Search

Nowadays, packaging technologies have been extensively developed, including active and intelligent packages able to promote quality, safety, and the product shelf life. At this purpose, the aim of the study was focused on the design and development of polyvinyl alcohol-based nanofibers doped with two natural clays, montmorillonite or clinoptilolite, and loaded with chlorogenic acid, as nanofibrous membranes to control microbial contamination and oxidative state upon direct contact. The results showed that the 1 % w/w clay doping was the optimal concentration to obtain continuous and uniform nanofibers. In addition, chlorogenic acid loading (5 % w/w) into the nanofibers did not change the systems morphology, resulting in a chlorogenic acid sustained release, achieving 100 % within 24 h for all the systems with enhanced antioxidant and antimicrobial activities. Depending on their structure, the presence of the clays mineral was able to affect the aqueous vapor permeability. These results suggested the promising applications of the clay doped polyvinyl alcohol-based nanofibrous membranes as smart advanced material able to control microbial contamination and oxidative degradation to be used in biomedical field or as active packaging.

Chronic wounds (resulting from underlying disease, metabolic disorders, infections, trauma, and even tumours) pose significant health problems. In this work, microparticles, based on polysaccharides (maltodextrin or dextran) and amino acids, and doped with antibacterial nanoparticles (CuO or ZnO NPs) are designed. Smart nano-in-microparticles with a hierarchical 3D structure are developed. The ultimate goal aims at an innovative platform to achieve skin repair and to manage skin colonization by avoiding infection that could delay and even impair the healing process. The microparticles are prepared by spray-drying and cross-linked by heating, to obtain insoluble scaffolds able to facilitate cell proliferation in the wound bed. The nano-in-microparticles are characterized using a multidisciplinary approach: chemico–physical properties (SEM, SEM-EDX, size distribution, swelling and degradation properties, structural characterization - FTIR, XRPD, SAXS – mechanical properties, surface zeta potential) and preclinical properties (in vitro biocompatibility and whole-blood clotting properties, release studies and antimicrobial properties, and in vivo safety and efficacy on murine burn/excisional wound model) were assessed. The hierarchical 3D nano-in microparticles demonstrate to promote skin tissue repair in a preclinical study, indicating that this platform deserves particular attention and further investigation will promote the prototypes translation to clinics.

Clay minerals are historically among the most used materials with a wide variety of applications. In pharmaceutical and biomedical fields, their healing properties have always been known and used in pelotherapy and therefore attractive for their potential. In recent decades, the research has therefore focused on the systematic investigation of these properties. This review aims to describe the most relevant and recent uses of clays in the pharmaceutical and biomedical field, especially for drug delivery and tissue engineering purposes. Clay minerals, which are biocompatible and non-toxic materials, can act as carriers for active ingredients while controlling their release and increasing their bioavailability. Moreover, the combination of clays and polymers is useful as it can improve the mechanical and thermal properties of polymers, as well as induce cell adhesion and proliferation. Different types of clays, both of natural (such as montmorillonite and halloysite) and synthetic origin (layered double hydroxides and zeolites), were considered in order to compare them and to assess their advantages and different uses.

Despite the health benefits of the sun, overexposure to solar radiation without proper precautions can cause irreversible damage to exposed skin. In the search for balance between the risks and benefits of exposure to solar radiation in human health, a technological alternative was found, the incorporation of photoprotective products in lipid nanoparticulate systems for topical application. These nanometric systems have demonstrated several advantages when used as adjuvants in photoprotection compared to chemical and/or physical sunscreens alone. The increase in the sun protection factor (SPF), photostability and UV action spectrum are parameters that have benefited from the application of these systems in order to increase the effectiveness and safety of photoprotective formulations containing organic and/or inorganic sunscreens.

Halloysite is an aluminosilicate clay with a predominantly hollow tubular structure (HNTs) able to act as a nanocontainer for the encapsulation of several chemicals. However, HNTs possess low affinity for metal ions in their pristine form and they need to be modified for improving their adsorption capabilities. Therefore, to overcome this issue herein we report a straightforward approach for the covalent modification of the external surface of halloysite nanotubes with hectorite clay. Compared to halloysite, hectorite possesses a lamellar structure with higher cation exchange capacity. The covalent linkage between the two clays was verified by several techniques (FTIR spectroscopy, 13C CP-MAS NMR, TGA, ζ−potential, DLS, and XRD measurements) and the morphology was imaged by TEM investigations. As proof of concept the adsorption ability of the obtained nanomaterial in comparison to pristine clays was proved using ciprofloxacin and silver ions chosen as models for their different chemical characteristics.

Infections in nonhealing wounds remain one of the major challenges. Recently, nanomedicine approach seems a valid option to overcome the antibiotic resistance mechanisms. The aim of this study was the development of three types of polysaccharide-based scaffolds (chitosan-based (CH), chitosan/chondroitin sulfate-based (CH/CS), chitosan/hyaluronic acid-based (CH/HA)), as dermal substitutes, to be loaded with norfloxacin, intended for the treatment of infected wounds. The scaffolds have been loaded with norfloxacin as a free drug (N scaffolds) or in montmorillonite nanocomposite (H—hybrid-scaffolds). Chitosan/glycosaminoglycan (chondroitin sulfate or hyaluronic acid) scaffolds were prepared by means of electrospinning with a simple, one-step process. The scaffolds were characterized by 500 nm diameter fibers with homogeneous structures when norfloxacin was loaded as a free drug. On the contrary, the presence of nanocomposite caused a certain degree of surface roughness, with fibers having 1000 nm diameters. The presence of norfloxacin–montmorillonite nanocomposite (1%) caused higher deformability (90–120%) and lower elasticity (5–10 mN/cm2), decreasing the mechanical resistance of the systems. All the scaffolds were proven to be degraded via lysozyme (this should ensure scaffold resorption) and this sustained the drug release (from 50% to 100% in 3 days, depending on system composition), especially when the drug was loaded in the scaffolds as a nanocomposite. Moreover, the scaffolds were able to decrease the bioburden at least 100-fold, proving that drug loading in the scaffolds did not impair the antimicrobial activity of norfloxacin. Chondroitin sulfate and montmorillonite in the scaffolds are proven to possess a synergic performance, enhancing the fibroblast proliferation without impairing norfloxacin’s antimicrobial properties. The scaffold based on chondroitin sulfate, containing 1% norfloxacin in the nanocomposite, demonstrated adequate stiffness to sustain fibroblast proliferation and the capability to sustain antimicrobial properties to prevent/treat nonhealing wound infection during the healing process.

The increase in life expectancy and the increasing prevalence of diabetic disease and venous insufficiency lead to the increase of chronic wounds. The prevalence of ulcers ranges from 1% in the adult population to 3−5% in the over 65 years population, with 3−5.5% of the total healthcare expenditure, as recently estimated. The aim of this work was the design and the development of electrospun scaffolds, entirely based on biopolymers, loaded with montmorillonite (MMT) or halloysite (HNT) and intended for skin reparation and regeneration, as a 3D substrate mimicking the dermal ECM. The scaffolds were manufactured by means of electrospinning and were characterized for their chemico-physical and preclinical properties. The scaffolds proved to possess the capability to enhance fibroblast cells attachment and proliferation with negligible proinflammatory activity. The capability to facilitate the cell adhesion is probably due to their unique 3D structure which are assisting cell homing and would facilitate wound healing in vivo.

Considering the challenges of urea administration due to the high ureolytic activity of the rumen and the importance of its use, as well as taking into account the relevance of sustainably exploiting the technological potential of biodiversity, this research studies the encapsulation of urea in different clay minerals (palygorskite (Pal), sepiolite (Sep), and Veegum® (V)) as an alternative for use as nonprotein nitrogen (NNP) sources. A method of incorporation was developed in which the encapsulation of urea was proven by X-ray diffraction; fibrous materials, Pal and Sep had similar characteristics due to the decrease in the relative plane intensity (011), suggesting a decrease in the order of their stacking due to the presence of urea on the surface or inside channels. By contrast, V showed a 7.74° reflection shift, suggesting an increase in basal spacing from 11.45 Å in V to 14.88 Å in the sample after urea encapsulation. By thermogravimetry, it was observed that the presence of urea did not change the mass-loss profiles but only increased the percentage of loss in respective events, indicating urea incorporation in the clay minerals. These results provide a promising alternative for administering NNP sources in the ruminant diet.

We present the experience of a teaching team at the University of Granada made up of five experienced teachers and thirteen novices all working in the areas of Health Sciences and Experimental Sciences. This experience involved processes of training, self-criticism and putting into practice some strategies aimed at improving the teaching-learning process. In this article the following points are covered: The background of the team and the current situation, specifically the activities carried out and the results obtained with respect to the novice teachers. Among the developments we can point out innovations in Formative and Shared Evaluation in diverse subjects within the departments of Fine Arts, Biology, Environmental Science, Pharmacy, Chemical Engineering, and Chemistry. The experience of the teaching team as a collaborative workgroup is useful not only to the novice teachers but also to the experienced teachers.

Abstract The Triassic red beds of the Tabular Cover of the Iberian Meseta are an excellent reservoir outcrop analogue, a direct consequence of high‐quality exposures, which offer exceptional three‐dimensional outcrops, as well as a wide variability of depositional environments. Fluvial and transitional with tide‐influenced and wave‐influenced settings are recognised. Three point bar geobodies of similar scale, but influenced by different processes, were selected from this succession. Point bar geobody 1 was influenced by purely fluvial processes while geobodies 2 and 3 were tide‐influenced. Both types of geobody were developed as point bar deposits in sinuous channels. A fully integrated study was carried out on these geobodies, utilising both outcrop and subsurface‐based approaches, to characterise the key differences between fluvial and tidal point bars in the sedimentary record. The outcrop‐based component involved traditional field data collection methods alongside digital techniques and data capture, including the use of digital outcrop models. Additionally, subsurface‐based methods were employed, utilising core and wireline logs obtained from wells drilled in close proximity to the outcrop. The integration of these approaches aims to accurately differentiate the depositional settings of the three different geobodies, which while apparently very similar in many key respects also exhibit considerable differences when considered from the perspective of subsurface management of potentially similar geobodies. This study also emphasises the need to clearly distinguish high‐sinuosity deposits based on their depositional sub‐environment in order to properly evaluate their potential for subsurface management. Additionally, it highlights the presence and importance of internal baffles that may well influence fluid migration and indeed even compartmentalise geobodies. Three point bar geobodies of similar scale, but influenced by different processes, have been selected in this succession. A fully integrated study was carried out on these geobodies, utilising both outcrop‐based and subsurface‐based approaches, to characterise the key differences between fluvial and tidal point bars in the sedimentary record.

Chronic wounds are non-healing lesions characterized by a high degree of inflammation, posing significant challenges in clinical management due to the increased risk of severe infection. This study focuses on developing a powder for cutaneous application to enhance the healing and prevent infections in chronic wounds. The smart nanocomposites-based biomimetic microparticles here developed combine the properties of chitosan and of clays and represent a significant innovation in the field of biomaterials for skin regeneration since they possess enhanced antimicrobial properties, are multi-functional scaffolds and promote cell proliferation, support tissue reconstruction by mimicking the natural extracellular matrix, and provide hemostatic properties to control bleeding during wound closure. The microparticles were made of chitosan and doped with clay minerals, specifically montmorillonite or layered double hydroxides, containing copper ions. The synergistic combination of biomimetic polymers and clays aims to regulate cellular responses, angiogenesis, and extracellular matrix (ECM) deposition, leveraging the bioactive properties of both components to promote wound healing. Montmorillonite and layered double hydroxides were enriched with copper ions through intercalation or coprecipitation methods, respectively. The water-insoluble microparticles were prepared using a chitosan derivative, chitosan carbamate, synthesized to obtain chitosan-based microparticles via spray-drying without crosslinkers. Physico-chemical characterization confirmed the successful doping of Cu-clay interaction products in the microparticles. In addition to enhanced cell proliferation and hemostatic properties, the presence of Cu-clays boosted the microparticles’ antibacterial properties. Encouraging preclinical in vitro and in vivo results suggest that these smart nanocomposite biomimetic microparticles doped with Cu-enriched clay minerals could be promising candidates for simultaneously enhancing healing and controlling infections in chronic wounds.

The research workflow employed in the SOSGAS project is presented, aimed at the Quality Assessment as a reservoir of CO2 and green H2 in heterogeneous Mesozoic and Cenozoic fluvial and deltaic formations of the Iberian Plateau and the Ebro and Graus-Tremp Basins. Through the integrated study of outcrop and subsurface data (derived from boreholes drilled behind the outcrops), conceptual models are developed for each examined case, describing variations in sedimentary heterogeneities. These models contribute to the static modeling of different geobodies and their petrophysical properties. Finally, dynamic modeling, based on gas injection simulation experiments (CO2 and H2) into static models, enables the analysis of the sustainability of geo-storage projects for these key fluids in the energy transition.

Background/Objectives: The development of therapies targeting unregulated Src signaling through selective kinase inhibition using small-molecule inhibitors presents a significant challenge for the scientific community. Among these inhibitors, pyrazolo[3,4-d]pyrimidine heterocycles have emerged as potent agents; however, their clinical application is hindered by low solubility in water. To overcome this limitation, some carrier systems, such as halloysite nanotubes (HNTs), can be used. Methods: Herein, we report the development of HNT-based nanomaterials as carriers for pyrazolo[3,4-d]pyrimidine molecules. To achieve this objective, the clay was modified by two different approaches: supramolecular loading into the HNT lumen and covalent grafting onto the HNT external surface. The resulting nanomaterials were extensively characterized, and their morphology was imaged by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). In addition, the kinetic release of the molecules supramolecularly loaded into the HNTs was also evaluated. QSAR studies were conducted to elucidate the physicochemical and pharmacokinetic properties of these inhibitors, and structure-based virtual screening (SBVS) was performed to analyze their binding poses in protein kinases implicated in cancer. Results: The characterization methods demonstrate successful encapsulation of the drugs and the release properties under physiological conditions. Furthermore, QSAR studies and SBVS provide valuable insights into the physicochemical, pharmacokinetic, and binding properties of these inhibitors, reinforcing their potential efficacy. Conclusions: The cytotoxicity of these halloysite-based nanomaterials, and of pure molecules for comparison, was tested on RT112, UMUC3, and PC3 cancer cell lines, demonstrating their potential as effective agents for prostate and bladder cancer treatment.

This work combines experimental and computational modeling studies for the preparation of a composite of metformin and an organoclay, examining the advantages of a Tunisian clay used for drug delivery applications. The clay mineral studied is a montmorillonite-like smectite (Sm-Na), and the organoclay derivative (HDTMA-Sm) was used as a drug carrier for metformin hydrochloride (MET). In order to assess the MET loading into the clays, these materials were characterized by means of cation exchange capacity assessment, specific surface area measurement, and with the techniques of X-ray diffraction (XRD), differential scanning calorimetry, X-ray fluorescence spectroscopy, and Fourier-transformed infrared spectroscopy. Computational molecular modeling studies showed the surface adsorption process, identifying the clay–drug interactions through hydrogen bonds, and assessing electrostatic interactions for the hybrid MET/Sm-Na and hydrophobic interactions and cation exchange for the hybrid MET/HDTMA-Sm. The results show that the clays (Sm-Na and HDTMA-Sm) are capable of adsorbing MET, reaching a maximum load of 12.42 and 21.97 %, respectively. The adsorption isotherms were fitted by the Freundlich model, indicating heterogeneous adsorption of the studied adsorbate–adsorbent system, and they followed pseudo-second-order kinetics. The calculations of ΔGº indicate the spontaneous and reversible nature of the adsorption. The calculation of ΔH° indicates physical adsorption for the purified clay (Sm-Na) and chemical adsorption for the modified clay (HDTMA-Sm). The release of intercalated MET was studied in media simulating gastric and intestinal fluids, revealing that the purified clay (Sm-Na) and the modified organoclay (HDTMA-Sm) can be used as carriers in controlled drug delivery in future clinical applications. The molecular modeling studies confirmed the experimental phenomena, showing that the main adsorption mechanism is the cation exchange process between proton and MET cations into the interlayer space.

Tetroxane derivatives are interesting drugs for antileishmaniasis and antimalaric treatments. The gas-phase thermal decomposition of 3,6,-dimethyl-1,2,4,5-tetroxane (DMT) and 3,3,6,6,-tetramethyl-1,2,4,5-tetroxane (acetone diperoxide (ACDP)) was studied at 493–543 K by direct gas chromatography by means of a flow reactor. The reaction is produced in the injector chamber at different temperatures. The resulting kinetics Arrhenius equations were calculated for both tetroxanes. Including the parent compound of the series 1,2,4,5-tetroxane (formaldehyde diperoxide (FDP)), the activation energy and frequency factors decrease linearly with the number of methyl groups. The reaction mechanisms of ACDP and 3,6,6-trimethyl-1,2,4,5-tetroxane (TMT) decomposition have been studied by means of the DFT method with the BHANDHLYP functional. Our calculations confirm that the concerted mechanism should be discarded and that only the stepwise mechanism occurs. The critical points of the singlet and triplet state potential energy surfaces (S- and T-PES) of the thermolysis reaction of both compounds have been determined. The calculated activation energies of the different steps vary linearly with the number of methyl groups of the methyl-tetroxanes series. The mechanism for the S-PES leads to a diradical O···O open structure, which leads to a C···O dissociation in the second step and the production of the first acetaldehyde/acetone molecule. This last one yields a second C···O dissociation, producing O2 and another acetone/acetaldehyde molecule. The O2 molecule is in the singlet state. A quasi-parallel mechanism for the T-PES from the open diradical to products is also found. Most of the critical points of both PES are linear with the number of methyl groups. Reaction in the triplet state is much more exothermic than the singlet state mechanism. Transitions from the singlet ground state, S0 and low-lying singlet states S1–3, to the low-lying triplet excited states, T1–4, (chemical excitation) in the family of methyl tetroxanes are also studied at the CASSCF/CASPT2 level. Two possible mechanisms are possible here: (i) from S0 to T3 by strong spin orbit coupling (SOC) and subsequent fast internal conversion to the excited T1 state and (ii) from S0 to S2 from internal conversion and subsequent S2 to T1 by SOC. From these experimental and theoretical results, the additivity effect of the methyl groups in the thermolysis reaction of the methyl tetroxane derivatives is clearly highlighted. This information will have a great impact for controlling these processes in the laboratory and chemical industries.

The development of fluorescent materials that can act as sensors for the determination of metal ions in biological fluids is important since they show, among others, high sensitivity and specificity. However, most of the molecules that are used for these purposes possess a very low solubility in aqueous media, and, thus, it is necessary to adopt some derivation strategies. Clay minerals, for example, hectorite, as natural materials, are biocompatible and available in large amounts at a very low cost that have been extensively used as carrier systems for the delivery of different hydrophobic species. In the present work, we report the synthesis and characterization of a hectorite/phenanthroline nanomaterial as a potential fluorescent sensor for Zn ion detection in water. The interaction of phenanthroline with the Ht interlaminar space was thoroughly investigated, via both theoretical and experimental studies (i.e., thermogravimetry, FT-IR, UV-vis and fluorescence spectroscopies and XRD measurements), while its morphology was imaged by scanning electron microscopy. Afterwards, the possibility to use it as sensor for the detection of Zn2+ ions, in comparison to other metal ions, was investigated through fluorescent measurements, and the stability of the solid Ht/Phe/Zn complex was assessed by different experimental and theoretical measurements.

Babassu carbohydrate fibers (BCF) are abundant and renewable materials that are currently underutilized. The present work evaluates the use of alkaline-treated BCF (TF − 0.6, 1.0, 1.4% w/w) as additive to cementitious mortars. Mass consistency, specific mass, water absorption, void ratio, and porosity, as well as compressive and indirect tension fracture strengths, were evaluated and compared to control mortars (without fiber addition). The results confirmed that the treated BCF can be an effective alternative as a potential reinforcement in cementitious composites. Furthermore, they are prepared by an alkaline treatment that is easy to operate, cost-effective, and efficient. The addition of BCF to the cement matrix decreased the water absorption capacity and void ratio, whereas increased compressive and tensile strength compared to mortars prepared in the absence of BCF. In particular, the addition of 1.0% of TF increased the compressive strength by up to 77%. Good interfacial adhesion of the alkaline-treated BCF with the rest of mortar components resulted in an increase in the values of mechanical properties. The studied fibers are potential materials for new sustainable mortars with improved properties.

The development of green synthesized polymeric nanoparticles with anticancer studies has been an emerging field in academia and the pharmaceutical and chemical industries. Vegetable oils are potential substitutes for petroleum derivatives, as they present a clean and environmentally friendly alternative and are available in abundance at relatively low prices. Biomass-derived chemicals can be converted into monomers with a unique structure, generating materials with new properties for the synthesis of sustainable monomers and polymers. The production of bio-based polymeric nanoparticles is a promising application of green chemistry for biomedical uses. There is an increasing demand for biocompatible and biodegradable materials for specific applications in the biomedical area, such as cancer therapy. This is encouraging scientists to work on research toward designing polymers with enhanced properties and clean processes, containing oncology active pharmaceutical ingredients (APIs). The nanoencapsulation of these APIs in bio-based polymeric nanoparticles can control the release of the substances, increase bioavailability, reduce problems of volatility and degradation, reduce side effects, and increase treatment efficiency. This review discusses the use of green chemistry for bio-based nanoparticle production and its application in anticancer medicine. The use of castor oil for the production of renewable monomers and polymers is proposed as an ideal candidate for such applications, as well as more suitable methods for the production of bio-based nanoparticles and some oncology APIs available for anticancer application.

This study aimed to develop a prolonged-release system based on palygorskite and chitosan, which are natural ingredients widely available, affordable, and accessible. The chosen model drug was ethambutol (ETB), a tuberculostatic drug with high aqueous solubility and hygroscopicity, which is incompatible with other drugs used in tuberculosis therapy. The composites loaded with ETB were obtained using different proportions of palygorskite and chitosan through the spray drying technique. The main physicochemical properties of the microparticles were determined using XRD, FTIR, thermal analysis, and SEM. Additionally, the release profile and biocompatibility of the microparticles were evaluated. As a result, the chitosan–palygorskite composites loaded with the model drug appeared as spherical microparticles. The drug underwent amorphization within the microparticles, with an encapsulation efficiency greater than 84%. Furthermore, the microparticles exhibited prolonged release, particularly after the addition of palygorskite. They demonstrated biocompatibility in an in vitro model, and their release profile was influenced by the proportion of inputs in the formulation. Therefore, incorporating ETB into this system offers improved stability for the administered product in the initial tuberculosis pharmacotherapy dose, minimizing its contact with other tuberculostatic agents in the treatment, as well as reducing its hygroscopicity.

L-ascorbic acid (LAA), commonly known as vitamin C, is an excellent and recognized antioxidant molecule used in pharmaceutical and cosmetic formulations. Several strategies have been developed in order to preserve its chemical stability, connected with its antioxidant power, but there is little research regarding the employment of natural clays as LAA host. A safe bentonite (Bent)—which was verified by in vivo ophthalmic irritability and acute dermal toxicity assays—was used as carrier of LAA. The supramolecular complex between LAA and clay may constitute an excellent alternative, since the molecule integrity does not seem to be affected, at least from the point of view of its antioxidant capacity. The Bent/LAA hybrid was prepared and characterized through ultraviolet (UV) spectroscopy, X-ray diffraction (XRD), infrared (IR) spectroscopy, thermogravimetric analysis (TG/DTG) and zeta potential measurements. Photostability and antioxidant capacity tests were also performed. The LAA incorporation into Bent clay was demonstrated, as well as the drug stability due to the Bent photoprotective effect onto the LAA molecule. Moreover, the antioxidant capacity of the drug in the Bent/LAA composite was confirmed.

Bentonite or palygorskite-based hydrogels have recently been suggested as a strategy to increase bioavailability and control the retention and release of therapeutic candidates. In this work, clay-based hydrogels loaded with diclofenac acid nanocrystals have been successfully designed and developed. The aim was to improve diclofenac solubility, its dissolution rate and to enhance its local bioavailability after topical application. For this purpose, diclofenac acid nanocrystals were prepared by wet media milling technology and then loaded into inorganic hydrogels based on bentonite and/or palygorskite. Diclofenac acid nanocrystals were characterized by morphology, size, and zeta potential. Moreover, rheological behavior, morphology, solid state, release studies, and in vitro skin penetration/permeation of diclofenac acid nanocrystals-loaded hydrogels were performed. The hydrogels were characterized by a crystalline structure, and demonstrated that the inclusion of diclofenac in clay-based hydrogels resulted in an increased thermal stability. The presence of both palygorskite and bentonite reduced nanocrystal mobility, and consequently its release and penetration into the skin. On the other hand, bentonite- or palygorskite-based hydrogels revealed great potential as an alternative strategy to enhance topical bioavailability of DCF nanocrystals, enhancing their penetration to the deeper skin layers.

Development of new medicinal products for particular therapeutic treatment or for better manipulations with better quality and less side effects are possible as a result of advanced inorganic and organic materials application, among which zeolites, due to their properties and versatility, have been gaining attention. This paper is an overview of the development in the use of zeolite materials and their composites and modifications as medicinal products for several purposes such as active agents, carriers, for topical treatments, oral formulations, anticancer, the composition of theragnostic systems, vaccines, parenteral dosage forms, tissue engineering, etc. The objective of this review is to explore the main properties of zeolites and associate them with their drug interaction, mainly addressing the advances and studies related to the use of zeolites for different types of treatments due to their zeolite characteristics such as molecule storage capacity, physical and chemical stability, cation exchange capacity, and possibility of functionalization. The use of computational tools to predict the drug—zeolite interaction is also explored. As conclusion was possible to realize the possibilities and versatility of zeolite applications as being able to act in several aspects of medicinal products.

The present work describes the development of a hybrid and pH-responsive system for rifampicin using the clay mineral ‘montmorillonite’ as a nanocarrier. The influence of operational variables on the drug incorporation process was evaluated using 24 factorial designs. Under optimized conditions, the experiment allowed an incorporated drug dose equivalent to 98.60 ± 1.21 mg/g. Hybrid systems were characterized by different characterization techniques (FTIR, XRD, TGA, DSC, and SEM) to elucidate the mechanism of interaction between the compounds used. Through in vitro release studies, it was possible to verify the efficacy of the pH-dependent system obtained, with approximately 70% of the drug released after sixteen hours in simulated intestinal fluid. The adjustment of the experimental release data to the theoretical model of Higuchi and Korsmeyer–Peppas indicated that the release of rifampicin occurs in a prolonged form from montmorillonite. Elucidation of the interactions between the drug and this raw clay reinforces its viability as a novel carrier to develop an anti-TB/clay hybrid system with good physical and chemical stability.

Sulfathiazole is an antimicrobial belonging to the family of sulfonamides, which were the first antibiotics to be discovered. Sulfathiazole is generally administered orally, and its main disadvantage is that it has low aqueous solubility, requiring high doses for its administration. This fact has led to side effects and the generation of bacterial resistance to the drug over time. The improvement of its solubility would mean not having to administer such high doses in its treatment. At the same time, montmorillonite is a natural, low-cost, non-toxic, biocompatible clay with a high adsorption capacity. It is potentially useful as a nanocarrier to design sulfathiazole dosage forms. In this work, the interaction between the drug and the clay mineral has been studied from an experimental and computational atomistic point of view to improve the drug’s biopharmaceutical profile. The results showed the potential enhancement of the drug solubility due to the correct adsorption of the sulfathiazole in the clay interlayer space. As a result of the inclusion of sulfathiazole in the interlayer of the clay mineral, the solubility of the drug increased by 220% concerning the pristine drug. Experimentally, it was not possible to know the number of drug molecules adsorbed in the interlayer space or the external surface of the carrier. Theoretical studies will enable the knowledge of the stoichiometry of the drug/clay hybrids, with three molecules in the interlayer space being the most favorable process. The resultant basal spacing was in agreement with the experimental results.

Traditional medicine uses resin oils extracted from plants of the genus Copaifera for several purposes. Resin oils are being studied to understand and profile their pharmacological properties. The aim of this work was to prepare and to characterize conventional and pegylated liposomes incorporating resin oils or the hexanic extract obtained from Copaifera sabulicola (copaiba) leaves. The cytotoxic effect of these products was also investigated. Conventional and stealth liposomes with copaiba extract showed similar average diameters (around 126 nm), encapsulation efficiencies greater than 75% and were stable for 90 days. A cytotoxicity test was performed on murine glioma cells and the developed liposomes presented antiproliferative action against these cancer cells at the average concentration of 30 μg/mL. Phytochemicals encapsulated in PEGylated liposomes induced greater reduction in the viability of tumor cells. In addition, bioassay-s measured the cytotoxicity of copaiba resin oil (Copaifera sabulicola) in liposomes (conventional and PEGylated), which was also checked against pheochromocytoma PC12 cells. Its safety was verified in normal rat astrocytes. The results indicate that liposomes encapsulating copaiba oil showed cytotoxic activity against the studied tumor strains in a dose-dependent fashion, demonstrating their potential applications as a chemotherapeutic bioactive formulation.

Insects, especially crickets, have been proposed as a novel source of nutrients in human nutrition since they possess bioactive molecules, including high protein content, lipids, chitin, vitamins and minerals. In this work, the nutritional and functional properties of a novel Italian spray-dried (SD) cricket powder were evaluated. The powder was characterized by physico–chemical properties (morphology, size distribution, solid state, thermal profiles, and surface zeta potential), and antioxidant properties. Moreover, preclinical properties (cytocompatibility and pro-inflammatory immune response) were assessed. The powder was characterized by microparticle structure with bulges and rough surfaces, showing distinctive antioxidant properties. The preclinical results suggested that the SD crickets were biocompatible towards Caco-2 and macrophages without immune response, representing an interesting material for the food industry that could provide health benefits in addition to the basic nutritional value of traditional foods.

The poor water solubility of a significant number of active pharmaceutical ingredients (API) remains one of the main challenges in the drug development process, causing low bioavailability and therapeutic failure of drug candidates. Curcumin is a well-known Biopharmaceutics Classification System (BCS) class IV drug, characterized by lipophilicity and low permeability, which hampers topical bioavailability. Given these premises, the aim of this work was the design and the development of curcumin nanocrystals and their incorporation into natural inorganic hydrogels for topical application. Curcumin nanocrystals were manufactured by the wet ball milling technique and then loaded in clay-based hydrogels. Bentonite and/or palygorskite were selected as the inorganic gelling agents. Curcumin nanocrystal-loaded hydrogels were manufactured by means of a homogenization process and characterized with respect to their chemico-physical properties, in vitro release, antioxidant activity and skin permeation. The results highlighted that the presence of bentonite provided an increase of curcumin skin penetration and simultaneously allowed its radical scavenging properties, due to the desirable rheological characteristics, which should guarantee the necessary contact time of the gel with the skin.

This paper presents a comprehensive review of the main types of vaccines approaching production technology, regulatory parameters, and the quality control of vaccines. Bioinformatic tools and computational strategies have been used in the research and development of new pharmaceutical products, reducing the time between supposed pharmaceutical product candidates (R&D steps) and final products (to be marketed). In fact, in the reverse vaccinology field, in silico studies can be very useful in identifying possible vaccine targets from databases. In addition, in some cases (subunit or RNA/ DNA vaccines), the in silico approach permits: (I) the evaluation of protein immunogenicity through the prediction of epitopes, (II) the potential adverse effects of antigens through the projection of similarity to host proteins, (III) toxicity and (IV) allergenicity, contributing to obtaining safe, effective, stable, and economical vaccines for existing and emerging infectious pathogens. Additionally, the rapid growth of emerging infectious diseases in recent years should be considered a driving force for developing and implementing new vaccines and reassessing vaccine schedules in companion animals, food animals, and wildlife disease control. Comprehensive and well-planned vaccination schedules are effective strategies to prevent and treat infectious diseases.