Search

Conducting polymers such as poly(3,4-ethylenedioxythiophene) (PEDOT) are widely researched for application in electronic devices. Researcher's look to exploit the ability of these polymers to conduct electrical charge. To induce conductivity, the polymers are doped with counterions; for PEDOT, this is typically done with poly(styrenesulfonate) or tosylate (Tos). The Tos anions inserted within the PEDOT nanostructure stabilize positive defects (holes) on the polymer's conjugated backbone, which, in turn, facilitates electrical conduction. In this study, we use X-ray photoelectron spectroscopy to investigate the Tos doping of PEDOT within the outermost region (< 15 nm) of electrochemically oxidized or reduced PEDOT:Tos nanoscale films. Computation of the predicted density of states from density functional theory studies is also conducted to aid in interpreting the ultraviolet photoelectron spectroscopy spectra. We observe that the doping of PEDOT:Tos is more complex than first thought, likely involving the nonionic triblock copolymer used during PEDOT's oxidative polymerization. This hypothesis is corroborated by time-of -flight secondary-ion mass spectrometry measurements on the outer 2 nm of the oxidized and reduced PEDOT:Tos. The observation of complex and heightened doping near the surface opens opportunities for the deliberate surface engineering of PEDOT:Tos nanofilms in polymer electronic applications such as electrochemical transistors and electrical connections. Refereed/Peer-reviewed

The stable nitroxide radical TEMPO [(2,2,6,6-Tetramethylpiperidin-1-yl)oxyl] has a multitude of applications in fields ranging from energy storage to biomedical applications and many more. However, to date, the processes of incorporating nitroxide radicals into thin-film coatings are laborious and not cost-effective, which hinders their wider use in many applications. In contrast, the authors have recently demonstrated the facile method of plasma polymerization of TEMPO into thin-film coatings that retain the stable nitroxide radicals. In this work, we are using three types of mass spectroscopic methods (plasma-mass spectrometry, time of flight secondary ion mass spectrometry, and high-performance liquid chromatography-mass spectrometry) and electron spin resonance to track the fate of the TEMPO molecule from monomer flask through the plasma and inside the resulting coatings. The results of this study demonstrate that TEMPO is a versatile monomer that can be used across different plasma reactors and reliably retain the stable nitroxide radical in the resulting thin-film coatings if certain process conditions are observed, namely, higher process pressures and lower powers.

In a spray drying operation, a two-fluid nozzle (2FN) with a single channel is commonly used for atomizing the feed solution. However, the less commonly used three-fluid nozzle (3FN) has two separate channels, which allow spray drying of materials in two incompatible solution systems. Although amorphous solid dispersions (ASDs) prepared using a 3FN have been reported to deliver comparable drug dissolution performance relative to those prepared using a 2FN, few studies have systematically examined the effect of 3FN on the physical stability. Therefore, the goal of this work is to systematically study the physical stability of ASDs that are spray-dried using a 3FN compared to those prepared using the traditional 2FN. For the 2FN, a single solution of naproxen and polyvinylpyrrolidone (PVP) was prepared in a mixture of acetone and water at a 1:1 volume ratio because 2FN allows for only one solution inlet. For the 3FN, naproxen and PVP were dissolved individually in acetone and water, respectively, because 3FN allows simultaneous entry of two solutions. Upon storage of the formulated ASDs at different humidity levels (25%, 55% and 75% RH), naproxen crystallized more quickly from the 3FN ASDs as compared with the 2FN ASDs. 3FN ASDs crystallized after 5 days of storage at all conditions, whereas 2FN ASDs did not crystallize even at 55% RH for two months. This relatively higher crystallization tendency of 3FN ASDs was attributed to the inhomogeneity of drug and polymers as identified by the solid-state Nuclear Magnetic Resonance findings, specifically due to poor mixing of water- and acetone-based solutions at the 3FN nozzle. When only acetone was used as a solvent to prepare drug-polymer solutions for 3FN, the formulated ASD was found to be stable for &gt, 3 months of storage (at 75% RH), which suggests that instability of the 3FN ASD was due to the insufficient mixing of water and acetone solutions. This study provides insights into the effects of solvent and nozzle choices on the physical stability of spray-dried ASDs.

(EN)A plasma polymerised polyoxazoline polymer is disclosed. Also disclosed is a substrate comprising a plasma polymerised polyoxazoline polymer film on a surface thereof, a process for preparing a plasma polymerised polyoxazoline polymer film on a surface of a substrate, a substrate comprising an antibiofouling surface, a substrate comprising a plasma polymerised polyoxazoline polymer film on a surface thereof and one or more ligands and/or biomolecules bonded to the polyoxazoline polymer film, and a process for immobilising a biomolecule on a surface of a substrate.

In this study, the ability of porous silicon nanoparticles (PSi NPs) to entrap and deliver nitric oxide (NO) as an effective antibacterial agent is tested against different Gram-positive and Gram-negative bacteria. NO was entrapped inside PSi NPs functionalized by means of the thermal hydrocarbonization (THC) process. Subsequent reduction of nitrite in the presence ofd-glucose led to the production of large NO payloads without reducing the biocompatibility of the PSi NPs with mammalian cells. The resulting PSi NPs demonstrated sustained release of NO and showed remarkable antibacterial efficiency and anti-biofilm-forming properties. These results will set the stage to develop antimicrobial nanoparticle formulations for applications in chronic wound treatment.

Bacterial infections are continuing to pose a significant threat to human health. Coatings with inherent antibacterial properties are becoming increasingly common as an infection preventative measure. The aim of this review is to highlight recent progress in development of "smart" and responsive antibacterial surfaces. The review describes various strategies utilized for generation of such surfaces and the specific stimuli that are used to trigger antibacterial action. It also provides a critical discussion of the advantages and drawbacks of different approaches. The review concludes with a perspective about the future of the field and outlines the challenges and obstacles that need to be overcome in order to make future advances. Refereed/Peer-reviewed