Search

Background: In a previous worldwide survey, the authors showed a drastic reduction in the number of cytological specimens processed during the coronavirus disease 2019 "lockdown" period along with an increase in malignancy rates. To assess the continued impact of the pandemic on cytological practices around the world, they undertook a second follow-up worldwide survey collecting data from the post-lockdown period (2020)., Methods: Participants were asked to provide data regarding their cytopathology activity during the first 12 weeks of their respective national post-lockdown period (2020), which ranged from April 4 to October 31. Differences between the post-lockdown period and the corresponding 2019 period were evaluated, and the authors specifically focused on rates of malignant diagnoses., Results: A total of 29 respondents from 17 countries worldwide joined the survey. Overall, a lower number of cytological specimens (n = 236,352) were processed in comparison with the same period in 2019 (n = 321,466) for a relative reduction of 26.5%. The overall malignancy rate showed a statistically significant increase (12,442 [5.26%] vs 12,882 [4.01%]; P < .001) during the same time period. Similar results were obtained if both malignancy and suspicious for malignancy rates were considered together (15,759 [6.58%] vs 16,011 [4.98%]; P < .001)., Conclusions: The data showed a persistent reduction in the cytological specimen volume during the post-lockdown period (2020). However, the relative increase in the cytological workload in the late part of the post-lockdown is a promising finding of a slow return to normality., (© 2022 American Cancer Society.)

Soft magnetic materials are at the core of electromagnetic devices. Planar transformers are essential pieces of equipment working at high frequency. Usually, their magnetic core is made of various types of ferrites or iron-based alloys. An upcoming alternative might be the replacement the ferrites with FINEMET-type alloys, of nominal composition of Fe 73.5 Si 13.5 B 9 Cu 3 Nb 1 (at. %). FINEMET is a nanocrystalline material exhibiting excellent magnetic properties at high frequencies, a soft magnetic alloy that has been in the focus of interest in the last years thanks to its high saturation magnetization, high permeability, and low core loss. Here, we present and discuss the measured and modelled properties of this material. Owing to the limits of the experimental set-up, an estimate of the total magnetic losses within this magnetic material is made, for values greater than the measurement limits of the magnetic flux density and frequency, with reasonable results for potential applications of FINMET-type alloys and thin films in high frequency planar transformer cores.

A position sensing glove called SmartScan, which creates a 3D virtual model of a real object, is presented. The data from the glove is processed by a volume minimization algorithm to validate the position sensor data. This allows only data from the object's surface to be retained. The data validation algorithm allows the user to progressively improve an image by repeatedly moving their hand over the object. In addition, the user can choose their own balance between feature resolution and invalid data rejection. The SmartScan glove is tested on a foot model and is shown to be robust against motion artifacts, having a mean accuracy of 2.9 mm (compared to a 3D model generated from optical imaging) without calibration.

A soft magnetic MnZn-type ferrite is considered for high frequency applications. First, the morphological, structural, and chemical composition of the material are presented and discussed. Subsequently, by using a vibrating sample magnetometer (VSM), the hysteresis loops are recorded. The open magnetic circuit measurements are corrected by employing demagnetization factors, and by taking into consideration the local magnetic susceptibility. Finally, the hysteresis losses are estimated by the Steinmetz approach, and the results are compared with available commercial information provided by selected MnZn ferrite manufacturers. Such materials are representative in planar inductor and transformer cores due to their typically low losses at high frequency, i.e., up to several MHz, in low-to-medium power applications and providing high efficiency of up to 97%-99%.