Search

Background: The aim of this study was to evaluate the bond strength of AH plus, Acroseal, and Adseal to the root canal dentin., Methods: A total of 36 single-rooted, mandibular premolar teeth were used. Root canal shaping procedures were performed with ProTaper rotary instruments (Dentsply Maillefer) up to size F4. The prepared samples were then randomly assembled into 3 groups (n = 12). For each group, an ultrasonic tip (size 15, 0.02 taper) which was also coated with an epoxy resin based sealer and placed 2 mm shorter than the working length. The sealer was then activated for 10 s. A push-out test was used to measure the bond strength between the root canal dentine and the sealer. Kruskal-Wallis test to evaluate the push-out bond strength of epoxy based sealer (P = 0.05). The failure mode data were statistically analyzed using Pearson's chi square test (P = 0.05)., Results: Kruskal-Wallis test indicated that there were no statistically significant difference among the push out bond strength values of 3 mm (p = 0.123) and 6 mm (P = 0.057) for groups, there was statistically significant difference push out bond strength value of 9 mm (P = 0.032). Pearson's chi square test showed statistically significant differences for the failure types among the groups., Conclusion: Various epoxy resin based sealers activated ultrasonically showed similar bond strength in oval shaped root canals. Apical sections for all groups have higher push out bond strength values than middle and coronal sections.

Aim: To evaluate ex vivo the incidence of microcracks in root dentine after canal preparation with ProTaper Universal (PTU), RaCe or Safesider instrumentation systems using microcomputed tomography (micro-CT)., Methodology: Thirty freshly extracted mandibular molars with two separate mesial canals and foramina were used. The roots were allocated into three similar groups according to curvature angles and radii of the canals and lengths of the roots. Distal roots were removed and mesial roots were embedded in acrylic resin and instrumented with the PTU, RaCe or Safesider systems up to size 30 (F3 for PTU, size 30, 0.04 taper for RaCe and Safesider) for all instrumentation groups. Dentinal microcracks were evaluated on micro-CT images of the apical 10 mm of the roots with 1-mm intervals. Two experienced observers evaluated the images twice in a blinded fashion. The presence of dentinal microcracks (complete/incomplete cracks and craze lines) was noted and analysed statistically using McNemar and chi-square tests (P = 0.05)., Results: There were microcracks on uninstrumented root sections. All instrumentation systems significantly increased the number of dentinal microcracks when compared to preoperative specimens (P < 0.05). There were new microcracks on the postoperative samples. The PTU system (42%) led to greater number of post-instrumentation microcracks than Safesider (35%) and RaCe (25%) systems, respectively. The difference between PTU and RaCe system was significant (P < 0.05)., Conclusions: All instrumentation systems significantly increased the number of microcracks compared with preoperative specimens. The PTU system generated more post-instrumentation dentinal microcracks than the RaCe system., (© 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.)

Purpose: The aim of this study was to evaluate the microleakage of 4 fiber post-luting systems using the computerized fluid filtration method., Methods: 60 extracted human mandibular permanent premolar teeth were used for the study. The teeth were instrumented with Hedstroem files up to size 60, post spaces were prepared and then Unicore fiber posts were cemented using 4 luting systems. Group1: Duolink, Group 2: Resinomer, Group 3: Fuji Plus, Group 4: Multilink Sprint, Group 5: Positive Control, and Group 6: Negative Control. The samples were stored in distilled water for 2 weeks and then microleakage was evaluated. Data were analyzed with 1 way-ANOVA and Dunett T3 tests (P&lt;.05). Groups 2 and 3 significantly exhibited higher microleakage values than groups 1 and 4 (P&lt;.05)., Results: Resin cements used with total etch-bonding systems demonstrated lower microleakage values than the other cements., Conclusions: Reduction of steps in dentin conditioning of resin luting cements may have a promoting effect on microleakage.

Purpose: The aim of this study was to compare the efficiency of different final irrigation techniques to remove artificially placed dentinal debris from a simulated internal root resorption (IRR) cavity., Methods: Seventy teeth were prepared using the ProTaper system. The roots were then split longitudinally into two halves, in each of which standardized IRR cavities were prepared. Five teeth were set aside to serve as negative control group. Each cavity of the remaining 65 teeth was filled with dentin debris mixed with 2.5% NaOCl. Another 5 teeth (positive control) were not subjected to the debris removal procedure. Sixty teeth were randomly divided into four experimental groups (n = 15), according to the final irrigation technique used: conventional syringe irrigation (CSI), the Self-Adjusting File (SAF), passive ultrasonic irrigation (PUI), and the EndoActivator (EA). Ten milliliters of 2.5% NaOCl was used during the debris removal procedure. The root halves were disassembled, and the amount of remaining debris was evaluated under a stereomicroscope at 30× magnification., Results: SAF and PUI removed debris significantly better than CSI and EA (P<.05). CSI was the least effective in debris removal (p<0.05)., Conclusions: None of the irrigation techniques used was able to completely remove debris from simulated IRR cavities.

Dens invaginatus is a well-recognized phenomenon, and its endodontic treatment poses a challenge, especially for peri-invagination lesions with vital pulp. Here we describe the outcome of conservative treatment and follow-up in a case of type III dens invaginatus. Cone-beam computed tomography was used for diagnosis and follow-up. Pulp vitality was preserved with endodontic treatment of only an invaginated canal. At the 24-month follow-up examination, the tooth was asymptomatic and repair of the lesion was evident radiographically. This case was managed successfully with endodontic treatment of the invagination. (J Oral Sci 56, 307-310, 2014).

The aim of this study was to compare apical centring ability of nickel titanium (NiTi) ProTaper, RaCe and mainly stainless steel Safesider systems using micro-computed tomography. Thirty freshly extracted mandibular molars with two separate mesial canals and separate foramina were used for the study. Mesial roots were embedded in acrylic resin and instrumented with the ProTaper, RaCe or Safesider systems. Root canal transportation and centring ability of the instruments were evaluated using superimposed micro-computed tomography images of the apical 4 mm of the roots taken at 1 mm intervals. One-way analysis of variance and post hoc Tukey's tests were performed to compare apical transportations. Significant differences were observed between groups at the apical 1, 2 and 3 mm levels (P < 0.05). The reciprocating Safesider system transported root canals significantly more than the other two NiTi systems in the apical 1 mm level (P = 0.001) and more than RaCe system in the apical 2 mm level (P = 0.003). The ProTaper instruments caused more apical root canal transportation than did RaCe instruments at apical 3 mm (P = 0.045). NiTi instrumentation systems showed better centring ability than the mainly stainless steel Safesider system because of the flexible structure of the NiTi alloy., (© 2013 The Authors. Australian Endodontic Journal © 2013 Australian Society of Endodontology.)

Objective: To assess the influence of various canal-drying techniques on the push-out bond strength between radicular dentine and both MTA Fillapex and iRoot SP sealers., Materials and Methods: Eighty extracted single-root teeth were instrumented with ProTaper Universal rotary instruments to a size F4. The teeth were randomly assigned to 1 of 4 groups as follows: group 1, excess fluid in the canals was removed using a Luer vacuum adapter; group 2, the canals were dried with a single paper point; group 3, the canals were dried with 3-5 paper points, and group 4, the canals were rinsed with 95% ethanol and then dried with 3-5 paper points. In each group, the specimens were subgrouped according to root canal sealer into either subgroup A (MTA Fillapex) or subgroup B (iRoot SP sealer). Horizontal sections (thickness 1 ± 0.1 mm) were obtained from each specimen and a push-out test was performed using a universal testing machine at a crosshead speed of 1 mm/min on root slices. Statistical analysis was done using the Kruskal-Wallis test and Dunn's test for pair-wise comparisons. p < 0.05 was considered statistically significant., Results: Canals dried with only 1 paper point and obturated with the iRoot SP sealer (subgroup 2B) showed significantly higher bond strengths to the root canal wall compared to all other subgroups (p < 0.05), except for subgroup 1B (p > 0.05)., Conclusions: The canal-drying technique influenced the adhesive bond strength between calcium silicate-based root canal sealers and the root canal wall., (© 2014 S. Karger AG, Basel.)

The purpose of this study was to compare in vitro bonding effectiveness of Vertise Flow (VF), a new self-adhering flowable composite (FC), and Ultimate Flow (UF), a conventional FC, to BioAggregate (BA), and to investigate whether the use of self-etch or etch-andrinse adhesive improved the bond strength of VF to BA. Shear bond strengths of FC to BA were measured for this reason. Data were analyzed using Wilcoxon and Mann-Whitney U-tests (p=0.05). There were significant differences of bond strengths after 24- and 72-h (p<0.05, p<0.001). After 72-h, self-adhering FC may be used successfully with BA and no other adhesive, as an alternative to the combined use of conventional FC and self-etch adhesives. The use of etch-and-rinse adhesives with self-adhering FC may improve adhesion to BA.

Objective: The aim of this study was to evaluate the apical root canal adaptation performance of various root canal instruments., Materials and Methods: A total of 40 freshly extracted single-rooted mandibular incisors were used in this study. Coroner parts of all teeth were removed from cemento-enamel junction and root canal of each tooth was explored with a size 8 K-file until the tip of the file was just visible at the apex. Working lengths (WLs) were determined as 1 mm short of these measurements. ProTaper, K-file, profile and hedstroem files were inserted into the root canals of 10 teeth to the WL following the flaring of the coronal and middle thirds. Instruments were fixed in the root canals with acrylic resin. The apical 1 mm of each root tip was ground on wet sandpaper to expose the canal and the instrument at the WL and the apical region of each tooth was examined under stereomicroscope. The stereoscopic images of the teeth were digitized and analyzed with software in order to determine the differences between the areas of root canals and file tips. Result data were analyzed using the one-way analysis of variance test (P = 0.05)., Results: There were no significant differences between apical file/root canal areas of the evaluated instruments (P > 0.05)., Conclusions: None of the evaluated instruments performed a perfect adaptation with the apical root canal surface at the WL in mandibular incisors. Therefore, total removal of the debris from the apical canal surface may not be achieved when these filing instruments are used.

Aim: The aim of our study was to evaluate the likelihood that conscious sedation (CS) with intravenous midazolam could become an alternative modality to general anesthesia (GA) for dental procedures., Materials and Methods: In our study, 58 and 47 American Society of Anesthesiologists (ASA)-1 pediatric patients, aged 2-12 (mean 6) years, underwent dental procedures and minor oral surgical procedures under GA and CS with intravenous midazolam, respectively. The two groups were evaluated in terms of vital signs, duration of the treatment procedure, patient behavior, and the treatment comfort experienced by the physicians., Results: The oxygen saturation level was significantly lower (GA: 99.0 ± 0.30, CS: 98.4 ± 1.02; P < 0.001) and the duration of the treatment procedure was significantly shorter (P < 0.001) in the sedation group compared with the GA group. The physicians encountered various difficulties during implementation of the treatment strategy in cases where they used CS. Minor oral surgical procedures and tooth extraction processes requiring no saline irrigation, however, could be performed successfully under CS., Conclusions: In cases requiring multiple dental management issues, the sedation method was not found to be a useful alternative to GA.

Aim: To compare the efficacy of several techniques for the removal of calcium hydroxide (Ca(OH)(2)) from root canals., Methodology: The root canals of 24 freshly extracted human mandibular premolars were prepared with ProTaper rotary instruments. The teeth were sectioned longitudinally along the length of the instrumented canals. The roots were subsequently reassembled with wires. After Ca(OH)(2) was placed into the canals, four techniques were used for its removal. In Group I, the teeth were irrigated with 5 mL of 2.5% NaOCl. Group II was treated in the same manner as Group I, but 5 mL of 17% EDTA was used in addition to NaOCl. In Group III, the teeth were irrigated with 5 mL of 2.5% NaOCl and agitated by an ultrasonic unit. In Group IV, the teeth were irrigated with 5 mL of 2.5% NaOCl and a CanalBrush was used to remove the Ca(OH)(2) . The roots were disassembled and digital photographs were taken. Measurements of residual Ca(OH)(2) were performed as percentages of the overall canal surface area. The data was analysed with one-way ANOVA with post hoc Tukey test., Results: Significantly less residual material was obtained with a CanalBrush and passive ultrasonic agitation of NaOCl than the other groups (P < 0.05). There was no significant difference between syringe delivery of NaOCl and NaOCl+EDTA (P > 0.05)., Conclusions: None of the techniques removed the Ca(OH)(2) dressing completely. CanalBrush and ultrasonic agitation of NaOCl were significantly more effective than irrigant-only techniques., (© 2011 International Endodontic Journal.)