Search

In various research areas ranging from materials science to life sciences it becomes more and more important to be able to analyze the structure as well as the chemical composition at the nano-scale. For example, the size of electronic components becomes smaller and smaller increasing the need of having techniques to precisely follow dopant distributions with high spatial resolution. In the field of renewable energy devices, e.g. solar cells and batteries, the performance typically depends on the chosen material composition and distribution. Linking the underlying structure and composition at the nano-scale to the device’s performance is therefore of utmost importance [1,2]. Similar needs for having high spatial resolution and high-sensitivity chemical information can be found in life sciences [3]. In nano-toxicology for instance, it is important to be able to reveal sub-cellular structures and simultaneously determine their chemical, elemental or isotopic composition in order to better understand relevant processes [4]. In most of the afore mentioned studies a number of different instruments is nowadays used to perform these investigations using correlative approaches. Being able to do such correlative studies in one single instrument is definitely beneficial for reducing the analysis time, speeding up the throughput as well as for facilitating the precise localization of the region of interests on the investigated samples. Therefore, we developed a multimodal nano-analytical platform allowing in-situ analysis of a same sample using different information channels. The instrument is equipped with the ultra-high resolution Gas Field Ion Source (GFIS) technology [5] allowing the sample to be irradiated with very finely focused He+ and Ne+ primary ion beams. This allows sub-nanometer spatial resolution when working with the secondary electron (SE) detection mode as imaging mode. Furthermore, the instrument incorporates a compact secondary ion mass spectrometer (SIMS) for chemical analysis of samples with excellent sensitivity and high dynamic range. The mass spectrometer is based on a double focusing magnetic sector design and allows sub-20 nm chemical imaging resolution [6-8]. Moreover, the SIMS system incorporates a new kind of detector for parallel mass detection providing a full mass spectrum for each analyzed pixel. The third newly developed detection mode available within the instrument is a position sensitive transmission detector located at the backside of the sample in order to detect the transmitted He beam. This scanning transmission helium ion microscopy (STHIM) mode provides further in-situ structural/compositional data with tomographic capabilities. In order to optimize the analysis of biological samples, one further key feature of the instrument is a 5-axis cryo-stage along with cryo-capabilities for sample transfers. This cryo-capability allows biological samples to be analyzed in a frozen-hydrated state, thus avoiding artefacts caused by classical sample preparation (e.g. chemical fixation) used for HV or UHV imaging of biological specimens at room temperature. Moreover, the cryo-mode can be beneficial for analyzing beam sensitive samples in materials science such as OLEDs and polymers. In this work we will present the npSCOPE concept and the instrument’s overall setup, report on the performance of the different detection modes and discuss the correlative microscopy capabilities. We will present results from case studies in different fields, with a particular focus on nanoparticles (see Figure 1) [9].

Lactococcus lactis , a Gram + lactic acid-producing bacterium used for the manufacture of several fermented dairy products, is subject to infection by diverse virulent tailed phages, leading to industrial fermentation failures. This constant viral risk has led to a sustained interest in the study of their biology, diversity, and evolution. Lactococcal phages now constitute a wide ensemble of at least 10 distinct genotypes within the Caudovirales order, many of them belonging to the Siphoviridae family. Lactococcal siphophage 1358, currently the only member of its group, displays a noticeably high genomic similarity to some Listeria phages as well as a host range limited to a few L. lactis strains. These genomic and functional characteristics stimulated our interest in this phage. Here, we report the cryo-electron microscopy structure of the complete 1358 virion. Phage 1358 exhibits noteworthy features, such as a capsid with dextro handedness and protruding decorations on its capsid and tail. Observations of the baseplate of virion particles revealed at least two conformations, a closed and an open, activated form. Functional assays uncovered that the adsorption of phage 1358 to its host is Ca 2+ independent, but this cation is necessary to complete its lytic cycle. Taken together, our results provide the complete structural picture of a unique lactococcal phage and expand our knowledge on the complex baseplate of phages of the Siphoviridae family. IMPORTANCE Phages of Lactococcus lactis are investigated mainly because they are sources of milk fermentation failures in the dairy industry. Despite the availability of several antiphage measures, new phages keep emerging in this ecosystem. In this study, we provide the cryo-electron microscopy reconstruction of a unique lactococcal phage that possesses genomic similarity to particular Listeria phages and has a host range restricted to only a minority of L. lactis strains. The capsid of phage 1358 displays the almost unique characteristic of being dextro handed. Its capsid and tail exhibit decorations that we assigned to nonspecific sugar binding modules. We observed the baseplate of 1358 in two conformations, a closed and an open form. We also found that the adsorption to its host, but not infection, is Ca 2+ independent. Overall, this study advances our understanding of the adhesion mechanisms of siphophages.

International audience; The Type VI secretion system (T6SS) is a macromolecular machine that mediates bacteria-host or bacteria-bacteria interactions. The T6SS core apparatus assembles from 13 proteins that form two sub-assemblies: a phage-like complex and a trans-envelope complex. The Hcp, VgrG, TssE, and TssB/C subunits are structurally and functionally related to components of the tail of contractile bacteriophages. This phage-like structure is thought to be anchored to the membrane by a trans-envelope complex composed of the TssJ, TssL, and TssM proteins. However, how the two sub-complexes are connected remains unknown. Here we identify TssK, a protein that establishes contacts with the two T6SS sub-complexes through direct interactions with TssL, Hcp, and TssC. TssK is a cytoplasmic protein assembling trimers that display a three-armed shape, as revealed by TEM and SAXS analyses. Fluorescence microscopy experiments further demonstrate the requirement of TssK for sheath assembly. Our results suggest a central role for TssK by linking both complexes during T6SS assembly.

Lipoproteins of temperate phage are a broad family of membrane proteins encoded in the lysogeny module of temperate phages. Expression of the ltp(TP-J34) gene of temperate Streptococcus thermophilus phage TP-J34 interferes with phage infection at the stage of triggering DNA release and injection into the cell. Here, we report the first structure of a superinfection exclusion protein. We have expressed and determined the X-ray structure of Ltp(TP-J34). The soluble domain of Ltp(TP-J34) is composed of a tandem of three-helix helix-turn-helix (HTH) domains exhibiting a highly negatively charged surface. By isolating mutants of lactococcal phage P008wt with reduced sensitivities to Ltp(TP-J34) and by genome sequencing of such mutants we obtained evidence supporting the notion that Ltp(TP-J34) targets the phage's tape measure protein (TMP) and blocks its insertion into the cytoplasmic membrane.

p97 is a key regulator of numerous cellular pathways and associates with ubiquitin-binding adaptors to remodel ubiquitin-modified substrate proteins. How adaptor binding to p97 is coordinated and how adaptors contribute to substrate remodeling is unclear. Here we present the 3D electron cryomicroscopy reconstructions of the major Ufd1-Npl4 adaptor in complex with p97. Our reconstructions show that p97-Ufd1-Npl4 is highly dynamic and that Ufd1-Npl4 assumes distinct positions relative to the p97 ring upon addition of nucleotide. Our results suggest a model for substrate remodeling by p97 and also explains how p97-Ufd1-Npl4 could form other complexes in a hierarchical model of p97-cofactor assembly.

beta-Barrel pore-forming toxins (beta-PFT), a large family of bacterial toxins, are generally secreted as water-soluble monomers and can form oligomeric pores in membranes following proteolytic cleavage and interaction with cell surface receptors. Monalysin has been recently identified as a beta-PFT that contributes to the virulence of Pseudomonas entomophila against Drosophila. It is secreted as a pro-protein that becomes active upon cleavage. Here we report the crystal and cryo-electron microscopy structure of the pro-form of Monalysin as well as the crystal structures of the cleaved form and of an inactive mutant lacking the membrane-spanning region. The overall structure of Monalysin displays an elongated shape, which resembles those of beta-poreforming toxins, such as Aerolysin, but is devoid of a receptorbinding domain. X-ray crystallography, cryo-electron microscopy, and light-scattering studies show that pro-Monalysin forms a stable doughnut-like 18-mer complex composed of two disk-shaped nonamers held together by N-terminal swapping of the pro-peptides. This observation is in contrast with the monomeric pro-form of the other beta-PFTs that are receptor-dependent for membrane interaction. The membrane-spanning region of pro-Monalysin is fully buried in the center of the doughnut, suggesting that upon cleavage of pro-peptides, the two disk-shaped nonamers can, and have to, dissociate to leave the transmembrane segments free to deploy and lead to pore formation. In contrast with other toxins, the delivery of 18 subunits at once, nearby the cell surface, may be used to bypass the requirement of receptor-dependent concentration to reach the threshold for oligomerization into the pore-forming complex.

The Siphoviridae family of bacteriophages is the largest viral family on earth and comprises members infecting both bacteria and archaea. Lactococcal siphophages infect the Gram-positive bacterium Lactococcus lactis, which is widely used for industrial milk fermentation processes (e.g. cheese production). As a result, lactococcal phages have become one of the most thoroughly characterized class of phages from a genomic standpoint. They exhibit amazing and intriguing characteristics. First, each phage has a strict specificity towards a unique or a handful of L. lactis host strains. Second, most lactococcal phages possess a large organelle at their tail tip (termed the baseplate), bearing the receptor binding proteins and mediating host adsorption. The recent accumulation of structural and functional data revealed the modular structure of their building blocks, their different mechanisms of activation and the fine specificity of their receptor binding proteins. These results also illustrated similarities and differences between lactococcal Siphoviridae and Gram-negative infecting Myoviridae.

Many phages employ a large heteropolymeric organelle located at the tip of the tail, termed the baseplate, for host recognition. Contrast electron microscopy (EM) of the lactococcal phage Tuc2009 baseplate and its host-binding subunits, the so-called tripods, allowed us to obtain a low-resolution structural image of this organelle. Structural comparisons between the baseplate of the related phage TP901-1 and that of Tuc2009 demonstrated that they are highly similar, except for the presence of an additional protein in the Tuc2009 baseplate (BppA Tuc2009 ), which is attached to the top of the Tuc2009 tripod structure. Recombinantly produced Tuc2009 or TP901-1 tripods were shown to bind specifically to their particular host cell surfaces and are capable of almost fully and specifically eliminating Tuc2009 or TP901-1 phage adsorption, respectively. In the case of Tuc2009, such adsorption-blocking ability was reduced in tripods that lacked BppA Tuc2009 , indicating that this protein increases the binding specificity and/or affinity of the Tuc2009 tripod to its host receptor.

The unique characteristics of the waxy mycobacterial cell wall raise questions about specific structural features of their bacteriophages. No structure of any mycobacteriophage is available, although ∼3,500 have been described to date. To fill this gap, we embarked in a genomic and structural study of a bacteriophage from Mycobacterium abscessus subsp. bolletii , a member of the Mycobacterium abscessus group. This opportunistic pathogen is responsible for respiratory tract infections in patients with lung disorders, particularly cystic fibrosis. M. abscessus subsp. bolletii was isolated from respiratory tract specimens, and bacteriophages were observed in the cultures. We report here the genome annotation and characterization of the M. abscessus subsp. bolletii prophage Araucaria, as well as the first single-particle electron microscopy reconstruction of the whole virion. Araucaria belongs to Siphoviridae and possesses a 64-kb genome containing 89 open reading frames (ORFs), among which 27 could be annotated with certainty. Although its capsid and connector share close similarity with those of several phages from Gram-negative (Gram − ) or Gram + bacteria, its most distinctive characteristic is the helical tail decorated by radial spikes, possibly host adhesion devices, according to which the phage name was chosen. Its host adsorption device, at the tail tip, assembles features observed in phages binding to protein receptors, such as phage SPP1. All together, these results suggest that Araucaria may infect its mycobacterial host using a mechanism involving adhesion to cell wall saccharides and protein, a feature that remains to be further explored.

Lipoproteins of temperate phage are a broad family of membrane proteins encoded in the lysogeny module of temperate phages. Expression of the ltp(TP-J34) gene of temperate Streptococcus thermophilus phage TP-J34 interferes with phage infection at the stage of triggering DNA release and injection into the cell. Here, we report the first structure of a superinfection exclusion protein. We have expressed and determined the X-ray structure of Ltp(TP-J34). The soluble domain of Ltp(TP-J34) is composed of a tandem of three-helix helix-turn-helix (HTH) domains exhibiting a highly negatively charged surface. By isolating mutants of lactococcal phage P008wt with reduced sensitivities to Ltp(TP-J34) and by genome sequencing of such mutants we obtained evidence supporting the notion that Ltp(TP-J34) targets the phage's tape measure protein (TMP) and blocks its insertion into the cytoplasmic membrane.

Lactococcal phages belong to a large family of Siphoviridae and infect Lactococcus lactis, a gram-positive bacterium used in commercial dairy fermentations. These phages are believed to recognize and bind specifically to pellicle polysaccharides covering the entire bacterium. The phage TP901-1 baseplate, located at the tip of the tail, harbors 18 trimeric receptor binding proteins (RBPs) promoting adhesion to a specific lactococcal strain. Phage TP901-1 adhesion does not require major conformational changes or Ca(2+), which contrasts other lactococcal phages. Here, we produced and characterized llama nanobodies raised against the purified baseplate and the Tal protein of phage TP901-1 as tools to dissect the molecular determinants of phage TP901-1 infection. Using a set of complementary techniques, surface plasmon resonance, EM, and X-ray crystallography in a hybrid approach, we identified binders to the three components of the baseplate, analyzed their affinity for their targets, and determined their epitopes as well as their functional impact on TP901-1 phage infectivity. We determined the X-ray structures of three nanobodies in complex with the RBP. Two of them bind to the saccharide binding site of the RBP and are able to fully neutralize TP901-1 phage infectivity, even after 15 passages. These results provide clear evidence for a practical use of nanobodies in circumventing lactococcal phages viral infection in dairy fermentation.

Lactococcal siphophages from the 936 and P335 groups infect the Gram-positive bacterium Lactococcus lactis using receptor binding proteins (RBPs) attached to their baseplate, a large multiprotein complex at the distal part of the tail. We have previously reported the crystal and electron microscopy (EM) structures of the baseplates of phages p2 (936 group) and TP901-1 (P335 group) as well as the full EM structure of the TP901-1 virion. Here, we report the complete EM structure of siphophage p2, including its capsid, connector complex, tail, and baseplate. Furthermore, we show that the p2 tail is characterized by the presence of protruding decorations, which are related to adhesins and are likely contributed by the major tail protein C-terminal domains. This feature is reminiscent of the tail of Escherichia coli phage λ and Bacillus subtilis phage SPP1 and might point to a common mechanism for establishing initial interactions with their bacterial hosts. Comparative analyses showed that the architecture of the phage p2 baseplate differs largely from that of lactococcal phage TP901-1. We quantified the interaction of its RBP with the saccharidic receptor and determined that specificity is due to lower k off values of the RBP/saccharidic dissociation. Taken together, these results suggest that the infection of L. lactis strains by phage p2 is a multistep process that involves reversible attachment, followed by baseplate activation, specific attachment of the RBPs to the saccharidic receptor, and DNA ejection.

The traditional tools of the structural biologist seeking to understand macromolecules and their complexes are X-ray crystallography and NMR spectroscopy. Single-particle cryo-electron microscopy (cryo-EM) has established itself as a new structural-biology technique over the last 15 years. Spectacular insights into the functioning of macromolecular complexes have been achieved especially from combining cryo-EM with the earlier approaches. The resolution levels achieved improved over the last decade from ∼10 A to sometimes better than ∼4 A, meaning that a de novo structure determination based on single-particle cryo-EM studies alone is now feasible. More challenging is the new perspective that cryo-EM brings: sorting heterogeneous populations of molecules into individual three-dimensional conformers resulting in sequences of related three-dimensional structures, or in short ‘4D cryo-EM’. Thanks to these developments, single-particle cryo-EM has become the technique of choice for shedding light on the functioning of many a complex biological system. The design of the software instrumentation for 4D cryo-EM is crucial. In this chapter we elaborate on organization issues for single-particle cryo-EM software, as exemplified by recent developments in the IMAGIC 4D software system. Keywords: cryo-electron microscopy; IMAGIC 4D

P335 lactococcal phages infect the gram(+) bacterium Lactococcus lactis using a large multiprotein complex located at the distal part of the tail and termed baseplate (BP). The BP harbors the receptor-binding proteins (RBPs), which allow the specific recognition of saccharidic receptors localized on the host cell surface. We report here the electron microscopic structure of the phage TP901-1 wild-type BP as well as those of two mutants bppL (-) and bppU(-), lacking BppL (the RBPs) or both peripheral BP components (BppL and BppU), respectively. We also achieved an electron microscopic reconstruction of a partial BP complex, formed by BppU and BppL. This complex exhibits a tripod shape and is composed of nine BppLs and three BppUs. These structures, combined with light-scattering measurements, led us to propose that the TP901-1 BP harbors six tripods at its periphery, located around the central tube formed by ORF46 (Dit) hexamers, at its proximal end, and a ORF47 (Tal) trimer at its distal extremity. A total of 54 BppLs (18 RBPs) are thus available to mediate host anchoring with a large apparent avidity. TP901-1 BP exhibits an infection-ready conformation and differs strikingly from the lactococcal phage p2 BP, bearing only 6 RBPs, and which needs a conformational change to reach its activated state. The comparison of several Siphoviridae structures uncovers a close organization of their central BP core whereas striking differences occur at the periphery, leading to diverse mechanisms of host recognition.

Siphoviridae is the most abundant viral family on earth which infects bacteria as well as archaea. All known siphophages infecting gram+ Lactococcus lactis possess a baseplate at the tip of their tail involved in host recognition and attachment. Here, we report analysis of the p2 phage baseplate structure by X-ray crystallography and electron microscopy and propose a mechanism for the baseplate activation during attachment to the host cell. This ∼1 MDa, Escherichia coli -expressed baseplate is composed of three protein species, including six trimers of the receptor-binding protein (RBP). RBPs host-recognition domains point upwards, towards the capsid, in agreement with the electron-microscopy map of the free virion. In the presence of Ca 2+ , a cation mandatory for infection, the RBPs rotated 200° downwards, presenting their binding sites to the host, and a channel opens at the bottom of the baseplate for DNA passage. These conformational changes reveal a novel siphophage activation and host-recognition mechanism leading ultimately to DNA ejection.

The X-ray of a permutation is defined as the sequence of antidiagonal sums in the associated permutation matrix. X-rays of permutation are interesting in the context of Discrete Tomography since many types of integral matrices can be written as linear combinations of permutation matrices. This paper is an invitation to the study of X-rays of permutations from a combinatorial point of view. We present connections between these objects and nondecreasing differences of permutations, zero-sum arrays, decomposable permutations, score sequences of tournaments, queens' problems and rooks' problems., Comment: 7 pages