Search

Background: Concomitant carpal injuries with dislocations and fracture-dislocations of the carpometacarpal joints (CMCD/FD) are often hard to see on plain radiographs, making advanced imaging a useful diagnostic adjunct. We aim to: (1) characterize bony injury patterns with CMCD/FD; and (2) determine the frequency that preoperative computed tomography (CT) scans change surgical management., Methods: A retrospective review was performed of patients who underwent operative fixation of CMCD/FD from 2006 to 2021. X-ray and CT scan diagnoses were reviewed and correlated to intraoperative findings and procedures performed. Statistical analyses were performed to evaluate the frequency in which CT scans changed management and the frequency of new intraoperative diagnoses., Results: Seventy-five patients were identified. All patients had a preoperative x-ray, and 27 patients (36%) additionally had a CT scan. Patients who sustained high-velocity trauma were significantly more likely to obtain a CT scan than patients with low-velocity trauma ( P = .019); however, the number of additional diagnoses was not significantly associated with trauma velocity ( P = .35). Computed tomography scans significantly increased the number of diagnoses ( P < .001) and changed operative management in 58% of cases. Six of the 48 patients (12.5%) that did not receive a CT scan had new intraoperative diagnoses, which changed the procedure for five of these patients. New intraoperative diagnoses were identified significantly more when patients did not have a CT scan ( P = .04)., Conclusions: Obtaining a CT scan in CMCD/FD patients changed the patient's diagnosis at a significant rate and changed operative management roughly half of the time. The authors recommend routine CT scans be obtained in patients with CMCD/FD., Competing Interests: Declaration of Conflicting InterestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Background: We present a case series of high-level baseball players having sustained a rare, isolated injury to the fourth carpometacarpal joint of the nondominant or bottom hand during a jammed swing., Methods: Ten patients were evaluated for ulnar-sided wrist pain and were subsequently diagnosed with fourth carpometacarpal joint synovitis based on physical examination and magnetic resonance imaging revealing increased signal intensity within the joint., Results: Conservative treatment modalities including rest, nonsteroidal anti-inflammatory medications, splinting, and corticosteroid injections resulted in return to play within 4 weeks for all patients., Conclusions: We propose a mechanism of injury involving the bottom hand in relative pronation receiving a dorsally directed force from bat during a jammed swing resulting in isolated injury to the fourth carpometacarpal joint. This report serves to highlight this rare injury in high-level baseball players and recommend a treatment algorithm for early return to play., Competing Interests: Declaration of Conflicting InterestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Background: Bennett's fracture, a fracture-dislocation of the base of the first metacarpal, poses significant challenges due to the unique biomechanics of the thumb's carpometacarpal (CMC) joint. Effective management is critical to restoring thumb function and preventing long-term complications such as arthritis and instability., Objective: This article provides a comprehensive overview of Bennett's fracture, including its mechanism of injury, diagnostic considerations, and management strategies, with a focus on conservative and surgical options., Methods: A detailed review of the current literature was conducted to outline the principles and techniques of closed reduction with percutaneous pinning (CRPP), open reduction and internal fixation (ORIF), and emerging methods such as arthroscopic-assisted fixation., Results: Conservative management is appropriate for minimally displaced fractures but is often inadequate for displaced injuries due to persistent muscle forces acting on the metacarpal. CRPP offers a minimally invasive option for fractures with moderate displacement, while ORIF provides superior stability for complex fractures. Emerging techniques, including arthroscopy and bioabsorbable implants, show promise in minimizing complications and improving outcomes., Conclusion: The management of Bennett's fractures requires a tailored approach based on fracture displacement, patient needs, and surgeon expertise. Timely diagnosis, appropriate treatment selection, and structured rehabilitation are essential for optimal recovery. Advances in imaging, surgical methods, and materials hold the potential to further refine treatment strategies and improve long-term outcomes.

We present two cases of isolated post-traumatic osteoarthritis in the middle carpometacarpal joint., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

We present a case of fracture of the polyethylene liner of a dual-mobility trapeziometacarpal total joint arthroplasty. Standard radiographic imaging was normal. This case highlights the importance of dynamic radiographic imaging to make a timely diagnosis., Competing Interests: Declaration of conflicting interestsThe authors disclosed receipt of the following potential conflicts of interest with respect to the research, authorship, and/or publication of this article: JD is a consultant for Keri Medical for teaching activities.

Dislocations of the fourth and fifth carpometacarpal joints (CMCJs) are rare and often misdiagnosed via radiography. Moreover, treatment strategies have not yet been standardized. Herein, we report a case of chronic dislocations of the fourth and fifth CMCJs with delayed diagnosis and successful treatment via ligament repair. A 29-year-old male patient who was initially diagnosed with contusion at another center following a fall on the stairs was referred to our hospital one month later due to persistent pain and swelling. Fourth and fifth CMCJ dislocations were diagnosed using radiography and computed tomography. Closed reduction attempts were unsuccessful, prompting open reduction. The operative findings included rupture of the dorsal carpometacarpal ligament and hamate cartilage injury. Using two mini anchors, the fourth and fifth dorsal carpometacarpal ligaments were repaired, and Kirschner-wire (K-wire) pinning was performed. The K-wire was extracted after four weeks. At the eight-month follow-up, the only remaining symptom was mild discomfort, and the range of motion and grip strength was fully recovered. Our findings highlight the difficulties in diagnosing CMCJ dislocation and suggest ligament repair as a treatment option for chronic cases of CMCJ dislocation.

Traumatic dislocations of the fourth and fifth metacarpals, in conjunction with dorsal hamate fractures, are a common entity that can lead to the instability of the fourth and fifth carpometacarpal (CMC) joints. The fracture of the hamate, usually in a coronal dorsal shear configuration, can lead to the dorsal subluxation of the hamatometacarpal joint. Open reduction and internal fixation of the hamate bone with a dorsally applied buttress plate can re-establish a stable and congruent joint surface and anatomically align the articular surfaces of the small and ring finger CMC joints. We present a technique of internal fixation of the hamate to facilitate the reduction of the hamatometacarpal joints. Using a dorsal approach centered over the fourth and fifth CMC joints, the joint surfaces are directly visualized and subsequent fixation of the hamate is performed using a 1.3-mm T-plate to securely buttress its articular surface. This technique presents an approach to the multifaceted injury pattern of fourth and fifth CMC dislocations associated with a hamate fracture., Competing Interests: Conflicts of Interest and Sources of Funding: The authors report no conflicts of interest and no sources of funding., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Punching injuries to the hand are frequent and can result in fourth and fifth carpometacarpal (CMC) fracture-dislocations. Fourth and fifth CMC fracture-dislocations are unstable, and dorsal metacarpal dislocations are most common. Operative management for maintaining reduction of the unstable fracture-dislocation was closed reduction and percutaneous pinning; however, in delayed fractures, open reduction is necessary. We report on a plating technique used for acute and delayed, unstable fourth and/or fifth CMC fracture-dislocations. This method of plating is novel and allows for physiological motion at the CMC joint through a dorsal buttressing mechanism while maintaining joint reduction. The range of motion begins within the first week postoperatively, and full composite fist formation and digital extension occur 4 to 6 weeks postoperatively. This novel technique affords an alternative effective surgical treatment option with excellent outcomes for patients presenting with fourth and fifth CMC fracture-dislocations up to 12 weeks following the injury., Competing Interests: Conflicts of Interest and Source of Funding: The authors report no conflicts of interest and no source of funding., (Copyright © 2023 Wolters Kluwer Health, Inc. All rights reserved.)

Carpometacarpal joint dislocations represent not more than 1% of all hand injuries due to stable joint structures and high-energy trauma mechanism. Unfortunately, there are many missed cases suffering from ongoing pain and loss of function because of difficulty in diagnosis. Here we present a case of a healthy 42-year male who presented to the emergency department with hand pain after a punch injury. On physical examination, painful swelling at the dorsal side of his right hand was noted. His radiographic images showed dorsal dislocation of fourth and fifth carpometacarpal joints, and the dislocations were reduced to the anatomical position by the emergency physician without any complication. In the case of carpometacarpal joint fracture or dislocations, early diagnosis and reduction are the most critical steps to avoid severe morbidity, and it is only possible with careful evaluation of physical and radiological findings. In conclusion, as seen in our case, emergency physicians should remain vigilant in the diagnosis and treatment of rare traumatic injuries. Key Words: Carpometacarpal joints, Dislocation, Hand injury, Pain.

Isolated dislocations of thumb CMC joints are rare injuries with serious functional implications. Patients suffering these injuries will have decreased pinch and grip strength. A high-energy, axially directed force on a flexed thumb typically causes dislocation. Chronically dislocated thumb CMC joints may be due to untreated remote trauma, hypermobility, or connective tissue disorders. Roberts and CMC stress view radiographs help identify joint dislocations. Treatment of these injuries includes closed reduction and immobilization, percutaneous pinning, open reduction with direct repair, and ligament reconstruction. Timely identification, timely treatment, and proper hand therapy often lead to adequate joint stability with minimal residual pain., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Background: Ulnar metacarpal base fractures can destabilize the carpometacarpal (CMC) joint, prompting surgical stabilization. Studies investigating this injury are limited by small case volumes. Our purpose is to review the surgical techniques, outcomes, and complications of ulnar CMC joint stabilization., Methods: A literature search was performed of all articles published on the surgical treatment and outcomes of ulnar CMC fracture dislocations using PubMed and Google Scholar databases between the years 2014 and 2019. Data were pooled and analyzed, assessing surgical techniques and hand outcome measures: union, recurrent dislocations, range of motion, grip strength, and complications., Results: Six studies met inclusion criteria. All surgical patients, regardless of technique, went on to union with no incidents of recurrent instability. Grip strength was significantly decreased postoperatively (82.7% of uninjured side). Patients with CMC dislocations of both the fourth and fifth ray had similar postoperative outcomes to those with CMC dislocations of the fifth ray alone. One third of plate and screw constructs required plate removal, due to breakage (2) or implant-related pain (4). Plate-related symptoms resolved after removal in all cases. Delayed treatment decreased the effectiveness of nonoperative treatment, and increased the likelihood of postoperative pain, chronic deformity, malunion, and CMC osteoarthritis., Conclusions: Closed reduction percutaneous pinning, open reduction percutaneous pinning, and open reduction internal fixation with CMC joint bridging or dorsal buttress plating are all well described, safe techniques with low complication rates. Early, accurate diagnosis of fourth and fifth CMC joint fracture-dislocations is crucial for optimizing hand function and postoperative outcomes.

Multiple dorsal fracture-dislocations of the carpometacarpal joints (CMCJ) occur from very high-energy trauma and are often associated with soft tissue injury or ischaemia. We report a 54-year-old male manual worker and a smoker who presented to the emergency room with history of compression of his right hand in a press machine. Radiographs showed dorsal fracture-dislocations of the scapho-trapezio-trapezoidal and third to fifth CMCJ's. Despite emergent Guyon canal and carpal tunnel release and closed reduction and pinning, skin pallor persisted in all digits. Brachial angiography revealed total occlusion of the radial and ulnar arteries and loss of the palmar arch at the level of the fracture. Heparin and Alprostadil were injected directly. On follow-up angiography three weeks later, the vessels were still occluded and collaterals provided digital circulation. Although digital sensations recovered, cold intolerance and stiffness resulted in a poor functional outcome. Level of Evidence: Level V (Therapeutic).

Volar dislocation of the trapezoid is a rare injury and is easily missed. It is more common to have a dorsal dislocation of trapezoid or multiple carpometacarpal joint dislocations. The rare nature of the injury also means that there is little guidance in literature regarding optimal treatment. We are reporting the presentation, management and a 3-year follow-up of this rare injury in a 19-year-old male. Level of Evidence: Level V (Therapeutic).

Competing Interests: Competing interests: None declared.

Objective: Complex base fractures of the fifth metacarpal bone and dislocation of the fifth carpometacarpal joint are more prone to internal rotation deformity of the little finger sequence after fixation with a transarticular plate. In the past, we have neglected that there is actually a certain angle of external rotation in the hamate surface of transarticular fixation. This study measured the inclination angle of the hamate surface relative to the fifth metacarpal surface for clinical reference., Methods: In a prospective single-center study, we investigated the tilt angle of 60 normal hamates. The study included thin-layer computed tomography (CT) data from 60 patients from the orthopaedic clinic and inpatient unit from January 2017 to March 2020, including 34 men and 26 women who were 15~59 years old, average 35 years old. The CT data of 60 cases in Dicom format of the hand was input into Mimics and 3-Matics software for three-dimensional (3D) reconstruction and measuring the angle α between hamate surface and the fifth metacarpal surface. According to the possible placement of the transarticular plate on the fifth metacarpal surface, we measured the angle β between the hamate surface 1 and the fifth metacarpal surface and the angle γ between the hamate surface 2 and the fifth metacarpal surface., Results: The average angle between the hamate surface and the fifth metacarpal surface was 11.66°. The hamate surfaces 1 and 2 have an external rotation angle of 7.30° and 7.51° on average with respect to the fifth metacarpal surface, respectively. There is no statistically significant difference in the angles between the two groups (P > 0.05)., Conclusions: The horizontal angle of the dorsal side of the hamate is different from the back of the fifth metacarpal surface, and the hamate has a certain external rotation angle with respect to the fifth metacarpal surface. No matter how the transarticular plate is placed, the plate always has a certain external rotation angle relative to the fifth metacarpal surface. When the fixation is across the fifth carpometacarpal joint, if the plate does not twist and shape, it will inevitably cause internal rotation of the fifth metacarpal, resulting in internal rotation deformity of the little finger sequence., (© 2021 The Authors. Orthopaedic Surgery published by Chinese Orthopaedic Association and John Wiley & Sons Australia, Ltd.)

Isolated palmar dislocation of the 5 th carpometacarpal joint (CMCJ) is a rare injury that can be easily missed and requires a high index of suspicion to detect. We report a case of an initially missed isolated ulnopalmar dislocation of the 5 th CMCJ and a summary of other published case reports comparing methods of fixation and outcomes. We conclude that a delay in diagnosis will significantly reduce the chances of successfully managing this injury via closed reduction.

Case: We present a rare combined convergent-divergent carpometacarpal (CMC) fracture dislocation with median nerve involvement in a young adult after a motorbike accident. Radiographs revealed a volar dislocation of the second and fifth metacarpals and dorsal dislocation of the third and fourth metacarpals with bases of the second and fifth metacarpals found to be converging in the coronal plane. Open reduction and fixation was performed with carpal tunnel release., Conclusion: Combined convergent-divergent CMC fracture dislocation should be kept as a differential while evaluating CMC dislocations. Metacarpal cascade line (posteroanterior view) and 2 lateral views (radial side up and ulnar side up) with computed tomography scan (3-dimensional reconstruction) prove to be vital in such high-energy trauma.

Case: Coronal shear fractures of the hamate are relatively rare injuries. Surgical intervention is recommended for displaced fractures. However, there is no established surgical procedure for the displaced coronal shear fractures of the hamate. Therefore, we present 2 cases of the displaced coronal hamate fracture with metacarpal dislocations, which were successfully managed with open reduction and internal fixation, using the headless compression screw by the 2-directional approach., Conclusion: Our procedure ensured that the screw's distal end captured the hamate hook, and the displaced bone fragments were reduced considerably in both cases.

Bennett's fractures are the most common fractures around the trapeziometacarpal joint but require specialized radiographs to be correctly diagnosed. If a fracture is missed at initial presentation, it may heal with an intra-articular gap, leading to joint incongruency and a painful trapeziometacarpal joint. We present a new technique to correct the intra-articular gap and restore joint congruency in the event of a symptomatic Bennett malunion with a gap of at least 2 mm. The joint is exposed through an anterolateral approach, and the malunion is marked with K-wires under fluoroscopic control. A closing wedge osteotomy with excision of the malunion site is then performed to restore joint congruency. The osteotomy is fixed with 3 interfragmentary screws, and the joint is immobilized for 2 weeks before passive mobilization is initiated. Hardware can be removed between 3 and 6 months postoperatively after consolidation of the osteotomy. We recommend this technique in active patients without trapeziometacarpal osteoarthritis who present with a painful Bennett malunion. Restoration of the joint congruency reduces pain and may prevent the development of posttraumatic osteoarthritis.

Ulnar-sided carpometacarpal (CMC) joint fracture dislocations are relatively uncommon, frequently associated with fractures of the metacarpal base and/or hamate, and often sustained by young male individuals secondary to striking a hard object. The complexity of ulnar-sided CMC fracture dislocations necessitates careful restitution of anatomic alignment and joint congruency for mobility and stability. Miniaturization of the external fixation device has allowed application to the hand. Spanning external fixation utilizes the principles of "ligamentotaxis"-indirect reduction through distraction forces of capsule-ligamentous structures. Treatment options for ulnar-sided CMC fracture dislocations are varied. Our surgical technique involving an external fixation device is reviewed. Clinical and chart review was performed on the last 10 patients undergoing acute surgical repair of ulnar-sided CMC fracture dislocations with intra-articular comminution by the senior author. Surgical technique used percutaneous Kirschner wire fixation and a spanning, miniature, external fixation device. Minimal follow-up was 1 year. Radiographs from the most recent appointment were evaluated by 2 independent reviewers. Patients rated their level of pain and assessed function using a subjective outcome instrument. Mean total active motion, when comparing traumatized digit to same digit in contralateral hand, was 100%. All fractures healed primarily with maintenance of congruent joint space and without radiographic displacement or arthrosis. Patient satisfaction was high and all patients returned to preinjury level of function. Our study demonstrates the use of an external fixation device in the management of ulnar-sided CMC fracture dislocations to be effective in reestablishing and maintaining normal hand anatomy, reducing pain, increasing function, and preserving motion.

Aim: This study reviews the surgical outcomes of using dorsal buttress plate for open reduction and internal fixation of ulnar (5th, or 4th and 5th) CMCJ fracture subluxation or dislocations., Methods: A retrospective review of 11 patients at our center who underwent operative fixation with dorsal buttress plating technique was performed. The surgery was performed between February 2012 and March 2017. Outcome measurements include radiographic evaluation of time to union, grip strength, and range of motion of the wrist., Results: Of 11 patients in our case series, eight had injuries involving both 4th and 5th CMCJs, while three had isolated involvement of 5th CMCJ. Mean time to union on radiographs was 48 days (IQR 17.0; range 30-88). The median palmar flexion and dorsiflexion of the wrist were 56° (IQR 11.3; range 50°-80°) and 65° (IQR 10.0; range 60°-80°) respectively. Patients regained a median of 79% of grip strength (IQR: 36.0, range 43-100). All fingers achieved full range of motion, and no patient had scissoring of the fingers. Two patients had temporary mild numbness over the dorsoulnar aspect of the hand in the region of the 4th webspace. Five patients underwent removal of implants due to plate breakage (n = 2), or mild pain or pain with cold (n = 3). All patients were well after plate removal, and all the patients with pain had resolution of pain after implant removal., Conclusion: The dorsal buttress plate is a viable option for fixation of ulnar CMCJ fracture dislocations to allow early mobilization.

A 56-year-old man, right-hand-dominant office worker, complained of pain and swelling at the base of his right thumb after using his hand to press onto the front passenger seat during an emergency brake. X-ray showed a dorsal dislocation of the first carpometacarpal joint of his right hand. Closed reduction of the joint was performed. As there were no clinical signs of instability post-reduction and X-ray confirmed that the joint was congruent, the joint was immobilised in a thumb spica splint for 6 weeks. His pain subsided and the range of motion of his first carpometacarpal joint was full at 9 weeks post-injury. Two years after the injury, he was asymptomatic and X-ray revealed normal joint anatomy with no obvious subluxation or osteoarthritic change. For patients with first carpometacarpal joint dislocations, non-operative management with splinting is a good option if the joint is stable post-reduction., Competing Interests: Competing interests: None declared., (© BMJ Publishing Group Limited 2019. No commercial re-use. See rights and permissions. Published by BMJ.)

Fracture-dislocations of the fourth and fifth carpometacarpal (CMC) joints present a complex situation. Misdiagnosis and inadequate treatment may cause malunion and residual subluxation, which lead to painful arthritis and grip weakness. Open reduction along with internal fixation is the treatment of choice, but there is no consensus on an optimal treatment approach. We applied a novel surgical technique to treat a case of a fracture-dislocation of the fifth CMC joint with avulsion fracture of the hamate using a dorsal buttress plate between the hamate and the capitate. This method allowed for achieving rigid fixation without screw insertion across the bone fragments of the hamate. We could avoid the risk of unexpected fragmentation and unexpected damage to the volar neurovascular bundles around the hook of the hamate. Six months postoperatively, bone union was achieved and the reduction of the fourth and fifth CMC joints was maintained. Range of motion of the fourth and fifth CMC joints was almost equal to that on the contralateral side. Dorsal buttress plating between the hamate and the capitate could be an alternative technique for the treatment of fracture-dislocation of the fifth CMC joint with avulsion fracture of the hamate.

Purpose: Carpometacarpal (CMC) joint subluxations of the fifth finger are rare injuries and are notoriously difficult to diagnose due to severe swelling and overlapping of bones on radiographs. Various radiographic studies have been suggested to identify these injuries. We hypothesize that there will be no difference between various oblique radiographs for detection of a fifth finger CMC subluxation., Methods: Using 4 cadaveric specimens, we took radiographs at various angles (0°, 30°, 45°, and 60°) with the fifth metacarpal in anatomic position, subluxated 25% and 50% dorsally. Radiology and orthopedic residents, fellows, and attending physicians viewed each image to determine whether a subluxation was present. Data were analyzed using area under the receiver operating curve, sensitivity, and specificity., Results: A total of 36 responses were obtained from 9 radiologists (4 residents, 3 fellows, 2 attendings) and 27 orthopedic surgeons (16 residents, 8 fellows, 3 attendings). Radiographs taken at 60° were more sensitive and specific (Sn 85, Sp 60) than at 0° (Sn 64, Sp 33), 30° (Sn 84, Sp 47), or 45° (Sn 80, Sp 49). Area under the receiver operating curve was also higher for 60° (0.87) than 0° (0.59), 30° (0.75), and 45° (0.75)., Conclusions: Sensitivity, specificity, and area under the receiver operating curve were highest for 60° radiographs. We recommend obtaining radiographs of the hand in 60° of pronation from the lateral if there is suspicion for a fifth CMC subluxation or dislocation., Clinical Relevance: This study suggests a simple radiographic view to enhance the diagnosis of fifth CMC subluxations., (Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.)

Objective: To evaluate the effectiveness of open reduction and trans-carpometacarpal joint internal fixation with mini locked-plate for treatment of comminuted fracture of base of the fifth metacarpal., Methods: Between July 2015 and December 2017, 8 cases of comminuted fractures of base of the fifth metacarpals were treated with open reduction and trans-carpometacarpal joint internal fixation with mini locked-plate. There were 7 males and 1 female with an age of 19-45 years (mean, 32.5 years). The causes of injury included 2 cases of hitting hard objects while clenching fist, 6 cases of falling injury. There were 2 cases of subluxation of fifth carpal joints and 1 case of dislocation. The time from injury to operation was 1-5 days (mean, 3.5 days). The stability of fracture ends could not be maintained by preoperative evaluation without over articular fixation or short time over articular fixation. Postoperative complications and fracture healing were observed, and hand function was evaluated at last follow-up according to the total active motion (TAM) recommended by the Branch of Hand Surgery of Chinese Medicine Association., Results: All the incisions healed by first intention without complications such as wound infection, cutaneous necrosis, tendon or nerve injury. All the patients were followed up 6-18 months (mean, 12 months). All fractures healed with the healing time of 12-16 weeks (mean, 13 weeks). Within 4 months after operation, all patients were able to return to pre-injury job. At last follow-up, according to the TAM recommended by the Branch of Hand Surgery of Chinese Medicine Association, the results were excellent in 7 cases, good in 1 case, with the excellent and good rate of 100%., Conclusion: Applying of mini locked-plate for treatment of comminuted fractures of base of the fifth metacarpal, of which cannot obtain stable fixation through non-transarticular or short-time transarticular fixation, can achieve satisfactory functional results with very few complications through trans-carpometacarpal joint approach, thus the procedure can be used as an alternative operation scheme.

A case of an isolated volar dislocation of the second and third carpometacarpal (CMC) joints in an 18-year-old man is described. He presented following a game of rugby unable to move his hand or wrist. He was managed by manipulation and K-Wire fixation. Hand function was excellent following wire removal and mobilization. This is an extremely rare injury, easily missed. The mechanism of injury described leads to comparison with the Lisfranc injury of the foot., (Crown Copyright © 2018. Published by Elsevier Masson SAS. All rights reserved.)

Thumb amputation at the carpometacarpal level is very incapacitating. Pollicization may be considered. We describe an alternate technique for thumb reconstruction at the level of the metacarpal base using a trimmed great toe along with a vascularized second metatarsophalangeal joint, including the second metatarsal, all supplied on a single vascular pedicle. Two patients who had a combined soft tissue defect and amputation of the thumb close to the carpometacarpal joint were reconstructed with this method. A transposition of the second toe was performed on top of the remaining proximal phalanx of the great toe to decrease donor site morbidity. This technique provides adequate length to the thumb without compromising another finger by creating a new thumb using a double microsurgical toe transfer on a single vascular pedicle. We minimize donor site morbidity by transposing the second toe onto the great toe., (Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.)

Case: We report a case of a chronic, irreducible carpometacarpal (CMC) dislocation of the thumb, which was managed with a trapeziometacarpal arthrodesis., Conclusion: This case demonstrates that arthrodesis is a suitable salvage procedure for chronic, irreducible CMC dislocations of the thumb.

Background: Divergent carpometacarpal joint dislocations of the fingers are very rare. Due to severe swelling and overlapping of bones on a radiograph of the wrist and hand, dislocations are missed. The purpose of this clinical case report is to highlight this unusual injury to avoid missing diagnosis., Case Presentation: We report a case of a 24-year-old Moroccan man, an athlete, who presented divergent carpometacarpal joint fracture-dislocations of the ulnar four fingers after a fall during a national cycling competition. Radiographs showed divergent dislocation and associated fractures. He underwent open reduction and fixation with percutaneous Kirschner wires followed by 6 weeks of immobilization. Active physiotherapy was started and the results were satisfactory after a 2-year follow-up., Conclusions: Divergent carpometacarpal joint dislocations of the fingers are exceptional; their diagnosis is sometimes difficult and may go unnoticed especially in a patient with polytrauma. The functional prognosis depends on the precocity of diagnosis and the quality of the reduction and rehabilitation.

Dislocations of the carpometacarpal (CMC) joints are uncommon and are frequently missed on standard radiographs of the hand. Dislocations could be dorsal or palmar; dorsal dislocations are seen more frequently. Palmar dislocations can be either ulnopalmar or radiopalmar. Stable CMC dislocations could be successfully treated conservatively, while unstable dislocations are mostly treated operatively. The purpose of this report is to present a patient with an isolated ulnopalmar dislocation of the fifth CMC joint, satisfactorily treated with closed reduction and casting., Competing Interests: Competing interests: None declared., (© BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.)

Background: Fourth and fifth carpometacarpal fracture-dislocations with unsatisfactory closed reduction commonly require later open reduction and internal fixation. However, the optimal method of internal fixation for these is unknown. The purpose of this study was to determine through objective clinical measures which method is superior for fourth and fifth carpometacarpal fracture-dislocations: a K-wire or a plate., Methods: We conducted a retrospective review of hospital records of patients who had received treatment for fourth and fifth carpometacarpal fracture-dislocations at one hospital between May 2007 and May 2015. A total of 86 patients who had received open reduction either with plate or K-wire fixation were included. Demographic and clinical characteristics of the two groups of patients were collected. Patients received standardised clinical tests one year after fixation. Clinical outcomes included tests of grip strength and scores on the Michigan Hand Outcomes Questionnaire and Disabilities of Arm, Shoulder, and Hand. Student's t tests and Chi-square tests were used to statistically evaluate whether plate or K-wire fixation was superior on the clinical variables., Results: The two groups were statistically indistinguishable on their demographic and clinical characteristics. Generally, the clinical outcomes of internal fixation were satisfactory. The average DASH and MHQ scores of the K-wire group were superior to those of the plate group (DASH 2.3 versus 9.8, P = 0.01; MHQ 96.7 versus 86.6, P = 0.02). Grip strength was not significantly different between the two groups (89.5 ± 5.8% versus 90.1 ± 4.9%, P = 0.36)., Conclusions: This non-randomly controlled, retrospective study suggests that clinical outcomes after K-wire fixation is superior to plate fixation for fourth and fifth carpometacarpal fracture-dislocations. This is especially the case for hand functions related to work. The present results suggest that K-wire fixation is the gold-standard technique for the treatment of fourth and fifth CMC fracture-dislocations., (Copyright © 2018 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.)

Objectives: This study aims to retrospectively evaluate and compare the mid-term clinical follow-up results of patients who were treated with open or closed reduction due to carpometacarpal (CMC) fracture dislocation., Patients and Methods: Medical charts of 15 patients (1 male, 14 females; mean age 32.5±10.5 years; range 18 to 55 years) who were operated for fourth and fifth finger CMC fracture dislocations were examined. Patients were divided into two groups according to applied treatment as closed reduction and percutaneous pinning (CRPP, n=6) and open reduction and percutaneous pinning (ORPP, n=9). Patients were assessed by a hand therapist blinded to the treatment groups. Patients were compared in respect of visual analog scale (VAS), Quick Disabilities of the Arm, Shoulder and Hand (Q-DASH) scores, and grip strength. Complications were recorded., Results: Mean VAS values of ORPP group and CRPP group were 2.33±0.50 and 1.67±0.52, respectively. Mean Q-DASH values of ORPP group and CRPP group were 13.63±3.21 and 9.05±2.36, respectively. Mean grip strength values of ORPP group and CRPP group were 65.78±3.70 and 75.17±6.11, respectively. Mean VAS and Q-DASH scores of ORPP group were statistically significantly higher compared to CRPP group. Mean grip strength value of CRPP group was statistically significantly higher compared to ORPP group., Conclusion: Treatment of fourth and fifth finger CMC fracture dislocations with CRPP results in statistically superior VAS, Q-DASH and grip strength values in the early post-injury period.

Bennett fracture is the most common fracture of the thumb. Choosing the appropriate approach to fracture fixation requires a thorough knowledge of the anatomy surrounding the first carpometacarpal joint, which is necessary to prevent injury to local sensory nerves and tendons. Although no study has shown superior outcomes compared with open reduction internal fixation and fluoroscopically guided closed reduction and percutaneous pinning, arthroscopic-assisted fixation allows for debridement of the carpometacarpal joint, direct visualization of the articular surface during reduction, and has minimal morbidity and associated complications., (Copyright © 2017 Elsevier Inc. All rights reserved.)

The long fingers' paddlefish carpometacarpal (CMC) dislocation is exceptional. Most dislocations occur after high energy trauma. Untreated, these lesions can result in chronic instability of the CMC joints and early osteoarthritis. We report the case of a 20-year-old patient presenting with an ulnar paddlefish CMC fracture-dislocation of the three lesser fingers resulting from a hand trauma in the context of an occupational accident. Treatment is usually surgical though no strict consensus can be found upon literature review. If diagnosed early and no associated fractures are found, CMC dislocation could benefit from conservative treatment.

Carpometacarpal (CMC) fracture-dislocations of the fifth ray are common. For chronic injuries, Dubert proposed combining resection arthroplasty of the base of the fifth metacarpal (M5) with synostosis with the fourth metacarpal (M4). Our aim was to evaluate the results of this procedure. Between 1994 and 2014, 7 men and 1 woman with an average age of 36 years (range, 27 to 45) were operated on. The right hand was involved in 6 of the 8 cases. All patients had symptomatic osteoarthritis secondary to isolated articular malunion and subluxation of the 5th CMC joint. Fusion was obtained right away in all 8 cases. Six patients were evaluated with a mean follow-up of 93 months (range, 7 to 249). At the final assessment, all patients reported a significant decrease in pain. The mean pain assessed by a visual analog scale (VAS) was 0.6/10 (range, 0 to 5). Range of motion in flexion-extension of the M4-M5 block ranged from 10° to 20°. Grip strength remained reduced by 15% to 70%. All patients except one were satisfied with the outcome. The technique described by Dubert is an effective method to relieve pain. By fusing together M5 and M4, it preserves the length of the fifth ray and a certain adaptability of the palm when gripping. However, it can be used only when the CMC joint of the 4th ray is healthy. This stabilized arthroplasty is an effective and reliable technique for the treatment of symptomatic osteoarthritis secondary to CMC fracture-dislocation of M5., (Copyright © 2017. Published by Elsevier Masson SAS.)

Competing Interests: Interessenkonflikt: Die Autoren geben an, dass kein Interessenkonflikt besteht.

Carpometacarpal fracture dislocations of the hand are a relatively uncommon injury. The injury is difficult to diagnose because of the gross swelling of the hand. The diagnosis of this unusual form of injury requires a high index of suspicion, vigilant examination and high-quality radiography. This article reports a case of young male grieved with dislocation of all carpometacarpal (CMC) joints due to motor vehicle collision. Standard radiographs and CT scan revealed dorsal dislocations of second to fourth CMC joints, volar fracture dislocation of fifth carpometacarpal joint, fracture dislocation of CMC joint of thumb and dorsal dislocation of the trapezoid. Patient was treated with closed manipulation and percutaneous pinning with multiple K - wires. Follow up radiographs showed adequate reduction and fracture union. Intensive postoperative physiotherapy is vital for achieving a good outcome.

Background: Dislocation of all 5 carpometacarpal (CMC) joints of a single hand is a rare injury., Methods: The literature regarding CMC fracture-dislocations was reviewed and a case was presented., Results: The relevant literature was consolidated to clinically relevant categories including 'Clinical Presentation and Diagnosis,' 'Management of CMC Fracture Dislocation and Hamate Fractures,' and 'Outcomes.', Conclusions: The mechanism associated with this injury is often high energy that causes multiple simultaneous life- or limb-threatening injuries that could distract the examiner from identifying this injury. The case we present involves an axial dislocation of the carpus that resulted in dorsal dislocations of all CMC joints, dislocation of the hamate-capitate articulation, as well as fractures of the first metacarpal and the hamate.

Background: The purpose of this investigation was to explore prospectively the nature and duration of hand and wrist injuries in training and competition in the Great Britain (GB) amateur boxing squad between 2005 and 2012. Methods: Longitudinal prospective injury surveillance of the GB boxing squad was performed from 2005 to 2012. The location, region affected, description, and the duration of each injury were recorded by the team doctor and team physiotherapist. We recorded whether the injury occurred during competition or training and also whether it was a new or a recurrent injury. The injury rate during competition was calculated as the number of injuries per 1000 hours. Results: Finger carpometacarpal instability and finger metacarpophalangeal joint extensor hood and capsule sprain also known as "boxer's knuckle" injuries were significantly more common than other injury diagnoses. The number of injuries during training or competition was similar, which is remarkable given the far greater number of training hours than competition hours performed. Injury rate for hand and wrist injuries in competition was 347 injuries per 1000 hours, while the estimated injury rate in training was <0.5 injuries per 1000 hours. Conclusion: Carpometacarpal instability and boxer's knuckle were more common than any other kind of hand and wrist injury in this cohort of elite amateur boxers. The rate of hand and wrist injuries was higher in competition than in training. Our study highlights the importance of hand and wrist injury prevention in the competition environment., Competing Interests: Declaration of Conflicting Interests: The authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Diagnosing ulnar-sided carpometacarpal joint dislocation is difficult, and more than half of injuries are missed on initial examination. The authors hypothesized that measuring the angle between the capitate and the metacarpals (capitate-metacarpal angle) on a plain radiograph would provide a simple, reliable tool to aid in the diagnosis of ulnar-sided carpometacarpal dislocation. This study retrospectively reviewed patients who underwent surgery for ulnar-sided carpometacarpal dislocation (study group). Two authors identified the contour of the capitate and the second, fourth, and fifth metacarpals on plain radiographs. The control group consisted of patients who had radiographs and no bony carpal or metacarpal pathology. Information on the contour of each bone was entered into MATLAB, version 8.5, software (MathWorks, Natick, Massachusetts), which calculated the 2-dimensional angles. A 3-dimensional model based on computed tomography scan data was used to obtain a "true lateral" image to account for variable rotation on plain radiographs. With the use of conventional lateral hand radiographs, the average capitate-metacarpal angle in the control group was 10° compared with 19° in the study group. Using a screening value of 15° on plain radiographs, the sensitivity of the capitate-metacarpal angle was 0.85 and the specificity was 0.79. Both 2-dimensional and 3-dimensional measurements showed that the angle between the capitate and the lesser metacarpals is a reliable screening tool for carpometacarpal dislocation. During evaluation of patients with posttraumatic hand pain, an increased capitate-metacarpal angle may indicate the need for advanced imaging studies to further evaluate the carpometacarpal joints. [Orthopedics. 2017; 40(2):e352-e356.]., (Copyright 2016, SLACK Incorporated.)

Objective: To study the biomechanical differences of the first carpometacarpal joint stability by using different reconstruction methods so as to provide theoretical basis for the clinical choice of reconstruction method., Methods: The upper limb specimens were selected from 12 fresh adult cadavers, which had no fracture, bone disease, dislocation of wrist joint, deformity, degeneration, or ligament injury on the anteroposterior and lateral X-ray films. The specimens were randomly divided into 5 groups: normal group, injury group, palmar carpometacarpal ligaments reconstruction group, dorsal carpometacarpal ligaments reconstruction group, and palmar and dorsal carpometacarpal ligaments reconstruction group. Three normal specimens were used as normal group, and then were made of the first carpometacarpal joint dislocation models (injury group); after the first carpometacarpal joint dislocation was established in the other 9 specimens; the volar ligament, dorsal ligament, and volar-dorsal ligaments were reconstructed with Eaton-Little method, Yin Weitian method, and the above two methods in 3 construction groups. The biomechanical test was done to obtain the load-displacement curve and to calculate the elastic modulus., Results: During biomechanical test, ligament rupture and loosening of Kirschner wire occurred in 1 case of injury group and palmar carpometacarpal ligaments reconstruction group; no slipping was observed. The elastic modulus values were (11.61±0.20), (5.39±0.12), (6.33±0.10), (7.12±0.08), and (8.30±0.10) MPa in normal group, injury group, palmar carpometacarpal ligaments reconstruction group, dorsal carpometacarpal ligaments reconstruction group, and palmar and dorsal carpometacarpal ligaments reconstruction group respectively, showing significant differences among groups ( P <0.05)., Conclusion: Volar ligament reconstruction, dorsal ligament reconstruction, and volar-dorsal ligament reconstruction all can greatly improve the stability of the first carpometacarpal joint. And the effect of volar-dorsal ligament reconstruction is the best, but the stability can not restore to normal.

Posttraumatic carpal and carpometacarpal dislocations represent a heterogeneous group of disorders resulting from high-energy wrist trauma. Perilunate injury is the most common and best-known manifestation of carpal dislocation, typically occurring after hyperextension trauma. Other forms are very rare and have different causative mechanisms. Carpometacarpal (CMC) dislocations are also uncommon and may affect isolated or multiple CMC joints. These lesions are prone to wrist instability if not treated promptly. The aim of this article is to provide a systematic radiologic approach to the evaluation of wrist injury and to present two acute cases of rare CMC dislocations., (Copyright © 2016 Elsevier Masson SAS. All rights reserved.)

The authors report and discuss the management of a 25-year-old male patient with a trapeziometacarpal joint dislocation complicated by a trapezium fracture. This injury combination is rare with only reported 15 cases. After closed reduction resulted in dorsal instability, anatomical reduction of the trapezium fracture and internal screw fixation were performed using an open approach. This fixation stabilized the joint but was fragile due to the small fragment size. For this reason, ligament reconstruction using half of the flexor carpi radialis tendon was added. At the last follow-up, 16 months later, the trapeziometacarpal joint was stable with a normal range of motion, but the patient had slight pain during physical effort and decreased pinch strength., (Copyright © 2016 SFCM. Published by Elsevier Masson SAS. All rights reserved.)

Unlabelled: The purpose of this study was to investigate motorcycle crash thumb injury patterns. We hypothesized that ulnar collateral ligament injuries at the thumb metacarpophalangeal joint would be most common and there would be a side predilection due to the clutch and brake positions. Motorcyclist admissions following injury between 2002 and 2013 were reviewed, and phalangeal and metacarpal injuries treated acutely identified. Demographics, injury, and treatment characteristics were recorded. Association between laterality and injury type was assessed. Of 128 patients, 59 underwent acute treatment for thumb injuries. Eleven patients sustained thumb ulnar collateral ligament injuries; 27 sustained thumb carpometacarpal injuries. Most carpometacarpal injuries were fracture-dislocations (19/27). Thumb carpometacarpal injuries had no overall side predilection; ulnar collateral ligament injuries occurred more on the right. Carpometacarpal fractures and dislocations are the most frequent motorcycle crash thumb injury, probably due to the mechanics of gripping handlebars and the high-energy force directed into the palm and against the metacarpal base., Level of Evidence: Level IV., (© The Author(s) 2015.)

We propose a method for open reduction and internal fixation of early and unstable ulnar (fourth and/or fifth) carpometacarpal joint (CMCJ) fracture subluxations or dislocations using a dorsal buttress plate. In ulnar CMCJ fracture dislocations, the metacarpal has a tendency to displace dorsally and proximally when there is an axial load. Using the dorsal buttress plate method of fixation, a plate is fixed proximally to the hamate, aligned parallel and dorsal to the metacarpal to act as a buttress, to resist this movement. To preserve the fourth and the fifth CMCJ mobility, the distal end of the plate is not fixed to the metacarpal base. We illustrate the use of this technique on 4 patients who had different patterns of injury at the ulnar CMCJ. All patients regained excellent range of motion and function. None of the patients had redisplacement or nonunion of fracture. The dorsal buttress plate is a viable option for fixation of early and unstable ulnar CMCJ fracture subluxations or dislocations.

It is well known that treatment of the old fracture-dislocations of the fifth carpometacarpal (CMC) joint is challenging. For patients with persistent pain due to this condition, numerous surgical techniques have been proposed. Here, we present a novel surgical technique, CMC joint suspension arthroplasty, using a partial slip of the extensor carpi ulnaris tendon. This procedure follows principles similar to the procedure of trapeziectomy with suspension arthroplasty for treatment of thumb CMC joint arthritis. We believe this suspension arthroplasty has several advantages compared with other surgical procedures. First, mobility of the fifth metacarpal is greatly preserved because the fifth metacarpal is stabilized only by the ligament against the fourth metacarpal. Second, the length of the fifth ray can be maintained by adjusting the level of the drill hole of the fourth metacarpal. Third, malrotation of the little finger can be prevented by drilling the holes of the fifth and fourth metacarpals in the proper direction. We believe this surgical technique could be a better treatment option for degenerative arthrosis of the fifth CMC joint.