Search

In this study, cationic starch-carrageenan‑sodium alginate (CAS/CR/SA) hydrogels with different weight ratios of carrageenan and sodium alginate were prepared and their properties such as scanning electron microscopy (SEM), rheological properties, Fourier transform infrared spectroscopy (FTIR), 1 H nuclear magnetic resonance ( 1 H NMR), X-ray diffraction (XRD), and methylene blue adsorption test were measured. The results showed that the viscosity and the shear strain resistance of the CAS/CR/SA hybrid hydrogels positively correlated with their sodium alginate contents. The hybrid hydrogels with high carrageenan contents exhibited a high energy storage modulus (G') and a high loss modulus (G"). The swelling and methylene blue adsorption experiments showed that the CAS/CR/SA hydrogels had pH and temperature sensitivity. The hydrogels reached adsorption equilibrium in 12 h (alkaline conditions) and 24-36 h (acidic conditions). The adsorption kinetics of the hybrid hydrogels showed that their adsorption process was mainly controlled by chemisorption and that adsorption was exothermic (ΔH° < 0)., Competing Interests: Declaration of competing interest No conflict of interest exits in the submission of this manuscript, and manuscript is approved by all authors for publication. We confirmed that the figures and tables in revised manuscript are the original work of the authors. I would like to declare on behalf of my co-authors that the work described was original research that has not been published previously, and not under consideration for publication elsewhere, in whole or in part. All the authors listed have approved the manuscript that is enclosed., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Dressings should protect wounds, promote healing, absorb fluids, and maintain moisture. Bacterial cellulose is a biopolymer that stands out in biomaterials due to its high biocompatibility in several applications. In the area of dressings, it is already marketed as an alternative to traditional dressings. However, it lacks any intrinsic activity; among these, the need for antimicrobial activity in infected wounds stands out. We developed a cationic cellulose film by modifying cellulose with 1-(5-carboxypentyl)pyridin-1-ium bromide, enhancing its wettability (contact angle: 26.6°) and water retention capacity (2714.37 %). This modified film effectively retained oxacillin compared to the unmodified control. Liposomal encapsulation further prolonged oxacillin release up to 11 days. Both oxacillin-loaded films and liposomal formulations demonstrated antimicrobial activity against Staphylococcus aureus. Our findings demonstrate the potential of chemically modified cellulose as a platform for controlled anionic antibiotics and/or their formulations delivery in wound care., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: [Renato Ribeiro Viana, Karina Andressa Sedans, Bruna Conceição Costa Silva, Cesar Augusto Tischer and Luis Fernando Cabeça have patent pending to BR10202202711. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper]., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The accurate determination of polar cationic pesticides in food poses a challenge due to their high polarity and trace levels in complex matrices. This study hypothesized that the use of halloysite nanotubes (HNTs) can significantly enhance the extraction efficiency and sensitivity of these analytes because of their rich hydroxyl groups and cation exchange sites. Therefore, we chemically incorporated HNTs with organic polymer monoliths for in-tube solid-phase microextraction (SPME). This novel hybrid monolith extended service life, improved adsorption capacity, and exhibited excellent extraction performance for polar cationic pesticides. Based on these advancements, a robust and sensitive in-tube SPME-HILIC-MS/MS method was constructed to determine trace levels of polar cationic pesticides in complex food matrices. The method achieved limits of detection of 1.9, 2.1, and 0.1 μg/kg for maleic hydrazide, amitrole, and cyromazine, respectively. The spiked recoveries in five food samples ranged from 80.2 to 100.8%, with relative standard deviations below 10.7%., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Many studies show that ortho-phenylenediamine (OPD) produces an oxidized fluorescent product when exposed to an oxidizing agent that enables the direct or indirect fluorescence detection of a range chemical and biochemical analytes. However, there is no report on this unique optical behavior for other two isomers of phenylenediamine. This study demonstrates that a simple hydrothermal treatment of para-phenylenediamine (PPD) in the presence of sulfuric acid results in the formation of fluorescent N, S-doped carbon dots (CDs) with triple functionalities including the reduction of Au 3+ into gold nanoparticles (AuNPs), the stabilization of the produced AuNPs, and the determination of Au 3+ concentration through an intrinsic ratiometric fluorescence signal. In the presence of Au 3+ , the blue emission of CDs at 437 nm quenched, and a green emission at 540 nm emerged. The linear concentration range for the determination of Au 3+ was 20 nM-16 µM with a detection limit of 16 nM. Additionally, the dual emissive CDs-AuNPs hybrid probe showed potential for the indirect fluorescence ratiometric determination of cysteine and sulfide ions. The linear concentration range for cysteine and sulfide ions were 0.25-8 μM and 0.1-6 μΜ, with detection limits of 0.095 μM and 0.041 μM, respectively. Accordingly, CDs were applied to detect Au 3+ and S 2- in real water samples. Moreover, the synthesized CDs showed no cytotoxicity for HeLa cells up to 300 µg mL -1 , as determined by the MTT assay. Therefore, their potential for intracellular imaging of Au 3+ in living cells was also investigated., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: Capillary zone electrophoresis-tandem mass spectrometry (CZE-MS/MS) has become a valuable analytical technique in top-down proteomics (TDP). CZE-MS/MS-based TDP typically employs separation capillaries with neutral coatings (i.e., linear polyacrylamide, LPA). However, issues related to separation resolution and reproducibility remain with the LPA-coated capillaries due to the unavoidable non-specific protein adsorption onto the capillary wall. Cationic coatings can be critical alternatives to LPA coating for CZE-MS/MS-based TDP due to the electrostatic repulsion between the positively charged capillary inner wall and proteoform molecules in the acidic separation buffer. Unfortunately, there are only very few studies using cationic coating-based CZE-MS/MS for TDP studies., Results: In this work, we aimed to develop a simple and efficient approach for preparing separation capillaries with a cationic coating, i.e., poly (acrylamide-co-(3-acrylamidopropyl) trimethylammonium chloride [PAMAPTAC]) for CZE-MS/MS-based TDP. The PAMAPTAC coating-based CZE-MS produced significantly better separation resolution of proteoforms compared to the traditionally used LPA-coated approach. It achieved reproducible separation and measurement of a simple proteoform mixture and a complex proteome sample (i.e., a yeast cell lysate) regarding migration time, proteoform intensity, and the number of proteoform identifications. The PAMAPTAC coating-based CZE-MS enabled the detection of large proteoforms (≥30 kDa) from the yeast cell lysate reproducibly without any size-based prefractionation. Interestingly, the mobility of proteoforms using the PAMAPTAC coating can be predicted accurately using a simple semi-empirical model., Significance: The results render the PAMAPTAC coating as a valuable alternative to the LPA coating to advance CZE-MS-based TDP towards high-resolution separation and highly reproducible measurement of proteoforms in complex samples., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Cationic Manihot esculenta (ME) peel starch was synthesized through etherification method using 3-chloro-2-hydroxypropyl trimethylammonium chloride (CHPTAC) as cationizing monomer. The optimization of the main factors influencing the degree of substitution (DS) was conducted using central composite design (CCD) and response surface methodology (RSM). The factors assessed include CHPTAC concentration, catalyst sodium hydroxide (NaOH) concentration, and reaction time. The DS values of the cationic starches were obtained between 0.39 and 0.99. The maximum DS value was up to 0.99 at 0.615 mol/L of CHPTAC, 30 % (w/v) NaOH, and a reaction time of 5 h. The finding based on the optimization using RSM reflected that CHPTAC and NaOH concentrations are the key variables determining the DS value, while reaction time has a negligible impact on the etherification process. Furthermore, the chemical composition, morphology, and structure of the cationic ME peel starch were characterized by scanning electron microscopy with energy dispersive X-ray spectrometry (SEM-EDX), Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD) and nuclear magnetic resonance spectroscopy ( 1 H NMR). It was confirmed that the modifying monomers penetrated the surface layer of the starch granules and attached to the starch backbone., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Magnetic lignin nanoparticles (MLNs) were prepared by inducing their self-assembly through lignin regeneration in the [N-methyl-2-pyrrolidone][C1-C4 carboxylic acid] ionic liquids ([NMP]ILs), which are low-cost protic ionic liquid. [NMP]ILs are self-assembling solvent that can enhance the adsorption capacity of MLNs to a greater degree than tetrahydrofuran or H 2 O. Additionally, the anion types of [NMP]IL greatly influence the physiochemical properties of MLNs. The MLNs prepared through self-assembly with [NMP][formate] (MLN/[NMP][For]) exhibited a higher maximum adsorption capacity (134.53 mg/g) than the [NMP]ILs of C2-C4 carboxylate anions. MLN/[NMP][For] demonstrated stable adsorption within a pH range of 6-10 or at high salt concentrations (0.01-0.5 mol/L), retaining over 80 % of its regeneration efficiency after 5 cycles. In addition, MLN/[NMP][For] selectively removed cationic dyes in mixed binary anionic-cationic dye solutions. This work demonstrated the feasibility of preparing magnetic biosorbents with good selectivity and stability though regeneration and by adjusting the anions of ionic liquids., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that may appear to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Plasmonic photothermal therapy (PPTT) employing plasmonic gold nanorods (GNRs) presents a potent strategy for eradication of tumors including aggressive brain gliomas. Despite its promise, there is a pressing need for a more comprehensive evaluation of PPTT using sophisticated in vitro models that closely resemble tumor tissues, thereby facilitating the elucidation of therapeutic mechanisms. In this study, we exposed 3D glioma spheroids (tumoroids) to (16-mercaptohexadecyl)trimethylammonium bromide-functionalized gold nanorods (MTAB-GNRs) and a near-infrared (NIR) laser. We demonstrate that the photothermal effect can be fine-tuned by adjusting the nanoparticle concentration and laser power. Depending on the selected parameters, the laser can trigger either regulated or non-regulated cell death (necrosis) in both mouse GL261 and human U-87 MG glioma cell lines, accompanied by translocation of phosphatidylserine in the membrane. Our investigation into the mechanism of regulated cell death induced by PPTT revealed an absence of markers associated with classical apoptosis pathways, such as cleaved caspase 3. Instead, we observed the presence of cleaved caspase 1, gasdermin D, and elevated levels of NLRP3 in NIR-irradiated tumoroids, indicating the activation of pyroptosis. This finding correlates with previous observations of lysosomal accumulation of MTAB-GNRs and the known lysosomal pathway of pyroptosis activation. We further confirmed the absence of toxic breakdown products of GNRs using electron microscopy, which showed no melting or fragmentation of gold nanoparticles under the conditions causing regulated cell death. In conclusion, PPTT using coated gold nanorods offers significant potential for glioma cell elimination occurring through the activation of pyroptosis rather than classical apoptosis pathways., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Background: Cationic liposomes represent a promising non-viral carrier platform for gene delivery. The successful intracellular delivery of genes to the target cell is highly influenced by lipid compositions in the liposomal formulation. In the present study, a Box-Behnken design was applied to investigate the optimal lipid composition for the liposome-based transfection agent., Methods: The concentrations of DOTAP, DSPE-PEG, and cholesterol were set as independent factors. A total of 15 lipid compositions were generated and tested for specific responses, including particle size, encapsulation efficiency, cell viability, and cell transfection. The data were then analyzed to predict the optimal composition using response surface methodology (RSM)., Results: The results for particle size, encapsulation efficiency, cell viability and fluorescence intensity ranged from 158.7 to 2064 nm, 48.19-95.72%, 81.50-122.67%, and 0.0-9.08, respectively. Compositions of liposome-based transfection agent without DOTAP, those without cholesterol, and those containing DSPE-PEG2000 with a molar ratio equal to or greater than that of cholesterol tended to exhibit low encapsulation efficiency. The ability of the liposome to complex DNA, as determined through electrophoresis gel retardation assay, showed that the composition without DOTAP produced DNA bands, indicating that the prepared liposomes had a less ability to complex DNA. The cytotoxicity test results indicated that all lipid compositions were considered non-toxic, as they exhibited >80% cell viability. The cell transfection assay demonstrated that the lipid composition containing a combination of DOTAP and cholesterol was able to transfect DNA into cells. According to response analysis, RSM predicted that the optimal lipid composition consisted of 2.75 μmol DOTAP and 0.91 μmol cholesterol, with a desirability value of 0.85., Conclusions: Although the equation model is still acceptable for predicting the optimal lipid composition, further study is needed to obtain a model with higher desirability, such as by using more lipid compositions, increased replications, and different variable responses., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

A cation channel possessing cascaded hydrated acid groups has been successfully constructed using pillar[5]arene integrated with dual cyclodextrins. As a proof-of-concept, the secondary side of cyclodextrin substituted by 24 -CO 2 H groups presents high coordination sites, which helps hydrated cations to quickly dehydrate and accelerates efficient cation transport (Rb + > Cs + > K + > Na + > Li + ). Notably, benefitted by the protonation and deprotonation of -CO 2 H groups, ion permeation activity of the channel molecules under acidic condition (pH = 6.0) is 2.8 times higher than that under alkaline conditions (pH = 8.0), exhibiting pH-modulated property and promising potential in building intelligent artificial ion channels with customized features.

This study delves into the nature of individual hydrogen bonds and the relationship between metal cations and hydrogen bonding in the Watson-Crick guanine-cytosine (GC) base pair and its alkali and alkaline earth cation-containing complexes (M n+ -GC). The findings reveal how metal cations affect the nature and strength of individual hydrogen bonds. The study employs interacting quantum atoms (IQA) analysis to comprehensively understand three individual hydrogen bonds within the GC base pair and its cationic derivatives. These analyses unveil the nature and strength of hydrogen bonds and serve as a valuable reference for exploring the impact of cations (and other factors) on each hydrogen bond. All the H ⋯ D interactions (H is hydrogen and D is oxygen or nitrogen) in the GC base pair are primarily electrostatic in nature, with the charge transfer component playing a substantial role. Introducing a metal cation perturbs all H ⋯ D interatomic interactions in the system, weakening the nearest hydrogen bond to the cation (indicated by a) and reinforcing the other (b and c) interactions. Notably, the interaction a, the strongest H ⋯ D interaction in the GC base pair, becomes the weakest in the M n+ -GC complexes. A broader perspective on the stability of GC and M n+ -GC complexes is provided through interacting quantum fragments (IQF) analysis. This approach considers all pairwise interactions between fragments and intra-fragment components, offering a complete view of the factors that stabilize and destabilize GC and M n+ -GC complexes. The IQF analysis underscores the importance of electron sharing, with the dominant contribution arising from the inter-fragment exchange-correlation term, in shaping and sustaining GC and M n+ -GC complexes. From this point of view, alkaline and alkaline earth cations have distinct effects, with alkaline cations generally weakening inter-fragment interactions and alkaline earth cations strengthening them. In addition, IQA and IQF calculations demonstrate that the hydration of cations led to small changes in the hydrogen bonding network. Finally, the IQA interatomic energies associated with the hydrogen bonds and also inter-fragment interaction energies provide robust indicators for characterizing hydrogen bonds and complex stability, showing a strong correlation with total interaction energies., (© 2024 Wiley Periodicals LLC.)

The low solubility of α-tocopherol in water and its susceptibility to photodegradation make it difficult for biological systems to absorb this natural antioxidant. To overcome these limitations, α-tocopherol was encapsulated in low-toxicity nanocontainers, namely, niosomes based on Tween 80 and cholesterol. The niosomes were modified with cationic surfactants containing a carbamate fragment. The size and charge of the particles were determined and their stability was assessed using dynamic and electrophoretic light scattering methods. It was found that the introduction of cationic surfactants to niosome formulations significantly improved their physicochemical properties and increased stability due to a positive charge of up to +40 mV being generated. Modified niosomes loaded with α-tocopherol were characterized by a hydrodynamic diameter of 100-120 nm, a narrow particle size distribution, and a high encapsulation efficiency of more than 90%. Testing the photochemical stability of α-tocopherol using a spectrophotometric method demonstrated that niosomes were able to protect this substance from UV irradiation. Luminescence analysis showed that the inclusion of α-tocopherol in niosomes increased their antioxidant activity by 30%. An acute toxicity study has demonstrated the safety of the systems. The LD 50 value for niosomes modified with carbamate-containing surfactants and loaded with α-tocopherol exceeded 10,000 mg·kg -1 (mice, intraperitoneal and oral administration).

Last decade, extracellular vesicles (EVs) attracted a lot of attention as potent versatile drug delivery vehicles. We reported earlier the development of EV-based delivery systems for therapeutic proteins and small molecule chemotherapeutics. In this work, we first time engineered EVs with multivalent cationic lipids for the delivery of nucleic acids. Stable, small size cationized EVs were loaded with plasmid DNA (pDNA), or mRNA, or siRNA. Nucleic acid loaded EVs were efficiently taken up by target cells as demonstrated by confocal microscopy and delivered their cargo to the nuclei in triple negative breast cancer (TNBC) cells and macrophages. Efficient transfection was achieved by engineered cationized EVs formulations of pDNA- and mRNA in vitro. Furthermore, siRNA loaded into cationized EVs showed significant knockdown of the reporter gene in Luc-expressing cells. Overall, multivalent cationized EVs represent a promising strategy for gene delivery., (© 2024. The Author(s).)

Tolterodine tartrate (TOT) is a selective anti-muscarinic drug to treat urinary urgency and overactive urinary bladder (OAB) occurring in children, renal disease and elderly patients. Oral delivery is associated with several adverse effects. We addressed HSPiP and QbD (quality by design)-oriented TOT loaded cationic nanoemulsions for transdermal delivery. Hansen solubility parameters (HSP) screened excipients based on theoretical solubility whereas, QbD optimized cationic nanoemulsions (CNE-TOT-6). Formulation characteristic parameters were desirable to execute targeted in vitro drug release and ex vivo permeation profiles. In vitro hemolysis was conducted at varied concentrations whereas, histopathological study supported the safety aspect of CNE-TOT6. A comparative bioavailability was carried out in a rat model. Capmul PG8 (CAP), tween 80, and PEG 400 (polyethylene glycol 400) were screened based on HSP and experimental solubility data. QbD suggested optimized content of CAP, tween 80, and PEG 400 to achieve the lowest value of size (184 nm), maximum % entrapment efficiency (87.2 %), high zeta potential (+32.6 mV), optimum viscosity (47.19 cP), and high extrudability (96 %) as compared to its gel. High gel consistency slowed down the drug release and permeation flux as compared to CNE-TOT6 suspension. Hemocompatible CNE-TOT6 increased pharmacokinetic parameters as compared to the control and gel without causing skin toxicity after application. Thus, HSPiP and QbD oriented cationic nanoemulsions are promising carriers to treat overactive urinary bladder., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Thermoplastic polyurethanes (TPUs) are one of the most appealing materials with extensive applications in biomedical fields due to their versatile mechanical properties and excellent biocompatibility. In response to the escalating challenges of bacterial infections, it is desirable to obtain TPUs with intrinsic antibacterial activity, particularly for application in biomedical devices and public places. Herein, a cationic main-/side-chain structure regulation strategy in the TPU hard segment was adopted to introduce and optimize the antibacterial activity. This was achieved by synthesizing two types of quaternary ammonium salts (QAS)-containing chain extenders, i.e., N -methyl- N -alkyl- N , N -bis(2-hydroxyethyl) ammonium bromide (M n , where n represents the N -alkyl chain length) and N,N -dimethyl- N -alkyl- N -2,3-propylene glycol (D n ), from N -methyldiethanolamine (MDEA) and 3-dimethylamino-1,2-propanediol (DMAD), respectively. Given the structural differences between M n and D n , main-chain-type PU-M n and side-chain-type PU-D n were subsequently obtained with QAS groups in the hard segment. The N -alkyl chain length, QAS content, and main-/side-chain types were systematically investigated to optimize bactericidal properties. The results revealed that a long N -alkyl chain (from C6 to C14) increased the antibacterial activity of the chain extenders and corresponding TPU films. Besides, side-chain-type PU-D n films showed higher contact-active antibacterial activity than that exerted by the main-chain-type PU-M n films. Remarkably, almost 100% of Staphylococcus aureus ( S . aureus ) could be killed by the PU-D14 film with a low QAS content (1.6 wt %). All the TPUs showed good thermal stability with a degradation temperature of 5% mass loss ( T d,5% ) above 300 °C. Moreover, the TPU films displayed excellent mechanical properties with the tensile strength at break varying from 20.7 to 47.5 MPa and ultimate elongation above 1000%. All of the intrinsic antibacterial films showed negligible hemolytic activities.

The loading capacity of dsRNA by nanocarriers is a key parameter in the process of RNAi commercialisation. In this research, a sustainable, simple, and cheap method was developed to determine the dsRNA loading capacity by popular cationic nanocarriers. In this method, the fluorescence emission of the cationic nanocarrier + (dsRNA-DAPI) shows blue shift in comparison to that of dsRNA-DAPI. When dsRNA-DAPI is completely loaded by cationic nanocarriers, the fluorescence peak coincides with the emission wavelength of DNA-DAPI. The samples of nanocarrier + (dsRNA-DAPI) are simply tested in a fluorometer with no damage to the samples. The reported method is simpler, cheaper, and more sustainable than gel electrophoresis and HPLC, and will fulfill the industry need for reliable and quick quality administration/control in the production process.

Potassium cations play many important roles in living organisms, especially in electro-physiology, since they are involved in neurotransmission and muscle contractions. We report the synthesis of a ratiometric fluorescent microsensor for potassium (K + ) detection, based on the fluorescent probe ION potassium green 4. Potassium-sensitive fluorescent microparticles were obtained by using silica as the core material. We obtained silica-based microsensors with sizes in the micrometer range, spherical shapes, good monodispersity, optimal selectivity and a sensitivity range of 0 to 40 mM. The microsensors also proved to be non-toxic in cell cultures and suitable for fluorescence imaging, offering new possibilities for non-invasive optical detection, quantification and in situ monitoring of K + variations in cell culture systems.

Lipid-based nanomaterials are used as a common delivery vehicle for RNA therapeutics. They typically include a formulation containing ionizable cationic lipids, cholesterol, phospholipids, and a small molar fraction of PEGylated lipids. The ionizable cationic lipids are considered a crucial element of the formulation for the way they mediate interactions with the anionic RNA as a function of pH. Here, we show, by means of molecular dynamics simulation of lipid formulations containing two different ionizable cationic lipids (DLinDMA and DLinDAP), that the direct interactions of those lipids with RNA, taken alone, may not be sufficient to determine the level of protection and packaging of mRNA. Our simulations help and highlight how the collective behavior of the lipids in the formulation, which determines the ability to envelop the RNA, and the level of hydration of the lipid-RNA interface may also play a significant role. This allows the drawing of a hypothesis about the experimentally observed differences in the transfection efficiency of the two ionizable cationic lipids.

Multidrug resistance (MDR) is a rising threat to global health because the number of essential antibiotics used for treating MDR infections is increasingly compromised. In this work we report a group of new amphiphilic peptides (AMPs) derived from the well-studied G 3 (G(IIKK) 3 I-NH 2 ) to fight infections from Gram-positive bacteria including susceptible Staphylococcus aureus and methicillin-resistant Staphylococcus aureus (MRSA), focusing on membrane interactions. Time-dependent killing experiments revealed that substitutions of II by WW (GWK), II by FF (GFK) and KK by RR (GIR) resulted in improved bactericidal efficiencies compared to G 3 (GIK) on both S. aureus and MRSA, with the order of GWK > GIR > GFK > GIK. Electronic microscopy imaging revealed structural disruptions of AMP binding to bacterial cell walls. Fluorescence assays including AMP binding to anionic lipoteichoic acids (LTA) in cell-free and cell systems indicated concentration and time-dependent membrane destabilization associated with bacterial killing. Furthermore, AMP's binding to anionic plasma membrane via similar fluorescence assays revealed a different extent of membrane depolarization and leakage. These observations were supported by the penetration of AMPs into the LTA barrier and the subsequent structural compromise to the cytoplasmic membrane as revealed from SANS (small angle neutron scattering). Both experiments and molecular dynamics (MD) simulations revealed that GWK and GIR could make the membrane more rigid but less effective in diffusive efficiency than GIK and GFK through forming intramembrane peptide nanoaggregates associated with hydrophobic mismatch and formation of fluidic and rigid patches. The reported peptide-aggregate-induced phase-separation emerged as a crucial factor in accelerated membrane disintegration and fast bacterial killing. This work has demonstrated the importance of membrane interactions to the development of more effective AMPs and the relevance of the approaches as reported in assisting this area of research., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

Here, we demonstrate that the spatial distribution of lipophilic cations governs the complexation pathways, serum stability, and biological performance of polymer-pDNA complexes (polyplexes). Previous research focused on block/statistical copolymers, whereas gradient copolymers, where the density of lipophilic cations diminishes (gradually or steeply) along polymer backbones, remain underexplored. We engineered gradient copolymers that combine the polyplex colloidal stability of block copolymers with the transfection efficiency of statistical copolymers. We synthesized length- and compositionally equivalent gradient copolymers ( G1 - G3 ) along with statistical ( S ) and block ( B ) copolymers of 2-(diisopropylamino)ethyl methacrylate and 2-hydroxyethyl methacrylate. We mapped how polymer microstructure governs pDNA loading per polyplex, pDNA conformational changes, and polymer-pDNA binding thermodynamics via static light scattering, circular dichroism spectroscopy, and isothermal titration calorimetry, respectively. While gradient steepness is a powerful design handle to improve polyplex physical properties, augment pDNA delivery capacity, and attenuate polycation-triggered hemolysis, microstructural contrasts did not elicit differences in complement activation.

Cationic amphipathic antimicrobial agents inspired by antimicrobial peptides (AMPs) have shown potential in combating multidrug-resistant bacteria because of minimal resistance development. Here, this study focuses on the development of novel cationic amphipathic macromolecules in the form of dendrons and polymers with different molecular weights that employ secondary amine piperidine derivative as the cationic moiety. Generally, secondary amine compounds, especially at low molecular weights, have stronger bacteriostatic, bactericidal, and inner membrane disruption abilities than those of their primary amine counterparts. Low molecular weight D2 dendrons with two cationic centers and one hydrophobic dodecyl chain produce outstanding synergistic activity with the antibiotic rifampicin against Escherichia coli , where one-eighth of the standalone dose of D2 dendrons could reduce the concentration of rifampicin required by up to 4000-fold. The low molecular weight compounds are also less toxic and therefore have higher therapeutic index values compared to compounds with larger molecular weights. This study thus reveals key information that may inform the design of future synthetic AMPs and mimics, specifically, the design of low-molecular-weight compounds with secondary amine as the cationic center to achieve high antimicrobial potency and biocompatibility.

Specific lipid isomers are functionally critical, but their structural rigidity and usually minute geometry differences make separating them harder than other biomolecules. Such separations by ion mobility spectrometry (IMS) were recently enabled by new high-definition methods using dynamic electric fields, but major resolution gains are needed. Another problem of identifying many isomers with no unique fragments in ergodic collision-induced dissociation (CID) was partly addressed by the direct ozone-induced dissociation (OzID) that localizes the double bonds, but a low reaction efficiency has limited the sensitivity, dynamic range, throughput, and compatibility with other tools. Typically lipids are analyzed by MS as singly charged protonated, deprotonated, or ammoniated ions. Here, we explore the differential IMS (FAIMS) separations with OzID for exemplary lipids cationized by polyvalent metals. These multiply charged adducts have much greater FAIMS compensation voltages ( U C ) than the 1+ ions, with up to 10-fold resolution gain enabling baseline isomer separations even at a moderate resolving power of the SelexION stage. Concomitantly OzID speeds up by many orders of magnitude, producing a high yield of diagnostic fragments already in 1 ms. These capabilities can be ported to the superior high-definition FAIMS and high-pressure OzID systems to take lipidomic analyses to the next level.

We report biochemical and structural studies on inhibiting bacterial S -adenosyl-L-homocysteine hydrolase by transition metal cations. Our results revealed diverse molecular mechanisms of enzyme inactivation. Depending on the cation, the mechanism is based on arresting the enzyme in its closed, inactive conformation, disulfide bond formation within the active site or oxidation of the intermediate form of a cofactor.

The potent neurotoxic venom of the black widow spider contains a cocktail of seven phylum-specific latrotoxins (LTXs), but only one, α-LTX, targets vertebrates. This 130 kDa toxin binds to receptors at presynaptic nerve terminals and triggers a massive release of neurotransmitters. It is widely accepted that LTXs tetramerize and insert into the presynaptic membrane, thereby forming Ca 2+ -conductive pores, but the underlying mechanism remains poorly understood. LTXs are homologous and consist of an N-terminal region with three distinct domains, along with a C-terminal domain containing up to 22 consecutive ankyrin repeats. Here we report cryoEM structures of the vertebrate-specific α-LTX tetramer in its prepore and pore state. Our structures, in combination with AlphaFold2-based structural modeling and molecular dynamics simulations, reveal dramatic conformational changes in the N-terminal region of the complex. Four distinct helical bundles rearrange and together form a highly stable, 15 nm long, cation-impermeable coiled-coil stalk. This stalk, in turn, positions an N-terminal pair of helices within the membrane, thereby enabling the assembly of a cation-permeable channel. Taken together, these data give insight into a unique mechanism for membrane insertion and channel formation, characteristic of the LTX family, and provide the necessary framework for advancing novel therapeutics and biotechnological applications., (© 2024. The Author(s).)

Long double-stranded (ds)RNA, a potent stimulator of type I interferon and the innate immune response. In the present study, we demonstrated, for the first time, the efficacy of cationic polystyrene latex nanostructures (clNPs) as a dsRNA carrier, improving cellular delivery and robustly potentiating the immunostimulatory capacity of dsRNA in the ovarian cancer cell line SKOV3. The clNPs complexed with an in vitro transcribed dsRNA molecule, were bound by SKOV3 cells, and had increased cellular association compared to uncomplexed clNPs. clNPs complexed with dsRNA induced a more robust innate immune response compared to dsRNA alone. Transcript expression of two interferon-stimulated genes, were increased 47- and 108-fold over dsRNA and induced a significant antiviral state against vesicular-stomatitis virus, resulting in a 3.3-fold improvement on the efficacy of dsRNA. These data highlight the potential of polystyrene latex nanostructures as dsRNA carriers for anticancer immunotherapies, improving the uptake and efficacy of the nucleic acid., (© 2024 The Author(s). Journal of Biomedical Materials Research Part B: Applied Biomaterials published by Wiley Periodicals LLC.)

A series of potassium isothiocyanato-(N-salicylidene-aminoacidato) cuprates (1-5) with the general formula of the monomeric unit K[Cu(sal-aa)(NCS)] ⋅ xH 2 O (x=0 or 2), containing a Schiff-base ligand (H 2 sal-aa) derived from natural amino acids such as glycine, DL-α-alanine, DL-valine, DL-phenylalanine and β-alanine, and salicylaldehyde, was screened for in vitro antiradical and major cellular effects against selected cancerous and normal cells. The complexes exhibited strong antioxidant properties against superoxide in vitro and a protective effect on DNA under Fenton-like reaction conditions. Screening of their cellular effects revealed moderate in vitro cytotoxicity against human cancer cell lines (A2780, A2780R and MCF-7), with IC 50 values of 25-35 μM, and relatively low toxicity to normal fibroblast MRC-5 cells (with IC 50 values>50 μM). Additional experiments performed on A2780 cells revealed that the most potent complex 5 significantly increased the number of A2780 cells arrested in the G2/M phase of the cell cycle and triggered intracellular oxidative stress. The selected flow cytometry experiments (detection of apoptosis/autophagy and activation of caspases 3/7 and depletion of mitochondrial membrane potential) did not reveal the dominant mechanism underlying the cytotoxicity of the complexes but clearly differentiated their molecular effects from those of the reference drug cisplatin. All the complexes exerted anti-inflammatory effects by modulating the levels of the proinflammatory cytokines TNF-α and IL-1β in LPS-activated THP-1 macrophage-like cells. Complex 5 also slightly influenced the activity of the upstream NF-κB transcription factor, while no effect on PPARγ activation was detected., (© 2024 The Authors. ChemMedChem published by Wiley-VCH GmbH.)

This study presents a thrombin-loaded cationized chitosan (TCCS) sponge with highly effective hemostatic and antibacterial activity. The TCCS sponge, prepared using a multistep method, features a porous structure, favorable mechanical properties, excellent water absorption ability, and shape recovery triggered by water or blood. The TCCS sponge exhibited strong antibacterial activity against Methicillin-resistant Staphylococcus aureus and Escherichia coli. Additionally, it demonstrated enhanced procoagulant and hemostatic efficacy in rat tail amputation and rat liver perforation wound models compared to commercial hemostats. Furthermore, the sponge exhibited favorable biocompatibility and biosafety. These findings suggest that the TCCS sponge has substantial potential for practical applications in managing severe hemorrhages and bacterial infections., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The optimization of hydrogel structure is crucial for adsorption capacity, mechanical stability, and reusability. Herein, a chitosan and laponite-XLS co-doped poly(acrylic acid-co-acrylamide) hydrogel (CXAA) with honeycomb-like porous structures is synthesized by cooperative cross-linking of 2-hydroxypropyltrimethyl ammonium chloride chitosan (HACC) and laponite-XLS in reticular frameworks of acrylic acid (AAc) and acrylamide (AM). The CXAA exhibits extraordinary mechanical performances including tough tensile strength (3.36 MPa) and elasticity (2756 %), which facilitates recycling in practical adsorption treatment and broadens potential applications. Since the regular porous structures can fully expose numerous adsorption sites and electronegative natures within polymer materials, CXAA displays efficient and selective adsorption properties for cationic dyes like methylene blue (MB) and malachite green (MG) from mixed pollutants and can reach record-high values (MB = 6886 mg g -1 , MG = 11,381 mg g -1 ) compared with previously reported adsorbents. Therefore, CXAA exhibits promising potential for separating cationic and anionic dyes by their charge disparities. Mechanism studies show that the synergistic effects of HACC, laponite-XLS, and functional groups in monomers promote highly efficient adsorption. Besides, the adsorption capacity of CXAA remains stable even after undergoing five cycles of regeneration. The results confirm that CXAA is a promising adsorbent for effectively removing organic dyes in wastewater., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The objective of this research was to develop and assess chitosan-grafted copolymer/HZSM5 zeolite Schiff base nanofibers for Cu 2+ and Zn 2+ adsorption from aqueous media. Nanofibers were prepared via electrospinning and characterized using XRD, FTIR, 1 H NMR, FESEM, TGA, BET, and XPS. The study evaluated the effect of unmodified HZSM5 and Schiff base functionalization on adsorption capacities. Incorporating 10.0 wt% zeolite Schiff base as the optimum content into the chitosan-grafted copolymer significantly enhanced adsorption, achieving increases of 98.2 % for Zn 2+ and 42.2 % for Cu 2+ . Specifically, Zn 2+ adsorption increased from 27.6 to 54.7 mg/g, and Cu 2+ from 67.1 to 95.4 mg/g. Factors such as temperature, pH, adsorption time, and initial cation concentration were analyzed. Kinetic studies revealed a double-exponential model, and isotherm analysis indicated a good fit with the Redlich-Peterson model, showing maximum monolayer capacities of 310.1 mg/g for Cu 2+ and 97.8 mg/g for Zn 2+ (pH 6.0, 240 min, 45 °C). The adsorption thermodynamics indicated a spontaneous and endothermic adsorption. Reusability tests showed minimal capacity loss (4.91 % for Cu 2+ and 5.59 % for Zn 2+ ) after five cycles. The nanofiber displayed greater selectivity for Cu 2+ over Zn 2+ in multi-ion systems and real electroplating wastewater, highlighting its potential for targeted heavy metal removal., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Two innovative early/late Ti-Pt-heterobimetallic complexes were synthesized, characterized, and screened in cell-based assays using several human (SW480 and MDA-MB-231) and murine cancer cell lines (CT26 and EMT6) as well as a non-cancerous cell line (HMEC). The combination of the two metals - titanium(IV) and platinum (IV) - in a single molecule led to a synergistic biological activity (higher anti-proliferative properties than a mixture of each of the corresponding monometallic complexes). This study also investigated the benefits of associating a metal-free terpyridine moiety (with intrinsic biological activity) with a water-soluble titanocene fragment. The present work reveals that these combinations results in water-soluble titanocene compounds displaying an anti-proliferative activity down to the submicromolar level. One of these complexes induced an antitumor effect in vivo in CT26 tumor bearing BALB/C mice. The terpyridine moiety was also used to track the complex in vitro by multiphoton microscopy imaging., (© 2024 The Authors. ChemBioChem published by Wiley-VCH GmbH.)

More sustainable materials have been becoming an important concern of worldwide scientists, and cellulosic materials are one alternative in water decontamination. An efficient strategy to improve removal capacity is functionalizing or incorporating nanomaterials in cellulose-based materials. The new hybrid cDAC/ZnONPs was produced by green synthesis of zinc oxide nanoparticles (ZnONPs), promoting the in situ reduction and immobilization on the cationic dialdehyde cellulose microfibers (cDAC) surface to remove Congo red dye from water. cDAC/ZnONPs was characterized by scanning electron microscopy (SEM-EDS) and infrared spectroscopy (FTIR), which showed efficient nanoparticles reduction. Adsorption efficiency on cationic cellulose surface was investigated by pH, contact time, initial concentration, and dye selectivity tests. The material followed the H isotherm model, which resulted in a maximum adsorption capacity of 1091.16 mg/g. Herein, was developed an efficient and ecologically correct new adsorbent, highly effective in Congo red dye adsorption even at high concentrations, suitable for the remediation of contaminated industrial effluents., Competing Interests: Declaration of competing interest Gabrieli Roefero Tolosa reports financial support was provided by Coordination of Higher Education Personnel Improvement. Andressa Silva Gomes reports financial support was provided by State of Sao Paulo Research Foundation. Maria Vitoria Guimaraes Leal reports financial support was provided by State of Sao Paulo Research Foundation. Guilherme Dognani reports financial support was provided by State of Sao Paulo Research Foundation., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Adjuvants play a critical role in the induction of effective immune responses by vaccines. Here, a self-assembling nanovaccine platform that integrates adjuvant functions into the delivery vehicle is prepared. Cationic Lentinan (CLNT) is mixed with ovalbumin (OVA) to obtain a self-assembling nanovaccine (CLNTO nanovaccine), which induces the uptake and maturation of bone marrow dendritic cells (BMDCs) via the toll-like receptors 2/4 (TLR2/4) to produce effective antigen cross-presentation. CLNTO nanovaccines target lymph nodes (LNs) and induce a robust OVA-specific immune response via TLR and tumor necrosis factor (TNF) signaling pathways, retinoic acid-inducible gene I (RIG-I) receptor, and cytokine-cytokine receptor interactions. In addition, CLNTO nanovaccines are found that promote the activation of follicular helper T (Tfh) cells and induce the differentiation of germinal center (GC) B cells into memory B cells and plasma cells, thereby enhancing the immune response. Vaccination with CLNTO nanovaccine significantly inhibits the growth of ovalbumin (OVA)-expressing B16 melanoma cell (B16-OVA) tumors, indicating its great potential for cancer immunotherapy. Therefore, this study presents a simple, safe, and effective self-assembling nanovaccine that induces helper T cell 1 (Th1) and helper T cell (Th2) immune responses, making it an effective vaccine delivery system., (© 2024 Wiley‐VCH GmbH.)

Magnetic resonance imaging (MRI) relies on appropriate contrast agents, especially for visualizing transplanted cells within host tissue. In recent years, compounds containing fluorine-19 have gained significant attention as MRI probe, particularly in dual 1 H/ 19 F-MR imaging. However, various factors affecting probe sensitivity, such as fluorine content and the equivalency of fluorine atoms, must be considered. In this study, we synthesized fluorinated micelles with adjustable surface positive charge density and investigated their physicochemical properties and MRI efficacy in phantoms and labeled cells. While the micelles exhibited clear signals in 19 F-MR spectra and imaging, the concentrations required for MRI visualization of labeled cells were relatively high, adversely affecting cell viability. Despite their favourable physicochemical properties, achieving higher labeling rates without compromising cell viability during labeling remains a challenge for potential in vivo applications., (© 2024. The Author(s).)

As a precursor to various reactive nitrogen species formed in biological systems, nitric oxide (•NO) participates in numerous processes, including enhancing DNA radiosensitivity in ionizing radiation-based radiotherapy. Forming guanine radical cations is another common DNA lesion resulting from ionization and oxidation damage. As such, the interaction of •NO with guanine radical cations (G•+) may contribute to the radiosensitization of •NO. An intriguing aspect of this process is the participation of multiple spin configurations in the reaction, including open-shell singlet 1,OS[G•+(↑)⋯(↓)•NO], closed-shell singlet 1,CS[G(↑↓)⋯NO+], and triplet 3[G•+(↑)⋯(↑)•NO]. In this study, the reactions of •NO with both unsubstituted guanine radical cations (in the 9HG•+ conformation) and 9-methylguanine radical cations (9MG•+, a guanosine-mimicking model compound) were investigated in the absence and presence of monohydration of radical cations. Kinetic-energy dependent reaction product ions and cross sections were measured using an electrospray ionization guided-ion beam tandem mass spectrometer. The reaction mechanisms, kinetics, and dynamics were comprehended by interpreting the reaction potential energy surface using spin-projected density functional theory, coupled cluster theory, and multiconfiguration complete active space second-order perturbation theory, followed by RRKM kinetics modeling. The combined experimental and computational findings revealed closed-shell singlet 1,CS[7-NO-9MG]+ as the major, exothermic product and triplet 3[8-NO-9MG]+ as the minor, endothermic product. Singlet biradical products were not detected due to high reaction endothermicities, activation barriers, and inherent instability., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

Purpose: We aimed to prepare a β-cyclodextrin (β-CD) polymer using radical polymerization with co-monomers, 6-deoxy-6-(2-methacryloyloxyethylsuccinamide)-β-cyclodextrin (CD-MSAm) and N,N,N-trimethyl-N-(2-hydroxy-3-metacryloyloxopropyl)-ammonium chloride (QA) to design cyclodextrins suitable for use in ophthalmology. In addition, we evaluated their solubility and inclusion properties with rebamipide (REB), a poorly soluble drug, and investigated the usefulness of the β-CD polymer and REB (REB@CDQA) combination in treating dry eye., Methods: The β-CD polymer (CD-MSAm-co-QA, CDQA) based on CD-MSAm/QA was prepared via radical polymerization, and the usefulness of REB@CDQA in treating dry eye was evaluated using a rabbit treated with N-acetylcysteine (dry eye model)., Results: The solubility of the CDQA powder was higher than that of the β-CD powder, and 80 nm colloids were observed in the CDQA solution. No corneal toxicity was observed in human corneal epithelial cells or rat corneas treated with 0.2% CDQA solution. The levels of REB dissolved in the CDQA solution were higher than those of the β-CD solution. Moreover, the application of the CDQA solution enhanced REB retention in the cornea and attenuated the transcorneal penetration of REB. In addition, instillation of REB@CDQA enhanced the volume of the lacrimal fluid and normalized the reduced mucin levels in the dry eye model. The extent of tear film breakup was attenuated by REB@CDQA instillation., Conclusion: The CDQA solution enhanced the solubility of REB, and the combination of CDQA and REB enhanced the drug content in the corneal tissue. Moreover, the therapeutic effect on dry eye was higher than that of REB suspensions without CDQA., Competing Interests: Ko Kobayashi, Masaru Matsuda, Norio Iwakiri, and Eiji Harata worked for NOF CORPORATION. The authors declare no other conflicts of interest in this work., (© 2024 Otake et al.)

The development of intelligent multifunctional nanopesticides featuring enhanced foliage affinity and hierarchical target release is increasingly pivotal in modern agriculture. In this study, a novel cationic amphiphilic comb-shaped polymer, termed PEI-TA, was prepared via a one-step Michael addition between low-molecular-weight biodegradable polyethylenimine (PEI) and tetradecyl acrylate (TA), followed by neutralization with acetic acid. Using the emulsifier PEI-TA, a positively charged avermectin (AVM) nanoemulsion was prepared via a phase inversion emulsification process. Under optimal formulation, the obtained AVM nanoemulsion (defined as AVM@PEI-TA) demonstrated exceptional properties, including small size (as low as 67.6 nm), high encapsulation efficiency (up to 87.96%), and high stability toward shearing, storage, dilution, and UV irradiation. The emulsifier endowed AVM@PEI-TA with a pronounced thixotropy, so that the droplets exhibited no splash and bounce when they were sprayed on the cabbage leaf. Owing to the electrostatic attraction between the emulsifier and the leaf, AVM@PEI-TA showed improved leaf adhesion, better deposition, and higher washing resistance in contrast to both its negatively charged counterpart and AVM emulsifiable concentrate (AVM-EC). Compared to the large-sized particles, the small-sized particles of the AVM nanoemulsion more effectively traveled long distances through the vascular system of veins after entering the leaf apoplast. Moreover, the nanoparticles lost stability when exposed to multidimensional stimuli, including pH, temperature, esterase, and ursolic acid individually or simultaneously, thereby promoting the release of AVM. The release mechanisms were discussed for understanding the important role of the emulsifier in nanopesticides.

Anionic polyelectrolytes, such as DNA, are attracted to anionic surfaces in the presence of multivalent cations. A major barrier toward molecular-level understanding of these attractive interactions is the paucity of measurements of the binding strength. Here, atomic force microscopy-based single molecule force spectroscopy was used to quantify the binding free energy of double-stranded DNA to an anionic surface, with complementary density functional theory calculations of the binding energies of metal ion-ligand complexes. The results support both electrostatic attraction and ion-specific binding. Our study suggests that the correlated interactions between counterions are responsible for attraction between DNA and an anionic surface, but the strength of this attraction is modulated by the identity of the metal ion. We propose a mechanism in which the strength of metal-ligand binding, as well as the preference for particular binding sites, influence both the concentration dependence and the strength of the DNA-surface interactions.

Targeted and efficient gene delivery systems hold tremendous potential for the improvement of cancer therapy by enabling appropriate modification of biological processes. Herein, we report the design and synthesis of a novel cationic di-block copolypeptide, incorporating homoarginine (HAG) and shikimoyl (LSA) functionalities (HDA-b-PHAGm-b-PLSAn), tailored for enhanced gene transfection specifically in cancer cells. The di-block copolypeptide was synthesized via sequential N -carboxyanhydride (NCA) ring-opening polymerization (ROP) techniques and its physicochemical properties were characterized, including molecular weight, dispersity, secondary conformation, size, morphology, and surface charge. In contrast to the cationic poly-L-homoarginine, we observed a significantly reduced cytotoxic effect of this di-block copolypeptide due to the inclusion of the shikimoyl glyco-polypeptide block, which also added selectivity in internalizing particular cells. This di-block copolypeptide was internalized via mannose-receptor-mediated endocytosis, which was investigated by competitive receptor blocking with mannan. We evaluated the transfection efficiency of the copolypeptide in HEK 293T (noncancerous cells), MDA-MB-231 (breast cancer cells), and RAW 264.7 (dendritic cells) and compared it with commonly employed transfection agents (Lipofectamine). Our findings demonstrate that the homoarginine and shikimoyl-functionalized cationic di-block copolypeptide exhibits potent gene transfection capabilities with minimal cytotoxic effects, particularly in cancer cells, while it is ineffective for normal cells, indicative of its potential as a promising platform for cancer cell-specific gene delivery systems. To evaluate this, we delivered an artificially designed miRNA-plasmid against Hsp90 (amiR-Hsp90) which upon successful transfection depleted the Hsp90 (a chaperone protein responsible for tumour growth) level specifically in cancerous cells and enforced apoptosis. This innovative approach offers a new avenue for the development of targeted therapeutics with an improved efficacy and safety profile in cancer treatment.

Hydrated dispersions containing equimolar mixtures of cationic and anionic amphiphiles, referred to as catanionic systems, exhibit synergistic physicochemical properties, and mixing single-chain cationic and anionic lipids can lead to the spontaneous formation of vesicles as well as other phase structures. In the present work, we have characterized two catanionic systems prepared by mixing N -acyltaurines (NATs) and sarcosine alkyl esters (SAEs) bearing 11 and 12 C atoms in the acyl/alkyl chains. Turbidimetric and isothermal titration calorimetric studies revealed that both NATs form equimolar complexes with SAEs having matching acyl/alkyl chains. The three-dimensional structure of the sarcosine lauryl ester (lauryl sarcosinate, LS)- N -lauroyltaurine (NLT) equimolar complex has been determined by single-crystal X-ray diffraction. The LS-NLT equimolar complex is stabilized by electrostatic attraction and multiple hydrogen bonds, including classical, strong N-H···O hydrogen bonds as well as several C-H···O hydrogen bonds between the two amphiphiles. DSC studies showed that both equimolar complexes show single sharp phase transitions. Transmission electron microscopy and dynamic light scattering studies have demonstrated that the LS-NLT catanionic complex assemblies yield stable medium-sized vesicles (diameter 280-350 nm). These liposomes were disrupted at high pH, suggesting that the designed catanionic complexes can be used to develop base-labile drug delivery systems. In vitro studies with these catanionic liposomes showed efficient entrapment (73% loading) and release of the anticancer drug 5-fluorouracil in the physiologically relevant pH range of 6.0-8.0. The release rate was highest at pH 8.0, reaching about 78%, 90%, and 100% drug release at 2, 6, and 12 h, respectively. These observations indicate that LS-NLT catanionic vesicles will be useful for designing drug delivery systems, particularly for targeting organs such as the colon, which are inherently at basic pH.

To overcome the challenges associated with the co-delivery of AuNPs (gold nanoparticles) and miRNA as an anti-breast cancer combination therapy, niosomal systems were developed using Span 60, cholesterol, and a cationic lipid (CTAB), and the formulations were optimized using Box-Behnken experimental design. The niosomal formulations with the smallest size were selected for further optimization of size, surface charge, entrapment efficiency, and stability. To achieve this, AuNPs and DSPE-PEG2000 (2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino(polyethylene glycol)-2000)were added to the formulation. The optimized niosomal formulation could effectively encapsulate AuNPs with an entrapment efficiency of 34.49% ± 0.84 and a spherical particle size of 153.6 ± 4.62 nm. The incorporation of PEG and CTAB led to notable enhancements in the overall characteristics of the delivery system. To evaluate the effectiveness of the combination therapy, various assessments such as cytotoxicity, apoptosis, and gene expression properties were conducted. The results demonstrated that the combination delivery using the new C-PEG-Nio-AuNPs (cationic pegylated niosomal gold nanoparticles) system and miRNA had the lowest IC50, the highest apoptosis rate, and the most significant upregulation of miRNA and BAX/BCL2 expression in MCF-7 cell growth. In conclusion, this innovative co-delivery approach represents a promising breakthrough in the development of therapeutic agents for breast cancer treatment. By combining multiple therapeutic agents within a single delivery system, this method has the potential to enhance treatment efficacy, reduce side effects, and improve patient outcomes., (© 2024. The Author(s).)

Aromatic residues can participate in various biomolecular interactions, such as π-π, cation-π, and CH-π interactions, which are essential for protein structure and function. Here, we re-evaluate the geometry and energetics of these interactions using quantum mechanical (QM) calculations, focusing on pairwise interactions involving the aromatic amino acids Phe, Tyr, and Trp and the cationic amino acids Arg and Lys. Our findings reveal that π-π interactions, while energetically favorable, are less abundant in structured proteins than commonly assumed and are often overshadowed by previously underappreciated, yet prevalent, CH-π interactions. Cation-π interactions, particularly those involving Arg, show strong binding energies and a specific geometric preference toward stacked conformations, despite the global QM minimum, suggesting that a rather perpendicular T-shape conformation should be more favorable. Our results support a more nuanced understanding of protein stabilization via interactions involving aromatic residues. On the one hand, our results challenge the traditional emphasis on π-π interactions in structured proteins by showing that CH-π and cation-π interactions contribute significantly to their structure. On the other hand, π-π interactions appear to be key stabilizers in solvated regions and thus may be particularly important to the stabilization of intrinsically disordered proteins.

Poly(ADP-ribose) (PAR), a non-canonical nucleic acid, is essential for DNA/RNA metabolism and protein condensation, and its dysregulation is linked to cancer and neurodegeneration. However, key structural insights into PAR's functions remain largely uncharacterized, hindered by the challenges in synthesizing and characterizing PAR, which are attributed to its length heterogeneity. A central issue is how PAR, comprised solely of ADP-ribose units, attains specificity in its binding and condensing proteins based on chain length. Here, we integrate molecular dynamics simulations with small-angle X-ray scattering to analyze PAR structures. We identify diverse structural ensembles of PAR that fall into distinct subclasses and reveal distinct compaction of two different lengths of PAR upon the addition of small amounts of Mg 2+ ions. Unlike PAR 15 , PAR 22 forms ADP-ribose bundles via local intramolecular coil-to-globule transitions. Understanding these length-dependent structural changes could be central to deciphering the specific biological functions of PAR., (© 2024. The Author(s).)

Synovial fluid lubricates articular joints by forming a hydrated layer between the cartilage surfaces. In degenerative joint diseases like osteoarthritis (OA), the synovial fluid is compromised, which leads to less effective innate lubrication and exacerbated cartilage degeneration. Studies over the years have led to the development of partially or fully synthetic biolubricants to reduce the coefficient of friction with cartilage in knee joints. Cartilage-adhering, hydrated lubricants are particularly important to provide cartilage lubrication and chondroprotection under high normal load and slow speed. Here, we report the development of a hyaluronic acid (HA)-based lubricant functionalized with cationic branched poly-L-lysine (BPL) molecules that bind to cartilage  via  electrostatic interactions. We surmised that the electrostatic interactions between the BPL-modified HA molecules (HA-BPL) and the cartilage facilitate localization of the HA molecules to the cartilage surface. The number of BPL molecules on the HA backbone was varied to determine the optimal grafting density for cartilage binding and HA localization. Collectively, our results show that our HA-BPL molecules adhered readily to cartilage and were effective as a lubricant in cartilage-on-cartilage shear measurements where the modified HA molecules significantly reduce the coefficient of friction compared to phosphate-buffered saline or HA alone. This proof-of-concept study shows how the incorporation of cartilage adhering moieties, such as cationic molecules, can be used to enhance cartilage binding and lubrication properties of HA.

Sacran is a cyanobacterial supergiant polysaccharide with carboxylate and sulfate groups that exhibits antiallergic and antiinflammatory properties. However, its high anionic functions restrict cell compatibility. Quaternary ammonium groups were substituted to form sacran ampholytes, and the cell compatibility of the cationized sacran hydrogels was evaluated. The cationization process involved the reaction of N -(3-chloro-2-hydroxypropyl)trimethylammonium chloride with the primary amine or hydroxyl groups of sacran. The degree of cationization ranged from 32 to 87% for sugar residues. Hydrogels of sacran ampholytes were prepared by annealing their dried sheets by thermal cross-linking; these hydrogels exhibited anisotropic expansion properties. The water contact angle on the hydrogels decreased from 26.5 to 15.3° with an increase in the degree of cationization, thereby enhancing hydrophilicity. The IC 50 values of sacran ampholytes decreased with an increased degree of cationization, resulting in a reduction in cytotoxicity toward the L-929 mouse fibroblast cell line. This reduction was associated with an increase in the cell proliferation density after 3 days of incubation. Scanning electron microscopy images showed fibroblast intercellular connections. Therefore, the sacran ampholyte hydrogel exhibited increased hydrophilicity and cell compatibility, which is beneficial for various biomedical applications.

Synthesis of an antigenic tetrasaccharide repeating unit of the O -polysaccharide of Salmonella enteritidis lipopolysaccharide has been accomplished. Those four monosaccharides were assembled stereoselectively by employing our recently developed cationic gold(I)-catalyzed glycosylation methodology involving various glycosyl N -1,1-dimethylpropargyl carbamate donors. The newly formed α-anomeric stereochemical configuration was controlled by the axial C2-OBz of the glycosyl donors via anchimeric assistance.

This review provides an in-depth examination of recent progress in the development of chemosensors, with a particular emphasis on colorimetric and fluorescent probes. It systematically explores various sensing mechanisms, including metal-to-ligand charge transfer (MLCT), ligand-to-metal charge transfer (LMCT), photoinduced electron transfer (PET), intramolecular charge transfer (ICT), and fluorescence resonance energy transfer (FRET), and elucidates the mechanism of action for cation and anion chemosensors. Special attention is given to phenothiazine-based fluorescence probes, highlighting their exceptional sensitivity and rapid detection abilities for a broad spectrum of analytes, including cations, anions, and small molecules. Phenothiazine chemosensors have emerged as versatile tools widely employed in a multitude of applications, spanning environmental and biomedical fields. Furthermore, it addresses existing challenges and offers insights into future research directions, aiming to facilitate the continued advancement of phenothiazine-based fluorescent probes., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

A variety of ionizable and cationic lipids have been synthesized as precursors for nanoparticle carriers. However, the laborious synthetic routes in batch reactors often involve the use of toxic and carcinogenic agents, as well as challenge of removing gaseous byproducts. In this study, we present facile one-flow micro-reaction process that enables the synthesis of 11 ionizable lipids as well as 7 cationic lipids, including the well-known DODAP and DOTAP. These lipids can be scaled up to produce approximately ∼10g/h by using a straightforward size-up approach. The development of the lipid library was involved generating highly moisture-sensitive acyl chloride at 25 °C for 1.5 min. The toxic byproducts such as HCl, CO 2 and CO were subsequently removed using a liquid-gas separator. The esterification with dimethylamino-1,2-diol at 25 °C for 3 min, monitored in-line with FTIR, completed the process. Additionally, the synthesized ionizable lipids were converted to cationic lipids with methyl sulfate, chloride ions via dimethyl sulfate and Steglich esterification in a continuous flow system. Finally, the produced DODAP was transformed into a uniform-sized LNPs (64 nm, PDI 0.07) and liposomal nanoparticles (72 nm, PDI 0.05) while DOTAP was converted to liposomes (55 nm, PDI 0.08) using a custom micro-mixer. This efficient platform for lipid synthesis significantly contributes to the practical applications of lipid-based nanomedicines., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Multiply charged ions produced by electrospray ionization (ESI) of heterogeneous mixtures of macromolecular analytes under native conditions are typically confined to relatively narrow ranges of mass-to-charge ( m / z ) ratio, often with extensive overlap. This scenario makes charge and mass assignments extremely challenging, particularly when individual charge states are unresolved. An ion/ion reaction strategy involving multiply charged ion attachment (MIA) to the mixture components in a narrow range of m / z can facilitate charge and mass assignment. In MIA operation, multiply charged reagent ions are attached to the analyte ions of opposite polarity to provide large m / z displacements resulting from both large changes in mass and charge. However, charge reduction of the high m / z ions initially generated under native ESI conditions requires the ability to isolate high m / z ions and to analyze even higher m / z product ions. Digital ion trap (DIT) operation offers means for both high m / z ion isolation and high m / z mass analysis, in addition to providing conditions for the reaction of oppositely charged ions. The feasibility of conducting MIA experiments in a DIT that takes advantage of high m / z ion operation is demonstrated here using a tandem 2D-3D DIT instrument. Proof-of-concept MIA experiments with cations derived from β-galactosidase using the 20- charge state of human serum immunoglobulin G (IgG, ∼149 kDa) as the reagent anion are described. MIA experiments involving mixtures of ions derived from the E. coli. ribosome are also described. For example, three components in a mixture of 70S particles (>2.2 MDa) were resolved and assigned with masses and charges following an MIA experiment involving the 20- charge state of human serum IgG.

Infection control measures to prevent viral and bacterial infection spread are critical to maintaining a healthy environment. Pathogens such as viruses and pyogenic bacteria can cause infectious complications. Viruses such as SARS-CoV-2 are known to spread through the aerosol route and on fomite surfaces, lasting for a prolonged time in the environment. Developing technologies to mitigate the spread of pathogens through airborne routes and on surfaces is critical, especially for patients at high risk for infectious complications. Multifunctional coatings with a broad capacity to bind pathogens that result in inactivation can disrupt infectious spread through aerosol and inanimate surface spread. This study uses C-POLAR, a proprietary cationic, polyamine, organic polymer with a charged, dielectric property coated onto air filtration material and textiles. Using both SARS-CoV-2 live viral particles and bovine coronavirus models, C-POLAR-treated material shows a dramatic 2-log reduction in circulating viral inoculum. This reduction is consistent in a static room model, indicating simple airflow through a static C-POLAR hanging can capture significant airborne particles. Finally, Gram-positive and Gram-negative bacteria are applied to C-POLAR textiles using a viability indicator to demonstrate eradication on fomite surfaces. These data suggest that a cationic polymer surface can capture and eradicate human pathogens, potentially interrupting the infectious spread for a more resilient environment., Importance: Infection control is critical for maintaining a healthy home, work, and hospital environment. We test a cationic polymer capable of capturing and eradicating viral and bacterial pathogens by applying the polymer to the air filtration material and textiles. The data suggest that the simple addition of cationic material can result in the improvement of an infectious resilient environment against viral and bacterial pathogens., Competing Interests: The authors declare no conflict of interest.

Studying the adsorption behavior of cationic surfactants can help to develop more effective strategies to limit their dispersion in the environment. However, there have few studies on the adsorption of cationic surfactants from the perspective of critical micelle concentration (CMC). In this study, with cetyltrimethylammonium bromide (CTAB) and octadecyl trimethylammonium bromide (OTAB) serving as the model cationic surfactants, the effect of CMC on the adsorption behavior of cationic surfactant onto the surface of sodium alginate/silica (SA/SiO 2 ) microspheres was systematically revealed. The adsorption mechanism relative to CMC was investigated under different conditions, including surfactant concentration, pH, temperature, and adsorption time. The results suggest that at identical concentrations, the smaller the CMC value of the cationic surfactants, the greater the adsorption amount (q t ). q t for CTAB and OTAB were 583.2 and 678.0 mg/g respectively, with the concentration higher than their CMC value. When the concentration was lower than the CMC value of the cationic surfactants, q t for CTAB and OTAB were 123.2 and 138.7 mg/g, respectively. The CMC value of CTAB was lower than that of OTAB under identical conditions, suggesting that the adsorption of cationic surfactants is related to their CMC. These results are beneficial for the removal of cationic surfactants by adsorption methods., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)