Search

Skin tissue engineering is undergoing tremendous expansion as a result from clinical needs, mandatory replacement of animal models and development of new technologies. Many approaches have been used to produce vascularized skin substitutes for grafting purposes showing the presence of capillary-like structures but with limited analysis of their in vitro maturation and plasticity. Such knowledge is however important for the development of tissue substitutes with improved implantation success as well as for validation of vascularization in vitro models, including as a readout in pharmacological analyses. For optimal interactions of cells with microenvironment and vasculature, we here used a cell sheet approach consisting in the sole production of matrix by the cells. In this context, we limited the density of endothelial cells seeded for self-assembly and rather relied on the stimulation of angiogenesis for the development of an extensive connected microvascular-like network. After detailed characterization of this network, we challenged its plasticity both during and after establishment of the skin substitute. We show that fine tuning of VEGF concentration and time of application differentially affects formation of capillary-like structures and their perivascular coverage. Furthermore, we performed a deep wound assay that displayed tissue repair and angiogenesis with unique characteristics of the physiological process. These studies demonstrate the importance of cell-derived microenvironment for the establishment of mature yet dynamic vascularized skin models allowing a wide range of pharmacological and basic investigations. The significant advancements in organ-on-chips and tissue engineering call for more relevant models including microvascularization with remodeling potential. While vascularized skin substitutes have been developed for years, focus has primarily been on the impact of microvascularization on implantation rather than on its in vitro characterization. We here developed a cell sheet-based vascularized skin substitute relying on angiogenesis, i.e. growth of vessel-like structures within the 3D model, rather than solely on endothelial cell self-assembly. We then characterized :1/ vascularization after modulation of angiogenic factor VEGF during the substitute construction; -2/ angiogenesis associated to tissue repair after deep mechanical wounding. These studies establish a solid physiologically relevant model for further investigation of skin cell interactions and in vitro wound healing. [Display omitted] [ABSTRACT FROM AUTHOR]

Autologous oral mucosal epithelial cell sheet (AOMECS) transplantation has recently been applied in human patients to prevent postprocedural stenosis following endoscopic submucosal dissection (ESD) for esophageal squamous cell carcinoma. However, the long-term safety of AOMECS transplantation remains unclear. We evaluated the long-term outcomes of 10 patients who participated in a clinical trial of AOMECS transplantation after esophageal ESD. Additionally, we assessed the local DNA damage response in the esophageal epithelium using p53 binding protein 1 (53BP1) immunofluorescence in post-AOMECS biopsy specimens. The median follow-up period was 118.5 months (range: 46–130 months). Two patients developed primary esophageal cancer near the AOMECS site and successfully underwent additional ESD. One patient developed lymph node metastasis and underwent chemotherapy. None of the patients died from the original disease, although one patient died from unrelated causes. The rate of abnormal 53BP1 nuclear foci, indicative of increased genome instability, increased with the progression of neoplasia in patients post AOMECS. Our case series suggests that AOMECS transplantation provides an acceptable long-term prognosis and 53BP1 foci may serve as a useful marker for assessing DNA instability in the post-AOMECS esophageal epithelium.

Abstract Background A rising population faces challenges with healing-impaired cutaneous wounds, often leading to physical disabilities. Adipose-derived stem cells (ASCs), specifically in the cell sheet format, have emerged as a promising remedy for impaired wound healing. Human platelet lysate (HPL) provides an attractive alternative to fetal bovine serum (FBS) for culturing clinical-grade ASCs. However, the potential of HPL sheets in promoting wound healing has not been fully investigated. This study aimed to explore the anti-fibrotic and pro-angiogenic capabilities of HPL-cultured ASC sheets and delve into the molecular mechanism. Methods A rat burn model was utilized to evaluate the efficacy of HPL-cultured ASC sheets in promoting wound healing. ASC sheets were fabricated with HPL, and those with FBS were included for comparison. Various analyses were conducted to assess the impact of HPL sheets on wound healing. Histological examination of wound tissues provided insights into aspects such as wound closure, collagen deposition, and overall tissue regeneration. Immunofluorescence was employed to assess the presence and distribution of transplanted ASCs after treatment. Further in vitro studies were conducted to decipher the specific factors in HPL sheets contributing to angiogenesis. Results HPL-cultured ASC sheets significantly accelerated wound closure, fostering ample and organized collagen deposition in the neo-dermis. Significantly more retained ASCs were observed in wound tissues treated with HPL sheets compared to the FBS counterparts. Moreover, HPL sheets mitigated macrophage recruitment and decreased subsequent wound tissue fibrosis in vivo. Immunohistochemistry also indicated enhanced angiogenesis in the HPL sheet group. The in vitro analyses showed upregulation of C–C motif chemokine ligand 5 (CCL5) and angiogenin in HPL sheets, including both gene expression and protein secretion. Culturing endothelial cells in the conditioned media compared to media supplemented with CCL5 or angiogenin suggested a correlation between CCL5 and the pro-angiogenic effect of HPL sheets. Additionally, through neutralizing antibody experiments, we further validated the crucial role of CCL5 in HPL sheet-mediated angiogenesis in vitro. Conclusions The present study underscores CCL5 as an essential factor in the pro-angiogenic effect of HPL-cultured ASC sheets during the wound healing process. These findings highlight the potential of HPL-cultured ASC sheets as a promising therapeutic option for healing-impaired cutaneous wounds in clinical settings. Furthermore, the mechanism exploration yields valuable information for optimizing regenerative strategies with ASC products. Brief acknowledgment This research was supported by the National Science and Technology Council, Taiwan (NSTC112-2321-B-002-018), National Taiwan University Hospital (111C-007), and E-Da Hospital-National Taiwan University Hospital Joint Research Program (111-EDN0001, 112-EDN0002).

Introduction: Human umbilical cord-derived mesenchymal stem cells (UC-MSCs) are promising candidates for stem cell therapy. Various methods such as enzymatic treatment, cell scraping, and temperature reduction using temperature-responsive cell culture dishes have been employed to culture and harvest UC-MSCs. However, the effects of different harvesting methods on cell properties and functions in vitro remain unclear. In this study, we investigated the properties and functions of UC-MSC using various cell-harvesting methods. Methods: UC-MSC suspensions were prepared using treatments with various enzymes, cell scraping, and temperature reduction in temperature-responsive cell culture dishes. UC-MSC sheets were prepared in a temperature-responsive cell culture dish. The properties and functions of the UC-MSC suspensions and sheets were assessed according to Annexin V staining, lactate dehydrogenase (LDH) assay, re-adhesion behavior, and cytokine secretion analysis via enzyme-linked immunosorbent assay. Results: Annexin V staining revealed that accutase induced elevated UC-MSC apoptosis. Physical scraping using a cell scraper induced a relatively high LDH release due to damaged cell membranes. Dispase exhibited relatively low adhesion from initial incubation until 3 h. UC-MSC sheets exhibited rapid re-adhesion at 15 min and cell migration at 6 h. UC-MSC sheets expressed higher levels of cytokines such as HGF, TGF-β1, IL-10, and IL-6 than did UC-MSCs in suspension. Conclusions: The choice of enzyme and physical scraping methods for harvesting UC-MSCs significantly influenced their activity and function. Thus, selecting appropriate cell-harvesting methods is important for successful stem cell therapy.

BACKGROUND: Myocardial patches are used as an effective way to repair damaged myocardium, and there is controversy over which cells to use to make myocardial patches and how to maximize the therapeutic effect of myocardial patches in vivo. OBJECTIVE: To find out the best way to make myocardial patches by overviewing the cellular sources of myocardial patches and strategies for perfecting them. METHODS: The first author searched PubMed and Web of Science databases by using “cell sheet, cell patch, cardiomyocytes, cardiac progenitor cells, fibroblasts, embryonic stem cell, mesenchymal stem cells” as English search terms, and searched CNKI and Wanfang databases by using “myocardial patch, biological 3D printing, myocardial” as Chinese search terms. After enrollment screening, 94 articles were ultimately included in the result analysis. RESULTS AND CONCLUSION: (1) The cellular sources of myocardial patches are mainly divided into three categories: somatic cells, monoenergetic stem cells, and pluripotent stem cells, respectively. There are rich sources of cells for myocardial patches, but not all of them are suitable for making myocardial patches, e.g., myocardial patches made from fibroblasts and skeletal myoblasts carry a risk of arrhythmogenicity, and mesenchymal stem cells have a short in vivo duration of action and ethical concerns. With the discovery of induced multifunctional stem cells, a reliable source of cells for making myocardial patches is available. (2) There are two methods of making myocardial patches. One is using cell sheet technology. The other is using biological 3D printing technology. Cell sheet technology can preserve the extracellular matrix components intact and can maximally mimic the cell growth ring in vivo. However, it is still difficult to obtain myocardial patches with three-dimensional structure by cell sheet technology. Biologicasl 3D printing technology, however, can be used to obtain myocardial patches with three-dimensional structures through computerized personalized design. (3) The strategies for perfecting myocardial patches mainly include: making myocardial patches after co-cultivation of multiple cells, improving the ink formulation and scaffold composition in biological 3D printing technology, improving the therapeutic effect of myocardial patches, suppressing immune rejection after transplantation, and perfecting the differentiation and cultivation protocols of stem cells. (4) There is no optimal cell source or method for making myocardial patches, and myocardial patches obtained from a particular cell or technique alone often do not achieve the desired therapeutic effect. Therefore, researchers need to choose the appropriate strategy for making myocardial patches based on the desired therapeutic effect before making them. [ABSTRACT FROM AUTHOR]

Background: A rising population faces challenges with healing-impaired cutaneous wounds, often leading to physical disabilities. Adipose-derived stem cells (ASCs), specifically in the cell sheet format, have emerged as a promising remedy for impaired wound healing. Human platelet lysate (HPL) provides an attractive alternative to fetal bovine serum (FBS) for culturing clinical-grade ASCs. However, the potential of HPL sheets in promoting wound healing has not been fully investigated. This study aimed to explore the anti-fibrotic and pro-angiogenic capabilities of HPL-cultured ASC sheets and delve into the molecular mechanism. Methods: A rat burn model was utilized to evaluate the efficacy of HPL-cultured ASC sheets in promoting wound healing. ASC sheets were fabricated with HPL, and those with FBS were included for comparison. Various analyses were conducted to assess the impact of HPL sheets on wound healing. Histological examination of wound tissues provided insights into aspects such as wound closure, collagen deposition, and overall tissue regeneration. Immunofluorescence was employed to assess the presence and distribution of transplanted ASCs after treatment. Further in vitro studies were conducted to decipher the specific factors in HPL sheets contributing to angiogenesis. Results: HPL-cultured ASC sheets significantly accelerated wound closure, fostering ample and organized collagen deposition in the neo-dermis. Significantly more retained ASCs were observed in wound tissues treated with HPL sheets compared to the FBS counterparts. Moreover, HPL sheets mitigated macrophage recruitment and decreased subsequent wound tissue fibrosis in vivo. Immunohistochemistry also indicated enhanced angiogenesis in the HPL sheet group. The in vitro analyses showed upregulation of C–C motif chemokine ligand 5 (CCL5) and angiogenin in HPL sheets, including both gene expression and protein secretion. Culturing endothelial cells in the conditioned media compared to media supplemented with CCL5 or angiogenin suggested a correlation between CCL5 and the pro-angiogenic effect of HPL sheets. Additionally, through neutralizing antibody experiments, we further validated the crucial role of CCL5 in HPL sheet-mediated angiogenesis in vitro. Conclusions: The present study underscores CCL5 as an essential factor in the pro-angiogenic effect of HPL-cultured ASC sheets during the wound healing process. These findings highlight the potential of HPL-cultured ASC sheets as a promising therapeutic option for healing-impaired cutaneous wounds in clinical settings. Furthermore, the mechanism exploration yields valuable information for optimizing regenerative strategies with ASC products. Brief acknowledgment: This research was supported by the National Science and Technology Council, Taiwan (NSTC112-2321-B-002-018), National Taiwan University Hospital (111C-007), and E-Da Hospital-National Taiwan University Hospital Joint Research Program (111-EDN0001, 112-EDN0002). [ABSTRACT FROM AUTHOR]

Abstract Background Pulmonary air leaks (PALs) due to visceral pleura injury during surgery is frequently observed after pulmonary resections and the complication is difficult to avoid in thoracic surgery. The development of postoperative PALs is the most common cause of prolonged hospitalization. Previously, we reported that PALs sealants using autologous dermal fibroblast sheets (DFSs) harvested from temperature-responsive culture dishes successfully closed intraoperative PALs during lung resection. Objective In this study, we investigated the fate of human DFSs xenogenetically transplanted onto lung surfaces to seal PALs of immunocompromised rat. Dual-color FISH analyses of human fibroblast was employed to detect transplantation human cells on the lung surface. Results One month after transplantation, FISH analyses revealed that transplanted human fibroblasts still composed a sheet-structure, and histology also showed that beneath the sheet’s angiogenesis migrating into the sheets was observed from the recipient tissues. FISH analyses revealed that even at 3 months after transplantation, the transplanted human fibroblasts still remained in the sheet. Dual-color FISH analyses of the transplanted human fibroblasts were sparsely present as a result of the cells reaching the end of their lifespan, the cells producing extracellular matrix, and remained inside the cell sheet and did not invade the lungs of the host. Conclusions DFS-transplanted human fibroblasts showed that they are retained within cell sheets and do not invade the lungs of the host.

AIM: To explore the synthesis of thermo-sensitive poly N-isopropylacry-lamide(PNIPAAm)and the petri dish grafted with PNIPAAm hydrogels by the electron accelerator, as well as the growth conditions and the biological characteristics of rabbit corneal stromal cells on thermo-sensitive PNIPAAm hydrogels, and the cell sheets obtained from the PNIPAAm hydrogels.METHODS: NIPAAm monomer was dissolved in 2-propanol at concentrations of 55% with 0.5% N,N'-Methylenebisacry-lamide(MBA). Solution(70 μL)was added and spread uniformly over 35 mm petri dish. These dishes were immediately subjected to irradiation. After follow-up treatment, rabbit corneal stromal cells were cultured on thermo-sensitive petri dish in vitro.RESULTS: According to the monomer formula and radiation synthesis scheme in this experiment, PNIPAAm can be synthesized on the surface of the petri dish. Rabbit corneal stromal cells grew well in the thermo- sensitive surface and can be separated into sheets.CONCLUSION: The single and multilayer carrier-free cell sheets can be obtained from the use of thermo-sensitive petri dish.

Background: Pulmonary air leaks (PALs) due to visceral pleura injury during surgery is frequently observed after pulmonary resections and the complication is difficult to avoid in thoracic surgery. The development of postoperative PALs is the most common cause of prolonged hospitalization. Previously, we reported that PALs sealants using autologous dermal fibroblast sheets (DFSs) harvested from temperature-responsive culture dishes successfully closed intraoperative PALs during lung resection. Objective: In this study, we investigated the fate of human DFSs xenogenetically transplanted onto lung surfaces to seal PALs of immunocompromised rat. Dual-color FISH analyses of human fibroblast was employed to detect transplantation human cells on the lung surface. Results: One month after transplantation, FISH analyses revealed that transplanted human fibroblasts still composed a sheet-structure, and histology also showed that beneath the sheet's angiogenesis migrating into the sheets was observed from the recipient tissues. FISH analyses revealed that even at 3 months after transplantation, the transplanted human fibroblasts still remained in the sheet. Dual-color FISH analyses of the transplanted human fibroblasts were sparsely present as a result of the cells reaching the end of their lifespan, the cells producing extracellular matrix, and remained inside the cell sheet and did not invade the lungs of the host. Conclusions: DFS-transplanted human fibroblasts showed that they are retained within cell sheets and do not invade the lungs of the host. [ABSTRACT FROM AUTHOR]

As a living repair material, cell sheet exhibits significant potential in wound repair. Nonetheless, wound healing is a complicated and protracted process that necessitates specific repair functions at each stage, including hemostasis and antibacterial activity. In this work, on the basis of harvesting the cell sheet via a photothermal response strategy, a fibronectin attached cell sheet (FACS) is prepared to enhance its wound repair capability. For this purpose, the azide group (N3) is initially tagged onto the cell surface through metabolic glycoengineering of unnatural sugars, and then the conjugate (DBCO‐fibronectin) comprises of the dibenzocyclooctyne (DBCO) and fibronectin with multiple wound repair functions is linked to N3 using click chemistry. Biological evaluations following this demonstrates that the FACS preparation exhibits excellent biocompatibility, and the fibronectin modification enhances the capacity for cell proliferation and migration. Moreover, in vivo wound healing experiment confirms the reparative efficacy of FACS. It not only has a wound closure rate 1.46 times that of a conventional cell sheet but also reduces inflammatory cell infiltration, promotes hair follicle and blood vessel regeneration, and encourages collagen deposition. This strategy holds enormous clinical potential and paves the way for advanced functional modifications of cell sheets. [ABSTRACT FROM AUTHOR]

Hepatic tissue engineering has been applied for the treatment of intractable liver diseases, and hepatocyte sheets are promising for this purpose. However, hepatocyte sheets have poor survival after transplantation because of their high metabolic activity. In this study, we aimed to develop basic fibroblast growth factor (bFGF)-releasing nanoparticles to prolong the survival of hepatocyte sheets after transplantation. The nanoparticles were prepared by electrospraying a bFGF-dispersed poly(D, l -lactide- co -glycolide) emulsion. bFGF-loaded PLGA nanoparticles can be developed by optimizing the applied electrospray voltage and the oil:water ratio of the emulsion. The prepared nanoparticles exhibited prompt release at the initial duration and continuous gradual release at the subsequent duration. Hepatocyte sheet engraftment was evaluated by transplanting hepatocyte sheets containing the prepared nanoparticles into rats. The hepatocyte sheets with the prepared nanoparticles exhibited longer survival than those without the bFGF nanoparticles or solution owing to the local and continuous release of bFGF from the nanoparticles and the subsequent enhanced angiogenesis at the transplantation site. These results indicated that the prepared bFGF-releasing nanoparticles can enhance the efficiency of hepatocyte sheet transplantation. The developed bFGF-releasing nanoparticles would be useful for the transplantation of cellular tissue with post-transplantation survival challenges. [Display omitted] [ABSTRACT FROM AUTHOR]

Tendon and ligament injuries account for a substantial proportion of disorders in the musculoskeletal system. While non-operative and operative treatment strategies have advanced, the restoration of native tendon and ligament structures after injury is still challenging due to its innate limited regenerative ability. Cell sheet technology is an innovative tool for tissue fabrication and cell transplantation in regenerative medicine. In this review, we first summarize different harvesting procedures and advantages of cell sheet technology, which preserves intact cell-to-cell connections and extracellular matrix. We then describe the recent progress of cell sheet technology from preclinical studies, focusing on the application of stem cell-derived sheets in treating tendon and ligament injuries, as well as highlighting its effects on mitigating inflammation and promoting tendon/graft-bone interface healing. Finally, we discuss several prerequisites for future clinical translation including the selection of appropriate cell source, optimization of preparation process, establishment of suitable animal model, and the fabrication of vascularized complex tissue. We believe this review could potentially provoke new ideas and drive the development of more functional biomimetic tissues using cell sheet technology to meet the needs of clinical patients. [ABSTRACT FROM AUTHOR]

Premature ovarian insufficiency (POI) is defined as the development of hypergonadotropic hypogonadism before the age of 40 with definitive treatment being absent. In the current study, we aim to compare the efficacy of the cell sheet method with an intravenous (IV) application of adipose-derived mesenchymal stem cells (AdMSCs) to the POI with an animal model. In the current prospective study, 6-to-8-week-old Sprague Dawley rats were generated four groups: (i) a control group in which only PBS was administered; (ii) an only-POI group generated by cyclophosphamide; (iii) a POI group treated by way of IV AdMSCs; and (iv) a POI group treated by way of the cell sheet method. Twenty-eight days after an oophorectomy was performed, intracardiac blood was taken. Follicle count, immunohistochemical examination for GDF9, BMP15, and TUNEL were conducted, gene expressions of GDF9 and BMP15 were examined, and E2 was measured in the serum samples. With hematoxylin-eosin, in the third group, multi oocytes follicles were the most remarkable finding. In the fourth group, most of the follicles presented normal morphology. GDF9 involvement was similar between the first and fourth groups. BMP-15 immunoreactivity, in contrast to fourth group, was weak in all stages in the second and third groups. The current attempt represents a pioneer study in the literature in which a cell sheet method is used for the first time in a POI model. These results suggest that the cell sheet method may be a feasible and efficient method for the stem cell treatment of models with POI and could be a new treatment approach in POI. [ABSTRACT FROM AUTHOR]

Cell sheet (CS) engineering using mesenchymal stromal cells (MSC) draws significant interest for regenerative medicine and this approach translates to clinical use for numerous indications. However, little is known of factors that define the timing of CS assembly from primary cultures. This aspect is important for planning CS delivery in autologous and allogeneic modes of use. We used a comparative in vitro approach with primary donors' (n = 14) adipose-derived MSCs and evaluated the impact of healthy subject's sex, MSC culture features (population doubling time and lag-phase), and extracellular matrix (ECM) composition along with factors related to connective tissue formations (α-SMA and FAP-α) on CS assembly duration. Using qualitative and quantitative analysis methods, we found that, in seeded MSCs, high contents of collagen I and collagen IV had a direct correlation with longer CS assembly duration. We found that short lag-phase cultures faster turned to a ready-to-use CS, while age, sex, fibronectin, laminin, α-SMA, and FAP-α failed to provide a significant correlation with the timing of assembly. In detachable CSs, FAP-α was negatively correlated with the duration of assembly, suggesting that its concentration rose over time and contributed to MSC activation, transitioning to α-SMA-positive myofibroblasts and ECM turnover. Preliminary data on cell density and collagen I deposition suggested that the TGF-β1 signaling axis is of pivotal importance for ECM composition and construct maturation. [ABSTRACT FROM AUTHOR]

Urethral stricture (US) is a common disease in urology, lacking effective treatment options. Although injecting a stem cells suspension into the affected area has shown therapeutic benefits, challenges such as low retention rate and limited efficacy hinder the clinical application of stem cells. This study evaluates the therapeutic impact and the mechanism of adipose-derived vascular fraction (SVF) combined with cell sheet engineering technique on urethral fibrosis in a rat model of US. The results showed that SVF-cell sheets exhibit positive expression of α-SMA, CD31, CD34, Stro-1, and eNOS. In vivo study showed less collagen deposition, low urethral fibrosis, and minimal tissue alteration in the group receiving cell sheet transplantation. Furthermore, the formation of a three-dimensional (3D) tissue-like structure by the cell sheets enhances the paracrine effect of SVF, facilitates the infiltration of M2 macrophages, and suppresses the TGF-β/Smad2 pathway through HGF secretion, thereby exerting antifibrotic effects. Small animal in vivo imaging demonstrates improved retention of SVF cells at the damaged urethra site with cell sheet application. Our results suggest that SVF combined with cell sheet technology more efficiently inhibits the early stages of urethral fibrosis.

Abstract As a living repair material, cell sheet exhibits significant potential in wound repair. Nonetheless, wound healing is a complicated and protracted process that necessitates specific repair functions at each stage, including hemostasis and antibacterial activity. In this work, on the basis of harvesting the cell sheet via a photothermal response strategy, a fibronectin attached cell sheet (FACS) is prepared to enhance its wound repair capability. For this purpose, the azide group (N3) is initially tagged onto the cell surface through metabolic glycoengineering of unnatural sugars, and then the conjugate (DBCO‐fibronectin) comprises of the dibenzocyclooctyne (DBCO) and fibronectin with multiple wound repair functions is linked to N3 using click chemistry. Biological evaluations following this demonstrates that the FACS preparation exhibits excellent biocompatibility, and the fibronectin modification enhances the capacity for cell proliferation and migration. Moreover, in vivo wound healing experiment confirms the reparative efficacy of FACS. It not only has a wound closure rate 1.46 times that of a conventional cell sheet but also reduces inflammatory cell infiltration, promotes hair follicle and blood vessel regeneration, and encourages collagen deposition. This strategy holds enormous clinical potential and paves the way for advanced functional modifications of cell sheets.

Tissue engineering scaffolds with specific surface topographical morphologies can regulate cellular behaviors and promote tissue repair. In this study, poly lactic(co-glycolic acid) (PLGA)/wool keratin composite guided tissue regeneration (GTR) membranes with three types of microtopographies (three groups each of pits, grooves and columns, thus nine groups in total) were prepared. Then, the effects of the nine groups of membranes on cell adhesion, proliferation and osteogenic differentiation were examined. The nine different membranes had clear, regular and uniform surface topographical morphologies. The 2 µm pit-structured membrane had the best effect on promoting the proliferation of bone marrow mesenchymal stem cells (BMSCs) and periodontal ligament stem cells (PDLSCs), while the 10 µm groove-structured membrane was the best for inducing osteogenic differentiation of BMSCs and PDLSCs. Then, we investigated the ectopic osteogenic, guided bone tissue regeneration and guided periodontal tissue regeneration effects of the 10 µm groove-structured membrane combined with cells or cell sheets. The 10 µm groove-structured membrane/cell complex had good compatibility and certain ectopic osteogenic effects, and the 10 µm groove-structured membrane/cell sheet complex promoted better bone repair and regeneration and periodontal tissue regeneration. Thus, the 10 µm groove-structured membrane shows potential to treat bone defects and periodontal disease. PLGA/wool keratin composite GTR membranes with microcolumn, micropit and microgroove topographical morphologies were prepared by dry etching technology and the solvent casting method. The composite GTR membranes had different effects on cell behavior. The 2 µm pit-structured membrane had the best effect on promoting the proliferation of rabbit BMSCs and PDLSCs and the 10 µm groove-structured membrane was the best for inducing the osteogenic differentiation of BMSCs and PDLSCs. The combined application of a 10 µm groove-structured membrane and PDLSC sheet can promote better bone repair and regeneration as well as periodontal tissue regeneration. Our findings may have significant potential for guiding the design of future GTR membranes with topographical morphologies and clinical applications of the groove-structured membrane/cell sheet complex. [Display omitted] [ABSTRACT FROM AUTHOR]

Abstract Tissue engineering combines cell biology and material science to construct tissues or organs for disease modeling, drug testing, and regenerative medicine. The cell sheet is a newly developed tissue engineering technology that has brought about scaffold-free tissue and shows great application potential. In this review, we summarized recent progress and future possibilities in preclinical research into and clinical applications of cell sheets fabricated by differing cell types from various sources for cardiac tissue repair, and the manufacturing strategies and promising application potential of 3D cell-dense tissue constructed from cell sheets. Special attention was paid to the mechanisms of mesenchymal stem cell (MSC) sheets in the prevention of myocardial ischemia and left ventricle remodeling. Comparing MSCs sheets with other types of cell sheets and 3D cardiac tissues, engineering tissues' potential safety and effectiveness concerns were also discussed.

With the development of tissue engineering and regenerative medicine, prevascularized bone marrow mesenchymal stem cell (BMSC) sheets have been regarded as a promising method for tissue regeneration. Furthermore, the inflammatory response is one of the main regulators of vascularization and the restoration of engineered tissue function; among them, macrophages and cytokines produced by them are considered to be the decisive factors of the downstream outcomes. This study investigated the effect of macrophages on the formation of microvascular-like structures of human umbilical vein endothelial cells (HUVECs) in BMSC sheets. First, a human monocytic leukemia cell line (THP-1 cells) was differentiated into derived macrophages (M0) with phorbol 12-myristate 13-acetate and further activated into proinflammatory macrophages (M1 macrophages) with interferon-γ and lipopolysaccharide or anti-inflammatory macrophages (M2 macrophages) with interleukin-4. Then, HUVECs and prevascularized sheets were treated with conditioned media (CM) from different macrophages, and the impact of macrophage phenotypes on vascularized network formation in prevascularized cell sheets was examined by hematoxylin and eosin staining, CD31 immunofluorescence staining and enzyme-linked immunosorbent assay. Our study showed that macrophages may guide the arrangement of endothelial cells through a paracrine pathway. Cell sheets that were cultured in the CM from M2 macrophages were thinner than those cultured in other media. At various time points, the levels of tumor necrosis factor alpha and vascular endothelial growth factor in prevascularized sheets cultured with CM(M1) was higher than that in sheets cultured with other media; however, the levels of platelet-derived growth factor in prevascularized sheets cultured with CM(M2) was higher than that in sheets cultured with other media. These findings suggest that the paracrine effect of macrophages can influence the formation of microvascular networks in prevascularized sheets by regulating the arrangement of cells, the thickness of the cell sheet and the secretion of cytokines related to angiogenesis. Macrophages with different phenotypes have unique effects on prevascularized sheets. [ABSTRACT FROM AUTHOR]

Tissue engineers have utilised a variety of three-dimensional (3D) scaffolds for controlling multicellular dynamics and the resulting tissue microstructures. In particular, cutting-edge microfabrication technologies, such as 3D bioprinting, provide increasingly complex structures. However, unpredictable microtissue detachment from scaffolds, which ruins desired tissue structures, is becoming an evident problem. To overcome this issue, we elucidated the mechanism underlying collective cellular detachment by combining a new computational simulation method with quantitative tissue-culture experiments. We first quantified the stochastic processes of cellular detachment shown by vascular smooth muscle cells on model curved scaffolds and found that microtissue morphologies vary drastically depending on cell contractility, substrate curvature, and cell-substrate adhesion strength. To explore this mechanism, we developed a new particle-based model that explicitly describes stochastic processes of multicellular dynamics, such as adhesion, rupture, and large deformation of microtissues on structured surfaces. Computational simulations using the developed model successfully reproduced characteristic detachment processes observed in experiments. Crucially, simulations revealed that cellular contractility-induced stress is locally concentrated at the cell-substrate interface, subsequently inducing a catastrophic process of collective cellular detachment, which can be suppressed by modulating cell contractility, substrate curvature, and cell-substrate adhesion. These results show that the developed computational method is useful for predicting engineered tissue dynamics as a platform for prediction-guided scaffold design. Microfabrication technologies aiming to control multicellular dynamics by engineering 3D scaffolds are attracting increasing attention for modelling in cell biology and regenerative medicine. However, obtaining microtissues with the desired 3D structures is made considerably more difficult by microtissue detachments from scaffolds. This study reveals a key mechanism behind this detachment by developing a novel computational method for simulating multicellular dynamics on designed scaffolds. This method enabled us to predict microtissue dynamics on structured surfaces, based on cell mechanics, substrate geometry, and cell-substrate interaction. This study provides a platform for the physics-based design of micro-engineered scaffolds and thus contributes to prediction-guided biomaterials design in the future. [Display omitted] [ABSTRACT FROM AUTHOR]

Background and Objectives: Osteoporosis (OP) and periodontitis are both diseases with excessive bone resorption, and the number of patients who suffer from these diseases is expected to increase. OP has been identified as a risk factor that accelerates the pathological process of periodontitis. Achieving effective and safe periodontal regeneration in OP patients is a meaningful challenge. This study aimed to assess the efficacy and biosecurity of human cementum protein 1 (hCEMP1) gene‐modified cell sheets for periodontal fenestration defect regeneration in an OP rat model. Materials and Methods: Rat adipose‐derived mesenchymal stem cells (rADSCs) were isolated from Sprague–Dawley rats. After primary culture, rADSCs were subjected to cell surface analysis and multi‐differentiation assay. And rADSCs were transduced with hCEMP1 by lentiviral vector, and hCEMP1 gene‐modified cell sheets were generated. The expression of hCEMP1 was evaluated by reverse transcription polymerase chain reaction and immunocytochemistry staining, and transduced cell proliferation was evaluated by Cell Counting Kit‐8. The hCEMP1 gene‐modified cell sheet structure was detected by histological analysis and scanning electron microscopy. Osteogenic and cementogenic‐associated gene expression was evaluated by real‐time quantitative polymerase chain reaction. In addition, an OP rat periodontal fenestration defect model was used to evaluate the regeneration effect of hCEMP1 gene‐modified rADSC sheets. The efficacy was assessed with microcomputed tomography and histology, and the biosecurity of gene‐modified cell sheets was evaluated by histological analysis of the spleen, liver, kidney and lung. Results: The rADSCs showed a phenotype of mesenchymal stem cells and possessed multi‐differentiation capacity. The gene and protein expression of hCEMP1 through lentiviral transduction was confirmed, and there was no significant effect on rADSC proliferation. Overexpression of hCEMP1 upregulated osteogenic and cementogenic‐related genes such as runt‐related transcription factor 2, bone morphogenetic protein 2, secreted phosphoprotein 1 and cementum attachment protein in the gene‐modified cell sheets. The fenestration lesions in OP rats treated with hCEMP1 gene‐modified cell sheets exhibited complete bone bridging, cementum and periodontal ligament formation. Furthermore, histological sections of the spleen, liver, kidney and lung showed no evident pathological damage. Conclusion: This pilot study demonstrates that hCEMP1 gene‐modified rADSC sheets have a marked ability to enhance periodontal regeneration in OP rats. Thus, this approach may represent an effective and safe strategy for periodontal disease patients with OP. [ABSTRACT FROM AUTHOR]

Adipose-derived stem cells (ADSCs) have been studied for many years as a therapeutic option for osteoarthritis (OA); however, their efficacy remains insufficient. Since platelet-rich plasma (PRP) induces chondrogenic differentiation in ADSCs and the formation of a sheet structure by ascorbic acid can increase the number of viable cells, we hypothesized that the injection of chondrogenic cell sheets combined with the effects of PRP and ascorbic acid may hinder the progression of OA. The effects of induction of differentiation by PRP and formation of sheet structure by ascorbic acid on changes in chondrocyte markers (collagen II, aggrecan, Sox9) in ADSCs were evaluated. Changes in mucopolysaccharide and VEGF-A secretion from cells injected intra-articularly in a rabbit OA model were also evaluated. ADSCs treated by PRP strongly chondrocyte markers, including type II collagen, Sox9, and aggrecan, and their gene expression was maintained even after sheet-like structure formation induced by ascorbic acid. In this rabbit OA model study, the inhibition of OA progression by intra-articular injection was improved by inducing chondrocyte differentiation with PRP and sheet structure formation with ascorbic acid in ADSCs. [ABSTRACT FROM AUTHOR]

Tissue engineering combines cell biology and material science to construct tissues or organs for disease modeling, drug testing, and regenerative medicine. The cell sheet is a newly developed tissue engineering technology that has brought about scaffold-free tissue and shows great application potential. In this review, we summarized recent progress and future possibilities in preclinical research into and clinical applications of cell sheets fabricated by differing cell types from various sources for cardiac tissue repair, and the manufacturing strategies and promising application potential of 3D cell-dense tissue constructed from cell sheets. Special attention was paid to the mechanisms of mesenchymal stem cell (MSC) sheets in the prevention of myocardial ischemia and left ventricle remodeling. Comparing MSCs sheets with other types of cell sheets and 3D cardiac tissues, engineering tissues' potential safety and effectiveness concerns were also discussed. [ABSTRACT FROM AUTHOR]

Organ transplantation is the first and most effective treatment for missing or damaged tissues or organs. However, there is a need to establish an alternative treatment method for organ transplantation due to the shortage of donors and viral infections. Rheinwald and Green et al. established epidermal cell culture technology and successfully transplanted human-cultured skin into severely diseased patients. Eventually, artificial cell sheets of cultured skin were created, targeting various tissues and organs, including epithelial sheets, chondrocyte sheets, and myoblast cell sheets. These sheets have been successfully used for clinical applications. Extracellular matrix hydrogels (collagen, elastin, fibronectin, and laminin), thermoresponsive polymers, and vitrified hydrogel membranes have been used as scaffold materials to prepare cell sheets. Collagen is a major structural component of basement membranes and tissue scaffold proteins. Collagen hydrogel membranes (collagen vitrigel), created from collagen hydrogels through a vitrification process, are composed of high-density collagen fibers and are expected to be used as carriers for transplantation. In this review, the essential technologies for cell sheet implantation are described, including cell sheets, vitrified hydrogel membranes, and their cryopreservation applications in regenerative medicine. [ABSTRACT FROM AUTHOR]

In this study, a biological conduit, consisting of an adipocyte-derived mesenchymal stem cell (AdMSCs) sheet and amniotic membrane (AM), was designed for the reconstruction of peripheral nerve defects. To evaluate the effect of the produced conduit on neural regeneration, a 10-mm sciatic nerve defect was created in rats, and experiments were carried out on six groups, i.e., sham control group (SC), negative control group (NC), nerve autograft group (NG), the biological conduit (AdMSCs + AM) group, the commercial PGA tube conduit (PGA) group, and the conduit only consisting of AM (AM) group. The effects of different nerve repair methods on the peripheral nerve and gastrocnemius muscle were evaluated by functional, histological, and immunohistochemical tests. When the number of myelinated axons was compared between the groups of AdMSCs + AM and PGA, it was higher in the AdMSCs + AM group (p < 0.05). The percentage of gastrocnemius collagen bundle area of AdMSCs + AM group was found to be statistically lower than the PGA group (p < 0.05). The muscle fiber diameter of AdMSCs + AM group was lower than that of the NG group, but significantly higher than that of the PGA group and the AM group (p < 0.001). Muscle weight index was significantly higher in the AdMSCs + AM group compared to the PGA group (p < 0.05). It was observed that nerve regeneration was faster in the AdMSCs + AM group, and there was an earlier improvement in pin-prick score and sciatic functional index compared to the PGA group and the AM group. In conclusion, the biological conduit prepared from the AdMSCs sheet and AM is regarded as a new biological conduit that can be used as an alternative treatment method to nerve autograft in clinical applications. [ABSTRACT FROM AUTHOR]

This work aimed to design a multifunctional biphasic 3D scaffold for periodontal tissue regeneration. A 3D fibrous scaffold made from medical-grade poly (ε-caprolactone) (PCL) with high porosity (>90%) and well-oriented fibres was fabricated by a custom design melt electrowriting (MEW) device. A biomimetic process was employed to form a bioactive calcium phosphate (CaP) layer with nanostructure (nanoflakes-like) morphology onto the 3D MEW fibrous surface to stimulate rapid bone formation. Primary human osteoblasts (hOBs) were seeded within the coated 3D fibrous scaffolds for 28 days to acquire the bone compartment of the tissue-engineered construct (TEC). The biphasic construct was obtained by placing an established in vitro periodontal ligament (PDL) cell sheet onto the surface of the bone compartment. Subsequently, a decellularized multiphasic TEC by exploiting a lyophilization approach was obtained. Laser scanning confocal microscopy and scanning electron microscopy confirmed the retention of a functional extracellular matrix within the PDL and bone compartments following scaffold decellularization and lyophilization processes. These findings suggest that lyophilized decellularized biphasic 3D constructs with high porosity constitute a viable 'off the shelf' strategy for developing an extracellular matrix-based product to facilitate periodontal regeneration. [ABSTRACT FROM AUTHOR]

Cell sheet (CS) engineering using mesenchymal stromal cells (MSC) draws significant interest for regenerative medicine and this approach translates to clinical use for numerous indications. However, little is known of factors that define the timing of CS assembly from primary cultures. This aspect is important for planning CS delivery in autologous and allogeneic modes of use. We used a comparative in vitro approach with primary donors’ (n = 14) adipose-derived MSCs and evaluated the impact of healthy subject’s sex, MSC culture features (population doubling time and lag-phase), and extracellular matrix (ECM) composition along with factors related to connective tissue formations (α-SMA and FAP-α) on CS assembly duration. Using qualitative and quantitative analysis methods, we found that, in seeded MSCs, high contents of collagen I and collagen IV had a direct correlation with longer CS assembly duration. We found that short lag-phase cultures faster turned to a ready-to-use CS, while age, sex, fibronectin, laminin, α-SMA, and FAP-α failed to provide a significant correlation with the timing of assembly. In detachable CSs, FAP-α was negatively correlated with the duration of assembly, suggesting that its concentration rose over time and contributed to MSC activation, transitioning to α-SMA-positive myofibroblasts and ECM turnover. Preliminary data on cell density and collagen I deposition suggested that the TGF-β1 signaling axis is of pivotal importance for ECM composition and construct maturation.

Abstract Background Adipose-derived stem cell (ASC) has been considered as a desirable source for cell therapy. In contrast to combining scaffold materials with cells, ASCs can be fabricated into scaffold-free three-dimensional (3D) constructs to promote regeneration at tissue level. However, previous reports have found decreased expression of vascular endothelial growth factor (VEGF) in ASC sheets. In this study, we aimed to integrate ASC spheroids into ASC sheets to enhance the angiogenic capability of cell sheets. Methods ASCs were seeded in agarose microwells to generate uniform cell spheroids with adjustable size, while extracellular matrix deposition could be stimulated by ascorbic acid 2-phosphate to form ASC sheets. RNA sequencing was performed to identify the transcriptomic profiles of ASC spheroids and sheets relative to monolayer ASCs. By transferring ASC spheroids onto ASC sheets, the spheroid sheet composites could be successfully fabricated after a short-term co-culture, and their angiogenic potential was evaluated in vitro and in ovo. Results RNA sequencing analysis revealed that upregulation of angiogenesis-related genes was found only in ASC spheroids. The stimulating effect of spheroid formation on ASCs toward endothelial lineage was demonstrated by enhanced CD31 expression, which maintained after ASC spheroids were seeded on cell sheets. Relative to ASC sheets, enhanced expression of VEGF and hepatocyte growth factor was also noted in ASC spheroid sheets, and conditioned medium of ASC spheroid sheets significantly enhanced tube formation of endothelial cells in vitro. Moreover, chick embryo chorioallantoic membrane assay showed a significantly higher capillary density with more branch points after applying ASC spheroid sheets, and immunohistochemistry also revealed a significantly higher ratio of CD31-positive area. Conclusion In the spheroid sheet construct, ASC spheroids can augment the pro-angiogenesis capability of ASC sheets without the use of exogenous biomaterial or genetic manipulation. The strategy of this composite system holds promise as an advance in 3D culture technique of ASCs for future application in angiogenesis and regeneration therapies.

Abstract Background Human umbilical cord mesenchymal stem cells (hUC-MSCs) have been widely used due to their multipotency, a broad range of sources, painless collection, and compliance with standard amplification. Cell sheet technology is a tissue engineering methodology requiring scaffolds free, and it provides an effective method for cell transplantation. To improve the therapeutic efficacy, we combined hUC-MSCs with cell sheet technology to evaluate the safety and efficacy of hUC-MSC sheets in preclinical studies using appropriate animal models. Methods hUC-MSC sheets were fabricated by hUC-MSCs from a cell bank established by a standard operation process and quality control. Cytokine secretion, immunoregulation, and angiopoiesis were evaluated in vitro. Oncogenicity and cell diffusion assays of hUC-MSC sheets were conducted to verify the safety of hUC-MSCs sheet transplantation in mice. To provide more meaningful animal experimental data for clinical trials, porcine myocardial infarction (MI) models were established by constriction of the left circumflex, and hUC-MSC sheets were transplanted onto the ischemic area of the heart tissue. Cardiac function was evaluated and compared between the experimental and MI groups. Results The in vitro results showed that hUC-MSC sheets could secrete multiple cellular factors, including VEGF, HGF, IL-6, and IL-8. Peripheral blood mononuclear cells had a lower proliferation rate and lower TNF-α secretion when co-cultured with hUC-MSC sheets. TH1 cells had a smaller proportion after activation. In vivo safety results showed that the hUC-MSCs sheet had no oncogenicity and was mainly distributed on the surface of the ischemic myocardial tissue. Echocardiography showed that hUC-MSC sheets effectively improved the left ventricular ejection fraction (LVEF), and the LVEF significantly changed (42.25 ± 1.23% vs. 66.9 ± 1.10%) in the hUC-MSC transplantation group compared with the MI group (42.52 ± 0.65% vs. 39.55 ± 1.97%) at 9 weeks. The infarct ratio of the hUC-MSCs sheet transplantation groups was also significantly reduced (14.2 ± 4.53% vs. 4.00 ± 2.00%) compared with that of the MI group. Conclusion Allogeneic source and cell bank established by the standard operation process and quality control make hUC-MSCs sheet possible to treat MI by off-the-shelf drug with universal quality instead of individualized medical technology.

Although mesenchymal stem cell (MSC)-based regenerative therapy is being developed for the treatment of kidney diseases, cell delivery and engraftment still need to be improved. Cell sheet technology has been developed as a new cell delivery method, to recover cells as a sheet form retaining intrinsic cell adhesion proteins, which promotes its transplantation efficiency to the target tissue. We thus hypothesized that MSC sheets would therapeutically reduce kidney disease with high transplantation efficiency. When the chronic glomerulonephritis was induced by two injections of the anti-Thy 1.1 antibody (OX-7) in rats, the therapeutic efficacy of rat bone marrow stem cell (rBMSC) sheet transplantation was evaluated. The rBMSC-sheets were prepared using the temperature-responsive cell-culture surfaces and transplanted as patches onto the surface of two kidneys of each rat at 24 h after the first injection of OX-7. At 4 weeks, retention of the transplanted MSC-sheets was confirmed, and the animals with MSC-sheets showed significant reductions in proteinuria, glomerular staining for extracellular matrix protein, and renal production of TGFß1, PAI-1, collagen I, and fibronectin. The treatment also ameliorated podocyte and renal tubular injury, as evidenced by a reversal in the reductions of WT-1, podocin, and nephrin and by renal overexpression of KIM-1 and NGAL. Furthermore, the treatment enhanced gene expression of regenerative factors, and IL-10, Bcl-2, and HO-1 mRNA levels, but reduced TSP-1 levels, NF-kB, and NAPDH oxidase production in the kidney. These results strongly support our hypothesis that MSC-sheets facilitated MSC transplantation and function, and effectively retarded progressive renal fibrosis via paracrine actions on anti-cellular inflammation, oxidative stress, and apoptosis and promoted regeneration. [ABSTRACT FROM AUTHOR]

Various culture devices have been developed as fundamental technologies for facilitating bioengineering studies. Culture devices are designed to prepare specific culture environments. Thus, both macrostructures and surface micromorphology should be considered in the device design. Although fabricating devices with elaborate designs incurs high production costs, disposable materials are typically used for culture devices. However, some metallic materials are strong, stable, and biocompatible. Bioengineers have not applied these materials to culture devices because of the difficulty of processing. An emerging technology using three-dimensional (3D) printing has been developed, which can produce complex designs using metal. We demonstrate the applicability and potential of metal 3D printing for fabricating culture devices toward the development of the bioengineering discipline. As a specific example, we fabricated metallic culture devices where the environment of cultured tissues can be improved. One of the biggest factors determining the culture environment is active media supply. To attain active media supply to the tissue, devices having culture surfaces with mesh structures having holes far larger than cells were proposed. Cell sheets were cultured as tissue models, realizing tissue culture with such structures. The cultured tissue showed increased metabolism, indicating enhanced media supply owing to mesh surfaces. The biocompatibility of the 3D printed metal device was confirmed by viability assays on cultured cells, and reusability of the device was confirmed by mechanical and biochemical evaluations. We believe this study serves as a reference for using metallic 3D printing as an option for fabricating culture devices, which will promote bioengineering research. [ABSTRACT FROM AUTHOR]

Background: Stem cell sheets provide a scaffold-free option for the promotion of graft healing after anterior cruciate ligament reconstruction (ACLR). However, cell viability, stability, and potential uncontrolled actions create challenges for clinical translation. The decellularization of cell sheets may overcome these problems as studies have shown that the natural extracellular matrix of stem cells is bioactive and can promote tissue repair. Hypothesis: The decellularized tendon-derived stem cell (dTDSC) sheet can promote graft healing after ACLR. Study Design: Controlled laboratory study. Methods: An optimized decellularization protocol was developed to decellularize the TDSC sheets. A total of 64 Sprague-Dawley rats underwent ACLR with or without the dTDSC sheet wrapping the tendon graft (n = 32/group). At 2 and 6 weeks after surgery, graft healing was assessed by micro–computed tomography, histology, and biomechanical testing. The accumulation of iNOS+ and CD206+ cells and the expression of metalloproteinase 1 (MMP-1), MMP-13, and tissue inhibitor of metalloprotease 1 (TIMP-1) were assessed by immunohistochemistry. Results: The decellularization was successful, with the removal of 98.4% nucleic acid while preserving the collagenous proteins and bioactive factors. The expression of bone morphogenetic protein 2 (BMP-2) and VEGF in the dTDSC sheet was comparable with the TDSC sheet (P >.05). Micro–computed tomography showed significantly more tunnel bone formation in the dTDSC sheet group. The dTDSC sheet group demonstrated better graft osteointegration and higher integrity of graft midsubstance with significantly higher ultimate failure load (16.58 ± 7.24 vs 8.93 ± 2.45 N; P =.002) and stiffness (11.97 ± 5.21 vs 6.73 ± 2.20 N/mm; P =.027). Significantly fewer iNOS+ cells but more CD206+ cells, as well as lower MMP-1 and MMP-13 but higher TIMP-1 expression, were detected at the tendon-bone interface and graft midsubstance in the dTDSC sheet group. Conclusion: An optimized decellularization protocol for producing bioactive dTDSC sheets was developed. Wrapping tendon graft with a dTDSC sheet promoted graft healing after ACLR, likely via enhancing bone formation and angiogenesis by BMP-2 and VEGF, modulating macrophage polarization and MMP/TIMP expression, and physically protecting the tendon graft. Clinical Relevance: dTDSC sheets alleviate the quality control and safety concerns of cell transplantation and can be used as a cell-free alternative for the promotion of graft healing in ACLR. [ABSTRACT FROM AUTHOR]

Over-dependence on existing synthetic scaffolds and insufficient osteoinductive and vasculogenic growth factors have limited the development of bone regeneration. The study aimed to assess the feasibility of using marrow-derived mesenchymal stem cells (BMSCs) cell sheets co-expressing bone morphogenetic proteins 2 (BMP2) and vascular endothelial growth factor (VEGF) for repairing critical-sized calvarial defects. BMSCs cell sheets were genetically engineered to express BMP2/VEGF alone or together. Alterations in osteogenic markers were examined by quantitative real-time PCR (qRT-PCR) and western blotting. A critical-sized calvarial bone defect model was used to investigate the osteogenesis effects of BMP2/VEGF cell sheets alone or in combination. The efficacy was assessed with micro-computed tomography (micro-CT) and histology. In vitro, the expression of BMP2 and VEGF through lentiviral transduction was confirmed by qRT-PCR and western blotting against BMP2 and VEGF. Lentiviral delivery of BMP2 and VEGF resulted in the upregulation of osteogenic markers. In vivo, in a critical-sized calvarial bone defect model, 3D-reconstructed micro-CT images revealed that treatment of the calvarial defects with the BMP2/VEGF cell sheet resulted in significantly greater amounts of newly formed bone at 8 weeks after surgery than treatment with cell sheets with single gene transduction or vehicle controls. The results were confirmed by histological assessment by H&E staining and Masson staining. This study demonstrates that BMP2/VEGF co-expressing BMSCs sheets promote bone regeneration in critical-sized calvarial bone defects. The BMP2/VEGF cell sheets provide a functional bioactive scaffold for critical-size bone reconstruction. [ABSTRACT FROM AUTHOR]

Aim: To compare the efficacy of adipocyte‐derived dedifferentiated fat (DFAT) cell and adipose‐derived stromal cell (ADSC) sheets for regenerative treatment of intra‐bony periodontal defects. Materials and Methods: DFAT cells were obtained using the ceiling culture method and were compared with ADSCs using Cell Counting Kit‐8, colony formation assay, surface antigen identification, and multilineage differentiation assays. DFAT and ADSC sheets were prepared in a cell sheet culture medium. The biological characteristics of DFAT cell and ADSC sheets were compared using haematoxylin and eosin staining, quantitative reverse transcription polymerase chain reaction, and immunofluorescence staining. Micro‐computed tomography and histological staining were used to compare the effects of the two cell sheets on the repair of periodontal intra‐bony defects in rats. Results: DFAT cells and ADSCs demonstrated mesenchymal stem cell characteristics. Both cell types were CD29‐, CD90‐, and CD146‐positive and CD31‐, CD34‐, and CD45‐negative. DFAT cells and ADSCs exhibited similar osteogenic and adipogenic differentiation capabilities and colony formation ability. DFAT cells displayed stronger proliferation capabilities compared with ADSCs. Compared with the ADSC sheets, DFAT cell sheets exhibited a higher expression of periodontal‐related genes and proteins and greater ability to regenerate periodontal tissue. Conclusions: Our findings suggest that DFAT cell sheets are an ideal seed cell source and form of cell delivery for periodontal intra‐bony defects. [ABSTRACT FROM AUTHOR]

Introduction: Lung transplantation is the only effective treatment option for many patients with irreversible pulmonary injury, and the demand for lung transplantation is increasing worldwide and expected to continue to outstrip the number of available donors. Regenerative therapy with alveolar epithelial cells (AECs) holds promise as an alternative option to organ transplantation. AECs are usually co-cultured with mouse-derived 3T3 feeder cells, but the use of xenogeneic tissues for regenerative therapy raises safety concerns. Fabrication of AEC sheets under feeder-free conditions would avoid these safety issues. We describe a novel feeder-free method of fabricating AEC sheets that may be suitable for pulmonary regenerative therapy. Methods: Lung tissues excised from male outbred rats or transgenic rats expressing green fluorescent protein (GFP) were finely minced and dissociated with elastase. The isolated AECs were cultured under four different feeder-free conditions according to whether a rho kinase (ROCK) inhibitor was included in the low-calcium medium (LCM) and whether the tissue culture dish was coated with recombinant laminin-511 E8 fragment (rLN511E8). The expanded cells were cultured on temperature-responsive dishes and subsequently harvested as AEC sheets. Engraftment of GFP-AEC sheets after their transplantation onto a partially resected region of the left lung was assessed in athymic rats. Results: AECs proliferated and reached confluence when cultured in LCM containing a ROCK inhibitor on tissue culture dishes coated with rLN511E8. When both the ROCK inhibitor and rLN511E8-coated culture dish were used, the number of AECs obtained after 7 days of culture was significantly higher than that in the other three groups. Immunohistochemical analyses revealed that aquaporin-5, surfactant protein (SP)-A, SP-C, SP-D and Axin-2 were expressed by the cultured AECs. AEC sheets were harvested successfully from temperature-responsive culture dishes (by lowering the temperature) when the expanded AECs were cultured for 7 days in LCM + ROCK inhibitor and then for 3 days in LCM + ROCK inhibitor supplemented with 200 mg/L calcium chloride. The AEC sheets were firmly engrafted 7 days after transplantation onto the lung defect and expressed AEC marker proteins. Conclusions: AEC sheets fabricated under feeder-free conditions retained the features of AECs after transplantation onto the lung in vivo. Further improvement of this technique may allow the bioengineering of alveolar-like tissue for use in pulmonary regenerative therapy.

• mNF-CSs exhibit excellent endogenous and exogenous ROS scavenging capabilities. • mNF-CSs preserve cell stemness during culturing. • mNF-CSs have a richer extracellular matrix and stable structure than pure CSs. • mNF-CSs enhance in situ survival and tissue repair for periodontal regeneration. Mesenchymal stem cell (MSC)-based cell sheet engineering holds great promise for periodontal tissue engineering and restoring damaged tissues. However, achieving optimal regenerative outcomes remains a challenge. This study introduces a novel approach that integrates melatonin-coated nanofiber fragments (mNFs) into dental follicle stem cell sheets (mNF-CSs) to enhance their regenerative potential. The mNF-CSs were engineered using electrospun poly-L-lactic acid (PLLA) nanofiber sheets fragmented into mNFs and coated with melatonin, a potent antioxidant and osteogenic agent. The mNF-CSs exhibited a homogenous morphology with sustained melatonin release over 21 days, providing a prolonged antioxidative effect critical for tissue regeneration. In vitro experiments demonstrated that mNF-CSs significantly reduced intracellular reactive oxygen species (ROS) levels and upregulated antioxidative proteins such as SOD1 and SOD2, resulting in improved cell viability, maintenance of stemness, and enhanced osteogenic differentiation potential of dental follicle stem cells (DFCs). In vivo studies using both a nude mouse and a rat periodontal defect model demonstrated that mNF-CSs promoted alveolar bone repair and periodontal tissue regeneration, with enhanced retention of MSCs at the defect site and increased expression of periodontal tissue-related markers. Transcriptome analysis revealed the upregulation of genes associated with biomineralization, odontogenesis, and autophagy pathways in mNF-CSs, suggesting their ability to modulate crucial cellular processes for tissue regeneration. Overall, mNF-CSs offer a promising strategy for enhancing periodontal tissue engineering applications, providing a platform for improving bone grafts and regenerative medicine strategies in the context of periodontal diseases. [ABSTRACT FROM AUTHOR]

Abstract Management of avulsed teeth after replantation often leads to an unfavorable outcome. Damage to the thin and vulnerable periodontal ligament is the key reason for failure. Cell- or stem cell-based regenerative medicine has emerged in the past two decades as a promising clinical treatment modality to improve treatment outcomes. This concept has also been tested for the management of avulsed teeth in animal models. This review focuses on the discussion of limitation of current management protocols for avulsed teeth, cell-based therapy for periodontal ligament (PDL) regeneration in small and large animals, the challenges of de novo regeneration of PDL on denuded root in the edentulous region using a mini-swine model, and establishing a prospective new clinical protocol to manage avulsed teeth based on the current progress of cell-based PDL regeneration studies.

Introduction: We developed a new treatment method that combines tympanoplasty with transplantation of autologous cultured nasal mucosal epithelial cell sheets to regenerate the mucosa of patients with adhesive otitis media, which has been difficult to treat effectively. We verified whether this procedure could be performed safely and measured its therapeutic efficacy. Methods: Autologous nasal mucosal epithelial cell sheets were manufactured at a good manufacturing practice-compliant cell processing facility using autologous nasal mucosal tissue. We performed tympanoplasty and transplanted the cell sheets into the middle ear cavity in six patients with adhesive otitis media. Results: The manufactured autologous cultured epithelial cell sheets met the predetermined quality standards and were successfully transplanted safely in all cases. Computed tomography findings after cell sheet transplantation showed that aeration in the tympanic cavity was maintained or restored in five of the six patients (83.3%). Four of the six (66.7%) patients had postoperative air-bone gap within 20 dB, which is considered a postoperative success in tympanoplasty for chronic middle ear disease. Conclusions: The results of this clinical study suggest that tympanoplasty with cell sheet transplantation can be used to treat adhesive otitis media by reliably preventing re-adhesion of the tympanic membrane.

Introduction: Gene therapy have recently attracted much attention as a curative therapeutic option for inherited single gene disorders such as hemophilia. Hemophilia is a hereditary bleeding disorder caused by the deficiency of clotting activity of factor VIII (FVIII) or factor IX (FIX), and gene therapy for hemophilia using viral vector have been vigorously investigated worldwide. Toward further advancement of gene therapy for hemophilia, we have previously developed and validated the efficacy of novel two types of gene transfer technologies using a mouse model of hemophilia A. Here we investigated the efficacy and safety of the technologies in canine model. Especially, validations of technical procedures of the gene transfers for dogs were focused. Methods: Green fluorescence protein (GFP) gene were transduced into normal beagle dogs by ex vivo and in vivo gene transfer techniques. For ex vivo gene transfer, blood outgrowth endothelial cells (BOECs) derived from peripheral blood of normal dogs were transduced with GFP gene using lentivirus vector, propagated, fabricated as cell sheets, then implanted onto the omentum of the same dogs. For in vivo gene transfer, normal dogs were subjected to GFP gene transduction with non-viral piggyBac vector by liver-targeted hydrodynamic injections. Results: No major adverse events were observed during the gene transfers in both gene transfer systems. As for ex vivo gene transfer, histological findings from the omental biopsy performed 4 weeks after implantation revealed the tube formation by implanted GFP-positive BOECs in the sub-adipose tissue layer without any inflammatory findings, and the detected GFP signals were maintained over 6 months. Regarding in vivo gene transfer, analyses of liver biopsy samples revealed more than 90% of liver cells were positive for GFP signals in the injected liver lobes 1 week after gene transfers, then the signals gradually declined overtime. Conclusions: Two types of gene transfer techniques were successfully applied to a canine model, and the transduced gene expressions persisted for a long term. Toward clinical application for hemophilia patients, practical assessments of therapeutic efficacy of these techniques will need to be performed using a dog model of hemophilia and FVIII (or FIX) gene.

A variety of poly(N-isopropylacrylamide) (PIPAAm)-grafted surfaces have been reported for temperature-controlled cell adhesion/detachment. However, the surfaces reported to date need further improvement to achieve good outcomes for both cell adhesion and detachment, which are inherently contradictory behaviors. This study investigated the effects of terminal cationization and length of grafted PIPAAm chains on temperature-dependent cell behavior. PIPAAm brushes with three chain lengths were constructed on glass coverslips via surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization. Terminal substitution of the grafted PIPAAm chains with either monocationic trimethylammonium or nonionic isopropyl moieties was performed through the reduction of terminal RAFT-related groups and subsequent thiol-ene reaction with the corresponding acrylamide derivatives. Although the thermoresponsive properties of the PIPAAm brush surfaces were scarcely affected by the terminal functional moiety, the zeta potentials of the cationized PIPAAm surfaces were higher than those of the nonionized ones, both below and above the phase transition temperature of PIPAAm (30°C). When bovine endothelial cells were cultured on each surface at 37°C, the number of adherent cells decreased with longer PIPAAm. Notably, cell adhesion on the cationized PIPAAm surfaces was higher than that on the nonionized surfaces. This terminal effect on cell adhesion gradually weakened with increasing PIPAAm length. In particular, long-chain PIPAAm brushes virtually showed cell repellency even at 37°C, regardless of the termini. Interestingly, moderately long-chain PIPAAm brushes promoted cell detachment at 20°C, with negligible terminal electrostatic interruption. Consequently, both cell adhesion and detachment were successfully improved by choosing an appropriate PIPAAm length with terminal cationization.

Today, stem cell therapy has been shown to be a remarkable progress and an important application in the regeneration of defective tissues and organs. To deliver stem cells to the injured area, several methods have been proposed such as an intravenous infusion, direct damaged tissue injection, or stem cell sheet transplantation. In this study, we aimed to fabricate a stem cell sheet by culturing human umbilical cord mesenchymal stem cells (hUC-MSCs) on a Col-T scaffold to recover the structure and function of damaged tissues. The results showed that cells reach confluent on the scaffold surface 18 h after seeding. These stem cells were able to survive and proliferate on Col-T scaffold. The average tensile strength of the stem cell sheet was 2.65 MPa. The sheet reached the sterile standards when tested for total bacteria, Candida albicans, Pseudomonas aeruginosa, and Staphylococcus aureus according to Circular number 06/2011/TT-BYT of Vietnam Ministry of Health. In addition, the stem cell sheet was non-toxic when evaluated for exposure toxicity and fluid toxicity according to iSO-10993. Importantly, 5 days after culturing on the Col-T scaffold, the seeded hUC-MSCs were still possessed all properties of MSC such as spindle-shaped, adhesive, could differentiate into mesoderm-derived cells, showed to be CD90, CD105, CD73 positive and CD45, CD34, CD11b, CD19, HLA-DR negative. In summary, our study was successful in creating a stem cell sheet from hUC-MSCs and Col-T scaffold for subsequent in vivo transplantation in the future.

The heterogeneous nature of osteochondral tissue requires the construction of implant with biomimetic gradients. Electrospun fibrous meshes with different designs provide the feasibility in arranging such a kind of gradient structure via layer-by-layer stacking. In this study, a kind of triphasic implant was constructed by layering pre-differentiated cell sheets, which were hold by electrospun poly(L-lactide)/gelatin (PLLA/Gel) fibrous meshes containing hyaluronic acid and chondroitin sulfate for the cartilage layer or hydroxyapatite for the bone layer. As for the calcified interlayer, the bone marrow mesenchymal stromal cells (BMSCs) seeded on PLLA/Gel fibrous mesh was pre-differentiated with a mixed osteoinductive/chondroinductive (1:1) medium. With this gradient construct being implanted in rabbit knee osteochondral defect, it was found that both the cartilage and subchondral bone were regenerated effectively with reproduced tidal line structure. The importance of implants with biomimetic gradients for osteochondral defect repair was confirmed, and cell sheets on electrospun fibrous meshes were flexible for gradient structure construction via the layer-by-layer stacking technology. Composite fibrous meshes with tissue-specific components are electrospun. Confluent BMSCs on fibrous meshes are chondrogenically or osteogenically induced. BMSCs hypertrophy is induced with the mixture of chondroinductive and osteoinductive medium. The pre-differentiated cell/mesh complexes are stacked layer-by-layer to form gradient construct. The gradient construct efficiently promotes osteochondral regeneration in rabbit joint. [ABSTRACT FROM AUTHOR]

Aimed to rapidly form high-quality cell sheets, poly(N-isopropylacrylamide-co-acrylic acid) (PNIPA-AA) was synthesized by free radical polymerization of N-isopropylacrylamide (NIPA) and acrylic acid (AA). The chemical structure of the synthesized PNIPA-AA was characterized by nuclear magnetic resonance spectroscopy (NMR) and Fourier infrared spectroscopy (FT-IR), and temperature sensitivity was detected by variable temperature infrared spectroscopy and ultra violet visible spectrophotometry. PNIPA-AA was subsequently blended with polycaprolactone (PCL) for electrospinning thermosensitive fibrous substrate of PNIPA-AA/PCL. Morphology of the electro spun fibrous PNIPA-AA/PCL substrate was observed by scanning electron microscopy (SEM) and its temperature sensitivity was confirmed through water contact angle measurement. Using mouse fibroblasts C3H/10T1/2 as model cells, effects of the fibrous PNIPA-AA/PCL substrate on the formation and detachment of cell sheets were examined. Results showed that the lower critical solution temperature (LCST) of PNIPA-AA was 33.6 ℃. PNIPA-AA possessed better electrospinnability. Electro spun fibrous substrate of the PNIPAAA/ PCL showed higher hydrophobicity at high temperature (37 ℃) and faster water infiltration rate at low temperature (20 ℃). The fibrous PNIPA-AA/PCL substrate promoted cell proliferation and extracellular matrix (ECM) secretion in C3H/10T1/2. Moreover, it took merely 10 minutes for the formed cell sheets to be completely detached by cooling down the temperature to lower than LCST, e.g., 20 ℃. And the integrity and function of the harvested cell sheets remained intact. [ABSTRACT FROM AUTHOR]

The challenges associated with animal testing in pharmaceutical development have driven the search for alternative in vitro models that mimic human tissues more accurately. In this study, we present a simple and cost-effective method for generating 3D cell sheets and spheroids using curvature-controlled paraffin wax films, which are easily accessible laboratory materials that eliminate the need for extracellular matrix (ECM) components or thermo-responsive polymers. By adjusting the curvature of the paraffin wax film, we successfully generated human periodontal ligament fibroblast (HPdLF) cell sheets and bone marrow-derived mesenchymal stem cell (hBMSC) spheroids. Key parameters, such as cell density, substrate curvature, and incubation time, were identified as critical factors for optimizing the formation of these 3D structures. In addition, the use of quantum dots (QDs) for cell tracking enabled long-term visualization and distinction between different cell types within complex tissue-like structures. We further demonstrated that wrapping the hBMSC spheroids with HPdLF cell sheets partially replicated the connective tissue structure of the periodontal ligament surrounding the tooth root. This highlights the potential of this platform for the construction of more sophisticated tissue-mimicking assemblies. In conclusion, curvature-controlled paraffin wax films provide a versatile and practical approach for 3D cell cultures. This simplifies the generation of both cell sheets and spheroids, offering a promising tool for tissue engineering and regenerative medicine applications, where precise cell-to-cell interactions are essential., (© 2024. The Author(s).)

Owing to the moist and curved interfaces of skin wounds, enhancing the adhesiveness while maintaining delivery efficacy of biomolecules has drawn significant attention in advanced wound dressings. Despite tremendous trials to load biomolecules with sound adhesiveness, the complicated fabricating processes and abnormal allergic responses that are attributed to chemical moiety-based adhesives remain as major problems. To this end, in this study a one-step fabrication process is developed to manufacture microstructures with both a therapeutic (cylindrical structure for embossed structure human adipose-derived stem cell sheet, ESS) and an adhesive part (octopi-inspired structure of adhesive, OIA), which ESOIA is called. OIA showed the highest adhesion strength in both dry (1.48 N cm -2 ) and wet pig skin conditions (0.81 N cm -2 ), maintaining the adhesive properties after repeated attach-detach trials. ESS from the therapeutic part of ESOIA also showed an enhanced angiogenic effect compared with the ones that are normally cultured in vitro. ESS also showed improved in vivo wound healing outcomes following enhanced cell engraftment compared to the cell injection group by means of intact cell-extracellular matrix interactions., (© 2024 Wiley‐VCH GmbH.)

Stem cell-based therapy has been used to treat ischaemic heart diseases for two decades. However, optimal cell types and transplantation methods remain unclear. This study evaluated the therapeutic effects of human umbilical cord mesenchymal stem cell (hUCMSC) sheet on myocardial infarction (MI). Methods: hUCMSCs expressing luciferase were generated by lentiviral transduction for in vivo bio-luminescent imaging tracking of cells. We applied a temperature-responsive cell culture surface-based method to form the hUCMSC sheet. Cell retention was evaluated using an in vivo bio-luminescent imaging tracking system. Unbiased transcriptional profiling of infarcted hearts and further immunohistochemical assessment of monocyte and macrophage subtypes were used to determine the mechanisms underlying the therapeutic effects of the hUCMSC sheet. Echocardiography and pathological analyses of heart sections were performed to evaluate cardiac function, angiogenesis and left ventricular remodelling. Results: When transplanted to the infarcted mouse hearts, hUCMSC sheet significantly improved the retention and survival compared with cell suspension. At the early stage of MI, hUCMSC sheet modulated inflammation by decreasing Mcp1-positive monocytes and CD68-positive macrophages and increasing Cx3cr1-positive non-classical macrophages, preserving the cardiomyocytes from acute injury. Moreover, the extracellular matrix produced by hUCMSC sheet then served as bioactive scaffold for the host cells to graft and generate new epicardial tissue, providing mechanical support and routes for revascularsation. These effects of hUCMSC sheet treatment significantly improved the cardiac function at days 7 and 28 post-MI. Conclusions: hUCMSC sheet formation dramatically improved the biological functions of hUCMSCs, mitigating adverse post-MI remodelling by modulating the inflammatory response and providing bioactive scaffold upon transplantation into the heart. Translational perspective: Due to its excellent availability as well as superior local cellular retention and survival, allogenic transplantation of hUCMSC sheets can more effectively acquire the biological functions of hUCMSCs, such as modulating inflammation and enhancing angiogenesis. Moreover, the hUCMSC sheet method allows the transfer of an intact extracellular matrix without introducing exogenous or synthetic biomaterial, further improving its clinical applicability.

Background: Adipose-derived stem cell (ASC) has been considered as a desirable source for cell therapy. In contrast to combining scaffold materials with cells, ASCs can be fabricated into scaffold-free three-dimensional (3D) constructs to promote regeneration at tissue level. However, previous reports have found decreased expression of vascular endothelial growth factor (VEGF) in ASC sheets. In this study, we aimed to integrate ASC spheroids into ASC sheets to enhance the angiogenic capability of cell sheets. Methods: ASCs were seeded in agarose microwells to generate uniform cell spheroids with adjustable size, while extracellular matrix deposition could be stimulated by ascorbic acid 2-phosphate to form ASC sheets. RNA sequencing was performed to identify the transcriptomic profiles of ASC spheroids and sheets relative to monolayer ASCs. By transferring ASC spheroids onto ASC sheets, the spheroid sheet composites could be successfully fabricated after a short-term co-culture, and their angiogenic potential was evaluated in vitro and in ovo. Results: RNA sequencing analysis revealed that upregulation of angiogenesis-related genes was found only in ASC spheroids. The stimulating effect of spheroid formation on ASCs toward endothelial lineage was demonstrated by enhanced CD31 expression, which maintained after ASC spheroids were seeded on cell sheets. Relative to ASC sheets, enhanced expression of VEGF and hepatocyte growth factor was also noted in ASC spheroid sheets, and conditioned medium of ASC spheroid sheets significantly enhanced tube formation of endothelial cells in vitro. Moreover, chick embryo chorioallantoic membrane assay showed a significantly higher capillary density with more branch points after applying ASC spheroid sheets, and immunohistochemistry also revealed a significantly higher ratio of CD31-positive area. Conclusion: In the spheroid sheet construct, ASC spheroids can augment the pro-angiogenesis capability of ASC sheets without the use of exogenous biomaterial or genetic manipulation. The strategy of this composite system holds promise as an advance in 3D culture technique of ASCs for future application in angiogenesis and regeneration therapies. [ABSTRACT FROM AUTHOR]

Background: Human umbilical cord mesenchymal stem cells (hUC-MSCs) have been widely used due to their multipotency, a broad range of sources, painless collection, and compliance with standard amplification. Cell sheet technology is a tissue engineering methodology requiring scaffolds free, and it provides an effective method for cell transplantation. To improve the therapeutic efficacy, we combined hUC-MSCs with cell sheet technology to evaluate the safety and efficacy of hUC-MSC sheets in preclinical studies using appropriate animal models. Methods: hUC-MSC sheets were fabricated by hUC-MSCs from a cell bank established by a standard operation process and quality control. Cytokine secretion, immunoregulation, and angiopoiesis were evaluated in vitro. Oncogenicity and cell diffusion assays of hUC-MSC sheets were conducted to verify the safety of hUC-MSCs sheet transplantation in mice. To provide more meaningful animal experimental data for clinical trials, porcine myocardial infarction (MI) models were established by constriction of the left circumflex, and hUC-MSC sheets were transplanted onto the ischemic area of the heart tissue. Cardiac function was evaluated and compared between the experimental and MI groups. Results: The in vitro results showed that hUC-MSC sheets could secrete multiple cellular factors, including VEGF, HGF, IL-6, and IL-8. Peripheral blood mononuclear cells had a lower proliferation rate and lower TNF-α secretion when co-cultured with hUC-MSC sheets. TH1 cells had a smaller proportion after activation. In vivo safety results showed that the hUC-MSCs sheet had no oncogenicity and was mainly distributed on the surface of the ischemic myocardial tissue. Echocardiography showed that hUC-MSC sheets effectively improved the left ventricular ejection fraction (LVEF), and the LVEF significantly changed (42.25 ± 1.23% vs. 66.9 ± 1.10%) in the hUC-MSC transplantation group compared with the MI group (42.52 ± 0.65% vs. 39.55 ± 1.97%) at 9 weeks. The infarct ratio of the hUC-MSCs sheet transplantation groups was also significantly reduced (14.2 ± 4.53% vs. 4.00 ± 2.00%) compared with that of the MI group. Conclusion: Allogeneic source and cell bank established by the standard operation process and quality control make hUC-MSCs sheet possible to treat MI by off-the-shelf drug with universal quality instead of individualized medical technology. [ABSTRACT FROM AUTHOR]

Biodegradable nonwoven fabrics that can be used to extract and culture adipose‐derived stem cells (ADSCs) from adipose tissue slices without enzyme digestion are developed. The fabrics are made of fibers consisting of biodegradable poly(lactic‐co‐glycolic acid) (PLGA) and hydroxyapatite (HAp), which can be strongly oriented by adjusting the fiber deposition conditions. ADSCs are extracted from adipose tissue slices and cultured, and thick cell sheets are produced by placing nonwoven fabric on the adipose tissue slices or sandwiching the adipose tissue slices between two layers of fabric. Nonwoven fabrics with large anisotropy extract and culture ADSCs from adipose tissue slices more quickly than those with small anisotropy. In addition, cell sheets are produced more rapidly by cultivating cells on a culture vessel with low‐cell adhesion. Finally, it confirms that ADSCs extracted and cultured from adipose tissue slices using nonwoven fabrics maintain the characteristics of mesenchymal stem cells. [ABSTRACT FROM AUTHOR]

Abstract In recent years, mesenchymal stem cells (MSCs) have been used to improve cardiac function and attenuate adverse ventricular remodeling of the ischemic myocardium through paracrine effects and immunoregulation functions. In combination with cell sheet technology, MSCs could be more easily transplanted to the ischemic area. The long-term retention of MSCs in the affected area was realized and significantly improved the curative effect. In this review, we summarized the research and the applications of MSC sheets to the treatment of ischemic heart tissue. At present, many types of MSCs have been considered as multipotent cells in the treatment of heart failure, such as bone marrow-derived mesenchymal stem cells (BM-MSCs), adipose-derived mesenchymal stem cells (AD-MSCs), umbilical cord-derived mesenchymal stem cells (UC-MSCs), and skeletal myoblasts (SMs). Since UC-MSCs have few human leukocyte antigen-II and major histocompatibility complex class I molecules, and are easy to isolate and culture, UC-MSC sheets have been proposed as a candidate for clinical applications to ischemic heart disease.