Search

Semiconductor-superconductor hybrid materials are used as a platform to realise Andreev bound states, which hold great promise for quantum applications. These states require transparent interfaces between the semiconductor and superconductor, which are typically realised by in-situ deposition of an Al superconducting layer. Here we present a hybrid material based on an InAs two-dimensional electron gas (2DEG) combined with in-situ deposited Nb and NbTi superconductors, which offer a larger operating range in temperature and magnetic field due to their larger superconducting gap. We overcome the inherent difficulty associated with the formation of an amorphous interface between III-V semiconductors and Nb-based superconductors by introducing a 7 nm Al interlayer. The Al interlayer provides an epitaxial connection between an in-situ magnetron sputtered Nb or NbTi thin film and a shallow InAs 2DEG. This metal-to-metal epitaxy is achieved by optimization of the material stack and results in an induced superconducting gap of approximately 1 meV, determined from transport measurements of superconductor-semiconductor Josephson junctions. This induced gap is approximately five times larger than the values reported for Al-based hybrid materials and indicates the formation of highly-transparent interfaces that are required in high-quality hybrid material platforms.

We present Nb thin films deposited in-situ on GaAs by combining molecular beam epitaxy and magnetron sputtering within an ultra-high vacuum cluster. Nb films deposited at varying power, and a reference film from a commercial system, are compared. The results show clear variation between the in-situ and ex-situ deposition which we relate to differences in magnetron sputtering conditions and chamber geometry. The Nb films have critical temperatures of around $9 \textrm{K}$. and critical perpendicular magnetic fields of up to $B_{c2} = 1.4 \textrm{T}$ at $4.2 \textrm{K}$. From STEM images of the GaAs-Nb interface we find the formation of an amorphous interlayer between the GaAs and the Nb for both the ex-situ and in-situ deposited material., Comment: 12 pages paper, 9 pages supplementary, 6 figures paper, 7 figures supplementary

Quantum transport measurements are performed in gate-defined, high-quality, two-dimensional hole and electron systems in an undoped InSb quantum well. For both polarities, the carrier systems show tunable spin-orbit interaction as extracted from weak anti-localization measurements. The effective mass of InSb holes strongly increases with carrier density as determined from the temperature dependence of Shubnikov-de Haas oscillations. Coincidence measurements in a tilted magnetic field are performed to estimate the spin susceptibility of the InSb two-dimensional hole system. The g-factor of the two-dimensional hole system decreases rapidly with increasing carrier density., Comment: 10 pages, 7 figures

We report on transport experiments through high-mobility gate-tunable undoped InSb QWs. Due to the elimination of any Si modulation doping, the gate-defined two-dimensional electron gases in the quantum wells display a significantly increased mobility of 260,000 cm$^2$/Vs at a rather low density of $2.4\times10^{11}$ cm$^{-2}$. Using magneto-transport experiments, we characterize spin-orbit interactions by measuring weak antilocalization. Furthermore, by measuring Shubnikov-de Haas oscillations in tilted magnetic fields, we find that the g-factor agrees with $k \cdot p$ theory calculations at low magnetic fields but grows with spin polarization and carrier density at high magnetic fields. Additionally, signatures of Ising quantum Hall ferromagnetism are found at filling factor $\nu$ = 2 for tilt angles where the Landau level energy equals the Zeeman energy. Despite the high mobility, the undoped InSb quantum wells exhibit no fractional quantum Hall effect up to magnetic fields of 25 T., Comment: 37 pages, 8 figures

We investigate an electrostatically defined quantum point contact in a high-mobility InSb two-dimensional electron gas. Well-defined conductance plateaus are observed, and the subband structure of the quantum point contact is extracted from finite-bias measurements. The Zeeman splitting is measured in both in-plane and out-of-plane magnetic fields. We find an in-plane g factor $|g_{\parallel}^* | \approx$ 40. The out-of-plane g factor is measured to be $|g_{\perp}^* | \approx$ 50, which is close to the g factor in the bulk., Comment: 20 pages, 5 figures

High mobility InSb quantum wells with tunable carrier densities are investigated by transport experiments in magnetic fields tilted with respect to the sample normal. We employ the coincidence method and the temperature dependence of the Shubnikov-de Haas oscillations and find a value for the effective g-factor of $\mid g^{\ast}\mid $ =35$\pm$4 and a value for the effective mass of $m^*\approx0.017 m_0$, where $m_0$ is the electron mass in vacuum. Our measurements are performed in a magnetic field and a density range where the enhancement mechanism of the effective g-factor can be neglected. Accordingly, the obtained effective g-factor and the effective mass can be quantitatively explained in a single particle picture. Additionally, we explore the magneto-transport up to magnetic fields of 35 T and do not find features related to the fractional quantum Hall effect., Comment: 18 Pages, 5 Figures

InSb is one of the promising candidates to realize a topological state through proximity induced superconductivity in a material with strong spin-orbit interactions. In two-dimensional systems, thin barriers are needed to allow strong coupling between superconductors and semiconductors. However, it is still challenging to obtain a high-quality InSb two-dimensional electron gas in quantum wells close to the surface. Here we report on a molecular beam epitaxy grown heterostructure of InSb quantum wells with substrate-side Si-doping and ultra-thin InAlSb (5 nm, 25 nm, and 50 nm) barriers to the surface. We demonstrate that the carrier densities in these quantum wells are gate-tunable and electron mobilities up to 350,000 $\rm{cm^2(Vs)^{-1}}$ are extracted from magneto-transport measurements. Furthermore, from temperature-dependent magneto-resistance measurements, we extract an effective mass of 0.02 $m_0$ and find a Zeeman splitting compatible with the expected g-factor., Comment: Zijin Lei and Christian A. Lehner contributed equally to this work. For Supplementary Materials, please download the source files