Search

Stropharia rugosoannulata has been used in environmental engineering to degrade straw in China. The nitrogen and carbon metabolisms are the most important factors affecting mushroom growth, and the aim of this study was to understand the effects of different nitrogen levels on carbon metabolism in S. rugosoannulata using transcriptome analysis. The mycelia were highly branched and elongated rapidly in A3 (1.37% nitrogen). GO and KEGG enrichment analyses revealed that the differentially expressed genes (DEGs) were mainly involved in starch and sucrose metabolism; nitrogen metabolism; glycine, serine and threonine metabolism; the MAPK signaling pathway; hydrolase activity on glycosyl bonds; and hemicellulose metabolic processes. The activities of nitrogen metabolic enzymes were highest in A1 (0.39% nitrogen) during the three nitrogen levels (A1, A2 and A3). However, the activities of cellulose enzymes were highest in A3, while the hemicellulase xylanase activity was highest in A1. The DEGs associated with CAZymes, starch and sucrose metabolism and the MAPK signaling pathway were also most highly expressed in A3. These results suggested that increased nitrogen levels can upregulate carbon metabolism in S. rugosoannulata. This study could increase knowledge of the lignocellulose bioconversion pathways and improve biodegradation efficiency in Basidiomycetes. [ABSTRACT FROM AUTHOR]

Lignin can affect the enzymatic hydrolysis efficiency of lignocellulose. In this study, the lignin isolated from sugarcane bagasse (SCB) pretreated with p-toluenesulfonic acid (PL) was firstly aminated, and then the effects of PL and aminated PL (APL) on the bagasse enzymatic hydrolysis efficiency (EHE) were investigated. The results showed that the addition of PL and APL promoted the EHE, and EHE with APL (73.82 %) was higher than PL (51.39 %). To explore the reason, the data were further analyzed including cellulase adsorption capacity, enzyme activity, cellulase-lignin interaction, and molecular docking. It was found that APL adsorbed more cellulase (27.83 mg protein/g lignin) than PL (4.96 mg protein/g lignin), resulting from the greater interaction force and lower binding free energy between APL and cellulase. The addition of APL more remarkably enhanced the cellobiohydrolase and endoglucanase activities than PL due to more effectively inducing cellulase conformation optimization., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The mechanical pulp industry is diversifying through the manufacture of high-value paper products, such as microfibrillated cellulose. However, the development of fibre quality is still energy-intensive. Enzymatic hydrolysis is hypothesized to promote fibre cutting, greater fibrillation, and reduce refining energy costs. Despite potential benefits, there is little understanding of the mechanisms behind fibre development during enzymatic hydrolysis of mechanical pulp. This work investigates how incubation pH and temperature during enzymatic hydrolysis impact the refining of mechanical pulp short fibres. Incubation with endoglucanase at pH 5 and 60 °C increased fibre cutting by approximately 20 %. Fibrillation was negatively affected at this condition, resulting in increased slim fines formation with refining. Incubation at pH 8 and 80 °C promoted >15 % reduction in fibre length, despite such conditions being associated with low enzyme activity. The pH variation modified the sedimentation height of the fibres and the conductivity of suspensions, indicating a change in fibre surface charge. Fibre morphology changes were induced by enzyme hydrolysis conducted at conditions representative of the full range of pH and temperature observed in mechanical pulp mills., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Heather Trajano reports financial support was provided by Natural Sciences and Engineering Research Council of Canada. Santiago Reynoso reports financial support was provided by Mitacs Canada. Shryia Rambia reports financial support was provided by Mitacs Canada. Heather Trajano reports equipment, drugs, or supplies was provided by West Fraser Timber Company Ltd. Heather Trajano reports equipment, drugs, or supplies was provided by AB Enzymes GmbH. Heather Trajano reports equipment, drugs, or supplies was provided by Canfor Pulp Innovation. Heather Trajano has patent #US 11,608,596 B2 issued to Domtar Paper Company, LLC and The University of British Columbia. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Biofilm-mediated Salmonella enterica serovar Typhi (Salmonella Ser. Typhi) infections are a growing global health issue due to the formation of antibiotic resistance. The study aimed to discover some of the druggable target proteins of Salmonella Ser. Typhi biofilm and antibiofilm enzyme to prevent Salmonella Ser. Typhi biofilm-mediated infection. Enzymatic therapy has demonstrated effective therapeutic results against bacterial infections due to its specificity and high binding capacity to the target. Therefore, this study focused on the computational interaction between the cellulase enzyme and Salmonella Ser. Typhi biofilm targets proteins with help of the various computational experiments such as ADMET (absorption, distribution, metabolism, excretion, and toxicity), protein-protein interactions, MMGBSA, etc. Further, in vitro validations of the typhoidal biofilm and cellulose presence in Salmonella Ser. Typhi biofilm was conducted using Scanning Electron Microscopy (SEM), Fourier transform infrared spectroscopy, and Raman analysis. Additionally, a minimum biofilm inhibitory concentration assay for cellulase was conducted and find out the optimized cellulase concentration which showed its inhibitory effect on the Salmonella Ser. Typhi. The cellulase antibiofilm effect was analyzed with the help of SEM analysis. Further, the cellulose content in Salmonella Ser. Typhi was quantified before and after treatment of cellulase enzyme. As a result, 58.82 % cellulose content was decreased due to cellulase treatment in Salmonella Ser. Typhi. From the seven selected typhoidal biofilm regulatory proteins of Salmonella Ser. Typhi, we identified only five potential druggable targets: BcsA, CsgE, OmpR, CsgF, and CsgD. The BcsA protein is responsible for cellulose production in Salmonella Ser. Typhi biofilm. Consequently, cellulose worked as a fascinating drug target in Salmonella Ser. Typhi biofilm. Therefore, we used cellulase as a potential antibiofilm enzyme for target-based disruption of biofilm. The cellulase showed a high binding affinity with all five identified target proteins [BcsA(-205.62 kcal/mol) > CsgE(-108.20 kcal/mol) > OmpR(-107.58 kcal/mol) > CsgF(-73.74 kcal/mol) > CsgD(-66.61 kcal/mol)] in the protein-protein interaction analysis. Our computational analysis suggests that the cellulase enzyme may be used as a potential antibiofilm enzyme against Salmonella Ser. Typhi biofilm., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The cost of enzymolysis is a major bottleneck for the industrialisation of lignocellulosic enzymatic hydrolysis technology, and recycling cellulase can reduce this cost. Herein, a sulfobetaine prepolymer (CPS) with terminal chlorine was grafted onto enzymatic hydrolysis residual lignin (EHL) from corncob to construct thermosensitive lignin-based "molecular glues" (lignin-based sulfobetaine polymers, L-CPS) that were used to recover and recycle cellulase. L-CPS 2 (1.0 g/L) was added to the corncob residue (CCR) enzymolysis system (50 °C, pH 4.5). After hydrolysis, L-CPS 2 co-precipitated with cellulase through hydrophobic binding when cooling to 25 °C. This co-precipitation decreased the amount of cellulase by 40 %. In summary, a thermally responsive lignin-based molecular glue was constructed for green recycling of cellulase, providing a new approach to decreasing the cost of lignocellulosic enzymolysis and high value utilisation of industrial lignin., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

An innovative binary biol-based deep eutectic solvent (DES), specifically ethylamine hydrochloride-ethylene glycol (EaCl-EG), was developed for efficient pretreatment of eucalyptus biomass. This DES exhibited superior performance in achieving high delignification (85.0%) and xylan removal (80.0%), while preserving a significant amount of cellulose (94.5%) compared to choline chloride-based DES. Notably, the pretreated eucalyptus residues showed a remarkable glucose yield of over 92.5%, representing a substantial enhancement of up to 15 times compared to untreated eucalyptus. Furthermore, the pretreated liquor yielded high-purity lignin with a yield of 97.8%, characterized by well-preserved β-O-4 structure and nanoscale dimensions. These lignin nanoparticles (LNPs) were subsequently self-assembled into lignin nanobottles (LNBs), adding further value to the pretreatment process. The proposed novel binary EaCl-EG DES presented great potential as an efficient pretreatment solvent for future biomass fractionation processes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Castor stalk from hemp plants is an attractive lignocellulosic feedstock for biomass refining valorization due to its similar chemical composition to hardwoods. In this study, the castor stalk fibers were pretreated with efficient dual-functional ethanolamine to achieve delignification and swelling of the cellulosic fibers, followed by cellulase enzymatic digestion for biomass conversion. Experimental results showed that ethanolamine pretreatment at 160 °C for 1 h effectively removed 69.20 % of lignin and 43.18 % of hemicellulose. In addition to efficient delignification and removal of hemicellulose, the study also revealed that supramolecular structure of cellulose was another major factor affecting enzymatic hydrolysis performance. The lowered crystallinity (60-70 %) and swelled crystal sizes (2.95-3.04 nm) promoted enzymatic hydrolysis efficiency during the heterogeneous reaction process. Under optimal conditions (160 °C, 1 h; enzyme loading: 15 FPU/g substrate), promoted yields of 100 % glucose and over 90 % xylose were achieved, which were significantly higher than those obtained from untreated castor stalk. These findings highlighted the effectiveness of the dual-functional ethanolamine pretreatment strategy for efficient bioconversion of lignocellulosic feedstocks. Overall, this study provides valuable insights into the development of new strategies for the efficient utilization of biomass resources, which is essential for the sustainable development of our society., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Sophorose is the most effective inducer for cellulase production by Trichoderma reesei. Currently, the biosynthesis of sophorose is very inefficient, resulting in that unavailable for cellulase production in industry. In this study, CoGH1A, a multifunctional thermophilic glycoside hydrolase, was employed for sophorose production. Under the optimized conditions, the sophorose yield was 37.86 g/L with a productivity of 9.47 g/L/h which is by far the highest productivity. Meanwhile, the Fe 3 O 4 -CS-THP-CoGH1A nanoparticles were constructed to realize the recycling of CoGH1A. After 5 cycles of catalysis, Fe 3 O 4 -CS-THP-CoGH1A retained about 83.90 % enzyme activity. Finally, the mixtures of glucose and disaccharides (MGDC) obtained after being catalyzed by CoGH1A was used for cellulase production. As a result, the cellulase productivity achieved 188.38 FPU/L/h in 120 h. These results indicated that sophorose could be efficiently produced from glucose via transglycosylation by CoGH1A, making it possible to be industrially used as the inducer to improving the cellulase productivity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Clostridium butyricum has emerged as a promising candidate for both industrial and medical biotechnologies, underscoring the key pursuit of stable gene overexpression in engineering C. butyricum. Unlike antibiotic-selective vectors, native-cryptic plasmids can be utilized for antibiotic-free expression systems in bacteria but have not been effectively exploited in C. butyricum to date. This study focuses on leveraging these plasmids, pCB101 and pCB102, in C. butyricum DSM10702 for stable gene overexpression without antibiotic selection via efficient gene integration using the SacB-based allelic exchange method. Integration of reporter IFP2.0 and glucuronidase generated sustained near-infrared fluorescence and robust enzyme activity across successive subcultures. Furthermore, successful secretion of a cellulase, Cel9M, and the human interleukin 10 from pCB102 highlights native-cryptic plasmids' potential in conferring stable gene products for industrial and medical applications in C. butyricum. This work appears to be the first study to harness the Clostridium native-cryptic plasmid for stable gene overexpression without antibiotics, thereby advancing the biotechnological prospects of C. butyricum., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests. Philippe Lambin reports a relationship with Radiomics SA that includes: equity or stocks and funding grants. Philippe Lambin reports a relationship with Convert Pharmaceuticals SA that includes: equity or stocks and funding grants. Philippe Lambin reports a relationship with LivingMed Biotech srl that includes: equity or stocks and funding grants. Philippe Lambin reports a relationship with BHV srl that includes: consulting or advisory and travel reimbursement. Philippe Lambin reports a relationship with Roche that includes: consulting or advisory and travel reimbursement. Philippe Lambin reports a relationship with Comunicare SA that includes: equity or stocks. Philippe Lambin reports a relationship with Bactam srl that includes: equity or stocks. Ludwig J. Dubois reports a relationship with Convert Pharmaceuticals SA that includes: equity or stocks. Ludwig J. Dubois reports a relationship with LivingMed Biotech srl that includes: equity or stocks. Jan Theys reports a relationship with Convert Pharmaceuticals SA that includes: equity or stocks. Yanchao Zhang has patent pending to Maastricht University. Jan Theys has patent pending to Maastricht University. Philippe Lambin has patent pending to Maastricht University. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier GmbH.. All rights reserved.)

The production of cellulolytic enzymes in response to inducible carbon sources is mainly regulated at the transcriptional level in filamentous fungi. We have identified a cellobiose-response regulator (ClbR) controlling the expression of cellulolytic enzyme-encoding genes in Aspergillus aculeatus. However, the engineering potential of combining the deletion of transcriptional repressors with the overexpression of transcriptional activators to enhance enzyme production has not been analyzed. Here, we investigated the effect of the deletion of the transcriptional repressor creA and the overexpression of the transcriptional activator clbR in enzyme production in A. aculeatus. Here, we verified that a combination of creA deletion and clbR overexpression (Δc&OE) improved cellulase, β-1,4-xylanase, and β-glucosidase production. Cellulase and β-1,4-xylanase production increased 3.4- and 8.0-fold in Δc&OE compared with the host strain (MR12) at 96-h incubation, respectively. β-Glucosidase production in ΔcreA and Δc&OE increased approximately 5.0-fold compared with that in MR12 at 240-h incubation. Transcriptional analysis revealed that the increase in enzyme production was due to increased expression of cellobiohydrolase, endo-β-1,4-glucanase, β-1,4-xylanase, and β-glucosidase 1 (bgl1). Interestingly, bgl1 expression in ΔcreA increased in a dose-dependent manner in response to glucose. Thus, combinational manipulation of transcription factors improved cellulase, xylanase, and β-glucosidase production in A. aculeatus., (Copyright © 2024 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.)

To harness the diverse industrial applications of cellulase, including its use in the food, pulp, textile, agriculture, and biofuel sectors, this study focused on the high-yield production of a bioactive insect-derived endoglucanase, Monochamus saltuarius glycoside hydrolase family 5 (MsGHF5). MsGHF5 was introduced into the genome of Kluyveromyces lactis to maintain expression stability, and mass production of the enzyme was induced using fed-batch fermentation. After 40 h of cultivation, recombinant MsGHF5 was successfully produced in the culture broth, with a yield of 29,000 U/L, upon galactose induction. The optimal conditions for the activity of purified MsGHF5 were determined to be a pH of 5 and a temperature of 35 °C, with the presence of ferrous ions enhancing the enzymatic activity by up to 1.5-fold. Notably, the activity of MsGHF5 produced in K. lactis was significantly higher than that produced in Escherichia coli, suggesting that glycosylation is crucial for the functional performance of the enzyme. This study highlights the potential use of K. lactis as a host for the production of bioactive MsGHF5, thus paving the way for its application in various industrial sectors., Competing Interests: Declaration of competing interest None., (Copyright © 2024 Elsevier Inc. All rights reserved.)

In this study, the effects on silage performance and microbial community of sorghum straw treated with the addition of enzymes (cellulase (CE), xylanase (XE)) and extrusion puffing technology, combined with SEM, XRD, and FTIR techniques, were thoroughly investigated. The results showed that the enzyme preparations, especially xylanase, significantly improved the nutritional value and fermentation efficiency of straw and enhanced the silage effect. Extruding significantly changes the surface structure of the straw, increasing the surface area and porosity, and promoting the attachment of microorganisms. This study not only optimized the sorghum straw silage performance but also provided technical support for the efficient use of straw resources, which is of great significance for the sustainable development of animal husbandry and the resource utilization of agricultural waste., (© 2024. The Author(s).)

Trichoderma reesei, the main filamentous fungus used for industrial cellulase production, was long considered to be asexual. The recent discovery of the mating type locus in the natural isolate QM6a and the possibility to cross this sterile female strain with a fertile natural female strain opened up a new avenue for strain optimization. We crossed the hyperproducer RutC30 with a compatible female ascospore-derived isolate of the wild-type strain CBS999.97 and analyzed about 300 offspring. A continuous distribution of secreted protein levels was observed in the progeny, confirming the involvement of several mutated loci in the hyperproductive phenotype. A bias toward MAT1-2 strains was identified for higher producers, but not directly linked to the Mating-type locus itself. Transgressive phenotypes were observed in terms of both productivity and secretome quality, with offspring that outperform their parents for three enzymatic activities. Genomic sequences of the 10 best producers highlighted the genetic diversity generated and the involvement of parental alleles in hyperproduction and fertility., Importance: The filamentous fungus Trichoderma reesei produces cellulolytic enzymes that are essential for the hydrolysis of lignocellulosic biomass into monomerics sugars. The filamentous fungus T. reesei produces cellulolytic enzymes that are essential for the hydrolysis of lignocellulosic biomass into monomerics sugars, which can in turn be fermented to produce second-generation biofuels and bioproducts. Production performance improvement, which is essential to reduce production cost, relies on classical mutagenesis and genetic engineering techniques. Although sexual reproduction is a powerful tool for improving domesticated species, it is often difficult to apply to industrial fungi since most of them are considered asexual. In this study, we demonstrated that outbreeding is an efficient strategy to optimize T. reesei . Crossing between a natural isolate and a mutagenized strain generated a biodiverse progeny with some offspring displaying transgressive phenotype for cellulase activities., Competing Interests: The authors declare no conflict of interest.

Enzymatic treatment on lignocellulosic biomass has become a trend in preparing nanocellulose (NC), but the process must be optimized to guarantee high production yield and crystallinity. This study offers insights into an innovative protocol using cultivated fungal cellulase and xylanase to improve NC production from raw oil palm leaves (OPL) using five-factor-four-level Taguchi orthogonal design for optimizing parameters, namely substrate and enzyme loading, surfactant concentration, incubation temperature and time. Statistical results revealed the best condition for producing NC (66.06 % crystallinity, 43.59 % yield) required 10 % (w/v) substrate, 1 % (v/v) enzyme, 1.4 % (w/v) Tween-80, with 72-h incubation at 30 °C. Likewise, the highest sugar yield (47.07 %) was obtained using 2.5 % (w/v) substrate, 2.0 % (v/v) enzyme, 2.0 % (w/v) Tween-80, with 72-h incubation at 60 °C. The auxiliary enzymes used in this study, i.e., xylanase, produced higher crystallinity NC, showing widths between 8 and 12 nm and lengths >1 μm and sugars at 47.07 % yield. Thus, our findings proved that optimizing the single-step enzymatic hydrolysis of raw OPL could satisfactorily produce relatively crystalline NC and sugar yield for further transformation into bio-nanocomposites and biofuels. This study presented a simple, innovative protocol for NC synthesis showing characteristics comparable to the traditionally-prepared NC, which is vital for material's commercialization., Competing Interests: Declaration of competing interest The authors declare no known competing interest related to this paper., (Copyright © 2024. Published by Elsevier B.V.)

Rice bran is abundant in dietary fiber and is often referred to as the seventh nutrient, recognized for its numerous health benefits. The objective of the current study is to investigate the extraction of both soluble and insoluble dietary fiber from defatted rice bran (DRB) using an alkali-enzymatic treatment through response surface methodology. The independent variables like substrate percentage (5-30 %), enzyme concentration (1-50 µL/g), and treatment time (2-12 h) and dependent variables were the yield of soluble and insoluble DF. The highest extraction yield was observed with alkali enzyme concentration (50 µL/g) treatment, resulting in 2 % SDF and 59.5 % IDF at 24 h of extraction. The results indicate that cellulase-AC enzyme aids in the hydrolysis of higher polysaccharides, leading to structural alterations in DRB and an increase in DF yield. Furthermore, the disruption of intra-molecular hydrogen bonding between oligosaccharides and the starch matrix helps to increase in DF yield, was also confirmed through FTIR and SEM. The extracted DF soluble and insoluble was then used to develop rice porridge. Sensory evaluation using fuzzy logic analysis reported the highest scores for samples containing 0.5 % insoluble DF and 1.25 % soluble DF., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The influence of light regulation on fungal growth and enzyme production was tested on endophytic isolates of Fusarium proliferatum (CCH), Colletotrichum boninense (PL1, PL9, OL2), Colletotrichum gloeosporiodes (OL3) and Colletotrichum siamense (PL3). The isolates were treated with blue, red, green, and yellow light, while white fluorescent light (12 h light/12 h dark photoperiod) and 24 h dark conditions were applied as control. Results revealed that coloured light treatments induced formation of circadian rings, while exposure to white light and dark conditions showed less pronounced circadian rings. Growth and sporulation of endophytes were not significantly influenced by light. By contrast, enzyme production was affected by coloured light treatments, notably with red (amylase), blue (cellulase) and yellow (cellulase, xylanase, L-asparaginase) light, resulting in lower enzyme levels for certain isolates. Under control conditions, enzyme production was relatively higher for amylase, cellulase, xylanase (for cultures incubated in the dark), and for L-asparaginase (for cultures incubated in white fluorescent light). Among the endophytic isolates, F. proliferatum (CCH) showed better response to coloured light treatment as higher sporulation and enzyme production was detected, although growth was significantly suppressed. On the contrary, C. gloeosporiodes (OL3) showed better growth but significantly lower enzyme production and sporulation when treated with the various coloured light. This study revealed that coloured light may have the potential to manipulate growth, sporulation and enzyme production in certain fungal species as strategies for fungal control or for harnessing of valuable enzymes., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Cellulases have been widely used in many fields such as animal feed, textile, food, lignocellulose bioconversion, etc. Efficient and low-cost production of cellulases is very important for its industrial application, especially in bioconversion of lignocellulosic biomass. Filamentous fungi are currently widely used in industrial cellulase production due to their ability to secrete large amounts of active free cellulases extracellularly. This review comprehensively summarized the research progress on cellulases from filamentous fungi in recent years, including filamentous fungi used for cellulase production and its modification strategies, enzyme compositions, characterization methods and application of fungal cellulase systems, and the production of fungal cellulase includes production processes, factors affecting cellulase production such as inducers, fermentation medium, process parameters and their control strategies. Also, the future perspectives and research topics in fungal cellulase production are presented in the end of the review. The review helps to deepen the understanding of the current status of fungal cellulases, thereby promoting the production technology progress and industrial application of filamentous fungal cellulase., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, a cellulase-responsive controlled-release formulation (FPR-HMS-HPC) was developed by grafting hydroxypropyl cellulose (HPC) onto fipronil (FPR) loaded hollow mesoporous silica (HMS) nanoparticles via ester linkage. The FPR-HMS-HPC formulation was characterized using scanning and transmission electron microscopies, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The results indicated that FPR-HMS-HPC exhibited a high loading capacity of 10.0 % (w/w) and demonstrated favorable responsiveness to cellulase enzyme. Moreover, its insecticidal efficacy against Reticulitermes flaviceps surpassed that of an equivalent dose of FPR. Toxicology studies showed that the mortality and hatching rates of zebrafish exposed to FPR-HMS-HPC nanoparticles were reduced by >6.5 and 8.0 times, respectively. Thus, HPC-anchored HMS nanoparticles as insecticide delivery systems present a sustainable method for pest control significantly reducing harm to non-target organisms and the environment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study evaluates the feasibility of using enzymatic technology to produce novel nanostructures of cellulose nanomaterials, specifically cellulose nanospheres (CNS), through enzymatic hydrolysis with endoglucanase and xylanase of pre-treated cellulose fibers. A statistical experimental design facilitated a comprehensive understanding of the process parameters, which enabled high yields of up to 82.7 %, while maintaining a uniform diameter of 54 nm and slightly improved crystallinity and thermal stability. Atomic force microscopy analyses revealed a distinct CNS formation mechanism, where initial fragmentation of rod-like nanoparticles and subsequent self-assembly of shorter rod-shaped nanoparticles led to CNS formation. Additionally, adjustments in process parameters allowed precise control over the CNS diameter, ranging from 20 to 100 nm, highlighting the potential for customization in high-performance applications. Furthermore, this study demonstrates how the process framework, originally developed for cellulose nanocrystals (CNC) production, was successfully adapted and optimized for CNS production, ensuring scalability and efficiency. In conclusion, this study emphasizes the versatility and efficiency of the enzyme-based platform for producing high-quality CNS, providing valuable insights into energy consumption for large-scale economic and environmental assessments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, pectin extracted from pomelo peel was investigated using three different combination methods of pulsed electric field (PEF) and cellulase. Three action sequences were performed, including PEF treatment followed by enzymatic hydrolysis, enzymatic hydrolysis followed by PEF treatment, and enzymatic hydrolysis simultaneously treated by PEF. The three corresponding pectins were namely PEP, EPP and SP. The physiochemical, molecular structural and functional properties of the three pectins were determined. The results showed that PEP had excellent physiochemical properties, with the highest yield (12.08 %), total sugar (80.17 %) and total phenol content (38.20 %). The monosaccharide composition and FT-IR analysis indicated that the three pectins were similar. The molecular weights of PEP, EPP and SP were 51.13, 88.51 and 40.00 kDa, respectively. PEP showed the best gel properties, emulsification stability and antioxidant capacity among the three products, due to its high galacturonic acid and total phenol content, appropriate protein and low molecular weight. The mechanism of PEF-assisted cellulase hydrolysis of pomelo peel was also revealed by SEM analysis. These results suggested that PEF pretreatment was the best method, which not only improved the efficiency of enzymatic extraction, but also reduced resource waste and increased financial benefits., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The dual-frequency ultrasound-assisted enzymatic digestion (DUED) technique was developed for synchronous green extraction of five heavy metal ions in root vegetables. The combination of α-amylase, cellulase, and papain showed significant advantageous in extracting heavy metal ions. Under optimized dual-frequency ultrasonic conditions, the extraction rates of Cr, As, Cd, Pb, and Hg in carrots reached 99.04%, 105.88%, 104.65%, 104.10%, and 103.13% respectively. And the extraction process is highly efficient, completing in just 15 min. Compared to conventional microwave-assisted acid hydrolysis method, this technique eliminates the need for high-temperature concentrated acid, enhancing its environmental sustainability while maintaining mild reaction conditions, making it ideal for biosensors application. Additionally, simultaneous extraction and detection of four heavy metals in lotus roots were successfully achieved by using DUED and a fluorescent paper-based microfluidic chip. The obtained results are consistent with those obtained using conventional methods., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Nature has developed extremozymes that catalyze complex reaction processes in extreme environmental conditions. Accordingly, a combined approach consisting of extremozyme screening, ancestral sequence resurrection (ASR), and molecular dynamic simulation was utilized to construct a developed endoglucanase. The primary experimental and in-silico data led to the prediction of a hypothetical sequence of endoglucanase (EG5-G131) using Bacillus sp. G131 confirmed by amplification and sequencing. EG5-G131 exhibited noticeable stability in a broad-pH range, several detergents, organic solvents, and temperatures up to 80 °C. The molecular weight, V max , and K m of the purified endoglucanase were estimated to be 36 kDa, 4.32 μmol/min, and 23.62 mg/ml, respectively. The calculated thermodynamic parameters for EG5-G131 confirmed its intrinsic thermostability. Computational analysis revealed Glu142 and Glu230 as active-site residues of the enzyme. Furthermore, the enzyme remained bound to cellotetraose at 298 K, 333 K, 343 K, and 353 K for 300 ns, consistent with our experimental data. ASR of EG5-G131 led to the introduction of ancestral ANC204 and ANC205, which show similar thermodynamic characteristics with the last Firmicute common ancestor. Finally, truncating loops from the N-terminal of two sequences created two variants with desirable thermal stability, suggesting the evolutionary deciphering of the functional domain of the GH5 family in Bacillus sp. G131., Competing Interests: Declaration of competing interest The authors declare that they have no competing interests in this communication., (Copyright © 2024. Published by Elsevier B.V.)

This study aims to explore the feasibility of introducing, during the manufacture of bakery bread, an enzymatic cocktail coproduced by the fungus Stachybotrys microspora: α-amylases, xylanases and cellulases, using wheat bran as a nutrient source. Among the characteristics of the alveograph (dough tenacity "P" and dough extensibility "L"), the addition of a cocktail of enzymes at a concentration of 2 %, to weak wheat flour, has made it possible to significantly reduce its P/L ratio from 2.45 to 1.41. Furthermore, the use of enzyme cocktails at 2 %, 4 %, and 6 % concentrations increases the brown color of the bread crust. The great reduction in the rate of bread firmness, during storage over 5 days, was obtained in the presence of an enzyme cocktail in comparison with bread control (65.13 N for the control and 22.99 N, 23.24 N, and 18.24 N for bread enriched with enzyme cocktail at 2 %, 4 % and 6 % concentrations, respectively). In conclusion, the enzyme cocktail added can synergistically improve bread dough rheology and bread properties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The important role of Carbohydrate-binding module (CBM) in the cellulases catalytic activity has been widely studied. CBM3 showed highest affinity for cellulose substrate with 84.69 % adsorption rate among CBM1, CBM2, CBM3, and CBM4 in this study. How CBM affect the catalytic properties of GH5 endoglucanase III from Trichoderma viride (TvEG3) was systematically explored from two perspectives: the deletion of its own CBM(TvEG3dc) and the replacement of high substrate affinity CBM3 (TvEG3dcCBM3). Compared with TvEG3, TvEG3dc lost its binding ability on Avicel and filter paper, but its catalytic activity did not change significantly. The binding ability and catalytic activity of TvEG3dcCBM3 to Avicel increased 348.3 % and 372.51 % than that of TvEG3, respectively. The binding ability and catalytic activity of TvEG3dcCBM3 to filter paper decreased 51.7 % and 33.33 % than that of TvEG3, respectively. Further structural analysis of TvEG3, TvEG3dc, and TvEG3dcCBM3 revealed no changes in the positions and secondary structures of the key amino acids. These results demonstrated that its own CBM1 of TvEG3 did not affect its catalytic activity center, so it had no effect on its catalytic activity. But CBM3 changed the adsorption affinity for different substrates, which resulted in a change in the catalytic activity of the substrate., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Pine wilt disease, which is caused by the nematode Bursaphelenchus xylophilus, is one of the most destructive forest diseases worldwide. Esteya vermicola, a nematophagous fungus, has emerged as a promising biological control agent. However, the limited availability of gene function analysis techniques hinders further genetic modification of this fungus. In this study, we employed a combination of enzymes (driselase, snailase, and cellulase) to enzymatically degrade the cell wall of the fungus, resulting in a high yield of protoplasts. Furthermore, by utilizing 0.6 M sucrose as an osmotic pressure stabilizer, we achieved a significant protoplast regeneration rate of approximately 31%. Subsequently, we employed the polyethylene glycol-mediated protoplast transformation method to successfully establish a genetic transformation technique for E. vermicola CBS115803. Additionally, through our investigation, we identified the Olic promoter from Aspergillus nidulans, which effectively enhanced the expression of the DsRed gene encoding a red fluorescent protein in E. vermicola CBS115803. Moreover, we successfully implemented a split-marker strategy to delete the EvIPMD gene in E. vermicola CBS115803. In summary, our findings present valuable experimental methodologies for gene function analysis in E. vermicola CBS115803., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

The escalating prevalence of drug-resistant pathogens not only jeopardizes the effectiveness of existing treatments but also increases the complexity and severity of infectious diseases. Escherichia coli is one the most common pathogens across all healthcare-associated infections. Enzymatic treatment of bacterial biofilms, targeting extracellular polymeric substances (EPS), can be used for EPS degradation and consequent increase in susceptibility of pathogenic bacteria to antibiotics. Here, we characterized three recombinant cellulases from Thermothelomyces thermophilus: a cellobiohydrolase I (TthCel7A), an endoglucanase (TthCel7B), and a cellobiohydrolase II (TthCel6A) as tools for hydrolysis of E. coli and Gluconacetobacter hansenii biofilms. Using a design mixture approach, we optimized the composition of cellulases, enhancing their synergistic activity to degrade the biofilms and significantly reducing the enzymatic dosage. In line with the crystalline and ordered structure of bacterial cellulose, the mixture of exo-glucanases (0.5 TthCel7A:0.5 TthCel6A) is effective in the hydrolysis of G. hansenii biofilm. Meanwhile, a mixture of exo- and endo-glucanases is required for the eradication of E. coli 042 and clinical E. coli biofilms with significantly different proportions of the enzymes (0.56 TthCel7B:0.44 TthCel6A and 0.6 TthCel7A:0.4 TthCel7B, respectively). X-ray diffraction pattern and crystallinity index of E. coli cellulose are comparable to those of carboxymethyl cellulose (CMC) substrate. Our results illustrate the complexity of E. coli biofilms and show that successful hydrolysis is achieved by a specific combination of cellulases, with consistent recurrence of TthCel7B endoglucanase., (© 2024. The Author(s).)

Cellulase selectively recognizes cellulose surfaces and cleaves their β-1,4-glycosidic bonds. Combining hydrolysis using cellulase and fermentation can produce alternative fuels and chemical products. However, anaerobic bacteria produce only low levels of highly active cellulase complexes so-called cellulosomes. Therefore, we designed hybrid cellulase complexes from 49 biotinylated catalytic domain (CD) and 30 biotinylated cellulose-binding domain (CBD) libraries on streptavidin-conjugated nanoparticles to enhance cellulose hydrolysis by mimicking the cellulosome structure. The hybrid cellulase complex, incorporating both native CD and CBD, significantly improved reducing sugar production from cellulose compared to free native modular enzymes. The optimal CBD for each hybrid cellulase complex differed from that of the native enzyme. The most effective hybrid cellulase complex was observed with the combination of CD 6-4 from Thermobifida fusca YX and CBD 46 from the Bacillus halodurans C-125. The hybrid cellulase complex/CD 6-4 -CBD 46 and -CD 6-4 -CBD 2-5 combinations showed increased reducing sugar production. Similar results were also observed in microcrystalline cellulose degradation. Furthermore, clustering on nanoparticles enhanced enzyme thermostability. Our results demonstrate that hybrid cellulase complex structures improve enzyme function through synergistic effects and extend the lifespan of the enzyme., (© 2024. The Author(s).)

Cotton is the most common natural fibre used in textile manufacture, used alone or with other fibres to create a wide range of fashion clothing and household textiles. Most of these textiles are cleaned using detergents and domestic or commercial washing machines using processes that require many chemicals and large quantities of water and energy. Enzymes can reduce this environmental footprint by enabling effective detergency at reduced temperatures, mostly by directly attacking substrates present in the soils. In the present study, we report the contribution of a cleaning cellulase enzyme based on the family 44 glycoside hydrolase (GH) endo-beta-1,4-glucanase from Paenibacillus polymyxa. The action of this enzyme on textile fibres improves laundry detergent performance in several vectors including soil anti-redeposition, dye transfer inhibition and stain removal. Molecular probes are used to study how this enzyme is targeting both amorphous cellulose and xyloglucan on textile fibres and the relationship between textile surface effects and observed performance benefits., (© 2024. The Author(s).)

Cordyceps militaris solid medium polysaccharides (CMMPs) were extracted using an ultrasound-assisted enzyme method, and the process conditions were optimized via response surface methodology (RSM). The CMMPs were separated into four components named CMMP-1, CMMP-2, CMMP-3 and CMMP-4 using ethanol fractional precipitation, and their monosaccharide composition and structural properties were analyzed by molecular weight analysis, Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), Congo red test, ultraviolet-visible spectroscopy (UV-vis), atomic force microscopy (AFM), and thermogravimetric analysis (TGA). RSM could predict the yield of the CMMP (R 2 = 0.9928), and the polysaccharide yield was 15.43% under the selected conditions of 3.1% cellulase enzyme addition, a liquid-solid ratio of 42:1, an extraction temperature of 61 °C, and an extraction time of 60 min. Glucose and galactose were the main constituents of the four fractional precipitated polysaccharides. Furthermore, four components exhibited antioxidant activity, and CMMP-1 demonstrated stronger antioxidant activity in vitro. This study demonstrates the possibility of developing a natural antioxidant food from Cordyceps militaris solid medium.

Enzymatic hydrolysis contributes to obtaining fermentable sugars using pretreated lignocellulose materials for bioethanol generation. Unfortunately, the pretreatment of lignocellulose causes low substrate enzymatic hydrolysis, which is due to the structure changes of lignin to produce main phenolic by-products and non-productive cellulase adsorption. It is reported that modified lignin enhances the speed of enzymatic hydrolysis through single means to decrease the negative effects of fermentation inhibitors or non-productive cellulase adsorption. However, a suitable modified lignin should be selected to simultaneously reduce the fermentation inhibitors concentration and non-productive cellulase adsorption for saving resources and maximizing the enzymatic hydrolysis productivity. Meanwhile, the adsorption micro-mechanisms of modified lignin with fermentation inhibitors and cellulase remain elusive. In this review, different pretreatment effects toward lignin structure, and their impacts on subsequent enzymatic hydrolysis are analyzed. The main modification methods for lignin are presented. Density functional theory is used to screen suitable modification methods for the simultaneous reduction of fermentation inhibitors and non-productive cellulase adsorption. Lignin-fermentation inhibitors and lignin-cellulase interaction mechanisms are discussed using different advanced analysis techniques. This article addresses the gap in previous reviews concerning the application of modified lignin in the enhancement of bioethanol production. For the first time, based on existing studies, this work posits the hypothesis of applying theoretical simulations to screen efficient modified lignin-based adsorbents, in order to achieve a dual optimization of the detoxification and saccharification processes. We aim to improve the integrated lignocellulose transformation procedure for the effective generation of cleaner bioethanol., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The mussel Mytilus californianus is an ecosystem engineer forming beds along the coastlines of Northeastern Pacific shores. As sessile organisms, they modulate their energy balance through valve movements, feeding, and digestive functionality. A recent study observed that activity of the digestive enzyme cellulase was higher than predicted in mussels high on the shore, where temperatures are characteristically high and food availability is limited compared to low-shore habitats. In the current study, we predicted that this scavenging behavior is induced to mitigate energy losses related to heat-shock responses-that cellulase and amylase will display hyperactivity for limited recourses in the face of aerial heating. In the laboratory, we acclimated mussels to three complex diets that differed in starch and cellulose composition, followed by two acute heat shocks (+8°C) in the laboratory. Results showed no hyperactivity of amylase and cellulase in heated mussels. These results differ from previous studies that showed lowered amylase activity following heat acclimation. This difference in amylase activity across heat-stress exposure time is important when analyzing mussel bed disturbances following heat waves that compromise energy balance or cause death within adult populations., (© The Author(s) 2024. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology.)

The pretreatment and saccharification of dewaxed bagasse (DWB) has been investigated under various reaction conditions ranging 2000 to 3200 psi, at 70 ± 1 °C in supercritical carbon dioxide (SCC). This has been in attempt to transform the DWB into fermentable sugar and bioethanol in high yields. The effect of SCC mediated pretreatment and enzymatic hydrolysis on structural and morphological alterations in DWB has been ascertained through diverse analytical methods. The sugar has been released through cellulase (40 FPU/mL) mediated enzymatic hydrolysis of pretreated DWB in sodium acetate buffer (pH 4.7) within 1 h at SCC 2800 psi, 70 ± 1 °C. The released sugar was subsequently fermented in the presence of yeast (Saccharomyces crevices, 135 CFU) at 28 ± 1 °C over 72 h to afford the bioethanol. The SCC mediated process conducted in acetic acid:water media (1:1) at 2800 psi, 70 ± 1 °C over 6 h has afforded the pretreated DWB with maximum yield towards the production of fermentable sugar and bioethanol. The production of fermentable sugar and bioethanol has been electrochemically estimated through cyclic voltammetry (CV) and square wave voltammetry (SWV) over glassy carbon electrode in KOH (0.1 M). The electrochemical methods were found selective and in close agreement for estimation of the yields (%) of fermentable sugars and bioethanol. The yield (%) of fermentable sugar estimated from CV and SWV were 80.10 ± 5.34 and 79.00 ± 5.09 respectively. Whereas the yield (%) of bioethanol estimated from CV and SWV were 81.30 ± 2.78% and 78.6 ± 1.25% respectively. Present investigation delivers a SCC mediated green and sustainable method of pretreatment of DWB to afford the enhanced saccharification, to produce bioethanol in high yields., (© 2024. The Author(s).)

Two multimodular endoglucanases in glycoside hydrolase family 5, Re Cel5 and El Cel5, share 73% identity and exhibit similar modular structures: family 1 carbohydrate-binding module (CBM1); catalytic domain; CBMX2; module of unknown function. However, they differed in their biochemical properties and catalytic performance. Re Cel5 showed optimal activity at pH 4.0 and 70 °C, maintaining stability at 70 °C (>80% activity). Conversely, El Cel5 is optimal at pH 3.0 and 50 °C (>50% activity at 50 °C). El Cel5 excels in degrading CMC-Na (256 U/mg vs 53 U/mg of Re Cel5). Five domain-truncated (TM1-TM5) and four domain-replaced (RM1-RM4) mutants of Re Cel5 with the counterparts of El Cel5 were constructed, and their enzymatic properties were compared with those of the wild type. Only RM1, with El Cel5-CBM1, displayed enhanced thermostability and activity. The hydrolysis of pretreated corn stover was reduced in most TM and RM mutants. Molecular dynamics simulations revealed interdomain interactions within the multimodular endoglucanase, potentially affecting its structural stability and complex biological catalytic processes.

Phosphoethanolamine (pEtN) cellulose is a naturally occurring modified cellulose produced by several Enterobacteriaceae. The minimal components of the E. coli cellulose synthase complex include the catalytically active BcsA enzyme, a hexameric semicircle of the periplasmic BcsB protein, and the outer membrane (OM)-integrated BcsC subunit containing periplasmic tetratricopeptide repeats (TPR). Additional subunits include BcsG, a membrane-anchored periplasmic pEtN transferase associated with BcsA, and BcsZ, a periplasmic cellulase of unknown biological function. While cellulose synthesis and translocation by BcsA are well described, little is known about its pEtN modification and translocation across the cell envelope. We show that the N-terminal cytosolic domain of BcsA positions three BcsG copies near the nascent cellulose polymer. Further, the semicircle's terminal BcsB subunit tethers the N-terminus of a single BcsC protein in a trans-envelope secretion system. BcsC's TPR motifs bind a putative cello-oligosaccharide near the entrance to its OM pore. Additionally, we show that only the hydrolytic activity of BcsZ but not the subunit itself is necessary for cellulose secretion, suggesting a secretion mechanism based on enzymatic removal of translocation incompetent cellulose. Lastly, protein engineering introduces cellulose pEtN modification in orthogonal cellulose biosynthetic systems. These findings advance our understanding of pEtN cellulose modification and secretion., (© 2024. The Author(s).)

Cellulose is an abundant biomass on the planet. Various cellulases from environmental microbes have been explored for industrial use of cellulose. Marine fish intestine is of interest as one source of new enzymes. Here, we report the discovery of genes encoding two β-glucosidases (Bgl3A and Bgl3B) and four endo-1,4-β-glucanases (Cel5A, Cel8, Cel5B, and Cel9) as part of the genome sequence of a cellulolytic marine bacterium, Microbulbifer sp. Strain GL-2. Five of these six enzymes (excepting Cel5B) are presumed to localize to the periplasm or outer membrane. Transcriptional analysis demonstrated that all six genes were highly expressed in stationary phase. The transcription was induced by cello-oligosaccharides rather than by glucose, suggesting that the cellulases are produced primarily for nutrient acquisition following initial growth, facilitating the secondary growth phase. We cloned the genes encoding two of the endo-1,4-β-glucanases, Cel5A and Cel8, and purified the corresponding recombinant enzymes following expression in Escherichia coli. The activity of Cel5A was observed across a wide range of temperatures (10-40 ˚C) and pHs (6-8). This pattern differed from those of Cel8 and the commercial cellulase Enthiron, both of which exhibit decreased activities below 30 ˚C and at alkaline pHs. These characteristics suggest that Cel5A might find use in industrial applications. Overall, our results reinforce the hypothesis that marine bacteria remain a possible source of novel cellulolytic activities.

Pretreatment is crucial for effective enzymatic saccharification of lignocellulose such as sugarcane bagasse (SCB). In the present study, SCB was pretreated with five kinds of heterogeneous Fenton-like systems (HFSs), respectively, in which α-FeOOH, α-Fe 2 O 3 , Fe 3 O 4 , and FeS 2 worked as four traditional heterogeneous Fenton-like catalysts (HFCs), while FeVO 4 worked as a novel HFC. The enzymatic reducing sugar conversion rate was then compared among SCB after different heterogeneous Fenton-like pretreatments (HFPs), and the optimal HFS and pretreatment conditions were determined. The mechanism underlying the difference in saccharification efficiency was elucidated by analyzing the composition and morphology of SCB. Moreover, the ion dissolution characteristics, variation of pH and Eh values, H 2 O 2 and hydroxyl radical (·OH) concentration of FeVO 4 and α-Fe 2 O 3 HFSs were compared. The results revealed that the sugar conversion rate of SCB pretreated with FeVO 4 HFS reached up to 58.25%, which was obviously higher than that under other HFPs. In addition, the surface morphology and composition of the pretreated SCB with FeVO 4 HFS were more conducive to enzymatic saccharification. Compared with α-Fe 2 O 3 , FeVO 4 could utilize H 2 O 2 more efficiently, since the dissolved Fe 3+ and V 5+ can both react with H 2 O 2 to produce more ·OH, resulting in a higher hemicellulose and lignin removal rate and a higher enzymatic sugar conversion rate. It can be concluded that FeVO 4 HFP is a promising approach for lignocellulose pretreatment., (© 2024 Wiley Periodicals LLC.)

This work aimed to isolate and characterize a novel chitin-degrading bacterium from Yok Don National Park, Vietnam, for crop production studies. Among the chitinolytic isolates, strain YSY-4.3 was selected, which grew rapidly and produced a large halo around the colony. 16S rDNA analysis indicated that the strain is a novel species in the genus Paenibacillus, and an in vitro evaluation showed that the strain produced phytohormones (IAA, GA3, and zeatin), biofilms, and siderophores; possessed cellulase; and exerted antifungal activity. The whole genome of the strain was 5,628,400 bp with 49.3% GC content, 5056 coding sequences, 48 tRNA, and 1 rRNA. It shared the highest values of digital DNA-DNA hybridization (67.4%) and average nucleotide identity (89.54%) with those of Paenibacillus woosongensis B2_4 (CP126084.1), suggesting a novel species. Of the coding sequences, 4287 proteins were identified by COG, and 2561 were assigned by KEGG. The genome contained at least 51 genes involved in plant growth and resistance to heavy-metal toxicity and 359 carbohydrate-active enzymes. The chitinolytic system of the strain was composed of 15 enzymes, among them, PsChiC, which contained a GH18 catalytic domain and a GH5 catalytic domain, had not been previously reported. In addition, the genome possessed 15 gene clusters encoding antimicrobial metabolites, 10 of which are possible novel clusters. This study expands knowledge regarding novel chitinolytic bacteria from Yok Don National Park and provides a valuable gene resource for future studies., (© 2024 Wiley‐VCH GmbH.)

Cellulose reducing ends are believed to play a vital role in the cellulose recalcitrance to enzymatic conversion. However, their role in insoluble cellulose accessibility and hydrolysis is not clear. Thus, in this study, reducing ends of insoluble cellulose derived from various sources were modified by applying reducing and/or oxidizing agents. The effects of cellulose reducing ends modification on cellulose reducing ends, cellulose structure, and cellulose accessibility to cellulase were evaluated along with the impact on cellulose hydrolysis with complete as well purified cellulase components. Sodium borohydride (NaBH 4 ) reduction and sodium chlorite-acetic acid (SC/AA) oxidation were able to modify more than 90% and 60% of the reducing ends, respectively, while the bicinchoninic acid (BCA) reagent applied for various cycles oxidized cellulose reducing ends to various extents. X-ray diffractograms of the treated solids showed that these treatments did not change the cellulose crystalline structure and the change in crystallinity index was insignificant. Surprisingly, it was found that the cellulose reducing ends modification, either through selective NaBH 4 reduction or BCA oxidation, had a negligible impact on cellulose accessibility as well on cellulose hydrolysis rates or final conversions with complete cellulase at loadings as low as 0.5 mg protein/g cellulose. In fact, in contrast to what is traditionally believed, modifications of cellulose reducing ends by these two methods had no apparent impact on cellulose conversion with purified cellulase components and their synergy. However, SC/AA oxidation resulted in significant drop in cellulose conversion (10%-50%) with complete as well purified cellulase components. Nonetheless, further research revealed that the cause for drop in cellulose conversion for the SC/AA oxidation case was due to primary hydroxyl groups (PHGs) oxidation and not the oxidation of reducing ends. Furthermore, it was found that the PHGs modification affects cellulose accessibility and slows the cellulase uptake as well resulting in significant drop in cellulose conversions., (© 2024 Wiley Periodicals LLC.)

This study investigates the synthesis of (hemi)cellulolytic enzymes, including endoglucanase (CMCase), xylanase, and β-glucosidase, employing Trichoderma reesei RUT-C30 and deoiled oil palm mesocarp fiber (OPMF) through solid-state fermentation (SSF). The objective was to determine the optimal process conditions for achieving high enzyme activities through a one-factor-at-a-time approach. The study primarily focused on the impact of the solid-to-liquid ratio, incubation period, initial pH, and temperature on enzyme activity. The effects of OPMF pretreatment, particularly deoiling and fortification, were explored. This approach significantly improved enzyme activity levels compared to the initial conditions, with CMCase increasing by 111.6 %, xylanase by 665.2 %, and β-Glucosidase by 1678.1 %. Xylanase and β-glucosidase activities, peaking at 1346.75 and 9.89 IU per gram dry substrate (GDS), respectively, under optimized conditions (1:4 ratio, pH 7.5, 20 °C, 9-day incubation). With lower moisture levels, CMCase reached its maximum activity of 227.84 IU/GDS. The study highlights how important it is for agro-industrial byproducts to support environmentally sustainable practices in the palm oil industry. It also emphasizes how differently each enzyme reacts to changes in process parameters., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In the context of biorefinery, researchers have been looking for lignocellulosic biomasses and ideal treatments to produce economically viable biofuels. In this scenario, the bamboo culm appears as a plant matrix of great potential, given the high cellulose content of low crystallinity. Thus, the objective and differential of this work was to determine the best conditions for enzymatic hydrolysis of cellulose extracted from bamboo culm and to evaluate its potential application in the production of bioethanol through Separate Hydrolysis and Fermentation (SHF) and Saccharification and Simultaneous Fermentation (SSF) by Saccharomyces cerevisiae modified via CRISPR/Cas9. The average cellulose extraction yield was 41.87 % with an extraction efficiency of 86.76 %. In general, as the hydrolysis time increased, an increase in glucose production was observed in almost all assays, with higher hydrolysis efficiency values at 72 h. The results ranged from 2.09 to 19.8 g/L of glucose obtained with efficiency values of 10.47 to 99 %. The best conditions were found in test 5 (temperature of 36 °C and pH 5.0, with only 10 FPU/g of substrate Cellic Ctec2 Novozymes ® cocktail). It is observed that for all hydrolysis times the independent variables pH and temperature were significant under the hydrolysis efficiency, showing a negative effect, indicating that higher values of the same promote lower values of the response variable. For bioethanol production, a maximum concentration of 7.84 g/L was observed for the SSH process after 4 h of fermentation, while for the SSF process it was 12.6 g/L after 24 h of fermentation, indicating the large potential of the simultaneous process together with the application of bamboo culm biomass for high production of biofuel., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Stropharia rugosoannulata has been used in environmental engineering to degrade straw in China. The nitrogen and carbon metabolisms are the most important factors affecting mushroom growth, and the aim of this study was to understand the effects of different nitrogen levels on carbon metabolism in S. rugosoannulata using transcriptome analysis. The mycelia were highly branched and elongated rapidly in A3 (1.37% nitrogen). GO and KEGG enrichment analyses revealed that the differentially expressed genes (DEGs) were mainly involved in starch and sucrose metabolism; nitrogen metabolism; glycine, serine and threonine metabolism; the MAPK signaling pathway; hydrolase activity on glycosyl bonds; and hemicellulose metabolic processes. The activities of nitrogen metabolic enzymes were highest in A1 (0.39% nitrogen) during the three nitrogen levels (A1, A2 and A3). However, the activities of cellulose enzymes were highest in A3, while the hemicellulase xylanase activity was highest in A1. The DEGs associated with CAZymes, starch and sucrose metabolism and the MAPK signaling pathway were also most highly expressed in A3. These results suggested that increased nitrogen levels can upregulate carbon metabolism in S. rugosoannulata. This study could increase knowledge of the lignocellulose bioconversion pathways and improve biodegradation efficiency in Basidiomycetes.

Mixed-linkage glucans are major components of grassy cell-walls and cereal endosperm. Recently identified plant endo-β-glucanase from the EG16 family cleaves MLGs with strong specificity towards regions with at least four sequential β(1,4)-linked glucose residues. This activity yields a low molecular-weight MLG with a repeating structure of β(1,3)-linked cellotriose that gels rapidly at concentrations as low as 1.0 % w/v. To understand the gelation mechanism, we investigated the structure and behavior using rheology, microscopy, X-ray scattering, and molecular dynamics simulations. Upon digestion, the material's rheological behavior changes from typical polymeric material to a fibrillar network behavior seen for e.g. cellulose nanofibrils. Scanning electron microscopy and confocal microscopy verifies these changes in micro- and nanostructure. Small-angle X-ray scattering shows in-solution self-assembly of MLG through ~10 nm elemental structures. Wide-angle X-ray scattering data indicate that the polymer association is similar to cellulose II, with dominant scattering at d-spacing of 0.43 nm. Simulations of two interacting glucan chains show that β(1,3)-linkages prevent the formation of tight helices that form between β(1,4)-linked d-glucan chains, leading to weaker interactions and less ordered inter-chain assembly. Overall, these data indicate that digestion drives gelation not by enhancement of interactions driving self-assembly, but by elimination of unproductive interactions hindering self-assembly., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Cryptococcus gattii and its medical implications have been extensively studied. There is, however, a significant knowledge gap regarding cryptococcal survival in its environmental niche, namely woody material, which is glaring given that infection is linked to environmental populations. A gene from C. gattii (WM276), the predominant global molecular type (VGI), has been sequenced and annotated as a putative cellulase. It is therefore, of both medical and industrial intertest to delineate the structure and function of this enzyme. A homology model of the enzyme was constructed as a fusion protein to a maltose binding protein (MBP). The CGB_E4160W gene was overexpressed as an MBP fusion enzyme in Escherichia coli T7 cells and purified to homogeneity using amylose affinity chromatography. The structural and functional character of the enzyme was investigated using fluorescence spectroscopy and enzyme activity assays, respectively. The optimal enzyme pH and temperature were found to be 6.0 and 50 °C, respectively, with an optimal salt concentration of 500 mM. Secondary structure analysis using Far-UV CD reveals that the MBP fusion protein is primarily α-helical with some β-sheets. Intrinsic tryptophan fluorescence illustrates that the MBP-cellulase undergoes a conformational change in the presence of its substrate, CMC-Na + . The thermotolerant and halotolerant nature of this particular cellulase, makes it useful for industrial applications, and adds to our understanding of the pathogen's environmental physiology., Competing Interests: Declaration of competing interest The authors have no competing interests to declare that are relevant to the content of this article., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Apple pomace, an abundant agricultural by-product with low utilization rates, often leads to environmental pollution if not properly managed. This study aimed to enhance the nutritional value of apple pomace by comparing the effects of solid-state fermentation using complex probiotics and cellulase preparation. Additionally, the study investigated the dynamic changes in various components throughout the fermentation process with complex probiotics. The results of single-strain solid-state fermentation tests indicated that Lactiplantibacillus plantarum DPH, Saccharomyces cerevisiae SC9, and Bacillus subtilis C9 were the optimal strains for fermenting the most effective substrate combination, comprising 73 % apple pomace and 20 % millet bran. The strains (complex probiotics) and a cellulase preparation were used for the solid-state fermentation of the apple pomace mixture for nine days, respectively. The contents of acid detergent fiber, neutral detergent fiber, hemicellulose, and insoluble dietary fiber decreased by up to 9.99 %, 9.59 %, 23.21 %, and 14.34 %, respectively. In contrast, the content of soluble dietary fiber significantly increased by up to 29.74 %. Both methods reduced cellulose crystallinity and modified the substrate's surface structure, resulting in a looser arrangement. Fermentation with complex probiotics for three or six days increased the abundance of lactic acid bacteria, which comprised >87 % of the total microbial population. Concurrently, the abundance of detrimental bacteria, such as Salmonella, Acetobacter, Escherichia, and Pantoea, significantly decreased. Furthermore, fermentation with complex probiotics for six or nine days enhanced antioxidant properties, leading to a significant increase in beneficial metabolites, including amino acids, organic acids, gamma-aminobutyric acid, serotonin. In conclusion, complex probiotics can effectively substitute for cellulase preparation in the solid-state fermentation of apple pomace, with a six-day fermentation period yielding optimal results. This study provides valuable insights into enhancing the value of apple pomace in the feed industry and the effective application of agro-industrial by-products., Competing Interests: Declaration of competing interest The authors declare to have no competing financial interests or personal relationships that could appear to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

As the most abundant renewable carbon source, lignocellulose holds potential as a raw material for biofuels and biochar. The components required for biofuel production differ from those for biochar, so combining processes can reduce costs. Biofuel preparation necessitates cellulase treatment of lignocellulose. This study examines the effects of various enzyme treatment conditions (dosage, time, temperature) on lignocellulose, focusing on the properties of biochar derived from it (BC-SR). A mathematical model was constructed to study the relationship between enzyme treatment conditions and BC-SR properties. BC-SR exhibited high adsorption selectivity for bisphenol A and outperformed untreated biochar in fixed-bed column experiments, demonstrating greater removal efficiency and structural integrity. This study provides insights into the impact of enzymatic treatment on biochar and offers a cost-effective method for producing stable, efficient biochar. Additionally, a highly persistent biochar can enter the carbon trading market as a carbon-neutral technology, further realizing economic and environmental benefits., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Fungi play a crucial role in straw composting due to the synergistic degradation effects of their secreted lignocellulose hydrolases. An efficient straw-composting system relies on thermophilic fungi and their lignocellulose hydrolases. Thermomyces lanuginosus, a typical thermophilic fungus in compost, lacks cellulase genes. A versatile Thermomyces strain capable of degrading cellulose, T. lanuginosus M85, which grows at 67 °C, was developed and transformed using the AgCMCase of Aspergillus glaucus. The R6 transformant exhibited high-level expression of the AgCMCase. Significant quantities of active cellulase produced by R6 were detected in the cellulose fermentation broth, peaking within 6-8 days. Compost analysis indicated that R6 increased the internal compost temperatures and prolonged high-temperature durations. Correspondingly, more reducing sugars and humus were released, which could promote plants growth. In summary, a cellulase-producing strain of T. lanuginosus capable of efficiently converting straws into organic fertilizers was engineered. This innovation holds considerable promise for sustainable and circular agricultural practices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Dried shiitake mushrooms offer rich nutritional value and unique sensory properties, prompting further investigation. The effects of different drying techniques (hot air drying (HAD), infrared hot air drying (IRHAD), pulsed vacuum drying (PVD), vacuum freeze drying (VFD), and natural drying (ND)) combined with enzymatic hydrolysis on the release of flavor compounds and nutrients from shiitake mushrooms were explored. The combination of HAD with cellulase hydrolysis yielded notably high levels of umami amino acids (5.4723 ± 0.1501 mg/g) and 5'-nucleotides (4.0536 ± 0.0062 mg/g), and superior volatile flavors. Combined with cellulase hydrolysis, IRHAD achieved the highest level of total sugars (6.57 ± 0.34 mg/mL), VFD resulted in the greatest soluble protein content (153.21 ± 0.23 μg/mL), PVD yielded the highest total phenolics content (93.20 ± 0.41 μg GAE/mL), and ND produced the maximum reducing sugar content (5.79 ± 0.13 mg/mL). This study addresses crucial gap in the post-drying processing of shiitake mushrooms, offering valuable insights for further product development of shiitake mushrooms., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Leaves play a crucial role as ornamental organs in Spathiphyllum , exhibiting distinct differences across various Spathiphyllum varieties. Leaf development is intricately linked to processes of cell proliferation and expansion, with cell morphology often regulated by plant cell walls, primarily composed of cellulose. Alterations in cellulose content can impact cell morphology, subsequently influencing the overall shape of plant organs. Although cellulases have been shown to affect cellulose levels in plant cells, genetic evidence linking them to the regulation of leaf shape remains limited. This study took the leaves of Spathiphyllum 'Mojo' and its somatic variants as the research objects. We screened four cellulase gene family members from the transcriptome and then measured the leaf cellulose content, cellulase activity, and expression levels of cellulase-related genes. Correlation analysis pinpointed the gene SpGH9A3 as closely associated with leaf shape variations in the mutant. Green fluorescent fusion protein assays revealed that the SpGH9A3 protein was localized to the cell membrane. Notably, the expression of the SpGH9A3 gene in mutant leaves peaked during the early spread stage, resulting in smaller overall leaf size and reduced cellulose content upon overexpression in Arabidopsis .

Bioeconomy goals for using biomass feedstock for biofuels and bio-based production has arisen the demand for fungal strains and enzymes for biomass processing. Despite well-known Trichoderma and Aspergillus commercial strains, continuous bioprospecting has revealed the fungal biodiversity potential for production of biomass degrading enzymes. The strain Aspergillus fumigatus LMB-35Aa has revealed a great potential as source of lignocellulose-degrading enzymes. Nevertheless, genetic improvement should be considered to increase its biotechnological potential. Molecular manipulation based on homologous direct recombination (HDR) in filamentous fungi poses a challenge since its low recombination rate. Currently, CRISPR/Cas9-mediated mutagenesis can enable precise and efficient editing of filamentous fungi genomes. In this study, a CRISPR/Cas9-mediated gene editing strategy for improving endoglucanase activity of A. fumigatus LMB-35Aa strain was successfully used, which constitutes the first report of heterologous cellulase production in filamentous fungi using this technology. For this, eglA gene from A. niger ATCC 10,864 was integrated into conidial melanin pksP gene locus, which facilitated the selection of edited events discerned by the emergence of albino colonies. Heterologous production of the EglA enzyme in a biofilm fermentation system resulted in a 40% improvement in endoglucanase activity of the mutant strain compared to the wild type., (© 2024. The Author(s).)

Despite their low quantity and abundance, the cellulolytic bacteria that inhabit the equine large intestine are vital to their host, as they enable the crucial use of forage-based diets. Fibrobacter succinogenes is one of the most important intestinal cellulolytic bacteria. In this study, Fibrobacter sp. HC4, one cellulolytic strain newly isolated from the horse cecum, was characterized for its ability to utilize plant cell wall fibers. Fibrobacter sp. HC4 consumed only cellulose, cellobiose, and glucose and produced succinate and acetate in equal amounts. Among genes coding for CAZymes, 26% of the detected glycoside hydrolases (GHs) were involved in cellulolysis. These cellulases belong to the GH5, GH8, GH9, GH44, GH45, and GH51 families. Both carboxymethyl cellulase and xylanase activities of Fibrobacter sp. HC4 were detected using the Congo red method and were higher than those of F. succinogenes S85, the type strain. The in vitro addition of Fibrobacter sp. HC4 to a fecal microbial ecosystem of horses with large intestinal acidosis significantly enhanced fibrolytic activity as measured by the increase in gas and volatile fatty acids production during the first 48 h. According to this, the pH decreased and the disappearance of dry matter increased at a faster rate with Fibrobacter sp. HC4. Our data suggest a high specialization of the new strain in cellulose degradation. Such a strain could be of interest for future exploitation of its probiotic potential, which needs to be further determined by in vivo studies.IMPORTANCECellulose is the most abundant of plant cell wall fiber and can only be degraded by the large intestine microbiota, resulting in the production of volatile fatty acids that are essential for the host nutrition and health. Consequently, cellulolytic bacteria are of major importance to herbivores. However, these bacteria are challenged by various factors, such as high starch diets, which acidify the ecosystem and reduce their numbers and activity. This can lead to an imbalance in the gut microbiota and digestive problems such as colic, a major cause of mortality in horses. In this work, we characterized a newly isolated cellulolytic strain, Fibrobacter sp. HC4, from the equine intestinal microbiota. Due to its high cellulolytic capacity, reintroduction of this strain into an equine fecal ecosystem stimulates hay fermentation in vitro . Isolating and describing cellulolytic bacteria is a prerequisite for using them as probiotics to restore intestinal balance., Competing Interests: The authors declare no conflict of interest.