Search

The application of hyperspectral data in machine learning models can contribute to the rapid and accurate determination of caffeine content in coffee beans. This study aimed to identify the machine learning algorithm with the best performance for predicting caffeine content and to find input data for these models that can improve the accuracy of these algorithms. The coffee beans were harvested one year after the seedlings were planted. The fresh beans were taken to the spectroscopy laboratory (Laspec) at the Federal University of Mato Grosso do Sul, Chapadão do Sul campus, for spectral evaluation using a spectroradiometer. For the analysis, the dried coffee beans were ground and sieved for the quantification of caffeine, which was carried out using a liquid chromatograph on the Waters Acquity 1100 series UPLC system, with an automatic sample injector. The spectral data of the beans, as well as the spectral data of the roasted and ground coffee, were analyzed using machine learning (ML) algorithms to predict caffeine content. Four databases were used as input: the spectral information of the bean (CG), the spectral information of the bean with additional clone information (CG+C), the spectral information of the bean after roasting and grinding (CGRG) and the spectral information of the bean after roasting and grinding with additional clone information (CGRG+C). The caffeine content was used as an output to be predicted. Each database was subjected to different machine learning models: artificial neural networks (ANNs), decision tree (DT), linear regression (LR), M5P, and random forest (RF) algorithms. Pearson’s correlation coefficient, mean absolute error, and root mean square error were tested as model accuracy metrics. The support vector machine algorithm showed the best accuracy in predicting caffeine content when using hyperspectral data from roasted and ground coffee beans. This performance was significantly improved when clone information was included, allowing for an even more accurate analysis.

Identifying machine learning models that are capable of classifying soybean genotypes according to micronutrient content using only spectral data as input is relevant and useful for plant breeding programs and agricultural producers. Therefore, our objective was to classify soybean genotypes according to leaf micronutrient levels using multispectral images. In the 2019/20 crop year, a field experiment was carried out with 103 F2 soybean populations in the experimental area of the Federal University of Mato Grosso do Sul, in Chapadão do Sul, Brazil. The data were subjected to machine learning analysis using algorithms to classify genotypes according to leaf micronutrient content. The spectral data were divided into three distinct input groups to be tested in the machine learning models: spectral bands (SBs), vegetation indices (VIs), and combining VIs and SBs. The algorithms tested were: J48 Decision Tree (J48), Random Forest (RF), Support Vector Machine (SVM), Perceptron Multilayer Neural Network (ANN), Logistic Regression (LR), and REPTree (DT). All model parameters were set as the default settings in Weka 3.8.5 software. The Random Forest (RF) algorithm outperformed (>90 for CC and >0.9 for Kappa and Fscore) regardless of the input used, demonstrating that it is a robust model with good data generalization capacity. The DT and J48 algorithms performed well when using VIs or VIs+SBs inputs. The SVM algorithm performed well with VIs+SBs as input. Overall, inputs containing information about VIs provided better results for the classification of soybean genotypes. Finally, when deciding which data should serve as input in scenarios of spectral bands, vegetation indices or the combination (VIs+SBs), we suggest that the ease and speed of obtaining information are decisive, and, therefore, a better condition is achieved with band-only inputs. This allows for the identification of genetic materials that use micronutrients more efficiently and the adaptation of management practices. In addition, the decision to be made can be made quickly, without the need for chemical evaluation in the laboratory.

Panicum maximum cultivars have distinct characteristics, especially morphological ones related to the leaf structure and coloration, and there may be differences in the spectral behavior captured by sensors. These differences can be used in classification using machine learning (ML) algorithms to differentiate biodiversity within the same species. The objectives of this study were to identify ML models able to differentiate P. maximum cultivars and determine which is the best spectral input for these algorithms and whether reducing the sample size improves the response of the algorithms. The experiment was carried out at the experimental area of the Forage Sector of the School Farm belonging to the Federal University of Mato Grosso do Sul (UFMS). The leaf samples of the cultivars Massai, Mombaça, Tamani, Quênia, and Zuri were collected from experimental plots in the field. Analysis was carried out on 120 leaf samples from the P. maximum cultivars using a VIS/NIR hyperspectral sensor. After obtaining the spectral data and separating them into bands, the data were submitted for ML analysis to classify the cultivars based on the spectral variables. The algorithms tested were artificial neural networks (ANNs), REPTree and J48 decision trees, random forest (RF), and support vector machine (SVM). A logistic regression (LR) was used as a traditional classification method. Two input models were evaluated in the algorithms: the entire spectrum band provided by the sensor (ALL) and another input configuration using the calculated bands. The reflectances from the P. maximum cultivars showed different behavior, especially in the green and NIR regions. RL and ANN algorithms using all information in the spectrum are able to accurately classify the cultivars, reaching accuracies above 70 for CC and above 0.6 for kappa and F-score. VIS/NIR leaf reflectance can be a powerful tool for low-cost, non-destructive, and high-performance analysis to distinguish P. maximum cultivars. Here, we achieved better model accuracy using only 40 leaf samples. In the present study, the J48 decision tree model proved to have good classification performance regardless of the sample size used, which makes it a strategic model for forage cultivar classification studies in smaller or larger datasets.

Making plant breeding programs less expensive, fast, practical, and accurate, especially for soybeans, promotes the selection of new soybean genotypes and contributes to the emergence of new varieties that are more efficient in absorbing and metabolizing nutrients. Using spectral information from soybean genotypes combined with nutritional information on secondary macronutrients can help genetic improvement programs select populations that are efficient in absorbing and metabolizing these nutrients. In addition, using machine learning algorithms to process this information makes the acquisition of superior genotypes more accurate. Therefore, the objective of the work was to verify the classification performance of soybean genotypes regarding secondary macronutrients by ML algorithms and different inputs. The experiment was conducted in the experimental area of the Federal University of Mato Grosso do Sul, municipality of Chapadão do Sul, Brazil. Soybean was sown in the 2019/20 crop season, with the planting of 103 F2 soybean populations. The experimental design used was randomized blocks, with two replications. At 60 days after crop emergence (DAE), spectral images were collected with a Sensifly eBee RTK fixed-wing remotely piloted aircraft (RPA), with autonomous takeoff control, flight plan, and landing. At the reproductive stage (R1), three leaves were collected per plant to determine the macronutrients calcium (Ca), magnesium (Mg), and sulfur (S) levels. The data obtained from the spectral information and the nutritional values of the genotypes in relation to Ca, Mg, and S were subjected to a Pearson correlation analysis; a PC analysis was carried out with a k-means algorithm to divide the genotypes into clusters. The clusters were taken as output variables, while the spectral data were used as input variables for the classification models in the machine learning analyses. The configurations tested in the models were spectral bands (SBs), vegetation indices (VIs), and a combination of both. The combination of machine learning algorithms with spectral data can provide important biological information about soybean plants. The classification of soybean genotypes according to calcium, magnesium, and sulfur content can maximize time, effort, and labor in field evaluations in genetic improvement programs. Therefore, the use of spectral bands as input data in random forest algorithms makes the process of classifying soybean genotypes in terms of secondary macronutrients efficient and important for researchers in the field.

The objectives of this work are (i) to classify soybean cultivars under different irrigation managements using hyperspectral data, looking for the best machine-learning algorithm for the classification and the input that improves the performance of the models. The experiment was implemented in the 2023/24 harvest in the experimental area of the Federal University of Mato Grosso do Sul, Câmpus Chapadão do Sul, Mato Grosso do Sul, and it was conducted in a strip scheme with seven cultivars subjected to irrigated and rainfed management. Sixty days after crop emergence, three leaves per plot were collected for evaluation by the hyperspectral sensor. The spectral data was then separated into 28 bands to reduce dimensionality. In this way, two databases were generated: one with all the spectral information provided by the sensor (WL) and one with the 28 spectral bands (SB). Each database was subjected to different machine-learning models to ascertain the improved accuracy of the models in distinguishing the different eucalyptus species. The models tested were artificial neural networks (ANN), decision trees (DT), linear regression (LR), M5P algorithm, random forest (RF), and support vector machine (SVM). The results demonstrate the effectiveness of machine-learning models in differentiating soybean management under rainfed and irrigated conditions, highlighting the advantage of hyperspectral data (WL) over selected spectral bands (SB). Models such as the support vector machine (SVM) showed the best levels of accuracy when using the entire available spectrum. On the other hand, artificial neural networks (ANN) performed well with spectral band data, demonstrating their ability to work with smaller data sets without compromising the classification.

Plants respond to biotic and abiotic pressures by changing their biophysical and biochemical aspects, such as reducing their biomass and developing chlorosis, which can be readily identified using remote-sensing techniques applied to the VIS/NIR/SWIR spectrum range. In the current scenario of agriculture, production efficiency is fundamental for farmers, but diseases such as target spot continue to harm soybean yield. Remote sensing, especially hyperspectral sensing, can detect these diseases, but has disadvantages such as cost and complexity, thus favoring the use of UAVs in these activities, as they are more economical. The objectives of this study were: (i) to identify the most appropriate input variable (bands, vegetation indices and all reflectance ranges) for the metrics assessed in machine learning models; (ii) to verify whether there is a statistical difference in the response of NDVI (normalized difference vegetation index), grain weight and yield when subjected to different levels of severity; and (iii) to identify whether there is a relationship between the spectral bands and vegetation indices with the levels of target spot severity, grain weight and yield. The field experiment was carried out in the 2022/23 crop season and involved different fungicide treatments to obtain different levels of disease severity. A spectroradiometer and UAV (unmanned aerial vehicle) imagery were used to collect spectral data from the leaves. Data were subjected to machine learning analysis using different algorithms. LR (logistic regression) and SVM (support vector machine) algorithms performed better in classifying target spot severity levels when spectral data were used. Multivariate canonical analysis showed that healthy leaves stood out at specific wavelengths, while diseased leaves showed different spectral patterns. Disease detection using hyperspectral sensors enabled detailed information acquisition. Our findings reveal that remote sensing, especially using hyperspectral sensors and machine learning techniques, can be effective in the early detection and monitoring of target spot in the soybean crop, enabling fast decision-making for the control and prevention of yield losses.

Mato Grosso state is the biggest maize producer in Brazil, with the predominance of cultivation concentrated in the second harvest. Due to the need to obtain more accurate and efficient data, agricultural intelligence is adapting and embracing new technologies such as the use of satellites for remote sensing and geographic information systems. In this respect, this study aimed to map the second harvest maize cultivation areas at Canarana-MT in the crop year 2019/2020 by using geographic object-based image analysis (GEOBIA) with different spatial, spectral, and temporal resolutions. MSI/Sentinel-2, OLI/Landsat-8, MODIS-Terra and MODIS-Aqua, and PlanetScope imagery were used in this assessment. The maize crops mapping was based on cartographic basis from IBGE (Brazilian Institute of Geography and Statistics) and the Google Earth Engine (GEE), and the following steps of image filtering (gray-level co-occurrence matrix—GLCM), vegetation indices calculation, segmentation by simple non-iterative clustering (SNIC), principal component (PC) analysis, and classification by random forest (RF) algorithm, followed finally by confusion matrix analysis, kappa, overall accuracy (OA), and validation statistics. From these methods, satisfactory results were found; with OA from 86.41% to 88.65% and kappa from 81.26% and 84.61% among the imagery systems considered, the GEOBIA technique combined with the SNIC and GLCM spectral and texture feature discriminations and the RF classifier presented a mapping of the corn crop of the study area that demonstrates an improved and aided the performance of automated multispectral image classification processes.

Abstract The 2020 environmental catastrophe in Pantanal has highlighted the fragility of environmental policies and practices for managing and fighting fires in this biome. Therefore, it is essential to know the causes and circumstances that potentiate these fires. This study aimed to: (I) assess the relationship between fire foci and carbon absorption (GPP), precipitation, and carbon dioxide (CO2) flux; (ii) analyze vegetation recovery using the differenced normalized burn ratio (ΔNBR) in Brazilian Pantanal between 2001 and 2022; and (iii) identify priority areas, where the highest intensities of fire foci have occurred, in order to guide public policies in Brazil to maintain local conservation. To this purpose, fire foci were detected using data from the MODIS MOD14/MYD14 algorithm, annual precipitation with CHIRPS (Climate Hazards Group InfraRed Precipitation with Station data), and CO2 flux using the MODIS/MODO9A1 product, and Gross Primary Production (GPP) with the MODIS/MOD17A2 product. The severity of the burned area was also assessed using the ΔNBR index and the risk areas were determined using the averages of these images. During the time series studied, a total of 300,127 fire foci were detected throughout the Pantanal, where 2020 had the highest number of foci and the lowest accumulated precipitation. The years with the highest precipitation were 2014 and 2018. The year 2018 was also the second year with the highest GPP value. The Pettit test showed a trend for 2008 and 2011 as the points of change in the CO2 flux and GPP variables. Principal component analysis clustered fire foci and precipitation on opposite sides, as well as GPP and CO2 flux, while ΔNBR clustered HS, MHS and MLS classes with the years 2020, 2019, 2002 and 2021. There was a high negative correlation between fire foci × rainfall and GPP × CO2 flux. The years with the largest areas of High severity (HS), Moderate-high severity (MHS) and Moderate-low severity (MLS) classes were 2020 and 2019, respectively. The most vulnerable areas for severe fires were the municipalities of Cáceres, Poconé, and Corumbá. The major fire catastrophe in 2020 is correlated with the low precipitation in 2019, the high precipitation in 2018, and the increased GPP, as well government policies unfavorable to the environment.

Abstract Background The Cerrado is the most biodiverse savanna and maintains other biomes. Aware of its significance, this paper evaluated the Brazilian Cerrado’s climatic, environmental, and socioeconomic aspects using remote sensing data and spatial statistics (correlation analysis and principal components analysis—PCA). Following the measures of sample adequacy (MSA) and Kaiser–Meyer–Olkin (KMO) tests, seventeen variables were evaluated. Results The MSA revealed that the dataset had a good quality (0.76), and nine variables were selected: elevation, evapotranspiration, active fires, Human Development Index (HDI), land use and land cover (LULC; shrubland and cropland/rainfed), rainfall (spring and autumn), and livestock. The correlation matrix indicated a positive (negative) association between HDI and autumn rainfall (HDI and active fires) with a value of 0.77 (− 0.55). The PCA results determined which three principal components (PC) were adequate for extracting spatial patterns, accounting for 68.02% of the total variance with respective values of 38.59%, 16.89%, and 12.5%. Due to economic development and agribusiness, Cerrado’s northern (central, western, and southern) areas had negative (positive) score HDI values, as shown in PC1. Climatic (rainfall—spring and fall) and environmental (cropland/rainfed and shrubland) aspects dominated the PC2, with negative scores in northern and western portions due to the transition zone between Amazon and Cerrado biomes caused by rainfall variability. On the other hand, environmental aspects (LULC-shrubland and elevation) influenced the PC3; areas with high altitudes (> 500 m) received a higher score. Conclusion Agricultural expansion substantially affected LULC, leading to deforestation-caused suppression of native vegetation.

Using multispectral sensors attached to unmanned aerial vehicles (UAVs) can assist in the collection of morphological and physiological information from several crops. This approach, also known as high-throughput phenotyping, combined with data processing by machine learning (ML) algorithms, can provide fast, accurate, and large-scale discrimination of genotypes in the field, which is crucial for improving the efficiency of breeding programs. Despite their importance, studies aimed at accurately classifying sorghum hybrids using spectral variables as input sets in ML models are still scarce in the literature. Against this backdrop, this study aimed: (I) to discriminate sorghum hybrids based on canopy reflectance in different spectral bands (SB) and vegetation indices (VIs); (II) to evaluate the performance of ML algorithms in classifying sorghum hybrids; (III) to evaluate the best dataset input for the algorithms. A field experiment was carried out in the 2022 crop season in a randomized block design with three replications and six sorghum hybrids. At 60 days after crop emergence, a flight was carried out over the experimental area using the Sensefly eBee real time kinematic. The spectral bands (SB) acquired by the sensor were: blue (475 nm, B_475), green (550 nm, G_550), red (660 nm, R_660), Rededge (735 nm, RE_735) e NIR (790 nm, NIR_790). From the SB acquired, vegetation indices (VIs) were calculated. Data were submitted to ML classification analysis, in which three input settings (using only SB, using only VIs, and using SB + VIs) and six algorithms were tested: artificial neural networks (ANN), support vector machine (SVM), J48 decision trees (J48), random forest (RF), REPTree (DT) and logistic regression (LR, conventional technique used as a control). There were differences in the spectral signature of each sorghum hybrid, which made it possible to differentiate them using SBs and VIs. The ANN algorithm performed best for the three accuracy metrics tested, regardless of the input used. In this case, the use of SB is feasible due to the speed and practicality of analyzing the data, as it does not require calculations to perform the VIs. RF showed better accuracy when VIs were used as an input. The use of VIs provided the best performance for all the algorithms, as did the use of SB + VIs which provided good performance for all the algorithms except RF. Using ML algorithms provides accurate identification of the hybrids, in which ANNs using only SB and RF using VIs as inputs stand out (above 55 for CC, above 0.4 for kappa and around 0.6 for F-score). There were differences in the spectral signature of each sorghum hybrid, which makes it possible to differentiate them using wavelengths and vegetation indices. Processing the multispectral data using machine learning techniques made it possible to accurately differentiate the hybrids, with emphasis on artificial neural networks using spectral bands as inputs and random forest using vegetation indices as inputs.

Assessing different levels of red gum lerp psyllid (Glycaspis brimblecombei) can influence the hyperspectral reflectance of leaves in different ways due to changes in chlorophyll. In order to classify these levels, the use of machine learning (ML) algorithms can help process the data faster and more accurately. The objectives were: (I) to evaluate the spectral behavior of the G. brimblecombei attack levels; (II) find the most accurate ML algorithm for classifying pest attack levels; (III) find the input configuration that improves performance of the algorithms. Data were collected from a clonal eucalyptus plantation (clone AEC 0144—Eucalyptus urophilla) aged 10.3 months old. Eighty sample evaluations were carried out considering the following severity levels: control (no shells), low infestation (N1), intermediate infestation (N2), and high infestation (N3), for which leaf spectral reflectances were obtained using a spectroradiometer. The spectral range acquired by the equipment was 350 to 2500 nm. After obtaining the wavelengths, they were grouped into representative interval means in 28 bands. Data were submitted to the following ML algorithms: artificial neural networks (ANN), REPTree (DT) and J48 decision trees, random forest (RF), support vector machine (SVM), and conventional logistic regression (LR) analysis. Two input configurations were tested: using only the wavelengths (ALL) and using the spectral bands (SB) to classify the attack levels. The output variable was the severity of G. brimblecombei attack. There were differences in the hyperspectral behavior of the leaves for the different attack levels. The highest attack level shows the greatest distinction and the highest reflectance values. LR and SVM show better accuracy in classifying the severity levels of G. brimblecombei attack. For the correct classification percentage, the RL and SVM algorithms performed better, both with accuracy above 90%. Both algorithms achieved F-score values close to 0.90 and above 0.8 for Kappa. The entire spectral range guaranteed the best accuracy for both algorithms.

Abstract Background Precision agriculture techniques are widely used to optimize fertilizer and soil applications. Furthermore, these techniques could also be combined with new statistical tools to assist in phenotyping in breeding programs. In this study, the research hypothesis was that soybean cultivars show phenotypic differences concerning wavelength and vegetation index measurements. Results In this research, we associate variables obtained via high-throughput phenotyping with the grain yield and cycle of soybean genotypes. The experiment was carried out during the 2018/2019 and 2019/2020 crop seasons, under a randomized block design with four replications. The evaluated soybean genotypes included 7067, 7110, 7739, 8372, Bonus, Desafio, Maracai, Foco, Pop, and Soyouro. The phenotypic traits evaluated were: first pod height (FPH), plant height (PH), number of branches (NB), stem diameter (SD), days to maturity (DM), and grain yield (YIE). The spectral variables evaluated were wavelengths and vegetation indices (NDVI, SAVI, GNDVI, NDRE, SCCCI, EVI, and MSAVI). The genotypes Maracai and Foco showed the highest grain yields throughout the crop seasons, in addition to belonging to the groups with the highest means for all VIs. YIE was positively correlated with the NDVI and certain wavelengths (735 and 790 nm), indicating that genotypes with higher values for these spectral variables are more productive. By path analyses, GNDVI and NDRE had the highest direct effects on the dependent variable DM, while NDVI had a higher direct effect on YIE. Conclusions Our findings revealed that early and productive genotypes can be selected based on vegetation indices and wavelengths. Soybean genotypes with a high grain yield have higher means for NDVI and certain wavelengths (735 and 790 nm). Early genotypes have higher means for NDRE and GNDVI. These results reinforce the importance of high-throughput phenotyping as an essential tool in soybean breeding programs.

Abstract The guidance on decision-making regarding deforestation in Amazonia has been efficient as a result of monitoring programs using remote sensing techniques. Thus, the objective of this study was to identify the expansion of soybean farming in disagreement with the Soy Moratorium (SoyM) in the Amazonia biome of Mato Grosso from 2008 to 2019. Deforestation data provided by two Amazonia monitoring programs were used: PRODES (Program for Calculating Deforestation in Amazonia) and ImazonGeo (Geoinformation Program on Amazonia). For the identification of soybean areas, the Perpendicular Crop Enhancement Index (PCEI) spectral model was calculated using a cloud platform. To verify areas (polygons) of largest converted forest-soybean occurrences, the Kernel Density (KD) estimator was applied. Mann–Kendall and Pettitt tests were used to identify trends over the time series. Our findings reveal that 1,387,288 ha were deforested from August 2008 to October 2019 according to PRODES data, of which 108,411 ha (7.81%) were converted into soybean. The ImazonGeo data showed 729,204 hectares deforested and 46,182 hectares (6.33%) converted into soybean areas. Based on the deforestation polygons of the two databases, the KD estimator indicated that the municipalities of Feliz Natal, Tabaporã, Nova Ubiratã, and União do Sul presented higher occurrences of soybean fields in disagreement with the SoyM. The results indicate that the PRODES system presents higher data variability and means statistically superior to ImazonGeo.

The aims of this study were: i) to compare no-till areas in two municipalities located in different regions of Brazil, along with the influence on CO2Flux and GPP, and ii) to verify the difference between environmental factors followed by the trends of these variables regarding future scenarios (ARIMA time-series model number). The study was carried out in two areas with different latitudes in the municipalities of Sinop-MT and Passo Fundo-RS, both in Brazil. A time series of 19 years was performed with data acquired by remote sensing from the following satellites: i) Landsat-8 (OLI and TIRS), and ii) TERRA/AQUA (MODIS). The results propound that the spectro-temporal variables are directly influenced by soil management and agricultural practices over the observation time, with a satisfactory correlation in future predictions of the variables for the next ten years, in which presented that the variation of GPP and albedo values for the two study sites would gradually increase until 2028 and the temperature remained constant between the range of its seasonality, and CO2Flux tends to decrease in its seasonality, indicating a higher CO2 absorption.

The Amazon region comprises the largest tropical forest on the planet and is responsible for absorbing huge amounts of CO2 from the atmosphere. However, changes in land use and cover have contributed to an increase in greenhouse gas emissions, especially CO2, and in endangered indigenous lands and protected areas in the region. The objective of this study was to detect changes in CO2 emissions and removals associated with land use and land cover changes in the Brazilian Legal Amazon (BLA) through the analysis of multispectral satellite images from 2009 to 2019. The Gross Primary Production (GPP) and CO2Flux variables were estimated by the MODIS sensor onboard Terra and Aqua satellite, representing carbon absorption by vegetation during the photosynthesis process. Atmospheric CO2 concentration was estimated from the GOSAT satellite. The variables GPP and CO2Flux showed the effective flux of carbon in the BLA to atmosphere, which were weakly correlated with precipitation (r = 0.191 and 0.133). The forest absorbed 211.05 TgC annually but, due to its partial conversion to other land uses, the loss of 135,922.34 km2 of forest area resulted in 5.82 TgC less carbon being absorbed. Pasture and agriculture, which comprise the main land conversions, increased by 100,340.39 km2 and absorbed 1.32 and 3.19 TgC less, and emitted close to twice more, than forest in these areas. Atmospheric CO2 concentrations increased from 2.2 to 2.8 ppm annually in BLA, with hotspots observed in the southeast Amazonia, and CO2 capture by GPP showed an increase over the years, mainly after 2013, in the north and west of the BLA. This study brings to light the carbon dynamics, by GPP and CO2Flux models, as related to the land use and land cover in one of the biggest world carbon reservoirs, the Amazon, which is also important to fulfillment of international agreements signed by Brazil to reduce greenhouse gas emissions and for biodiversity conservation and other ecosystem services in the region.

Using spectral data to quantify nitrogen (N), phosphorus (P), and potassium (K) contents in soybean plants can help breeding programs develop fertilizer-efficient genotypes. Employing machine learning (ML) techniques to classify these genotypes according to their nutritional content makes the analyses performed in the programs even faster and more reliable. Thus, the objective of this study was to find the best ML algorithm(s) and input configurations in the classification of soybean genotypes for higher N, P, and K leaf contents. A total of 103 F2 soybean populations were evaluated in a randomized block design with two repetitions. At 60 days after emergence (DAE), spectral images were collected using a Sensefly eBee RTK fixed-wing remotely piloted aircraft (RPA) with autonomous take-off, flight plan, and landing control. The eBee was equipped with the Parrot Sequoia multispectral sensor. Reflectance values were obtained in the following spectral bands (SBs): red (660 nm), green (550 nm), NIR (735 nm), and red-edge (790 nm), which were used to calculate the vegetation index (VIs): normalized difference vegetation index (NDVI), normalized difference red edge (NDRE), green normalized difference vegetation index (GNDVI), soil-adjusted vegetation index (SAVI), modified soil-adjusted vegetation index (MSAVI), modified chlorophyll absorption in reflectance index (MCARI), enhanced vegetation index (EVI), and simplified canopy chlorophyll content index (SCCCI). At the same time of the flight, leaves were collected in each experimental unit to obtain the leaf contents of N, P, and K. The data were submitted to a Pearson correlation analysis. Subsequently, a principal component analysis was performed together with the k-means algorithm to define two clusters: one whose genotypes have high leaf contents and another whose genotypes have low leaf contents. Boxplots were generated for each cluster according to the content of each nutrient within the groups formed, seeking to identify which set of genotypes has higher nutrient contents. Afterward, the data were submitted to machine learning analysis using the following algorithms: decision tree algorithms J48 and REPTree, random forest (RF), artificial neural network (ANN), support vector machine (SVM), and logistic regression (LR, used as control). The clusters were used as output variables of the classification models used. The spectral data were used as input variables for the models, and three different configurations were tested: using SB only, using VIs only, and using SBs+VIs. The J48 and SVM algorithms had the best performance in classifying soybean genotypes. The best input configuration for the algorithms was using the spectral bands as input.

Precipitation is crucial for the hydrological cycle and is directly related to many ecological processes. Historically, measurements of precipitation totals were made at weather stations, but spatial and temporal coverage suffered due to the lack of a robust network of weather stations and temporal gaps in observations. Several products have been proposed to identify the location of the occurrence of precipitation and measure its intensity from different types of estimates, based on alternative data sources, that have global (or quasi-global) coverage with long historical time series. However, there are concerns about the accuracy of these estimates. The objective of this study is to evaluate the accuracy of the ERA5 product for two ecoregions of the Canadian Prairies through comparison with monthly means measured from 1981–2019 at ten weather stations (in-situ), as well as to assess the intraseasonal variability of precipitation and identify dry and wet periods based on the annual Standardized Precipitation Index (SPI) derived from ERA5. A significant relationship between in-situ data and ERA5 data (with the R2 varying between 0.42 and 0.76) (p < 0.01)) was observed in nine of the ten weather stations analyzed, with lower RMSE in the Mixed Ecoregion. The Mean Absolute Percentage Error (MAPE) results showed greater agreement between the datasets in May (average R value of 0.84 and an average MAPE value of 32.33%), while greater divergences were observed in February (average R value of 0.57 and an average MAPE value of 50.40%). The analysis of wet and dry periods, based on the SPI derived from ERA5, and the comparison with events associated with the El Niño-Southern Oscillation (ENSO), showed that from the ERA5 data and the derivation of the SPI it is possible to identify anomalies in temporal series with consistent patterns that can be associated with historical events that have been highlighted in the literature. Therefore, our results show that ERA5 data has potential to be an alternative for estimating precipitation in regions with few in-situ stations or with gaps in the time series in the Canadian Prairies, especially at the beginning of the growing season.

Predicting maize yield using spectral information, temperature, and different irrigation management through machine learning algorithms provide information in a fast, accurate, and non-destructive way. The use of multispectral sensor data coupled with irrigation management in maize allows further exploration of water behavior and its relationship with changes in spectral bands presented by the crop. Thus, the objective of this study was to evaluate, by means of multivariate statistics and machine learning techniques, the relationship between irrigation management and spectral bands in predicting maize yields. Field experiments were carried out over two seasons (first and second seasons) in a randomized block design with four treatments (control and three additional irrigation levels) and eighteen sample repetitions. The response variables analyzed were vegetation indices (IVs) and crop yield (GY). Measurement of spectral wavelengths was performed with the Sensefly eBee RTK, with autonomous flight control. The eBee was equipped with the Parrot Sequoia multispectral sensor acquiring reflectance at the wavelengths of green (550 nm ± 40 nm), red (660 nm ± 40 nm), red-edge (735 nm ± 10 nm), and NIR (790 nm ± 40 nm). The blue length (496 nm) was obtained by additional RGB imaging. Data were subjected to Pearson correlations (r) between the evaluated variables represented by a correlation and scatter plot. Subsequently, the canonical analysis was performed to verify the interrelationship between the variables evaluated. Data were also subjected to machine learning (ML) analysis, in which three different input dataset configurations were tested: using only irrigation management (IR), using irrigation management and spectral bands (SB+IR), and using irrigation management, spectral bands, and temperature (IR+SB+Temp). ML models used were: Artificial Neural Network (ANN), M5P Decision Tree (J48), REPTree Decision Tree (REPT), Random Forest (RF), and Support Vector Machine (SVM). A multiple linear regression (LR) was tested as a control model. Our results revealed that Random Forest has higher accuracy in predicting grain yield in maize, especially when associated with the inputs SB+IR and SB+IR+Temp.

The Brazilian government once again threatens its natural heritage by issuing a decree that liberates the sugarcane plantations in the Pantanal and the Amazon regions. The production of a non-sanctioned crop is likely to become the newest driver of deforestation in these biomes. Direct conversion of forests, migration of livestock to new forested areas, rising land values, the danger of forest fires spreading and of carbon emissions from burning sugarcane during harvesting can all create a carbon balance debt and impact on water balance that could take centuries to offset and will compromise the sustainability of the Brazilian ethanol sector.

This research aimed to analyze the possibility to estimate and automatically map large areas of soybean cultivation through the use of MODIS (Moderate-Resolution Imaging Spectroradiometer) images. Two major techniques were used: GEOgraphic-Object-Based Image Analysis (GEOBIA) and Data Mining (DM). In order to obtain the images, the segmentation algorithm implemented by Definiens Developer was used. A decision tree (DT) was created from a training set previously prepared. Time-series of images from the MODIS sensor aboard the Terra satellite were acquired in order to represent the wide variation of the vegetation pattern along the soybean crop cycle. The time-series data were used only for the CEI index. Furthermore, to compare the results obtained from GEOBIA, the slicing technique was used at the CEI level. After the training, the DT was applied to the vegetation indices generating the thematic map of the spatial distribution of soybean. In accordance with the error matrix and kappa parameter analysis, tests for statistical significance were created. Results indicate that the classification achieved by Kappa coefficients is 0.76. In short, the obtained results proved that combining vegetation indices and time-series data using GEOBIA return promising results for mapping soybean plantation on a regional scale.

Knowledge of the agricultural calendar of crops is essential to better estimate and forecast the cultivation of large-scale crops. The aim of this study was to estimate sowing date (SD), date of maximum vegetative development (DMVD), and harvest date (HD) of soybean and corn in the state of Paraná, Brazil. Dates from 120 farms and the Enhanced Vegetation Index (EVI) from the Moderate Resolution Imaging Spectroradiometer (MODIS) from 2011 to 2014 were used into a seasonal trend analysis to obtain soybean and corn seasonal patterns. The results indicate that the majority soybean is sown during October and the DMVD occurs between the second ten-day period of December and the first ten-day period of January. Owing to the spatial variability of the SD, the difference in the maturation cycles of the cultivars, and regional climatic variation, the HD of soybean varied greatly during the studied crop years, ranging from mid-February to late March. The SD of corn is before that of soybean, and mainly occurs in late September to mid-October. The DMVD mainly occurs during December, and the HD is distributed throughout January to March in Paraná. When comparing the estimated dates with observed dates the mean error (ME) varied from 0.2 days earlier to 3.3 days after the observed date for soybean with root mean square error (RMSE) from 1.93 to 14.73 days. For corn, the ME varied from 10.3 days to 18.5 days after the observed date with RMSE from 18.02 to 27.82 days.

Studies on the adaptability and stability are fundamental for plant breeding as they are an alternative to reduce the effects of genotypes x environments interaction (GxE). Moreover, they help identify cultivars with predictable behavior, which are responsive to environmental improvements, subsidizing cultivar recommendation. This study aimed to investigate the genotypes x environments interaction in cotton genotypes grown in the Brazilian Cerrado and identify genotypes for favorable and unfavorable environments. During the 2013/2014 and 2014/2015 seasons, 19 competition trials were carried out with cotton in a randomized block design, with 12 treatments, and four replications. The traits cotton seed yield, fiber percentage, fiber length, and fiber strength were evaluated. Results revealed significant GxE interaction for all the fiber traits evaluated. Genotype BRS 369 RF revealed general adaptability and high predictability for the fiber traits evaluated.

Populations of white-lipped peccaries, Tayassu pecari, have already been extirpated or drastically reduced in much of the Neotropics, but are still relatively abundant in the Brazilian state of Mato Grosso, the country's largest maize and soy producer. This article synthesises over a decade of experience both visiting farms which experienced crop damage and working with hunters, farmers and technicians who live in areas of conflict with T. pecari. These social ungulates feed within maize plantations bordering forest fragments during the entire cultivation cycle and farmers in Mato Grosso vociferously protest the severe economic losses they cause. To protect their crops from damage, farmers slaughter white-lipped peccaries using firearms, traps and mass poisoning. We also draw attention to the need to mitigate the damage caused in agricultural frontiers by this ecologically important species, such that it is not decimated as it has been in the Caatinga and Atlantic Forest biomes.

The objective of this research was to distinguish and estimate cultivated areas of soybean and corn in Paraná State, Brazil, in the 2014/2015 crop season. The main obstacle in mapping summer crops using vegetation index images is to separate the cultivated areas with soybean and corn. These crops planted in a similar period present similar spectral signatures. Thus, with the use of Data Mining techniques (DM) and Artificial Neural Network (ANN) it was possible to carry out the crop mapping, even for those that present similarities in spectral-temporal profile of vegetation indexes. The accuracy obtained in the mappings resulted in a KI (Kappa Index) of 0.78 and 89% of OA (overall accuracy) indicating a high accuracy in the separation of soybean and corn summer crops.

This study aimed to estimate the predicted genetic gains with the simultaneous selection of yield traits and soluble solids content in cherry tomato hybrids. Twenty cherry tomato hybrids were evaluated in hydroponic cultivation in randomized block design with three replicates. The following traits were evaluated: number of clusters per plant, number of flowers per cluster, number of fruits per cluster, number of fruits per plant, fruit weight, fruit yield per plant, and total soluble solids content. The parameters of heritability, experimental cv, and genotypic cv were estimated. Subsequently, selection gains by direct selection and Mulamba and Mock index were estimated. Direct selection of cherry tomato hybrids for fruit yield and soluble solids content is inefficient because selection based on one of these traits will provide undesirable gains in the other. However, simultaneous selection for yield and taste quality is possible based on the Mulamba and Mock index because the methodology provided high selection gains for both yield and soluble solids content.

Caatinga biome, located in the Brazilian semi-arid region, is the most populous semi-arid region in the world, causing intensification in land degradation and loss of biodiversity over time. The main objective of this paper is to determine and analyze the changes in land cover and use, over time, on the biophysical parameters in the Caatinga biome in the semi-arid region of Brazil using remote sensing. Landsat-8 images were used, along with the Surface Energy Balance Algorithm for Land (SEBAL) in the Google Earth Engine platform, from 2013 to 2019, through spatiotemporal modeling of vegetation indices, i.e., leaf area index (LAI) and vegetation cover (VC). Moreover, land surface temperature (LST) and actual evapotranspiration (ETa) in Petrolina, the semi-arid region of Brazil, was used. The principal component analysis was used to select descriptive variables and multiple regression analysis to predict ETa. The results indicated significant effects of land use and land cover changes on energy balances over time. In 2013, 70.2% of the study area was composed of Caatinga, while the lowest percentages were identified in 2015 (67.8%) and 2017 (68.7%). Rainfall records in 2013 ranged from 270 to 480 mm, with values higher than 410 mm in 46.5% of the study area, concentrated in the northern part of the municipality. On the other hand, in 2017 the lowest annual rainfall values (from 200 to 340 mm) occurred. Low vegetation cover rate was observed by LAI and VC values, with a range of 0 to 25% vegetation cover in 52.3% of the area, which exposes the effects of the dry season on vegetation. The highest LST was mainly found in urban areas and/or exposed soil. In 2013, 40.5% of the region’s area had LST between 48.0 and 52.0 °C, raising ETa rates (~4.7 mm day−1). Our model has shown good outcomes in terms of accuracy and concordance (coefficient of determination = 0.98, root mean square error = 0.498, and Lin’s concordance correlation coefficient = 0.907). The significant increase in agricultural areas has resulted in the progressive reduction of the Caatinga biome. Therefore, mitigation and sustainable planning is vital to decrease the impacts of anthropic actions.

The Amazon Basin is undergoing extensive environmental degradation as a result of deforestation and the rising occurrence of fires. The degradation caused by fires is exacerbated by the occurrence of anomalously dry periods in the Amazon Basin. The objectives of this study were: (i) to quantify the extent of areas that burned between 2001 and 2019 and relate them to extreme drought events in a 20-year time series; (ii) to identify the proportion of countries comprising the Amazon Basin in which environmental degradation was strongly observed, relating the spatial patterns of fires; and (iii) examine the Amazon Basin carbon balance following the occurrence of fires. To this end, the following variables were evaluated by remote sensing between 2001 and 2019: gross primary production, standardized precipitation index, burned areas, fire foci, and carbon emissions. During the examined period, fires affected 23.78% of the total Amazon Basin. Brazil had the largest affected area (220,087 fire foci, 773,360 km2 burned area, 54.7% of the total burned in the Amazon Basin), followed by Bolivia (102,499 fire foci, 571,250 km2 burned area, 40.4%). Overall, these fires have not only affected forests in agricultural frontier areas (76.91%), but also those in indigenous lands (17.16%) and conservation units (5.93%), which are recognized as biodiversity conservation areas. During the study period, the forest absorbed 1,092,037 Mg of C, but emitted 2908 Tg of C, which is 2.66-fold greater than the C absorbed, thereby compromising the role of the forest in acting as a C sink. Our findings show that environmental degradation caused by fires is related to the occurrence of dry periods in the Amazon Basin.

In soybean, there is a lack of research aiming to compare the performance of machine learning (ML) and deep learning (DL) methods to predict more than one agronomic variable, such as days to maturity (DM), plant height (PH), and grain yield (GY). As these variables are important to developing an overall precision farming model, we propose a machine learning approach to predict DM, PH, and GY for soybean cultivars based on multispectral bands. The field experiment considered 524 genotypes of soybeans in the 2017/2018 and 2018/2019 growing seasons and a multitemporal–multispectral dataset collected by embedded sensor in an unmanned aerial vehicle (UAV). We proposed a multilayer deep learning regression network, trained during 2000 epochs using an adaptive subgradient method, a random Gaussian initialization, and a 50% dropout in the first hidden layer for regularization. Three different scenarios, including only spectral bands, only vegetation indices, and spectral bands plus vegetation indices, were adopted to infer each variable (PH, DM, and GY). The DL model performance was compared against shallow learning methods such as random forest (RF), support vector machine (SVM), and linear regression (LR). The results indicate that our approach has the potential to predict soybean-related variables using multispectral bands only. Both DL and RF models presented a strong (r surpassing 0.77) prediction capacity for the PH variable, regardless of the adopted input variables group. Our results demonstrated that the DL model (r = 0.66) was superior to predict DM when the input variable was the spectral bands. For GY, all machine learning models evaluated presented similar performance (r ranging from 0.42 to 0.44) for each tested scenario. In conclusion, this study demonstrated an efficient approach to a computational solution capable of predicting multiple important soybean crop variables based on remote sensing data. Future research could benefit from the information presented here and be implemented in subsequent processes related to soybean cultivars or other types of agronomic crops.

The growing quest for sustainability in agricultural production systems has been pushing researchers to develop new technologies under different soil and climatic conditions. Based on this, and knowing the socioeconomic importance of the bean, the use of biological nitrogen fixation (BNF) is explored. Thus, the quest for quantitative knowledge of BNF at the phenological stages in a new bean line using promising and commercial strains becomes necessary. The objective of this study was to evaluate the strains UFLA 02 100 and CIAT 899 in the different phenological stages of the LEP 02 11 common bean strain using the biological nitrogen fixation. The experiment was conducted in a greenhouse on the Maringá-PR campus of the State University of Maringá. The design was a randomized complete block design in a 6x4 factorial scheme with four replications. The factor A comprised six nitrogen sources: Control, strain UFLA 02 100, strain CIAT 899, Nitrogen 60 kg ha-1, strain UFLA 02 100 + Nitrogen 30 kg ha-1, strain CIAT 899 + Nitrogen 30 kg ha-1 and the B factor is the phenological stages V4, R5, R6 and R8. The analyzed variables were: dry mass of nodules (DMN, grams/plant), dry mass of shoot (DMS, grams/plant), nitrogen content in shoot (NCS, %) and accumulation of nitrogen in shoot (ANS, grams/plant). For the statistical analysis of the data, the means test was used for the variables in the stages. The CIAT 899 strain statistically outperformed UFLA 02 100 for most variables and it was found that nitrogen fertilization negatively affected nodulation.

The objective of this study was to evaluate the space-time dynamics of the soil use and occupation of the Rio Roncador river basin between 1985 and 2010. The scenes were classified by two methods (partially unsupervised - K-Means and supervised - Maximum likelihood), the Thematic Mapper sensor products on the LANDSAT 5 orbital platform were used for both images of a 25-year time series (1985 to 2000). In order to measure the accuracy of the field the computer application Google Earth was used, in which nine classes (urban area, agricultural area, pasture, exposed soil, native forest, secondary vegetation, mangrove, altitude field and water) were collected. A multiple linear regression was performed, correlating the Normalized Difference Vegetation Index - mean NDVI (dependent variable) with the independent climatic variables (global solar radiation - MJm-2day-1, average air temperature - °C, relative humidity -%, evapotranspiration - mm d-1, and rain - mm). According to the general classification by Kappa parameter of the images for 2005 and 2010, they were identified as very good (68% and 74%). These results confirm that the Roncador River Basin is undergoing transformation in its landscape, with an average reduction of -49% in native vegetation areas due to the increase in urban areas (25%) and agriculture (31%). The statistical analysis showed that rainfall and air temperature were the only variables that presented significant sigma (0.04) and (0.02). The obtained coefficient of determination indicated that 47% of the variations of the "vegetation index" are explained by the environmental variables.

Under ideal conditions of nitrogen (N), maize (Zea mays L.) can grow to its full potential, reaching maximum plant height (PH). As a rapid and nondestructive approach, the analysis of unmanned aerial vehicles (UAV)-based imagery may be of assistance to estimate N and height. The main objective of this study is to present an approach to predict leaf nitrogen concentration (LNC, g kg−1) and PH (m) with machine learning techniques and UAV-based multispectral imagery in maize plants. An experiment with 11 maize cultivars under two rates of N fertilization was carried during the 2017/2018 and 2018/2019 crop seasons. The spectral vegetation indices (VI) normalized difference vegetation index (NDVI), normalized difference red-edge index (NDRE), green normalized difference vegetation (GNDVI), and the soil adjusted vegetation index (SAVI) were extracted from the images and, in a computational system, used alongside the spectral bands as input parameters for different machine learning models. A randomized 10-fold cross-validation strategy, with a total of 100 replicates, was used to evaluate the performance of 9 supervised machine learning (ML) models using the Pearson’s correlation coefficient (r), mean absolute error (MAE), coefficient of regression (R²), and root mean square error (RMSE) metrics. The results indicated that the random forest (RF) algorithm performed better, with r and RMSE, respectively, of 0.91 and 1.9 g.kg−¹ for LNC, and 0.86 and 0.17 m for PH. It was also demonstrated that VIs contributed more to the algorithm’s performances than individual spectral bands. This study concludes that the RF model is appropriate to predict both agronomic variables in maize and may help farmers to monitor their plants based upon their LNC and PH diagnosis and use this knowledge to improve their production rates in the subsequent seasons.

The objective of this study was to perform a temporal and spatial analysis of the changes in the past global solar radiation based on climate models and remote sensing data in the State of Rio de Janeiro, Brazil for the baseline period (1961-1990). Data from two climate models - the Canadian Centre for Climate Modelling and Analysis and Geophysical Fluid Dynamic Laboratory, were used for the A1B intermediate scenario, data from Conventional Weather Stations and orbital sensor Moderate Resolution Imaging Spectroradiometer (MODIS) MODIS Land Cover Type (MCD12Q1). The results of the Spatial Dependence Degree indicate that the best model to represent the global solar radiation is CCCMA-Exponential dry 70.01 and rainy 0.21 respectively. It was possible to verify that in places where the areas are occupied by forests there was reduction of global solar radiation for both dry and rainy periods of approximately 13 MJ m-2d-1. These results indicate that these forest areas can function as islands of freshness, while maintaining the thermal comfort balanced. It was concluded that the dry period had the highest values of solar radiation compared to the rainy (57%), which can be justified by the occurrence of fires in Rio de Janeiro.

The aim of this study was to determine the probable monthly rainfall for the state of Mato Grosso do Sul, considering the level of 75% probability, and study the spatial distribution associated with its different biomes. The rainfall data of 32 stations (sites) in the state of Mato Grosso do Sul were collected in the period 1954-2013. In each of the 384 series, the average monthly rainfall was calculated, for at least 30 years of observation. The Kolmogorov-Smirnov adhesion test was applied to the rainfall time series to check the fit of the data to a normal distribution. The likely fallout was estimated at 75% probability, using the normal probability distribution and, subsequently, it was adopted the method of Ordinary Kriging interpolation mathematics to spatial data. Based on the likely monthly precipitation estimated, the State of Mato Grosso do Sul possess three distinct periods, with the precipitation associated with different biomes: the rainy season (between the months November to March, where increased precipitation occurred in the Savanna biome), dry season (between the months from June to August, when the highest rainfall occurred in the Atlantic Forest) and transition period (April and May and September and October).

The increasing use of natural resources in a disorderly way has been demanding constant monitoring and ecological-economic zoning. The knowledge on land use and cover allows that measures that guarantee the preservation, maintenance of the environment and space management be appropriate to the reality, since through these factors it is possible to follow the probable environmental impacts and the socioeconomic development of a place in several contexts. The Geographical Information System (GIS) and remote sensing techniques have been applied to land use and land cover mapping. This study aimed to analyze the conversion of land use from different perspectives, concerning geoprocessing techniques, in the southeastern of Roraima State, Brazil, in two distinct periods. In order to verify the land use and cover, two analyses were conducted, using the Spring and TerraView softwares. Great part of the cultivated areas was converted into capoeira, what probably denotes an ending of profitable agriculture, as well as its abandonment caused by the nutritional deficiency of the soil, that became inappropriate for cultivation in the subsequent years. A fuzzy logic would possibly fit well to the types of data analyzed, because the attribute query is overly complex.

O mapeamento das áreas agrícolas de uma determinada região é de fundamental importância, uma vez que se pode conhecer as condições das lavouras e inferir sobre produção e produtividade. O agronegócio exerce grande influência em diferentes setores da economia, tendo repercussões, também, sobre a dinâmica social. Assim, informações antecipadas sobre as condições das lavouras permitem ao governo e à diversas instituições ligadas ao agronegócio o planejamento de políticas de apoio à produção agrícola, levando à maximização dos lucros ou minimização de possíveis prejuízos. Nesse contexto, tecnologias de sensoriamento remoto e geoprocessamento assumem importância ímpar, já que podem monitorar, mapear e quantificar as áreas de produção agrícola. O bjetivou-se com o presente trabalho mapear as áreas agrícolas do município de Londrina em cinco safras de verão, confrontando os resultados obtidos com os dados oficiais. Foram utilizadas imagens Landsat 5 e 7 de cinco diferentes safras. Realizou-se o processamento digital e classificação do uso do solo das imagens por meio do software Spring e classificador Maxver, respectivamente. Os resultados obtidos apontaram baixa precisão da metodologia utilizada, de modo que houve grande superestimação dos dados em duas safras e subestimação dos dados em três safras. Conclui-se que a metodologia utilizada possui grande potencial de aplicabilidade desde que atendidos alguns pressupostos, como maior disponibilidade das imagens, melhoria na qualidade das imagens e disponibilização de dados oficiais seriados em safra de verão e inverno.

Phosphorus shortage in the Savanna is one of the main limiting factors for forage production and directly responsible for the degradation of pastures in this Brazilian region. Thus, the aim of this study was to evaluate the effect of increasing doses of P on the initial development and forage production of four cultivars of P. maximum. The experiment was conducted during the months of December 2010 to May 2011 at Universidade Estadual de Mato Grosso do Sul, Unit of Aquidauana-MS. It was used the completely randomized design in a factorial scheme 4x5, with four replications. The experimental unit consists of polyethylene pots with 5 L capacity arranged in countertop in greenhouse. The first factor consisted of four P. maximum cultivars (Massai, Mombaça, Ãries and Atlas), while the second factor consists of five doses of phosphorus (0, 5, 10, 30 and 45 mg dm-3). It was evaluated the following morphometric traits: plant height, length and width of the leaf blade, number of tillers, dry mass of shoot and of roots at 60 DAS. The approximate dose of 25 mg dm-3 of phosphorus provided better initial development and forage production in all cultivars evaluated of Panicum maximum. Mombaça cultivar has better initial development and forage production about to the others.

Os diferentes sistemas de preparo do solo promovem modificações nos atributos físicos como agregação, densidade e porosidade. Estes atributos funcionam como indicadores de possíveis restrições ao crescimento radicular das culturas. O objetivo deste trabalho foi o de avaliar as modificações na estrutura física do solo cultivado com a cultura da cana-de-açúcar, submetido a diferentes tipos de preparo na bem como o custo de cada operação para avaliação econômica. O estudo foi realizado em fevereiro de 2009 na área experimental da Usina ETH-Unidade Eldorado, sendo avaliadas as características de densidade, porosidade total, umidade e resistência à penetração do solo (RP) nas profundidades de 0-0,20 m e 0,20-0,40 m. O cultivo mínimo mostrou maiores valores de resultados para a densidade do solo, tanto para camada 0-0,20 m quanto 0,20-0,40 m de profundidade. A resistência à penetração foi menor na camada de 0-0,20 m nos preparos convencionais I, II, e III. O cultivo mínimo e a subsolagem apresentaram maiores valores de resistência na camada de 0,20-0,40 m.

Estudou-se o efeito de diferentes sistemas de preparos do solo onde foram analisadas a viabilidade econômica na produção e atributos técnológicos da cana-de-açúcar em áreas cultivadas anteriormente com soja no município de Rio Brilhante-MS, Brasil, considerando os atributos físicos de um Latossolo Vermelho distrófico. Os sistemas de preparo utilizados foram: preparos convencionais (PCI, PCII e PCIII), subsolagem (S) e plantio direto (PD), formando um delineamento experimental em blocos inteiramente casualizados, com cinco repetições, que foram analisadas pelo teste F (p < 0,05), seguido pelo teste de Tukey (p < 0,05). Foram identificadas diferenças significativas entre os tratamentos para variável densidade do solo e porosidade total nas camadas 0,21-0,40 m de profundidade. A produtividade e o número de perfilhos não apresentaram diferenças significativas, porém observando o custo de implantação de cada tratamento, constatou-se maior viabilidade econômica no sistema de plantio direto (PD).We studied the effect of different tillage systems where soil analyzed the economic feasibility of manufacturing and technological attributes of sugar cane cultivated in an area formely with soybean in Rio Brilhante-MS, Brazil, considering the physical attributes of an Acrustox. The tillage systems were: conventional tillage (CTI, CTII and CTIII), subsoiling (S) and no-tillage (NT), forming a randomized complete block design, with five replicates, which were analyzed by F test (p < 0.05), followed by Tukey test (p < 0.05). Significant differences were found between treatments for variable bulk density and total porosity in layers 0.21 to 0.40 m depth. The yield and tiller number showed no significant differences, but looking at the implementation cost of each treatment, there was greater economic viability in the no-tillage (NT).

A cultura da soja possui características favoráveis para sua identificação e mapeamento por meio de interpretação de imagens de sensores remotos a bordo de satélites.O presente trabalho teve como objetivo comparar os resultados de mapeamento dessa cultura, por meio da interpretação de imagens TM/Landsat-5 e MODIS/Terra para o ano safra 2010/11. O trabalho foi realizado para o município de Maracaju, Mato Grosso do Sul, maior produtor de soja do Estado. Foram adquiridas oito imagens MODIS/Terra no ano de 2010 e quatro em 2011 e uma do TM/Landsat-5 do ano de 2011, compreendendo o período de cultivo da soja na região. De posse das imagens e dos processamentos foram gerados mapas temáticos de áreas de soja, das quais segue: componentes principais de imagem monotemporal TM, monotemporal MODIS com seus respectivos NDVI´s e EVI´s, por meio do classificador supervisionado MaxVer; além disso foi calculado o índice CEI, que no processo de fatiamento de pixels foram obtidas as áreas de soja. As classificações utilizando bandas do TM/Landasat-5 apresentaram excelentes estimativas de áreas de soja indicadas pelas métricas de validação Kappa e exatidão global. No método do índice CEI, neste caso, apresentou inferioridade perante as demais estimativas obtidas, apenas apresentando-se superior a estimativa de área obtida pela imagem monotemporal NDVI/MODIS.

O preparo do solo compreende em média 25% do custo de implantação de um canavial, portanto, medidas para redução deste custo são desejáveis desde que não comprometam a qualidade desta operação e a longevidade do canavial. O objetivo foi avaliar o efeito de diferentes sistemas de preparo num LATOSSOLO VERMELHO distrófico, correlacionando atributos físicos do solo e características agroindustriais da cana planta e da cana soca. Foram utilizados cinco tipos de preparos do solo, distribuídos em delineamento experimental em blocos ao acaso, com cinco repetições. A granulometria foi avaliada a cada 0,1 m até a profundidade 0,4 m, por meio de amostras de solo deformadas coletadas no final do primeiro ciclos de crescimento da cultura. Para os demais atributos físicos do solo: densidade do solo, porosidade total e teor de água, as avaliações foram realizadas no final de cada ciclo, coletando amostras indeformadas nas camadas de 0-0,20 m e 0,21-0,40 m, além da realização da resistência mecânica à penetração, utilizando-se de penetrômetro de impacto. A resposta da cana-de-açúcar em função dos tipos de preparo do solo foi determinada a partir da avaliação da produtividade por hectare de colmo (TCH), de açúcar (TPH), bem como dos valores de pol % (AP), açúcar total recuperável (ATR) e fibra de amostras de colmo coletadas na colheita da cana planta e cana soca. Nos preparos estudados, houve alteração dos atributos físicos do solo, provocando redução da produtividade na safra 2009/2010, quando comparada com a safra 2008/2009. No sistema de preparo de sulcação direta foi observado menor resultado de TCH, principalmente na safra 2009/2010, quando a diferença com o preparo convencional foi de 20,53 Mg ha-1.

O presente estudo teve como objetivo avaliar o desempenho de classificadores supervisionados e não-supervisionados para detecção automática de queimadas em canaviais utilizando imagens de satélite Landsat-5/TM. A área de estudo localiza-se na porção noroeste do município de Maracaju, MS, Brasil. Diferentes métodos de classificação e tratamento de imagem foram testados para mapear a colheita de cana com queima prévia de palha. As imagens foram tratadas com reamostragem para 15m, correção radiométrica e NDVI. Nas classificações, foram utilizados os algoritmos Maxver-ICM, Bhattacharya e ISOSEG. Os diferentes pré-processamentos e classificadores aplicados foram submetidos à validação estatística por meio dos parâmetros Kappa e exatidão global. Os resultados indicaram um expressivo potencial de classificadores supervisionados na identificação de queimadas de cana. Concluiu-se que é possível obter exatidões qualificadas como excelente quando empregado o classificador de Máxima Verossimilhança-ICM.

Considerando que o solo é a base para uma agricultura e uma produção florestal sustentável, é necessário adotar práticas de manejo que conservem e, ou, restaurem sua fertilidade. O estudo foi desenvolvido no município de Concórdia do Pará, na região Norte do Estado do Pará, em Latossolo Vermelho Distroférrico. O delineamento experimental utilizado foi em blocos ao acaso, em esquema fatorial 5 x 2, sendo cinco tratamentos (AP - área de pasto, SAF - área com sistema agroflorestal, MN - área de mata nativa, CP - área de capoeira e CM - área cultivada com mandioca) e duas profundidades (0-0,10 m e 0,10-0,20 m), com cinco repetições. Os resultados foram avaliados pela análise de variância (ANOVA), seguido do teste de Tukey (p

Nas técnicas de manejo adotadas na cultura do milho, como espaçamento entre linhas e diferentes densidades de plantas, se faz necessário para avaliar as cultivares, uma vez que novos genótipos disponíveis no mercado são mais produtivos em relação aos mais antigos, onde tais técnicas têm como finalidade o aumento de produtividade. Assim, o objetivo deste trabalho foi avaliar os efeitos da combinação entre diferentes espaçamentos entre linhas e híbridos de milho na produtividade da cultura na Região de Cerrado do Estado de Mato Grosso do Sul. O experimento foi realizado na Unidade Universitária de Aquidauana - Universidade Estadual de Mato Grosso do Sul, sendo o solo da área classificado como Argissolo Vermelho Amarelo distrófico. O delineamento estatístico utilizado foi o de blocos ao acaso em esquema fatorial (6 x 2), com quatro repetições.Os tratamentos foram compostos pela combinação entre seis híbridos (AG 9040, DKB 330, Pioneer 30F35, 2B707, 2B688 e 2B433) e dois espaçamentos entre linhas (0,45 e 0,90 m). Posterior a semeadura, foram avaliados: altura de plantas, diâmetro do colmo e a produtividade de grãos e seus compostos. Os resultados apresentaram que nas avaliações realizadas não houve interação entre os híbridos e espaçamentos e que no aumento do espaçamento promoveu aumento do comprimento e do número de fileiras da espiga. Entretanto, quando utilizado menor espaçamento entre linhas houve acréscimo na produtividade.

O presente trabalho teve como objetivo estudar o desempenho germinativo de sementes comuns, escarificadas e revestidas de diferentes espécies de Brachiaria spp. e Panicum spp. Foram utilizadas sementes forrageiras das seguintes espécies: braquiária (B. decumbens, B. humidicola e B. brizantha cv. Piatã) e cultivares de Panicum maximum (Mombaça, Tanzânia e Massai). Para as sementes comuns foi realizada apenas a retirada das impurezas, submetendo-as duas vezes ao soprador. As sementes foram escarificadas por meio de ácido sulfúrico (H2SO4) e o revestimento utilizando cal, gesso, cola, macro e micronutrientes. O delineamento experimental utilizado foi um fatorial 6x3 (seis forrageiras e três tratamentos de sementes), constituindo 18 tratamentos, com quatro repetições de 100 sementes, distribuídas inteiramente ao acaso, aplicando-se o teste de Tukey (p

The use of summarized spectral data in bands obtained by hyperspectral sensors can make it possible to obtain biochemical information about seeds and, thus, relate the results to seed viability and vigor. Thus, the hypothesis of this work is based on the possibility of obtaining information about the physiological quality of seeds through hyperspectral bands and distinguishing seed lots regarding their quality through wavelengths. The objective was then to evaluate the possibility of differentiating soybean genotypes regarding the physiological quality of seeds using spectral data. The experiment was conducted during the 2021/2022 harvest at the Federal University of Mato Grosso do Sul in a randomized block design with four replicates and 10 F3 soybean populations (G1, G8, G12, G15, G19, G21, G24, G27, G31, and G36). After the maturation of each genotype, seeds were harvested from the central rows of each plot, which consisted of five one-meter rows. Seed samples from each experimental unit were placed in a Petri dish to collect spectral data. Readings were performed in the laboratory at a temperature of 26 °C and using two 60 W halogen lamps as the light source, positioned 15 cm between the sensor and the sample. The sensor used was the Ocean Optics (Florida, USA) model STS-VIS-L-50-400-SMA, which captured the reflectance of the seed sample at wavelengths between 450 and 824 nm. After readings from the hyperspectral sensor, the seeds were subjected to tests for water content, germination, first germination count, electrical conductivity, and tetrazolium. The data obtained were subjected to an analysis of variance and the means were compared by the Scott–Knott test at 5% probability, analyzed using R software version 4.2.3 (Auckland, New Zealand). The data on the physiological quality of the seeds of the soybean genotypes were subjected to principal component analysis (PCA) and associated with the K-means algorithm to form groups according to the similarity and distinction between the genetic materials. After the formation of these groups, spectral curve graphs were constructed for each soybean genotype and for the groups that were formed. The physiological quality of the soybean genotypes can be differentiated using hyperspectral bands. The spectral bands, therefore, provide important information about the physiological quality of soybean seeds. Through the use of hyperspectral sensors and the observation of specific bands, it is possible to differentiate genotypes in terms of seed quality, complementing and/or replacing traditional tests in a fast, accurate, and non-destructive way, reducing the time and investment spent on obtaining information on seed viability and vigor. The results found in this study are promising, and further research is needed in future studies with other species and genotypes. The interval between 450 and 649 nm was the main spectrum band that contributed to the differentiation between soybean genotypes of superior and inferior physiological quality.