Search

Supercritical water gasification (SCWG) is a combined thermal decomposition and hydrolysis process for converting wet biomass feedstock with high water content potentially (80 wt%) to syngas. The process bypasses the need for an energy intensive pre-drying step and also needs relatively shorter residence times (of the order of seconds to minutes) when compared to conventional gasification. The main target of SCWG is to obtain syngas rich in hydrogen whilst minimising char formation. In recent years, SCWG studies have advanced from using model compounds (e.g. glucose and cellulose) towards the use of real biomass and its waste (e.g. sugarcane trash). The use of biomass as a feedstock creates real opportunities for the technology since it is available in some form, regardless of location. This review discusses the findings from SCWG studies that have used real biomass as a feedstock. The effects of reaction temperature, pressure, residence time and feedstock concentration to the hydrogen yields are presented. The relationship between the main components in biomass (cellulose, hemicellulose and lignin) and hydrogen yields are also discussed. Homogeneous and heterogeneous catalysts have been used to enhance SCWG with real biomass feedstock and the benefits of these approaches are also considered. The economic benefits of running the catalytic SCWG at 400 °C compared to non-catalytic operation at 600 °C is evaluated. Reactor configuration and process conditions vary across the literature, and various authors describe the associated challenges (char formation and plugging, corrosion) as well as promising solutions to tackle these key challenges.

This paper reports a techno-economic assessment for industrial scale bio-flocculant production with okra as biomass feedstock. The sludge dewatering ability of the bio-flocculant was evaluated prior to economic analysis. Several optimisation strategies were investigated in order to lower the bio-flocculant production cost. The results showed that continuous mode microwave extraction was more economically beneficial than conventional extraction in batch and continuous modes. Sensitivity analysis revealed that the production cost was significantly affected by annual production and extract yield, and moderately influenced by raw material price. The optimised scheme for bio-flocculant production was continuous mode microwave extraction at 90° C, a residence time of 10 minutes, a water loading of 3.5 w/w and production rate of 220 tonnes per year. The economic assessment showed that the gross margin was positive, return on investment was in the expected range of 20 to 30% and payback time was within 5 years.

Okra extract is known to have potential application as a bio-flocculant for wastewater treatment. However, no research to date has given insight into the components responsible for the flocculating ability of okra extract or its flocculating mechanism. The work presented here addresses this knowledge gap showing that pectin, especially pectin homogalacturonan (HGA) regions, appear to be the polysaccharides responsible for the flocculating ability of okra extract. The way pectin works in flocculation may be best explained by a polymer bridging mechanism. Specifically, a linear relationship between okra bio-flocculating ability and pectin homogalacturonan region to rhamnogalacturonan-I region weight ratio (HGA/RG-I) was found (y = 2.0x+47.6, R2 = 0.93, when GalA content > 300 mg/g extract), which was also validated using commercial citrus peel pectin.

The production of natural biopolymers as flocculants for water treatment is highly desirable due to their inherent low toxicity and low environmental footprint. In this study, bio-flocculants were extracted from Hibiscus/Abelmoschus esculentus (okra) by using a water extraction method, and the extract yield and its performance in sludge dewatering were evaluated. Single factor experimental design was employed to obtain the optimum conditions for extraction temperature (25–90 °C), time (0.25–5 h), solvent loading (0.5–5 w/w) and agitation speed (0–225 rpm). Results showed that extraction yield was affected non-linearly by all experimental variables, whilst the sludge dewatering ability was only influenced by the temperature of the extraction process. The optimum extraction conditions were obtained at 70 °C, 2 h, solvent loading of 2.5 w/w and agitation at 200 rpm. Under the optimal conditions, the extract yield was 2.38%, which is comparable to the extraction of other polysaccharides (0.69–3.66%). The bio-flocculants displayed >98% removal of suspended solids and 68% water recovery during sludge dewatering, and were shown to be comparable with commercial polyacrylamide flocculants. This work shows that bio-flocculants could offer a feasible alternative to synthetic flocculants for water treatment and sludge dewatering applications, and can be extracted using only water as a solvent, minimising the environmental footprint of the extraction process.

Flocculation is an essential phenomenon in industrial wastewater treatment. Inorganic coagulants (salts of multivalent metals) are being commonly used due to its low cost and ease of use. However, their application is constrained with low flocculating efficiency and the presence of residue metal concentration in the treated water. Organic polymeric flocculants are widely used nowadays due to its remarkable ability to flocculate efficiently with low dosage. However, its application is associated with lack of biodegradability and dispersion of monomers residue in water that may represent a health hazard. Therefore, biopolymers based flocculants have been attracting wide interest of researchers because they have the advantages of biodegradability and environmental friendly. But, natural flocculants are needed in large dosage due to its moderate flocculating efficiency and shorter shelf life. Thus, in order to combine the best properties of both, synthetic polymers are grafted onto the backbone of natural polymers to obtain tailor-made grafted flocculants. This paper gives an overview of the development of different types of flocculants that were being investigated for treatment of industrial wastewater. Furthermore, their flocculation performance will be reviewed and the flocculation mechanism will be discussed.

This study uses a combination of empirical observations and an analysis of mass transfer behaviour to yield new insights into the mechanism of microwave assisted extraction. Enhancements in extraction rate and yield were observed experimentally compared with conventional extraction at temperatures in excess of 50°C, however at lower temperatures there was no observable difference between the two processes. A step-change in extract yield between microwave and conventional processes was shown to be caused by selective heating. A temperature gradient of the order of 1oC is sufficient to reduce the water chemical potential within the cell structure, which changes the osmotic potential such that internal cell pressures can increase to the point where disruption occurs. This paper demonstrates the need to operate microwave extraction processes at a temperature that enables selective heating, and a newly-proposed mass transfer phenomenon that could have wider positive implications for extraction and leaching processes.

Flocculation is extensively employed for clarification through sedimentation. Application of eco-friendly plant-based bioflocculants in wastewater treatment has attracted significant attention lately with high removal capability in terms of solids, turbidity, color, and dye. However, moderate flocculating property and short shelf life restrict their development. To enhance the flocculating ability, natural polysaccharides derived from plants are chemically modified by inclusion of synthetic, nonbiodegradable monomers (e.g., acrylamide) onto their backbone to produce grafted bioflocculants. This review is aimed to provide an overview of the development and flocculating efficiencies of plant-based bioflocculants and grafted bioflocculants for the first time. Furthermore, the processing methods, flocculation mechanism, and the current challenges are discussed. All the reported studies about plant-derived bioflocculants are conducted under lab-scale conditions in wastewater treatment. Hence, the possibility to apply natural bioflocculants in food and beverage, mineral, paper and pulp, and oleo-chemical and biodiesel industries is discussed and evaluated.

Natural bio-flocculants were extracted from okra and Chinese yam using water extraction method, and the extract yield and their flocculating abilities were evaluated. Results showed that extraction of okra with seed removal and incubation followed by freeze drying enhanced the extract yield by 91% and improved the flocculating ability greatly by achieving solids removal of above 99% when compared with extraction without incubation and followed by oven drying. The effect of an incubation step was further investigated by using Chinese yam. With incubation, a higher extract yield of 2.95% was obtained compared with the extraction without incubation at 2.13% and high flocculating ability was achieved at 99.5% solids removal. To further investigate the application of bio-flocculants, the samples with the highest extract yield and flocculating ability were selected for a case study focusing on treatment of oleochemical wastewater. Yam bio-flocculant showed its flocculating activity with 80% solids removal when it was coupled with coagulant without pH alteration. However, pH adjustment was required for okra bio-flocculant. In conclusion, highly efficient okra and yam bio-flocculants were successfully extracted and their applicability to wastewater treatment was proven.