Search

Automated defect detection is difficult to achieve in ceramic tile manufacturing today. Computer vision and machine learning based approaches are commonly utilised for this purpose. This paper considers the problem of defect detection in the textured ceramic tiles quality analysis. Instead of detecting defects on the finished tile, the biscuit tile is considered, a pressed, dried, decorated tile before its firing in the kiln. As it is an intermediary product during tile production, classifying them as defected or not before the firing can significantly reduce energy and material costs. To this end, in this paper we propose a new Fourier spectrum annuli feature extraction method. It is based on Fourier spectrum of the surface biscuit tile image and tested on real tile examples from the ceramic tile industry. According to the observed results, it outperforms several well-known methods for feature extraction on real-world tile datasets reaching an F1 score of 0.9236 and 0.8866 on the Black Random Stripes and Stripes Brown Light tile designs respectively., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 ISA. Published by Elsevier Ltd. All rights reserved.)

Potassium releasing bioactive glasses (BAGs) may offer improved relief for dentine hypersensitivity compared to conventional sodium containing BAGs by releasing K + ions for nerve desensitization and occluding dentinal tubules to prevent fluid flow within dentinal tubules. Potassium oxide was substituted for sodium oxide on a molar basis in a fluoride containing BAG used in toothpastes for treating dentine hypersensitivity. The BAG powders were then immersed in an artificial saliva at pH 7 and tris buffer and the pH rise and ion release behavior were characterized by ICP-OES and ISE. The potassium and sodium containing BAGs were characterized by XRD, DSC, FTIR and NMR. Both BAGs presented amorphous diffraction patterns and the glass transition temperature of the potassium glass was higher than that of the sodium glass. The 31 P MAS-NMR spectra indicated a peak at 2.7 ppm corresponding to apatite and a small peak at -103 ppm indicated crystallization to fluorapatite. Both BAGs dissolved and formed apatite at similar rates, although the dissolution of the potassium glass was slightly slower and it released less fluoride as a result of partial nanocrystallization to fluorapatite upon quenching. The potassium release from the potassium ions could potentially result in nerve deactivation when used in toothpastes.

The Late Neolithic palafitte site, Ustie na Drim, in the northern part of Lake Ohrid (North Macedonia), excavated in 1962, offered ceramic fragments of large, flat, elongated pans. These artifacts could be dated by relative chronology to roughly around 5200-5000 BC. According to their shape and technological traits, the ceramic pans were probably used for baking. The attached materials on the surface of studied pan fragments were sampled for consequent chemical and microscopical analyses (i.e., analyses of starch, phytoliths, and microscopic animal remains). An immunological method revealed the presence of pork proteins in samples. The presence of organic residues of animal origin was, moreover, confirmed by the detection of cholesterol using gas chromatography coupled to mass spectrometry. Analysis of detected microscopic botanical objects revealed starch grains of several plants (i.e., oak, cattail, and grasses). An interesting find was the hair of a beetle larva, which could be interpreted contextually as the khapra beetle, a pest of grain and flour. Based on our data, we suppose that the ceramic pans from Ustie na Drim were used for the preparation of meals containing meat from common livestock in combination with cereals and wild plants.

Neolithization, or the Holocene demographic expansion of farming populations, accounts for significant changes in human and animal biology, artifacts, languages, and cultures across the earth. For Island Southeast Asia, the orthodox Out of Taiwan hypothesis proposes that Neolithic expansion originated from Taiwan with populations moving south into Island Southeast Asia, while the Western Route Migration hypothesis suggests the earliest farming populations entered from Mainland Southeast Asia in the west. These hypotheses are also linked to competing explanations of the Austronesian expansion, one of the most significant population dispersals in the ancient world that influenced human and environmental diversity from Madagascar to Easter Island and Hawai'i to New Zealand. The fundamental archaeological test of the Out of Taiwan and Western Route Migration hypotheses is the geographic and chronological distribution of initial pottery assemblages, but these data have never been quantitatively analyzed. Using radiocarbon determinations from 20 archaeological sites, we present a Bayesian chronological analysis of initial pottery deposition in Island Southeast Asia and western Near Oceania. Both site-scale and island-scale Bayesian models were produced in Oxcal using radiocarbon determinations that are most confidently associated with selected target events. Our results indicate multi-directional Neolithic dispersal in Island Southeast Asia, with the earliest pottery contemporaneously deposited in western Borneo and the northern Philippines. This work supports emerging research that identifies separate processes of biological, linguistic, and material culture change in Island Southeast Asia., Competing Interests: The authors have declared that no competing interests exist. TMR and DF are employed by International Archaeological Research Institute, Inc. (IARII), a private non-profit company. This does not alter our adherence to PLOS ONE policies on sharing data and materials.

Background: Monolithic restorations made of translucent yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) have become popular over the past few decades. However, whether aging affects the color and translucency of monolithic translucent Y-TZP is unclear., Objective: The aim of this systematic review and meta-analysis of in vitro studies was to evaluate the effects of aging on the color and translucency of monolithic translucent Y-TZP ceramics., Materials and Methods: This systematic review/meta-analysis was reported according to the PRISMA statement and registered in the OSF registries (https://osf.io/5qjmu). Four databases including Medline via the PubMed, Embase, and Web of Science databases and the Cochrane Library were searched using no publication year and language limits. The last search was executed on November 20, 2020. In vitro studies comparing the translucency and/or color of monolithic translucent Y-TZP ceramics before and after simulated aging were selected. Meta-analyses were performed using Review Manager software (version 5.3, Cochrane Collaboration, Oxford, UK) with random-effects models at a significance level of 0.05. A risk-of-bias assessment was also performed for the included studies., Results: Of the 188 potentially relevant studies, 13 were included in the systematic review. The hydrothermal aging duration ranged from 1 to 100 h at relatively similar temperatures (~134°C). In the general meta-analyses, the aged Y-TZP ceramics exhibited similar translucency parameter (TP), L ∗ , and b ∗ values compared with the nonaged controls ( P = .73, P = .49, and P = .62, respectively). Moreover, there was a significant difference between the aged and nonaged Y-TZP ceramics in the a ∗ value ( P = .03; MD = -0.26; 95% CI = -0.51 to - 0.02), favoring the nonaged Y-TZP ceramics. The subgroup analyses showed that the duration of aging contributed to changes in the translucency and color of the Y-TZP ceramics., Conclusions: The optical properties of monolithic translucent Y-TZP ceramics were stable after hydrothermal aging at 134°C and 0.2 MPa for ≤20 h. Moreover, clinically unacceptable changes in the translucency and color of monolithic translucent Y-TZP ceramics were found after hydrothermal aging for >20 h., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2021 Chang-yuan Zhang et al.)

A particular type of miniature ceramic vessel locally known as "veneneras" is occasionally found during archaeological excavations in the Maya Area. To date, only one study of a collection of such containers successfully identified organic residues through coupled chromatography-mass spectrometry methods. That study identified traces of nicotine likely associated with tobacco. Here we present a more complete picture by analyzing a suite of possible complementary ingredients in tobacco mixtures across a collection of 14 miniature vessels. The collection includes four different vessel forms and allows for the comparison of specimens which had previously formed part of museum exhibitions with recently excavated, untreated containers. Archaeological samples were compared with fresh as well as cured reference materials from two different species of tobacco (Nicotiana tabacum and N. rustica). In addition, we sampled six more plants which are linked to mind-altering practices through Mesoamerican ethnohistoric or ethnographic records. Analyses were conducted using UPLC-MS metabolomics-based analytical techniques, which significantly expand the possible detection of chemical compounds compared to previous biomarker-focused studies. Results include the detection of more than 9000 residual chemical features. We trace, for the first time, the presence of Mexican marigold (Tagetes lucida) in presumptive polydrug mixtures.

Latest findings suggest that packaging and processing of food may be a contamination source of microplastics. In this study particle abrasion from five different salt mills with grinding burrs made of plastic and ceramic were investigated using micro-Raman (µ-Raman) spectroscopy. The mills were filled with a reference salt and an amount of 0.1 g was milled into a beaker, dissolved, filtered and the residues analysed via µ-Raman spectroscopy in different size classes, beginning with ≥ 1 µm. In the unground reference salt itself 423 ± 161 microplastic particles per 0.1 g were found, mainly consisting of polyethylene terephthalate (PET). These contents were not subtracted from the samples. One of the ceramic grinders also exclusively released PET-particles (527 ± 265 per 0.1 g).The other had compartments of polystyrene (PS) in the milling system and PS particles were found in the ground salt (201 ± 37 PET; 727 ± 226 PS/). Two of the plastic grinders had burrs made of polyoxymethylene (POM) and one with burrs of poly(methyl methacrylate) (PMMA). There were large amounts of 7628 ± 2655 and 5048 + 594 POM particles in 0.1 g salt in the two POM grinders as well as 265 ± 182 and 1546 ± 884 PET particles, respectively; salt from the PMMA grinder had 240 ± 41 PMMA particles/0.1 g and 1643 ± 1174 PET particles. The majority of the PET particles were smaller than 5 µm, whereas the POM, PS and PMMA particles had average sizes greater than 10 µm. In addition to possible microplastic contamination from salt itself, salt mills with grinding burrs made of plastic can emit microplastic particles in large amounts, especially if the burrs are made of POM. Other particles may, however, also be emitted from the grinders, e.g. ceramic particles in a similar size class, leading to the question whether and which kind of particles may be of toxicological concern for humans.

Archaeology has yet to capitalise on the opportunities offered by bioarchaeological approaches to examine the impact of the 11th-century AD Norman Conquest of England. This study utilises an integrated multiproxy analytical approach to identify and explain changes and continuities in diet and foodways between the 10th and 13th centuries in the city of Oxford, UK. The integration of organic residue analysis of ceramics, carbon (δ13C) and nitrogen (δ15N) isotope analysis of human and animal bones, incremental analysis of δ13C and δ15N from human tooth dentine and palaeopathological analysis of human skeletal remains has revealed a broad pattern of increasing intensification and marketisation across various areas of economic practice, with a much lesser and more short-term impact of the Conquest on everyday lifestyles than is suggested by documentary sources. Nonetheless, isotope data indicate short-term periods of instability, particularly food insecurity, did impact individuals. Evidence of preferences for certain foodstuffs and cooking techniques documented among the elite classes were also observed among lower-status townspeople, suggesting that Anglo-Norman fashions could be adopted across the social spectrum. This study demonstrates the potential for future archaeological research to generate more nuanced understanding of the cultural impact of the Norman Conquest of England, while showcasing a method which can be used to elucidate the undocumented, everyday implications of other large-scale political events on non-elites., Competing Interests: The authors have declared that no competing interests exist.

Mediterranean Early Iron Age chronology was mainly constructed by means of Greek Protogeometric and Geometric ceramic wares, which are widely used for chronological correlations with the Aegean. However, Greek Early Iron Age chronology that is exclusively based on historical evidence in the eastern Mediterranean as well as in the contexts of Greek colonisation in Sicily has not yet been tested by extended series of radiocarbon dates from well-dated stratified contexts in the Aegean. Due to the high chronological resolution that is only achievable by (metric-scale) stratigraphic 14C-age-depth modelling, the analysis of 21 14C-AMS dates on stratified animal bones from Sindos (northern Greece) shows results that immediately challenge the conventional Greek chronology. Based on pottery-style comparisons with other sites, the new dates for Sindos not only indicate a generally higher Aegean Early Iron Age chronology, but also imply the need for a revised understanding of the Greek periodisation system that will foreseeably have a major impact on our understanding of Greek and Mediterranean history., Competing Interests: The authors have declared that no competing interests exist.

The detection of organic residues that remain absorbed into the pores of ceramic artifacts constitutes a source of information regarding their management. Taking into account the poor conservation state of the potteries and the low amount of the organic tracers together with the main drawbacks to get the relevant information concerning different aspects of past societies, the detection of organic biomarkers is still an analytical challenge. In this work, an improved analytical methodology to maximize the recovery of organic markers related to wine in archeological ceramics is presented. The developed method consists on the extraction of wine-related organic compounds including tartaric acid, malic acid, fumaric acid, succinic acid, citric acid, and syringic acid by means of ultrasonic probe-assisted extraction (UPAE) followed by a preconcentration step by mixed-mode strong anion exchange and reversed-phase solid-phase extraction (SPE) and a derivatization step prior to analysis by means of gas chromatography-mass spectrometry (GC-MS). Finally, the method was applied to real archeological ceramic fragments (two dolia), suspected to have been used to store wine, together with organic residues found inside two amphorae from Zaragoza (Spain). Graphical abstract.

In addition to the mitigation of carbon emissions through the reduction of building energy consumption, the prevention of fire spread in buildings is important an important task globally. Therefore, a growing interest towards building materials that can simultaneously contribute to energy savings and provide good flame-retardant performance in buildings exist. The flame-retardant performances of buildings can be improved through the use of inorganic building materials during construction. Meanwhile, among the different types of construction waste, more than 70% of ceramics can be recycled, which would reduce carbon emissions in the production process. Ceramics are inorganic and non-flammable, and can thus secure the flame-retardant performance of buildings. In this study, recycled ceramic-based inorganic insulation to secure the flame-retardant performance of a building are analyzed for their energy saving values. A case study building was modeled and the flame-retardant performance and building energy consumption were analyzed. Setting the thermal transmittance of the external wall according to the energy conservation design standards in South Korea, the tradeoff between model calculates annual energy consumption fire protection and minimization of material environmental impacts are discussed. As a result of simulation, when a wall constructed according to the energy conservation design standards of buildings, the building energy was saved by 18.6% and fire resistance performance was secured., (Copyright © 2019 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Seafloor litter has been studied both on the continental shelves (by trawling during 24 years) and in canyons (by ROV) of the French Mediterranean sea Water (FMW). On the continental shelf, mean densities range from 49.63 to 289.01 items/km 2 . The most abundant categories were plastic, glass/ceramics, metals and textiles. Trend analysis shows a significant increase in plastic quantities during the study period. Plastics accumulate at all depths, with heavier items being found in deeper areas, while the continental slope-break appears as a clean area. The spatial distribution of litter revealed the influence of geomorphologic factors, anthropic activities, shipping route, river inputs. All the canyons are affected by debris but coastal canyons (Ligurian Sea and Corsica) were more impacted than offshore canyons in the Gulf of Lion. The FMW appears to be highly polluted with regard to values found in other areas, but lower than those observed in the Eastern Mediterranean., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Mullite, a pure aluminosilicate (Al 6 Si 2 O 13 ), is a rare natural rock component, known for centuries as a very resistant ceramic material. It is also a common waste product of high-temperature coal combustion that is emitted in quantity from coal-based power stations. The occurrence of mullite in two Sphagnum-dominated peatlands located near the Upper Silesia industrial region in southern Poland is described. For the first time, a complete record of mullite deposition in the peat profiles has been obtained by XRD analyses of ashed peat samples. The mullite distribution is compared with records of Hg, Pb and Cu. While mullite is supplied during high temperature processes only, Cu, Pb and Hg show more complex pattern of distribution. Both peat profiles contain elevated amounts of mullite in the time span between ca 1950-1990 with a maximum content in ca 1980. The first appearance (∼1900) of mullite is indicative of the beginning of energy production in coal-based power plants in the region. Mullite is proposed here as an indicator of industrialization in geological records. It is resistant to post-depositional processes, emitted globally, and restricted to large-scale industry., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The rich Mediterranean imports found in Early Celtic princely sites (7th-5th cent. BC) in Southwestern Germany, Switzerland and Eastern France have long been the focus of archaeological and public interest. Consumption practices, particularly in the context of feasting, played a major role in Early Celtic life and imported ceramic vessels have consequently been interpreted as an attempt by the elite to imitate Mediterranean wine feasting. Here we present the first scientific study carried out to elucidate the use of Mediterranean imports in Early Celtic Central Europe and their local ceramic counterparts through organic residue analyses of 99 vessels from Vix-Mont Lassois, a key Early Celtic site. In the Mediterranean imports we identified imported plant oils and grape wine, and evidence points towards appropriation of these foreign vessels. Both Greek and local wares served for drinking grape wine and other plant-based fermented beverage(s). A wide variety of animal and plant by-products (e.g. fats, oils, waxes, resin) were also identified. Using an integrative approach, we show the importance of beehive products, millet and bacteriohopanoid beverage(s) in Early Celtic drinking practices. We highlight activities related to biomaterial transformation and show intra-site and status-related differences in consumption practices and/or beverage processing., Competing Interests: The authors have declared that no competing interests exist.

An additive manufacturing technology is applied to obtain functionally graded ceramic parts. This technology, based on digital light processing/stereolithography, is developed within the scope of the CerAMfacturing European research project. A three-dimensional (3-D) hemi-maxillary bone-like structure is 3-D printed using custom aluminum oxide polymeric mixtures. The powders and mixtures are fully analyzed in terms of rheological behavior in order to ensure proper material handling during the printing process. The possibility to print functionally graded materials using the Admaflex technology is explained in this document. Field-emission scanning electron microscopy (FESEM) show that the sintered aluminum oxide ceramic part has a porosity lower than 1% and no remainder of the original layered structure is found after analysis.

Ceramic fragments and fractionated (<2 mm) sediment have been sampled from two beaches in southwest England, along with sediment from a control beach where ceramic waste was lacking. Analysis of the glazed ceramic surfaces by X-ray fluorescence (XRF) spectrometry returned concentrations of Pb up to 729,000 mg kg -1 , while XRF analysis of sediment samples revealed high but heterogeneous concentrations of Pb at the two sites impacted by ceramic waste (median = 292 and 737 mg kg -1 ) compared with the control beach (median ~ 20 mg kg -1 ). These observations are attributed to the disposal of contemporary and historical ceramic products, and the subsequent attrition of material and contamination of local sediment. Extraction of a milled ceramic composite (Pb = 2780 mg kg -1 ) by 1 M HCl, revealed a high (34%) environmental mobility and availability of Pb; extraction in a solution of protein, however, suggested a low (0.1%) bioaccessibility to sediment-ingesting invertebrates., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

A method has been developed for extracting poppy alkaloids from oily matrices, specifically lipid residues associated with archaeological ceramics. The protocol has been applied to fresh and artificially aged poppyseed oil and to residue from a Late Bronze Age Cypriot juglet in the collections of the British Museum. The juglet is of a type that has been linked with ancient trade in opium due to its poppy-head shape and wide distribution; it is a rare example of an intact vessel with contents sealed inside. Bulk analysis of the residue by GC-EI-MS and pyGC-EI-MS indicated a degraded plant oil and possible presence of papaverine. Analysis of the alkaloid extracts by HPLC-ESI-MS using both triple quadrupole and FTICR mass spectrometers detected the five primary opium alkaloids in fresh poppyseed oil and papaverine in most of the aged samples. Papaverine and thebaine were detected in the juglet residue, providing the first rigorous chemical evidence to support a link between this vessel type and opium, or at least poppies. The association of opium with oil raises new questions about the ancient purpose of the commodities within these vessels, and the low levels (ng g-1) of opiates detected in this unusually well-preserved residue shed doubt on the scope for their detection in more fragmentary ceramic remains (potsherds). Papaverine was found to exhibit challenging carryover behaviour in all the analytical methods used in this study. The phenomenon has not been reported before and should be considered in future analyses of this analyte in all application areas.

RIDA®QUICK Gliadin is an immuno-chromatographic test for the detection of gluten in foods, on surfaces, and in Cleaning-in-Place (CIP) waters. This test kit has been adopted as Final Action AOAC INTERNATIONAL Official Methods of AnalysisSM 2015.16 for gluten in corn products. The assay is based on the monoclonal antibody R5, which recognizes gluten in wheat, barley, and rye. Four different surfaces were contaminated with a gliadin material and analyzed by a direct swabbing of the surface with the dip-stick. The outcome was an LOD95% concentration of the assay between 1.6 and 3.0 μg/100 cm2 gluten. For CIP waters that contain cleansing reagents, 100% positive results were obtained for minimum gluten concentration between 50 and 100 ng/mL. If the CIP water does not contain these reagents, the minimum detectable gluten level is 10 ng/mL. The independent validation study consisted of a method comparison study of recovery from a CIP solution and from a stainless-steel surface. The test kit was evaluated at six different concentration levels for both matrices, with 20 or 30 replicates per concentration level. The probability of detection was calculated for each contamination level. Additionally, the LOD95% concentration was estimated for each matrix analyzed.

Background: Traditional ceramics are a cultural heritage in Mexico, used by the general population in everyday life. These ceramics are glazed with lead oxide and are usually produced in households that share living and working spaces. Glazing is usually performed by women, and children are not restrained from the work space and frequently help, resulting in high levels of lead exposure for all. Interventions that promote a change in technology (such as lead-free glazes or efficient kilns) are often unrealistic for potters with fewer economic resources who depend on their production as their main income. Interventions focusing on exposure prevention (rather than a technology change) at the household level are scarce., Methods: Working hand-in-hand with a group of nine women, lay community workers, promotoras, from Santa Fe de Laguna, Michoacán, we developed a program focusing on the self-recognition of health risks. The program was composed of health education (including a lead in blood and bone measurement for women), health/work risk recognition and communication to the community, and work/living area reorganization and remediation in three stages: work with 1) promotoras, 2) their extended families, and 3) their community, including talks in elementary schools., Results: The promotoras developed and distributed risk communication graphic materials and delivered a lead-awareness talk in the Purhepecha language, in the local primary health-care clinic and three elementary schools. Lead in bone levels had a mean ± SD (min, max) of rotula: 84.8 μg/g ± 68.9 (23.89, 214.2), tibia 93.2 μg/g 81.2 (14.23, 261.21). We implemented safer and cleaner ceramic production in the promotoras workshops.Public Health Relevance: Environmental and occupational exposures can be reduced through programs that are tailored by and for a specific community. When there is no evident alternative technology for safer production, such programs can empower groups and lead to reduced exposure for their children, family and community., Competing Interests: The authors have no competing interests to declare., (© 2018 The Author(s). This is an open-access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC-BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. See http://creativecommons.org/licenses/by/4.0/.)

Refractory ceramic fibers (RCF) have been extensively used for insulation in condensing boilers. The aim of this study was to evaluate the respiratory exposure to these fibers among maintenance heating technicians. We first created a working group (Carsat Brittany and Finistère Occupational Health Services) and carried out a sampling strategy. Atmospheric measurements were done during work tasks, and filters were analyzed by phase contrast microscopy (PCM) and scanning electron microscopy (SEM) in French approved laboratories. Four companies were included for a total of 15 days of work. During those 15 workdays, 12 SEM and 21 PCM samples were taken and analyzed. The phase contrast microscopy and SEM average results were 0.04 and 0.004 fibers/cm 3 , respectively. In conclusion, the study confirms heating technician RCF respiratory exposure during maintenance work for both condensation gas boilers and atmospheric boilers. Collective and individual prevention measures should be implemented along with appropriate medical follow-up.

The aim of this paper is to report the state of current literature and recommendations for the lithium disilicate glass-ceramic IPS e.Max. The materials science, mechanical and optical properties were reviewed. Additionally an assessment was conducted of current implementation recommendations and clinical outcomes. This paper provides a brief historical overview, summary of the findings the findings of current literature, and clinical recommendation for the use of IPS e.Max CAD in dental applications., (Copyright © 2018. Published by Elsevier Taiwan.)

The paper focuses on the analysis of an industrial ceramic kiln in order to improve the energy efficiency and thus the fuel consumption and the corresponding carbon dioxide emissions. A lumped and distributed parameter model of the entire system is constructed to simulate the performance of the kiln under actual operating conditions. The model is able to predict accurately the temperature distribution along the different modules of the kiln and the operation of the many natural gas burners employed to provide the required thermal power. Furthermore, the temperature of the tiles is also simulated so that the quality of the final product can be addressed by the modelling. Numerical results are validated against experimental measurements carried out on a real ceramic kiln during regular production operations. The developed numerical model demonstrates to be an efficient tool for the investigation of different design solutions for the kiln's components. In addition, a number of control strategies for the system working conditions can be simulated and compared in order to define the best trade off in terms of fuel consumption and product quality. In particular, the paper analyzes the effect of a new burner type characterized by internal heat recovery capability aimed at improving the energy efficiency of the ceramic kiln. The fuel saving and the relating reduction of carbon dioxide emissions resulted in the order of 10% when compared to the standard burner., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Modern analytical methods play an important role in archaeological objects, including ceramics. This review focuses on the use of analytical methods such as: gas chromatography coupled mass spectrometry, Fourier transform infrared spectroscopy, time-of-flight secondary ion mass spectrometry (ToF-SIMS), powder X-ray diffraction with thermal analysis to study the chemical and mineralogical composition of archaeological samples and organic residues preserved inside. In this paper, special attention was paid to the ToF-SIMS method, which allows the determination of characteristic ions on the surface of ceramic samples.

The purpose of this study is to analyze the mechanical enhancement provided by nanocomposite coatings deposited on robocast 45S5 bioglass (BG) scaffolds for bone tissue regeneration. In particular, a nanocomposite layer consisting of hydroxyapatite (HA) nanoparticles, as reinforcing phase, in a polycaprolactone (PCL) matrix was deposited onto the surface of the BG struts conforming the scaffold. Three different HA nanopowders were used in this study. The effect of particle size and morphology of these HA nanopowders on the mechanical performance of 45S5 BG scaffolds is evaluated., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

To study the tetragonal-to-monoclinic (T-M) phase transformation behavior under different strain rates and indentation depths, nanoindentation tests were performed on stabilized zirconia ceramics with Continuous Stiffness Measurements. The results indicate decreased phase transformation velocities at both lower and higher strain rates, but increased velocity under medium strain rate during loading. The phase transformation process is sensitive to Ṗ/P but the final volume fractions are almost identical (45%). Furthermore, most of the phase transformation is completed during a short initial time followed by slight linear increase of the M-phase volume fraction with holding time. The phase transformation continuously slowed with increasing indentation depth when indented with a constant strain rate., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The inherent brittleness of bioceramics restricts their applications in load bearing implant, although they possess good biocompatibility and bioactivity. In this study, molybdenum disulfide nanoplatelets (MSNPs) were used to reinforce bioceramics (Mg 2 SiO 4 /CaSiO 3 ) scaffolds fabricated by selective laser sintering (SLS). The fracture mode of scaffolds was transformed from transgranular to mixed trans- and intergranular. It could be explained that MSNPs could slide easily due to their weak interlayer van der Waals interactions and provide elastic deformation due to their high elastic modulus. Such sliding action and elastic deformation synergistically induced crack bridging, crack deflection, pull-out and break of MSNPs. Those effects effectively increased the fracture energy dissipation and strain capacity as well as changed the fracture mode, contributing to high fracture toughness and compression strength. Additionally, the scaffolds with MSNPs not only formed a bioactive apatite layer in simulated body fluid, but also supported cell adhesion and proliferation., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Polymer infiltrated ceramic network (PICN) materials exhibit desirable properties for replacement of tooth structure. However, their durability and their integrity in various oral environments, remain relatively unknown. The primary objective of this study is to investigate the effect of acidic agents on the wear behavior of PICNs. Twenty specimens were randomly assigned to four groups and then immersed in either deionized water (control) or acidic agents (2% acetic acid, citric acid or lactic acid solutions) at 37℃ for 4 weeks. Changes in the surface microhardness (SMH) and roughness were measured. Reciprocating wear tests were performed under artificial saliva to 10,000 cycles, and the coefficient of friction (COF) and wear depth were quantified to assess the wear behavior. Scanning electron microscopy (SEM) was used to analyze the wear morphology. Acid erosion decreased the SMH and increased surface roughness of the PICN, especially in lactic acid solution. For less than 2800 cycles, the acetic acid and citric acid groups showed higher COF and wear depths due to combined ceramic and polymer wear; the lactic acid group showed smaller COF and wear depth, due to a wear debris layer that acted as solid lubricant. Beyond 2800 cycles, all four groups exhibited similar COF values, as well as wear depth and wear morphology. Overall, acid erosion had a significant effect on the surface wear history of the PICN, but no effect on its long-term wear properties. Overall, the depth of acidic degradation of the PICN was rather limited., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Coefficient of friction (COF) tests were conducted on 28-mm and 36-mm-diameter hip joint prostheses for four different material combinations, with or without the presence of Ultra High Molecular Weight Polyethylene (UHMWPE) particles using a novel pendulum hip simulator. The effects of three micro dimpled arrays on femoral head against a polyethylene and a metallic cup were also investigated. Clearance played a vital role in the COF of ceramic on polyethylene and ceramic on ceramic artificial hip joints. Micro dimpled metallic femoral heads yielded higher COF against a polyethylene cup; however, with metal on metal prostheses the dimpled arrays significantly reduced the COF. In situ images revealed evidence that the dimple arrays enhanced film formation, which was the main mechanism that contributed to reduced friction., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Ceramic pot filter (CPF) technology is a relatively common means of household water treatment in developing areas, and performance characteristics of CPFs have been characterized using production CPFs, experimental CPFs fabricated in research laboratories, and ceramic disks intended to be CPF surrogates. There is evidence that CPF manufacturers do not always fire their products according to best practices and the result is incomplete combustion of the pore forming material and the creation of a carbon core in the final CPFs. Researchers seldom acknowledge the existence of potential existence of carbon cores, and at least one CPF producer has postulated that the carbon may be beneficial in terms of final water quality because of the presence of activated carbon in consumer filters marketed in the Western world. An initial step in characterizing the presence and impact of carbon cores is the characterization of those cores. An optical method which may be more viable to producers relative to off-site laboratory analysis of carbon content has been developed and verified. The use of the optical method is demonstrated via preliminary disinfection and flowrate studies, and the results of these studies indicate that the method may be of use in studying production kiln operation.

The aim of the present study was to evaluate the influence of intra-oral aging on the tetragonal-to-monoclinic (t→m) phase transformation of two Y-TZP dental ceramics - Lava Frame (Frame) and Lava Plus (Plus) - and determine the impact of this response on their microstructures and mechanical properties: flexural strength, Young's modulus, microhardness and fracture toughness. Standardized ceramic specimens were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). After the baseline analysis, the specimens were attached to personalized intra-oral resin appliances and exposed to the oral cavity of 20 subjects for 60 days and then analyzed again. Specimens produced for mechanical properties evaluation were also analyzed before and after the 60-day intra-oral aging. The data were analyzed using two-way ANOVA and Tukey HSD's post hoc test (α=0.05). Weibull analysis was used to evaluate the strength reliability. Both Y-TZP ceramics suffered t→m phase transformation after 60-day intra-oral aging (Plus=4.7%/Frame=7.7%). SEM and AFM analyses showed dislodgement of ZrO 2 grains and a significant increase in roughness after intra-oral aging for both ceramics. Both Y-TZP ceramics suffered a decrease on flexural strength, Young's modulus and fracture toughness after intra-oral aging (p<0.05). Only Plus presented a decrease of microhardness after intra-oral aging (p<0.05). Intra-oral aging for 60 days produced t→m phase transformation, changed the microstructure and decreased the mechanical properties of two Y-TZP dental ceramics., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Statement of Problem: A novel esthetic porcelain characterization technique involves mixing an appropriate amount of ceramic colorants with clear, low-fusing porcelain (LFP), applying the mixture on the external surfaces, and firing the combined components onto the surface of restorations in a porcelain oven. This method may provide better esthetic qualities and toothbrush abrasion resistance compared to the conventional techniques of applying color-corrective porcelain colorants alone, or applying a clear glaze layer over the colorants. However, there is no scientific literature to support this claim., Purpose: This research evaluated toothbrush abrasion resistance of a novel porcelain esthetic characterization technique by subjecting specimens to various durations of simulated toothbrush abrasion. The results were compared to those obtained using the conventional characterization techniques of colorant application only or colorant followed by placement of a clear over-glaze., Method and Materials: Four experimental groups, all of which were a leucite reinforced ceramic of E TC1 (Vita A1) shade, were prepared and fired in a porcelain oven according to the manufacturer's instructions. Group S (stain only) was characterized by application of surface colorants to provide a definitive shade of Vita A3.5. Group GS (glaze over stain) was characterized by application of a layer of glaze over the existing colorant layer as used for Group S. Group SL (stain+LFP) was characterized by application of a mixture of colorants and clear low-fusing add-on porcelain to provide a definitive shade of Vita A3.5. Group C (Control) was used as a control without any surface characterization. The 4 groups were subjected to mechanical toothbrushing using a 1:1 water-to-toothpaste solution for a simulated duration of 32 years of clinical use. The amount of wear was measured at time intervals simulating every 4 years of toothbrushing. These parameters were evaluated longitudinally for all groups as well as compared at similar time points among groups., Results: In this study, the novel external characterization technique (stain+LFP: Group SL) did not significantly enhance the wear resistance against toothbrush abrasion. Instead, the average wear of the applied extrinsic porcelain was 2 to 3 times more than Group S (stain only) and Group GS (glaze over stain). Application of a glaze layer over the colorants (Group GS) showed a significant improvement on wear resistance. Despite its superior physical properties, the leucite reinforced ceramic core (Group C) showed 2 to 4 times more wear when compared with other test groups., Conclusion: A conventional external esthetic characterization technique of applying a glaze layer over the colorants (Group GS) significantly enhanced the surface wear resistance to toothbrush abrasion when compared with other techniques involving application of colorants only (Group S) or mixture of colorant and LFP (Group SL). The underlying core ceramic had significantly less wear resistance compared with all externally characterized specimens. The novel esthetic characterization technique showed more wear and less color stability, and is thus not advocated as the "best" method for surface characterization., Clinical Implications: Application of a glaze layer provides a more wear-resistant surface from toothbrush abrasion when adjusting or extrinsically characterizing leucite reinforced ceramic restorations. Without the glaze layer, the restoration is subjected to a 2 to 4 times faster rate and amount of wear leading to possible shade mismatch.

Anthrosols known as Amazonian Dark Earth (ADE) have borne witness to the intensification of sedentary patterns and the demographic increase in Central Amazon. As a result, a recurring pattern has been observed of mounds with ADE arising from domestic activities and the disposal of waste. The objective of this research was to demonstrate the relationship of these anthropic activities with pedogenetic formation processes of ADE in the municipality of Iranduba, Brazil. Disturbed and undisturbed soil samples were taken from two areas of ADE (pretic horizon) and from a non-anthropic pedon. Physical, chemical, micromorphological and SEM-EDS analyses were performed. The coarse material of the pretic horizons consisted predominantly of quartz, iron nodules, ceramics and charcoal fragments, and the fine material is organo-mineral. There was a direct relationship between the color of pretic horizons and the number of charcoal fragments. The thickness of the ADE results from the redistribution of charcoal at depth through bioturbation, transforming subsurface horizons into anthropic horizons. ADE presents granular microaggregates of geochemical and zoogenetic origin. Degradation of iron nodules is intensified in pretic horizons, promoting a reverse pedogenic process contributing to the xanthization process. Surprisingly the anthropic activities also favor clay dispersion and argilluviation; clay coatings on the ceramic fragments and in the pores demonstrate that this is a current process. Processes identified as contributing to ADE genesis included: i) addition of organic residues and ceramic artifacts (cumulization) with the use of fire; ii) mechanical action of humans, roots and macrofauna (bioturbation); iii) melanization of deeper horizons as a result of bioturbation; iv) argilluviation and degradation of iron nodules. This study offers new support to archaeological research in respect to ADE formation processes in Central Amazon and confirmed the hypothesis that ancient anthropic activities may trigger and/or accelerate pedogenetic processes previously credited only to natural causes.

In our previous study, we developed Mg-matrix composites with bredigite as the reinforcing phase and achieved improved degradation resistance in comparison with Mg. However, the effects of materials processing method and process parameters on the mechanical behavior of the composites before and during degradation were still unknown. This research was aimed at determining the mechanical properties of Mg-bredigite composites prior to and during degradation. It was found that by optimizing the process parameters of Pressure Assisted Sintering (PAS), low-porosity Mg-bredigite composites with strong interfaces between homogeneously distributed bredigite particles and the Mg matrix could be fabricated. By reinforcing Mg with 20vol% bredigite particles, the ultimate compressive strength and ductility of Mg increased by 67% and 111%, respectively. The in vitro degradation rate of the Mg-20% bredigite composite in a cell culture medium was 24 times lower than that of monolithic Mg. As a result of retarded degradation, the mechanical properties of the composite after 12 days of immersion in the cell culture medium were comparable to those of cortical bone. The encouraging results of this research warrant further investigations on the in vivo degradation behavior and mechanical properties of the composites., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

This work describes the outcomes of the COST Action-TU1301 "NORM4Building" intercomparison on the determination of natural radioactivity in ceramics. Twenty-two laboratories involved in the intercomparison are evaluated for their performance using robust statistics. The reference values of 226 Ra ( 214 Bi and 214 Pb) are determined to be 122 ± 11 Bq kg -1 and 124 ± 14 Bq kg -1 , respectively and in secular equilibrium in the uranium chain while the reference values of 232 Th ( 228 Ac) is determined to be 61 ± 6 Bq kg -1 and that of 40 K was determined to be 955 ± 40 Bq kg -1 . Although the aim of the exercise was to determine the activity concentration of 226 Ra, 232 Th and 40 K and evaluation of the "Activity Concentration Index", laboratories were asked to report complete characterization of natural radionuclides. The results of this exercise pointed out a good performance among laboratories since the percentage of the acceptable results were above 90% for the radionuclides of interest. Based on these results, considering the systematic rejection of the results reported from a few laboratories we emphasize the need for quality control procedures., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

This paper analyzes the significant scientific publications worldwide for the last 15years concerning construction ceramics (predominantly brick) made with various inorganic industrial wastes added to the ceramic raw material for the improvement of properties and for eco-friendly disposal. The information gap resulting from the lack of mentions of the Russian publications on this subject in English-language reviews is filled. The paper includes brief summaries of 34 dissertations and 29 patents issued in Russia since 2000. The waste additives described in these summaries are grouped by origin type (mining industry waste, ore enrichment waste, metallurgical waste, sludge, ashes, cullet, large-capacity building wastes and waste from various chemical production processes) with the ceramic mixture compositions, molding and firing conditions, final strength, water absorption and other parameters of the final ceramic samples reported. Russian scientists have expanded the nomenclature of each group of wastes significantly upon addition to the list described in English-language reviews for 2000-2015. References to the recent Russian developments in the field of ecological management in ceramic industry are provided., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Locally manufactured ceramic water filters are one effective household drinking water treatment technology. During manufacturing, silver nanoparticles or silver nitrate are applied to prevent microbiological growth within the filter and increase bacterial removal efficacy. Currently, there is no recommendation for manufacturers to test silver concentrations of application solutions or filtered water. We identified six commercially available silver test strips, kits, and meters, and evaluated them by: (1) measuring in quintuplicate six samples from 100 to 1,000 mg/L (application range) and six samples from 0.0 to 1.0 mg/L (effluent range) of silver nanoparticles and silver nitrate to determine accuracy and precision; (2) conducting volunteer testing to assess ease-of-use; and (3) comparing costs. We found no method accurately detected silver nanoparticles, and accuracy ranged from 4 to 91% measurement error for silver nitrate samples. Most methods were precise, but only one method could test both application and effluent concentration ranges of silver nitrate. Volunteers considered test strip methods easiest. The cost for 100 tests ranged from 36 to 1,600 USD. We found no currently available method accurately and precisely measured both silver types at reasonable cost and ease-of-use, thus these methods are not recommended to manufacturers. We recommend development of field-appropriate methods that accurately and precisely measure silver nanoparticle and silver nitrate concentrations.

Ceramic pot filters (CPFs) are an effective means of household water treatment, but the characterization of CPF lifetimes is ongoing. This paper describes a lifetime field study in Guatemala which was made possible by a collaboration between researchers, CPF-using households, and local non-governmental organizations (NGOs). Disinfection data were collected periodically for two years using field coliform enumeration kits as were flow rate data with the assistance of NGO staff. Consumer acceptance was characterized by surveying householders in the four subject villages at the beginning and end of the study. Flow rate data showed that average CPF flow rates decreased below the recommended minimum of 1 L h -1 after 10 months of use; however, the survey results indicated that the consumers were tolerant of the lower flow rates, and it is reasonable to assume that the daily volume of treated water can be readily increased by refilling the CPFs more frequently. Of greater concern was the finding that disinfection efficacy decreased below the recommended bacterial reduction after 14 months of use because it would not be obvious to users that effectiveness had declined. Finally, the follow-up visits by the researchers and the NGO staff appeared to increase consumer acceptance of the CPFs.

In this study, the mechanical properties of porous glass-ceramic scaffolds are investigated by means of three-dimensional finite element models based on micro-computed tomography (micro-CT) scan data. In particular, the quantitative relationship between the morpho-architectural features of the obtained scaffolds, such as macroscopic porosity and strut thickness, and elastic properties, is sought. The macroscopic elastic properties of the scaffolds have been obtained through numerical homogenization approaches using the mechanical characteristics of the solid walls of the scaffolds (assessed through nanoindentation) as input parameters for the numerical simulations. Anisotropic mechanical properties of the produced scaffolds have also been investigated by defining a suitable anisotropy index. A comparison with morphological data obtained through the micro-CT scans is also presented. The proposed study shows that the produced glass-ceramic scaffolds exhibited a macroscopic porosity ranging between 29% and 97% which corresponds to an average stiffness ranging between 42.4GPa and 36MPa. A quantitative estimation of the isotropy of the macroscopic elastic properties has been performed showing that the samples with higher solid fractions were those closest to an isotropic material., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

This study aimed to determine the effects of grinding and low temperature aging on the biaxial flexural strength, structural reliability (Weibull analysis), surface topography, roughness analysis, and phase transformation (t→m) of an yttrium-stabilized tetragonal zirconia polycrystalline ceramic. Ceramic discs (15.0×1.2±0.2mm, VITA In-Ceram YZ) were prepared and randomly assigned into six groups according to 2 factors (n=30): 'grinding' (Ctrl - without treatment, as-sintered; Xfine - grinding with extra fine diamond bur - 30µm; Coarse - grinding by coarse diamond bur - 151µm), and 'aging' (without or with aging: Ctrl LTD ; Xfine LTD ; Coarse LTD ). Grinding was performed in an oscillatory motion with a contra-angle handpiece under constant water-cooling. Low temperature degradation (LTD) was simulated in an autoclave at 134°C, under 2bar pressure, for 20h. The roughness (R a and R z parameters) significantly increased after grinding in accordance with bur grit-size (Coarse>Xfine>Ctrl), and aging promoted distinct effects (Ctrl=Ctrl LTD ; Xfine>Xfine LTD ; Coarse=Coarse LTD ). Grinding increased the m-phase, and aging led to an increase in the m-phase in all groups. However, different susceptibilities to LTD were observed. Weibull analysis showed a significant increase in the characteristic strength after grinding (Coarse=Xfine>Ctrl), while aging did not lead to any deleterious impact. Neither grinding nor aging resulted in any deleterious impact on material reliability (no statistical decrease in the Weibull moduli). Thus, neither grinding nor aging led to a deleterious effect on the mechanical properties of the evaluated Y-TZP ceramic although a high m-phase content and roughness were observed., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A calculation model for determining the indoor dose due to building materials with significant concentration of radioactivity has been applied to the case study of ceramic tiles; the model allows the contribution of bearing walls and wall covering materials to be calculated. The model is implemented in FORTRAN 77 and provides a quantification of the gamma radiation field (in terms of external dose rate in air, nGyh -1 ) inside a room with known dimensions. Application model results have been validated both by comparison with the results obtained by other authors and by experimental measurements. Model sensitivity and performances have been analysed and lastly the case studies focused on ceramic tiles have been proposed., (© The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

Two markers of regional exchange in the Eastern Mediterranean during the first millennium BCE are the White Painted and Bichrome Wares from Cyprus's Cypro-Geometric and Cypro-Archaic periods. Although these ceramics are often assumed to be imports from Cyprus, excavations in southern Turkey at sites such as Tarsus-Gözlükule, Kilise Tepe, Sirkeli Höyük, and Kinet Höyük suggest that at least some of this pottery was produced locally, requiring a major revision of our understanding of economic interaction in the Eastern Mediterranean. We employ a combination of portable x-ray fluorescence and neutron activation analysis to investigate the White Painted and Bichrome Wares recovered from Tell Tayinat, Çatal Höyük, and Tell Judaidah, three sites in the Amuq Valley of southeastern Anatolia. Our results demonstrate that a clear geochemical distinction exists between imported and local versions of this pottery. Through comparison with legacy datasets, we locate the likely origin of the imported pottery in the Circum-Troodos sediments of central and southern Cyprus. The secondary and tertiary settlements of Çatal Höyük and Tell Judaidah had access only to this imported material. In contrast, the inhabitants of Tell Tayinat, capital city of the region, consumed both imported and locally produced White Painted and Bichrome Wares. This pattern cannot be explained in purely economic terms whereby the frequency of imports decreases as distance from the point of production increases. Instead, we suggest that elite feasting practices drove demand, resulting in either local potters producing Cypriot-style pottery or Cypriot potters settling in the vicinity of Tell Tayinat. These findings offer new insights into the relationship between historically attested Iron Age kingdoms in southern Turkey and Cyprus and complicate our understanding of exchange in the Eastern Mediterranean during the Iron Age., Competing Interests: The authors have declared that no competing interests exist.

The aim of this study was to systematically review the literature to assess the effect of grinding on the mechanical properties, structural stability and superficial characteristics of Y-TZP ceramics. The MEDLINE via PubMed and Web of Science (ISI - Web of Knowledge) electronic databases were searched with included peer-reviewed publications in English language and with no publication year limit. From 342 potentially eligible studies, 73 were selected for full-text analysis, 30 were included in the systematic review with 20 considered in the meta-analysis. Two reviewers independently selected the studies, extracted the data, and assessed the risk of bias. Statistical analyses were performed using RevMan 5.1, with random effects model, at a significance level of 0.05. A descriptive analysis considering phase transformation, Y-TZP grain size, Vickers hardness, residual stress and aging of all included studies were executed. Four outcomes were considered in the meta-analyses (factor: grinding x as-sintered) in global and subgroups analyses (grinding tool, grit-size and cooling) for flexural strength and roughness (Ra) data. A significant difference (p<0.05) was observed in the global analysis for strength, favoring as-sintered; subgroup analyses revealed that different parameters lead to different effects on strength. In the global analysis for roughness, a significant difference (p<0.05) was observed between conditions, favoring grinding; subgroup analyses revealed that different parameters also lead to different effects on roughness. High heterogeneity was found in some comparisons. Generally grinding promotes decrease in strength and increase in roughness of Y-TZP ceramics. However, the use of a grinding tool that allows greater accuracy of the movement (i.e. contra angle hand-pieces coupled to slowspeed turbines), small grit size (<50μm) and the use of plenty coolant seem to be the main factors to decrease the defect introduction and allow the occurrence of the toughening transformation mechanism, decreasing the risk of deleterious impact on Y-TZP mechanical properties., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Bioceramic derived from chicken feces (BCX) is a material produced by a sintering process for the purpose of use in animal farms to control livestock infectious diseases. In the present study, BCX at pH 13 was evaluated for the durability of its virucidal activity in simulated field conditions. First it was shown that BCX had activity toward Newcastle disease virus, infectious bursal disease virus, and goose parvovirus within 3 min and toward avian influenza virus (AIV) within 1 hr. BCX was further tested by keeping it under simulated harsh environmental conditions with sunlight for several weeks as well as by repeatedly soaking it with water and drying under sunlight many times. After sampling every 2 consecutive weeks and every 2 (of 9) consecutive resuspensions, BCX was evaluated for its efficacy against AIV. Evaluation under the harsh conditions illustrated that BCX could retain its satisfactory efficacy toward AIV throughout 7 wk and through 9 resuspensions. It is hence concluded that BCX is an excellent material for applying in livestock farming as a trapping disinfectant, due to its efficacy to inactivate various viruses, and that this efficacy is prolonged even under harsh environmental conditions.