Search

Transmission line silicon rubber insulators are frequently subjected to harsh environmental conditions that can change their surface characteristics and result in a transient or permanent loss of hydrophobicity. Algae, fungi, mould, and lichen are examples of biological growth that can compromise the power system’s ability to operate safely by lowering the insulator’s flashover voltage. We evaluated and identified the major microorganisms that could be responsible for the flashovers of insulators in South Africa. Due to the difficulty of accessing insulators currently in use within the electricity network, only two insulators, from two provinces in South Africa, were used in the study. Although algae were not found on the insulators, two major filamentous fungi identified as Curvularia sp. and Aspergillus sp. were isolated. The absence of algae could be attributed to the weather pattern of the two locations where the insulators were placed during their use as part of the network. According to previous studies worldwide, the high occurrence of these fungi could be linked to the reduction of flashover voltage of the composite insulators. Although a larger survey including more insulators from all provinces in South Africa should be conducted, the current study demonstrates the need for a cleaning programme for insulators using cost-effective eco-friendly antimicrobial agents. Significance: • Degradation and loss of hydrophobicity on the overhead line composite due to biological growth were found to be an impediment to the safe operation of high-voltage insulators. Fungi were found to be the main factor causing the degradation of overhead transmission lines. • With these data, a model can be developed to predict the rate of biological growth on a given insulator, to estimate the degradation of the surface conditions with time for the utility to know when to remove them from the line. Such a model could lead to a more reliable and efficient power system and reduce the engineer’s workload.

Nepal has a very large topographical variation; this elevation change has a major influence on lightning occurrence and human casualties. The Himalayan peaks cover the northern part of Nepal with low population density, the middle is covered by hills with intermediate density, and the southern plain with the greatest density. This study will leverage lightning detection by Vaisala’s Global Lightning Dataset GLD360 network with a recent detailed compilation of lightning casualties from 2011 through 2020. Over one million lightning strokes per year were detected from 2016 through 2020. Stroke density is least over high elevations to the north, moderate in hilly regions, and very frequent over the south. The thunderstorm season begins in March and ceases by August after the annual monsoon cycle. Of all the natural disasters, lightning has been recorded to be the second highest killer after earthquakes. The Ministry of Home Affairs reports an average of 103 lightning deaths per year. The fatality rate of 3.8 deaths million−1 year−1 is highest among the South Asian countries. Fatalities over high mountains are rare, with most casualties over the center of Nepal. Lightning Fatality Risk is not a good indicator of the fatalities that occur in a district.

The hydrophilic nature of cellulose compromises the dielectric properties of kraft paper insulation when exposed to water and moisture. The effort to address this setback is an ongoing research enquiry. In the present work, surface-modified rutile-titanium dioxide nanoparticles (rutile-TiO2 NPs) are reinforced into cellulose pulp to fabricate a nanocomposite kraft paper insulation. Surface modification of the nanofiller particles is intended to reduce the hydrophilicity of the resultant nanocomposite kraft paper insulation. The nanoparticles (rutile-TiO2 NPs) improve other dielectric properties of the insulation. The chemicals used for the surface modification of the rutile-TiO2 NPs were the alkyl ketene dimer (AKD) and alkenyl succinic anhydride (ASA). The nanofiller retention, dispersion and hydrophobic properties of the resultant reinforced kraft paper were experimentally analyzed. The results show that more than 50% of the nanofillers were retained within the reinforced kraft paper and translated to 1.5% by weight loading of the nanoparticles in the kraft paper. Scanning electron microscopy (SEM) images showed evenly distributed nanofillers, with some traces of agglomeration. The moisture absorption property of the kraft paper specimen modified with rutile-TiO2 NPs surface conditioned with 5 vol/vol% ASA improved by 74% compared to the control (reference) specimen. Water vapor transmission rate of the surface-modified nanoparticles reinforced kraft paper insulation decreased by 30%. Compared to the unfilled paper, the contact angle of water droplets on the surface of the reinforced kraft paper improved by 12%. Water absorption rate improved by being 4 times slower in paper specimens containing rutile-TiO2 NPs surface conditioned with 5 vol/vol% ASA. Dielectric dissipation factor measurement results showed that the specimen modified with rutile-TiO2 NPs surface conditioned with 5 vol/vol% ASA had 40% lower dielectric losses than the reference samples. This study, therefore, has successfully improved the hydrophobic properties of kraft paper by filling it with surface-modified rutile TiO2 using 5% ASA as the nanoparticle surfactant.

Four levels of lightning-safe structures are defined based on the protection expected from various lightning injury mechanisms under thunderstorm conditions. This work, therefore, provides clarification for the long-standing issue of determining the most suitable recommendation for lightning safety in various socio-economic layers of society, especially in underprivileged communities. These globally uniform and consistent guidelines will help standard development committees, lightning safety seekers and donors of protection systems, state policy developers on disaster management, the insurance sector and industries that provide lightning protection, in determining the most appropriate lightning safety measures for a given target, based on the safety requirements, societal behaviour and affordability. Significance: • Lightning safety module developers could confidently adopt the definition of safe structures provided here in their guidelines. • The ambiguity on both indigenous and commercial lightning safe structures (purpose made) is cleared. • Standards could specify the essential features of a structure that can be considered lightning safe.

Installing surge protection devices in a hybrid photovoltaic (PV)–wind system is essential to guarantee the survival of the system’s components. If the surge arresters are connected without taking into account the recommendations given by standards, the equipment to be protected might be damaged despite the energy coordination of the arresters. In this study, nonlinear surge protective devices (SPDs) are designed for a multi-MW hybrid system based on lightning protection standards with optimised threat level ratings to investigate the mitigation of lightning transients to an acceptable level. The system is implemented using Power System Computer-Aided Design for Electromagnetic Transients including Direct Current (PSCAD/EMTDC) software. It comprises a 2 MW PV farm, a 2 MW wind farm, and a backup energy storage system (ESS), which are all connected to a 132 kV grid via a step-up transformer and a transmission line. The results were obtained at critical system nodes for two standard lightning current surges, i.e., 1/10 µs and 10/350 µs, considering two lightning strike point scenarios with and without a lightning protection system (LPS). The simulation results showed that the connected SPDs could successfully limit the transient overvoltage in the system to an acceptable level. The analysis in this work is crucial for designing, operating, and maintaining a hybrid PV–wind system. It can help to find the potential vulnerability areas within such a system and implement appropriate protection measures since there is no available lightning standard for such systems. Additionally, it assists the system operators in increasing the uptime and dependability of their RE systems, limiting expensive downtime and environmental effects while optimising energy output. Based on the results obtained, recommendations were made for lightning protection developers.

This study has been carried out to test two hypotheses; whether a small metal object such as mobile phones in possession of a human body increases the chances of a direct lightning strike and whether a similar object increases the chances of a side flash. Simulations were done in COMSOL Multiphysics for a metal sphere of radius 10 mm placed at the head level of a 2 m tall human being. A five-meter-tall cylindrical lightning target of resistivity 2.75 GΩ m and 10 nΩ m were considered. The influence of the side flash increases with the size of the metal object and also as its shape deviates from the spherical dimension. The outcomes of the study confidently discard the possibility of a metal object of practically viable size on a human body to influence the direct lightning attachment process. A metal sphere of radius about 22 m or a person of height 8.5 m is required for increasing the possibility of such a direct strike. Thus, the popular public concept is firmly rejected. However, the same metal object may significantly increase the side flash probability if the victim is close to the lightning struck object or inside an unsafe shelter.

Background COVID-19 has drastically dampened human activities since early 2020. Studies have shown that this has resulted in changes in air temperature and humidity. Since lightning activities are dependent on air temperature and humidity, this study is conducted to evaluate the correlation between the intensity of lightning activities with the atmospheric changes, and investigates the changes, in lightning activities due to atmospheric changes during the COVID-19 pandemic. Methods The hypothesis was tested through a t-test and Pearson’s correlation study. The variation trend of lightning strikes count (LSC) in Europe and Oceania during the five months COVID-19 lockdown period (March – July) compared to the same period in the previous five years from 2015 to 2019 is investigated. Results Statistical analysis shows the LSC in Europe and Oceania during the lockdown period dropped significantly by more than 50% and 44% respectively compared to the same period in previous five years. Furthermore, LSC was found to be positively correlated with air temperature and relative humidity in Europe. However, in Oceania, LSC seems to be only positively correlated with air temperature but negatively correlated with relative humidity. Conclusions This study seems to suggest that lightning activities have significantly changed during this pandemic due to reduction in human activities.

Introduction: Malaysia is one of the countries with the highest lightning flash density globally. While sufficiency of lightning protection system is crucial to ensure human safety against lightning strikes, the public awareness towards lightning safety is also equally important in Malaysia. Hence, this study was conducted to understand the current lightning safety awareness level of the Malaysian population. Methods: An online questionnaire survey which consists of 22 scientific statements of lightning was first developed in Malay and English. The questionnaire allows the respondent to also check their own score upon completion of the questionnaire. It was then distributed to the public for data collection. The sample size comprised of both genders, all layers of society from various educational level and social background. Results: Overall, the awareness on lightning safety amongst Malaysian is at moderate level with an average score of slightly above 50%. Urbanites scored marginally better than their rural counterparts. One’s education level does not dictate their awareness level of lightning safety. Discussion: In conclusion, the public in Malaysia needs to be better educated on lightning safety. Similar studies should be replicated in other countries experiencing similar levels of lightning activity to better understand the public’s perception on lightning.

A physico-chemical model of zinc recovery, in the melt ideal mixing regime, has been developed. From the cold model experiments, the melt complete mixing time criterial equation is derived. Based on it, the parameters of pilot plant were calculated and consequently the experiments for validation were conducted. The value of specific volumetric productivity, which is the key factor for calculation of the industrial sample of the reactor has been determined. By the method of affine modeling, test results of the pilot plant on its industrial design were recalculated. The calculation results demonstrate that by the increase of reactor slag productivity from 0.693 t/h up to 30 t/h, the share of the effectively used heat will increase, the heat share of the cooling water will be decreased and the fuel consumption will be reduced approximately by 2.5, 2.7 and 3 times respectively. Furthermore, by processing of solid slag, the fuel consumption would be reduced by 1.5 times compared to the one in the fuming furnace processing melted slag. It would also be 3–4 times lower than waelz-kiln treating the granulated slag. Due to low level of the molten bath in the reactor where the height is about 0.2 m, the power consumption of the air blower would be approximately 2 times less than that in fuming furnace of height about 0.7 m.

In the last few decades, finding alternatives to fossil fuels has become a hot issue across all international frontiers. The Intergovernmental Panel on Climate Change (IPCC) has shed light on the feasibility of using biofuels to meet the growing energy demand as well as to reduce CO2 emissions which are a major cause of global warming, especially in the transportation sector. The production and use of biofuels in developing countries have further advantages, including social and economic benefits. On the other hand, the biofuel industry in some developing countries is facing critical challenges related to food security, land availability, production cost, etc. In this regard, several studies have recently been conducted to address these issues, and this paper comprehensively reviews these cases with respect to the successes, failures, and challenges faced by developing countries, such as Brazil, Africa and India, in expanding their biofuel production. It is clear that all the efforts devoted to promoting the biofuel sector are still insufficient to come over the challenges associated with biofuel production despite the achievements realized in some experiences as Brazil. However, the Brazilian experience cannot be spread over other countries. Implementation of policies with regard to the specifications of each country that integrate with the other sector without intersection is highly recommended. Moreover, further efforts are needed from scientists to reduce biofuel production costs, which may promote the biofuel market as an alternative to fossil fuel.

A new system of processing galena concentrates has been developed using the non-blast method of lead reduction from its sulphides by metallic iron. Excavated slag was used as flux agents to generate the stackable sulfur-containing products, instead of sulfuric acid. Based on this relatively modern technical concept of extreme energy saving, the new system of concentrate processing has been developed. The system includes an iron reduction and zinc sublimation system from excavated slag by soot-hydrogenic mixture, products of pyrolysis of natural gases, lead ousting in crude metal from its sulphides by metallic iron in the autogenous conditions of the rotary mixer, regenerative utilization of thermic wastes of the system, and neutralization of SO2 gases by reagents obtained aboard (ZnO, Fe). The new system will reduce the effective specific equivalent fuel consumption by a factor of 3.77, and it will also expand the utilization factor of material waste products by a factor of 2.5-3 in comparison with the traditional methods of concentrate processing.

The focal and non-focal epilepsy is seen to be a chronic neurological brain disorder, which has affected $\approx ~60$ million people in the world. Hence, an early detection of the focal epileptic seizures can be carried out using the EEG signals, which act as a helpful tool for early diagnosis of epilepsy. Several EEG-based approaches have been proposed and developed to understand the underlying characteristics of the epileptic seizures. Despite the fact that the early results were positive, the proposed techniques cannot generate reproducible results and lack a statistical validation, which has led to doubts regarding the presence of the pre-ictal state. Various methodical and algorithmic studies have indicated that the transition to an ictal state is not a random process, and the build-up can lead to epileptic seizures. This study reviews many recently-proposed algorithms for detecting the focal epileptic seizures. Generally, the techniques developed for detecting the epileptic seizures were based on tensors, entropy, empirical mode decomposition, wavelet transform and dynamic analysis. The existing algorithms were compared and the need for implementing a practical and reliable new algorithm is highlighted. The research regarding the epileptic seizure detection research is more focused on the development of precise and non-invasive techniques for rapid and reliable diagnosis. Finally, the researchers noted that all the methods that were developed for epileptic seizure detection lacks standardization, which hinders the homogeneous comparison of the detector performance.

Thermal stress and moisture absorption can cause a synergetic negative impact on kraft paper. Among various approaches for improving the dielectric properties of kraft paper, nanotechnology has had promising results. However, the hydrophilicity of most metal oxide nanoparticles renders nanomodified kraft paper more vulnerable to thermal stress and moisture, thereby inducing degradation. In nanomodified kraft paper research, the use of TiO2 nanoparticles has yielded the most promising results. The major shortfall, however, is the hydrophilicity of TiO2. This work investigated surface modifications of rutile-TiO2 nanoparticles (NPs) for improved hydrophobicity and thermal stability. Rutile-TiO2 NPs is a nontoxic metal oxide that can withstand high temperature and is stable in chemical reactions. Two cases of surfactants were used—alkyl ketene dimer (AKD) and alkenyl succinic anhydride (ASA). The intention was to increase heat resistance and reduce the surface free energy of the rutile-TiO2 NPs. The impacts of the surface modifiers on the rutile-TiO2 NPs were characterised using FT-IR, muffle furnace, analytical weight balance, and TGA. It was discovered that new functional groups were formed on the modified NPs examined through FT-IR spectra. This indicates new chemical bonds, introduced through the surface modification. The unmodified rutile-TiO2 NPs absorbed moisture, increasing their mass by 3.88%, compared with the modified nanoparticles, which released moisture instead. TGA analysis revealed that AKD- and ASA-modified rutile-TiO2 needed higher temperatures than the unmodified rutile-TiO2 to markedly decompose. AKD, however, gave better performance than ASA in that regard. As an example, those modified with 5% AKD sustained a 45% higher temperature than the pure TiO2 nanoparticles. Furthermore, in both cases of the surfactants, the higher the percent of surfactant content was, the more thermally stable the nanoparticles became. This work demonstrates the possibility of fabricating rutile-TiO2 NPs to give improved hydrophobicity and thermal stability for possible dielectric applications such as in kraft paper for power transformer insulation.

Cell-load variation is considered as a major shortcoming in cellular manufacturing systems. It can cause long queues in front of machines and impose extra costs to the cellular layouts. In this paper the impact of inflation on cell-load variation in cellular manufacturing systems is examined. For this purpose, a new method is proposed for scheduling dynamic cellular manufacturing systems in the presence of bottleneck and parallel machines. The aim is finding the trade-off values between in-house manufacturing and using outsource services while system costs are not deterministic and may be varied from period to period by inflation. To solve the model, a hybrid Multi-layer perceptron is developed because of the high potential of outcomes to be trapped in the local optima. Our findings show that the condition of dynamic costs affects the routing of materials in process and may induce machine-load variation that yield to cell-load diversity. An increase in changing costs causes the loading level of each cell to vary, which in turn results in the development of “complex dummy sub-cells.” The results indicate that the proposed method can significantly reduce the level of cell-load variation in CMS.

This is one of the first studies on lightning incidents that take place in the neighbourhood of Lake Victoria, the largest tropical lake in the world that borders Uganda, Tanzania and Kenya. Lightning accident statistics in the region have been documented segment wise. The number of lightning occurrences in the north-western shore and that in the north-eastern shore were compared. The region has a distinctly recognizable season with high lightning accident density which runs from May to November and low lightning accident period from December to April. August peaks in lightning incidents. Lightning-related incidents are very much prevalent during the period between May and August due to the dominant south easterlies. The study reveals that the north-western part has slightly higher lightning accidents than the north-eastern part. North-eastern part records relatively high number of lightning accidents in the morning hours whereas the north-western sector experiences the same in the afternoon hours. Many features of lightning accidents and their locations have features that are in agreement with the same observed in other parts of East Africa. Following the statistics collected and incidents observed, suitable safety measures have been recommended for the communities that reside in the shores and nearby areas of Lake Victoria.

This is one of the first studies that has been conducted in Mongolia on the distribution of lightning incidents. The study covers a 10-year period from 2004 to 2013. The country records a human death rate of 15.4 deaths per 10 million people per year, which is much higher than that of many countries with similar isokeraunic level. The reason may be the low-grown vegetation observed in most rural areas of Mongolia, a surface topography, typical to steppe climate. We suggest modifications to Gomes–Kadir equation for such countries, as it predicts a much lower annual death rate for Mongolia. The lightning incidents spread over the period from May to August with the peak of the number of incidents occurring in July. The worst lightning affected region in the country is the central part. Compared with impacts of other convective disasters such as squalls, thunderstorms and hail, lightning stands as the second highest in the number of incidents, human deaths and animal deaths. Economic losses due to lightning is only about 1% of the total losses due to the four extreme weather phenomena. However, unless precautionary measures are not promoted among the public, this figure of losses may significantly increase with time as the country is undergoing rapid industrialization at present.

Dumps of a mining-metallurgical complex of post-Soviet Republics have accumulated a huge amount of technogenic waste products. Out of them, Kazakhstan alone has preserved about 20 billion tons. In the field of technogenic waste treatment, there is still no technical solution that leads it to be a profitable process. Recent global trends prompted scientists to focus on developing energy-saving and a highly efficient melting unit that can significantly reduce specific fuel consumption. This paper reports, the development of a new technological method-smelt layer of inversion phase. The introducing method is characterized by a combination of ideal stirring and ideal displacement regimes. Using the method of affine modelling, recalculation of pilot plant's test results on industrial sample has been obtained. Experiments show that in comparison with bubbling and boiling layers of smelt, the degree of zinc recovery increases in the layer of inversion phase. That indicates the reduction of the possibility of new formation of zinc silicates and ferrites from recombined molecules of ZnO, SiO2, and Fe2O3. Calculations show that in industrial samples of the pilot plant, the consumption of natural gas has reduced approximately by two times in comparison with fuming-furnace. The specific fuel consumption has reduced by approximately four times in comparison with Waelz-kiln.

Protection of medium voltage (MV) overhead lines against the indirect effects of lightning is an important issue in Malaysia and other tropical countries. Protection of these lines against the indirect effects of lightning is a major concern and can be improved by several ways. The choice of insulator to be used for instance, between the glass, ceramic or polymer, can help to improve the line performance from the perspective of increasing the breakdown strength. In this paper, the electrical performance of a 10 kV polymer insulator under different conditions for impulse, weather and insulator angle with respect to a cross-arm were studied (both experimental and modelling) and the results were discussed accordingly. Results show that the weather and insulator angle (with respect to the cross-arm) are surprisingly influenced the values of breakdown voltage and leakage current for both negative and positive impulses. Therefore, in order to select a proper protection system for MV lines against lightning induced voltage, consideration of the local information concerning the weather and also the insulator angles with respect to the cross-arm are very useful for line stability and performance.

Pollution in Southeast Asia is a major public energy problem and the cause of energy losses. A significant problem with respect to this type of pollution is that it decreases energy yield. In this study, two types of photovoltaic (PV) solar arrays were used to evaluate the effect of air pollution. The performance of two types of solar arrays were analysed in this research, namely, two units of a 1 kWp tracking flat photovoltaic (TFP) and two units of a 1 kWp fixed flat photovoltaic arrays (FFP). Data analysis was conducted on 2,190 samples at 30 min intervals from 01st June 2013, when both arrays were washed, until 30th June 2013. The performance was evaluated by using environmental data (irradiation, temperature, dust thickness, and air pollution index), power output, and energy yield. Multiple regression models were predicted in view of the environmental data and PV array output. Results showed that the fixed flat system was more affected by air pollution than the tracking flat plate. The contribution of this work is that it considers two types of photovoltaic arrays under the Southeast Asian pollution 2013.

Global solar radiation is generally measured on a horizontal surface, whereas the maximum amount of incident solar radiation is measured on an inclined surface. Over the last decade, a number of models were proposed for predicting solar radiation on inclined surfaces. These models have various scopes; applicability to specific surfaces, the requirement for special measuring equipment, or limitations in scope. To find the most suitable model for a given location the hourly outputs predicted by available models are compared with the field measurements of the given location. The main objective of this study is to review on the estimation of the most accurate model or models for estimating solar radiation components for a selected location, by testing various models available in the literature. To increase the amount of incident solar radiation on photovoltaic (PV) panels, the PV panels are mounted on tilted surfaces. This article also provides an up-to-date status of different optimum tilt angles that have been determined in various countries.

Background COVID-19 has drastically dampened human activities since early 2020. Studies have shown that this has resulted in changes in air temperature and humidity. Since lightning activities are dependent on air temperature and humidity, this study is conducted to evaluate the correlation between the intensity of lightning activities with the atmospheric changes, and investigates the changes, in lightning activities due to atmospheric changes during the COVID-19 pandemic. Methods The hypothesis was tested through a t-test and Pearson’s correlation study. The variation trend of lightning strikes count (LSC) in Europe and Oceania during the five months COVID-19 lockdown period (March – July) compared to the same period in the previous five years from 2015 to 2019 is investigated. Results Statistical analysis shows the LSC in Europe and Oceania during the lockdown period dropped significantly by more than 50% and 44% respectively compared to the same period in previous five years. Furthermore, LSC was found to be positively correlated with air temperature and relative humidity in Europe. However, in Oceania, LSC seems to be only positively correlated with air temperature but negatively correlated with relative humidity. Conclusions This study seems to suggest that lightning activities have significantly changed during this pandemic due to reduction in human activities.

Introduction: Malaysia is one of the countries with the highest lightning flash density globally. While sufficiency of lightning protection system is crucial to ensure human safety against lightning strikes, the public awareness towards lightning safety is also equally important in Malaysia. Hence, this study was conducted to understand the current lightning safety awareness level of the Malaysian population. Methods: An online questionnaire survey which consists of 22 scientific statements of lightning was first developed in Malay and English. The questionnaire allows the respondent to also check their own score upon completion of the questionnaire. It was then distributed to the public for data collection. The sample size comprised of both genders, all layers of society from various educational level and social background. Results: Overall, the awareness on lightning safety amongst Malaysian is at moderate level with an average score of slightly above 50%. Urbanites scored marginally better than their rural counterparts. One’s education level does not dictate their awareness level of lightning safety. Discussion: In conclusion, the public in Malaysia needs to be better educated on lightning safety. Similar studies should be replicated in other countries experiencing similar levels of lightning activity to better understand the public’s perception on lightning.

Background COVID-19 has drastically dampened human activities since early 2020. Studies have shown that this has resulted in changes in air temperature and humidity. Since lightning activities are dependent on air temperature and humidity, this study is conducted to evaluate the correlation between the intensity of lightning activities with the atmospheric changes, and investigates the changes, in lightning activities due to atmospheric changes during the COVID-19 pandemic. Methods The hypothesis was tested through a t-test and Pearson’s correlation study. The variation trend of lightning strikes count (LSC) in Europe and Oceania during the five months COVID-19 lockdown period (March – July) compared to the same period in the previous five years from 2015 to 2019 is investigated. Results Statistical analysis shows the LSC in Europe and Oceania during the lockdown period dropped significantly by more than 50% and 44% respectively compared to the same period in previous five years. Furthermore, LSC was found to be positively correlated with air temperature and relative humidity in Europe. However, in Oceania, LSC seems to be only positively correlated with air temperature but negatively correlated with relative humidity. Conclusions This study seems to suggest that lightning activities have significantly changed during this pandemic due to reduction in human activities.