Search

Bilingualism and socio-economic status (SES) differentially affect linguistic and cognitive development. However, less evidence has been collected regarding their impact on literacy trajectories. The present longitudinal study evaluated the literacy development of language minority bilingual children (LMBC) and monolingual peers with different SES. A group of LMBC with low-SES (n = 18) and monolingual peers with low (n = 18) or high (n = 14) SES were followed from 2nd to 5th grade through a set of tasks assessing decoding (words, nonwords, passage), reading, and listening comprehension, and spelling skills. The results showed that all groups achieved better performances over time in all measures, except listening comprehension. However, low-SES LMBC underperformed in spelling tasks compared to the monolingual groups. In reading comprehension, there was a time*group interaction that showed how low-SES LMBC reached similar performances of low-SES monolinguals in fifth grade, but both groups underperformed compared to the high SES monolingual group. The discussion is focused on the need for research and educational settings to consider the differential impact of bilingualism and SES. Bilingualism seems to be associated with a longer time in developing adequate spelling skills, whereas SES was the primary underpinning of the reading comprehension gap over time.

Despite providing important ecological functions, seagrass accumulation causes environmental and economic issues, including eutrophication and tourism reduction. Nowadays, seagrass wrack is commonly removed from the beaches and landfilled, which is considered the least desirable practice according to the European Union (EU) Waste Framework Directive. In this study, different management strategies for seagrass valorisation, including anaerobic digestion (AD), composting and ecological restoration, were considered using a life cycle assessment (LCA) perspective. The aim of the work was to evaluate more ecological and economic alternatives to landfill and to provide a robust evaluation method for public and private companies. An economic assessment was subsequently conducted, considering both direct and indirect impacts with a life cycle costing (LCC) approach. A selected beach located in the Northeast Mediterranean Sea was considered as a relevant case-study. The environmental impacts of the seagrass management scenarios were evaluated with the method ReCiPe 2016H, using both midpoint and endpoint levels. LCA results showed that ecological restoration and AD were the best alternatives in terms of environmental performances because of biogas production used as a renewable energy source. The impacts of the alternative management strategies were significantly lower than the current landfill strategy, -70% considering the categories of human health, ecosystems and resources, and -95% considering global warming potential category. The LCC analysis proved that composting was the best alternative (NPV > 1.27 M€), due to lower operating costs and higher fertilizer value. The obtained results can help beach management companies and public administrations to select the best operational strategies to reduce the environmental and economic impact of seagrass collection and treatment.

The main aim of the study was to propose a useful methodological approach to define easily understandable indicators to use in communication campaigns organized to improve the efficacy of municipal solid waste collection. For this purpose, six economic-environmental indicators were defined, combining life cycle thinking and environmental communication. The indicators make it possible to obtain several combinations that can follow a variety of communication channels. Three indicators (quantity of recyclable materials recoverable from unsorted residual waste; total potential economic saving; number of jobs for young people as communicators) are expressed in absolute value and therefore refer to the whole community even if they are also good for single-targeted messages. The other three indicators (potential economic saving for each citizen; per capita saving of carbon dioxide equivalent; per capita saving of Disability Adjusted Life Years) are normalized with respect to the number of inhabitants and therefore refer to the individual citizen, but can also be used for global messages. As a case example, the methodology was applied to the collection of paper and cardboard in twelve Southern Italy cities obtaining very promising results. For example, the maximum quantity of paper and cardboard recoverable from unsorted waste would allow Naples and Palermo to recover more than €15 million. The maximum potential economic saving for each citizen was 25 €/capita. The economic saving obtained for Naples and Palermo could be translated in more than one thousand positions as young environmental communicators. Catania was the city with both the highest per capita potential saving of carbon dioxide (>60 kg CO2eq./capita) and maximum hypothetical per capita ‘life-time recovery’ (almost an hour). The innovative communication method used (‘Greenopoli’) assumed that school is the starting point to obtain a change of mindset because speaking with students (all potential communicators) means indirectly communicating with all other targets.

The main aim of this study was to define a procedure useful to evaluate the potential environmental, social and economic benefits contained in paper and cardboard (or other recyclables), which are wasted in the unsorted fraction of municipal solid waste (MSW). To give a practical example, the procedure was applied to the 550 municipalities of the Campania region, in Southern Italy, but the developed procedure is applicable in any context in an ‘urban mining’ perspective. The procedure consists of five phases and uses two methodologies: one for the estimation of the composition analysis of the unsorted residual waste and another for the calculation of sustainability indicators able to measure the benefits wasted in the unsorted residual MSW. Six indicators were defined: two for the environment (carbon footprint and ecological footprint), two for the society (health footprint and occupational benefits) and two for the economy (economic profit and economic saving). The first methodology was developed by the regional environmental protection agency to update the MSW regional management plan. The second methodology is based on the use of the Life Cycle Assessment (LCA) through which it was possible to calculate the reference parameters useful for the calculation of the impacts (i.e., loss of benefits) for recycling, mechanical and biological treatment (MBT), incineration and landfilling of paper and cardboard contained in the unsorted residual waste. The obtained results confirmed the presence of such an enormous deposit of recyclable materials contained in the unsorted residual waste, which is a potential source, but not exploited, of environmental, social and economic benefits. For instance, the paper and cardboard ‘urban mine’ of Naples was greater than 16 million of euro (economic profit + economic saving), with a potential saving of around 11.4 million of kgCO2eq. (carbon footprint), 207 million of m2 (ecological footprint), 44 Disability Adjusted Life Years (health footprint), with a creation of 30 job positions in the waste management sector (occupational benefits).

The main aim of the study was to assess the environmental performance, through the application of the life cycle assessment, of a recycled paper production process focusing on the energy aspect. The production process occurred in a paper mill that produces packaging paper using paper and cardboard from source separation of municipal solid waste as raw materials. Two scenarios (S1 and S2) were defined by their energy supply sources. A cogeneration (CHP) system using natural gas for the combined production of thermal and electric energy was the source in S1. The Italian electricity grid (using the Italian country mix) and a natural gas boiler were the separate sources for electric and thermal energy, respectively, in S2. Finally, in order to evaluate the environmental effects on the results of the study about the variation in the natural gas supply source, four alternative Italian import mixes (M1, M2, M3, and M4) were defined by varying the contribution of the supplier countries. The environmental impacts were evaluated with ReCiPe 2016 (H) using both midpoint and endpoint approaches. The results showed that for both the scenarios, the energy consumption was the main cause of impacts mainly because of the natural gas contribution. The presence of the cogeneration (CHP) system generated significant environmental benefits compared with the use of energy provided by more conventional sources. The production and use of chemicals as well as the disposal of waste produced during the paper production were other environmental hotspots. The variation in the composition of the Italian import mix of natural gas, in terms of the supplier country’s contribution, had a significant influence on the results. The import of natural gas from Russia was the most impactful option. Since Russia is the country that contributes to the Italian import mix the most, in the next years, the use of natural gas in Italy could become increasingly impactful. Therefore, the replacement of natural gas with renewable sources is an urgent priority.

Background Despite availability of clinical guidelines, underdiagnosis, undertreatment, and poor adherence are still significant concerns in allergic rhinitis (AR) therapeutic management. We investigated clinical practice patterns and prescribing behavior of Italian healthcare professionals (HCPs) specialized in AR. Methods One-hundred allergologists, 100 ear, nose and throat (ENT) specialists, and 150 general practitioners (GPs) were recruited. The survey assessed: socio-demographic, work experience, monthly caseload, prescription drivers. Next, HCPs were invited to retrospectively recover patients’ clinical data to investigate: AR clinical characteristics, therapy management, prescription patterns, patient adherence. Descriptive statistics, Chi square, One-Way analysis of variance, and Two-Way Analysis of Variance were performed. Results Allergologists visited more AR patients (31% of monthly caseload) than ENTs (21%, p 7). Conclusions This survey describes the therapeutic approach adopted by Italian physicians to cope with AR and shows that HCPs underestimated AR severity and had a non-realistic perception of patients’ adherence. These findings suggest that further efforts are required to improve AR clinical management in Italy.

Glass is the most commonly used packaging for wine worldwide. However, one of the main causes of environmental impacts of the wine life cycle is the production of glass bottles due to the high incidence of its weight and the consequent huge consumption of energy for its production. Using lighter packaging alternatives (such as bag-in-box, aseptic carton or PET bottles) significantly decreases the environmental impact of the wine life cycle. In Italy, there is widespread scepticism towards wine bottled in alternative packaging. For this reason, this study presents a preliminary survey addressed to a sample of 1000 wine consumers to explore their attitudes and willingness to purchase wine in packaging alternatives that are more sustainable than glass bottles. The results show how most of the respondents (91%) are not willing to consider packaging alternatives for wine and want to buy only wine packaged in glass bottles mainly because they consider alternative packaging not suitable. Despite this, about 62% of them state that they would be willing to re-evaluate the purchase of wine in alternative packaging after being informed that, for most wines, the quality of the wine does not change in alternative packaging and that by using them the wine sustainability could improve. This last sample fraction drinks a little (less than one wine glass a day); their buying choices are affected by neither the main wine features (such as producer company, country of origin and information on label) nor those of the glass bottle (such as weight, colour, and shape). Therefore, this preliminary study has identified and characterized a less traditionalists wine consumer fraction that, therefore, could change their mind regarding the purchasing of wine in alternative packaging. This result shows that these consumers could be favourable towards a greater presence of wine in alternative packaging on the market. This could be a useful hint for wine producers who want to differentiate themselves from competitors by using alternative packaging and gaining interesting market niches.

The main aim of this study was to evaluate, in the design phase, the most environmentally sound alternative between two on-site small-scale wastewater treatment systems (designed for 15 inhabitants), namely an activated sludge compact system and a constructed wetland system (both in linear low-density polyethylene), using Life Cycle Assessment. The procedure considered three sensitive parameters with three values. All the 27 combinations were evaluated with three different impact assessment methods (generating 81 comparison cases): IPCC 2007 100 years, Ecological Footprint and ReCiPe 2008 H. The constructed wetland system was the best environmental choice in 93% of the cases. Realizing the two treatment systems in different European countries, the activated sludge system would be the best environmental choice in some cases. Considering the production of electricity with photovoltaic systems, the total impact of the activated sludge system, evaluated with the ReCiPe 2008 H method, would be smaller than that of the constructed wetland system. The variation of the operating lifetime parameter had a major influence on the constructed wetland system, where the greatest consumption of energy and resources occurs during the construction phase. There were significant differences among the results with ReCiPe 2008 H and those with Ecological Footprint and IPCC 2007 100 years. Therefore, in a Life Cycle Assessment study, it would be preferable to adopt several impact assessment methods in order to verify how the results can vary.

This paper presents the results of a survey regarding customer satisfaction as well as other aspects relating to the frequency and motivations of citizens going to a separate collection centre (SCC) for recyclables in a Southern Italian town. The study was carried out in 2015 to verify whether there were significant changes in the behaviours and opinions of the SCC’s users, who had been interviewed in 2013, in the light of the change of the local administration. The majority of the respondents (60.4%) coupled going to the SCC with other tasks, with 58.6% of them going to a supermarket. Therefore, future SCCs should localized near shopping centres (it would be preferable to have small and numerous SCCs). Chi-square and Fisher's exact tests showed how SCC’s users of the town under study behaved as a community. The percentage of respondents that declared to ‘agree’ or ‘strongly agree’ with the idea that only putrescibles and residue could be collected at their home, with all the other materials being collected at the SCC, increased from 56.6%, in 2013, up to 59.0%, in 2015. The percentage of respondents that declared going to the SCC due to environmental motivations was unanimous. Moreover, the saving of money for the community became the second preferred option, with a significant improvement (from 65.6%, in 2013, up to 93.2%, in 2015). Therefore, the community’s interests over the individual’s were privileged. The SCC’s users confirmed their attention to environmental issues even though the local administration changed. It is probable that this could be the result of maintaining high standard of service as well as a good job in terms of communication, continuous involvment of citizens and the adoption of good environmental practices.

This study presents an evaluation of the environmental performance of an ice cream cup made of polyethylene (PE)/paper laminate using a life cycle assessment approach 'from cradle to grave'. Two opposite alternative disposal scenarios, as well as their intermediate combinations, were considered: 100% incineration and 100% landfilling. The environmental impacts were calculated using the EPD 2013 evaluation method since the study was developed in an Environmental Product Declaration perspective as well as the method ReCiPe 2008 H at the endpoint level. PE/paper laminate production was the most impactful process since it provided the highest contribution to total impacts in four of six impact categories considered. Ice cream cup production was the second impactful process. The 100% incineration scenario provided negligible contribution to life cycle total impact for all impact categories; while considering the landfilling scenario, the percentage contributions to the total impact provided by the end-of-life phase increased considerably, until to be comparable to the contributions provided by the production processes of the PE/paper laminate and the ice cream cup. The obtained results highlighted that different disposal scenarios can affect significantly the conclusions of a study. At the endpoint level, incineration was more environmentally sound than landfilling for all the ReCiPe damage categories.

Waste cooking oil (WCO) can be a useful secondary raw material, if properly managed. On the contrary, uncontrolled disposal generates negative environmental impacts as well as economic loss. Therefore, improving WCO recovery rate, with the cooperation of citizens and effective collection programs, is fundamental. The aim of the study was to investigate the reason for the low recovery of WCO in those areas suffering serious waste management problems such as the Campania region in Southern Italy. For this purpose, the case of a WCO collection program adopted in Angri, a town of around 34,000 people with a high population density, was studied. In 2015, the collection program was managed by a social cooperative, while, in 2016, after the change of the local government, the collection of WCO was entrusted to a private company. In 2015, the households&rsquo, participation in the collection program was surveyed through a structured questionnaire. The results revealed that the collection of WCO was practiced by 53% of the respondents. Among those not collecting WCO, 76% of the sample wrongly disposed of WCO in their home (kitchen or toilet). Misinformation was the main reason why they did not adhere to the collection program. Therefore, it was suggested to support information and environmental education campaigns to promote environmental awareness of citizens. Unfortunately, the change of management, together with serious problems in the collection of municipal waste in the whole region, due to the continuous closures of the mechanical and biological plants, produced a sharp decline in the collection from 7730 kg in 2015 to an average of 3800 kg for the period 2016&ndash, 2019, with a loss of more than 15,000 kg of WCO wrongly disposed with consequent environmental and economic damage. Therefore, information and awareness campaigns are important but the form of entrusting the collection service is equally important, especially in areas with long-standing waste management problems.

The main aim of this study was to perform a Life cycle assessment study as well as an economic evaluation of the recovery of recyclable materials in a municipal solid waste management system. If citizens separate erroneously waste fractions, they produce both environmental and economic damages. The environmental and economic evaluation was performed for the case study of Nola (34.349 inhabitants) in Southern Italy, with a kerbside system that assured a source separation of 62% in 2014. The economic analysis provided a quantification of the economic benefits obtainable for the population in function of the achievable percentage of source separation. The comparison among the environmental performance of four considered scenarios showed that the higher the level of source separation was, the lower the overall impacts were. This occurred because, even if the impacts of the waste collection and transport increased, they were overcome by the avoided impacts of the recycling processes. Increasing the source separation by 1% could avoid the emission of 5 kg CO

This paper investigates the total and per capita environmental impacts of municipal wastewater treatment in the function of the population equivalent (PE) with a Life Cycle Assessment (LCA) approach using the processes of the Ecoinvent 2.2 database available in the software tool SimaPro v.7.3. Besides the wastewater treatment plant (WWTP), the study also considers the sewerage system. The obtained results confirm that there is a 'scale factor' for the wastewater collection and treatment even in environmental terms, in addition to the well-known scale factor in terms of management costs. Thus, the more the treatment plant size is, the less the per capita environmental impacts are. However, the Ecoinvent 2.2 database does not contain information about treatment systems with a capacity lower than 30 PE. Nevertheless, worldwide there are many sparsely populated areas, where it is not convenient to realize a unique centralized WWTP. Therefore, it would be very important to conduct an LCA study in order to compare alternative on-site small-scale systems with treatment capacity of few PE.

This study proposes a comparison of the environmental impacts calculated with the Life Cycle Assessment (LCA) methodology of two on-site small-scale activated sludge total oxidation systems in linear low-density polyethylene (LLDPE) and vibrated reinforced concrete (VRC). The plants were designed to ensure a treatment capacity of 5, 10, 20 and 30 equivalent inhabitants (PE). The main aim of the study was to evaluate the incidence of construction, disposal and operation phases on the total impacts evaluated with three different methods: ReCiPe 2008, Ecological Footprint and IPCC 2007 100 years. The most significant phase for both treatment lines was the use phase, which contributed more than 80% to the total impacts. The construction phase was the second most impactful phase with an incidence less than 25% for both systems and for all the considered impacts assessment methods. The plant in LLDPE was more eco-friendly than that in (VRC). The plant in VRC was always most impactful, even comparing each single phase of the life cycle and for all the treatment capacities taken into consideration. Finally, the obtained results were not dependent on the impact assessment method considered.

Life Cycle Assessment (LCA) is a powerful tool that allows evaluation of the environmental performances of a product, service or process considering the whole life cycle or a part of it. In the wine sector, the application of LCA has grown significantly in recent years and several studies have been carried out about this topic that are similar to other research fields. Nowadays, LCA is an important and acknowledged environmental assessment tool but its application to the wine sector is still in a developing phase. For this reason, the present study proposes a critical review of papers dealing with both the wine sector and LCA. The critical review points out that the main wine hotspots are the viticulture phase (mainly due to fuel, fertilizer and pesticides consumption) and the wine primary packaging production (due to glass bottles). Furthermore, the papers taken into consideration have a wide variability in the system boundaries definition as well as a shortage of availability of original and site-specific inventory data. Such key factors are sensitive aspects that have a huge influence on the results of a study and they are also affected by a wide variability: these issues need further scientific contribution through future studies.

This study performed a Life Cycle Assessment of the collection, transport, treatment and disposal of source-separated municipal waste (MW) in Baronissi, a town of 17,000 inhabitants in the Campania region of Italy. Baronissi is a high-performing town in a region with scarcity of MW facilities. The environmental impacts were assessed with three different methods—IPCC 2007, Ecological Footprint and ReCiPe 2008—in order to evaluate how they influence the results as well as how the global warming affects the results, since it is one of the major environmental concerns of people. The obtained results showed how the presence of facilities in the area is fundamental. Their lack means high environmental loads due to the transportation of materials for long distances, particularly for the organic fraction. The presence of a composting plant at 10 km from the municipality would result in a decrease of 65% of the impacts due to the external transport, regardless of the evaluation method. The results obtained with ReCiPe 2008 and Ecological Footprint agreed, while those obtained with IPCC 2007 were very different since global warming is strongly affected by the transport phase. IPCC 2007 does not allow to take into account the advantages obtainable with a good level of separate collection. Considering a single impact evaluation method, there is a high risk of coming to misleading conclusions.