Search

Self-assembly in aqueous solutions of an amphiphilic comblike polyelectrolyte (80C12) that consists of a polystyrene (PS) backbone onto which quaternary ammonium pendant moieties have been grafted has been investigated by light scattering and cryo-transmission electron microscopy measurements in the presence of KCl and methylviologen dication (MV 2+ ) under conditions mimicking those for electrochemical measurements. Polymer chains self-assemble within branched cylindrical micelles that display viscoelastic properties, characterized by a relaxation time of 4 s. To tune this time, 80C12 was mixed with a polyoxyethylene nonionic surfactant (Brij C 12 E 10 ). Relatively increasing the amount of the latter leads to a decrease in the relaxation time of the 80C12 solution. Correlatively, electrochemical experiments with a rotating disk electrode show a transition of the mass transport rate, which deviates from the classical Newtonian behavior in the same velocity domain. This result generalizes what has been already observed with solutions of linear polymers of high molecular weight and wormlike micelles based on surfactants subjected to elongational deformations. Moreover, the critical times derived from rheological and electrochemical experiments display the same trend.

This paper presents development of real time monitoring of binding events on flexible plastic in microchips. Two planar carbon microelectrodes are integrated into an insulated polyethylene terephthalate microchip without direct electrical contact with the solution in the microchannel. It has been possible to probe the electric impedance changes through the interface constituted by the microelectrode/PET microchannel/solution when a biomolecular interaction takes place on the polymer surface. This new transduction for biosensing was demonstrated for the molecular recognition of BSA immobilized on the polymer microchannel surface using the corresponding rabbit anti-BSA antibodies as an analyte in the flow microchannel at the nanomolar range concentration. The equilibrium association constant was determined for the affinity reaction between both ligands and was obtained equal to 5 × 10(7) M(-1). The promising results obtained with this new device make it a competitive biosensor.

Dielectric impedance spectroscopy in a microchip was used for monitoring the adsorption of biomolecules onto a heterogeneous polymer surface obtained after the photoablation process. The sensor comprises a thin dielectric layer with two parallel carbon microband electrodes on the one side, and the photoablated surface on the other. The biomolecules need not to be labelled, as in an optical biosensor, even if they need to be attached to the polymer surface coupled with the microelectrodes when a biomolecular interaction occurs. Based on this principle, a flow sensor has been developed to record the adsorption dynamics illustrated with BSA coating on the heterogeneous surface in a linear dynamic range from 1 picomolar to 1 nanomolar at a fixed low frequency. Modeling the dielectric interface using an appropriate equivalent circuit permits extraction of the values of the interfacial impedance for ultralow protein concentrations. The promising results obtained with this methodology make it a competing method in comparison with optical or electrochemical transduction for biosensor development.

Cylindrical micelles prepared in aqueous solutions from cationic surfactants octadecyl trimethylammonium (OTA+) or cetyltrimethylammonium (CTA+) and parachlorobenzoate (PCB) counterion were successfully imaged after evaporation of water using tapping mode atomic force microscopy (TM-AFM) onto very smooth gold and glass substrates. With the help of the obtained topography AFM images, it was shown that the micellar structures are preserved on gold substrates after evaporation of the solvent despite the new set of stresses due mainly to capillary forces and dehydration. The influence of the substrate on the resulting micellar morphology observed in air was investigated for these two materials: cylindrical micelles were evidenced as loosely adherent on gold surface in the presence of parachlorobenzoate (PCB) and identical, geometrically speaking, to those known to exist in aqueous solutions. In this situation, topographic AFM images allowed us to determine accurately their geometrical characteristics such as diameter and length in the nanometer range. On the other hand, AFM images obtained in air on glass surfaces revealed micellar structures that are different from those existing in the bulk of the solution. Indeed, bilayer-type micelles with a thickness close to twice the surfactant monomer expected length were observed, indicating that the well-established and strong influence of glass on micelle geometry at the glass/solution interface is maintained after evaporation of water. These results have been analyzed on the basis of positive charge of gold deduced from electrochemical impedance spectroscopy (EIS) and Raman spectroscopy measurements on one hand and of the negative charge of glass on the other hand. Although these results appeal to new theoretical considerations dealing with dynamics of evaporation of micellar solution drops and/or with counterion contributions to macromolecular interactions in aqueous solutions and in air, this new AFM imaging method appears to be the more adequate one to image and measure the micelles formed in the presence of water.