Search

Remarkably simple Ir-III catalysts enable the isomerization of primary and sec-allylic alcohols under very mild reaction conditions. X-ray absorption spectroscopy (XAS) and mass spectrometry (MS) studies indicate that the catalysts, with the general formula [Cp*Ir-III], require a halide ligand for catalytic activity, but no additives or additional ligands are needed.

A directed heterogeneous C−H activation/halogenation reaction catalyzed by readily synthesized Pd@MOF nanocatalysts was developed. The heterogeneous Pd catalysts used were a novel and environmentally benign Fe-based metal–organic framework (MOF) (Pd@MIL-88B-NH2(Fe)) and the previously developed Pd@MIL-101-NH2(Cr). Very high conversions and selectivities were achieved under very mild reaction conditions and in short reaction times. A wide variety of directing groups, halogen sources, and substitution patterns were well tolerated, and valuable polyhalogenated compounds were synthesized in a controlled manner. The synthesis of the Pd-functionalized Fe-based MOF and the recyclability of the two catalysts are also presented.

The chemical stability of metal-organic frameworks (MOFs) is a major factor preventing their use in industrial processes. Herein, it is shown that judicious choice of the base for the Suzuki-Miyaura cross-coupling reaction can avoid decomposition of the MOF catalyst Pd@MIL-101-NH2(Cr). Four bases were compared for the reaction: K2CO3, KF, Cs2CO3 and CsF. The carbonates were the most active and achieved excellent yields in shorter reaction times than the fluorides. However, powder XRD and N-2 sorption measurements showed that the MOF catalyst was degraded when carbonates were used but remained crystalline and porous with the fluorides. XANES measurements revealed that the trimeric chromium cluster of Pd@MIL-101-NH2(Cr) is still present in the degraded MOF. In addition, the different countercations of the base significantly affected the catalytic activity of the material. TEM revealed that after several catalytic runs many of the Pd nanoparticles (NPs) had migrated to the external surface of the MOF particles and formed larger aggregates. The Pd NPs were larger after catalysis with caesium bases compared to potassium bases.

A new iridium N-heterocyclic carbene (NHC) metallolinker has been synthesised and introduced into a metal-organic framework (MOF), for the first time, via two different routes: direct synthesis and postsynthetic exchange (PSE). The two materials were compared in terms of the Ir loading and distribution using X-ray energy dispersive spectroscopy (EDS), the local Ir structure using X-ray absorption spectroscopy (XAS) and the catalytic activity. The materials showed good activity and recyclability as catalysts for the isomerisation of an allylic alcohol.

Stable and easily synthesized metal-organic framework MIL-88B-NH2 represents an attractive support for catalysts employed in oxidation reactions, which are typically performed under relatively harsh conditions. However, MIL-88B-NH2, the thermodynamic polymorph of the more popular MIL-101-NH2, has been rarely employed in catalytic applications because of a difficult impregnation process caused by the flexible nature of the framework. We report herein a new catalyst denoted Pd@MIL-88B-NH2 (8 wt % Pd), the first example of metallic nanoparticles successfully impregnated in the pores of MIL-88B-NH2. Furthermore, by enclosing the MOF crystals in a tailored protective coating of SiO2 nanoparticles, an even more enduring material was developed and applied to the aerobic oxidation of benzylic alcohols. This doubly supported catalyst Pd@MIL-88B-NH2@nano-SiO2 displayed high activity and excellent performance in terms of endurance and leaching control. Under batch conditions, a very convenient and efficient recycling protocol is illustrated, using a teabag approach. Under continuous flow, the catalyst was capable of withstanding 7 days of continuous operation at 110 degrees C without deactivation. During this time, no leaching of metallic species was observed, and the material maintained its structural integrity., AuthorCount:10

Two families of metal organic frameworks (MOFs), MIL-88 and MIL-101 built by trinuclear transition metal (TM) clusters (TM = Cr, Fe, or Sc), have been known for several years, but their syntheses are often reported separately. In fact, these MOFs are polymorphs, or framework isomers: they are assembled from the same metal secondary building units and organic linkers, but the connectivity of these components differs. Here we report for the first time the synthesis of the vanadium MOF MIL-88B(V) and compare its synthesis parameters to those of MIL-47(V) and the recently reported MIL-101(V). The properties of MIL-88B(V) and MIL-101(V) are remarkably different. MIL-88B(V) can breathe and is responsive to different solvents, while MIL-101(V) is rigid and contains mesoporous cages. MIL-101(V) exhibits the highest specific surface area among vanadium MOFs discovered so far. In addition, both MIL-88B(V) and MIL-101(V) transform to MIL-47 at higher temperatures. We have also identified the key synthesis parameters that control the formation of MIL-88B(V), MIL-101(V), and MIL-47: temperature, time, and pH. This relates to the rate of reaction between the metal and linkers, which has been monitored by ex situ X-ray powder diffraction and V K-edge X-ray absorption spectroscopy during MOF synthesis. It is therefore important to fully study the synthesis conditions to improve our understanding of framework isomerism in MOFs., AuthorCount:7

A ruthenium trichloride complex has been loaded into an aluminium metalorganic framework (MOF), MOF-253, by post-synthetic modification to give MOF-253-Ru. MOF-253 contains open bipyridine sites that are available to bind with the ruthenium complex. MOF-253-Ru was characterised by elemental analysis, N2 sorption and X-ray powder diffraction. This is the first time that a Ru complex has been coordinated to a MOF through post-synthetic modification and used as a heterogeneous catalyst. MOF-253-Ru catalysed the oxidation of primary and secondary alcohols, including allylic alcohols, with PhI(OAc)2 as the oxidant under very mild reaction conditions (ambient temperature to 40 degrees C). High conversions (up to >99%) were achieved in short reaction times (13 h) by using low catalyst loadings (0.5 mol% Ru). In addition, high selectivities (>90%) for aldehydes were obtained at room temperature. MOF-253-Ru can be recycled up to six times with only a moderate decrease in substrate conversion., AuthorCount:7