevention of adhesion and inhibition of ROS generation could account for the HA-mitigated nanotoxicity., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

An integrated ethanol-methane fermentation system was proposed to resolve wastewater pollution in cassava ethanol production. In the integrated system, wastewater originating from ethanol distillation was treated by two-stage anaerobic digestion and then used in medium for the next batch of ethanol fermentation. Ammonium and other components in the effluent promoted yeast growth and fermentation rate but did not increase the yield of ethanol. Fermentations with the effluent as the nitrogen source showed higher growth and ethanol production rates (0.215 h(-1) and 1.276 g/L/h, respectively) than urea that resulted in corresponding rates of 0.176 h(-1) and 0.985 g/L/h, respectively. Results indicated that anaerobic digestion effluent can be used as nitrogen source for the ethanol fermentation instead of urea in the ethanol-methane fermentation system., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

The present work was to investigate the effects of concentration of (NH(4))(2)HPO(4) (diammonium hydrogen phosphate) setting solution on properties of a tetracalcium phosphate (TTCP)/dicalcium phosphate anhydrous (DCPA)--derived calcium phosphate cement. Experimental results indicated that working/setting time of the cement paste decreased with increasing (NH(4))(2)HPO(4) concentration of the setting solution. After being immersed in Hanks' solution for 1 day or longer, the XRD intensities of initial TTCP and DCPA phases largely decreased, while apatite phase became dominant. More residual TTCP phase was observed in the 1 day-immersed cement prepared from higher concentration setting solutions. Compressive strength of the cement immersed for 1 day was consistently higher than that immersed for 30 min or 7 days. After being immersed for 1 day, the average CS value reached a maximal value (59 MPa) as (NH(4))(2)HPO(4) concentration was increased to 0.6 M, beyond that the cement strength decreased and maintained in a relatively high range of 47-54 MPa. Cells incubated with conditioned medium of Al(2)O(3) powder and with blank medium exhibited similar average viability values (0.80 and 0.78, respectively). The OD value with extractions of cement decreased with increasing (NH(4))(2)HPO(4) concentration of the setting solution. The average 0.25, 0.5 and 0.6 M--OD values were 0.78, 0.67 and 0.66, respectively. When setting solution concentration was greater than 0.6 M, the OD value sharply declined to 0.47.

This study involved the fractionation of equine antivenom F(ab')(2) by combined stepwise ammonium sulfate (AS) and caprylic acid (CA) precipitation without intermediate separation of precipitate. Using a microplate format, 55 conditions with combinations of AS (0-20% saturation) and CA (0-5% v/v), were tested. AS significantly reduced the turbidity raised by CA. High specific antibody activity was observed in the area containing 2-5% CA and 10-20% AS. From these results, 12 precipitation conditions were selected for detailed quantitative studies. Two combinations, one with 4% CA and 15% AS and another with 5% CA and 20% AS, gave the highest fold-purification (1.79 and 1.83) with antibody recoveries at 68% and 59%, respectively. These combinations offered a benefit over CA alone in reducing the turbidity and in increasing the purity but not the recovery of antibody. The conditions giving more favorable overall results were with 2% CA alone and another with a combination of 1.5% CA and 10% AS. These preparations of F(ab')(2) were homogeneous and without protein aggregate under size-exclusion HPLC. Lastly, 1 h precipitation showed better results than those of overnight precipitation. These results could be useful for the production of therapeutic antivenoms., (Copyright © 2012 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.)

Inhibition of calcium oxalate monohydrate (COM) formation and initiation of the dihydrate (COD) phase by osteopontin (OPN) have been proposed to play an important role in preventing kidney stone formation. We have studied the roles of OPN phosphate and carboxylate groups in the modulation of calcium oxalate (CaOx) crystallization using synthetic peptides corresponding to residues 65-80, 129-144, 220-235 and 273-288 of rat OPN. We investigated the effects of these peptides (0-20 μg/ml) on COM and COD formation by correlating qualitative and quantitative microscopic data with the physicochemical characteristics of the peptides used. In general, highly acidic/hydrophilic peptides strongly inhibit COM and promote COD formation. However, OPN129-144, which is basic, and OPN273-288, which is only slightly acidic, also induced COD precipitation. It is likely that inhibition of nucleation and/or growth of COM by OPN peptides maintains a high supersaturation, thereby allowing formation of the more-soluble dihydrate polymorph. In addition, growth of COD from the substrate in <100>/<110> directions suggests that highly acidic OPN peptides may nucleate crystals from the Ca(2+)-rich {100}/{110} faces. At higher peptide concentrations, however, peptides containing either phosphates or contiguous carboxylates inhibit COD, whereas peptides containing both promote COD formation further., (Copyright © 2012 Elsevier B.V. All rights reserved.)

A series of ZnAl layered double hydroxides (LDHs) were prepared by urea hydrolysis-based homogeneous co-precipitation for studying their structure and phosphate adsorption capacities. The results show that all the samples exhibited a typical layered structure as the reaction time extended from 12 h to 96 h, whereas Zn/Al molar ratio in the ZnAls decreased from 2.06 to 0.70 and the specific surface area markedly increased to be 7.6-fold higher than that of ZnAl-12. Phosphate adsorption capacity of the ZnAl was in general increased gradually with the reaction time extension, which can be attributed to the surface area rising as well as the increased positive charge of LDHs layer caused by a higher proportion of Al. This reveals that physicochemical adsorption on LDHs surface would have played an important role during the phosphate adsorption. With a reaction time of 24 h, a high amount of exchangeable interlayer anions was observed, giving rise to a highest phosphate uptake of 34.1 mg x g(-1) by the ZnAl-24. It indicates the ion exchange was another major pathway for the phosphate removal. For all the ZnAls with different reaction times, the phosphate adsorption isotherms fit well with Langmuir-type equations; the adsorption kinetics followed pseudo-second-order models.

A photobioreactor was designed to evaluate the performance of a newly isolated thermo-tolerant microalga Desmodesmus sp. F2 in municipal wastewater under tropical outdoor conditions. The environmental parameters, levels of nutrients, and growth rates were monitored during the cultivations to elucidate the factors that contributed to accelerated growth after lag phase. Cultures bubbled with CO(2)-air had about 20% higher yields than the air-bubbled culture, and 2% of CO(2) at a flux rate of 5L/min was sufficient to reach this increased yield. In the cultures bubbled with CO(2)-air, the microalgal cells preferentially utilized ammonium and nitrate, while the air-bubbled culture made greater use of ammonium and organic nitrogen. In conclusion, the factors required for microalga Desmodesmus sp. F2 to achieve accelerated growth in tropical outdoor conditions include (1) 2% CO(2) bubbling; (2) a level of ammonium higher than 100 μM; and (3) a level of nitrate higher than 400 μM., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

A striking potential of the amphiphilic dipeptides, Arg-Phe or Asp-Phe, to induce aggregation of a model protein, alcohol dehydrogenase in its native-like state, has been demonstrated under physiologically relevant conditions, using dynamic light scattering, fluorescence spectroscopy, circular dichroism, transmission electron- and atomic force microscopy. The peptide action resulted in accumulation of a variety of morphologically distinct supramolecular structures profoundly differing from those generated by the heat-induced aggregation at the early stages of the process, when amyloid fibril assemblies were not detectable. The biogenic amphiphilic agents are suggested to act as regulators of structural transformations of native-like proteins., (Copyright © 2011 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.)

Chromatin immunoprecipitation is widely utilized to determine the in vivo binding of factors that regulate transcription. This procedure entails formaldehyde-mediated cross-linking of proteins and isolation of soluble chromatin followed by shearing. The fragmented chromatin is subjected to immunoprecipitation using antibodies against the protein of interest and the associated DNA is identified using quantitative PCR. Since histones are posttranslationally modified during transcription, this technique can be effectively used to determine the changes in histone modifications that occur during transcription. In this paper, we describe a detailed methodology to determine changes in histone modifications in budding yeast that takes into account reductions in nucleosome.

A study of the potential of autohydrolysis and alkaline extraction processes from corn stalks was performed for high purity hemicellulose extraction. The influence of process parameters on the purity of obtained hemicelluloses was analyzed. An experimental design was developed for the autohydrolysis treatments to determine the optimal conditions to solubilize the hemicelluloses with lowest content in contaminants. On the other hand, alkaline extraction, including raw material pretreatment (dewaxing and delignification step) was carried out analyzing the effectiveness of this processes for maximum pure hemicellulose recovery. The maximum yield (54% of the raw material hemicelluloses) and the best physicochemical properties (highest hemicellulose content free of lignin) were obtained with these pretreatments in alkaline extraction. Moreover, the effect of lignin removal by sulfuric acid from the autohydrolysis liquors before hemicellulose precipitation was studied. This purification step has allowed to obtain lignin-free autohydrolysis hemicellulose but with the presence of sulfur as predominant contaminant., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

After industrial processing, one-third of sugarcane culms is converted into residual bagasse. The xylan-rich hemicellulose components of the bagasse were extracted with hot aqueous alkali (AX-CRUDE). Approximately 82% of the extracted hemicelluloses was precipitated with ethanol (AX-PET). Both AX-CRUDE and AX-PET contained an arabinoxylan as confirmed by 13C NMR and methylation analysis. Fraction AX-PET was fed to female Wistar rats with ethanol-induced gastric lesions. Oral administrations of 30, 100, and 300 mg/kg reduced the gastric lesion area by over 50%, and replenished ethanol-induced depletion of glutathione. The polysaccharide also increased mucus production by over 70%, indicating its cytoprotective action on experimentally induced gastric ulcers. These findings are significant, since a biologically active compound can be extracted in high yields from an abundant, readily available residue., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Phenol was selected as a model compound. Factors, such as Ca2+, tannic acid, dose of kaolinite, dose of manganese dioxide formed in situ and pH, were invested on phenol removal in the process of enhanced coagulation by manganese dioxide formed in situ. Results showed that the addition of Ca2+ is beneficial for phenol removal. In the range of Ca2+ varied from 0 to 1.0 mmol x L(-1), the efficiency of phenol removal was enhanced more than 10%. Tannic acid can enhance phenol removal significantly when they are coexisted in water. As tannic acid was added to 10 mg x L(-1), phenol removal can be increased about 30% and 50% in the process of coagulation by AlCl3 and enhanced coagulation by manganese dioxide formed in situ, respectively. The dose of coagulant can be reduced in the process of enhanced coagulation with the addition of manganese dioxide formed in situ. The point of 1 mg x L(-1) manganese dioxide formed in situ linked with 30 mg x L(-1) AlCl3 can have the same phenol removal efficiency as the addition of 50 mg x L(-1) AlCl3. In the range of pH varied from 5 to 9, phenol can be removed with the high efficiency in the process of enhanced coagulation by manganese dioxide formed in situ. While under the strong acid condition and strong basic condition, phenol has lower removal efficiency.

The intestine of marine teleosts produces carbonate precipitates from ingested calcium as part of their osmoregulatory strategy in seawater. The potential for estrogens to control the production of intestinal calcium carbonate and so influence osmoregulation was investigated in seawater-acclimated rainbow trout following intraperitoneal implantation of 17β-estradiol (E2) at two doses (0.1 and 10 μg E2 g(-1)). Levels of plasma vitellogenin provided an indicator of estrogenic effect, increasing significantly by three and four orders of magnitude at the low and high doses, respectively. Plasma osmolality and muscle water content were unaffected, whereas E2-treated fish maintained lower plasma [Na(+)] and [Cl(-)]. Plasma [Ca(2+)] and [Mg(2+)] and muscle [Ca(2+)] increased with vitellogenin induction, whereas the intestinal excretion of calcium carbonate was reduced. This suggests that elevated levels of circulating E2 may enhance Ca(2+) uptake via the gut and simultaneously reduce CaCO(3) formation, which normally limits intestinal availability of Ca(2+). Increasing E2 caused an elevation of [Na(+)] and [Cl(-)] and a reduction of [HCO(3(-))] in intestinal fluid. We speculate that E2 may influence a number of intestinal ion transport processes that ultimately may influence water absorption: (1) reduced NaCl cotransport, (2) reduced Cl(-) uptake via Cl(-)/HCO(3(-)) exchange and (3) reduced precipitation of Ca(2+) and Mg(2+) carbonates. Despite these effects on intestinal ion and water transport, overall osmoregulatory status was not compromised in E2-treated fish, suggesting the possibility of compensation by other organs.

Densely cross-linked poly(vinylamine) microbeads (∼ 2 μm) were prepared by precipitation copolymerization of N-vinyl formamide and ethylene glycoldimethacrylate in acetonitrile. The formamido groups of the microbeads were hydrolyzed into amino groups. Then, amino-functionalized microbeads were used for covalent immobilization of laccase via glutaraldehyde coupling. The average amount of immobilized enzyme was 18.7 mg/g microbeads. Kinetic parameters, V(max) and K(m) values were determined as 20.7 U/mg protein and 2.76 × 10(-2)mmol/L for free enzyme and 15.8 U/mg protein and 4.65 mmol/L for the immobilized laccase, respectively. The immobilized laccase was operated in a batch reactor for the degradation of two different benzidine based dyes (i.e., Direct Blue 1 and Direct Red 128). The laccase immobilized on the microbeads was very effective for removal of these dyes which interfere with the hormonal system., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Functional nanofibrous materials composed of gelatin-apatite-poly(lactide-co-caprolactone) (PLCL) were produced using an electrospinning process. A gelatin-apatite precipitate, which mimicked bone extracellular matrix, was homogenized in an organic solvent using various concentrations of PLCL. A fibrous structure with approximate diameters of a few hundred nanometers was successfully generated. Apatite nanocrystallines were found to be effectively distributed within the polymeric matrix of the gelatin-PLCL. The addition of a small amount of gelatin-apatite into PLCL significantly improved the tensile strength of the nanofiber by a factor of 1.8. Moreover, tissue cell growth on the composite nanofiber was enhanced. Osteogenic differentiation of the cells was significantly stimulated by the composite nanofiber compared with the pure PLCL nanofiber. When implanted in a rat calvarium for 6weeks the composite nanofiber supported defect closure and new bone formation better than the pure PLCL nanofiber, as deduced from micro-computed tomography and histological analyses. Based on these results, the gelatin-apatite-PLCL composite nanofiber developed in this study is considered to be potentially useful as a bone tissue regeneration matrix., (Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Gentamicin (GEN) is an aminoglycoside antibiotic with a potent antibacterial activity against a wide variety of bacteria. However, its poor cellular penetration limits its use in the treatment of infections caused by intracellular pathogens. One potential strategy to overcome this problem is the use of particulate carriers that can target the intracellular sites of infection. In this study GEN was ion-paired with the anionic AOT surfactant to obtain a hydrophobic complex (GEN-AOT) that was formulated as a particulated material either by the precipitation with a compressed antisolvent (PCA) method or by encapsulation into poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles (NPs). The micronization of GEN-AOT by PCA yielded a particulated material with a higher surface area than the non-precipitated complex, while PLGA NPs within a size range of 250-330 nm and a sustained release of the drug over 70 days were obtained by preparing the NPs using the emulsion solvent evaporation method. For the first time, GEN encapsulation efficiency values of ∼100% were achieved for the different NP formulations with no signs of interaction between the drug and the polymer. Finally, in vitro studies against the intracellular bacteria Brucella melitensis, used as a model of intracellular pathogen, demonstrated that the bactericidal activity of GEN was unmodified after ion-pairing, precipitation or encapsulation into NPs. These results encourage their use for treatment for infections caused by GEN-sensitive intracellular bacteria., (Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

A whole-lake hypolimnetic Ca(OH)(2) addition, that induced calcium carbonate precipitation, combined with deep water aeration has been applied to eutrophic Lake Luzin, Germany during 1996-1998. In this study we investigated the dynamic of phosphorus and its binding forms in seston and sediment before and during the treatment. The sedimentation rates of phosphorus increased within three years of induced calcite precipitation. The phosphorus binding forms shifted to the calcite-bound phosphorus in the settling matter. The increase of calcite-bound P in the settling material did not coincide with the maximum induced CaCO(3)-precipitation caused by the hypolimnetic addition of Ca(OH)(2). An impact of chemicals additions and pH on phosphorus binding forms in seston and surface sediments has been studied in laboratory experiments with sediment core incubations and slurry experiments. Laboratory studies showed that the lowest phosphorus flux from sediment was related to the experiment with pH=7 in overlaying water adjusted with Ca(OH)(2). The adjusting of pH with Ca(OH)(2) leads to a lower P flux of 2.3 mg Pm(-2)d(-1), while the highest P-flux is attributed to the experiment with the pH which was adjusted with NaOH. Phosphorus fraction which reflects phosphorus binding on carbonates in surface sediments increased within one year of treatment, enhancing the phosphorus retention capacity of sediments., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The hypoxia inducible factor 1α (HIF-1α) is overexpressed in solid tumors, driving tumor angiogenesis and survival. However, the mechanisms regulating HIF-1α expression in solid tumors are not fully understood. In this study, we find that microtubule integrity and dynamics are intricately involved in orchestrating HIF-1α translation. HIF-1α messenger RNA (mRNA) traffics on dynamic microtubules when it is actively translated. Microtubule perturbation by taxol (TX) and other microtubule-targeting drugs stalls HIF-1α mRNA transport and releases it from polysomes, suppressing its translation. Immunoprecipitation of the P-body component Argonaute 2 (Ago2) after microtubule disruption shows significant enrichment of HIF-1α mRNAs and HIF-targeting microRNAs (miRNAs). Inhibition of HIF-repressing miRNAs or Ago2 knockdown abrogates TX's ability to suppress HIF-1α translation. Interestingly, microtubule repolymerization after nocodazole washout allows HIF-1α mRNA to reenter active translation, suggesting that microtubule dynamics exert tight yet reversible control over HIF-1α translation. Collectively, we provide evidence for a new mechanism of microtubule-dependent HIF-1α translation with important implications for cell biology.

Small interfering (si) RNAs, produced by the RNA interference (RNAi)-mediated processing of long double-stranded (ds) RNAs, can inhibit gene expression by post-transcriptional or transcriptional gene silencing mechanisms. At the heart of all small RNA-mediated silencing lies the key RNAi effector protein Argonaute, which once loaded with small RNAs can recognize its target transcript by siRNA-RNA Watson-Crick base pairing interactions. In the fission yeast Schizosaccharomyces pombe, the formation of the epigenetically heritable centromeric heterochromatin requires RNAi proteins including the sole fission yeast Argonaute homolog, Ago1. Two distinct native Ago1 complexes have been purified and studied extensively, both of which are required for siRNA production and heterochromatin formation at the fission yeast centromeres. The purification and analysis of the Argonaute siRNA chaperone (ARC) complex and RNA-induced transcriptional silencing (RITS) complex have provided insight into the mechanism of siRNA-Ago1 loading and the cis recruitment of silencing complexes at fission yeast centromeres, respectively. These discoveries have been instrumental in shaping the current models of RNA-mediated epigenetic silencing in eukaryotes. Below, we describe the protocol used for affinity purification of the native Ago1 complexes from S. pombe.

Secondary-treated municipal wastewater (MWW) is a promising alternative to freshwater as power plant cooling system makeup water, especially in arid regions. A prominent challenge for the successful use of MWW for cooling is potentially severe mineral deposition (scaling) on pipe surfaces. In this study, theoretical, laboratory, and field work was conducted to evaluate the mineral deposition potential of MWW and its deposition control strategies under conditions relevant to power plant cooling systems. Polymaleic acid (PMA) was found to effectively reduce scale formation when the makeup water was concentrated four times in a recirculating cooling system. It was the most effective deposition inhibitor of those studied when applied at 10 mg/L dosing level in a synthetic MWW. However, the deposition inhibition by PMA was compromised by free chlorine added for biogrowth control. Ammonia present in the wastewater suppressed the reaction of the free chlorine with PMA through the formation of chloramines. Monochloramine, an alternative to free chlorine, was found to be less reactive with PMA than free chlorine. In pilot tests, scaling control was more challenging due to the occurrence of biofouling even with effective control of suspended bacteria. Phosphorous-based corrosion inhibitors are not appropriate due to their significant loss through precipitation reactions with calcium. Chemical equilibrium modeling helped with interpretation of mineral precipitation behavior but must be used with caution for recirculating cooling systems, especially with use of MWW, where kinetic limitations and complex water chemistries often prevail., (Copyright © 2010 Elsevier Ltd. All rights reserved.)