Search

A recent experimental campaign performed at the LOHENGRIN spectrometer at ILL aimed at measuring the independent fission yield of 136Cs in the 239Pu(nth,f) reaction. This nuclide can have an important contribution to the total dose rate coming from spent light water reactor UOX and MOX fuels. Moreover, its impact is of first order on the uncertainty of the total dose rate calculated in specific areas of Nuclear Power Plants within accidental conditions. One of the most important sources of uncertainty is its independent fission yield. Therefore, a new measurement of its independent yield along with a rigorous uncertainty analysis was performed. Due to its low independent yield, a new measurement technique has been applied. Ions recoiling from neutron-irradiated 239Pu target were collected by implantation into an Al foil placed inside a vacuum chamber. This foil was then transferred to a low γ-ray background setup located at nearby laboratory (LPSC). The procedure was then repeated for different LOHENGRIN settings. Compared to the JEFF-3.1.1 library, a decrease of the fission yield of 136Cs with a reduced uncertainty is obtained.

Two blind analyses for 241Pu(nth,f) isobaric fission yields have been conducted, one analysis using a mix of a Monte-Carlo and an analytical method, the other one relying only on analytical calculations. The calculations have been derived from the same analysis path and experimental data, obtained on the LOHENGRIN mass spectrometer at the Institut Laue-Langevin. The comparison between the two analyses put into lights several biases and limits of each analysis and gives a comprehensive vision on the construction of the correlation matrix. It gives confidence in the analysis scheme used for the determination of the fission yields and their correlation matrix.

The simulation of the de-excitation of nuclei requires some models and data in order to construct the nuclear level scheme and the associated transition intensities. The aim of this work is to focus on nuclear structure data used at low energy where electromagnetic transitions can be measured. The RIPL3 database linked to the FIFRELIN Monte Carlo code contains such data and their influence on fission observables is reviewed.

Studies on fission yields have a major impact on the characterization and the understanding of the fission process and are mandatory for reactor applications. Fission yield evaluation represents the synthesis of experimental and theoretical knowledge to perform the best estimation of mass, isotopic and isomeric yields. Today, the output of fission yield evaluation is available as a function of isotopic yields. Without the explicitness of evaluation covariance data, mass yield uncertainties are greater than those of isotopic yields. This is in contradiction with experimental knowledge where the abundance of mass yield measurements is dominant. These last years, different covariance matrices have been suggested but the experimental part of those are neglected. The collaboration between the LPSC Grenoble and the CEA Cadarache starts a new program in the field of the evaluation of fission products in addition to the current experimental program at Institut Laue-Langevin. The goal is to define a new methodology of evaluation based on statistical tests to define the different experimental sets in agreement, giving different solutions for different analysis choices. This study deals with the thermal neutron induced fission of 235U. The mix of data is non-unique and this topic will be discussed using the Shannon entropy criterion in the framework of the statistical methodology proposed.

Fission observables in the case of 252Cf(sf) are investigated by exploring several models involved in the excitation energy sharing and spin-parity assignment between primary fission fragments. In a first step the parameters used in the FIFRELIN Monte Carlo code “reference route" are presented: two parameters for the mass dependent temperature ratio law and two constant spin cut-off parameters for light and heavy fragment groups respectively. These parameters determine the initial fragment entry zone in excitation energy and spin-parity (E*, Jπ). They are chosen to reproduce the light and heavy average prompt neutron multiplicities. When these target observables are achieved all other fission observables can be predicted. We show here the influence of input parameters on the saw-tooth curve and we discuss the influence of a mass and energy-dependent spin cut-off model on gamma-rays related fission observables. The part of the model involving level densities, neutron transmission coefficients or photon strength functions remains unchanged.

Evaluated nuclear data are essential for nuclear reactor studies. In order to significantly improve the precision of nuclear data, more and more fundamental fission models are used in the evaluation processing. Therefore, tests of fission models become a central issue. In this framework, FIFRELIN (FIssion Fragments Evaporation Leading to an Investigation of Nuclear data) is a Monte Carlo code developed in order to modelize fission fragments de-excitation through the emission of neutrons, γ and conversion e-. To be performed, a FIFRELIN calculation relies on several models such as gamma strength function and nuclear level density and of more empirical hypothesis such as total excitation energy repartition or angular momentum given by the fission reaction. Moreover, pre-emission mass yield and kinetic energy distribution per mass are necessary to process the simulation. A set of five free parameters are chosen to reproduce a target observable. Often this observable corresponds to the mean neutron multiplicity for heavy and light fragment. In this work, the impact of the set of parameters on different output observables (neutron emission probability, neutron multiplicity as function of the fission fragment mass) is investigated.

FIPPS is the new nuclear physics instrument of ILL for the spectroscopy of nuclei produced in neutron-induced reactions. The performance of the first implementation of the setup will be shown, together with an overview of the first experimental campaign (December 2016-March 2017). Future perspectives and physics opportunities will then be discussed.

Nuclear fission yields data measurements for thermal neutron induced fission of 241Pu have been carried out at the Institut Laue Langevin (ILL) in Grenoble, using the Lohengrin mass spectrometer. Mass, isotopic and isomeric yields have been extracted for the last measurements. A focus is given in this document to the mass yield results which are obtained for almost the entire heavy peak and most of the light high yields masses, along with the covariance matrix. The mean kinetic energy as a function of the fission product mass has also been extracted from the measurements. The total mean kinetic energy pre and post neutron emission have been assessed and compared to other works showing a rather good agreement.

Fission yields are essential for nuclear reactor studies (decay heat, fuel inventory…) and constitute also one of the main observables needed to improve our understanding of the fission process. The symmetric mass region is of particular interest due to various intriguing properties of the fission fragments already reported in the literature : inversion of the nuclear charge polarization, large width of the fission fragment kinetic energy distribution, strong change of the prompt neutron multiplicity, etc. Recently, measurements of fission yields and kinetic energy distributions in the symmetric mass region were achieved at the LOHENGRIN mass spectrometer of the Institut Laue-Langevin (ILL). This experimental work is challenging due to the low counting rate and the appearance of contaminant masses, leading to pronounced components in the fission fragment kinetic energy distribution. Despite removing the undesirable contributions, the fission fragment kinetic energy distributions still show two components, indicating that the fission process could be modal. To go further and better characterize these components a comparison between our experimental data and Monte Carlo calculations (FIFRELIN code) simulating the de-excitation of the fission fragments for different fission channels will be presented and discussed.

The de-excitation process of primary fission fragments can be simulated with the FIFRELIN Monte Carlo code leading to an estimation of prompt fission observables such as neutron/gamma multiplicities and spectra in correlation with fission fragments. De-excitation cascades are simulated using the notion of nuclear realization following Becvar terminology generalized to neutron/gamma coupled emission. A nuclear realization is a random set of nuclear levels (energy, spin, parity) in association with partial widths for neutron, gamma or electron emission. Experimental data related to electromagnetic transitions in the discrete level region are taken from RIPL-3 database. When nuclear level structure is completely unknown (in the continuum region), level density and strength function models are used. In between these regions, our partial knowledge of nuclear structure is completed by models up to a fixed maximum level density. In this way the whole available experimental information is accounted for. FIFRELIN is ruled by five free input parameters driving the excitation energy sharing, the rotational energy and the spin distribution of primary fission fragments. These five free parameters are determined to match a target observable such as the average total prompt neutron multiplicity (ν). Once this procedure is completed, the whole set of fission observables can be compared with experimental results. Obviously the number of observables obtained within this code is higher than what is available from measurements. This code can therefore provide useful insights into the compatibility between models and a whole set of fission observables. In the present work the influence of shell corrections is reported on level densities and prompt fission neutron spectra (PFNS). The impact of the input data such as primary fission fragment total kinetic energy (TKE) is also addressed. Average prompt neutron multiplicity as a function of TKE is also estimated for each mass split and compared to recent measurements. The presence of structures in the calculations (especially for light nuclei) is clearly related to the nuclear level scheme. Various situations occur and an overestimation (or underestimation) of the calculated number of emitted neutrons can be correlated to the light or heavy fragment of a pair and to a restricted energy range. In addition prompt fission gamma spectra (PFGS) are estimated for selected fragment mass ranges and compared to recent measurements. In this way the presence of specific gamma-ray transitions can be established.

The calculation of the Prompt Fission Neutron Spectrum (PFNS) was performed using the FIFRELIN Monte Carlo code simulating the de-excitation of the whole fission fragments. This de-excitation is governed by the Hauser-Feshbach statistical model, which has the advantage to take into account the conservation laws for the energy, spin and parity of the initial and final states. In this way, the competition between prompt neutron and prompt gamma emission can be properly accounted for. Assuming that the prompt neutron emission comes only from an evaporation process of the fully accelerated fission fragments, our calculations are not able to reproduce satisfactorily the experimental data. In this context, we have added an additional source of neutrons that may arise during the sudden rupture of the neck (the so-called scission neutrons). Applied in the case of the spontaneous fission of 252Cf, our PFNS calculations show a very good agreement with the Mannhart evaluation by accounting for a 2% scission neutron contribution.

The simulation of the de-excitation of nuclei requires some models and data in order to construct the nuclear level scheme and the associated transition intensities. The aim of this work is to focus on nuclear structure data used at low energy where electromagnetic transitions can be measured. The RIPL3 database linked to the FIFRELIN Monte Carlo code contains such data and their influence on fission observables is reviewed. [ABSTRACT FROM AUTHOR]

Two blind analyses for 241Pu(nth,f) isobaric fission yields have been conducted, one analysis using a mix of a Monte-Carlo and an analytical method, the other one relying only on analytical calculations. The calculations have been derived from the same analysis path and experimental data, obtained on the LOHENGRIN mass spectrometer at the Institut Laue-Langevin. The comparison between the two analyses put into lights several biases and limits of each analysis and gives a comprehensive vision on the construction of the correlation matrix. It gives confidence in the analysis scheme used for the determination of the fission yields and their correlation matrix. [ABSTRACT FROM AUTHOR]

Studies on fission yields have a major impact on the characterization and the understanding of the fission process and are mandatory for reactor applications. Fission yield evaluation represents the synthesis of experimental and theoretical knowledge to perform the best estimation of mass, isotopic and isomeric yields. Today, the output of fission yield evaluation is available as a function of isotopic yields. Without the explicitness of evaluation covariance data, mass yield uncertainties are greater than those of isotopic yields. This is in contradiction with experimental knowledge where the abundance of mass yield measurements is dominant. These last years, different covariance matrices have been suggested but the experimental part of those are neglected. The collaboration between the LPSC Grenoble and the CEA Cadarache starts a new program in the field of the evaluation of fission products in addition to the current experimental program at Institut Laue-Langevin. The goal is to define a new methodology of evaluation based on statistical tests to define the different experimental sets in agreement, giving different solutions for different analysis choices. This study deals with the thermal neutron induced fission of 235U. The mix of data is non-unique and this topic will be discussed using the Shannon entropy criterion in the framework of the statistical methodology proposed. [ABSTRACT FROM AUTHOR]

The study of fission yields has a major impact on the characterization and understanding of the fission process and is mandatory for reactor applications. The mass and isotopic yields of the fission fragments have a direct influence on the predictions of fuel burn-up and decay heat. Moreover, these data are requested for other studies as delayed neutron evaluation, antineutrino flux assessment or reactor program. Today, the lack of covariance matrix associated to evaluated fission yields induces overestimated uncertainties of mass yields since these observables result from the sum of isotopic and isomeric yields. Our collaboration starts a new program in the field of the evaluation of fission products in addition to the current experimental program. The goal is to define a new methodology of evaluation based on statistical tests in order to provide the best estimation with consistent sets of measurements. A ranking of solutions with associated covariance based on Shannon’s entropy criterion is proposed for the mass yields from 235 U(nth, f) reaction.