Search

One of the most crucial considerations for practical applications of organic photovoltaics (OPV) is the stability under sunlight irradiation. It is necessary to translate the small device stability to the module level. Herein, the photostability of the OPV module with three cells connected in series with a total effective area of 10.8 cm2 is presented. The stability of the OPV module is studied under continuous irradiation by a UV light‐emitting diode (LED) with integrated UV intensity the same as AM1.5 solar irradiations. As a result, the OPV module achieves good stability under UV light with a half‐lifetime of about 1300 h without a UV filter. The lifetime is similar to the small device with the same materials. The series resistance and the encapsulation must be optimized simultaneously. The suitable metal of the external electrode greatly improves the OPV module's performance. In addition, the UV stability of the normal structure is shown to be better than the inverted structure because of the photoinstability of the ZnO layer. Moreover, the UV stability of semitransparent OPV modules is shown to be‐ similar to the opaque ones. [ABSTRACT FROM AUTHOR]

The thyroid biokinetic model of radioactive I-131 was re-evaluated using a refined nine-compartmental model and applied to twelve thyroid cancer patients. In contrast to the simplified four-compartmental model regulated by the ICRP-56 report, the revised model included nine compartments specified in the ICRP-128 report, namely, oral, stomach, body fluid, thyroid, whole body, liver, kidney, bladder, and remainder (i.e., the whole body minus kidney and bladder). A self-developed program run in MATLAB was designed to solve the nine first-order simultaneous linear differential equations. The model was realized in standard and simplified versions. The latter neglected two feedback paths (body fluid to oral, i31, and kidney to the whole body, i87) to reduce computations. Accordingly, the biological half-lives for the major compartments (thyroid and body fluid + whole body) were 36.00 ± 15.01, 15.04 ± 5.63, 34.33 ± 15.42, and 14.83 ± 5.91 of standard and simplified version. The correlations between theoretical and empirical data for each patient were quantified by the dimensionless AT (agreement) index and, the ATtot index integrated each individual AT of a specific organ of one patient. Since small AT values indicated a closer correlation, the obtained range of ATtot (0.048 ± 0.019) proved the standard model’s reliability and high accuracy, while the simplified one yielded slightly higher ATtot (0.058 ± 0.023). The detailed outcomes among various compartments of twelve patients were calculated and compared with other researchers’ work. The correlation results on radioactive I-131 evolution in thyroid cancer patients’ bodies are instrumental in viewpoint of radioactive protection of patients and radiological personnel.

Circularly polarized luminescence (CPL) materials are promising candidates for future display technology. However, such highly efficient emitters suffer from the issues of difficult chiral separation and low photoluminescence quantum yield (PLQY). In this work, the chiral 4,4′‐biphenanthrene‐3,3′‐diol (BIPOL) unit was introduced into a thermally activated delayed fluorescence (TADF) framework for the first time. We presented two series of enantiomers, R/S‐o‐DCzBPNCN and R/S‐p‐DCzBPNCN, and the synthesis of enantiopure BIPOL can be prepared via normal column chromatography. Notably, o‐DCzBPNCN showed narrow singlet‐triplet gap of 0.05 eV, efficient TADF, and high PLQYs of 82 % in doped films. In addition, R/S‐o‐DCzBPNCN exhibited high luminescence dissymmetry factor (gPL) values of −1.94×10−2/+1.91×10−2 in doped films. The strategy of BIPOL introduction offers a new approach to organic emitters with stereospecific synthesis, TADF, and chiroptical properties. [ABSTRACT FROM AUTHOR]

CsPbBr3 quantum dots with various diameters around the Bohr exciton radius and emission wavelengths between 460 nm to 520 nm were prepared. Quantum dots with diameters of 4–13 nm were characterized via their absorption spectra, photoluminescence spectra, X-ray diffraction patterns, and time-resolved photoluminescence. Binary mixture solutions and composite films composed of blue and green CsPbBr3 quantum dots showed two emission peaks without anion-exchange issues. A solution of red CdSe quantum dots was added to the sky-blue binary mixture solution to form a ternary mixture solution with white emission. Three clear emission peaks were observed, and the CIE chromaticity coordinates (0.33, 0.31) were obtained. A QD–polymer composite film with white emission was prepared and stacked on a UV LED to demonstrate white LEDs. Besides, white LEDs with a single emissive layer were prepared from the ternary mixture solution. Three emission peaks and CIE coordinates of (0.34, 0.33) were obtained. [ABSTRACT FROM AUTHOR]