Search

At Brady Hot Springs, a geothermal field in Nevada, heated fluids have been extracted, cooled, and re-injected to produce electrical power since 1992. Analysis of daily pumping records and catalogs of microseismicity between 2010 and 2015 indicates a statistically significant correlation between days when the daily volume of production was at or above its long-term average rate and days when no seismic event was detected. Conversely, shutdowns in pumping for plant maintenance correlate with increased microseismicity. We hypothesize that the effective stress in the subsurface has adapted to the long-term normal operations (deep extraction) at the site. Under this hypothesis, extraction of fluids inhibits fault slip by increasing the effective stress on faults; in contrast, brief pumping cessations represent times when effective stress is decreased below its long-term average, increasing the likelihood of microseismicity.

Fractured sedimentary bedrock aquifers represent complex flow systems that may contain fast, fracture‐dominated flow paths and slower, porous media‐dominated flow paths. Thus, characterizing the dynamics of flow and transport through these aquifers remains a fundamental hydrogeologic challenge. Recent studies have demonstrated the utility of a novel hydraulic testing approach, oscillatory flow testing, in field settings to characterize single bedrock fractures embedded in low‐porosity sedimentary bedrock. These studies employed an idealized analytical model assuming Darcian flow through a nondeforming, constant‐aperture, nonleaky fracture for data interpretation, and reported period‐dependent effective fracture flow parameters. Here, we present the application of oscillatory flow testing across a range of frequencies and inter‐well spacings on a fracture embedded in poorly cemented sedimentary bedrock with considerable primary porosity at the Field Site for Research in Fractured Sedimentary Rock. Consistent with previous studies, we show an apparent period‐dependence in returned flow parameters, with hydraulic diffusivity decreasing and storativity increasing with increasing oscillation period, when assuming an idealized fracture conceptual model. We present simple analyses that examine non‐Darcian flow and borehole storage effects as potential test design artifacts and a simple analytical model that examines fluid leakage to the surrounding host rock as a potential hydraulic mechanism that might contribute to the period‐dependent flow parameters. These analyses represent a range of conceptual assumptions about fracture behavior during hydraulic testing, none of which account for the measured responses during oscillatory flow testing, leading us to argue that other hydraulic processes (e.g., aperture heterogeneity and/or fracture hydromechanics) are necessary to accurately represent pressure propagation through fractured sedimentary bedrock. [ABSTRACT FROM AUTHOR]

Increased nitrate concentrations in groundwater and surface waters represent one of the most widespread and acute impacts of modern agriculture on the environment. However, there is often a fundamental gap in understanding how individual agricultural fields and practices contribute to this broad‐scale issue. To practically address nutrient dynamics at individual agricultural sites, methods for assessing nitrogen loss to groundwater that are minimally invasive and thus can encourage farmer "buy in" are necessary. We present an approach that uses edge‐of‐field monitoring at multilevel samplers along with a once‐per‐year tracer application (bromide) to calculate nitrogen loss on an annual basis. Using appropriate spatio‐temporal integrals of measured concentrations, a net loss of nitrogen to groundwater (per field area) can be calculated. This approach directly measures impacts of nitrogen leaching below the water table, while avoiding permanent in‐field installations that can interfere with farm operations. We present an application of this technique to assess nitrogen loss to groundwater over 5 years for a commercial agricultural field in Sauk County, WI. Results from Field 19 indicate that nitrogen losses are similar to (or slightly below) previously reported values for corn and potato crops. In all years, however, we estimate that more than 25% (>60 kg/ha) of nitrogen applied leached as nitrate to groundwater. Use of this mass flux estimation method was most reliable when: (1) tracer is injected directly at the water table, limiting "smearing" within the vadose zone; and (2) nitrate concentrations from laboratory analysis were obtained, rather than using ion‐selective electrodes or nitrate test strips. Article Impact Statement: We demonstrate a minimally invasive monitoring approach that quantifies nitrogen loss to groundwater from an agricultural field over five growing seasons. [ABSTRACT FROM AUTHOR]

Communication of hydrologic data to the public can be improved by connecting data to the places they represent. In our example of data communication, we coupled hydrologic data with simultaneously collected video as both a scientific and public engagement tool. This note presents a method for collecting spatially and temporally dense datasets of water‐quality and geophysical data on small streams and lakes, and for displaying the data in a user‐friendly format using commercially available software. With this method, multiple instruments are mounted on a canoe and a controlled survey float is carried out to collect data. The data stream is georeferenced and logged using an Arduino microcontroller to provide detailed information about spatial variability. We employed these continuous data‐collection methods at small streams and lakes across Wisconsin, USA. Comparison of stream‐float sensor data to lab reported data, data collected by alternative sensors, and previously collected data in our study areas indicates that the low‐cost temperature, electrical conductivity, pH, and dissolved oxygen sensors performed well. GoPro cameras recorded video throughout the duration of data collection. Our established water‐quality and geophysical data collection methods are inexpensive, fast, and reliable, which qualify them as excellent tools for fine‐scale spatial understanding of stream and lake habitats' health. Data‐rich video connects point measurements of water properties to the appearance of the native environment. This method helps improve our understanding of groundwater and surface water interactions in complex hydrogeologic systems, enhance communication amongst stakeholders, and provide context when monitoring and managing sensitive habitats. Article impact statement: Coupling simultaneously recorded hydrologic data with video is a unique opportunity for engaging stakeholders with scientific results. [ABSTRACT FROM AUTHOR]

Characterizing aquifer properties and their associated uncertainty remains a fundamental challenge in hydrogeology. Recent studies demonstrate the use of oscillatory flow interference testing to characterize effective aquifer flow properties. These characterization efforts relate the relative amplitude and phase of an observation signal with a single frequency component to aquifer diffusivity and transmissivity. Here, we present a generalized workflow that relates extracted Fourier coefficients for observation signals with single and multiple frequency components to aquifer flow properties and their associated uncertainty. Through synthetic analytical modeling we show that multi‐frequency oscillatory flow interference testing adds information that improves inversion performance and decreases parameter uncertainty. We show increased observation signal length, sampling frequency, and pressure sensor accuracy all produce decreased parameter uncertainty. This work represents the first attempt we are aware of to quantify effective aquifer parameters and their associated uncertainty using multi‐frequency oscillatory flow interference testing. Article Impact Statement: Multi‐frequency analysis under oscillatory flow conditions improves effective parameter estimates and reduces parameter uncertainty. [ABSTRACT FROM AUTHOR]

Modeling and laboratory experiments have demonstrated the ability of oscillatory hydraulic tomography (OHT) to characterize heterogeneity in aquifer hydraulic properties. In OHT, a location is stressed via periodic pumping/injection at a set frequency, and the resulting head signal is measured at a number of monitoring locations. The source of oscillations is repeatedly moved, allowing tomographic imaging of aquifer properties. Changing the period of oscillation also results in observations with additional information. In theory, OHT is comparable to other hydraulic tomography methods in that distributed pressure change measurements provide characterization information. In practice, OHT has several benefits including: (1) little to no water injected into or extracted from the aquifer; and (2) an observational signal at a set period that can be easily extracted in the presence of noise. We report the first field application of OHT, carried out at the Boise Hydrogeophysical Research Site (BHRS) using an oscillating signal generator with a very small cycling volume of <2 L, and a period range of 5 to 70 s. For these tests, signals were detected at distances of over 15 m. After processing to extract periodic signal properties, we perform tomography using a frequency‐domain numerical model for groundwater flow. In comparing results against prior characterization results from the BHRS, we find moderate to strong positive correlations between K profiles estimated via different methods at multiple wells, with moderate overall correlation between estimated three‐dimensional (3D) K volumes. Article impact statement: Oscillating pumping tests are demonstrated at the field scale as a method for minimally invasive aquifer heterogeneity imaging. [ABSTRACT FROM AUTHOR]

Abstract: An understanding of the spatial and hydraulic properties of fast preferential flow pathways in the subsurface is necessary in applications ranging from contaminant fate and transport modeling to design of energy extraction systems. One method for the characterization of fracture properties over interwellbore scales is Multiperiod Oscillatory Hydraulic (MOH) testing, in which the aquifer response to oscillatory pressure stimulations is observed. MOH tests were conducted on isolated intervals of wells in siliciclastic and carbonate aquifers in southern Wisconsin. The goal was to characterize the spatial properties of discrete fractures over interwellbore scales. MOH tests were conducted on two discrete fractured intervals intersecting two boreholes at one field site, and a nest of three piezometers at another field site. Fracture diffusivity estimates were obtained using analytical solutions that relate diffusivity to observed phase lag and amplitude decay. In addition, MOH tests were used to investigate the spatial extent of flow using different conceptual models of fracture geometry. Results indicated that fracture geometry at both field sites can be approximated by permeable two‐dimensional fracture planes, oriented near‐horizontally at one site, and near‐vertically at the other. The technique used on MOH field data to characterize fracture geometry shows promise in revealing fracture network characteristics important to groundwater flow and transport. [ABSTRACT FROM AUTHOR]

Hydraulic tomography is an emerging field and modeling method that provides a continuous hydraulic conductivity ( K) distribution for an investigated region. Characterization approaches that rely on interpolation between one-dimensional ( 1D) profiles have limited ability to accurately identify high- K channels, juxtapositions of lenses with high K contrast, and breaches in layers or channels between such profiles. However, locating these features is especially important for groundwater flow and transport modeling, and for design and operation of in situ remediation in complex hydrogeologic environments. We use transient hydraulic tomography to estimate 3D K in a volume of 15-m diameter by 20-m saturated thickness in a highly heterogeneous unconfined alluvial (clay to sand-and-gravel) aquifer with a K range of approximately seven orders of magnitude at an active industrial site in Assemini, Sardinia, Italy. A modified Levenberg-Marquardt algorithm was used for geostatistical inversion to deal with the nonlinear nature of the highly heterogeneous system. The imaging results are validated with pumping tests not used in the tomographic inversion. These tests were conducted from three of five clusters of continuous multichannel tubing ( CMTs) installed for observation in the tomographic testing. Locations of high- K continuity and discontinuity, juxtaposition of very high- K and very low- K lenses, and low- K 'plugs' are evident in regions of the investigated volume where they likely would not have been identified with interpolation from 1D profiles at the positions of the pumping well and five CMT clusters. Quality assessment methods identified a suspect high- K feature between the tested volume and a lateral boundary of the model. [ABSTRACT FROM AUTHOR]