Search

Objective: This case report presents a female adult patient who exhibits poor oral hygiene, a mutilated dentition with multiple missing teeth, and skeletal asymmetry., Clinical Considerations: Interdisciplinary treatment was necessary to maintain oral hygiene, treat caries, extract residual roots, and upright a horizontally impacted third molar using a miniplate. Additionally, orthodontic mini-implants were utilized as anchorage to improve sagittal relationship and space closing. Space management was completed with orthodontic treatment, followed by restoration of the multiple missing teeth with dental implants., Conclusion: Consequently, an esthetic smile and functional occlusion were achieved by interdisciplinary treatment using orthodontic skeletal anchorage devices and dental implants., Clinical Significance: Missing mandibular first molar spaces were closed with retraction of the anterior teeth and protraction of the mandibular second molars using orthodontic mini-implants. The mandibular right third molar, which should have erupted, was protracted with the second molar, while the horizontally impacted mandibular left third molar was uprighted using a miniplate and was protracted with an orthodontic mini-implant. The missing maxillary lateral incisors were replaced with the maxillary canines, and the maxillary canines were replaced with the maxillary first premolars. The missing maxillary right second premolar and first molar and left first and second molars were successfully restored with dental implants., (© 2024 The Author(s). Journal of Esthetic and Restorative Dentistry published by Wiley Periodicals LLC.)

Objective: This finite element analysis (FEA) aimed to assess the stress distribution in the mandible and fixation system with various directions of the intermaxillary fixation (IMF) using mini-implants (MIs) and elastics following mandibular advancement with a bilateral sagittal split ramus osteotomy (BSSRO)., Materials and Methods: A total of nine mandibular advancement models were set according to the position of the MIs (1.6 mm in diameter, 8 mm in length) and direction of the IMF elastics (1/4 inch, 5 oz). Major and minor principal stresses in the cortical and cancellous bones, von Mises stresses in the fixation system (miniplate and monocortical screws), and bending angles of the miniplate were analysed., Results: Compressive and tensile stress distributions in the mandible and von Mises stress distributions in the fixation system were greater in models with a Class III IMF elastic direction and a higher IMF elastic force than in models with a Class II IMF elastic direction and a lower IMF elastic force. The bending angle of the miniplate was negligible., Conclusions: Stress distributions in the bone and fixation system varied depending on the direction, amount of force, and position of IMF elastics and MIs. Conclusively, IMF elastics in the Class II direction with minimal load in the area close to the osteotomy site should be recommended., (© 2023 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Deep bite is usually treated by intrusion of the anterior teeth, extrusion of the posterior teeth, or a combination thereof. Various traditional methods have been used to correct deep bites, but they can cause negative side effects. Recently, temporary skeletal anchorage devices (TSADs) have been used to intrude the anterior teeth simply and efficiently without side effects. The amount of incisal exposure at rest should be considered as the first factor in determining which tooth segment should be intruded to correct a deep bite. The center of resistance of the anterior teeth should be considered to achieve the proper biomechanics when intruding them. The location of TSADs should be determined to ensure sufficient interradicular bone to achieve the desired tooth movement. Therefore, clinicians should understand the biomechanical and clinical considerations to correct a deep bite using TSADs., (Copyright © 2023 World Federation of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Introduction: The objective of this prospective study was to examine the efficacy of posterior interradicular and infrazygomatic crest mini-implants for en-masse anterior retraction., Methods: The 22 patients were divided into two groups. In group 1 (IZC n = 11), mini-implants were placed in the infrazygomatic crests and in group 2 (IR, n = 11), mini-implants were placed in the molar-premolar interradicular sites. Soft tissue, skeletal, and dental treatment effects between two groups were compared using lateral cephalometric measurements., Results: The average angle between the cranial base and A point was 1.01 degrees (P = .004), and the linear distance between the upper incisor and A point was 2.67 to 5.2 millimetres (P = .00). In IZC group the maxillary incisor to the palatal plane moved upward by a mean of -5.20 mm (P = .059), whereas in IR group the incisor movement changed by -2.67 mm (P = .068). There was no significant difference between groups IZC and IR while comparing overall treatment changes on upper incisor position change, angle, and overjet., Conclusions: Mini-implants placed in between the molar and premolar as well as the infrazygomatic crest can withstand the deepening of the bite during retraction. Mini-implants in IZC are capable of causing intrusion of the anterior teeth and preventing intrusion of the molars, thereby providing absolute anchoring in all planes. Placement of the mini-implants in the infrazygomatic crest resulted in more linear retraction., (© 2023 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objective: This case report demonstrates an interdisciplinary approach to treat a 26-year-old male patient with hyperdivergent Class II skeletal pattern, maxillary transverse deficiency, slight anterior open bite, and multiple hopeless teeth with root rests., Clinical Considerations: An interdisciplinary treatment was required for oral hygiene improvement, caries treatment, extraction of residual roots and hopeless teeth, maxillary expansion using microimplant-assisted rapid palatal expansion, improvement of skeletal and dental relationship using orthodontic microimplants, and prosthetic restorations with the aid of dental implants., Conclusion: Consequently, esthetic and functional occlusal rehabilitation was achieved., Clinical Significance: Hyperdivergent Class II facial and skeletal patterns with multiple missing teeth can be effectively treated using orthodontic skeletal anchorage. In young adults, the transverse discrepancy can be resolved using MARPE, which is also useful for improving the sagittal and vertical relationships. In the case of multiple missing teeth, orthodontic treatment can provide the proper space to facilitate dental implants to achieve optimal esthetics and function., (© 2023 Wiley Periodicals LLC.)

Initial Society of Critical Care Medicine Discovery Viral Infection and Respiratory illness Universal Study (VIRUS) Registry analysis suggested that improvements in critical care processes offered the greatest modifiable opportunity to improve critically ill COVID-19 patient outcomes., Objectives: The Structured Team-based Optimal Patient-Centered Care for Virus COVID-19 ICU Collaborative was created to identify and speed implementation of best evidence based COVID-19 practices., Design Setting and Participants: This 6-month project included volunteer interprofessional teams from VIRUS Registry sites, who received online training on the Checklist for Early Recognition and Treatment of Acute Illness and iNjury approach, a structured and systematic method for delivering evidence based critical care. Collaborators participated in weekly 1-hour videoconference sessions on high impact topics, monthly quality improvement (QI) coaching sessions, and received extensive additional resources for asynchronous learning., Main Outcomes and Measures: Outcomes included learner engagement, satisfaction, and number of QI projects initiated by participating teams., Results: Eleven of 13 initial sites participated in the Collaborative from March 2, 2021, to September 29, 2021. A total of 67 learners participated in the Collaborative, including 23 nurses, 22 physicians, 10 pharmacists, nine respiratory therapists, and three nonclinicians. Site attendance among the 11 sites in the 25 videoconference sessions ranged between 82% and 100%, with three sites providing at least one team member for 100% of sessions. The majority reported that topics matched their scope of practice (69%) and would highly recommend the program to colleagues (77%). A total of nine QI projects were initiated across three clinical domains and focused on improving adherence to established critical care practice bundles, reducing nosocomial complications, and strengthening patient- and family-centered care in the ICU. Major factors impacting successful Collaborative engagement included an engaged interprofessional team; an established culture of engagement; opportunities to benchmark performance and accelerate institutional innovation, networking, and acclaim; and ready access to data that could be leveraged for QI purposes., Conclusions and Relevance: Use of a virtual platform to establish a learning collaborative to accelerate the identification, dissemination, and implementation of critical care best practices for COVID-19 is feasible. Our experience offers important lessons for future collaborative efforts focused on improving ICU processes of care., Competing Interests: Drs. Kashyap and Gajic have a financial conflict of interest with software platforms licensed to Ambient Clinical Analytics associated with the Checklist for Early Recognition and Treatment of Acute Illness and iNjury program. This software was not utilized for this project, and these individuals did not participate in analysis or interpretation of these study results. The remaining authors have disclosed that they do not have any potential conflicts of interest., (Copyright © 2023 The Authors. Published by Wolters Kluwer Health, Inc. on behalf of the Society of Critical Care Medicine.)

The aim of this study was to determine the factors that affect esthetic preference regarding the perceived facial attractiveness of young Korean female adults with a normal skeletal pattern using cone-beam computed tomography (CBCT). After reorienting the CBCT images of 40 young Korean female adults, three-dimensional (3D) measurements were analyzed, and five 3D facial images were digitally constructed. A computer-based questionnaire was used to determine perceived facial attractiveness by scoring from 1 (very unattractive) to 10 (very attractive). Esthetic perception and the most influential facial view and component were examined and compared by orthodontists, general dentists, and laypeople to evaluate facial attractiveness. Compared to the unattractive group, the attractive group had significantly greater values for Pog-NB, L1SI-FH, U lip thickness, L lip-U lip, and Nasolabial angle, along with significantly lower values for U1SI-FH and Cant of U lip; the attractive group also had a more retruded U1MP (p < 0.01), L1MP (p < 0.01), U lip (p < 0.05), and L lip (p < 0.01) relative to N, as well as a more retruded U lip (p < 0.05) and L lip (p <0.001) relative to esthetic lines. Orthodontists and general dentists were more likely to consider the profile view. When evaluating facial attractiveness, orthodontists and laypeople more often focused on the lips and chin. When evaluating facial attractiveness, all evaluators showed a high esthetic preference for retroclination and retrusion of the incisors and lips, but there were some differences in how they perceived facial attractiveness. Therefore, the ultimate perception of facial attractiveness needs to be based on the esthetic perceptions of laypeople.

Introduction: Skeletal Class II division 1 malocclusions with a retrognathic mandible can be treated with Twin Block and fixed orthodontic appliances in growing adolescent patients., Objective: The aim of this case report was to show successful treatment results following step-by-step procedures determined by visualizing the changes of the temporomandibular joint (TMJ) area using cone-beam computed tomography (CBCT) images., Case Report: A 10-year, 8-month-old female adolescent with skeletal Class II division 1 (ANB, 6.2°), severe overjet (8.4 mm), and overbite (7.8 mm) was treated with Twin Block and fixed orthodontic appliances. After wearing an active plate for 4 months, a Twin Block appliance for 9 months, a retainer with an inclined plane for 13 months, and fixed orthodontic treatment for 17 months, her skeletal Class II was corrected. After 39 months of posttreatment retention, good treatment results were maintained with favorable occlusion and facial balance. Acceptable 3-dimensional changes of the TMJ area were identified using cone-beam computed tomography images., Conclusion: A female adolescent patient with skeletal Class II division 1 malocclusion, severe overjet and overbite, and mandibular retrusion was treated using Twin Block and fixed orthodontic appliances. Acceptable 3-dimensional changes in the TMJ area and 2-dimensional growth of the mandible were identified using CBCT and cephalometric images.

Introduction: This study aimed to evaluate the posterior available space (PAS) in both dental arches of adult patients with varying skeletal patterns using cone-beam computed tomography., Methods: A sample of 114 adult patients (56 males and 58 females) was divided into 3 groups according to ANB angle and facial height ratio. Using C-mode cone-beam computed tomography images from these patients, maxillary PAS (MxPAS) and mandibular PAS (MnPAS) were measured in the distobuccal and palatal roots of the maxillary second molars and the distal roots of the mandibular second molars, respectively. The planes perpendicular to the tooth axes of the second molars in the coronal views and parallel to the posterior occlusal planes in the sagittal views were set at 3 heights of furcation, middle, and apex of the roots. For each plane, the shortest posterior distances from the roots to the inner and outer cortices were measured parallel to the furcation line connecting the furcations of the molars in the axial views. Posterior cortical bone thickness, defined as the distance from the inner cortex to the outer cortex, was measured., Results: PAS was significantly greater in males than in females and in the maxilla than in the mandible (P <0.01). All MxPAS gradually increased from the furcation to the apex with significance (P <0.05), but there was no difference in MnPAS. MxPAS was significantly greater (P <0.05) in subjects with Class II and III malocclusion than subjects with Class I malocclusion, whereas MnPAS showed no difference. MxPAS showed no significant differences in facial height ratio, whereas MnPAS was significantly greater (P <0.05) at furcation in normovergent subjects than in others. Posterior cortical bone thickness was greater (P <0.001) in the mandible than in the maxilla., Conclusions: PAS was different according to sex and skeletal patterns. It would be helpful to evaluate PAS when distalizing the molars in either arch., (Copyright © 2022 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Introduction: The purpose of this study was to analyze and clarify tooth movement when intruding the maxillary molars using intrusive forces between the maxillary first and second molars., Methods: A finite element method was used to simulate the long-term orthodontic movement of the maxillary dentition by accumulating the initial displacement of teeth produced by elastic deformation of the periodontal ligament. Intrusive forces of 2 N were applied buccally to the archwire between the maxillary first and second molars. Two different sized transpalatal arches (TPAs) (0.036-in and 0.06-in) and a gradually increased constriction bend and torque toward the posterior teeth were applied to prevent buccal tipping of the posterior teeth when intruding the maxillary posterior teeth., Results: The whole maxillary dentition rotated clockwise as the intrusive force passed posteriorly to the center of resistance. Buccal crown tipping of the maxillary posterior teeth and lingual tipping of the maxillary incisors occurred. Their tipping decreased with a constriction bend and lingual crown torque and when a TPA was applied., Conclusions: Supplemental procedures such as a constriction bend and lingual crown torque and a TPA could effectively prevent the buccal crown tipping of the maxillary posterior teeth when intruding on them., (Copyright © 2021 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Introduction: This study aimed to investigate the short-term effects on the circummaxillary sutures induced by microimplant-assisted rapid palatal expansion (MARPE) in skeletally mature patients., Methods: Cone-beam computed tomography (CBCT) images of preexpansion (T0) and postexpansion (T1) of 23 patients (mean age, 20.9 ± 3.65 years) treated with MARPE were evaluated. The T0 and T1 CBCT images were reoriented and superimposed on the basis of the anterior cranial base, using OnDemand3D software (Cybermed, Seoul, Korea). Then, width changes of 9 circummaxillary sutures (frontonasal, frontomaxillary, frontozygomatic, nasomaxillary, zygomaticomaxillary, intermaxillary, midpalatal, zygomaticotemporal, and pterygopalatine sutures) were measured on 1 section of each patient's T0 and T1 CBCT images. In addition, correlation coefficients between changes in the midpalatal sutures, the amount of appliance activation, age, and the changes in other circummaxillary sutural widths were also calculated., Results: Statistically significant (P <0.05) width increases were found in all 9 circummaxillary sutures. The changes in midpalatal suture at the maxillary central incisor level positively correlated with the intermaxillary sutures at the anterior nasal spine level, midpalatal sutures at the posterior nasal spine level, and frontomaxillary sutures (P <0.05). In addition, the changes in the midpalatal sutures at the posterior nasal spine level also positively correlated with the changes in the intermaxillary sutures at the anterior nasal spine level, frontomaxillary sutures, and medial pterygopalatine sutures (P <0.05)., Conclusions: All 9 circummaxillary sutural widths increased in skeletally mature patients immediately after MARPE. The greatest increases in width were measured in the midpalatal sutures and the intermaxillary sutures, followed by the frontomaxillary sutures., (Copyright © 2021. Published by Elsevier Inc.)

Objective: The aim of this study was to compare the craniomaxillofacial changes when using high-pull J-hook headgear (HPJH) and mini-implants (MIs) as maxillary anchorage in adolescents., Study Design: 40 female adolescents with dentoalvolar protrusion were divided into 2 groups; the HPJH group (n=20) and the MI group (n=20). Lateral cephalograms taken before treatment (T0) and after anterior tooth retraction (T1) were superimposed on the stable structures and then craniomaxillofacial changes were evaluated., Results: The cranial base angle, SNB, and facial angle decreased in the HPJH group but increased in the MI group. ANB decreased more in the MI group than in the HPJH group. Mandibular plane angle increased in the HPJH group but decreased in the MI group. Facial height index increased in the MI group while it showed no change in the HPJH group. Mandibular true rotation occurred clockwise in the HPJH group and counterclockwise in the MI group. Maxillary central incisors were intruded and retracted more in the MI group than in the HPJH group. Maxillary first molars were extruded in the HPJH group and were intruded in the MI group. Maxillary first molars were protracted more in the HPJH group than in the MI group. Mandibular central incisors were retracted more in the HPJH group than the MI group. Mandibular first molars were extruded more in the MI group than in the HPJH group., Conclusion: More favorable craniomaxillofacial changes occurred in the MI group than in the HPJH group.

The purpose of this study was to evaluate midpalatal bone density (BD) by using cone-beam computed tomography (CBCT) according to gender, age, and vertical and horizontal skeletal patterns. CBCT images from 126 subjects (64 females and 62 males) were reoriented and analyzed in order to attain BD values at the midpalatal suture. Four age groups were used for classification (adolescence, 10 ≤ early < 14 years, 14 ≤ middle ≤ 17 years, and 17 < late ≤ 21 years; adult > 21 years). Vertical skeletal pattern categories were differentiated by the Frankfort horizontal line to mandibular plane angle (hypodivergent < 22°, 22° ≤ normovergent ≤ 28°, and 28° < hyperdivergent). Horizontal skeletal pattern differentiation was defined by ANB angle (Class III < 0°, 0° ≤ Class I ≤ 4°, and 4° < Class II). Females showed significantly higher BD than males ( p < 0.001). As age increased, BD increased significantly ( p < 0.001). There were no significant differences between vertical skeletal patterns. Class II showed significantly less BD than Class III ( p < 0.05). With this information, clinicians can better understand BD trends of the midpalatal suture and, thus, better understand our patient's anatomy and potential hurdles in successful treatment.

Escape Rooms are gaining prominence as education modalities; the use of principles of game design have been shown to augment knowledge acquisition in a fun, team-based learning experience ("edutainment"). In this report, we outline some of the medical literature and then provide our step-by-step approach and lessons learned when building what was, to our knowledge, the first continuing medical education Escape Room at a national scientific meeting. We then comment on how this innovative educational offering was reimagined the following year for remote (virtual) learning because of the COVID-19 pandemic., (Published by Elsevier Inc.)

Introduction: This study aimed to identify the tooth movement patterns relative to various force angulations (FAs) when distalizing the total maxillary dentition., Methods: Long-term orthodontic movement of the maxillary dentition was simulated by accumulating the initial displacement of teeth produced by elastic deflection of the periodontal ligament using a finite element analysis. Distalization forces of 3 N were applied to the archwire between the maxillary canine and first premolar at 5 different FAs (-30°, -15°, 0°, 15°, and 30°) to the occlusal plane., Results: Maxillary incisors and molars showed lingual and distal tipping at all FAs, respectively. At a force angulation of 30°, almost bodily distalization of the total maxillary dentition occurred, but incisors showed considerable lingual tipping because of the effect of clearance gap (0.003-in, 0.022 × 0.025-in bracket slot, 0.019 × 0.025-in archwire) and elastic deflection of the archwire. Medial displacement of the maxillary anterior teeth occurred because of lingual tipping during distalization. The occlusal plane rotated clockwise at all FAs because of extrusion of the maxillary incisors and intrusion of the maxillary second molars, and the amounts decreased as FA increased., Conclusions: Tooth movement patterns during distalization of the total maxillary dentition were recognized. With an understanding of the mechanics, a proper treatment plan can be established., (Copyright © 2021 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

A 13-year-old growing female patient presented with hemimandibular hyperplasia of the right side, Class III hypodivergent skeletal pattern, and severe facial asymmetry. Corrective surgery was deferred until her growth had been completed. When the patient was 16 years old, a low condylectomy was performed on the hyperplastic side of her mandible to prevent its progressive condylar hyperplasia, while simultaneous orthodontic camouflage treatment was performed with the intrusion of the maxillary right posterior teeth using temporary skeletal anchorage devices without additional orthognathic surgery. A low condylectomy caused anterior and lateral open bite after the downward and backward movement of the chin, which improved Class III appearance. The intrusion of the maxillary right posterior teeth followed by compensating extrusion of the mandibular posterior teeth contributed to improve the patient's facial asymmetry with correction of the transverse occlusal plane and lip canting. After 30 months of treatment, an acceptable esthetic outcome and functional occlusion were achieved. The treatment results were well maintained for 1-year retention., (Copyright © 2021 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Introduction: The purpose of this study was to analyze and clarify tooth movement during mesialization of the whole maxillary dentition with various force angulations (FAs)., Methods: A finite element method was used to simulate the long-term orthodontic movement of the maxillary dentition by accumulating the initial displacement of teeth produced by elastic deformation of the periodontal ligament. A mesial force of 3 N was applied to the maxillary second molar at 5 different FAs (-30°, -15°, 0°, 15°, and 30°) to the occlusal plane., Results: At an FA of 28°, the line of action of the force passed through the center of resistance of the maxillary whole dentition. With all FAs, the central incisors and molars tipped labially and mesially, respectively. The tipping angles gradually decreased as the FAs shifted from -30° to 30°. The molars tipped lingually with FAs of -30° and -15°, whereas they tipped buccally with FAs of 0°, 15°, and 30°. The molars tended to rotate mesiolingually more as the angle of force increased toward an FA of 30°. The occlusal plane rotated counterclockwise with FAs of -30°, -15°, and 0°, whereas it rotated clockwise with FAs of 15° and 30°. With an FA of 30°, buccal tipping and mesiolingual rotation of the molars, and the change in the occlusal plane angle decreased when the transpalatal arch (TPA) was fixed to the first molars and decreased, even more when the TPA was fixed to the second molars rather than the first molars, when a thicker TPA was used, and when the TPA was fixed to both molars rather than a single molar., Conclusions: There was a correlation between tooth movement during mesialization of the whole maxillary dentition and the angle at which the force was applied., (Copyright © 2021 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Introduction: The objectives of this study were to evaluate the effects of bicortical engagement by microimplants with maxillary skeletal expanders on pterygopalatine sutures opening and to analyze the postexpansion skeletal changes associated with it., Methods: Eighteen subjects treated with maxillary skeletal expanders were examined for pterygopalatine suture openings. Eight subjects who showed no evidence of the suture opening were assigned to the nonsplit group (NG), whereas 10 subjects with opened sutures were assigned to the split group (SG). Preexpansion and postexpansion cone-beam computed tomography images were superimposed for each group, and the changes in the 2 groups were compared. Finally, cone-beam computed tomography volumes were reoriented along the axis of each microimplant to check the bicortical engagement of the 4 microimplants., Results: There was a significant correlation between the bicortical engagement of the orthodontic microimplants and the pterygopalatine suture opening (P = 0.0003). In the NG, the average amount of transverse expansion measured at the center of resistance of the maxillary first molars, anterior nasal spine, and posterior nasal spine (PNS) was 4.33 mm, 2.22 mm, and 1.58 mm, respectively, whereas the transverse expansion in the SG was 5.29 mm, 2.21 mm, and 2.46 mm, respectively. The magnitude of transverse expansion at PNS was significantly higher in the SG than in the NG (P = 0.036). The PNS also showed a significant anterior displacement in the SG (0.89 mm) compared with the NG (0.06 mm) (P = 0.033)., Conclusions: Bicortical microimplant anchorage is essential for pterygopalatine suture opening in microimplant-assisted maxillary skeletal expansion, which may result in further skeletal expansion and forward movement in the posterior part of the palatomaxillary complex., (Copyright © 2020 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objective: To systematically review the effects of cortical bone thickness (CBT) and bone mass density (BMD) on miniscrew success rates., Methods: MEDLINE, the Cochrane Library and Scopus were searched up to June 2020. Of a total of 5734 articles, seven studies were finally selected for the review., Results: The overall mean success rate weighted by the number of miniscrews was 87.21% (89.87% in the maxilla and 79.24% in the mandible). There was a significantly higher success rate for miniscrews placed in the maxilla compared with those in the mandible (P < .05). CBT showed small positive effect on the success rate of the miniscrews although it failed to reach a statistical significance. The cortical BMD had a minimal effect on the success of the miniscrews. The cancellous BMD demonstrated a very strong effect on the success of the miniscrews in the maxilla, whereas it showed a moderately negative effect in the mandible., Limitations: Because of the small number and clinical heterogeneity of the included studies, the results should be interpreted with caution. Further randomized clinical studies with a large sample size are recommended., (© 2020 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objective: The aim of this retrospective study was to evaluate the bone density (BD) at the mandibular symphysis according to horizontal and vertical patterns using cone-beam computed tomography (CBCT)., Setting and Sampling: Three hundred nineteen untreated adults with a mean age of 24 years., Materials and Methods: CBCT images were converted into the lateral cephalometric images, and tracings were performed for categorizing the patients based on skeletal features. Cortical BDs at B point, pogonion (Pog), genion (Ge) and menton (Me), and cancellous BDs of the mandibular symphysis were measured using CBCT images. Statistical analyses were performed to evaluate the effects of horizontal and vertical skeletal patterns on BDs., Results: Females exhibited higher BD than males at the Me, Pog, Ge (P < .001). Hyperdivergent skeletal pattern showed significantly higher cortical BD than normovergent and hypodivergent skeletal patterns at Me (P < .001). Normovergent skeletal pattern showed significantly higher cortical BD than hypodivergent skeletal patterns at Me (P = .001). Class II skeletal pattern showed significantly higher cortical BD than Class I and III skeletal patterns at Me (P < .001) and Ge (P < .05). Class I skeletal pattern showed significantly higher mean cortical BD than Class III skeletal pattern at B point (P = .025). Cancellous BD was higher in Class III and hypodivergent skeletal patterns than others but showed no statistical significance., Conclusions: Significant differences were identified across various skeletal patterns. Several mandibular symphyseal landmarks showed statistically significant differences in BD at Me, B point and Ge, with Me having the most statistically significant findings., (© 2020 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objective: The objective of this retrospective study was to investigate the relationship between mandibular symphysis bone density (BD) and mandibular growth direction in adolescent patients by facilitating the measurement of cortical and cancellous BDs at the mandibular symphysis using cone beam computed tomography (CBCT)., Study Design: 224 adolescent patients (98 males and 126 females) were categorized by sex, age, and mandibular growth direction. Cortical and cancellous BDs were measured along with a sagittal slice at multiple locations., Results: Females exhibited higher cortical BD than males at menton (Me, P =0.002). Patients with a posterior growth direction exhibited a higher cortical BD than those with anterior and normal growth direction at Me (P <0.021, P <0.001, respectively), pogonion (Pog, P =0.037, P =0.037, respectively) and genion (Ge, P =0.007, P =0.008, respectively). Patients with a posterior growth direction exhibited a higher cortical BD than those with anterior growth direction at B point (P =0.009)., Conclusions: Significant differences in BD were identified across anthropometric categories. These findings may be useful in determining mandibular growth direction in adolescents.

Objective: To investigate the cephalometric changes following anterior repositioning of the mandible for predicting the treatment effects in Class II adolescent patients., Study Design: Lateral cephalograms of 28 patients (ANB > 4°) were taken in centric occlusion (CO) and edge-to-edge bite (EtoE) before orthodontic treatment. The patients were classified into two groups according to their mandibular plane angle [MPA; low MPA (LMPA) ≤ 28° and high MPA (HMPA) > 28°]. Cephalometric changes of hard and soft tissues were measured and analyzed with an x-y cranial base coordinate system., Results: For CO to EtoE, there were no significant cephalometric changes between HMPA and LMPA, but the horizontal ratio of soft to hard tissue pogonion (H-Pog'/H-Pog) change was significantly greater with LMPA than with HMPA while the vertical ratio (V-Pog'/V-Pog) showed vice versa. For CO to EtoE, MPA showed significant correlations with H-Pog'/H-Pog and V-Pog'/V-Pog. Y-axis angle, V-Pog'/V-Pog and H-Pog'/H-Pog can be used as good tools to discriminate between HMPA and LMPA., Conclusion: Cephalometric findings for CO to EtoE may be useful in predicting the vertical and horizontal changes of hard and soft tissues with the treatment of growing adolescents having various vertical skeletal patterns of Class II malocclusion.

Objective: The aim of this retrospective study was to evaluate the pre- and postsurgical bone densities at alveolar and extra-alveolar sites following twojaw orthognathic surgery., Methods: The sample consisted of 10 patients (mean age, 23.2 years; range, 18.0-27.8 years; 8 males, 2 females) who underwent two-jaw orthognathic surgery. A three-dimensional imaging program (Invivo 5) was used with multidetector computed tomography images taken preand postoperatively (obtained 32.3 ± 6.0 days before surgery and 5.8 ± 2.6 days after surgery, respectively) for the measurement of bone densities at the following sites: (1) alveolar bone in the maxilla and mandible, (2) extra-alveolar sites, such as the top of the head, menton (Me), condyle, and the fourth cervical vertebrae (C4)., Results: When pre- and postsurgical bone densities were compared, an overall tendency of decrease in bone density was noted. Statistically significant reductions were observed in the densities of cancellous bone at several areas of the maxillary alveolar bone; cortical and cancellous bone in most areas of the mandibular alveolar bone; cortical bone in Me; and cancellous bone in C4. There was no statistically significant difference in bone density in relation to the depth of the alveolar bone. In a comparison of the bone densities between groups with and without genioplasty, there was almost no statistically significant difference., Conclusions: Accelerated tooth movement following orthognathic surgery may be confirmed with reduced bone density. In addition, this study could offer insights into bone metabolism changes following orthognathic surgery, providing direction for further investigations in this field.

Many treatment options are available to address the problem of missing second premolars. Extraction of retained deciduous second molars and subsequent space closure are often appropriate because this option alleviates the need for implants or other restorations. This article describes the conventional orthodontic closure of unilateral and bilateral congenitally missing second premolar spaces after the extraction of retained deciduous second molars., (Copyright © 2019 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objectives: To evaluate the condyle-fossa relationship in adolescents with various skeletal patterns using cone-beam computed tomography (CBCT)., Materials and Methods: CBCT images obtained in 120 adolescent patients were used for this study. The patients were divided into 3 groups according to 3 criteria: (1) age (early, middle, and late adolescence); (2) facial height ratio or Jarabak quotient (hyperdivergent, normodivergent, and hypodivergent); and (3) ANB classification (Class I, Class II, and Class III). Temporomandibular joint space (TMJS: AS, anterior space; SS, superior space; PS, posterior space; MS, medial space; LS, lateral space), width and depth of the condyle (MLT, mediolateral thickness; APT, anteroposterior thickness), articular slope (ArS) and vertical height of the fossa (VHF) were measured and compared using CBCT., Results: Differences in condyle-fossa relationships were not significantly different between male and female adolescents, but were significantly different ( P < .05) between left and right sides. The mean values showed no statistical differences according to age and skeletal pattern. Most measurements in the sagittal view showed that SS was the greatest, and the mean ratio of AS to SS to PS was 1.00 to 1.27 to 1.19, respectively. The mean values of coronal MS and LS were not significantly different., Conclusions: There were almost no statistical differences in the TMJS in adolescents across various factors except between left and right sides.

Introduction: Patients with impacted maxillary canines typically endure long treatment time, and reliable pretreatment estimates of orthodontic treatment duration would be beneficial to patients and clinicians. The purpose of this study was to identify factors that affect the duration of forced eruption for impacted maxillary canines., Methods: Data from treatment records and radiographic scans of 27 patients with 29 impacted and labially displaced maxillary canines (25 unilateral, 2 bilateral) were collected. The patients underwent surgical and orthodontic interventions to bring the canine into the dental arch. Linear and angular measurements between the cusp tip and various reference planes were made on 3-dimensional images. Measurements associated with dental follicle, bone density, and canine root length were also obtained. Data were analyzed using simple linear regression and stepwise regression analysis., Results: A total of 29 treated canines moved into the arch over a period of 13.0 ± 8.3 months (range, 5-33 months). Simple regression analysis showed that the only significant factor, with duration of traction as the dependent factor, was pretreatment inclination of the canines toward the midsagittal plane; stepwise regression analysis indicated a strong direct correlation between the duration of traction and this factor. The other variables were not significantly associated with the duration of traction., Conclusions: The inclination of canines toward the midsagittal plane was found to be a reliable predictor of the duration of forced eruption for impacted maxillary canines., (Copyright © 2019 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objectives: To clarify the mechanics of tooth movement in mesialization of the whole mandibular dentition when changing the force angulation., Setting: A finite element method was used to simulate long-term movements of the whole mandibular dentition., Material and Methods: Tooth movement was simulated by accumulating the initial displacement, which was produced by elastic deformation of the periodontal ligament. Mesial forces of 3 N were applied to the second molar bracket at -30°, -15°, 0°, 15° and 30° to the occlusal plane., Results: The whole dentition and occlusal plane were rotated depending on the direction of the force with respect to the centre of resistance (CR). At a force angulation of -30°, the line of action of the force passed near the CR, and the whole dentition translated without rotation of the occlusal plane. The second molar tipped buccally due to a clearance gap between the archwire and bracket slot. When increasing a force angulation from -30°, the line of action of the force passed above the CR, and thereby, the occlusal plane rotated clockwise. This rotation of the whole dentition induced tipping of the individual teeth. Buccal tipping of the molar due to an elastic deformation of the archwire was prevented by using a lingually pre-bent archwire., Conclusions: Careful selection of force angulation and biomechanics is essential to obtain proper tooth movement in total mesialization of the mandibular dentition., (© 2019 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Introduction: The aim of this study was to investigate 3-dimensional changes of the zygomaticomaxillary complex (ZMC) after mini-implant assisted rapid maxillary expansion (MARME)., Methods: A total of 15 pairs of cone-beam computed tomography 3-dimensional images taken before expansion (T0) and after expansion (T1) were analyzed by measuring changes in the coordinates of the landmarks of the ZMC., Results: Changes in the x coordinates of the landmarks showed significant expansion (P <0.01) and greater expansion at the lower than upper portion of the ZMC (P <0.05) in the transverse dimension. All y coordinates of the landmarks except the jugal point (J) showed forward displacement (P <0.05), and the z coordinates of ANS, PNS, Alare, A, and ectocanine showed downward displacement (P <0.01) in the sagittal and vertical dimensions. Also, z coordinates of the landmarks that were closer to the midsagittal plane and in a more posterior portion of the ZMC displaced further downward (P <0.05). SNA and ANB angles increased (P <0.05 and P <0.001, respectively) and the SNB angle decreased (P <0.01). There was a significant correlation between changes in the x coordinates of the ectomolare and ectocanine and the amount of expansion measured from the center of resistance of the maxillary first molars (CR6; P <0.05). There was no significant correlation between the amount of CR6 expansion and changes in y and z coordinates of the landmarks., Conclusions: 3-Dimensional changes of the ZMC after MARME showed expansion in a pyramidal shape from the coronal view, downward and forward displacement from the sagittal view, and parallel palatal expansion from the axial view. These findings might be useful for understanding skeletal expansion patterns using MARME., (Copyright © 2019 American Association of Orthodontists. All rights reserved.)

Immune checkpoint inhibitors (ICIs) have revolutionized oncology, but are associated with immune-related adverse events. Clinically, pneumonitis is a well-recognized complication, but its histopathologic features are poorly understood. Institutional archives were searched for patients having ICI therapy and subsequent lung tissue sampling. After excluding infectious cases, 9 patients (5 women, median: 59 y) were identified with clinically suspected ICI-related pneumonitis. Clinical history, imaging, and pathology slides were reviewed. Patients received pembrolizumab (6 cases), nivolumab (1), ipilimumab followed by pembrolizumab (1), or pembrolizumab followed by nivolumab (1); the latter experienced pneumonitis with both agents. Treatment duration ranged from 1 to 33 cycles (median: 8). Three patients received concurrent chemotherapy and 1 received radiation; the remainder received ICI monotherapy. Symptoms were nonspecific; 2 patients were asymptomatic. Thoracic imaging showed bilateral ground glass or nodular opacities in all cases, often with pleural effusion. Histologically, organizing pneumonia was seen in 7 patients, all with subclinical or mild disease, admixed with vague non-necrotizing airspace granulomas in 3 cases; all 6 patients with follow-up did well. One patient had acute fibrinous pneumonitis and 1 had diffuse alveolar damage; both died. All 9 cases showed foamy macrophages and pneumocyte vacuolization; 6 had rare eosinophils. ICI-related pneumonitis presents as bilateral ground-glass opacities or nodules, and usually manifests as organizing pneumonia histopathologically, often with vague non-necrotizing airspace granulomas. Foamy macrophages and pneumocyte vacuolization are characteristic and rare eosinophils are often seen. Less commonly, acute fibrinous pneumonitis or diffuse alveolar damage can occur, which may be fatal.

Objective: The aim of this finite element study was to clarify the mechanics of tooth movement in palatal en-masse retraction of segmented maxillary anterior teeth by using anchor screws and lever arms., Methods: A three-dimensional finite element method was used to simulate overall orthodontic tooth movements. The line of action of the force was varied by changing both the lever arm height and anchor screw position., Results: When the line of action of the force passed through the center of resistance (CR), the anterior teeth showed translation. However, when the line of action was not perpendicular to the long axis of the anterior teeth, the anterior teeth moved bodily with an unexpected intrusion even though the force was transmitted horizontally. To move the anterior teeth bodily without intrusion and extrusion, a downward force passing through the CR was necessary. When the line of action of the force passed apical to the CR, the anterior teeth tipped counterclockwise during retraction, and when the line of action of the force passed coronal to the CR, the anterior teeth tipped clockwise during retraction., Conclusions: The movement pattern of the anterior teeth changed depending on the combination of lever arm height and anchor screw position. However, this pattern may be unpredictable in clinical settings because the movement direction is not always equal to the force direction., Competing Interests: CONFLICTS OF INTEREST: No potential conflict of interest relevant to this article was reported.

Inflammatory bowel disease (IBD), including ulcerative colitis (UC) and Crohn's disease, is a group of chronic and relapsing inflammatory conditions within the gastrointestinal tract. An increase in intestinal epithelial cell (IEC) apoptosis is a major characteristic of UC. Tumor necrosis factor-α (TNF-α) plays an essential role in the regulation of apoptosis. Aberrant activation of the immune response to resident microflora contributes to overproduction of TNF-α in the mucosal tissue of the gastrointestinal tract; a hallmark of UC. There are no curative medications for IBD. Thus, establishment of novel strategies for the treatment of this disease is imperative. Lactic acid bacteria (LAB) have been characterized as probiotics that can alleviate imbalances in indigenous microflora in UC, exhibiting beneficial effects for the treatment and prevention of IBD. In this study, we elucidate the potential of LB-9, a novel probiotic LAB, to protect against colitis development using a dextran sodium sulfate (DSS)-induced mouse model of UC. Treatment using LB-9 reduced clinical symptoms of colitis. In addition, both colitis-induced and NF-κB-mediated IEC apoptosis was markedly reduced in mice treated with LB-9. Moreover, these results were closely associated with reduced TNF-α levels. Our study demonstrates that the LB-9 probiotic exhibits therapeutic potential for UC through suppression of TNF-α-mediated IEC apoptosis in a murine DSS-induced colitis model, with important biological implications for treatment of IBD in humans.

Introduction: The aim of this finite element study was to analyze and clarify the mechanics of tooth movement patterns for total distalization of the mandibular dentition based on force angulation., Methods: Long-term orthodontic movement of the mandibular dentition was simulated by accumulating the initial displacement of teeth produced by elastic deformation of the periodontal ligament., Results: Displacement of each tooth was caused by movement of the whole dentition, elastic deflection of the archwire, and clearance gap between the archwire and bracket slot. The whole dentition was rotated clockwise or counterclockwise when the line of action of the force passed below or above the center of resistance. Elastic deflection of the archwire induced a lingual tipping of the anterior teeth. It became larger when increasing the magnitude of angulation. The archwire could be rotated within the clearance gap between the archwire and the bracket slot, and thereby the teeth tipped., Conclusions: Mechanics of total mandibular distalization was clarified. Selective use of force angulation with a careful biomechanical understanding can achieve proper distalization of the whole mandibular dentition., (Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Treatment of horizontally and deeply impacted mandibular molars is challenging for both orthodontists and oral surgeons because of the limited access and anchorage control. We report on two patients who had horizontally and mesially impacted mandibular second molars (MM2s). Both patients were treated by a surgical orthodontic approach, and the crowns of the impacted teeth were brought into the arches by closed forced eruption. Mesially impacted MM2s were uprighted with orthodontic microimplants, inserted in the retromolar area, and then moved into their ideal position. The first patient was in an active growing stage, while the second patient was beyond the active growing stage. Therefore posterior available space (PAS) should be analyzed before treatment of impacted MM2s to prevent periodontal problems after uprighting of impacted teeth. If PAS is not enough for uprighting impacted MM2s, alternative treatment should be considered based on the stage of growth.

Inflammatory bowel disease, including Crohn's disease and ulcerative colitis (UC), is a chronically relapsing inflammatory disorder of the gastrointestinal tract. Intestinal epithelial cells (IECs) constitute barrier surfaces and play a critical role in maintaining gut health. Dysregulated immune responses and destruction of IECs disrupt intestinal balance. Dextran sodium sulfate (DSS) is the most widely used chemical for inducing colitis in animals, and its treatment induces colonic inflammation, acute diarrhea, and shortening of the intestine, with clinical and histological similarity to human UC. Current treatments for this inflammatory disorder have poor tolerability and insufficient therapeutic efficacy, and thus, alternative therapeutic approaches are required. Recently, dietary supplements with probiotics have emerged as promising interventions by alleviating disturbances in the indigenous microflora in UC. Thus, we hypothesized that the probiotic Bifidobacterium animalis subsp. lactis strain BB12 could protect against the development of colitis in a DSS-induced mouse model of UC. In the present study, oral administration of BB12 markedly ameliorated DSS-induced colitis, accompanied by reduced tumor necrosis factor-α-mediated IEC apoptosis. These findings indicate that the probiotic strain BB12 can alleviate DSS-induced colitis and suggest a novel mechanism of communication between probiotic microorganisms and intestinal epithelia, which increases intestinal cell survival by modulating pro-apoptotic cytokine expression.

Introduction: The aim of this study was to evaluate the bone density of mandibular condyles in adolescents with varying skeletal patterns using cone-beam computed tomography. The null hypothesis was that there is no difference in the bone density of mandibular condyles in adolescents across various facial height ratios, ANB angle classifications, sexes, and age categories., Methods: We divided 120 adolescent patients, 56 boys and 64 girls, into 3 groups according to 3 criteria: (1) age (early, 10 to <14 years; middle, 14 to <17 years; late, 17 to <20 years); (2) facial height ratio or Jarabak quotient (hyperdivergent: facial height ratio, <62%; normovergent: facial height ratio, 62% to ≤65%; and hypodivergent: facial height ratio, >65%); and (3) ANB angle classification (Class I, 1° to ≤4°; Class II, (>4°); and Class III, <1°). The total, cortical, and cancellous bone densities were measured and compared on the axial slice with the largest mediolateral diameter of the mandibular condyle using C-mode cone-beam computed tomography., Results: Cortical bone density increased as age increased and showed statistically significant differences between the early and middle (P = 0.041) and the early and late adolescent groups (P = 0.031). Condylar bone density increased as facial height ratio decreased, and cancellous bone density showed statistically significant differences between the hyperdivergent and hypodivergent groups (P = 0.038). The cortical, cancellous, and total bone densities increased as ANB angle increased and showed statistically significant differences between the Class II and Class III groups (P = 0.022, P = 0.006, and P = 0.003, respectively)., Conclusions: The null hypothesis was rejected. Condylar bone density increased as facial height ratio decreased and ANB angle increased. These findings may be useful in predicting the vertical and horizontal skeletal growth patterns of growing adolescents., (Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Introduction: The 2-fold purpose of this study was to evaluate the effects of acid etching and calcium chloride immersion on removal torque and the bone-cutting ability of orthodontic mini-implants (OMIs)., Methods: For the removal torque part of the study, 3 types of OMIs (titanium alloy) were evaluated in a rabbit model: OMIs with acid surface etching with and without calcium chloride immersion (ECG and EG, respectively) and a control group (CG), in which the OMIs had an untreated, machined surface. We inserted 126 OMIs (42 OMIs per type) into both tibias of 21 male rabbits (5 months of age) with body weights of 3.0 to 3.5 kg. Removal torque was evaluated after 1, 4, and 7 weeks. To determine the OMIs' bone-cutting ability, total insertion time to place an OMI 6 mm into artificial bone was measured (6 OMIs per group)., Results: Removal torque values for the EG (3.97 ± 0.52 Ncm) and ECG (4.21 ± 0.44 Ncm) were statistically and significantly higher than those of the CG (3.02 ± 0.53 Ncm) 1 week after implantation (P <0.05). The ECG (6.54 ± 0.50, 6.61 ± 0.66 Ncm) showed the highest removal torque value followed by the EG (5.68 ± 0.58, 5.89 ± 0.70 Ncm) and CG (3.43 ± 0.62, 3.38 ± 0.54 Ncm) at 4 and 7 weeks after implantation (P <0.05). Removal torque did not change over time with the CG, but with the ECG and EG, it was significantly higher in weeks 4 and 7 than in week 1 (P <0.05). Total insertion time was significantly greater for the EG than for the ECG and CG (P <0.05)., Conclusions: Treating OMIs with a calcium chloride solution improved the initial bone reaction by preventing contamination of the implant surface, and increasing the surface roughness of OMIs by acid etching enhanced their stability without decreasing the bone-cutting ability compared with OMIs without surface treatment., (Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Microstructural evolution and wear performance of Tantalum (Ta) treated by ultrasonic nanocrystalline surface modification (UNSM) at 25 and 1000 °C were reported. The UNSM treatment modified a surface along with subsurface layer with a thickness in the range of 20 to 150 µm, which depends on the UNSM treatment temperature, via the surface severe plastic deformation (S²PD) method. The cross-sectional microstructure of the specimens was observed by electron backscattered diffraction (EBSD) in order to confirm the microstructural alteration in terms of effective depth and refined grain size. The surface hardness measurement results, including depth profile, revealed that the hardness of the UNSM-treated specimens at both temperatures was increased in comparison with those of the untreated ones. The increase in UNSM treatment temperature led to a further increase in hardness. Moreover, both the UNSM-treated specimens with an increased hardness resulted in a higher resistance to wear in comparison with those of the untreated ones under dry conditions. The increase in hardness and induced compressive residual stress that depend on the formation of severe plastically deformed layer with the refined nano-grains are responsible for the enhancement in wear resistance. The findings of this study may be implemented in response to various industries that are related to strength improvement and wear enhancement issues of Ta., Competing Interests: The authors declare no conflict of interest.

Objectives: To estimate the optimal bending angles in the running loop for mesial translation of a mandibular second molar using indirect skeletal anchorage and to clarify the mechanics of tipping and rotating the molar., Methods: A three-dimensional finite element model was developed for predicting tooth movement, and a mechanical model based on the beam theory was constructed for clarifying the force systems., Results: When using a running loop without bends, the molar tipped mesially 14.4° and lingually 0.6°, rotated counterclockwise 4.1°, and the incisors retracted 0.02 mm and intruded 0.05 mm. These angles were about the same as those estimated by the beam theory. When the amount of tip back and toe-in angles was 11.0°, mesial translation of the molar was achieved, and incisors retracted 0.10 mm and intruded 0.30 mm., Conclusions: Mesial translation of a mandibular second molar without any significant movement of anterior teeth was achieved during protraction by controlling the tip back and toe-in angles and enhancing anterior anchorage with the combined use of a running loop and indirect skeletal anchorage., (© 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objective: The purpose of this study was to investigate factors influencing the success rate of orthodontic microimplants (OMIs) using panoramic radiographs (PRs)., Methods: We examined 160 OMIs inserted bilaterally in the maxillary buccal alveolar bone between the second premolars and first molars of 80 patients (51 women, 29 men; mean age, 18.0 ± 6.1 years) undergoing treatment for malocclusion. The angulation and position of OMIs, as well as other parameters, were measured on PRs. The correlation between each measurement and the OMI success rate was then evaluated., Results: The overall success rate was 85.0% (136/160). Age was found to be a significant predictor of implant success ( p < 0.05), while sex, side of placement, extraction, and position of the OMI tip were not significant predictors ( p > 0.05). The highest success rate was observed for OMIs with tips positioned on the interradicular midline (IRML; central position). Univariate analyses revealed that the OMI success rate significantly increased with an increase in the OMI length and placement height of OMI ( p = 0.001). However, in simultaneous analyses, only length remained significant ( p = 0.027). Root proximity, distance between the OMI tip and IRML, interradicular distance, alveolar crest width, distance between the OMI head and IRML, and placement angle were not factors for success. Correlations between the placement angle and all other measurements except root proximity were statistically significant ( p < 0.05)., Conclusions: Our findings suggest that OMIs positioned more apically with a lesser angulation, as observed on PRs, exhibit high success rates., Competing Interests: The authors report no commercial, proprietary, or financial interest in the products or companies described in this article.

Objective: The purpose of this study was to predict the optimal bending angles of a running loop for bodily protraction of the mandibular first molars and to clarify the mechanics of molar tipping and rotation., Methods: A three-dimensional finite element model was developed for predicting tooth movement, and a mechanical model based on the beam theory was constructed for clarifying force systems., Results: When a running loop without bends was used, the molar tipped mesially by 9.6° and rotated counterclockwise by 5.4°. These angles were almost similar to those predicted by the beam theory. When the amount of tip-back and toe-in angles were 11.5° and 9.9°, respectively, bodily movement of the molar was achieved. When the bend angles were increased to 14.2° and 18.7°, the molar tipped distally by 4.9° and rotated clockwise by 1.5°., Conclusions: Bodily movement of a mandibular first molar was achieved during protraction by controlling the tip-back and toe-in angles with the use of a running loop. The beam theory was effective for understanding the mechanics of molar tipping and rotation, as well as for predicting the optimal bending angles., Competing Interests: The authors report no commercial, proprietary, or financial interest in the products or companies described in this article.

Introduction: The purpose of this 2-arm parallel trial was to assess the effects of pulsed electromagnetic field (PEMF) on the reduction of pain caused by initial orthodontic tooth movement., Methods: Thirty-three female patients (mean age, 16.8 ± 3.8 years) who began orthodontic treatment using fixed appliances were examined. In the pilot study, male patients were less likely to use the PEMF device (epatchQ; Speed Dental, Seoul, Korea) and answer a survey consistently, so eligibility criteria were female patients who were periodontally and systemically healthy at the initiation of treatment and had no history of dental pain in the prior 2 weeks or who used no medications (anti-inflammatory or analgesic drugs) during the experiment period. Each patient had brackets bonded on the maxillary teeth, and a 0.014-in nickel-titanium archwire was tied with elastomeric rings. Their maxillary arches were randomly divided into left and right sides in a split-mouth design: a normal PEMF device (experimental group) was used on 1 side, and a PEMF device with an inversely inserted battery (placebo group) was used on the opposite side of the arch for 7 hours on 3 consecutive nights. A Google survey link was sent to the patients' mobile phones via text message, and they were instructed to record their current pain on the survey. The survey was sent a total of 6 times after insertion of the initial archwire at 0 (T0), 2 (T1), 6 (T2), 24 (T3), 48 (T4), and 72 (T5) hours. Patients recorded the degree of pain in resting and clenching states using a numeric rating scale (NRS) from 1 (no pain) to 10 (worst pain). PEMF devices were used after T2. Generalized linear mixed models, along with ancillary pairwise analyses, were used to model and evaluate the differences in pain reported over 72 hours., Results: The NRS scores did not differ across the groups during the before-PEMF phase for resting (mean difference, -0.07; 95% confidence interval [CI], -0.73 to 0.59; P = 0.842) and clenching (mean difference, -0.28; 95% CI, -1.11 to 0.56, P = 0.513). During the after-PEMF phase, NRS scores in the experimental group were significantly lower than those in the placebo group during both resting (mean difference, -1.46; 95% CI, -2.06 to -0.85; P = <0.001) and clenching (mean difference, -1.88; 95% CI, -2.74 to -1.02, P = <0.001). The NRS scores did not differ across the groups during the before-PEMF phase for either state but were significantly lower in the experimental group than in the placebo group at T3, T4, and T5 (P <0.01). The average NRS score in the clenching state was significantly greater than in the resting state., Conclusions: PEMF was effective in reducing orthodontic pain caused by initial archwire placement., Registration: The trial was not registered., Protocol: The protocol was not published before trial commencement., (Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Posterior and Class III elastics were used to correct lateral open bite and anterior crossbite in a 29-year-old man. His occlusion, smile esthetics, and soft tissue profile were significantly improved after 25 months of active orthodontic treatment combined with 4 anterior restorations., (Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Treatment of palatally impacted and transposed canines is challenging for both orthodontists and oral surgeons. To treat a maxillary canine impaction without risking damage to adjacent teeth, it is necessary to use cone-beam computed tomography for proper localization and treatment planning. In this case report, a palatally impacted canine was initially retracted distally with a microimplant inserted in the palatal slope and then was moved buccally into its ideal position. The patient's occlusion and smile esthetics were significantly improved after orthodontic treatment., (Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Tumors that develop in old burn scars are usually squamous cell carcinomas. Sarcomas have also been reported, albeit rarely. To our knowledge, there has been only one case report of an extraskeletal osteosarcoma arising in a prior burn scar reported in the English-language literature, mainly discussing the clinicopathological features. Herein, we present a case of cutaneous osteosarcoma visualized as a mineralized soft-tissue mass arising from the scar associated with a previous skin burn over the back. This seems to be the first report describing the imaging features of a cutaneous osteosarcoma from an old burn scar.

Background: The goal of this study was to determine if left ventricular (LV) global longitudinal strain (GLS) predicts heart failure (HF) readmission in patients with acute decompensated heart failure., Methods and Results: Two hundred ninety one patients were enrolled at the time of admission for acute decompensated heart failure between January 2011 and September 2013. Left ventricle global longitudinal strain (LV GLS) by velocity vector imaging averaged from 2, 3 and 4-chamber views could be assessed in 204 out of 291 (70%) patients. Mean age was 63.8 ± 15.2 years, 42% of the patients were males and 78% were African American or Hispanic. Patients were followed until the first HF hospital readmission up to 44 months. Patients were grouped into quartiles on the basis of LV GLS. Kaplan-Meier curves showed significantly higher readmission rates in patients with worse LV GLS (log-rank p < 0.001). After adjusting for age, sex, history of ischemic heart disease, dementia, New York Heart Association class, LV ejection fraction, use of angiotensin converting enzyme inhibitors or angiotensin receptor blockers, systolic and diastolic blood pressure on admission and sodium level on admission, worse LV GLS was the strongest predictor of recurrent HF readmission (p < 0.001). The ejection fraction was predictive of readmission in univariate, but not in multivariate analysis., Conclusion: LV GLS is an independent predictor of HF readmission after acute decompensated heart failure with a higher risk of readmission in case of progressive worsening of LV GLS, independent of the ejection fraction.

A girl, aged 11 years 4 months, with a skeletal Class II pattern and a severe overjet (10 mm) was treated with a Twin-block appliance. After 9 months of appliance therapy, the skeletal Class II was overcorrected. After 26 months of retention, when the occlusion was stable and the growth rate was diminishing, fixed orthodontic appliances using temporary skeletal anchorage devices were initiated. The total active treatment time with fixed orthodontic appliances was 30 months. Posttreatment records after 18 months demonstrated excellent stability: a functional occlusion and a pleasing facial balance. Cone-beam computed tomography was used to visualize temporomandibular joint adaptations after the functional and fixed orthodontic therapies., (Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)