Search

BACKGROUND: Lumbar spine injuries in fast bowlers account for the greatest missed playing time in cricket. A range of extrinsic and intrinsic variables are hypothesised to be associated with low back pain and lumbar spine injury in fast bowlers, and an improved understanding of intrinsic variables is necessary as these may alter load tolerance and injury risk associated with fast bowling. This review critically evaluated studies reporting intrinsic variables associated with low back pain and lumbar spine injury in fast bowlers and identified areas for future investigation. METHODS: OVID Medline, EMBASE, SPORTDiscus, CINAHL, Web of Science and SCOPUS databases were last searched on 3 June 2022 to identify studies investigating intrinsic variables associated with low back pain and lumbar spine injury in cricket fast bowlers. Terms relevant to cricket fast bowling, and intrinsic variables associated with lumbar spine injury and low back pain in fast bowlers were searched. 1,503 abstracts were screened, and 118 full-text articles were appraised to determine whether they met inclusion criteria. Two authors independently screened search results and assessed risk of bias using a modified version of the Quality in Prognostic Studies tool. RESULTS: Twenty-five studies met the inclusion criteria. Overall, no included studies demonstrated a low risk of bias, two studies were identified as moderate risk, and twenty-three studies were identified as high risk. Conflicting results were reported amongst studies investigating associations of fast bowling kinematics and kinetics, trunk and lumbar anatomical features, anthropometric traits, age, and neuromuscular characteristics with low back pain and lumbar spine injury. CONCLUSION: Inconsistencies in results may be related to differences in study design, injury definitions, participant characteristics, measurement parameters, and statistical analyses. Low back pain and lumbar spine injury occurrence in fast bowlers remain high, and

There are several complications associated with lumbar interbody fusion surgery however, pseudarthrosis (non-union) presents a multifaceted challenge in the postoperative management of the patient. Rates of pseudarthrosis range from 3 to 20 % in patients with healthy bone and 20 to 30 % in patients with osteoporosis. The current methods in post-operative follow-up - radiographs and CT, have high false positive rates and poor agreement between them. The aim of this study was to develop and test a proof-of-concept load-sensing interbody cage that may be used to monitor fusion progression. Piezoresistive pressure sensors were calibrated and embedded within a polyether ether ketone (PEEK) interbody cage. Silicone and poly (methyl methacrylate) (PMMA) were inserted in the graft regions to simulate early and solid fusion. The load-sensing cage was subjected to distributed and eccentric compressive loads up to 900 N between synthetic lumbar vertebral bodies. Under maximum load, the anterior sensors recorded a 56-58 % reduction in pressure in the full fusion state compared to early fusion. Lateral regions measured a 36-37 % stress reduction while the central location reduced by 45 %. The two graft states were distinguishable by sensor-recorded pressure at lower loads. The sensors more effectively detected left and right eccentric loads compared to anterior and posterior. Further, the load-sensing cage was able to detect changes in endplate stiffness. The proof-of-concept 'smart' cage could detect differences in fusion state, endplate stiffness, and loading conditions in this in vitro experimental setup.

Extreme lateral interbody fusion (XLIF) may be performed with a standalone interbody cage, or with the addition of unilateral or bilateral pedicle screws; however, decisions regarding supplemental fixation are predominantly based on clinical indicators. This study examines the impact of posterior supplemental fixation on facet micromotions, cage loads and load-patterns at adjacent levels in a L4-L5 XLIF at early and late fusion stages. CT data from an asymptomatic subject were segmented into anatomical regions and digitally stitched into a surface mesh of the lumbosacral spine (L1-S1). The interbody cage and posterior instrumentation (unilateral and bilateral) were inserted at L4-L5. The volumetric mesh was imported into finite element software for pre-processing, running nonlinear static solves and post-processing. Loads and micromotions at the index-level facets reduced commensurately with the extent of posterior fixation accompanying the XLIF, while load-pattern changes observed at adjacent facets may be anatomically dependent. In flexion at partial fusion, compressive stress on the cage reduced by 54% and 72% in unilateral and bilateral models respectively; in extension the reductions were 58% and 75% compared to standalone XLIF. A similar pattern was observed at full fusion. Unilateral fixation provided similar stability compared to bilateral, however there was a reduction in cage stress-risers with the bilateral instrumentation. No changes were found at adjacent discs. Posterior supplemental fixation alters biomechanics at the index and adjacent levels in a manner that warrants consideration alongside clinical information. Unilateral instrumentation is a more efficient option where the stability requirements and subsidence risk are not excessive.

Extreme lateral interbody fusion allows for the insertion of a large-footprint interbody cage while maintaining the presence of natural stabilizing ligaments and the facets. It is unclear how the load-distribution mechanisms through these structures alter with temporal changes in the bone graft. The aim of this study was to examine the effects of temporal bone graft changes on load distribution among the cage, graft, and surrounding spinal structures using finite element analysis. Thoracolumbosacral spine computed tomography data from an asymptomatic male subject were segmented into anatomical regions of interest and digitally stitched to generate a surface mesh of the lumbar spine (L1-S1). The interbody cage was inserted into the L4-L5 region during surface meshing. A volumetric mesh was generated and imported into finite element software for pre-processing, running nonlinear static solves, and post-processing. Temporal stiffening was simulated in the graft region with unbonded (Soft Callus, Temporal Stages 1-3, Solid Graft) and bonded (Partial Fusion, Full Fusion) contact. In flexion and extension, cage stress reduced by 20% from the soft callus to solid graft state. Force on the graft was directly related to its stiffness, and load-share between the cage and graft improved with increasing graft stiffness, regardless of whether contact was fused with the endplates. Fused contact between the cage-graft complex and the adjacent endplates shifted load-distribution pathways from the ligaments and facets to the implant, however, these changes did not extend to adjacent levels. These results suggest that once complete fusion is achieved, the existing load paths are seemingly diminished.

INTRODUCTION: Understanding practice-based differences in treatment of lumbar disc herniations (LDHs) is vital for reducing unwarranted variation in the delivery of spine surgical health care. Identifying factors that influence surgeons' decision-making will offer useful insights for developing the most cost-effective and safest surgical strategy as well as developing surgeon education materials for common lumbar pathologies. This study was to capture any variation in techniques used by surgeons in Australia and New Zealand (ANZ) region, and perceived complications of different surgical procedures for primary and recurrent LDH (rLDH). MATERIALS AND METHODS: Web-based survey study was emailed to orthopaedic and neurosurgeons who routinely performed spinal surgery in ANZ from Decmber 20, 2018 to February 20, 2020. The response data were analyzed to assess for differences based on geography, practice setting, speciality, practice experience, practice length, and operative volume. RESULTS: Invitations were sent to 150 surgeons; 96 (64%) responded. Most surgeons reported microdiscectomy as their surgical technique of choice for primary LDH (73%) and the first rLDH (72%). For the second rLDH, the preferred choice for most surgeons was fusion surgery (82%). A surgeon's practice setting (academic/private/hybrid) was a statistically significant factor in what surgical procedure was chosen for the first rLDH (P = 0.014). When stratifying based on surgeon experience, there were statisfically significant differences based on the annual volume of spine surgeries performed (perceived reherniation rates following primary discectomy, P = 0.013; perceived reherniation rates following revision surgeries, P = 0.017; perceived intraoperative complications rates following revision surgeries, P = 0.016) and based on the annual volume of lumbar discectomies performed (perceived reherniation rates following revision surgeries, P = 0.022; perceived intraoperative complications rates followi

STUDY DESIGN: Translational review encompassing basic science and clinical evidence. OBJECTIVES: Multiple components of the lumbar spine interact during its normal and pathological function. Bony stress in the lumbar spine is recognized as a factor in the development of pars interarticularis defect and stress fractures, but its relationship with intervertebral disc (IVD) degeneration is not well understood. Therefore, we conducted a systematic review to examine the relationship between bony stress and IVD degeneration. METHODS: Online databases Scopus, PubMed and MEDLINE via OVID were searched for relevant studies published between January 1980-February 2020, using PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-analyses) guidelines. Two authors independently analyzed the data, noting characteristics and biases in various studies. RESULTS: Thirty-two articles were included in the review: 8 clinical studies, 9 finite element modeling studies, 3 in-vivo biomechanical testing studies, and 12 in-vitro biomechanical testing studies. Of the 32 articles, 19 supported, 4 rejected and 9 made no conclusion on the hypothesis that there is a positive associative relationship between IVD degeneration and bony stress. However, sufficient evidence was not available to confirm or reject a causal relationship. CONCLUSIONS: Most studies suggest that the prevalence of IVD degeneration increases in the presence of bony stress; whether a causal relationship exists is unclear. The literature recommends early diagnosis and clinical suspicion of IVD degeneration and bony stress. Longitudinal studies are required to explore causal relationships between IVD degeneration and bony stress.

BACKGROUND: The critical shoulder angle (CSA) is a radiographic measurement that provides an assessment of both glenoid inclination and acromial length. Higher values may correlate with the presence of rotator cuff tears. However, it is difficult to obtain a high-quality true anteroposterior (AP) radiograph of the shoulder, with any excess scapular version or flexion/extension resulting in deviation from the true CSA value. Three-dimensional (3D) bony reconstructions of computed tomography (CT) shoulder scans may be able to be rotated to obtain a similar view to that of true AP radiographs. AIM: To compare CSA measurements performed on 3D bony CT reconstructions, with those on corresponding true AP radiographs. METHODS: CT shoulder scans were matched with true AP radiographs that were classified as either Suter-Henninger type A or C quality. 3D bony reconstructions were segmented from the CT scans, and rotated to replicate an ideal true AP view. Two observers performed CSA measurements using both CT and radiographic images. Measurements were repeated after a one week interval. Reliability was assessed using intraclass correlation coefficients (ICCs) and Bland-Altman plots [bias, limits of agreement (LOA)]. RESULTS: Twenty CT shoulder scans were matched. The mean CSA values were 32.55° (± 4.26°) with radiographs and 29.82° (± 3.49°) with the CT-based method [mean difference 2.73° (± 2.86°); P < 0.001; bias +2.73°; LOA -2.17° to +7.63°]. There was a strong correlation between the two methods (r = 0.748; P < 0.001). Intra-observer reliability was similar, but the best intra-observer values were achieved by the most experienced observer using the CT-based method [ICC: 0.983 (0.958-0.993); bias +0.03°, LOA -1.28° to +1.34°]. Inter-observer reliability was better with the CT-based method [ICC: 0.897 (0.758-0.958), bias +0.24°, LOA -2.93° to +3.41°]. CONCLUSION: The described CT-based method may be a suitable alternative for critical shoulder angle measurement, as it overc

Low back pain is the leading cause of years lived with disability worldwide and thus a significant burden on the economy and healthcare systems. Degenerative changes and/or repetitive abnormal loading in the lumbar spine could lead to structural failures of the intervertebral disc and herniation of the nucleus pulposus, all of which may manifest as chronic back and/or leg pain. Although lumbar discectomy is a clinically beneficial procedure for appropriately selected disc herniation patients, revision discectomy rates range from 2% to 18% within the first decade of the primary discectomy, especially in patients younger than 65 years. Discectomy being a tissue discarding procedure may compromise the biomechanical integrity of the disc and accelerate its degeneration. Nucleus replacement (NR) implants present a promising option to address some of the challenges surrounding lumbar discectomy. An NR implant may be used as an adjunct to discectomy to preserve the biomechanical integrity of the disc and minimize recurrent herniation of the nuclear tissue. Nonetheless, a systematic review of the literature on clinical outcomes for NR implants revealed high rates for endplate remodeling and implant subsidence. A detailed multiscale understanding of the mechanisms of disc herniation and reherniation, closure of the annular defect, and the ability to tailor geometry and material properties for individual patients are needed to develop the next generation of NR implants.

Periodic inspection and assessment are important for scoliosis patients. 3D ultrasound imaging has become an important means of scoliosis assessment as it is a real-time, cost-effective and radiation-free imaging technique. With the generation of a 3D ultrasound volume projection spine image using our Scolioscan system, a series of 2D coronal ultrasound images are produced at different depths with different qualities. Selecting a high quality image from these 2D images is the crucial task for further scoliosis measurement. However, adjacent images are similar and difficult to distinguish. To learn the nuances between these images, we propose selecting the best image automatically, based on their quality rankings. Here, the ranking algorithm we use is a pairwise learning-to-ranking network, RankNet. Then, to extract more efficient features of input images and to improve the discriminative ability of the model, we adopt the convolutional neural network as the backbone due to its high power of image exploration. Finally, by inputting the images in pairs into the proposed convolutional RankNet, we can select the best images from each case based on the output ranking orders. The experimental result shows that convolutional RankNet achieves better than 95.5% top-3 accuracy, and we prove that this performance is beyond the experience of a human expert.

© 2019, Springer-Verlag GmbH Germany, part of Springer Nature. Purpose: Animal models are frequently used to elucidate pathomechanism and pathophysiology of various disorders of the human intervertebral disc (IVD) and also to develop therapeutic approaches. Here we report morphological characteristics of the kangaroo lumbar IVDs and compare them with other animal models used in spine research. Methods: Twenty-five fresh-frozen cadaveric lumbar spines (T12–S1) derived from kangaroo carcases (Macropus giganteus) of undetermined age were first scanned in a C-Arm X-ray machine. A photograph of the axial section of the disc including a calibrated metric scale was also acquired. The digital radiographs and photographs were processed in ImageJ to determine the axial and sagittal plane dimensions for the whole disc (WD) and the nucleus pulposus (NP) and the mid-sagittal disc height for all the lumbar levels. Results: Our results suggest that the L6–S1 IVD in kangaroos is distinctly large compared with the upper lumbar IVDs. Based on previously published data, human lumbar IVDs are the largest of all the animal IVDs used in spine research, with camelid cervical IVDs being the closest relative in absolute dimensions (llamas: 78% in disc height, 40% in WD volume, and 38% in NP volume). Kangaroo L6–S1 IVD was approximately 51% in height, 20% in WD volume, and 20% in NP volume of the human lumbar IVD. Conclusions: We conclude that morphological similarities exist between a kangaroo and human lumbar IVD, especially with the lima bean shape in the axial plane, wedge shape in the sagittal plane, convexity at the cephalad endplates, and percentage volume occupied by the NP in the IVD. Graphic abstract: These slides can be retrieved under Electronic Supplementary Material. [Figure not available: see fulltext.]

STUDY DESIGN:A retrospective cross-sectional study. OBJECTIVE:To assess the sensitivity to change and reliability of various mid-sagittal and axial plane metrics in the assessment of patients with single-level degenerative cervical stenosis on T2-weighted MR imaging. SETTING:A diagnostic MR imaging facility in Sydney (Australia). METHODS:We retrospectively reviewed T2-weighted MR images of 85 consecutive patients (48 M and 37 F) with single-level degenerative cervical stenosis. Canal compromise and cord compression were evaluated using three mid-sagittal plane metrics (M1, M2, and M3) and two axial plane metrics (M4 and M5), at the level of stenosis and nonstenotic cephalad and caudal levels (controls). Sensitivity to change (SC) for each metric was evaluated as the percentage deviation of the measured value from the estimated normal value based on cephalad and caudal controls. Reliability for each metric was evaluated using intraclass correlation coefficients. RESULTS:Degenerative cervical stenosis showed a bimodal distribution peaking at C5-6 (n = 32) and C3-4 (n = 29) levels. The changes in the canal and cord geometry along the rostrocaudal axis were inconsistent. Across all individual subjects (reflecting a range of stenosis severity), M3 (-32.87% ± 10.60%) was more sensitive to change compared with M1 (16.64% ± 16.48%) and M2 (-23.95% ± 11.12%). Similarly, M4 (-24.62% ± 12.17%) was more sensitive to change compared with M5 (-6.71% ± 11.08%). The level of reliability was "moderate" to "excellent" for mid-sagittal plane measurements, and "poor" to "excellent" for axial plane measurements. CONCLUSION:Changes in canal dimensions in the mid-sagittal plane and cord shape in the axial plane are sensitive indicators of degenerative cervical stenosis on T2-weighted MR images.

Introduction: Estimation of intervertebral disc degeneration on magnetic resonance imaging (MRI) is challenging. Qualitative schemes used in clinical practice correlate poorly with pain and quantitative techniques have not entered widespread clinical use. Methods: As part of a prior study, 25 New Zealand white rabbits underwent annular puncture to induce disc degeneration in 50 noncontiguous lumbar discs. At 16 weeks, the animals underwent multi-echo T2 MRI scanning and were euthanized. The discs were stained and examined histologically. Quantitative T2 relaxation maps were prepared using the nonlinear least squares method. Decay Variance maps were created using a novel technique of aggregating the deviation in the intensity of each echo signal from the expected intensity based on the previous rate of decay. Results: Decay Variance maps showed a clear and well demarcated nucleus pulposus with a consistent rate of decay (low Decay Variance) in healthy discs that showed progressively more variable decay (higher Decay Variance) with increasing degeneration. Decay Variance maps required significantly less time to generate (1.0 ± 0.0 second) compared with traditional T2 relaxometry maps (5 (±0.9) to 1788.9 (±116) seconds). Histology scores correlated strongly with Decay Variance scores (r = 0.82, P <.01) and weakly with T2 signal intensity (r = 0.32, P <.01) and quantitative T2 relaxometry (r = 0.39, P <.01). Decay Variance had superior sensitivity and specificity for the detection of degenerate discs when compared to T2 signal intensity or Quantitative T2 mapping. Conclusion: Our results show that using a multi-echo T2 MRI sequence, Decay Variance can quantitatively assess disc degeneration more accurately and with less image-processing time than quantitative T2 relaxometry in a rabbit disc puncture model. The technique is a viable candidate for quantitative assessment of disc degeneration on MRI scans. Further validation on human subjects is needed.

Purpose: Abnormal stress in the lumbar vertebra, also known as bony stress, can be a precursor to degenerative changes which may manifest as low back pain (LBP). However, the prevalence of bony stress in the lumbar spine and its relationship with degenerative changes and LBP is unclear. The purpose of this study was to evaluate the prevalence of bony stress in the lumbar spine and its relationship with intervertebral disc (IVD) degeneration, facet osteoarthritis and LBP in patients under 25 years of age. Method(s): A retrospective case-control study of 130 patients under 25 years of age was conducted from a population of 493 patients who had lumbar MRI across three imaging centres over three years. A cohort of 55 consecutive patients with bony stress was identified. A control group of consecutive patients (n = 75) without bony stress was also selected from the population. Result(s): Bony stress was prevalent in 11% (95% CI [8.4-14.5%]) of patients and was not diagnosed in 36% (95% CI [22-55%]) of these cases. Patients with bony stress had over twofold (OR 2.3, 95% CI [1.1-4.8]) and fivefold (OR 5.3, 95% CI [2.11-13.3]) higher likelihood of having IVD degeneration and LBP, respectively, when compared with the control group. Bony stress was not found to be associated with facet osteoarthritis. Conclusion(s): Bony stress in the lumbar spine was prevalent in 11% of patients under 25 years of age. It was commonly undiagnosed in radiology reports (not reported in 36% of the cases). Being significantly associated and with an increased likelihood of IVD degeneration and LBP, we posit that bony stress is likely a symptomatic and clinically meaningful diagnostic entity in the assessment of LBP. Graphic abstract: These slides can be retrieved under Electronic Supplementary Material.[Figure not available: see fulltext.].Copyright © 2019, Springer-Verlag GmbH Germany, part of Springer Nature.

© 2019, Springer-Verlag GmbH Germany, part of Springer Nature. Purpose: Abnormal stress in the lumbar vertebra, also known as bony stress, can be a precursor to degenerative changes which may manifest as low back pain (LBP). However, the prevalence of bony stress in the lumbar spine and its relationship with degenerative changes and LBP is unclear. The purpose of this study was to evaluate the prevalence of bony stress in the lumbar spine and its relationship with intervertebral disc (IVD) degeneration, facet osteoarthritis and LBP in patients under 25 years of age. Methods: A retrospective case–control study of 130 patients under 25 years of age was conducted from a population of 493 patients who had lumbar MRI across three imaging centres over three years. A cohort of 55 consecutive patients with bony stress was identified. A control group of consecutive patients (n = 75) without bony stress was also selected from the population. Results: Bony stress was prevalent in 11% (95% CI [8.4–14.5%]) of patients and was not diagnosed in 36% (95% CI [22–55%]) of these cases. Patients with bony stress had over twofold (OR 2.3, 95% CI [1.1–4.8]) and fivefold (OR 5.3, 95% CI [2.11–13.3]) higher likelihood of having IVD degeneration and LBP, respectively, when compared with the control group. Bony stress was not found to be associated with facet osteoarthritis. Conclusion: Bony stress in the lumbar spine was prevalent in 11% of patients under 25 years of age. It was commonly undiagnosed in radiology reports (not reported in 36% of the cases). Being significantly associated and with an increased likelihood of IVD degeneration and LBP, we posit that bony stress is likely a symptomatic and clinically meaningful diagnostic entity in the assessment of LBP. Graphic abstract: These slides can be retrieved under Electronic Supplementary Material.[Figure not available: see fulltext.].

© The Author(s) 2019. Prostate cancer (CaP) is the most commonly diagnosed cancer in males in western countries. Orthotopic implantation is considered as an ideal xenograft model for CaP study, and noninvasive measurement of tumor volume changes is important for monitoring responses to anticancer therapies. In this study, the T2-weighted fast spin echo sequence magnetic resonance imaging (MRI) was performed on a CaP orthotopic non-obese diabetic/severe combined immunodeficiency (NOD/SCID) mouse model weekly for 6 weeks post PC-3 CaP cell inoculation, and the fat signal was suppressed using a chemical shift-selective pulse. Subsequently, the MRI data were imported into the image processing software Avizo Standard and stacked into three-dimensional (3D) volumes. Our results demonstrate that MRI, combined with 3D reconstruction, is a feasible and sensitive method to assess tumor growth in a PC-3 orthotopic CaP mouse model and this established monitoring approach is promising for longitudinal observation of CaP xenograft development after anticancer therapy in vivo. Further investigation is needed to validate this protocol in a larger cohort of mice to generate enough statistical power.

Introduction: Estimation of intervertebral disc degeneration on magnetic resonance imaging (MRI) is challenging. Qualitative schemes used in clinical practice correlate poorly with pain and quantitative techniques have not entered widespread clinical use. Methods: As part of a prior study, 25 New Zealand white rabbits underwent annular puncture to induce disc degeneration in 50 noncontiguous lumbar discs. At 16 weeks, the animals underwent multi-echo T2 MRI scanning and were euthanized. The discs were stained and examined histologically. Quantitative T2 relaxation maps were prepared using the nonlinear least squares method. Decay Variance maps were created using a novel technique of aggregating the deviation in the intensity of each echo signal from the expected intensity based on the previous rate of decay. Results: Decay Variance maps showed a clear and well demarcated nucleus pulposus with a consistent rate of decay (low Decay Variance) in healthy discs that showed progressively more variable decay (higher Decay Variance) with increasing degeneration. Decay Variance maps required significantly less time to generate (1.0 ± 0.0 second) compared with traditional T2 relaxometry maps (5 (±0.9) to 1788.9 (±116) seconds). Histology scores correlated strongly with Decay Variance scores (r = 0.82, P < .01) and weakly with T2 signal intensity (r = 0.32, P < .01) and quantitative T2 relaxometry (r = 0.39, P < .01). Decay Variance had superior sensitivity and specificity for the detection of degenerate discs when compared to T2 signal intensity or Quantitative T2 mapping. Conclusion: Our results show that using a multi-echo T2 MRI sequence, Decay Variance can quantitatively assess disc degeneration more accurately and with less image-processing time than quantitative T2 relaxometry in a rabbit disc puncture model. The technique is a viable candidate for quantitative assessment of disc degeneration on MRI scans. Further validation on human subjects is needed.

Study Design: A biomechanical study using finite element analysis. Objectives: The main objective of this study was to investigate the role of sacral slope in the progression of a L5 bilateral spondylolytic defect to spondylolisthesis. Methods: A 3-dimensional model of lumbosacral spine was built using computed tomography (CT) data procured from an anonymized healthy male subject. The segmented CT data was manipulated to generate 3 more models representing L5 bilateral spondylolytic defect with normal sacral slope (SS), sacral slope increased by 10° (SS+10), and sacral slope decreased by 10° (SS-10). The 3D models were imported into finite element modelling software Strand7 for preprocessing, running nonlinear static solves, and postprocessing of the results. Results: Directional biomechanical instabilities were induced in the lumbosacral spine as a result of changes in the L5-S1 disc shape secondary to the changes in sacral slope. Compared with the normal L5 lytic model, wedging of the L5-S1 disc (SS+10) resulted in a significantly greater range of motion in flexion (18% ↑) but extension motion characteristics were similar. Conversely, flattening of the L5-S1 disc (SS-10) resulted in a significantly greater range of motion in extension (16% ↑) but flexion motion characteristics were similar to that of the normal L5 lytic model. Conclusions: Variations in sacral slope while preserving the L5-S1 mid-disc height and orientation of the L5 vertebra resulted in variations in the L5-S1 disc shape. The results suggest that for such extremities in the L5-S1 disc shape different pathomechanisms exist for the progression of the L5 lytic defect to spondylolisthesis.

Background: Spondylolytic (or lytic) spondylolisthesis is often associated with disc degeneration at the index-level; however, it is not clear if disc degeneration is the cause or the consequence of lytic spondylolisthesis. The main objective of this computed tomography based finite element modelling study was to examine the role of different grades of disc degeneration in the progression of a bilateral L5-lytic defect to spondylolisthesis. Methods: High-resolution computed tomography data of the lumbosacral spine from an anonymised healthy male subject (26 years old) were segmented to build a 3D-computational model of an INTACT L1-S1 spine. The INTACT model was manipulated to generate four more models representing a bilateral L5-lytic defect and the following states of the L5-S1 disc: nil degeneration (NOR LYTIC), mild degeneration (M-DEG LYTIC), mild degeneration with 50% disc height collapse (M-DEG-COL LYTIC), and severe degeneration with 50% disc height collapse(S-COL LYTIC). The models were imported into a finite element modelling software for pre-processing, running nonlinear-static solves, and post-processing of the results. Results: Compared with the baseline INTACT model, M-DEG LYTIC model experienced the greatest increase in kinematics (Fx range of motion: 73% ↑, Fx intervertebral translation: 53%↑), shear stresses in the annulus (Fx anteroposterior: 163%↑, Fx posteroanterior: 31%↑), and strain in the iliolumbar ligament (Fx: 90%↑). The S-COL LYTIC model experienced a decrease in mobility (Fx range of motion: 48%↓, Fx intervertebral translation: 69%↓) and an increase in normal stresses in the annulus (Fx Tensile: 170%↑; Fx Compressive: 397%↑). No significant difference in results was noted between M-DEG-COL LYTIC and S-COL LYTIC models. Conclusions: In the presence of a bilateral L5 spondylolytic defect, a mildly degenerate index-level disc experienced greater intervertebral motions and shear stresses compared with a severely degenerate index-level disc in

PURPOSE: The relationship between biomechanical instability and degenerative changes in the lumbar spine in chronic low back pain (CLBP) patients remains controversial. The main objective of this retrospective radiographical study was to evaluate changes in kinematics at different lumbar levels (in particular the L5-S1 level) with progressive grades of disc degeneration and facet joint osteoarthritis in CLBP patients. METHODS: Using standing neutral and dynamic flexion/extension (Fx/Ex) radiographs of the lumbar spine, in vivo segmental kinematics at L1-L2 through L5-S1 were evaluated in 72 consecutive CLBP patients. Disc degeneration was quantified using changes in signal intensity and central disc height on mid-sagittal T2-weighted magnetic resonance (MR) scans. Additionally, the presence or absence of facet joint osteoarthritis was noted on T2-weighted axial MR scans. RESULTS: Disc degeneration and facet joint osteoarthritis occurred independent of each other at the L5-S1 level (p = 0.188), but an association was observed between the two at L4-L5 (p < 0.001) and L3-L4 (p < 0.05) levels. In the absence of facet joint osteoarthritis, the L5-S1 segment showed a greater range of motion (ROM) in Ex (3.3° ± 3.6°) and a smaller ROM in Fx (0.6° ± 4.2°) compared with the upper lumbar levels (p < 0.05), but the differences diminished in the presence of it. In the absence of facet joint osteoarthritis, no change in L5-S1 kinematics was observed with progressive disc degeneration, but in its presence, restabilisation of the L5-S1 segment was observed between mild and severe disc degeneration states. CONCLUSION: The L5-S1 motion segment exhibited unique degenerative and kinematic characteristics compared with the upper lumbar motion segments. Disc degeneration and facet joint osteoarthritis occurred independent of each other at the L5-S1 level, but not at the other lumbar levels. Severe disc degeneration in the presence of facet joint osteoarthritis biomechanically restabilis

© 2018 The Author(s). Background: Spondylolytic (or lytic) spondylolisthesis is often associated with disc degeneration at the index-level; however, it is not clear if disc degeneration is the cause or the consequence of lytic spondylolisthesis. The main objective of this computed tomography based finite element modelling study was to examine the role of different grades of disc degeneration in the progression of a bilateral L5-lytic defect to spondylolisthesis. Methods: High-resolution computed tomography data of the lumbosacral spine from an anonymised healthy male subject (26 years old) were segmented to build a 3D-computational model of an INTACT L1-S1 spine. The INTACT model was manipulated to generate four more models representing a bilateral L5-lytic defect and the following states of the L5-S1 disc: nil degeneration (NOR LYTIC), mild degeneration (M-DEG LYTIC), mild degeneration with 50% disc height collapse (M-DEG-COL LYTIC), and severe degeneration with 50% disc height collapse(S-COL LYTIC). The models were imported into a finite element modelling software for pre-processing, running nonlinear-static solves, and post-processing of the results. Results: Compared with the baseline INTACT model, M-DEG LYTIC model experienced the greatest increase in kinematics (Fx range of motion: 73% ↑, Fx intervertebral translation: 53%↑), shear stresses in the annulus (Fx anteroposterior: 163%↑, Fx posteroanterior: 31%↑), and strain in the iliolumbar ligament (Fx: 90%↑). The S-COL LYTIC model experienced a decrease in mobility (Fx range of motion: 48%↓, Fx intervertebral translation: 69%↓) and an increase in normal stresses in the annulus (Fx Tensile: 170%↑; Fx Compressive: 397%↑). No significant difference in results was noted between M-DEG-COL LYTIC and S-COL LYTIC models. Conclusions: In the presence of a bilateral L5 spondylolytic defect, a mildly degenerate index-level disc experienced greater intervertebral motions and shear stresses compared with a severely degenera

Study Design: A systematic review. Objective: The objective of this study was to determine the safety and efficacy of stand-alone anterior lumbar interbody fusion (sa-ALIF) for the treatment of symptomatic isthmic spondylolisthesis of L5-S1 by assessing the level of available clinical and radiographic evidence. Methods: A systematic review utilizing Medline, Embase, and Scopus online databases was undertaken. Clinical, radiographic, and adverse outcome data were extracted for the relevant isthmic spondylolisthesis cases with the intention of undertaking a meta-analysis. Results: The database search between January 1980 and December 2015 yielded 23 articles that concerned sa-ALIF for isthmic spondylolisthesis of L5-S1. Only in 9 of the 23 articles data could be extracted specific to sa-ALIF for isthmic spondylolisthesis of L5-S1. There was considerable inconsistency in the standards for reporting outcomes of the surgery due to which meta-analysis could not be undertaken, and hence each article was reviewed. Conclusions: There was insufficient evidence to support the safety and efficacy of sa-ALIF for the treatment of isthmic spondylolisthesis of L5-S1. Although sa-ALIF is widely documented in the literature, there was insufficient evidence to support its use in treating this specific pathology. The unique pathological and anatomical situation that isthmic spondylolisthesis of L5-S1 presents must be recognized and its treatment with sa-ALIF should be well thought out.

Most modelling of whole bones does not incorporate trabecular geometry and treats bone as a solid non-porous structure. Some studies have modelled trabecular networks in isolation. One study has modelled the performance of whole human bones incorporating trabeculae, although this required considerable computer resources and purpose-written code. The difference between mechanical behaviour in models that incorporate trabecular geometry and non-porous models has not been explored. The ability to easily model trabecular networks may shed light on the mechanical consequences of bone loss in osteoporosis and remodelling after implant insertion. Here we present a Finite Element Analysis (FEA) of a human ankle bone that includes trabecular network geometry. We compare results from this model with results from non-porous models and introduce protocols achievable on desktop computers using widely available softwares. Our findings show that models including trabecular geometry are considerably stiffer than non-porous whole bone models wherein the non-cortical component has the same mass as the trabecular network, suggesting inclusion of trabecular geometry is desirable. We further present new methods for the construction and analysis of 3D models permitting: (1) construction of multi-property, non-porous models wherein cortical layer thickness can be manipulated; (2) maintenance of the same triangle network for the outer cortical bone surface in both 3D reconstruction and non-porous models allowing exact replication of load and restraint cases; and (3) creation of an internal landmark point grid allowing direct comparison between 3D FE Models (FEMs). © 2012 Elsevier Ltd.