Search

Abstract: This work presents a preliminary study on the ageing process of proteinaceous binder materials used in painting under UV light. With this aim, two sets of model samples were prepared: samples prepared using a single protein material and complex samples prepared in a similar way to the sequence of layers in a real painting from lowest to highest complexity (protein, drying oils, pigment and varnish). The study focuses on acquiring information about the possible degradation process of proteinaceous binders due to ageing and how this process be affected by the presence of characteristic non-proteinaceous painting materials, such as lipids from linseed oil, terpenic compounds from varnish and inorganic pigments. Samples simulated the accelerated ageing process, as did the UV light exposition. The FT-IR spectra were recorded after 100, 500, 1000 and 1500h of exposition. The study of the accelerated ageing process was performed by means of principal component analysis (PCA) using the FT-IR spectra obtained. Loadings from the significant principal components were analysed to find the FT-IR frequency (cm−1) involved in the degradation process. The study showed the lack of any relevant modification on the proteins in the single model samples. On the contrary, the complex model samples showed the ageing process. The accelerated ageing process can be explained by a principal component from PCA. The most affected IR region was 2900–3600cm−1, where the amide band was included. [Copyright &y& Elsevier]

A revisitation of the well known chromatographic procedure for the determination of amino acids as phenylthiocarbamyl derivatives (PTC) is performed. The method was developed for a microbore column that it is more appropriate to our later aims, the characterization of proteinaceous binders present in microsamples coming from the Cultural Heritage field. Several variables relating to chromatographic aspects were studied such as the pH and temperature of the mobile phase, buffer and modifier (triethylamine) concentrations in mobile phase and the stability of PTC-derivatives in solution. The calibration function was studied in depth. To prevent the heteroscedastic behaviour that it is observed, we used the weighed least squares fitting as the best strategy among other normalizing transformations, such as square root and logarithmic functions. Finally, the proposed method showed results similar to the traditional method in terms of efficiency, runtime, LODs and other characteristics, but with two additional advantages: a lower mobile phase consumption and the possibility of working with a lower sample volume. The usefulness of proposed method is checked against easel painting samples of Pictorial Heritage.

Two rapid and simple methods were developed for the determination of natamycin in lactoserum matrix by ultraviolet (UV) spectrophotometry and liquid chromatography (LC) with diode-array detection. The methods involve protein precipitation with methanol, followed by centrifugation. No cleanup is necessary. The applicable concentrations of natamycin in lactoserum range from 2 to 500 mg/L for samples analyzed by both methods. The detection and quantitation limits are 0.07 and 0.23 mg/L, respectively, for the UV spectrophotometric method and 0.1 and 0.32 mg/L, respectively, for the LC method. The methods were applied satisfactorily to the determination of natamycin in various commercial lactosera. Both methods were validated independently by standard additions and Youden methodologies, which verified their accuracy. Once the 2 proposed methods were validated independently, the validation of one method was carried out with the other.